Commit 6cc0ca41 authored by Oleg Dzhimiev's avatar Oleg Dzhimiev
parents 3fdd138d 65b0a8bf
...@@ -179,22 +179,21 @@ ...@@ -179,22 +179,21 @@
si5338@70 { si5338@70 {
compatible = "sil,si5338"; compatible = "sil,si5338";
reg = <0x70>; reg = <0x70>;
si5338,init="always"; /* initialize PLL, wait for lock. Other (not yet implemented) option is 'if off'*/
/* low-level masked register writes, may be uaed to load frequency plan */ /* low-level masked register writes, may be uaed to load frequency plan */
si5338,configuration_data=< /*si5338,configuration_data=< 0x1ffcf0 >;*/ /* just for testing: write data 0xfc with write enable mask 0xf0 to register 0x01f */
0x1ffcf0 /* just for testing: write data 0xfc with write enable mask 0xf0 to register 0x01f */ si5338,in_frequency3= < 25000000>; /* 25MHz on input 3 (other inputs are '12",'4','56' and '12xo' */
0x20a0f0 /* just for testing: write data 0xa0 with write enable mask 0xf0 to register 0x020 */
>;
si5338,in_frequency3= < 25000000>; /* 25MHz */
/* PLL may be set either directly (pll_freq_fract,pll_freq_int) or to match some output (pll_by_out_fract, pll_by_out_int) /* PLL may be set either directly (pll_freq_fract,pll_freq_int) or to match some output (pll_by_out_fract, pll_by_out_int)
* _int suffix forces to find integer divisors, _fract - allows fractional ones */ * _int suffix forces to find integer divisors, _fract - allows fractional ones */
si5338,pll_by_out_int=<150000000>; /* 150Mhz May have 3 values: integer, nominator and denominator */ si5338,pll_by_out_int=<150000000>; /* 150Mhz May have 3 values: integer, nominator and denominator */
si5338,out3_freq_int= <150000000>; /* 150Mhz. May have 3 values: integer, nominator and denominator */ si5338,out3_freq_int= <150000000>; /* 150Mhz. May have 3 values: integer, nominator and denominator */
si5338,out2_select= "in3/2/32"; /* connect out2 to IN3, divided by 2 (input stage) and then by 32 (output stage)*/ si5338,out2_select= "in3/2/32"; /* connect out2 to IN3, divided by 2 (input stage) and then by 32 (output stage)*/
si5338,2V5_LVPECL= <1 2>; /* set output standard for channels 1 and 2 */ si5338,2V5_LVPECL= <1 2>; /* set output standard for channels 1 and 2 */
si5338,1V5_HSTL_A+= <0>; /* set output standard for channel 0, only A output is used (noninverted) */ si5338,1V5_HSTL_A+= <0>; /* set output standard for channel 0, only A output is used (noninverted) */
si5338,1V8_LVDS= <3>; si5338,1V8_LVDS= <3>;
/* Disabled state for outputs: */
si5338,dis_hi-z= <0 1 2 3>; /* Disabled state for listed outputs, also possible: "dis_hi-z","dis_low","dis_high","dis_always_on" */
si5338,output_en= < 3>; /* Which outputs should be initially enabled */
}; };
gpio@20{ gpio@20{
compatible = "ti,tca6408"; compatible = "ti,tca6408";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment