added elphel393 MACHINE

conf/machine/elphel393.conf

+#@TYPE: Machine
+#@NAME: elphel393
+#@DESCRIPTION: Machine support for elphel393.
+#              http://www.elphel.com/ 
+
+# Versions corresponding to zedboard documentation
+PREFERRED_VERSION_linux-xlnx ?= "3.8%"
+PREFERRED_VERSION_u-boot-xlnx ?= "v2013.01%"
+
+require conf/machine/include/tune-zynq.inc
+
+# Zedboard machine definition known by Xilinx UBOOT
+UBOOT_MACHINE = "elphel393_config"
+
+SERIAL_CONSOLE = "115200 ttyPS0"
\ No newline at end of file

conf/machine/include/tune-zynq.inc

+DEFAULTTUNE ?= "zynq"
+SOC_FAMILY ?= "zynq"
+
+require conf/machine/include/tune-cortexa9.inc
+require conf/machine/include/soc-family.inc
+
+TUNEVALID[zynq] = "Zynq"
+AVAILTUNES += "zynq"
+
+TUNE_FEATURES_tune-zynq += "${TUNE_FEATURES_tune-armv7a-neon} zynq"
+ARMPKGARCH = "${ARMPKGARCH_tune-armv7a-neon}"
+PACKAGE_EXTRA_ARCHS_tune-zynq = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} zynq"
+
+# Linux Configuration
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
+PREFERRED_VERSION_linux-xlnx ?= "3.8%"
+KERNEL_IMAGETYPE ?= "uImage"
+# Set default load address. 
+# Override with KERNEL_EXTRA_ARGS_<board> += "..." in machine file if required
+KERNEL_EXTRA_ARGS_zynq += "UIMAGE_LOADADDR=0x8000"
+
+# File System Configuration
+IMAGE_FSTYPES ?= "cpio ext2 ext2.gz.u-boot ext2.gz"
+#IMAGE_FSTYPES ?= "ext2.gz.u-boot"
+IMAGE_CLASSES += "image_types_uboot"
+
+# U-Boot Configuration
+PREFERRED_PROVIDER_u-boot ?= "u-boot-xlnx"
+PREFERRED_VERSION_u-boot-xlnx ?= "v2013.01%"

recipes-core/images/elphel393.bb

 DESCRIPTION = "Elphel NC 393 image (based on core-image-minimal)."
 
-IMAGE_INSTALL = "packagegroup-core-boot python-core ${ROOTFS_PKGMANAGE_BOOTSTRAP} ${CORE_IMAGE_EXTRA_INSTALL}"
+IMAGE_INSTALL = "packagegroup-core-boot ${ROOTFS_PKGMANAGE_BOOTSTRAP} ${CORE_IMAGE_EXTRA_INSTALL}"
+
+# remove not needed ipkg informations
+IMAGE_INSTALL_append = " python-core \
+                        i2c-tools \
+                        mtd-utils \
+                        ethtool \
+                        openssh \
+                        net-tools \
+                        modphp \
+                        apache2 \
+                        php-cli"
 
 IMAGE_LINGUAS = " "
 
@@ -8,5 +19,4 @@ LICENSE = "MIT"
 
 inherit core-image
 
-IMAGE_ROOTFS_SIZE = "32768"
-
+IMAGE_ROOTFS_SIZE = "65536"

recipes-kernel/linux/linux-xlnx.inc

+inherit kernel
+
+# This version extension should match CONFIG_LOCALVERSION in defconfig
+LINUX_VERSION_EXTENSION ?= "-xilinx"
+
+require recipes-kernel/linux/linux-yocto.inc
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/linux-xlnx:"
+SRC_URI = "git://github.com/Xilinx/linux-xlnx;protocol=git;nocheckout=1"
+
+PR = "r1"
+PV = "${LINUX_VERSION}${LINUX_VERSION_EXTENSION}+git${SRCPV}"
+
+# Override COMPATIBLE_MACHINE to include your machine in a bbappend file.
+COMPATIBLE_MACHINE = "elphel393"
+
+SRC_URI_append_elphel393 += "file://elphel393_defconfig_${LINUX_VERSION}.cfg \
+                             file://elphel393.dts"
+
+KERNEL_DEVICETREE_elphel393 = "${S}/elphel393.dts"
\ No newline at end of file

recipes-kernel/linux/linux-xlnx/elphel393.dts

+/* */
+/dts-v1/;
+
+/ {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "xlnx,zynq-zc770";
+	model = "Xilinx Zynq";
+
+	aliases {
+		ethernet0 = "/amba@0/ps7-ethernet@e000b000";
+		serial0 = "/amba@0/serial@e0000000";
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 root=/dev/ram rw ip=192.168.0.9 earlyprintk ramdisk_size=65536";
+		linux,stdout-path = "/axi@0/serial@e0000000";
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#cpus = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			compatible = "xlnx,ps7-cortexa9-1.00.a";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "ps7_cortexa9,1.00.a";
+			reg = <0x0>;
+			xlnx,cpu-1x-clk-freq-hz = <0x69f6bcb>;
+			xlnx,cpu-clk-freq-hz = <0x27bc86bf>;
+		};
+
+		cpu@1 {
+			compatible = "xlnx,ps7-cortexa9-1.00.a";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "ps7_cortexa9,1.00.a";
+			reg = <0x1>;
+			xlnx,cpu-1x-clk-freq-hz = <0x69f6bcb>;
+			xlnx,cpu-clk-freq-hz = <0x27bc86bf>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <0x1>;
+		interrupts = <0x0 0x5 0x4 0x0 0x6 0x4>;
+		reg = <0xf8891000 0x1000 0xf8893000 0x1000>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	amba@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "xlnx,ps7-axi-interconnect-1.00.a", "simple-bus";
+		ranges;
+
+		ps7-afi@f8008000 {
+			compatible = "xlnx,ps7-afi-1.00.a";
+			reg = <0xf8008000 0x1000>;
+		};
+
+		ps7-afi@f8009000 {
+			compatible = "xlnx,ps7-afi-1.00.a";
+			reg = <0xf8009000 0x1000>;
+		};
+
+		ps7-afi@f800a000 {
+			compatible = "xlnx,ps7-afi-1.00.a";
+			reg = <0xf800a000 0x1000>;
+		};
+
+		ps7-afi@f800b000 {
+			compatible = "xlnx,ps7-afi-1.00.a";
+			reg = <0xf800b000 0x1000>;
+		};
+
+		ps7-ddrc@f8006000 {
+			compatible = "xlnx,ps7-ddrc-1.00.a", "xlnx,ps7-ddrc";
+			reg = <0xf8006000 0x1000>;
+			xlnx,has-ecc = <0x0>;
+		};
+
+		ps7-dev-cfg@f8007000 {
+			compatible = "xlnx,ps7-dev-cfg-1.00.a";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x8 0x4>;
+			reg = <0xf8007000 0x1000>;
+		};
+
+		ps7-dma@f8003000 {
+			#dma-cells = <0x1>;
+			#dma-channels = <0x8>;
+			#dma-requests = <0x4>;
+			arm,primecell-periphid = <0x41330>;
+			compatible = "xlnx,ps7-dma-1.00.a", "arm,primecell", "arm,pl330";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0xd 0x4 0x0 0xe 0x4 0x0 0xf 0x4 0x0 0x10 0x4 0x0 0x11 0x4 0x0 0x28 0x4 0x0 0x29 0x4 0x0 0x2a 0x4 0x0 0x2b 0x4>;
+			reg = <0xf8003000 0x1000>;
+		};
+
+		ps7-ethernet@e000b000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "xlnx,ps7-ethernet-1.00.a";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x16 0x1>;
+			local-mac-address = [00 0a 35 00 00 00];
+			phy-handle = <0x2>;
+			phy-mode = "rgmii-id";
+			reg = <0xe000b000 0x1000>;
+			xlnx,enet-clk-freq-hz = <0x7735940>;
+			xlnx,enet-reset = <0xffffffff>;
+			xlnx,enet-slcr-1000mbps-div0 = <0x8>;
+			xlnx,enet-slcr-1000mbps-div1 = <0x1>;
+			xlnx,enet-slcr-100mbps-div0 = <0x8>;
+			xlnx,enet-slcr-100mbps-div1 = <0x5>;
+			xlnx,enet-slcr-10mbps-div0 = <0x8>;
+			xlnx,enet-slcr-10mbps-div1 = <0x32>;
+			xlnx,eth-mode = <0x1>;
+			xlnx,has-mdio = <0x1>;
+			xlnx,ptp-enet-clock = <0x69f6bcb>;
+
+			mdio {
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+
+				phy@3 {
+					compatible = "atheros,8035";
+					device_type = "ethernet-phy";
+					reg = <0x3>;
+					linux,phandle = <0x2>;
+					phandle = <0x2>;
+				};
+			};
+		};
+
+		ps7-i2c@e0004000 {
+			bus-id = <0>;
+			compatible = "xlnx,ps7-i2c-1.00.a";
+			i2c-clk = <400000>;
+			input-clk = <111111114>;
+			interrupt-parent = <0x1>;
+			interrupts = < 0 25 4 >;
+			reg = < 0xe0004000 0x1000 >;
+			xlnx,has-interrupt = <0x0>;
+			xlnx,i2c-clk-freq-hz = <0x69f6bcb>;
+			xlnx,i2c-reset = "";
+		} ;
+
+		ps7-gpio@e000a000 {
+			#gpio-cells = <0x2>;
+			compatible = "xlnx,ps7-gpio-1.00.a";
+			emio-gpio-width = <0x40>;
+			gpio-controller;
+			gpio-mask-high = <0xc0000>;
+			gpio-mask-low = <0xfe81>;
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x14 0x4>;
+			reg = <0xe000a000 0x1000>;
+		};
+
+		ps7-iop-bus-config@e0200000 {
+			compatible = "xlnx,ps7-iop-bus-config-1.00.a";
+			reg = <0xe0200000 0x1000>;
+		};
+
+		ps7-pl310@f8f02000 {
+			arm,data-latency = <0x3 0x2 0x2>;
+			arm,tag-latency = <0x2 0x2 0x2>;
+			cache-level = <0x2>;
+			cache-unified;
+			compatible = "xlnx,ps7-pl310-1.00.a", "arm,pl310-cache";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x2 0x4>;
+			reg = <0xf8f02000 0x1000>;
+		};
+
+		ps7-qspi-linear@fc000000 {
+			compatible = "xlnx,ps7-qspi-linear-1.00.a";
+			reg = <0xfc000000 0x1000000>;
+			xlnx,qspi-clk-freq-hz = <0xe4e1c0>;
+		};
+
+		ps7-ram@0 {
+			compatible = "xlnx,ps7-ram-1.00.a", "xlnx,ps7-ocm";
+			reg = <0xfffc0000 0x40000>;
+		};
+
+		ps7-scugic@f8f01000 {
+			#address-cells = <0x2>;
+			#interrupt-cells = <0x3>;
+			#size-cells = <0x1>;
+			compatible = "xlnx,ps7-scugic-1.00.a", "arm,cortex-a9-gic", "arm,gic";
+			interrupt-controller;
+			linux,phandle = <0x1>;
+			phandle = <0x1>;
+			reg = <0xf8f01000 0x1000 0xf8f00100 0x100>;
+		};
+
+		ps7-scutimer@f8f00600 {
+			compatible = "xlnx,ps7-scutimer-1.00.a", "arm,cortex-a9-twd-timer";
+			interrupt-parent = <0x1>;
+			interrupts = <0x1 0xd 0x301>;
+			reg = <0xf8f00600 0x20>;
+		};
+
+		ps7-scuwdt@f8f00620 {
+			compatible = "xlnx,ps7-scuwdt-1.00.a";
+			device_type = "watchdog";
+			interrupt-parent = <0x1>;
+			interrupts = <0x1 0xe 0x301>;
+			reg = <0xf8f00620 0xe0>;
+		};
+
+		ps7-sdio@e0100000 {
+			clock-frequency = <0x7735940>;
+			compatible = "xlnx,ps7-sdio-1.00.a", "generic-sdhci";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x18 0x4>;
+			reg = <0xe0100000 0x1000>;
+			xlnx,has-cd = <0x1>;
+			xlnx,has-power = <0x0>;
+			xlnx,has-wp = <0x1>;
+			xlnx,sdio-clk-freq-hz = <0x3f93e10>;
+		};
+
+		ps7-slcr@f8000000 {
+			compatible = "xlnx,ps7-slcr-1.00.a", "xlnx,zynq-slcr";
+			reg = <0xf8000000 0x1000>;
+
+			clocks {
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+
+				armpll {
+					#clock-cells = <0x0>;
+					clock-output-names = "armpll";
+					clocks = <0x3>;
+					compatible = "xlnx,zynq-pll";
+					lockbit = <0x0>;
+					reg = <0x100 0x110 0x10c>;
+				};
+
+				ddrpll {
+					#clock-cells = <0x0>;
+					clock-output-names = "ddrpll";
+					clocks = <0x3>;
+					compatible = "xlnx,zynq-pll";
+					lockbit = <0x1>;
+					reg = <0x104 0x114 0x10c>;
+				};
+
+				iopll {
+					#clock-cells = <0x0>;
+					clock-output-names = "iopll";
+					clocks = <0x3>;
+					compatible = "xlnx,zynq-pll";
+					lockbit = <0x2>;
+					reg = <0x108 0x118 0x10c>;
+				};
+
+				ps_clk {
+					#clock-cells = <0x0>;
+					clock-frequency = <0x1fca055>;
+					clock-output-names = "ps_clk";
+					compatible = "fixed-clock";
+					linux,phandle = <0x3>;
+					phandle = <0x3>;
+				};
+			};
+		};
+
+		ps7-ttc@f8001000 {
+			compatible = "xlnx,ps7-ttc-1.00.a";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0xa 0x4 0x0 0xb 0x4 0x0 0xc 0x4>;
+			reg = <0xf8001000 0x1000>;
+		};
+
+		ps7-smcc@e000e000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,ps7-smcc-1.00.a", "xlnx,ps7-smc";
+			interrupt-parent = <0x1>;
+			interrupts = < 0 18 4 >;
+			ranges ;
+			reg = < 0xe000e000 0x1000 >;
+			xlnx,addr25 = <0x0>;
+			xlnx,nor-chip-sel0 = <0x0>;
+			xlnx,nor-chip-sel1 = <0x0>;
+			xlnx,sram-chip-sel0 = <0x0>;
+			xlnx,sram-chip-sel1 = <0x0>;
+			ps7-nand@e1000000 {
+				compatible = "xlnx,ps7-nand-1.00.a";
+				reg = < 0xe1000000 0x1000000 >;
+				xlnx,nand-clk-freq-hz = <0x5f5e100>;
+				xlnx,nand-width = <0x8>;
+				xlnx,nand-cycle-t0 = <0x4>;
+                                xlnx,nand-cycle-t1 = <0x4>;
+                                xlnx,nand-cycle-t2 = <0x1>;
+                                xlnx,nand-cycle-t3 = <0x2>;
+                                xlnx,nand-cycle-t4 = <0x2>;
+                                xlnx,nand-cycle-t5 = <0x2>;
+                                xlnx,nand-cycle-t6 = <0x4>;
+				#address-cells = <0x1>;
+                                #size-cells = <0x1>;
+				partition@0 {
+                                        label = "nand-main";
+                                        reg = <0x0 0x100000>;
+                                };
+			} ;
+		} ;
+
+		serial@e0000000 {
+			compatible = "xlnx,ps7-uart-1.00.a", "xlnx,xuartps";
+			current-speed = <0x1c200>;
+			device_type = "serial";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x1b 0x4>;
+			port-number = <0x0>;
+			reg = <0xe0000000 0x1000>;
+			xlnx,has-modem = <0x0>;
+			xlnx,uart-clk-freq-hz = <0x2faf080>;
+		};
+
+		ps7-usb@e0002000 {
+			compatible = "xlnx,ps7-usb-1.00.a";
+			dr_mode = "host";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x15 0x4>;
+			phy_type = "ulpi";
+			reg = <0xe0002000 0x1000>;
+			xlnx,usb-reset = <0xffffffff>;
+		};
+
+		ps7-xadc@f8007100 {
+			compatible = "xlnx,ps7-xadc-1.00.a";
+			interrupt-parent = <0x1>;
+			interrupts = <0x0 0x7 0x4>;
+			reg = <0xf8007100 0x20>;
+		};
+	};
+};

recipes-kernel/linux/linux-xlnx_3.8.bb

+# See include file for common information
+include linux-xlnx.inc
+
+# Kernel version and SRCREV correspond to: github.com/Xilinx v14.5 tag
+LINUX_VERSION = "3.8"
+SRCREV = "6a0bedad60e2bca8d9b50bf81b9895e29e31a6d7"
\ No newline at end of file