merged with framepars (trigger-related)

src/drivers/elphel/framepars.c

@@ -1462,7 +1462,7 @@ void trigSlaveUpdate(int sensor_port)  ///< sensor port number (0..3)
     while (common_pars->updated[sensor_port]) {
         dev_dbg(g_devfp_ptr,"port= %d,  thisFrameNumber[%d] = %d\n", sensor_port, sensor_port, (int) thisFrameNumber(sensor_port));
         common_pars->updated[sensor_port] = 0;
-        if (pars_to_update[nupdate  ].num != P_TRIG_PERIOD){ //???
+        if (pars_to_update[nupdate  ].num != P_TRIG_PERIOD){ // updated any other parameter - treat as period is updated (make sure it will not trigger)
             updated_period = FRAMEPAIR_FORCE_PROC;
         }
         pars_to_update[nupdate  ].num= P_TRIG_MASTER ;                  pars_to_update[nupdate++].val = common_pars->master_chn;

src/drivers/elphel/multi10359.c

@@ -1095,7 +1095,18 @@ int multisensor_pgm_detectsensor   (int sensor_port,               ///< sensor p
   x393_sensio_ctrl(sensio_ctl,sensor_port);
   camsync_mode.trig =     0;
   camsync_mode.trig_set = 1;
+
+// Maybe it should be set to triggered mode first
   x393_camsync_mode (camsync_mode);
+
+  // Trying with the sequencer
+//  X393_SEQ_SEND1 (sensor_port, frame16, x393_camsync_mode, camsync_mode);
+//  dev_dbg(g_dev_ptr,"{%d}  X3X3_SEQ_SEND1(0x%x,  0x%x, x393_camsync_mode,  0x%x)\n",
+//          sensor_port, sensor_port, frame16, (int) camsync_mode.d32);
+
+
+
+
   udelay (100);
 
   GLOBALPARS(sensor_port,G_SENS_AVAIL) |= 1<< (GLOBALPARS(sensor_port,G_SENS_AVAIL)); // temporary to indicate sensor detection functions that they need to initialize multisensor registers

src/drivers/elphel/param_depend.h

@@ -169,6 +169,8 @@ const unsigned long param_depend_tab[]=
      P_SENSOR_PHASE,          ONCHANGE_SENSORPHASE | ONCHANGE_EXPOSURE | ONCHANGE_LIMITFPS | \
                               ONCHANGE_MEMSENSOR | ONCHANGE_MEMCOMPRESSOR | ONCHANGE_COMPMODE | ONCHANGE_COMPSTOP | ONCHANGE_COMPRESTART ,
      P_FPGA_XTRA,             ONCHANGE_LIMITFPS ,
+
+//TODO NC393:  Check - maybe no-need to stop/restart the compressor when changing trigger modes?
      P_TRIG,                  ONCHANGE_RECALCSEQ | ONCHANGE_TRIGGERMODE | ONCHANGE_TRIGSEQ | ONCHANGE_LIMITFPS | /// Next to call with afterinit
                                    ONCHANGE_MULTISENS |
                                    ONCHANGE_WINDOW | ONCHANGE_EXPOSURE | ONCHANGE_HIST | ONCHANGE_AEXP | ONCHANGE_FOCUSMODE | ONCHANGE_LIMITFPS | ONCHANGE_HIST | \

src/drivers/elphel/pgm_functions.h

@@ -41,7 +41,7 @@ unsigned long sensor_to_camsync(unsigned long pixel_time, unsigned long sensor_c
 #define X393_SEQ_SEND1S(port,frame,func,data,subchn) {if ((frame) < 0) seqr_##func (0,       (data), (port), (subchn)); \
                                                       else             seqa_##func ((frame), (data), (port), (subchn)); }
 
-/** Tells if parameter is modifies
+/** Tells if parameter is modified
  * @param x parameter index to test
  * @return nonzero if modified */
 #define FRAMEPAR_MODIFIED(x) (thispars->mod[(x) >> 5] & (1<<((x) & 0x1f)))