Commit f01b77a7 authored by Oleg Dzhimiev's avatar Oleg Dzhimiev

correct ethernet record

parent aa35f9b5
......@@ -4,9 +4,9 @@
/ {
model = "Elphel 10393";
ps7_axi_interconnect_0: amba@0 {
ps7_i2c_0: ps7-i2c@e0004000 {
bus-id = <0>;
i2c-clk = <400000>;
......@@ -14,7 +14,7 @@
compatible = "stm,m41t62";
reg = <0x68>;
};
vsc330x@1 {
compatible = "vsc,vsc3304";
reg = <0x01>;
......@@ -71,7 +71,7 @@
si5338,out0_freq_int= <15000000>; /* 15Mhz to output 0 */
si5338,spread_spectrum_0= <1 500 31500>; /* Set spread spectrum for channel0 : enabled, 5%, 31.5KHz - high value, for testing */
};
ltc3589@34 {
compatible = "ltc,ltc3589";
reg = <0x34>;
......@@ -99,7 +99,7 @@
reg = <0x1a>;
};
};
ps7_ethernet_0: ps7-ethernet@e000b000 {
local-mac-address = [00 0e 64 10 00 00];
phy-handle = <&phy3>;
......@@ -108,13 +108,15 @@
#address-cells = <1>;
#size-cells = <0>;
phy3: phy@3 {
compatible = "atheros,8035";
/* Atheros 8035 */
compatible = "ethernet-phy-id004d.d072";
/* compatible = "ethernet-phy-ieee802.3-c22";*/
device_type = "ethernet-phy";
reg = <0x3>;
};
};
};
ps7_smcc_0: ps7-smcc@e000e000 {
ps7_nand_0: ps7-nand@e1000000 {
compatible = "arm,pl353-nand-r2p1";
......@@ -152,7 +154,7 @@
};
} ;
} ;
elphel_ahci: elphel-ahci@80000000 {
compatible = "elphel,elphel-ahci";
interrupt-parent = <&ps7_scugic_0>;
......@@ -162,7 +164,7 @@
fb_offs = <0xc00>;
};
};
elphel393_pwr: elphel393-pwr@0 {
compatible = "elphel,elphel393-pwr-1.00";
elphel393_pwr,simulate= <0>;
......@@ -185,17 +187,17 @@
elphel393_pwr,10389-init-value= <0x100>;
/* elphel393_pwr,channels_enable= "vcc_sens01 vp33sens01"; */
} ;
elphel393_mem: elphel393-mem@0 {
compatible = "elphel,elphel393-mem-1.00";
/*memsize = <25600>;*/
memsize = <76800>;
} ;
elphel393_init: elphel393-init {
compatible = "elphel,elphel393-init-1.00";
} ;
elphel393_circbuf: elphel393-circbuf@0 {
compatible = "elphel,elphel393-circbuf-1.00";
/* set this to "disable" to disable drivers */
......@@ -219,7 +221,7 @@
/* reg = <0x80000000 0x1000>; */
interrupt-names = "mult_saxi_0", "mult_saxi_1", "mult_saxi_2", "mult_saxi_3";
};
elphel393_videomem: elphel393-videomem@0 {
compatible = "elphel,elphel393-videomem-1.00";
/* set this to "disable" to disable drivers */
......@@ -233,7 +235,7 @@
frame_full_width = <8192>; /* in bytes, will be transformed to bursts (16 bytes). 1 memory page is 2048 bytes (128 bursts) */
frame_height = <8192>; /* in pixel lines */
frames_in_buffer = <2>; /* Each channel has this number of frames in buffer */
frame_start_chn0 = <0x00000000>; /* Channel 0 frame start (in bytes) */
frame_start_chn1 = <0x08000000>; /* Channel 1 frame start (in bytes) */
frame_start_chn2 = <0x10000000>; /* Channel 2 frame start (in bytes) */
......@@ -260,7 +262,7 @@
"mt9p006",
"mt9p006";
};
elphel393_sensor_i2c: elphel393-sensor-i2c@0 {
compatible = "elphel,elphel393-sensor-i2c-1.00";
/* Add known devices: name, slave address (7-bit), number of address bytes, number of data bytes, SCL frequency (kHz) */
......@@ -277,7 +279,7 @@
framepars_operations: elphel393-framepars@0 {
compatible = "elphel,elphel393-framepars-1.00";
};
histograms_operations: elphel393-histograms@0 {
compatible = "elphel,elphel393-histograms-1.00";
};
......@@ -291,14 +293,14 @@
};
elphel393_clock10359:elphel393-clock10359@0{
compatible = "elphel,elphel393_clock10359-1.00";
compatible = "elphel,elphel393_clock10359-1.00";
};
klogger_393: klogger-393@0 {
compatible = "elphel,klogger-393-1.00";
klogger-393,buffer_size = <1048576>;
klogger-393,buffer_size = <1048576>;
} ;
/* i2c driver for the extension boards, such as imu, gps, etc */
/* i2c driver for the extension boards, such as imu, gps, etc */
elphel393_ext_i2c:elphel393-ext-i2c@0{
compatible = "elphel,elphel393-ext-i2c-1.00";
time_scl_high = <3>; /* SCL high duration (us) */
......@@ -308,5 +310,5 @@
filter_sda = <7>; /* filter SDA read data by testing multiple times - currently just zero/non zero */
filter_scl = <7>; /* filter SCL read data by testing multiple times - currently just zero/non zero */
};
};
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment