Skip to content

L
linux-elphel
Commit b2b0813b authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

more debugging

parent b049b19c
Hide whitespace changes
Inline Side-by-side
Showing with 119 additions and 25 deletions
src/drivers/elphel/debug393.h
View file @ b2b0813b
......@@ -34,6 +34,9 @@
#define DBGB_PADD 11 ///< additional details
// x393_vidoemem.c
#define DBGB_VM 12 ///< vidoemem all debug
#define DBGB_SCRST 13 ///< vidoemem all debug
// 13
// 14
// 15
......@@ -58,6 +61,8 @@
#include "klogger_393.h"
#include "framepars.h" // for aglobals
#include "sensor_common.h"// for int getHardFrameNumber(int sensor_port, int use_compressor);
#ifndef ELPHEL_DEBUG393
#define ELPHEL_DEBUG393 1
#if ELPHEL_DEBUG393
......@@ -65,7 +70,8 @@
/// log unconditionally, for any channel
#define MDG(...) print_klog393(klog_mode, __FILE__, __FUNCTION__, __LINE__, __VA_ARGS__);
/// log only if specified bit in G_DEBUG global parameter for the specified sensor port is set
#define MDP(bit,port,fmt,...) { if (GLOBALPARS(port,G_DEBUG) & (1 << bit)) print_klog393(klog_mode, __FILE__, __FUNCTION__, __LINE__,"%d: "fmt,port,__VA_ARGS__); }
// #define MDP(bit,port,fmt,...) { if (GLOBALPARS(port,G_DEBUG) & (1 << bit)) print_klog393(klog_mode, __FILE__, __FUNCTION__, __LINE__,"%d: "fmt,port,__VA_ARGS__); }
#define MDP(bit,port,fmt,...) { if (GLOBALPARS(port,G_DEBUG) & (1 << bit)) print_klog393(klog_mode, __FILE__, __FUNCTION__, __LINE__,"%d:%d "fmt,port,getHardFrameNumber(port, 0),__VA_ARGS__); }
#else
#define MDF(x)
#define MDP(bit,port,fmt,...)
......
src/drivers/elphel/framepars.c
View file @ b2b0813b
......@@ -1019,6 +1019,9 @@ int setFrameParsAtomic(int sensor_port, ///< sensor port number (0
struct framepars_t *framepars = aframepars[sensor_port];
unsigned long *funcs2call =afuncs2call[sensor_port];
int findex_this, findex_prev, findex_future, frame16;
findex_this = thisFrameNumber(sensor_port) & PARS_FRAMES_MASK;
findex_prev = (findex_this - 1) & PARS_FRAMES_MASK;
findex_future = (findex_this - 2) & PARS_FRAMES_MASK; // actually - fartherst in the future??
MDP(DBGB_FSFA,sensor_port,"frameno=0x%lx, findex_this=%ld (0x%lx) maxLatency=%d, numPars=%d, frameParsInitialized[%d]=%d\n",
frameno, findex_this, thisFrameNumber(sensor_port), maxLatency, numPars, sensor_port, frameParsInitialized[sensor_port])
dev_dbg(g_devfp_ptr,"port= %d, frameno=0x%lx, findex_this=%d (0x%lx) maxLatency=%d, numPars=%d, frameParsInitialized[%d]=%d\n",
......@@ -1028,9 +1031,6 @@ int setFrameParsAtomic(int sensor_port, ///< sensor port number (0
if (!frameParsInitialized[sensor_port]) {
initSequencers(sensor_port); // Will call initFramePars(); and initialize functions
}
findex_this = thisFrameNumber(sensor_port) & PARS_FRAMES_MASK;
findex_prev = (findex_this - 1) & PARS_FRAMES_MASK;
findex_future = (findex_this - 2) & PARS_FRAMES_MASK; // actually - fartherst in the future??
LOCK_IBH(framepars_locks[sensor_port]);
PROFILE_NOW(5); // Was 6, but no 7 in NC393
if (maxLatency >= 0) {
......@@ -1054,7 +1054,9 @@ int setFrameParsAtomic(int sensor_port, ///< sensor port number (0
}
// not too late, not too early, go ahead (or maxlatency <0 - ASAP only)
for (npar = 0; npar < numPars; npar++) {
dev_dbg(g_devfp_ptr,"port= %d, --pars[%d].num=0x%lx, pars[%d].val=0x%lx", sensor_port, npar, pars[npar].num, npar, pars[npar].val);
dev_dbg(g_devfp_ptr,"port= %d, --pars[%d].num=0x%lx, pars[%d].val=0x%lx\n", sensor_port, npar, pars[npar].num, npar, pars[npar].val);
MDP(DBGB_FSFA,sensor_port," --pars[%d].num=0x%lx, pars[%d].val=0x%lx\n", npar, pars[npar].num, npar, pars[npar].val)
// frame16= (pars[npar].num & FRAMEPAR_GLOBALS)? -1: (frameno & PARS_FRAMES_MASK);
frame16 = frameno & PARS_FRAMES_MASK;
val = pars[npar].val;
......@@ -1081,6 +1083,8 @@ int setFrameParsAtomic(int sensor_port, ///< sensor port number (0
}
//TODO: optimize to use mask several parameters together
dev_dbg(g_devfp_ptr,"port= %d, frame16=0x%x\n", sensor_port, frame16);
MDP(DBGB_FSFA,sensor_port,"framepars[%d].pars[%d]=0x%lx =?= val = 0x%lx, pars[%d].num=0x%08lx & 0x%08x\n",
frame16, index, framepars[frame16].pars[index], val, npar, pars[npar].num, FRAMEPAIR_FORCE_NEW)
if ((framepars[frame16].pars[index] != val) || (pars[npar].num & FRAMEPAIR_FORCE_NEW)) {
bmask = 1 << (index & 31);
bindex = index >> 5;
......@@ -1090,15 +1094,24 @@ int setFrameParsAtomic(int sensor_port, ///< sensor port number (0
framepars[frame16].mod[bindex] |= bmask;
framepars[frame16].mod32 |= bmask32;
framepars[frame16].functions |= funcs2call[index]; //Mark which functions will be needed to process the parameters
dev_dbg(g_devfp_ptr,"port= %d, bindex=0x%x, bmask=0x%08lx, bmask32=0x%08lx, functions=0x%08lx\n", sensor_port, bindex, bmask, bmask32, framepars[frame16].functions);
dev_dbg(g_devfp_ptr,"port= %d, bindex=0x%x, bmask=0x%08lx, bmask32=0x%08lx, functions=0x%08lx\n",
sensor_port, bindex, bmask, bmask32, framepars[frame16].functions);
MDP(DBGB_FSFA,sensor_port,"bindex=0x%x, bmask=0x%08lx, bmask32=0x%08lx, functions=0x%08lx\n",
bindex, bmask, bmask32, framepars[frame16].functions)
// Write parameter to the next frames up to the one that have the same parameter already modified (only if not FRAMEPAIR_JUST_THIS)
if ((pars[npar].num & FRAMEPAIR_JUST_THIS) == 0) {
dev_dbg(g_devfp_ptr,"port= %d, --- setting next frames\n",sensor_port);
dev_dbg(g_devfp_ptr,"port= %d, --- setting next frames, pars[%d].num=0x%lx\n",sensor_port,npar,pars[npar].num);
MDP(DBGB_FSFA,sensor_port," --- setting next frames, pars[%d].num=0x%lx\n",npar,pars[npar].num)
for (nframe = (frame16 + 1) & PARS_FRAMES_MASK; (nframe != findex_prev) && (!(framepars[nframe].mod[bindex] & bmask)); nframe = (nframe + 1) & PARS_FRAMES_MASK) {
framepars[nframe].pars[index] = val;
dev_dbg(g_devfp_ptr,"port= %d, %d", sensor_port, nframe);
dev_dbg(g_devfp_ptr,"framepars[%d].pars[%d] <- 0x%08x ", nframe, index, val);
MDP(DBGB_FSFA,sensor_port,"framepars[%d].pars[%d] <- 0x%08x ", nframe, index, val)
}
frame16 = (frame16 - 1) & PARS_FRAMES_MASK; // for " regular parameters "modified since" do not include the target frame itself, for "JUST_THIS" - does
dev_dbg(g_devfp_ptr,"\n");
MDP(DBGB_FSFA,sensor_port,"%s\n","")
// D5(printk("\n"));
}
// Mark this parameter in all previous frames as "modified since"
......@@ -1106,7 +1119,10 @@ int setFrameParsAtomic(int sensor_port, ///< sensor port number (0
for (nframe = frame16; nframe != findex_future; nframe = (nframe - 1) & PARS_FRAMES_MASK) { //NOTE: frame16 is modified here
framepars[nframe].modsince[bindex] |= bmask;
framepars[nframe].modsince32 |= bmask32;
MDP(DBGB_FSFA,sensor_port,"framepars[%d].modsince[%d] |= 0x%08x, framepars[%d].modsince32 |= 0x%08x ",
nframe, bindex, bmask, nframe, bmask32)
}
MDP(DBGB_FSFA,sensor_port,"%s\n","")
}
} else { // error - trying to write "just this" to the "future" - that would stick if allowed
UNLOCK_IBH(framepars_locks[sensor_port]);
......
src/drivers/elphel/pgm_functions.c
View file @ b2b0813b
......@@ -1473,10 +1473,12 @@ int pgm_sensorrun (int sensor_port, ///< sensor port number (0..3
dev_dbg(g_dev_ptr,"{%d} frame16=%d\n",sensor_port,frame16);
MDP(DBGB_PSFN, sensor_port,"frame16=%d\n",frame16)
if (frame16 >= PARS_FRAMES) return -EINVAL; // wrong frame
control_sensor_memory (sensor_port,
thispars->pars[P_SENSOR_RUN] & 3,
(frame16<0)? ASAP: ABSOLUTE, // how to apply commands - directly or through channel sequencer
frame16);
if (thispars->pars[P_SENSOR_RUN] & 3) {
control_sensor_memory (sensor_port,
thispars->pars[P_SENSOR_RUN] & 3,
(frame16<0)? ASAP: ABSOLUTE, // how to apply commands - directly or through channel sequencer
frame16);
}
// Is it OK to process stop here too?
return 0;
/*
......@@ -1522,10 +1524,12 @@ int pgm_sensorstop (int sensor_port, ///< sensor port number (0..3
MDP(DBGB_PSFN, sensor_port,"frame16=%d\n",frame16)
if (frame16 >= PARS_FRAMES) return -EINVAL; // wrong frame
// Do we need to filter for stop only ( if ((thispars->pars[P_SENSOR_RUN] & 3)==0){... ) ?
control_sensor_memory (sensor_port,
thispars->pars[P_SENSOR_RUN] & 3,
(frame16<0)? ASAP: ABSOLUTE, // how to apply commands - directly or through channel sequencer
frame16);
if ((thispars->pars[P_SENSOR_RUN] & 3)==0){
control_sensor_memory (sensor_port,
thispars->pars[P_SENSOR_RUN] & 3,
(frame16<0)? ASAP: ABSOLUTE, // how to apply commands - directly or through channel sequencer
frame16);
}
return 0;
#else
int fpga_data=0;
......@@ -1900,15 +1904,22 @@ int pgm_memcompressor (int sensor_port, ///< sensor port number (
#ifndef NC353
int width_marg, height_marg;
int overlap = 0; // tile overlap (total - 2 for JPEG18, 4 - for JPEG20, 0 otherwise
int width_bursts;
int cmprs_top = 0; // 1 for JPEG18 only, 0 for others
int width_bursts; // width in 16-pixel bursts
int cmprs_top = 0; // 1 for JPEG18 only, 0 for others (also is used for compressor left)
int tile_width; // in bursts, 2 for those with overlap (height>16), 4 with heigh==16
int tile_height; // 16/18 (20 not yet implemented)
x393_cmprs_frame_format_t cmprs_frame_format ={.d32=0};
dev_dbg(g_dev_ptr,"{%d} frame16=%d\n",sensor_port,frame16);
MDP(DBGB_PSFN, sensor_port,"frame16=%d\n",frame16)
if (frame16 >= PARS_FRAMES) return -1; // wrong frame
width_marg = thispars->pars[P_ACTUAL_WIDTH];
height_marg = thispars->pars[P_ACTUAL_WIDTH];
// NC393: maybe add later monochrome mode with small tiles?
cmprs_frame_format.num_macro_cols_m1 = (width_marg>> 4) - 1; // before adding margins
cmprs_frame_format.num_macro_rows_m1 = (height_marg>> 4) - 1; // before adding margins;
switch(thispars->pars[P_COLOR]){
case COLORMODE_COLOR:
overlap = 2;
......@@ -1927,6 +1938,8 @@ int pgm_memcompressor (int sensor_port, ///< sensor port number (
} else {
tile_width = 4;
}
cmprs_frame_format.left_margin = cmprs_top; // same as top - only for 18x18 tiles to keep Bayer shift (0/1)
width_bursts = (width_marg >> 4) + ((width_marg & 0xf) ? 1 : 0);
// Adjusting for tile width. TODO: probably not needed, handled in FPGA - verify (and remove 2 next lines)
if (width_bursts & 1) width_bursts++;
......@@ -1944,6 +1957,7 @@ int pgm_memcompressor (int sensor_port, ///< sensor port number (
(frame16<0)? ASAP: ABSOLUTE, // how to apply commands - directly or through channel sequencer
frame16); // Frame number the command should be applied to (if not immediate mode)
X393_SEQ_SEND1 (sensor_port, frame16, x393_cmprs_format, cmprs_frame_format);
return 0;
// TODO: Do we need to maintain P_IMGSZMEM ?
// #define P_PAGE_ACQ 18 ///< Number of image page buffer to acquire to (0.1?)
......@@ -2541,7 +2555,11 @@ int pgm_comprestart(int sensor_port, ///< sensor port number (0..3
MDP(DBGB_PSFN, sensor_port,"frame16=%d\n",frame16)
if (frame16 >= PARS_FRAMES) return -1; // wrong frame
// does it need to be be started (nothing do be done to stop)
if (thispars->pars[P_COMPRESSOR_RUN]==0) return 0; // does not need compressor to be started
if (thispars->pars[P_COMPRESSOR_RUN]==0) {
MDP(DBGB_PADD, sensor_port,"thispars->pars[P_COMPRESSOR_RUN] = %d, does not need compressor to be started\n",
(int)thispars->pars[P_COMPRESSOR_RUN])
return 0; // does not need compressor to be started
}
// NC393: memory controller already set by pgm_memcompressor, but we'll need to setup dependent/from memory here
switch(thispars->pars[P_COLOR]){
case COLORMODE_COLOR:
......@@ -2690,7 +2708,7 @@ int pgm_compctl (int sensor_port, ///< sensor port number (0..3
extra_pages = 0;
}
control_compressor_memory (sensor_port,
thispars->pars[P_SENSOR_RUN] & 3, // stop/single/run(/reset)
thispars->pars[P_COMPRESSOR_RUN] & 3, // stop/single/run(/reset)
extra_pages,
disable_need,
(frame16<0)? ASAP: ABSOLUTE, // how to apply commands - directly or through channel sequencer
......@@ -2702,12 +2720,13 @@ int pgm_compctl (int sensor_port, ///< sensor port number (0..3
break;
case COMPRESSOR_RUN_SINGLE:
case COMPRESSOR_RUN_CONT:
cmprs_mode.run = ((thispars->pars[P_SENSOR_RUN] & 3)==SENSOR_RUN_CONT)? X393_CMPRS_CBIT_RUN_ENABLE : X393_CMPRS_CBIT_RUN_STANDALONE;
cmprs_mode.run = ((thispars->pars[P_COMPRESSOR_RUN] & 3)==COMPRESSOR_RUN_CONT)? X393_CMPRS_CBIT_RUN_ENABLE : X393_CMPRS_CBIT_RUN_STANDALONE;
break;
}
cmprs_mode.run_set = 1;
X393_SEQ_SEND1 (sensor_port, frame16, x393_cmprs_control_reg, cmprs_mode);
dev_dbg(g_dev_ptr,"{%d} X393_SEQ_SEND1(0x%x, 0x%x, x393_cmprs_control_reg, 0x%x)\n",sensor_port, sensor_port, frame16, cmprs_mode.d32);
MDP(DBGB_PADD, sensor_port,"X393_SEQ_SEND1(0x%x, 0x%x, x393_cmprs_control_reg, 0x%x)\n", sensor_port, frame16, cmprs_mode.d32)
return 0;
#else
......
src/drivers/elphel/sensor_common.c
View file @ b2b0813b
......@@ -52,6 +52,9 @@
#include <asm/delay.h> // just for usleep1000()
// NC393 debug macros
#include "debug393.h"
/* Driver name to display in log messages.*/
//#define IMAGEACQ_DRIVER_DESCRIPTION "Elphel (R) Model 393 Image Acquisition device driver"
......@@ -956,7 +959,7 @@ int sequencer_stop_run_reset(int chn, ///< Sensor port
{
x393_cmdframeseq_mode_t cmdframeseq_mode = {.d32 = 0};
x393_status_ctrl_t status_ctrl = {.d32=0};
MDP(DBGB_SCRST,chn,"cmd = %d\n",cmd)
switch (cmd){
case SEQ_CMD_STOP:
cmdframeseq_mode.run_cmd = 2;
......@@ -974,6 +977,9 @@ int sequencer_stop_run_reset(int chn, ///< Sensor port
udelay(1);
if (status_ctrl.mode)
set_x393_cmdseqmux_status_ctrl(status_ctrl);
// debug
udelay(1);
MDP(DBGB_SCRST,chn,"status_ctrl.d32 = 0x%x\n",status_ctrl.d32)
return 0;
}
......
src/drivers/elphel/x393_fpga_functions.c
View file @ b2b0813b
......@@ -37,6 +37,51 @@ int init_command_sequencer(int sensor_port)
return 0;
}
#endif
int compressor_dma_setup (int port_afi, ///< number of AFI port (0 - afi 1, 1 - afi2) (currently only 0 is routed)
int chn_mask, ///< compressor channels to use, bitmask
int status_mode, ///< status update mode status mode (3 for auto)
int report_mode, ///< readback mode:
///< * 0 - show EOF pointer, internal
///< * 1 - show EOF pointer, confirmed written to the system memory
///< * 2 - show show current pointer, internal (debug mode)
///< * 3 - show current pointer, confirmed written to the system memory (debug mode)
u32 cmprs0_sa, ///< input channel 0 start address, 32-bytes aligned
u32 cmprs0_len, ///< input channel 0 buffer length, 32-byte aligned
u32 cmprs1_sa, ///< input channel 1 start address, 32-bytes aligned
u32 cmprs1_len, ///< input channel 1 buffer length, 32-byte aligned
u32 cmprs2_sa, ///< input channel 2 start address, 32-bytes aligned
u32 cmprs2_len, ///< input channel 2 buffer length, 32-byte aligned
u32 cmprs3_sa, ///< input channel 3 start address, 32-bytes aligned
u32 cmprs3_len) ///< input channel 3 buffer length, 32-byte aligned
{
if ((cmprs0_sa | cmprs0_len | cmprs1_sa | cmprs1_len | cmprs2_sa | cmprs2_len | cmprs3_sa | cmprs3_len) & 0x1f){
return -EINVAL;
}
return 0;
}
/*
Set mode of selected input channel of the selected AFI multiplexer
@param port_afi - number of AFI port (0 - afi 1, 1 - afi2)
@param chn - number of afi input channel to program
@param status_mode - status mode (3 for auto)
@param report_mode - readback mode:
mode == 0 - show EOF pointer, internal
mode == 1 - show EOF pointer, confirmed written to the system memory
mode == 2 - show current pointer, internal
mode == 3 - show current pointer, confirmed written to the system memory
@param afi_cmprs0_sa - input channel 0 start address in 32-byte chunks
@param afi_cmprs0_len - input channel 0 buffer length in 32-byte chunks
@param afi_cmprs1_sa - input channel 0 start address in 32-byte chunks
@param afi_cmprs1_len - input channel 0 buffer length in 32-byte chunks
@param afi_cmprs2_sa - input channel 0 start address in 32-byte chunks
@param afi_cmprs2_len - input channel 0 buffer length in 32-byte chunks
@param afi_cmprs3_sa - input channel 0 start address in 32-byte chunks
@param afi_cmprs3_len - input channel 0 buffer length in 32-byte chunks
@param verbose - verbose level
*/
/** Read time (seconds and microseconds) from the FPGA RTC */
sec_usec_t * get_fpga_rtc(sec_usec_t * ts) ///< Pointer to a sec/usec structure to fill in
///< @return structure link to a passed structure
......
src/drivers/elphel/x393_videomem.c
View file @ b2b0813b
......@@ -187,6 +187,7 @@ int control_sensor_memory (int num_sensor, ///< sensor port number (0..3)
}
if (mcntrl_mode.enable){
memchan_enable(num_sensor + VIDEOMEM_SENSOR_CHANNEL0, 1); // just enable - nothing will change if it was already enabled. Never disabled
MDP(DBGB_VM,num_sensor,"memchan_enable(%d,1)\n",num_sensor + VIDEOMEM_SENSOR_CHANNEL0)
}
return 0;
}
......@@ -305,14 +306,14 @@ int control_compressor_memory (int num_sensor, ///< sensor port number (0.
mcntrl_mode.disable_need = disable_need; // non-constant parameter
mcntrl_mode.extra_pages = extra_pages; // non-constant parameter
switch (cmd){
case SENSOR_RUN_STOP:
case COMPRESSOR_RUN_STOP:
mcntrl_mode.enable = 0;
break;
case SENSOR_RUN_SINGLE:
case COMPRESSOR_RUN_SINGLE:
mcntrl_mode.single = 1;
mcntrl_mode.repetitive = 0;
break;
case SENSOR_RUN_CONT:
case COMPRESSOR_RUN_CONT:
break;
case SENSOR_RUN_RESET:
mcntrl_mode.chn_nreset = 0;
......@@ -348,6 +349,7 @@ int control_compressor_memory (int num_sensor, ///< sensor port number (0.
}
if (mcntrl_mode.enable){
memchan_enable(num_sensor + VIDEOMEM_COMPRESSOR_CHANNEL0, 1); // just enable - nothing will change if it was already enabled. Never disabled
MDP(DBGB_VM,num_sensor,"memchan_enable(%d,1)\n",num_sensor + VIDEOMEM_COMPRESSOR_CHANNEL0)
}
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment