+AHCI_ELPHEL

src/drivers/ata/Kconfig

+# SPDX-License-Identifier: GPL-2.0
 #
 # SATA/PATA driver configuration
 #
@@ -14,7 +15,6 @@ menuconfig ATA
 	tristate "Serial ATA and Parallel ATA drivers (libata)"
 	depends on HAS_IOMEM
 	depends on BLOCK
-	depends on !(M32R || M68K || S390) || BROKEN
 	select SCSI
 	select GLOB
 	---help---
@@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR
 
 config ATA_ACPI
 	bool "ATA ACPI Support"
-	depends on ACPI && PCI
+	depends on ACPI
 	default y
 	help
 	  This option adds support for ATA-related ACPI objects.
@@ -80,6 +80,8 @@ config SATA_PMP
 	  This option adds support for SATA Port Multipliers
 	  (the SATA version of an ethernet hub, or SAS expander).
 
+if HAS_DMA
+
 comment "Controllers with non-SFF native interface"
 
 config SATA_AHCI
@@ -98,6 +100,15 @@ config SATA_AHCI_PLATFORM
 
 	  If unsure, say N.
 
+config AHCI_BRCM
+	tristate "Broadcom AHCI SATA support"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
+	help
+	  This option enables support for the AHCI SATA3 controller found on
+	  Broadcom SoC's.
+
+	  If unsure, say N.
+
 config AHCI_DA850
 	tristate "DaVinci DA850 AHCI SATA support"
 	depends on ARCH_DAVINCI_DA850
@@ -107,6 +118,15 @@ config AHCI_DA850
 
 	  If unsure, say N.
 
+config AHCI_DM816
+	tristate "DaVinci DM816 AHCI SATA support"
+	depends on ARCH_OMAP2PLUS
+	help
+	  This option enables support for the DaVinci DM816 SoC's
+	  onboard AHCI SATA controller.
+
+	  If unsure, say N.
+
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
@@ -118,6 +138,7 @@ config AHCI_ST
 config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
 	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
+	depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -125,11 +146,21 @@ config AHCI_IMX
 	  If unsure, say N.
 
 config AHCI_CEVA
-	tristate "Ceva AHCI SATA support"
+	tristate "CEVA AHCI SATA support"
 	depends on OF
 	help
-	  This option enables support for the Xilinx Zynq
-	  UltraScale+ MPSoC's onboard Ceva AHCI SATA.
+	  This option enables support for the CEVA AHCI SATA.
+	  It can be found on the Xilinx Zynq UltraScale+ MPSoC.
+
+	  If unsure, say N.
+
+config AHCI_MTK
+	tristate "MediaTek AHCI SATA support"
+	depends on ARCH_MEDIATEK
+	select MFD_SYSCON
+	help
+	  This option enables support for the MediaTek SoC's
+	  onboard AHCI SATA controller.
 
 	  If unsure, say N.
 
@@ -142,6 +173,15 @@ config AHCI_MVEBU
 
 	  If unsure, say N.
 
+config AHCI_OCTEON
+	tristate "Cavium Octeon Soc Serial ATA"
+	depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
+	default y
+	help
+	  This option enables support for Cavium Octeon SoC Serial ATA.
+
+	  If unsure, say N.
+
 config AHCI_SUNXI
 	tristate "Allwinner sunxi AHCI SATA support"
 	depends on ARCH_SUNXI
@@ -170,9 +210,13 @@ config AHCI_ELPHEL
 	tristate "Elphel AHCI SATA driver support for elphel393 camera series"
 	depends on ARM
 	default m if ARM
+
+config AHCI_QORIQ
+	tristate "Freescale QorIQ AHCI SATA support"
+	depends on OF
 	help
-	  This option enables support for Elphel AHCI SATA controller in elphel393
-	  series cameras.
+	  This option enables support for the Freescale QorIQ AHCI SoC's
+	  onboard AHCI SATA.
 
 	  If unsure, say N.
 
@@ -185,6 +229,24 @@ config SATA_FSL
 
 	  If unsure, say N.
 
+config SATA_GEMINI
+	tristate "Gemini SATA bridge support"
+	depends on ARCH_GEMINI || COMPILE_TEST
+	default ARCH_GEMINI
+	help
+	  This enabled support for the FTIDE010 to SATA bridge
+	  found in Cortina Systems Gemini platform.
+
+	  If unsure, say N.
+
+config SATA_AHCI_SEATTLE
+	tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
+	depends on ARCH_SEATTLE
+	help
+	 This option enables support for AMD Seattle SATA host controller.
+
+	 If unsure, say N
+
 config SATA_INIC162X
 	tristate "Initio 162x SATA support (Very Experimental)"
 	depends on PCI
@@ -207,6 +269,8 @@ config SATA_SIL24
 
 	  If unsure, say N.
 
+endif # HAS_DMA
+
 config ATA_SFF
 	bool "ATA SFF support (for legacy IDE and PATA)"
 	default y
@@ -264,6 +328,7 @@ config SATA_SX4
 
 config ATA_BMDMA
 	bool "ATA BMDMA support"
+	depends on HAS_DMA
 	default y
 	help
 	  This option adds support for SFF ATA controllers with BMDMA
@@ -288,13 +353,23 @@ config ATA_PIIX
 
 config SATA_DWC
 	tristate "DesignWare Cores SATA support"
-	depends on 460EX
+	depends on DMADEVICES
+	select GENERIC_PHY
 	help
 	  This option enables support for the on-chip SATA controller of the
 	  AppliedMicro processor 460EX.
 
 	  If unsure, say N.
 
+config SATA_DWC_OLD_DMA
+	bool "Support old device trees"
+	depends on SATA_DWC
+	select DW_DMAC_CORE
+	default y if 460EX
+	help
+	  This option enables support for old device trees without the
+	  "dmas" property.
+
 config SATA_DWC_DEBUG
 	bool "Debugging driver version"
 	depends on SATA_DWC
@@ -309,6 +384,7 @@ config SATA_DWC_VDEBUG
 
 config SATA_HIGHBANK
 	tristate "Calxeda Highbank SATA support"
+	depends on HAS_DMA
 	depends on ARCH_HIGHBANK || COMPILE_TEST
 	help
 	  This option enables support for the Calxeda Highbank SoC's
@@ -318,6 +394,7 @@ config SATA_HIGHBANK
 
 config SATA_MV
 	tristate "Marvell SATA support"
+	depends on HAS_DMA
 	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 	select GENERIC_PHY
@@ -346,7 +423,7 @@ config SATA_PROMISE
 
 config SATA_RCAR
 	tristate "Renesas R-Car SATA support"
-	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
 	help
 	  This option enables support for Renesas R-Car Serial ATA.
 
@@ -467,6 +544,15 @@ config PATA_BF54X
 
 	  If unsure, say N.
 
+config PATA_BK3710
+	tristate "Palmchip BK3710 PATA support"
+	depends on ARCH_DAVINCI
+	help
+	  This option enables support for the integrated IDE controller on
+	  the TI DaVinci SoC.
+
+	  If unsure, say N.
+
 config PATA_CMD64X
 	tristate "CMD64x PATA support"
 	depends on PCI
@@ -539,6 +625,17 @@ config PATA_EP93XX
 
 	  If unsure, say N.
 
+config PATA_FTIDE010
+	tristate "Faraday Technology FTIDE010 PATA support"
+	depends on OF
+	depends on ARM
+	depends on SATA_GEMINI
+	help
+	  This option enables support for the Faraday FTIDE010
+	  PATA controller found in the Cortina Gemini SoCs.
+
+	  If unsure, say N.
+
 config PATA_HPT366
 	tristate "HPT 366/368 PATA support"
 	depends on PCI
@@ -748,15 +845,6 @@ config PATA_SC1200
 
 	  If unsure, say N.
 
-config PATA_SCC
-	tristate "Toshiba's Cell Reference Set IDE support"
-	depends on PCI && PPC_CELLEB
-	help
-	  This option enables support for the built-in IDE controller on
-	  Toshiba Cell Reference Board.
-
-	  If unsure, say N.
-
 config PATA_SCH
 	tristate "Intel SCH PATA support"
 	depends on PCI
@@ -851,15 +939,6 @@ config PATA_AT32
 
 	  If unsure, say N.
 
-config PATA_AT91
-	tristate "PATA support for AT91SAM9260"
-	depends on ARM && SOC_AT91SAM9
-	depends on !ARCH_MULTIPLATFORM
-	help
-	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
-
-	  If unsure, say N.
-
 config PATA_CMD640_PCI
 	tristate "CMD640 PCI PATA support (Experimental)"
 	depends on PCI
@@ -870,6 +949,15 @@ config PATA_CMD640_PCI
 
 	  If unsure, say N.
 
+config PATA_FALCON
+	tristate "Atari Falcon PATA support"
+	depends on M68K && ATARI
+	help
+	  This option enables support for the on-board IDE
+	  interface on the Atari Falcon.
+
+	  If unsure, say N.
+
 config PATA_ISAPNP
 	tristate "ISA Plug and Play PATA support"
 	depends on ISAPNP