Skip to content

L
linux-elphel
Commit 87b9b1b0 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

Merge branch 'rocko' of git@git.elphel.com:Elphel/linux-elphel.git into rocko

parents a9ba974c f7668d15
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 237 additions and 76 deletions
src/drivers/elphel/mt9f002.c
View file @ 87b9b1b0
This diff is collapsed.
src/drivers/elphel/mt9f002.h
View file @ 87b9b1b0
......@@ -23,7 +23,7 @@
// bit 9 should have set masking for broken frames
// cleared bit 3 allows writing to some RO registers
//#define MT9F002_RESET_REGISTER_VALUE 0x001c
#define MT9F002_RESET_REGISTER_VALUE 0x0011c
#define MT9F002_RESET_REGISTER_VALUE 0x011c
//#define MT9F002_RESET_REGISTER_VALUE 0x0014
// number of lines to sacrifice before generating Frame Valid
#define MT9F002_VACT_DELAY 2
......
src/drivers/elphel/pgm_functions.c
View file @ 87b9b1b0
......@@ -518,8 +518,6 @@ int pgm_detectsensor (int sensor_port, ///< sensor port number (
setFramePar(sensor_port, thispars, P_CLK_SENSOR, 48000000);
}
if (thispars->pars[P_SENSOR] == SENSOR_DETECT) {
sensor->sensorType=SENSOR_NONE; // to prevent from initializing again
dev_dbg(g_dev_ptr,"No image sensor found\n");
......
src/drivers/elphel/x393_videomem.c
View file @ 87b9b1b0
......@@ -88,7 +88,7 @@ static struct class *videomem_dev_class;
// About frame full width:
// https://blog.elphel.com/2015/05/nc393-development-progress-multichannel-memory-controller-for-the-multi-sensor-camera/#Memory_mapping_and_access_types
static struct elphel_video_buf_t buffer_settings = { ///< some default settings, same as in DT
.frame_start = {0x00000000, 0x08000000, 0x10000000, 0x08000000}, /* Frame starts (in bytes) */
.frame_start = {0x00000000, 0x08000000, 0x10000000, 0x18000000}, /* Frame starts (in bytes) */
.frame_full_width = { 8192, 8192, 8192, 8192}, /* Frame full widths (in bytes). 1 memory page is 2048 bytes (128 bursts) */
.frame_height = { 8192, 8192, 8192, 8192}, /* Channel 3 maximal frame height in pixel lines */
.frames_in_buffer = { 2, 2, 2, 2} /* Number of frames in channel 3 buffer */
......@@ -446,15 +446,15 @@ int control_sensor_memory (int num_sensor, ///< sensor port number (0..3)
}
dev_dbg(g_dev_ptr,"{%d} frame16=%d, cmd=%d, x393cms=%d\n",num_sensor,frame16, cmd, (int) x393cmd);
dev_dbg(g_dev_ptr,"mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, reset_frame=%d, single=%d,repetitive=%d, disable_need=%d,skip_too_late=%d )\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem, mcntrl_mode.extra_pages,
mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.reset_frame, mcntrl_mode.single, mcntrl_mode.repetitive,
mcntrl_mode.disable_need, mcntrl_mode.skip_too_late);
dev_dbg(g_dev_ptr,"control_sensor_memory mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, reset_frame=%d, single=%d,repetitive=%d, disable_need=%d,skip_too_late=%d )\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem,
mcntrl_mode.extra_pages, mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.reset_frame,
mcntrl_mode.single, mcntrl_mode.repetitive, mcntrl_mode.disable_need, mcntrl_mode.skip_too_late);
MDP(DBGB_VM,num_sensor,"frame16=%d, cmd=%d, x393cms=%d\n",frame16, cmd, (int) x393cmd)
MDP(DBGB_VM,num_sensor,"mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, reset_frame=%d, single=%d,repetitive=%d, disable_need=%d,skip_too_late=%d )\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem, mcntrl_mode.extra_pages,
mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.reset_frame, mcntrl_mode.single, mcntrl_mode.repetitive,
mcntrl_mode.disable_need, mcntrl_mode.skip_too_late)
MDP(DBGB_VM,num_sensor,"control_sensor_memory mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, reset_frame=%d, single=%d,repetitive=%d, disable_need=%d,skip_too_late=%d )\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem,
mcntrl_mode.extra_pages, mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.reset_frame,
mcntrl_mode.single, mcntrl_mode.repetitive,mcntrl_mode.disable_need, mcntrl_mode.skip_too_late)
switch (x393cmd){
......@@ -585,7 +585,7 @@ int control_compressor_memory (int num_sensor, ///< sensor port number (0.
.extra_pages = 1, // [ 4: 3] (0) 2-bit number of extra pages that need to stay (not to be overwritten) in the buffer
.keep_open = 0, // [ 5] (0) (NA in linescan) for 8 or less rows - do not close page between accesses (not used in scanline mode)
.byte32 = 1, // [ 6] (1) (NA in linescan) 32-byte columns (0 - 16-byte), not used in scanline mode
.linear = linear, // [ 7] (1) Use linear mode instead of tiled (for raw image files): extra_pages=0, keep_open=x, byte32=x
.linear = linear, // [ 7] (1) Use linear mode instead of tiled (for raw image files): extra_pages=0, keep_open=x, byte32=x
.reset_frame = 1, // [ 8] (0) reset frame number
.single = 0, // [ 9] (0) run single frame
.repetitive = 1, // [ 10] (1) run repetitive frames
......@@ -614,15 +614,17 @@ int control_compressor_memory (int num_sensor, ///< sensor port number (0.
return -EINVAL;
}
dev_dbg(g_dev_ptr,"{%d} frame16=%d, cmd=%d, x393cms=%d\n",num_sensor,frame16, cmd, (int) x393cmd);
dev_dbg(g_dev_ptr,"mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, reset_frame=%d, single=%d,repetitive=%d, disable_need=%d,skip_too_late=%d )\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem, mcntrl_mode.extra_pages,
mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.reset_frame, mcntrl_mode.single, mcntrl_mode.repetitive,
mcntrl_mode.disable_need, mcntrl_mode.skip_too_late);
dev_dbg(g_dev_ptr,"control_compressor_memory mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, linear=%d, reset_frame=%d, single=%d, repetitive=%d, disable_need=%d, skip_too_late=%d, copy_frame=%d, abort_late=%d)\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem,
mcntrl_mode.extra_pages, mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.linear,
mcntrl_mode.reset_frame, mcntrl_mode.single, mcntrl_mode.repetitive, mcntrl_mode.disable_need,
mcntrl_mode.skip_too_late, mcntrl_mode.copy_frame, mcntrl_mode.abort_late);
MDP(DBGB_VM,num_sensor,"frame16=%d, cmd=%d, x393cms=%d\n",frame16, cmd, (int) x393cmd)
MDP(DBGB_VM,num_sensor,"mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, reset_frame=%d, single=%d,repetitive=%d, disable_need=%d,skip_too_late=%d )\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem, mcntrl_mode.extra_pages,
mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.reset_frame, mcntrl_mode.single, mcntrl_mode.repetitive,
mcntrl_mode.disable_need, mcntrl_mode.skip_too_late)
MDP(DBGB_VM,num_sensor,"control_compressor_memory mode=0x%x (enable=%d, chn_nreset=%d, write_mem=%d, extra_pages=%d, keep_open=%d, byte32=%d, linear=%d, reset_frame=%d, single=%d, repetitive=%d, disable_need=%d, skip_too_late=%d, copy_frame=%d, abort_late=%d)\n",
mcntrl_mode.d32, mcntrl_mode.enable, mcntrl_mode.chn_nreset, mcntrl_mode.write_mem,
mcntrl_mode.extra_pages, mcntrl_mode.keep_open, mcntrl_mode.byte32, mcntrl_mode.linear,
mcntrl_mode.reset_frame, mcntrl_mode.single, mcntrl_mode.repetitive, mcntrl_mode.disable_need,
mcntrl_mode.skip_too_late, mcntrl_mode.copy_frame, mcntrl_mode.abort_late)
switch (x393cmd){
case ASAP:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment