* lseek (SEEK_END, LSEEK_HIST_REQ_EN) - (default)enable histogram request when reading histogram (safer, but may be not desirable in HDR mode) - default after opening
* lseek (SEEK_END, LSEEK_HIST_REQ_DIS) - disable histogram request when reading histogram - will read latest available relying it is available
* <li> lseek <b>(SEEK_CUR, value)</b> - ignore value, return frame_index (may be negative if error)
* <li> lseek <b>(SEEK_END, value < 0)</b> - do nothing?, do not modify file pointer, return error
* <li> lseek <b>(SEEK_END, value = 0)</b> - return HISTOGRAMS_FILE_SIZE
* <li> lseek <b>(SEEK_END, LSEEK_HIST_WAIT_Y)</b> - set histogram waiting for the Y (actually G1) histogram (default after open)
* <li> lseek <b>(SEEK_END, LSEEK_HIST_WAIT_C)</b> - set histogram waiting for the C (actually R, G2, B) histograms to become available - implies G1 too
* <li> lseek <b>(SEEK_END, LSEEK_HIST_SET_CHN +4*port+ subchannel)</b> - select sensor port and subchannel. Returns -ENXIO if port/subchannel does not
* match any active sensor.
* <li> lseek <b>(SEEK_END, LSEEK_HIST_NEEDED)</b> set histogram "needed" bits
* <li> lseek <b>(SEEK_END, LSEEK_HIST_REQ_EN)</b> - (default)enable histogram request when reading histogram (safer, but may be not desirable in HDR mode) - default after opening
* <li> lseek <b>(SEEK_END, LSEEK_HIST_REQ_DIS</b>) - disable histogram request when reading histogram - will read latest available relying it is available </ul>
* @param file
* @param offset
* @param orig SEEK_SET, SEEK_CUR or SEEK_SET END
* @return file position (absolute frame number)
* @return file position (histogram frame index (combined frame index and channel))
*/
// TODO: add flag that will allow driver to wakeup processes before the specified frame comes ?
#define CCAM_RESET_MCONTR_ON // Set mode that resets memory controller pointers after each frame sync. TODO: Later - make it work without?
#define CCAM_ENDFRAMES_EN // Enable ending frame being compressed if no more data will be available (frame ended before specified number of blocks compressed)
///< <li> --++bits 2:0 Column skip - number of column-pairs to skip (0 - each column-pair). Column-pair period will be this value+1 (even in binning mode)
///< <li> --++bits 5:4 Column Bin - number of columns to bin to the first one. Not clear is binning also in pairs? needs testing</ul>
///< Column start address should be multiple of <column bin>+1
#define P_MT9X001_GREEN1 0x2b ///< Green Gain 1, dflt= 0x08 (1x), for MT9T bits 14:8 - "digital gain"
#define P_MT9X001_BLUE 0x2c ///< Green Gain 1, dflt= 0x08 (1x), for MT9T bits 14:8 - "digital gain"
#define P_MT9X001_RED 0x2d ///< Green Gain 1, dflt= 0x08 (1x), for MT9T bits 14:8 - "digital gain"
#define P_MT9X001_GREEN2 0x2e ///< Green Gain 1, dflt= 0x08 (1x), for MT9T bits 14:8 - "digital gain"
#define P_MT9X001_ALLGAINS 0x35 ///< write to all 4 gains (0x2b,0x2c,0x2d,0x2e), read from red (0x2b)
#define P_MT9X001_DESIRBLACK 0x49 ///< bits 11:2 - desired black level (MT9T,P only dflt=0xa8)
#define P_MT9X001_ROWRBLACKOFFS 0x4b ///< bits 11:0 - desired black level (MT9P only - dflt=0x28)
// Here we see that 10359A responds somehow. If next fails, no sense to try other sensor types.
multi_phases_initialized=0;
sensor->sensorType=SENSOR_NONE;
...
...
@@ -1026,7 +1006,18 @@ int multisensor_pgm_detectsensor (int sensor_port, ///< sensor p
GLOBALPARS(sensor_port,G_SENS_AVAIL)|=1<<(GLOBALPARS(sensor_port,G_SENS_AVAIL));// temporary to indicate sensor detection functions that they need to initialize multisensor registers
for(i=0;i<MAX_SENSORS;i++){
MDF24(printk("Probing sensor port %d, i2c bitdelays=0x%08x\n",i,i2c_delays(0)));
