Commit d22ee870 authored by dickelbeck's avatar dickelbeck

formatting

parent 34728bec
...@@ -201,35 +201,35 @@ CTLs DIALOG_LAYERS_SETUP::getCTLs( int aLayerNumber ) ...@@ -201,35 +201,35 @@ CTLs DIALOG_LAYERS_SETUP::getCTLs( int aLayerNumber )
switch( aLayerNumber ) switch( aLayerNumber )
{ {
case ADHESIVE_N_FRONT: RETAUX( m_AdhesFront ); case ADHESIVE_N_FRONT: RETAUX( m_AdhesFront );
case SOLDERPASTE_N_FRONT: RETAUX( m_SoldPFront ); case SOLDERPASTE_N_FRONT: RETAUX( m_SoldPFront );
case SILKSCREEN_N_FRONT: RETAUX( m_SilkSFront ); case SILKSCREEN_N_FRONT: RETAUX( m_SilkSFront );
case SOLDERMASK_N_FRONT: RETAUX( m_MaskFront ); case SOLDERMASK_N_FRONT: RETAUX( m_MaskFront );
case LAYER_N_FRONT: RETCOP( m_Front ); case LAYER_N_FRONT: RETCOP( m_Front );
case LAYER_N_2: RETCOP( m_Inner2 ); case LAYER_N_2: RETCOP( m_Inner2 );
case LAYER_N_3: RETCOP( m_Inner3 ); case LAYER_N_3: RETCOP( m_Inner3 );
case LAYER_N_4: RETCOP( m_Inner4 ); case LAYER_N_4: RETCOP( m_Inner4 );
case LAYER_N_5: RETCOP( m_Inner5 ); case LAYER_N_5: RETCOP( m_Inner5 );
case LAYER_N_6: RETCOP( m_Inner6 ); case LAYER_N_6: RETCOP( m_Inner6 );
case LAYER_N_7: RETCOP( m_Inner7 ); case LAYER_N_7: RETCOP( m_Inner7 );
case LAYER_N_8: RETCOP( m_Inner8 ); case LAYER_N_8: RETCOP( m_Inner8 );
case LAYER_N_9: RETCOP( m_Inner9 ); case LAYER_N_9: RETCOP( m_Inner9 );
case LAYER_N_10: RETCOP( m_Inner10 ); case LAYER_N_10: RETCOP( m_Inner10 );
case LAYER_N_11: RETCOP( m_Inner11 ); case LAYER_N_11: RETCOP( m_Inner11 );
case LAYER_N_12: RETCOP( m_Inner12 ); case LAYER_N_12: RETCOP( m_Inner12 );
case LAYER_N_13: RETCOP( m_Inner13 ); case LAYER_N_13: RETCOP( m_Inner13 );
case LAYER_N_14: RETCOP( m_Inner14 ); case LAYER_N_14: RETCOP( m_Inner14 );
case LAYER_N_15: RETCOP( m_Inner15 ); case LAYER_N_15: RETCOP( m_Inner15 );
case LAYER_N_BACK: RETCOP( m_Back ); case LAYER_N_BACK: RETCOP( m_Back );
case SOLDERMASK_N_BACK: RETAUX( m_MaskBack ); case SOLDERMASK_N_BACK: RETAUX( m_MaskBack );
case SILKSCREEN_N_BACK: RETAUX( m_SilkSBack ); case SILKSCREEN_N_BACK: RETAUX( m_SilkSBack );
case SOLDERPASTE_N_BACK: RETAUX( m_SoldPBack ); case SOLDERPASTE_N_BACK: RETAUX( m_SoldPBack );
case ADHESIVE_N_BACK: RETAUX( m_AdhesBack ); case ADHESIVE_N_BACK: RETAUX( m_AdhesBack );
case EDGE_N: RETAUX( m_PCBEdges ); case EDGE_N: RETAUX( m_PCBEdges );
case ECO2_N: RETAUX( m_Eco2 ); case ECO2_N: RETAUX( m_Eco2 );
case ECO1_N: RETAUX( m_Eco1 ); case ECO1_N: RETAUX( m_Eco1 );
case COMMENT_N: RETAUX( m_Comments ); case COMMENT_N: RETAUX( m_Comments );
case DRAW_N: RETAUX( m_Drawings ); case DRAW_N: RETAUX( m_Drawings );
default: default:
// wxDEBUGMSG( "bad layer id" ); // wxDEBUGMSG( "bad layer id" );
return CTLs( 0, 0, 0 ); return CTLs( 0, 0, 0 );
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment