More about undo/redo in pcbnew

common/class_undoredo_container.cpp

@@ -292,12 +292,12 @@ bool PICKED_ITEMS_LIST::SetPickedItemStatus( UndoRedoOpType aStatus, unsigned aI
 }
 
 
-/** function RemovePickedItem
+/** function RemovePicker
  * remove one entry (one picker) from the list of picked items
  * @param aIdx = index of the picker in the picked list
  * @return true if ok, or false if did not exist
  */
-bool PICKED_ITEMS_LIST::RemovePickedItem( unsigned aIdx )
+bool PICKED_ITEMS_LIST::RemovePicker( unsigned aIdx )
 {
     if( aIdx >= m_ItemsList.size() )
         return false;
@@ -308,17 +308,11 @@ bool PICKED_ITEMS_LIST::RemovePickedItem( unsigned aIdx )
 
 /** Function CopyList
  * copy all data from aSource
- * Items picked are not copied. just pointer on them are copied
+ * Picked items are not copied. just pointers on them are copied
  */
 void PICKED_ITEMS_LIST::CopyList( const PICKED_ITEMS_LIST& aSource )
 {
-    ITEM_PICKER picker;
-
-    for( unsigned ii = 0; ii < aSource.GetCount(); ii++ )
-    {
-        picker = aSource.m_ItemsList[ii];
-        PushItem( picker );
-    }
+    m_ItemsList = aSource.m_ItemsList;  // Vector's copy
 }
 
 

eeschema/schematic_undo_redo.cpp

@@ -274,37 +274,38 @@ void WinEDA_SchematicFrame::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
     SCH_ITEM*          CopyOfItem;
     PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
     commandToUndo->m_TransformPoint = aTransformPoint;
+    // Copy picker list:
+    commandToUndo->CopyList( aItemsList );
 
-    ITEM_PICKER        itemWrapper;
-
-    for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
+    // Verify list, and creates data if needed
+    for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
     {
-        SCH_ITEM*      item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
-        if( item == NULL )
-            continue;
-        UndoRedoOpType command    = aItemsList.GetPickedItemStatus( ii );
+        SCH_ITEM*      item = (SCH_ITEM*) commandToUndo->GetPickedItem( ii );
+        wxASSERT( item );
+
+        UndoRedoOpType command    = commandToUndo->GetPickedItemStatus( ii );
         if( command == UR_UNSPECIFIED )
         {
             command = aTypeCommand;
+            commandToUndo->SetPickedItemStatus(command, ii );
         }
-        itemWrapper.m_PickedItem = item;
-        itemWrapper.m_PickedItemType = item->Type();
-        itemWrapper.m_UndoRedoStatus = command;
-        itemWrapper.m_Link = aItemsList.GetPickedItemLink( ii );
+
         switch( command )
         {
         case UR_CHANGED:        /* Create a copy of item */
-            if( itemWrapper.m_Link == NULL )
-                itemWrapper.m_Link = DuplicateStruct( item );
-            if ( itemWrapper.m_Link )
-                commandToUndo->PushItem( itemWrapper );
+            /* If needed, create a copy of item, and put in undo list
+             * in the picker, as link
+             * If this link is not null, the copy is already done
+             */
+            if( commandToUndo->GetPickedItemLink(ii) == NULL )
+                commandToUndo->SetPickedItemLink( DuplicateStruct( item ), ii );
+            wxASSERT( commandToUndo->GetPickedItemLink(ii) );
             break;
 
         case UR_MOVED:
         case UR_MIRRORED_Y:
         case UR_NEW:
         case UR_DELETED:
-            commandToUndo->PushItem( itemWrapper );
             break;
 
         default:
@@ -325,7 +326,7 @@ void WinEDA_SchematicFrame::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
         /* Clear redo list, because after new save there is no redo to do */
         GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
     }
-    else
+    else    // Should not occur
         delete commandToUndo;
 }
 

include/class_undoredo_container.h

@@ -196,12 +196,12 @@ public:
      */
     bool            SetPickedItemStatus( UndoRedoOpType aStatus, unsigned aIdx );
 
-    /** function RemovePickedItem
-     * remùove one entry (one picker) from the list of picked items
+    /** function RemovePicker
+     * remove one entry (one picker) from the list of picked items
      * @param aIdx = index of the picker in the picked list
      * @return true if ok, or false if did not exist
      */
-    bool            RemovePickedItem( unsigned aIdx );
+    bool            RemovePicker( unsigned aIdx );
 
     /** Function CopyList
      * copy all data from aSource

include/wxBasePcbFrame.h

@@ -121,9 +121,6 @@ public:
     int                      ReadSetup( FILE* File, int* LineNum );
     int                      ReadGeneralDescrPcb( FILE* File, int* LineNum );
 
-    // PCB handling
-    bool                     Clear_Pcb( bool query );
-
 
     /**
      * Function PcbGeneralLocateAndDisplay

include/wxPcbStruct.h

@@ -254,6 +254,13 @@ public:
     int              SavePcbFormatAscii( FILE* File );
     bool             WriteGeneralDescrPcb( FILE* File );
 
+    // BOARD handling
+    /** function Clear_Pcb()
+     * delete all and reinitialize the current board
+     * @param aQuery = true to prompt user for confirmation, false to initialize silently
+     */
+    bool                     Clear_Pcb( bool aQuery );
+
     /**
      * Function RecreateBOMFileFromBoard
      * Recreates a .cmp file from the current loaded board
@@ -348,12 +355,6 @@ public:
     // loading modules: see WinEDA_BasePcbFrame
 
     // Board handling
-    void             Erase_Zones( bool query );
-    void             Erase_Segments_Pcb( bool is_edges, bool query );
-    void             Erase_Pistes( wxDC* DC, int masque_type, bool query );
-    void             Erase_Modules( bool query );
-    void             Erase_Textes_Pcb( bool query );
-    void             Erase_Marqueurs();
     void             RemoveStruct( BOARD_ITEM* Item, wxDC* DC );
     void             Via_Edit_Control( wxDC* DC, int command_type, SEGVIA* via );
 
@@ -655,6 +656,13 @@ public:
     virtual void OnSelectGrid( wxCommandEvent& event );
     void         LoadModuleFromBoard( wxCommandEvent& event );
 
+    // BOARD handling
+    /** function Clear_Pcb()
+     * delete all and reinitialize the current board
+     * @param aQuery = true to prompt user for confirmation, false to initialize silently
+     */
+    bool                     Clear_Pcb( bool aQuery );
+
     /* handlers for block commands */
     int          ReturnBlockCommand( int key );
     virtual void HandleBlockPlace( wxDC* DC );

pcbnew/block.cpp

@@ -417,7 +417,6 @@ int WinEDA_PcbFrame::HandleBlockEnd( wxDC* DC )
  */
 void WinEDA_PcbFrame::Block_SelectItems()
 {
-    BOARD_ITEM* PtStruct;
     int         masque_layer;
 
     GetScreen()->m_BlockLocate.Normalize();
@@ -428,7 +427,6 @@ void WinEDA_PcbFrame::Block_SelectItems()
     /* Effacement des modules */
     if( Block_Include_Modules )
     {
-        ;
         for( MODULE* module = m_Pcb->m_Modules; module != NULL; module = module->Next() )
         {
             if( module->HitTest( GetScreen()->m_BlockLocate ) )
@@ -463,7 +461,7 @@ void WinEDA_PcbFrame::Block_SelectItems()
     if( !Block_Include_Edges_Items )
         masque_layer &= ~EDGE_LAYER;
 
-    for( PtStruct = m_Pcb->m_Drawings; PtStruct != NULL; PtStruct = PtStruct->Next() )
+    for( BOARD_ITEM* PtStruct = m_Pcb->m_Drawings; PtStruct != NULL; PtStruct = PtStruct->Next() )
     {
         bool select_me = false;
         switch( PtStruct->Type() )
@@ -512,19 +510,25 @@ void WinEDA_PcbFrame::Block_SelectItems()
         }
     }
 
-    /* Effacement des Zones */
+    /* Zone selection */
     if( Block_Include_Zones )
     {
+#if 0  
+        /* This section can creates problems if selected:
+         * m_Pcb->m_Zone can have a *lot* of items (100 000 is easily possible)
+         * so it is not selected (and TODO: will be removed, one day)
+         */
         for( SEGZONE* pt_segm = m_Pcb->m_Zone; pt_segm != NULL; pt_segm = pt_segm->Next() )
-        {
+        {    /* Segments used in Zone filling selection */
+
             if( pt_segm->HitTest( GetScreen()->m_BlockLocate ) )
             {
-                picker.m_PickedItem     = PtStruct;
-                picker.m_PickedItemType = PtStruct->Type();
+                picker.m_PickedItem     = pt_segm;
+                picker.m_PickedItemType = pt_segm->Type();
                 itemsList->PushItem( picker );
             }
         }
-
+#endif
         for( int ii = 0; ii < m_Pcb->GetAreaCount(); ii++ )
         {
             if( m_Pcb->GetArea( ii )->HitTest( GetScreen()->m_BlockLocate ) )
@@ -536,7 +540,7 @@ void WinEDA_PcbFrame::Block_SelectItems()
             }
         }
     }
-}
+ }
 
 
 /**************************************************************************/
@@ -630,13 +634,20 @@ void WinEDA_PcbFrame::Block_Delete()
         case TYPE_TEXTE:                    // a text on a layer
         case TYPE_TRACK:                    // a track segment (segment on a copper layer)
         case TYPE_VIA:                      // a via (like atrack segment on a copper layer)
-        case TYPE_ZONE:                     // a segment used to fill a zome area (segment on a copper layer)
-        case TYPE_MARKER_PCB:                   // a marker used to show something
         case TYPE_COTATION:                 // a dimension (graphic item)
         case TYPE_MIRE:                     // a target (graphic item)
             item->UnLink();
             break;
 
+        // These items are deleted, but not put in undo list
+        case TYPE_MARKER_PCB:               // a marker used to show something
+        case TYPE_ZONE:                     // a segment used to fill a zome area (segment on a copper layer)
+            item->UnLink();
+            itemsList->RemovePicker( ii );
+            ii--;
+            item->DeleteStructure();
+            break;
+
         default:
             wxMessageBox( wxT( "WinEDA_PcbFrame::Block_Delete( ) error: unexpected type" ) );
             break;
@@ -696,7 +707,6 @@ void WinEDA_PcbFrame::Block_Rotate()
             m_Pcb->m_Status_Pcb = 0;
         break;
 
-        case TYPE_ZONE:                  // a segment used to fill a zone area (segment on a copper layer)
         case TYPE_ZONE_CONTAINER:
         case TYPE_DRAWSEGMENT:
         case TYPE_TEXTE:
@@ -704,6 +714,11 @@ void WinEDA_PcbFrame::Block_Rotate()
         case TYPE_COTATION:
             break;
 
+        // This item is not put in undo list
+        case TYPE_ZONE:                     // a segment used to fill a zome area (segment on a copper layer)
+            itemsList->RemovePicker( ii );
+            ii--;
+            break;
 
         default:
             wxMessageBox( wxT( "WinEDA_PcbFrame::Block_Rotate( ) error: unexpected type" ) );
@@ -763,7 +778,6 @@ void WinEDA_PcbFrame::Block_Flip()
             m_Pcb->m_Status_Pcb = 0;
             break;
 
-        case TYPE_ZONE:                  // a segment used to fill a zone area (segment on a copper layer)
         case TYPE_ZONE_CONTAINER:
         case TYPE_DRAWSEGMENT:
         case TYPE_TEXTE:
@@ -771,6 +785,12 @@ void WinEDA_PcbFrame::Block_Flip()
         case TYPE_COTATION:
             break;
 
+        // This item is not put in undo list
+        case TYPE_ZONE:                     // a segment used to fill a zome area (segment on a copper layer)
+            itemsList->RemovePicker( ii );
+            ii--;
+            break;
+
 
         default:
             wxMessageBox( wxT( "WinEDA_PcbFrame::Block_Flip( ) error: unexpected type" ) );
@@ -825,7 +845,6 @@ void WinEDA_PcbFrame::Block_Move()
             m_Pcb->m_Status_Pcb = 0;
         break;
 
-        case TYPE_ZONE:                  // a segment used to fill a zome area (segment on a copper layer)
         case TYPE_ZONE_CONTAINER:
         case TYPE_DRAWSEGMENT:
         case TYPE_TEXTE:
@@ -833,6 +852,12 @@ void WinEDA_PcbFrame::Block_Move()
         case TYPE_COTATION:
             break;
 
+        // This item is not put in undo list
+        case TYPE_ZONE:                     // a segment used to fill a zome area (segment on a copper layer)
+            itemsList->RemovePicker( ii );
+            ii--;
+            break;
+
         default:
             wxMessageBox( wxT( "WinEDA_PcbFrame::Block_Move( ) error: unexpected type" ) );
             break;
@@ -905,10 +930,8 @@ void WinEDA_PcbFrame::Block_Duplicate()
 
         case TYPE_ZONE:                  // a segment used to fill a zome area (segment on a copper layer)
         {
-            SEGZONE* track     = (SEGZONE*) item;
-            SEGZONE* new_track = (SEGZONE*) track->Copy();
-            newitem = new_track;
-            m_Pcb->m_Track.PushFront( new_track );
+            // SEG_ZONE items are not copied or put in undo list
+            // they must be recreated by zone filling
         }
         break;
 

pcbnew/board_undo_redo.cpp

@@ -126,11 +126,14 @@ void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
     }
 
     // Swap layers:
-    int layer, layerimg;
-    layer    = aItem->GetLayer();
-    layerimg = aImage->GetLayer();
-    aItem->SetLayer( layerimg );
-    aImage->SetLayer( layer );
+    if( aItem->Type() != TYPE_MODULE )     // Modules have a global swap function
+    {
+        int layer, layerimg;
+        layer    = aItem->GetLayer();
+        layerimg = aImage->GetLayer();
+        aItem->SetLayer( layerimg );
+        aImage->SetLayer( layer );
+    }
 
     switch( aItem->Type() )
     {
@@ -211,7 +214,7 @@ BOARD_ITEM* DuplicateStruct( BOARD_ITEM* aItem )
 {
     if( aItem == NULL )
     {
-        wxMessageBox( wxT( "DuplicateStruct error: NULL struct" ) );
+        wxMessageBox( wxT( "DuplicateStruct() error: NULL aItem" ) );
         return NULL;
     }
 
@@ -380,28 +383,31 @@ void WinEDA_PcbFrame::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
     PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
 
     commandToUndo->m_TransformPoint = aTransformPoint;
+    // Copy picker list:
+    commandToUndo->CopyList( aItemsList );
 
-    ITEM_PICKER itemWrapper;
-
-    for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
+    // Verify list, and creates data if needed
+    for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
     {
-        BOARD_ITEM*    item    = (BOARD_ITEM*) aItemsList.GetPickedItem( ii );
-        UndoRedoOpType command = aItemsList.GetPickedItemStatus( ii );
+        BOARD_ITEM*    item    = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
+        UndoRedoOpType command = commandToUndo->GetPickedItemStatus( ii );
         if( command == UR_UNSPECIFIED )
+        {
             command = aTypeCommand;
+            commandToUndo->SetPickedItemStatus(command, ii );
+        }
 
         wxASSERT( item );
-        itemWrapper.m_PickedItem     = item;
-        itemWrapper.m_PickedItemType = item->Type();
-        itemWrapper.m_UndoRedoStatus = command;
-        itemWrapper.m_Link = aItemsList.GetPickedItemLink( ii );
         switch( command )
         {
-        case UR_CHANGED:        /* If needed, create a copy of item, and put in undo list */
-            if( itemWrapper.m_Link == NULL )    // When not null, the copy is already done
-                itemWrapper.m_Link = DuplicateStruct( item );
-            if( itemWrapper.m_Link )
-                commandToUndo->PushItem( itemWrapper );
+        case UR_CHANGED:
+            /* If needed, create a copy of item, and put in undo list
+             * in the picker, as link
+             * If this link is not null, the copy is already done
+             */
+            if( commandToUndo->GetPickedItemLink(ii) == NULL )
+                commandToUndo->SetPickedItemLink( DuplicateStruct( item ), ii );
+            wxASSERT( commandToUndo->GetPickedItemLink(ii) );
             break;
 
         case UR_MOVED:
@@ -410,7 +416,6 @@ void WinEDA_PcbFrame::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
         case UR_FLIPPED:
         case UR_NEW:
         case UR_DELETED:
-            commandToUndo->PushItem( itemWrapper );
             break;
 
         default:
@@ -428,10 +433,10 @@ void WinEDA_PcbFrame::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
         /* Save the copy in undo list */
         GetScreen()->PushCommandToUndoList( commandToUndo );
 
-        /* Clear redo list, because after new save there is no redo to do */
+        /* Clear redo list, because after a new command one cannot redo a command */
         GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
     }
-    else
+    else    // Should not occur
         delete commandToUndo;
 }
 
@@ -452,21 +457,23 @@ void WinEDA_PcbFrame::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRe
     {
         item = (BOARD_ITEM*) aList->GetPickedItem( ii );
         wxASSERT( item );
+#if 1
         if( aList->GetPickedItemStatus( ii ) != UR_DELETED )
         {
             if( !TestForExistingItem( GetBoard(), item ) )
             {
                 // Remove this non existant item
-                aList->RemovePickedItem( ii );
+                aList->RemovePicker( ii );
                 ii--;       // the current item was removed, ii points now the next item
                             // whe must decrement it because it will be incremented
                 not_found = true;
                 continue;
             }
         }
+#endif
         item->m_Flags = 0;
 
-        // see if one must rebuild ratsnets and pointers lists
+        // see if we must rebuild ratsnets and pointers lists
         switch( item->Type() )
         {
         case TYPE_MODULE:
@@ -528,9 +535,9 @@ void WinEDA_PcbFrame::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRe
     }
 
     if( not_found )
-        wxMessageBox( wxT( "Incomplete undo/redo command: item not found" ) );
+        wxMessageBox( wxT( "Incomplete undo/redo operation: some items not found" ) );
 
-    // Rebuild pointers and rastnest
+    // Rebuild pointers and rastnest that can be changed.
     if( reBuild_ratsnest )
         Compile_Ratsnest( NULL, true );
 }
@@ -542,8 +549,8 @@ void WinEDA_PcbFrame::GetBoardFromUndoList( wxCommandEvent& event )
 
 /** Function GetBoardFromUndoList
  *  Undo the last edition:
- *  - Save the current board in Redo list
- *  - Get an old version of the board from Undo list
+ *  - Save the current board state in Redo list
+ *  - Get an old version of the board state from Undo list
  *  @return none
  */
 {
@@ -612,7 +619,7 @@ void PCB_SCREEN::ClearUndoORRedoList( UNDO_REDO_CONTAINER& aList, int aItemCount
     unsigned icnt = aList.m_CommandsList.size();
     if( aItemCount > 0 )
         icnt = aItemCount;
-    bool     displ_error = true;
+
     for( unsigned ii = 0; ii < icnt; ii++ )
     {
         if( aList.m_CommandsList.size() == 0 )

pcbnew/dialog_edit_module.cpp

@@ -533,6 +533,14 @@ void WinEDA_ModulePropertiesFrame::OnOkClick( wxCommandEvent& event )
     bool change_layer = FALSE;
     wxPoint modpos;
 
+    if( m_CurrentModule->m_Flags == 0 )       // this is a simple edition, we must create an undo entry
+    {
+        if( m_Parent->m_Ident == PCB_FRAME )
+            m_Parent->SaveCopyInUndoList( m_CurrentModule, UR_CHANGED );
+        else
+            m_Parent->SaveCopyInUndoList( m_CurrentModule, UR_MODEDIT );
+    }
+
     if( m_DC )
     {
         m_Parent->DrawPanel->CursorOff( m_DC );

pcbnew/editedge.cpp

@@ -20,8 +20,8 @@ static void Montre_Position_NewSegment( WinEDA_DrawPanel* panel, wxDC* DC, bool
 static void Move_Segment( WinEDA_DrawPanel* panel, wxDC* DC, bool erase );
 
 /* Variables locales : */
-static wxPoint cursor_pos;  // position originelle du curseur souris (fct deplacement)
-static wxPoint cursor_pos0; // position courante du curseur souris
+static wxPoint s_InitialPosition;  // position originelle du curseur souris (fct deplacement)
+static wxPoint s_LastPosition; // position courante du curseur souris
 
 /****************************************************************************/
 void WinEDA_PcbFrame::Start_Move_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC )
@@ -34,7 +34,7 @@ void WinEDA_PcbFrame::Start_Move_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC )
         return;
     drawitem->Draw( DrawPanel, DC, GR_XOR );
     drawitem->m_Flags |= IS_MOVED;
-    cursor_pos = cursor_pos0 = GetScreen()->m_Curseur;
+    s_InitialPosition = s_LastPosition = GetScreen()->m_Curseur;
     drawitem->DisplayInfo( this );
     DrawPanel->ManageCurseur = Move_Segment;
     DrawPanel->ForceCloseManageCurseur = Exit_EditEdge;
@@ -54,6 +54,7 @@ void WinEDA_PcbFrame::Place_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC )
     if( drawitem == NULL )
         return;
 
+    SaveCopyInUndoList(drawitem, UR_MOVED, s_LastPosition - s_InitialPosition);
     drawitem->Draw( DrawPanel, DC, GR_OR );
     DrawPanel->ManageCurseur = NULL;
     DrawPanel->ForceCloseManageCurseur = NULL;
@@ -82,13 +83,10 @@ static void Move_Segment( WinEDA_DrawPanel* panel, wxDC* DC, bool erase )
         Segment->Draw( panel, DC, GR_XOR );
 
     wxPoint delta;
-    delta.x = panel->GetScreen()->m_Curseur.x - cursor_pos.x;
-    delta.y = panel->GetScreen()->m_Curseur.y - cursor_pos.y;
-    Segment->m_Start.x += delta.x;
-    Segment->m_Start.y += delta.y;
-    Segment->m_End.x   += delta.x;
-    Segment->m_End.y   += delta.y;
-    cursor_pos = panel->GetScreen()->m_Curseur;
+    delta = panel->GetScreen()->m_Curseur - s_LastPosition;
+    Segment->m_Start += delta;
+    Segment->m_End   += delta;
+    s_LastPosition = panel->GetScreen()->m_Curseur;
 
     Segment->Draw( panel, DC, GR_XOR );
     DisplayOpt.DisplayDrawItems = t_fill;
@@ -151,10 +149,12 @@ void WinEDA_PcbFrame::Delete_Drawings_All_Layer( DRAWSEGMENT* Segment, wxDC* DC
     if( !IsOK( this, msg ) )
         return;
 
+    PICKED_ITEMS_LIST pickList;
+    ITEM_PICKER picker(NULL, UR_DELETED);
+    
     BOARD_ITEM*     PtNext;
     for( BOARD_ITEM* item = GetBoard()->m_Drawings;  item;  item = PtNext )
     {
-        GetScreen()->SetModify();
         PtNext = item->Next();
 
         switch( item->Type() )
@@ -165,7 +165,9 @@ void WinEDA_PcbFrame::Delete_Drawings_All_Layer( DRAWSEGMENT* Segment, wxDC* DC
             if( item->GetLayer() == layer )
             {
                 item->Draw( DrawPanel, DC, GR_XOR );
-                item->DeleteStructure();
+                item->UnLink();
+                picker.m_PickedItem = item;
+                pickList.PushItem(picker);
             }
             break;
 
@@ -174,6 +176,12 @@ void WinEDA_PcbFrame::Delete_Drawings_All_Layer( DRAWSEGMENT* Segment, wxDC* DC
             break;
         }
     }
+
+    if( pickList.GetCount() )
+    {
+        GetScreen()->SetModify();
+        SaveCopyInUndoList(Segment, UR_DELETED);
+    }
 }
 
 
@@ -194,8 +202,8 @@ static void Exit_EditEdge( WinEDA_DrawPanel* Panel, wxDC* DC )
     }
     else
     {
-        wxPoint             pos = Panel->GetScreen()->m_Curseur;
-        Panel->GetScreen()->m_Curseur = cursor_pos0;
+        wxPoint pos = Panel->GetScreen()->m_Curseur;
+        Panel->GetScreen()->m_Curseur = s_InitialPosition;
         Panel->ManageCurseur( Panel, DC, TRUE );
         Panel->GetScreen()->m_Curseur = pos;
         Segment->m_Flags = 0;
@@ -247,6 +255,7 @@ DRAWSEGMENT* WinEDA_PcbFrame::Begin_DrawSegment( DRAWSEGMENT* Segment,
         {
             if( Segment->m_Shape == S_SEGMENT )
             {
+                SaveCopyInUndoList(Segment, UR_NEW );
                 GetBoard()->Add( Segment );
 
                 GetScreen()->SetModify();
@@ -287,17 +296,15 @@ void WinEDA_PcbFrame::End_Edge( DRAWSEGMENT* Segment, wxDC* DC )
     Segment->Draw( DrawPanel, DC, GR_OR );
 
     /* Effacement si Longueur nulle */
-    if( (Segment->m_Start.x == Segment->m_End.x)
-       && (Segment->m_Start.y == Segment->m_End.y) )
+    if( Segment->m_Start == Segment->m_End)
         Segment ->DeleteStructure();
 
     else
     {
         Segment->m_Flags = 0;
-
         GetBoard()->Add( Segment );
-
         GetScreen()->SetModify();
+        SaveCopyInUndoList(Segment, UR_NEW );
     }
 
     DrawPanel->ManageCurseur = NULL;

pcbnew/modedit.cpp

@@ -364,8 +364,8 @@ void WinEDA_ModuleEditFrame::Process_Special_Functions( wxCommandEvent& event )
         if( GetBoard()->m_Modules )
             GetBoard()->m_Modules->m_Flags = 0;
 
-        //if either m_Reference or m_Value are gone, reinstate them -
-        //otherwise it becomes hard to see what you are working with in the layout!
+        // if either m_Reference or m_Value are gone, reinstall them -
+        // otherwise you cannot see what you are doing on board
         if( GetBoard() && GetBoard()->m_Modules )
         {
             TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;

pcbnew/modules.cpp

@@ -122,7 +122,7 @@ void WinEDA_PcbFrame::StartMove_Module( MODULE* module, wxDC* DC )
     if( g_Show_Ratsnest )
         DrawGeneralRatsnest( DC );
 
-    if( g_DragSegmentList ) /* Anormal ! */
+    if( g_DragSegmentList ) /* Should not occur ! */
     {
         EraseDragListe();
     }