Refactored PCB plot infrastructure

Removed filename from the BASE_SCREEN class
Scripting support for board plot

3d-viewer/3d_canvas.cpp

@@ -586,7 +586,7 @@ void EDA_3D_CANVAS::SetLights()
  */
 void EDA_3D_CANVAS::TakeScreenshot( wxCommandEvent& event )
 {
-    wxFileName fn( Parent()->Parent()->GetScreen()->GetFileName() );
+    wxFileName fn( Parent()->GetDefaultFileName() );
     wxString   FullFileName;
     wxString   file_ext, mask;
     bool       fmt_is_jpeg = false;
@@ -598,7 +598,7 @@ void EDA_3D_CANVAS::TakeScreenshot( wxCommandEvent& event )
     {
         file_ext     = fmt_is_jpeg ? wxT( "jpg" ) : wxT( "png" );
         mask         = wxT( "*." ) + file_ext;
-        FullFileName = Parent()->Parent()->GetScreen()->GetFileName();
+        FullFileName = Parent()->GetDefaultFileName();
         fn.SetExt( file_ext );
 
         FullFileName = EDA_FileSelector( _( "3D Image filename:" ), wxEmptyString,

3d-viewer/3d_viewer.h

@@ -187,6 +187,7 @@ private:
     wxSize          m_FrameSize;
     wxAuiManager    m_auimgr;
     bool            m_reloadRequest;
+    wxString        m_defaultFileName;  /// Filename to propose for screenshot
 
 public:
     EDA_3D_FRAME( PCB_BASE_FRAME* parent, const wxString& title,
@@ -216,6 +217,8 @@ public:
      */
     void NewDisplay();
 
+    void SetDefaultFileName(const wxString &aFn) { m_defaultFileName = aFn; }
+    const wxString &GetDefaultFileName() const { return m_defaultFileName; }
 private:
     void Exit3DFrame( wxCommandEvent& event );
     void OnCloseWindow( wxCloseEvent& Event );

common/common_plotDXF_functions.cpp

@@ -43,8 +43,8 @@ void DXF_PLOTTER::SetViewport( const wxPoint& aOffset, double aIusPerDecimil,
     iuPerDeviceUnit = 1.0 / aIusPerDecimil; // Gives a DXF in decimils
     iuPerDeviceUnit *= 0.00254;             // ... now in mm
 
-    SetDefaultLineWidth( 0 );    // No line width on DXF
-    plotMirror = false;             // No mirroring on DXF 
+    SetDefaultLineWidth( 0 );               // No line width on DXF
+    plotMirror = false;                     // No mirroring on DXF
     currentColor = BLACK;
 }
 

common/worksheet.cpp

@@ -1004,7 +1004,7 @@ Ki_WorkSheetData WS_Segm5_LT =
 
 
 void EDA_DRAW_FRAME::TraceWorkSheet( wxDC* aDC, BASE_SCREEN* aScreen, int aLineWidth,
-                                     double aScalar )
+                                     double aScalar, const wxString &aFilename )
 {
     if( !m_showBorderAndTitleBlock )
         return;
@@ -1024,7 +1024,7 @@ void EDA_DRAW_FRAME::TraceWorkSheet( wxDC* aDC, BASE_SCREEN* aScreen, int aLineW
     wxPoint margin_left_top( pageInfo.GetLeftMarginMils(), pageInfo.GetTopMarginMils() );
     wxPoint margin_right_bottom( pageInfo.GetRightMarginMils(), pageInfo.GetBottomMarginMils() );
     wxString paper = pageInfo.GetType();
-    wxString file = aScreen->GetFileName();
+    wxString file = aFilename;
     TITLE_BLOCK t_block = GetTitleBlock();
     int number_of_screens = aScreen->m_NumberOfScreens;
     int screen_to_draw = aScreen->m_ScreenNumber;

eeschema/dialogs/dialog_SVG_print.cpp

@@ -237,7 +237,8 @@ bool DIALOG_SVG_PRINT::DrawSVGPage( EDA_DRAW_FRAME* frame,
                                                    sheetSize.y/2) );
 
     if( aPrint_Sheet_Ref )
-        frame->TraceWorkSheet( &dc, screen, g_DrawDefaultLineThickness, IU_PER_MILS );
+        frame->TraceWorkSheet( &dc, screen, g_DrawDefaultLineThickness,
+                IU_PER_MILS, frame->GetScreenDesc() );
 
     screen->m_IsPrinting   = false;
     panel->SetClipBox( tmp );

eeschema/dialogs/dialog_plot_schematic_DXF.cpp

@@ -241,7 +241,11 @@ void DIALOG_PLOT_SCHEMATIC_DXF::PlotOneSheetDXF( const wxString&    FileName,
     if( m_plot_Sheet_Ref )
     {
         plotter->SetColor( BLACK );
-        m_Parent->PlotWorkSheet( plotter, screen, g_DrawDefaultLineThickness );
+        PlotWorkSheet( plotter, m_Parent->GetTitleBlock(),
+                       m_Parent->GetPageSettings(),
+                       screen->m_ScreenNumber, screen->m_NumberOfScreens,
+                       m_Parent->GetScreenDesc(),
+                       screen->GetFileName() );
     }
 
     screen->Plot( plotter );

eeschema/dialogs/dialog_plot_schematic_HPGL.cpp

@@ -394,7 +394,11 @@ void DIALOG_PLOT_SCHEMATIC_HPGL::Plot_1_Page_HPGL( const wxString&  FileName,
     plotter->SetColor( BLACK );
 
     if( s_plot_Sheet_Ref )
-        m_Parent->PlotWorkSheet( plotter, screen, g_DrawDefaultLineThickness );
+        PlotWorkSheet( plotter, m_Parent->GetTitleBlock(),
+                       m_Parent->GetPageSettings(),
+                       screen->m_ScreenNumber, screen->m_NumberOfScreens,
+                       m_Parent->GetScreenDesc(),
+                       screen->GetFileName() );
 
     screen->Plot( plotter );
 

eeschema/dialogs/dialog_plot_schematic_PDF.cpp

@@ -298,8 +298,12 @@ void DIALOG_PLOT_SCHEMATIC_PDF::plotOneSheet( PDF_PLOTTER*   plotter,
 {
     if( m_plot_Sheet_Ref )
     {
-	plotter->SetColor( BLACK );
-	m_Parent->PlotWorkSheet( plotter, screen, g_DrawDefaultLineThickness );
+        plotter->SetColor( BLACK );
+        PlotWorkSheet( plotter, m_Parent->GetTitleBlock(),
+                       m_Parent->GetPageSettings(),
+                       screen->m_ScreenNumber, screen->m_NumberOfScreens,
+                       m_Parent->GetScreenDesc(),
+                       screen->GetFileName() );
     }
 
     screen->Plot( plotter );

eeschema/dialogs/dialog_plot_schematic_PS.cpp

@@ -294,7 +294,11 @@ void DIALOG_PLOT_SCHEMATIC_PS::plotOneSheetPS( const wxString&  FileName,
     if( m_plot_Sheet_Ref )
     {
         plotter->SetColor( BLACK );
-        m_Parent->PlotWorkSheet( plotter, screen, g_DrawDefaultLineThickness );
+        PlotWorkSheet( plotter, m_Parent->GetTitleBlock(),
+                       m_Parent->GetPageSettings(),
+                       screen->m_ScreenNumber, screen->m_NumberOfScreens,
+                       m_Parent->GetScreenDesc(),
+                       screen->GetFileName() );
     }
 
     screen->Plot( plotter );

eeschema/dialogs/dialog_print_using_printer.cpp

@@ -420,7 +420,8 @@ void SCH_PRINTOUT::DrawPage( SCH_SCREEN* aScreen )
     aScreen->Draw( panel, dc, GR_DEFAULT_DRAWMODE );
 
     if( printReference )
-        parent->TraceWorkSheet( dc, aScreen, g_DrawDefaultLineThickness, IU_PER_MILS );
+        parent->TraceWorkSheet( dc, aScreen, g_DrawDefaultLineThickness,
+                IU_PER_MILS, parent->GetScreenDesc() );
 
     g_DrawBgColor = bg_color;
     aScreen->m_IsPrinting = false;

eeschema/eeredraw.cpp

@@ -71,7 +71,8 @@ void SCH_EDIT_FRAME::RedrawActiveWindow( wxDC* DC, bool EraseBg )
 
     GetScreen()->Draw( m_canvas, DC, GR_DEFAULT_DRAWMODE );
 
-    TraceWorkSheet( DC, GetScreen(), g_DrawDefaultLineThickness, IU_PER_MILS );
+    TraceWorkSheet( DC, GetScreen(), g_DrawDefaultLineThickness, IU_PER_MILS,
+                    GetScreenDesc() );
 
 #ifdef USE_WX_OVERLAY
     if( IsShown() )

eeschema/schframe.cpp

@@ -861,7 +861,8 @@ void SCH_EDIT_FRAME::SVG_Print( wxCommandEvent& event )
 void SCH_EDIT_FRAME::PrintPage( wxDC* aDC, int aPrintMask, bool aPrintMirrorMode, void* aData )
 {
     GetScreen()->Draw( m_canvas, aDC, GR_DEFAULT_DRAWMODE );
-    TraceWorkSheet( aDC, GetScreen(), g_DrawDefaultLineThickness, IU_PER_MILS );
+    TraceWorkSheet( aDC, GetScreen(), g_DrawDefaultLineThickness, IU_PER_MILS,
+                    GetScreenDesc() );
 }
 
 

gerbview/draw_gerber_screen.cpp

@@ -105,7 +105,7 @@ void GERBVIEW_FRAME::RedrawActiveWindow( wxDC* DC, bool EraseBg )
     if( IsElementVisible( DCODES_VISIBLE ) )
         DrawItemsDCodeID( DC, GR_COPY );
 
-    TraceWorkSheet( DC, screen, 0, IU_PER_MILS );
+    TraceWorkSheet( DC, screen, 0, IU_PER_MILS, wxEmptyString );
 
     if( m_canvas->IsMouseCaptured() )
         m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );

gerbview/files.cpp

@@ -177,13 +177,13 @@ bool GERBVIEW_FRAME::LoadGerberFiles( const wxString& aFullFileName )
         if( !filename.IsAbsolute() )
             filename.SetPath( currentPath );
 
-        GetScreen()->SetFileName( filename.GetFullPath() );
+        m_lastFileName = filename.GetFullPath();
 
         setActiveLayer( layer, false );
 
         if( Read_GERBER_File( filename.GetFullPath(), filename.GetFullPath() ) )
         {
-            UpdateFileHistory( GetScreen()->GetFileName() );
+            UpdateFileHistory( m_lastFileName );
 
             layer = getNextAvailableLayer( layer );
 
@@ -258,7 +258,7 @@ bool GERBVIEW_FRAME::LoadExcellonFiles( const wxString& aFullFileName )
         if( !filename.IsAbsolute() )
             filename.SetPath( currentPath );
 
-        GetScreen()->SetFileName( filename.GetFullPath() );
+        m_lastFileName = filename.GetFullPath();
 
         setActiveLayer( layer, false );
 
@@ -301,7 +301,7 @@ bool GERBVIEW_FRAME::LoadDCodeFile( const wxString& aFullFileName )
     {
         wildcard = _( "Gerber DCODE files" );
         wildcard += wxT(" ") + AllFilesWildcard;
-        fn = GetScreen()->GetFileName();
+        fn = m_lastFileName;
         wxFileDialog dlg( this, _( "Load GERBER DCODE File" ),
                           fn.GetPath(), fn.GetFullName(), wildcard,
                           wxFD_OPEN | wxFD_FILE_MUST_EXIST );

gerbview/gerbview_frame.h

@@ -162,6 +162,8 @@ protected:
 
     // Auxiliary file history used to store drill files history.
     wxFileHistory           m_drillFileHistory;
+    /// The last filename chosen to be proposed to the user
+    wxString                m_lastFileName;
 public:
     GBR_LAYER_BOX_SELECTOR* m_SelLayerBox;
     DCODE_SELECTION_BOX*    m_DCodeSelector;    // a list box to select the dcode Id to highlight.

include/class_base_screen.h

@@ -76,7 +76,6 @@ class BASE_SCREEN : public EDA_ITEM
 {
 private:
     GRIDS       m_grids;          ///< List of valid grid sizes.
-    wxString    m_fileName;       ///< File used to load the screen.
     bool        m_FlagModified;   ///< Indicates current drawing has been modified.
     bool        m_FlagSave;       ///< Indicates automatic file save.
     EDA_ITEM*   m_CurrentItem;    ///< Currently selected object
@@ -153,10 +152,6 @@ public:
 
     void InitDataPoints( const wxSize& aPageSizeInternalUnits );
 
-    void SetFileName( const wxString& aFileName ) { m_fileName = aFileName; }
-
-    wxString GetFileName() const { return m_fileName; }
-
     /**
      * Function MilsToIuScalar
      * returns the scalar required to convert mils to internal units.

include/class_sch_screen.h

@@ -62,6 +62,9 @@ enum SCH_LINE_TEST_T
 
 class SCH_SCREEN : public BASE_SCREEN
 {
+private:
+    wxString    m_fileName;     ///< File used to load the screen.
+
     int         m_refCount;     ///< Number of sheets referencing this screen.
                                 ///< Delete when it goes to zero.
 
@@ -105,6 +108,10 @@ public:
     const PAGE_INFO& GetPageSettings() const                { return m_paper; }
     void SetPageSettings( const PAGE_INFO& aPageSettings )  { m_paper = aPageSettings; }
 
+    void SetFileName( const wxString& aFileName ) { m_fileName = aFileName; }
+
+    const wxString& GetFileName() const { return m_fileName; }
+
     const wxPoint& GetOriginAxisPosition() const            { return m_originAxisPosition; }
     void SetOriginAxisPosition( const wxPoint& aPosition )  { m_originAxisPosition = aPosition; }
 

include/plot_common.h

@@ -844,6 +844,13 @@ protected:
     int currentColor;
 };
 
+class TITLE_BLOCK;
+void PlotWorkSheet( PLOTTER* plotter, const TITLE_BLOCK& aTitleBlock,
+                    const PAGE_INFO& aPageInfo,
+                    int aSheetNumber, int aNumberOfSheets,
+                    const wxString &aSheetDesc,
+                    const wxString &aFilename );
+
 /** Returns the default plot extension for a format
   */
 wxString GetDefaultPlotExtension( PlotFormat aFormat );

include/wxBasePcbFrame.h

@@ -564,73 +564,6 @@ public:
      */
     void RecalculateAllTracksNetcode();
 
-    /* Plotting functions:
-     * Return true if OK, false if the file is not created (or has a problem)
-     */
-
-    /**
-     * Function ExportToGerberFile
-     * create one output files one per board layer in the RS274X format.
-     * <p>
-     * The units are in inches and in the format 3.4 with the leading zeros omitted.
-     * Coordinates are absolute value.  The 3.4 format is used because the native Pcbnew
-     * units are 1/10000 inch.
-     * </p>
-     */
-    bool ExportToGerberFile( const wxString& aFullFileName,
-                             int             aLayer,
-                             bool            aPlotOriginIsAuxAxis,
-                             EDA_DRAW_MODE_T aTraceMode );
-
-    bool ExportToHpglFile( const wxString& aFullFileName,
-                           int             aLayer,
-                           EDA_DRAW_MODE_T aTraceMode );
-
-    bool ExportToPostScriptFile( const wxString& aFullFileName,
-                                 int             aLayer,
-                                 bool            aUseA4,
-                                 EDA_DRAW_MODE_T aTraceMode );
-
-    bool ExportToDxfFile( const wxString& aFullFileName,
-                          int             aLayer,
-                          EDA_DRAW_MODE_T aTraceMode );
-
-    void Plot_Layer( PLOTTER*        plotter,
-                     int             Layer,
-                     EDA_DRAW_MODE_T trace_mode );
-
-    /**
-     * Function Plot_Standard_Layer
-     * plot copper or technical layers.
-     * not used for silk screen layers, because these layers have specific
-     * requirements, mainly for pads
-     * @param aPlotter = the plotter to use
-     * @param aLayerMask = the mask to define the layers to plot
-     * @param aPlotVia = true to plot vias, false to skip vias (has meaning
-     *                  only for solder mask layers).
-     * @param aPlotMode = the plot mode (files, sketch). Has meaning for some formats only
-     * @param aSkipNPTH_Pads = true to skip NPTH Pads, when the pad size and the pad hole
-     *                      have the same size. Used in GERBER format only.
-     */
-    void Plot_Standard_Layer( PLOTTER* aPlotter, int aLayerMask,
-                              bool aPlotVia, EDA_DRAW_MODE_T aPlotMode,
-                              bool aSkipNPTH_Pads = false );
-
-    void PlotSilkScreen( PLOTTER* plotter, int masque_layer, EDA_DRAW_MODE_T trace_mode );
-
-    /**
-     * Function PlotDrillMark
-     * Draw a drill mark for pads and vias.
-     * Must be called after all drawings, because it
-     * redraw the drill mark on a pad or via, as a negative (i.e. white) shape
-     * in FILLED plot mode
-     * @param aPlotter = the PLOTTER
-     * @param aTraceMode = the mode of plot (FILLED, SKETCH)
-     * @param aSmallDrillShape = true to plot a small drill shape, false to
-     *                           plot the actual drill shape
-     */
-    void PlotDrillMark( PLOTTER* aPlotter, EDA_DRAW_MODE_T aTraceMode, bool aSmallDrillShape );
-
     /* Functions relative to Undo/redo commands:
      */
 

include/wxstruct.h

@@ -662,7 +662,8 @@ public:
      */
     double GetZoom();
 
-    void TraceWorkSheet( wxDC* aDC, BASE_SCREEN* aScreen, int aLineWidth, double aScalar );
+    void TraceWorkSheet( wxDC* aDC, BASE_SCREEN* aScreen, int aLineWidth,
+                         double aScale, const wxString &aFilename );
 
     /**
      * Function TraceWorkSheet is a core function for drawing of the page layout with
@@ -686,8 +687,6 @@ public:
                          int aNScr, int aScr, int aLnW, double aScalar,
                          EDA_COLOR_T aClr1 = RED, EDA_COLOR_T aClr2 = RED );
 
-    void  PlotWorkSheet( PLOTTER* aPlotter, BASE_SCREEN* aScreen, int aLineWidth );
-
     /**
      * Function GetXYSheetReferences
      * returns the X,Y sheet references where the point position is located

pcbnew/CMakeLists.txt

@@ -187,10 +187,6 @@ set(PCBNEW_CLASS_SRCS
     pcbnew.cpp
     pcbnew_config.cpp
     pcbplot.cpp
-    plotgerb.cpp
-    plothpgl.cpp
-    plotps.cpp
-    plotdxf.cpp
     plot_rtn.cpp
     print_board_functions.cpp
     printout_controler.cpp

pcbnew/build_BOM_from_board.cpp

@@ -64,7 +64,7 @@ void PCB_EDIT_FRAME::RecreateBOMFileFromBoard( wxCommandEvent& aEvent )
     }
 
     /* Set the file extension: */
-    fn = GetScreen()->GetFileName();
+    fn = GetBoard()->GetFileName();
     fn.SetExt( CsvFileExtension );
 
     wxFileDialog dlg( this, _( "Save Bill of Materials" ), wxGetCwd(),

pcbnew/class_board.h

@@ -187,6 +187,9 @@ class BOARD : public BOARD_ITEM
     friend class PCB_EDIT_FRAME;
 
 private:
+    /// the board filename
+    wxString            m_fileName;
+
     // @todo: switch to boost:ptr_vector, and change ~BOARD()
     typedef std::vector<MARKER_PCB*> MARKERS;
 
@@ -237,6 +240,10 @@ private:
 
 public:
 
+    void SetFileName( const wxString& aFileName ) { m_fileName = aFileName; }
+
+    const wxString &GetFileName() const { return m_fileName; }
+
     /// Flags used in ratsnest calculation and update.
     int m_Status_Pcb;
 

pcbnew/dialogs/dialog_SVG_print.cpp

@@ -183,7 +183,7 @@ void DIALOG_SVG_PRINT::PrintSVGDoc( bool aPrintAll, bool aPrint_Frame_Ref )
         fn = m_FileNameCtrl->GetValue();
         if( !fn.IsOk() )
         {
-            fn = screen->GetFileName();
+            fn = m_Parent->GetBoard()->GetFileName();
         }
 
         if( aPrintAll )
@@ -271,7 +271,8 @@ bool DIALOG_SVG_PRINT::DrawPage( const wxString& FullFileName,
     g_DrawBgColor = WHITE;
 
     if( aPrint_Frame_Ref )
-        m_Parent->TraceWorkSheet( &dc, screen, s_Parameters.m_PenDefaultSize, IU_PER_MILS );
+        m_Parent->TraceWorkSheet( &dc, screen, s_Parameters.m_PenDefaultSize,
+                                  IU_PER_MILS, wxT( "" ) );
 
     m_Parent->PrintPage( &dc, m_PrintMaskLayer, false, &s_Parameters);
     g_DrawBgColor = bg_color;

pcbnew/dialogs/dialog_drc.cpp

@@ -293,7 +293,7 @@ void DIALOG_DRC_CONTROL::OnButtonBrowseRptFileClick( wxCommandEvent& event )
     wxString   wildcard( _( "DRC report files (.rpt)|*.rpt" ) );
     wxString   Ext( wxT( "rpt" ) );
 
-    fn = m_Parent->GetScreen()->GetFileName() + wxT( "-drc" );
+    fn = m_Parent->GetBoard()->GetFileName() + wxT( "-drc" );
     fn.SetExt( Ext );
 
     wxFileDialog dlg( this, _( "Save DRC Report File" ), wxEmptyString,
@@ -574,7 +574,7 @@ void DIALOG_DRC_CONTROL::writeReport( FILE* fp )
     int count;
 
     fprintf( fp, "** Drc report for %s **\n",
-             TO_UTF8( m_Parent->GetScreen()->GetFileName() ) );
+             TO_UTF8( m_Parent->GetBoard()->GetFileName() ) );
 
     wxDateTime now = wxDateTime::Now();
 

pcbnew/dialogs/dialog_netlist.cpp

@@ -14,6 +14,7 @@
 
 #include <pcbnew_config.h>
 #include <class_board_design_settings.h>
+#include <class_board.h>
 #include <wildcards_and_files_ext.h>
 
 #include <dialog_netlist.h>
@@ -28,7 +29,7 @@ void PCB_EDIT_FRAME::InstallNetlistFrame( wxDC* DC )
 
     if( !fn.FileExists() )
     {
-        fn = GetScreen()->GetFileName();
+        fn = GetBoard()->GetFileName();
         fn.SetExt( NetlistFileExtension );
         lastNetlistName = fn.GetFullPath();
     }
@@ -40,10 +41,10 @@ void PCB_EDIT_FRAME::InstallNetlistFrame( wxDC* DC )
     // Save project settings if needed.
     // Project settings are saved in the corresponding <board name>.pro file
     if( lastNetlistName != GetLastNetListRead() &&
-        !GetScreen()->GetFileName().IsEmpty() &&
+        !GetBoard()->GetFileName().IsEmpty() &&
         IsOK(NULL, _("Project config has changed. Save it ?") ) )
     {
-        wxFileName fn = GetScreen()->GetFileName();
+        wxFileName fn = GetBoard()->GetFileName();
         fn.SetExt( ProjectFileExtension );
         wxGetApp().WriteProjectConfig( fn.GetFullPath(), GROUP,
                                        GetProjectFileParameters() );

pcbnew/eagle_plugin.cpp

@@ -1101,6 +1101,10 @@ BOARD* EAGLE_PLUGIN::Load( const wxString& aFileName, BOARD* aAppendToMe,  PROPE
 
     m_board = aAppendToMe ? aAppendToMe : new BOARD();
 
+    // Give the filename to the board if it's new
+    if( !aAppendToMe )
+        m_board->SetFileName( aFileName );
+
     // delete on exception, iff I own m_board, according to aAppendToMe
     auto_ptr<BOARD> deleter( aAppendToMe ? NULL : m_board );
 

pcbnew/export_gencad.cpp

@@ -119,7 +119,7 @@ static double MapYTo( int aY )
 /* Driver function: processing starts here */
 void PCB_EDIT_FRAME::ExportToGenCAD( wxCommandEvent& aEvent )
 {
-    wxFileName fn = GetScreen()->GetFileName();
+    wxFileName fn = GetBoard()->GetFileName();
     wxString   msg, ext, wildcard;
     FILE*      file;
 
@@ -688,7 +688,7 @@ static void CreateSignalsSection( FILE* aFile, BOARD* aPcb )
 static bool CreateHeaderInfoData( FILE* aFile, PCB_EDIT_FRAME* aFrame )
 {
     wxString    msg;
-    PCB_SCREEN* screen = (PCB_SCREEN*) aFrame->GetScreen();
+    BOARD *board = aFrame->GetBoard();
 
     fputs( "$HEADER\n", aFile );
     fputs( "GENCAD 1.4\n", aFile );
@@ -699,7 +699,7 @@ static bool CreateHeaderInfoData( FILE* aFile, PCB_EDIT_FRAME* aFrame )
                GetChars( GetBuildVersion() ) );
     fputs( TO_UTF8( msg ), aFile );
 
-    msg = wxT( "DRAWING \"" ) + screen->GetFileName() + wxT( "\"\n" );
+    msg = wxT( "DRAWING \"" ) + board->GetFileName() + wxT( "\"\n" );
     fputs( TO_UTF8( msg ), aFile );
 
     const TITLE_BLOCK&  tb = aFrame->GetTitleBlock();

pcbnew/export_vrml.cpp

@@ -1197,7 +1197,7 @@ void PCB_EDIT_FRAME::OnExportVRML( wxCommandEvent& event )
 
     // Build default file name
     wxString ext = wxT( "wrl" );
-    fn = GetScreen()->GetFileName();
+    fn = GetBoard()->GetFileName();
     fn.SetExt( ext );
 
     DIALOG_EXPORT_3DFILE dlg( this );

pcbnew/files.cpp

@@ -85,7 +85,7 @@ void PCB_EDIT_FRAME::Files_io( wxCommandEvent& event )
     switch( id )
     {
     case ID_LOAD_FILE:
-        LoadOnePcbFile( GetScreen()->GetFileName(), false, true );
+        LoadOnePcbFile( GetBoard()->GetFileName(), false, true );
         break;
 
     case ID_MENU_READ_LAST_SAVED_VERSION_BOARD:
@@ -99,7 +99,7 @@ void PCB_EDIT_FRAME::Files_io( wxCommandEvent& event )
             }
             else
             {
-                fn = GetScreen()->GetFileName();
+                fn = GetBoard()->GetFileName();
                 fn.SetExt( pcbBackupFileExtension );
             }
 
@@ -119,7 +119,9 @@ void PCB_EDIT_FRAME::Files_io( wxCommandEvent& event )
 
             LoadOnePcbFile( fn.GetFullPath(), false );
             fn.SetExt( PcbFileExtension );
-            GetScreen()->SetFileName( fn.GetFullPath() );
+
+            // Re-set the name since extension changed
+            GetBoard()->SetFileName( fn.GetFullPath() );
             UpdateTitle();
         }
         break;
@@ -129,16 +131,20 @@ void PCB_EDIT_FRAME::Files_io( wxCommandEvent& event )
         break;
 
     case ID_NEW_BOARD:
-        Clear_Pcb( true );
-        GetScreen()->GetFileName().Printf( wxT( "%s%cnoname%s" ),
-                                           GetChars( wxGetCwd() ), DIR_SEP,
-                                           GetChars( PcbFileExtension ) );
-        UpdateTitle();
-        ReCreateLayerBox( NULL );
+        {
+            Clear_Pcb( true );
+            wxString newFilename;
+            newFilename.Printf( wxT( "%s%cnoname%s" ),
+                    GetChars( wxGetCwd() ), DIR_SEP,
+                    GetChars( PcbFileExtension ) );
+            GetBoard()->SetFileName( newFilename );
+            UpdateTitle();
+            ReCreateLayerBox( NULL );
+        }
         break;
 
     case ID_SAVE_BOARD:
-        SavePcbFile( GetScreen()->GetFileName() );
+        SavePcbFile( GetBoard()->GetFileName() );
         break;
 
     case ID_SAVE_BOARD_AS:
@@ -163,7 +169,7 @@ the changes?" ) ) )
 
     if( aAppend )
     {
-        GetScreen()->SetFileName( wxEmptyString );
+        GetBoard()->SetFileName( wxEmptyString );
         OnModify();
         GetBoard()->m_Status_Pcb = 0;
     }
@@ -235,7 +241,7 @@ the changes?" ) ) )
 
     CheckForAutoSaveFile( fileName, pcbBackupFileExtension );
 
-    GetScreen()->SetFileName( fileName.GetFullPath() );
+    GetBoard()->SetFileName( fileName.GetFullPath() );
 
     if( !aAppend )
     {
@@ -247,7 +253,7 @@ the changes?" ) ) )
         m_DisplayViaFill = DisplayOpt.DisplayViaFill;
 
         // load project settings before BOARD, in case BOARD file has overrides.
-        LoadProjectSettings( GetScreen()->GetFileName() );
+        LoadProjectSettings( GetBoard()->GetFileName() );
     }
     else
     {
@@ -264,7 +270,11 @@ the changes?" ) ) )
         props["page_height"] = wxString::Format( wxT( "%d" ), GetPageSizeIU().y );
 
         // load or append either:
-        loadedBoard = pi->Load( GetScreen()->GetFileName(), aAppend ? GetBoard() : NULL, &props );
+        loadedBoard = pi->Load( GetBoard()->GetFileName(), aAppend ? GetBoard() : NULL, &props );
+
+        // the Load plugin method makes a 'fresh' board, so we need to
+        // set its own name
+        GetBoard()->SetFileName( fileName.GetFullPath() );
 
         if( !aAppend )
         {
@@ -301,7 +311,7 @@ this file again." ) );
     // If append option: change the initial board name to <oldname>-append.brd
     if( aAppend )
     {
-        wxString new_filename = GetScreen()->GetFileName().BeforeLast( '.' );
+        wxString new_filename = GetBoard()->GetFileName().BeforeLast( '.' );
 
         if ( ! new_filename.EndsWith( wxT( "-append" ) ) )
             new_filename += wxT( "-append" );
@@ -309,13 +319,16 @@ this file again." ) );
         new_filename += wxT( "." ) + PcbFileExtension;
 
         OnModify();
-        GetScreen()->SetFileName( new_filename );
+        GetBoard()->SetFileName( new_filename );
     }
 
-    GetScreen()->GetFileName().Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
+    // Fix the directory separator on Windows
+    wxString fn( GetBoard()->GetFileName() );
+    fn.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
+    GetBoard()->SetFileName( fn );
 
     UpdateTitle();
-    UpdateFileHistory( GetScreen()->GetFileName() );
+    UpdateFileHistory( GetBoard()->GetFileName() );
 
     // Rebuild the new pad list (for drc and ratsnet control ...)
     GetBoard()->m_Status_Pcb = 0;
@@ -404,18 +417,18 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
 
     if( aFileName == wxEmptyString )
     {
-        wxFileDialog dlg( this, _( "Save Board File" ), wxEmptyString, GetScreen()->GetFileName(),
+        wxFileDialog dlg( this, _( "Save Board File" ), wxEmptyString, GetBoard()->GetFileName(),
                           wildcard, wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
 
         if( dlg.ShowModal() != wxID_OK )
             return false;
 
-        GetScreen()->SetFileName( dlg.GetPath() );
+        GetBoard()->SetFileName( dlg.GetPath() );
         wildcardIndex = dlg.GetFilterIndex();         // Legacy or s-expression file format.
     }
     else
     {
-        GetScreen()->SetFileName( aFileName );
+        GetBoard()->SetFileName( aFileName );
     }
 
     // If changes are made, update the board date
@@ -427,7 +440,7 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
         SetTitleBlock( tb );
     }
 
-    pcbFileName = GetScreen()->GetFileName();
+    pcbFileName = GetBoard()->GetFileName();
 
     if( pcbFileName.GetExt().IsEmpty() )
         pcbFileName.SetExt( IO_MGR::GetFileExtension( (IO_MGR::PCB_FILE_T) wildcardIndex ) );
@@ -500,7 +513,7 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
 
     if( saveok )
     {
-        GetScreen()->SetFileName( pcbFileName.GetFullPath() );
+        GetBoard()->SetFileName( pcbFileName.GetFullPath() );
         UpdateTitle();
     }
 
@@ -537,7 +550,7 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
 
 bool PCB_EDIT_FRAME::doAutoSave()
 {
-    wxFileName tmpFileName = GetScreen()->GetFileName();
+    wxFileName tmpFileName = GetBoard()->GetFileName();
     wxFileName fn = tmpFileName;
 
     // Auto save file name is the normal file name prepended with $.
@@ -549,13 +562,13 @@ bool PCB_EDIT_FRAME::doAutoSave()
     if( SavePcbFile( fn.GetFullPath(), NO_BACKUP_FILE ) )
     {
         GetScreen()->SetModify();
-        GetScreen()->SetFileName( tmpFileName.GetFullPath() );
+        GetBoard()->SetFileName( tmpFileName.GetFullPath() );
         UpdateTitle();
         m_autoSaveState = false;
         return true;
     }
 
-    GetScreen()->SetFileName( tmpFileName.GetFullPath() );
+    GetBoard()->SetFileName( tmpFileName.GetFullPath() );
 
     return false;
 }

pcbnew/gen_drill_report_files.cpp

@@ -180,7 +180,7 @@ void GenDrillMapFile( BOARD* aPcb, FILE* aFile, const wxString& aFullFileName,
 
     // Plot title  "Info"
     wxString Text = wxT( "Drill Map:" );
-    plotter->Text( wxPoint( plotX, plotY ), BLACK, Text, 0,
+    plotter->Text( wxPoint( plotX, plotY ), UNSPECIFIED, Text, 0,
                    wxSize( (int) ( charSize * charScale ),
                            (int) ( charSize * charScale ) ),
                    GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
@@ -232,7 +232,7 @@ void GenDrillMapFile( BOARD* aPcb, FILE* aFile, const wxString& aFullFileName,
                      aToolListBuffer[ii].m_OvalCount );
 
         msg += FROM_UTF8( line );
-        plotter->Text( wxPoint( plotX, y ), BLACK,
+        plotter->Text( wxPoint( plotX, y ), UNSPECIFIED,
                        msg,
                        0, wxSize( (int) ( charSize * charScale ), (int) ( charSize * charScale ) ),
                        GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,

pcbnew/gen_modules_placefile.cpp

@@ -161,7 +161,7 @@ void DIALOG_GEN_MODULE_POSITION::OnOutputDirectoryBrowseClicked( wxCommandEvent&
 
     if( dialog.ShowModal() == wxID_YES )
     {
-        wxString boardFilePath = ( (wxFileName) m_parent->GetScreen()->GetFileName()).GetPath();
+        wxString boardFilePath = ( (wxFileName) m_parent->GetBoard()->GetFileName()).GetPath();
 
         if( !dirName.MakeRelativeTo( boardFilePath ) )
             wxMessageBox( _( "Cannot make path relative (target volume different from board file volume)!" ),
@@ -193,7 +193,6 @@ void DIALOG_GEN_MODULE_POSITION::OnOKButton( wxCommandEvent& event )
 bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
 {
     BOARD * brd = m_parent->GetBoard();
-    PCB_SCREEN * screen = m_parent->GetScreen();
     wxFileName  fn;
     wxString    msg;
     wxString    frontLayerName;
@@ -201,7 +200,7 @@ bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
     bool singleFile = OneFileOnly();
     int fullcount = 0;
 
-    fn = screen->GetFileName();
+    fn = m_parent->GetBoard()->GetFileName();
     fn.SetPath( GetOutputDirectory() );
     frontLayerName = brd->GetLayerName( LAYER_N_FRONT );
     backLayerName = brd->GetLayerName( LAYER_N_BACK );
@@ -250,7 +249,7 @@ bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
     // Create the Back or Bottom side placement file
     fullcount = fpcount;
     side = 0;
-    fn = screen->GetFileName();
+    fn = brd->GetFileName();
     fn.SetPath( GetOutputDirectory() );
     fn.SetName( fn.GetName() + wxT( "-" ) + backLayerName );
     fn.SetExt( wxT( "pos" ) );
@@ -506,13 +505,13 @@ void PCB_EDIT_FRAME::GenFootprintsReport( wxCommandEvent& event )
 {
     wxFileName fn;
 
-    wxString boardFilePath = ( (wxFileName) GetScreen()->GetFileName()).GetPath();
+    wxString boardFilePath = ( (wxFileName) GetBoard()->GetFileName()).GetPath();
     wxDirDialog dirDialog( this, _( "Select Output Directory" ), boardFilePath );
 
     if( dirDialog.ShowModal() == wxID_CANCEL )
         return;
 
-    fn = GetScreen()->GetFileName();
+    fn = GetBoard()->GetFileName();
     fn.SetPath( dirDialog.GetPath() );
     fn.SetExt( wxT( "rpt" ) );
 

pcbnew/gendrill.cpp

@@ -129,7 +129,7 @@ void DIALOG_GENDRILL::GenDrillAndReportFiles()
 
         if( s_ToolListBuffer.size() > 0 ) //  holes?
         {
-            fn = m_parent->GetScreen()->GetFileName();
+            fn = m_parent->GetBoard()->GetFileName();
             layer_extend.Empty();
 
             if( gen_NPTH_holes )
@@ -240,7 +240,7 @@ void DIALOG_GENDRILL::GenDrillAndReportFiles()
 
     if( m_Choice_Drill_Report->GetSelection() > 0 )
     {
-        fn = m_parent->GetScreen()->GetFileName();
+        fn = m_parent->GetBoard()->GetFileName();
         GenDrillReport( fn.GetFullName() );
     }
 
@@ -693,7 +693,7 @@ void DIALOG_GENDRILL::GenDrillReport( const wxString aFileName )
     }
 
     GenDrillReportFile( report_dest, m_parent->GetBoard(),
-                        m_parent->GetScreen()->GetFileName(),
+                        m_parent->GetBoard()->GetFileName(),
                         m_UnitDrillIsInch,
                         s_HoleListBuffer,
                         s_ToolListBuffer );

pcbnew/initpcb.cpp

@@ -51,7 +51,7 @@ bool PCB_EDIT_FRAME::Clear_Pcb( bool aQuery )
     SetCurItem( NULL );
 
     // clear filename, to avoid overwriting an old file
-    GetScreen()->GetFileName().Empty();
+    GetBoard()->SetFileName( wxEmptyString );
 
     // preserve grid size accross call to InitDataPoints()
 
@@ -101,7 +101,7 @@ bool FOOTPRINT_EDIT_FRAME::Clear_Pcb( bool aQuery )
     GetBoard()->m_Modules.DeleteAll();
 
     // init pointeurs  et variables
-    GetScreen()->GetFileName().Empty();
+    GetBoard()->SetFileName( wxEmptyString );
 
     SetCurItem( NULL );
 

pcbnew/kicad_plugin.cpp

@@ -1204,5 +1204,11 @@ BOARD* PCB_IO::Load( const wxString& aFileName, BOARD* aAppendToMe, PROPERTIES*
 
     PCB_PARSER parser( new FILE_LINE_READER( file.fp(), aFileName ), aAppendToMe );
 
-    return (BOARD*) parser.Parse();
+    BOARD* board = dynamic_cast<BOARD*>( parser.Parse() );
+    wxASSERT( board );
+
+    // Give the filename to the board if it's new
+    if( !aAppendToMe )
+        board->SetFileName( aFileName );
+    return board;
 }

pcbnew/legacy_plugin.cpp

@@ -232,6 +232,10 @@ BOARD* LEGACY_PLUGIN::Load( const wxString& aFileName, BOARD* aAppendToMe, PROPE
 
     m_board = aAppendToMe ? aAppendToMe : new BOARD();
 
+    // Give the filename to the board if it's new
+    if( !aAppendToMe )
+        m_board->SetFileName( aFileName );
+
     // delete on exception, iff I own m_board, according to aAppendToMe
     auto_ptr<BOARD> deleter( aAppendToMe ? NULL : m_board );
 

pcbnew/pcb_plot_params.cpp

@@ -286,7 +286,6 @@ bool PCB_PLOT_PARAMS::SetLineWidth( int aValue )
     return setInt( &m_lineWidth, aValue, PLOT_LINEWIDTH_MIN, PLOT_LINEWIDTH_MAX );
 }
 
-
 // PCB_PLOT_PARAMS_PARSER
 
 PCB_PLOT_PARAMS_PARSER::PCB_PLOT_PARAMS_PARSER( LINE_READER* aReader ) :

pcbnew/pcbframe.cpp

@@ -482,7 +482,7 @@ void PCB_EDIT_FRAME::OnCloseWindow( wxCloseEvent& Event )
     {
         wxString msg;
         msg.Printf( _("Save the changes in\n<%s>\nbefore closing?"),
-                    GetChars( GetScreen()->GetFileName() ) );
+                    GetChars( GetBoard()->GetFileName() ) );
 
         int ii = DisplayExitDialog( this, msg );
         switch( ii )
@@ -496,13 +496,13 @@ void PCB_EDIT_FRAME::OnCloseWindow( wxCloseEvent& Event )
 
         case wxID_OK:
         case wxID_YES:
-            SavePcbFile( GetScreen()->GetFileName() );
+            SavePcbFile( GetBoard()->GetFileName() );
             break;
         }
     }
 
     // Delete the auto save file if it exists.
-    wxFileName fn = GetScreen()->GetFileName();
+    wxFileName fn = GetBoard()->GetFileName();
 
     // Auto save file name is the normal file name prefixed with a '$'.
     fn.SetName( wxT( "$" ) + fn.GetName() );
@@ -546,6 +546,7 @@ void PCB_EDIT_FRAME::Show3D_Frame( wxCommandEvent& event )
     }
 
     m_Draw3DFrame = new EDA_3D_FRAME( this, _( "3D Viewer" ) );
+    m_Draw3DFrame->SetDefaultFileName( GetBoard()->GetFileName() );
     m_Draw3DFrame->Show( true );
 }
 
@@ -726,7 +727,7 @@ void PCB_EDIT_FRAME::SetLanguage( wxCommandEvent& event )
 wxString PCB_EDIT_FRAME::GetLastNetListRead()
 {
     wxFileName absoluteFileName = m_lastNetListRead;
-    wxFileName pcbFileName = GetScreen()->GetFileName();
+    wxFileName pcbFileName = GetBoard()->GetFileName();
 
     if( !absoluteFileName.MakeAbsolute( pcbFileName.GetPath() ) || !absoluteFileName.FileExists() )
     {
@@ -741,7 +742,7 @@ wxString PCB_EDIT_FRAME::GetLastNetListRead()
 void PCB_EDIT_FRAME::SetLastNetListRead( const wxString& aLastNetListRead )
 {
     wxFileName relativeFileName = aLastNetListRead;
-    wxFileName pcbFileName = GetScreen()->GetFileName();
+    wxFileName pcbFileName = GetBoard()->GetFileName();
 
     if( relativeFileName.MakeRelativeTo( pcbFileName.GetPath() )
         && relativeFileName.GetFullPath() != aLastNetListRead )
@@ -771,7 +772,7 @@ void PCB_EDIT_FRAME::SVG_Print( wxCommandEvent& event )
 void PCB_EDIT_FRAME::UpdateTitle()
 {
     wxString title;
-    wxFileName fileName = GetScreen()->GetFileName();
+    wxFileName fileName = GetBoard()->GetFileName();
 
     if( fileName.IsOk() && fileName.FileExists() )
     {

pcbnew/pcbnew.cpp

@@ -182,14 +182,14 @@ Changing extension to .brd." ), GetChars( fn.GetFullPath() ) );
         else
         {   // File does not exists: prepare an empty board
             wxSetWorkingDirectory( fn.GetPath() );
-            frame->GetScreen()->SetFileName( fn.GetFullPath( wxPATH_UNIX ) );
+            frame->GetBoard()->SetFileName( fn.GetFullPath( wxPATH_UNIX ) );
             frame->UpdateTitle();
-            frame->UpdateFileHistory( frame->GetScreen()->GetFileName() );
+            frame->UpdateFileHistory( frame->GetBoard()->GetFileName() );
             frame->OnModify();          // Ready to save the new empty board
 
             wxString msg;
             msg.Printf( _( "File <%s> does not exist.\nThis is normal for a new project" ),
-                        GetChars( frame->GetScreen()->GetFileName() ) );
+                        GetChars( frame->GetBoard()->GetFileName() ) );
             wxMessageBox( msg );
         }
     }

pcbnew/pcbnew_config.cpp

@@ -105,7 +105,7 @@ void PCB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
 
     case ID_CONFIG_READ:
         {
-            fn = GetScreen()->GetFileName();
+            fn = GetBoard()->GetFileName();
             fn.SetExt( ProjectFileExtension );
 
             wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
@@ -204,7 +204,7 @@ void PCB_EDIT_FRAME::SaveProjectSettings()
 {
     wxFileName fn;
 
-    fn = GetScreen()->GetFileName();
+    fn = GetBoard()->GetFileName();
     fn.SetExt( ProjectFileExtension );
 
     wxFileDialog dlg( this, _( "Save Project File" ), fn.GetPath(), fn.GetFullName(),
@@ -391,7 +391,7 @@ void PCB_EDIT_FRAME::SaveMacros()
     wxXmlProperty *macrosProp, *hkProp, *xProp, *yProp;
     wxString str, hkStr, xStr, yStr;
 
-    fn = GetScreen()->GetFileName();
+    fn = GetBoard()->GetFileName();
     fn.SetExt( MacrosFileExtension );
 
     wxFileDialog dlg( this, _( "Save Macros File" ), fn.GetPath(), fn.GetFullName(),
@@ -437,7 +437,7 @@ void PCB_EDIT_FRAME::ReadMacros()
     wxString str;
     wxFileName fn;
 
-    fn = GetScreen()->GetFileName();
+    fn = GetBoard()->GetFileName();
     fn.SetExt( MacrosFileExtension );
 
     wxFileDialog dlg( this, _( "Read Macros File" ), fn.GetPath(),

pcbnew/pcbplot.h

@@ -56,6 +56,46 @@ void Plot_1_EdgeModule( PLOTTER* plotter, const PCB_PLOT_PARAMS& aPlotOpts, EDGE
 void PlotFilledAreas( PLOTTER* plotter, const PCB_PLOT_PARAMS& aPlotOpts, ZONE_CONTAINER* aZone,
                       EDA_DRAW_MODE_T trace_mode );
 
+PLOTTER *StartPlotBoard( BOARD *aBoard,
+                         PCB_PLOT_PARAMS *aPlotOpts,
+                         const wxString& aFullFileName,
+                         const wxString& aSheetDesc );
+
+void PlotBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, int Layer,
+                     const PCB_PLOT_PARAMS& plot_opts );
+
+/**
+    * Function Plot_Standard_Layer
+    * plot copper or technical layers.
+    * not used for silk screen layers, because these layers have specific
+    * requirements, mainly for pads
+    * @param aPlotter = the plotter to use
+    * @param aLayerMask = the mask to define the layers to plot
+    * @param aPlotVia = true to plot vias, false to skip vias (has meaning
+    *                  only for solder mask layers).
+    * @param aPlotMode = the plot mode (files, sketch). Has meaning for some formats only
+    * @param aSkipNPTH_Pads = true to skip NPTH Pads, when the pad size and the pad hole
+    *                      have the same size. Used in GERBER format only.
+    */
+void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask,
+                        const PCB_PLOT_PARAMS& plot_opts,
+                        bool aPlotVia, bool aSkipNPTH_Pads );
+
+void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask,
+                     const PCB_PLOT_PARAMS&  plot_opts );
+
+/**
+    * Function PlotDrillMarks
+    * Draw a drill mark for pads and vias.
+    * Must be called after all drawings, because it
+    * redraw the drill mark on a pad or via, as a negative (i.e. white) shape
+    * in FILLED plot mode
+    * @param aPlotter = the PLOTTER
+    * @param aPlotOpts = plot options
+    */
+void PlotDrillMarks( BOARD *aBoard, PLOTTER* aPlotter, const PCB_PLOT_PARAMS& aPlotOpts );
+
+
 // PLOTGERB.CPP
 void SelectD_CODE_For_LineDraw( PLOTTER* plotter, int aSize );
 

pcbnew/plotcontroller.h

+/**
+ * @file pcbnew/pcbplot.h
+ */
+
+#ifndef PLOTCONTROLLER_H_
+#define PLOTCONTROLLER_H_
+
+#include <pcb_plot_params.h>
+#include <layers_id_colors_and_visibility.h>
+
+class PLOTTER;
+class BOARD;
+
+/** 
+ * Batch plotter state object. Keeps the plot options and handles multiple
+ * plot requests
+ */
+class PLOT_CONTROLLER
+{
+public:
+    PLOT_CONTROLLER( BOARD *aBoard );
+    ~PLOT_CONTROLLER();
+    PCB_PLOT_PARAMS *AccessPlotOpts() { return &m_plotOpts; }
+    bool IsPlotOpen() const { return m_plotter != NULL; }
+    void ClosePlot();
+    bool OpenPlotfile( const wxString &aSuffix, PlotFormat aFormat,
+                       const wxString &aSheetDesc );
+    bool PlotLayer( int layer );
+
+private:
+    /// Option bank
+    PCB_PLOT_PARAMS m_plotOpts;
+    
+    /// This is the plotter object; it starts NULL and become instantiated
+    // when a plotfile is requested
+    PLOTTER *m_plotter;
+
+    /// The board we're plotting
+    BOARD* m_board;
+};
+
+#endif
+

pcbnew/plotdxf.cpp

-/**
- * @file plotdxf.cpp
- * @brief Plot DXF.
- */
-
-#include <fctsys.h>
-#include <common.h>
-#include <plot_common.h>
-#include <confirm.h>
-#include <trigo.h>
-#include <wxBasePcbFrame.h>
-
-#include <pcbnew.h>
-#include <protos.h>
-#include <pcbplot.h>
-
-
-bool PCB_BASE_FRAME::ExportToDxfFile( const wxString& aFullFileName, int aLayer,
-                                      EDA_DRAW_MODE_T aTraceMode )
-{
-    LOCALE_IO   toggle;
-
-    const PCB_PLOT_PARAMS& plot_opts = GetPlotSettings();
-
-    FILE* output_file = wxFopen( aFullFileName, wxT( "wt" ) );
-
-    if( output_file == NULL )
-    {
-        return false;
-    }
-
-    DXF_PLOTTER* plotter = new DXF_PLOTTER();
-    plotter->SetPageSettings( GetPageSettings() );
-    plotter->SetViewport( wxPoint( 0, 0 ), IU_PER_DECIMILS, 1, 0 );
-    plotter->SetCreator( wxT( "PCBNEW-DXF" ) );
-    plotter->SetFilename( aFullFileName );
-    plotter->StartPlot( output_file );
-
-    if( plot_opts.GetPlotFrameRef() )
-        PlotWorkSheet( plotter, GetScreen(), plot_opts.GetLineWidth() );
-
-    Plot_Layer( plotter, aLayer, aTraceMode );
-    plotter->EndPlot();
-    delete plotter;
-    return true;
-}

pcbnew/plotgerb.cpp

-/**
- * @file plotgerb.cpp
- * @brief Functions to plot a board in GERBER RS274X format.
- */
-
-/* Creates the output files, one per board layer:
- * filenames are like xxxc.PHO and use the RS274X format
- * Units = inches
- * format 3.4, Leading zero omitted, Abs format
- * format 3.4 uses the native Pcbnew units (1/10000 inch).
- */
-
-#include <fctsys.h>
-#include <common.h>
-#include <plot_common.h>
-#include <confirm.h>
-#include <pcbplot.h>
-#include <trigo.h>
-#include <wxBasePcbFrame.h>
-#include <layers_id_colors_and_visibility.h>
-
-#include <pcbnew.h>
-#include <protos.h>
-
-
-bool PCB_BASE_FRAME::ExportToGerberFile( const wxString& aFullFileName, int aLayer,
-                                         bool aPlotOriginIsAuxAxis, EDA_DRAW_MODE_T aTraceMode )
-{
-    FILE* output_file = wxFopen( aFullFileName, wxT( "wt" ) );
-    if( output_file == NULL )
-    {
-        return false;
-    }
-
-    PCB_PLOT_PARAMS plot_opts = GetPlotSettings();
-
-    wxPoint offset;
-
-    // Calculate scaling from Pcbnew units (in 0.1 mil or 0.0001 inch) to gerber units
-    double scale = plot_opts.GetScale();
-
-    if( aPlotOriginIsAuxAxis )
-    {
-        offset = GetOriginAxisPosition();
-    }
-    else
-    {
-        offset.x = 0;
-        offset.y = 0;
-    }
-
-    LOCALE_IO   toggle;
-
-    PLOTTER* plotter = new GERBER_PLOTTER();
-
-    // No mirror and scaling for gerbers!
-    plotter->SetViewport( offset, IU_PER_DECIMILS, scale, 0 );
-    plotter->SetDefaultLineWidth( plot_opts.GetLineWidth() );
-    plotter->SetCreator( wxT( "PCBNEW-RS274X" ) );
-    plotter->SetFilename( aFullFileName );
-
-    if( plotter->StartPlot( output_file ) )
-    {
-        SetPlotSettings( plot_opts );
-
-        // Sheet refs on gerber CAN be useful... and they're always 1:1
-        if( plot_opts.GetPlotFrameRef() )
-            PlotWorkSheet( plotter, GetScreen(), plot_opts.GetLineWidth() );
-
-        Plot_Layer( plotter, aLayer, aTraceMode );
-
-        plotter->EndPlot();
-
-        SetPlotSettings( plot_opts );
-    }
-    else    // error in start_plot( ): failed opening a temporary file
-    {
-        wxMessageBox( _("Error when creating %s file: unable to create a temporary file"));
-    }
-
-    delete plotter;
-
-    return true;
-}

pcbnew/plothpgl.cpp

-/**
- * @file plothpgl.cpp
- */
-
-/*
- * This program source code file is part of KiCad, a free EDA CAD application.
- *
- * Copyright (C) 2012 KiCad Developers, see change_log.txt for contributors.
- * Copyright (C) 2012 Dick Hollenbeck, dick@softplc.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, you may find one here:
- * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
- * or you may search the http://www.gnu.org website for the version 2 license,
- * or you may write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
- */
-
-
-#include <fctsys.h>
-#include <common.h>
-#include <plot_common.h>
-#include <wxBasePcbFrame.h>
-#include <class_board.h>
-#include <pcbnew.h>
-#include <pcbplot.h>
-#include <convert_to_biu.h>
-
-
-bool PCB_BASE_FRAME::ExportToHpglFile( const wxString& aFullFileName, int aLayer,
-                                       EDA_DRAW_MODE_T aTraceMode )
-{
-    wxSize      boardSize;
-    wxPoint     boardCenter;
-    bool        center = false;
-    double      scale;
-    wxPoint     offset;
-    LOCALE_IO   toggle;
-    FILE*       output_file = wxFopen( aFullFileName, wxT( "wt" ) );
-
-    if( output_file == NULL )
-    {
-        return false;
-    }
-
-    PCB_PLOT_PARAMS plot_opts = GetPlotSettings();
-
-    // Compute pen_dim (from m_HPGLPenDiam in mils) in pcb units,
-    // with plot scale (if Scale is 2, pen diameter value is always m_HPGLPenDiam
-    // so apparent pen diam is real pen diam / Scale
-    int pen_diam = KiROUND( plot_opts.GetHPGLPenDiameter() * IU_PER_MILS /
-                            plot_opts.GetScale() );
-
-    // compute pen_overlay (from m_HPGLPenOvr in mils) in pcb units
-    // with plot scale
-    if( plot_opts.GetHPGLPenOverlay() < 1 )
-        plot_opts.SetHPGLPenOverlay( 0 );
-
-    if( plot_opts.GetHPGLPenOverlay() >= plot_opts.GetHPGLPenDiameter() )
-        plot_opts.SetHPGLPenOverlay( plot_opts.GetHPGLPenDiameter() - 1 );
-
-    int pen_overlay = KiROUND( plot_opts.GetHPGLPenOverlay() * IU_PER_MILS /
-                               plot_opts.GetScale() );
-
-
-    if( plot_opts.GetScale() != 1.0 || plot_opts.GetAutoScale() )
-    {
-        // when scale != 1.0 we must calculate the position in page
-        // because actual position has no meaning
-        center = true;
-    }
-
-    wxSize pageSizeIU = GetPageSizeIU();
-
-    // Calculate the center of the PCB
-    EDA_RECT bbbox = GetBoardBoundingBox();
-
-    boardSize   = bbbox.GetSize();
-    boardCenter = bbbox.Centre();
-
-    if( plot_opts.GetAutoScale() )       // Optimum scale
-    {
-        // Fit to 80% of the page
-        double Xscale = ( ( pageSizeIU.x * 0.8 ) / boardSize.x );
-        double Yscale = ( ( pageSizeIU.y * 0.8 ) / boardSize.y );
-        scale  = std::min( Xscale, Yscale );
-    }
-    else
-    {
-        scale = plot_opts.GetScale();
-    }
-
-    // Calculate the page size offset.
-    if( center )
-    {
-        offset.x = KiROUND( (double) boardCenter.x -
-                            ( (double) pageSizeIU.x / 2.0 ) / scale );
-        offset.y = KiROUND( (double) boardCenter.y -
-                            ( (double) pageSizeIU.y / 2.0 ) / scale );
-    }
-    else
-    {
-        offset.x = 0;
-        offset.y = 0;
-    }
-
-    HPGL_PLOTTER* plotter = new HPGL_PLOTTER();
-
-    plotter->SetPageSettings( GetPageSettings() );
-
-    // why did we have to change these settings above?
-    SetPlotSettings( plot_opts );
-
-    plotter->SetViewport( offset, IU_PER_DECIMILS, scale,
-	                  plot_opts.GetMirror() );
-    plotter->SetDefaultLineWidth( plot_opts.GetLineWidth() );
-    plotter->SetCreator( wxT( "PCBNEW-HPGL" ) );
-    plotter->SetFilename( aFullFileName );
-    plotter->SetPenSpeed( plot_opts.GetHPGLPenSpeed() );
-    plotter->SetPenNumber( plot_opts.GetHPGLPenNum() );
-    plotter->SetPenOverlap( pen_overlay );
-    plotter->SetPenDiameter( pen_diam );
-    plotter->StartPlot( output_file );
-
-    // The worksheet is not significant with scale!=1... It is with paperscale!=1, anyway
-    if( plot_opts.GetPlotFrameRef() && !center )
-        PlotWorkSheet( plotter, GetScreen(), plot_opts.GetLineWidth() );
-
-    Plot_Layer( plotter, aLayer, aTraceMode );
-    plotter->EndPlot();
-    delete plotter;
-
-    return true;
-}

pcbnew/plotps.cpp

-/**
- * @file plotps.cpp
- * @brief Plot Postscript.
- */
-
-#include <fctsys.h>
-#include <common.h>
-#include <plot_common.h>
-#include <confirm.h>
-#include <trigo.h>
-#include <wxBasePcbFrame.h>
-#include <macros.h>
-
-#include <class_board.h>
-
-#include <pcbnew.h>
-#include <protos.h>
-#include <pcbplot.h>
-
-
-/* Generate a PostScript file (*. ps) of the circuit layer.
- * If layer < 0: all layers are plotted.
- */
-bool PCB_BASE_FRAME::ExportToPostScriptFile( const wxString& aFullFileName, int aLayer,
-                                             bool aUseA4, EDA_DRAW_MODE_T aTraceMode )
-{
-    const PAGE_INFO&    pageInfo = GetPageSettings();
-    PCB_PLOT_PARAMS     plotOpts = GetPlotSettings();
-
-    wxSize      paperSizeIU;
-    wxSize      boardSize;
-    wxPoint     boardCenter;
-    bool        center = false;
-    double      scale;
-    double      paperscale;
-    wxPoint     offset;
-    LOCALE_IO   toggle;
-    PAGE_INFO   pageA4( wxT( "A4" ) );
-
-    const PAGE_INFO*  sheetPS;
-
-    FILE* output_file = wxFopen( aFullFileName, wxT( "wt" ) );
-
-    if( output_file == NULL )
-    {
-        return false;
-    }
-
-    if( plotOpts.GetScale() != 1.0 || plotOpts.GetAutoScale() )
-    {
-        // when scale != 1.0 we must calculate the position in page
-        // because actual position has no meaning
-        center = true;
-    }
-
-    // Set default line width
-    if( plotOpts.GetLineWidth() < 1 )
-        plotOpts.SetLineWidth( 1 );
-
-    wxSize pageSizeIU = GetPageSizeIU();
-
-    if( aUseA4 )
-    {
-        sheetPS     = &pageA4;
-        paperSizeIU = pageA4.GetSizeIU();
-        paperscale  = (double) paperSizeIU.x / pageSizeIU.x;
-    }
-    else
-    {
-        sheetPS     = &pageInfo;
-        paperSizeIU = pageSizeIU;
-        paperscale = 1;
-    }
-
-    EDA_RECT bbbox = GetBoardBoundingBox();
-
-    boardSize   = bbbox.GetSize();
-    boardCenter = bbbox.Centre();
-
-    if( plotOpts.GetAutoScale() )       // Optimum scale
-    {
-        // Fit to 80% of the page
-        double Xscale = (paperSizeIU.x * 0.8) / boardSize.x;
-        double Yscale = (paperSizeIU.y * 0.8) / boardSize.y;
-
-        scale  = MIN( Xscale, Yscale );
-    }
-    else
-    {
-        scale = plotOpts.GetScale() * paperscale;
-    }
-
-    if( center )
-    {
-        offset.x = KiROUND( (double) boardCenter.x - ( (double) paperSizeIU.x / 2.0 ) / scale );
-        offset.y = KiROUND( (double) boardCenter.y - ( (double) paperSizeIU.y / 2.0 ) / scale );
-    }
-    else
-    {
-        offset.x = 0;
-        offset.y = 0;
-    }
-
-    PS_PLOTTER* plotter = new PS_PLOTTER();
-
-    plotter->SetPageSettings( *sheetPS );
-
-    // why did we have to change these settings?
-    SetPlotSettings( plotOpts );
-
-    plotter->SetScaleAdjust( plotOpts.GetFineScaleAdjustX(),
-                               plotOpts.GetFineScaleAdjustY() );
-    plotter->SetPlotWidthAdj( plotOpts.GetWidthAdjust() );
-    plotter->SetViewport( offset, IU_PER_DECIMILS, scale,
-	                  plotOpts.GetMirror() );
-    plotter->SetDefaultLineWidth( plotOpts.GetLineWidth() );
-    plotter->SetCreator( wxT( "PCBNEW-PS" ) );
-    plotter->SetFilename( aFullFileName );
-    plotter->StartPlot( output_file );
-
-    /* The worksheet is not significant with scale!=1... It is with paperscale!=1, anyway */
-    if( plotOpts.GetPlotFrameRef() && !center )
-        PlotWorkSheet( plotter, GetScreen(), plotOpts.GetLineWidth() );
-
-    // If plot a negative board:
-    // Draw a black rectangle (background for plot board in white)
-    // and switch the current color to WHITE
-    if( plotOpts.GetNegative() )
-    {
-        int margin = 500;              // Add a 0.5 inch margin around the board
-        plotter->SetNegative( true );
-        plotter->SetColor( WHITE );   // Which will be plotted as black
-        plotter->Rect( wxPoint( bbbox.GetX() - margin,
-                                bbbox.GetY() - margin ),
-                       wxPoint( bbbox.GetRight() + margin,
-                                bbbox.GetBottom() + margin ),
-                       FILLED_SHAPE );
-        plotter->SetColor( BLACK );
-    }
-
-    Plot_Layer( plotter, aLayer, aTraceMode );
-    plotter->EndPlot();
-    delete plotter;
-
-    return true;
-}

pcbnew/printout_controler.cpp

@@ -285,7 +285,7 @@ void BOARD_PRINTOUT_CONTROLER::DrawPage()
 
     if( m_PrintParams.m_Print_Sheet_Ref )
         m_Parent->TraceWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
-                                  IU_PER_MILS );
+                                  IU_PER_MILS, m_Parent->GetScreenDesc() );
 
     if( printMirror )
     {

pcbnew/scripting/pcbnew.i

@@ -95,7 +95,10 @@
   #include <class_netclass.h>
   #include <class_netinfo.h>
   #include <pcbnew_scripting_helpers.h>
-  
+
+  #include <plotcontroller.h>
+  #include <pcb_plot_params.h>
+  #include <colors.h>
       
   BOARD *GetBoard(); /* get current editor board */
 %}
@@ -127,6 +130,11 @@
 %include <class_netclass.h>
 %include <class_netinfo.h>
 
+%include <plotcontroller.h>
+%include <pcb_plot_params.h>
+%include <plot_common.h>
+%include <colors.h>
+
 %include "board_item.i"
 
 %include <pcbnew_scripting_helpers.h>

pcbnew/specctra_export.cpp

@@ -72,7 +72,7 @@ static const double  safetyMargin = 0.1;
 // see wxPcbStruct.h
 void PCB_EDIT_FRAME::ExportToSpecctra( wxCommandEvent& event )
 {
-    wxString        fullFileName = GetScreen()->GetFileName();
+    wxString        fullFileName = GetBoard()->GetFileName();
     wxString        path;
     wxString        name;
     wxString        ext;

pcbnew/specctra_import.cpp

@@ -69,7 +69,7 @@ void PCB_EDIT_FRAME::ImportSpecctraSession( wxCommandEvent& event )
     }
 */
 
-    wxString fullFileName = GetScreen()->GetFileName();
+    wxString fullFileName = GetBoard()->GetFileName();
     wxString path;
     wxString name;
     wxString ext;

pcbnew/tracepcb.cpp

@@ -68,7 +68,7 @@ void FOOTPRINT_EDIT_FRAME::RedrawActiveWindow( wxDC* DC, bool EraseBg )
     GRSetDrawMode( DC, GR_COPY );
 
     m_canvas->DrawBackGround( DC );
-    TraceWorkSheet( DC, screen, 0, IU_PER_MILS );
+    TraceWorkSheet( DC, screen, 0, IU_PER_MILS, wxEmptyString );
 
     // Redraw the footprints
     for( MODULE* module = GetBoard()->m_Modules;  module;  module = module->Next() )
@@ -106,7 +106,8 @@ void PCB_EDIT_FRAME::RedrawActiveWindow( wxDC* DC, bool EraseBg )
 
     m_canvas->DrawBackGround( DC );
 
-    TraceWorkSheet( DC, GetScreen(), g_DrawDefaultLineThickness, IU_PER_MILS );
+    TraceWorkSheet( DC, GetScreen(), g_DrawDefaultLineThickness,
+                    IU_PER_MILS, wxEmptyString );
 
     GetBoard()->Draw( m_canvas, DC, GR_OR | GR_ALLOW_HIGHCONTRAST);
 

pcbnew/xchgmod.cpp

@@ -183,7 +183,7 @@ int DIALOG_EXCHANGE_MODULE::Maj_ListeCmp( const wxString& reference,
         return 0;
 
     /* Build CMP file name by changing the extension of NetList filename */
-    fn = m_Parent->GetScreen()->GetFileName();
+    fn = m_Parent->GetBoard()->GetFileName();
     fn.SetExt( ComponentFileExtension );
 
     FichCmp = wxFopen( fn.GetFullPath(), wxT( "rt" ) );
@@ -621,7 +621,7 @@ void PCB_EDIT_FRAME::RecreateCmpFileFromBoard( wxCommandEvent& aEvent )
     }
 
     /* Calculation file name by changing the extension name to NetList */
-    fn = GetScreen()->GetFileName();
+    fn = GetBoard()->GetFileName();
     fn.SetExt( ComponentFileExtension );
     wildcard = wxGetTranslation( ComponentFileWildcard );