Commit 9c16a218 authored by Wayne Stambaugh's avatar Wayne Stambaugh

Pcbnew s-expression file format changes.

* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
  enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
parent 6976d253
...@@ -20,6 +20,9 @@ set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMakeModules) ...@@ -20,6 +20,9 @@ set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMakeModules)
# reports. # reports.
# #
option(USE_PCBNEW_SEXPR_FILE_FORMAT
"Use s-expression Pcbnew file format support (default OFF)." )
option(USE_NEW_PCBNEW_LOAD "use new plugin support for legacy file format" ON) option(USE_NEW_PCBNEW_LOAD "use new plugin support for legacy file format" ON)
option(USE_NEW_PCBNEW_SAVE "use new plugin support for legacy file format" ON) option(USE_NEW_PCBNEW_SAVE "use new plugin support for legacy file format" ON)
option(USE_PCBNEW_NANOMETRES option(USE_PCBNEW_NANOMETRES
...@@ -68,7 +71,12 @@ else (KICAD_STABLE_VERSION ) ...@@ -68,7 +71,12 @@ else (KICAD_STABLE_VERSION )
endif(KICAD_TESTING_VERSION ) endif(KICAD_TESTING_VERSION )
endif(KICAD_STABLE_VERSION ) endif(KICAD_STABLE_VERSION )
# Nanometers must be enabled when USE_PCBNEW_SEXPR_FILE_FORMAT=ON.
if( USE_PCBNEW_SEXPR_FILE_FORMAT AND NOT USE_PCBNEW_NANOMETRES )
set( TMP "The Pcbnew s-expression file format requires nano-meter internal units to be " )
set( TMP "${TMP} enabled using -DUSE_PCBNEW_NANOMETRES=ON." )
message( FATAL_ERROR ${TMP} )
endif( USE_PCBNEW_SEXPR_FILE_FORMAT AND NOT USE_PCBNEW_NANOMETRES )
#================================================ #================================================
# Set flags for GCC. # Set flags for GCC.
......
...@@ -57,13 +57,14 @@ ...@@ -57,13 +57,14 @@
#cmakedefine USE_NEW_PCBNEW_LOAD #cmakedefine USE_NEW_PCBNEW_LOAD
#cmakedefine USE_NEW_PCBNEW_SAVE #cmakedefine USE_NEW_PCBNEW_SAVE
#cmakedefine USE_PCBNEW_NANAMETERS #cmakedefine USE_PCBNEW_NANOMETRES
#cmakedefine USE_PCBNEW_SEXPR_FILE_FORMAT
/// The file format revision of the *.brd file created by this build /// The legacy file format revision of the *.brd file created by this build
#if defined(KICAD_NANOMETRE) #if defined(USE_PCBNEW_NANOMETRES)
#define BOARD_FILE_VERSION 2 #define LEGACY_BOARD_FILE_VERSION 2
#else #else
#define BOARD_FILE_VERSION 1 #define LEGACY_BOARD_FILE_VERSION 1
#endif #endif
#endif // CONFIG_H_ #endif // CONFIG_H_
...@@ -118,8 +118,14 @@ set(PCB_COMMON_SRCS ...@@ -118,8 +118,14 @@ set(PCB_COMMON_SRCS
dialogs/dialog_page_settings.cpp dialogs/dialog_page_settings.cpp
) )
if ( USE_NEW_PCBNEW_LOAD OR USE_NEW_PCBNEW_SAVE ) if( USE_NEW_PCBNEW_LOAD OR USE_NEW_PCBNEW_SAVE )
set( PCB_COMMON_SRCS ${PCB_COMMON_SRCS} ../pcbnew/item_io.cpp ../pcbnew/io_mgr.cpp ../pcbnew/kicad_plugin.cpp ) set( PCB_COMMON_SRCS
${PCB_COMMON_SRCS}
../pcbnew/item_io.cpp
../pcbnew/io_mgr.cpp
../pcbnew/legacy_plugin.cpp
../pcbnew/kicad_plugin.cpp
)
else() else()
set( PCB_COMMON_SRCS ${PCB_COMMON_SRCS} ../pcbnew/item_io.cpp ) set( PCB_COMMON_SRCS ${PCB_COMMON_SRCS} ../pcbnew/item_io.cpp )
endif() endif()
......
...@@ -574,12 +574,12 @@ void EDA_TEXT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControl ...@@ -574,12 +574,12 @@ void EDA_TEXT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControl
throw( IO_ERROR ) throw( IO_ERROR )
{ {
aFormatter->Print( aNestLevel, "(text %s (at %s", aFormatter->Print( aNestLevel, "(text %s (at %s",
EscapedUTF8( m_Text ).c_str(), FormatBIU( m_Pos ).c_str() ); aFormatter->Quotew( m_Text ).c_str(), FormatBIU( m_Pos ).c_str() );
if( m_Orient != 0.0 ) if( m_Orient != 0.0 )
aFormatter->Print( aNestLevel, "%0.1f", m_Orient ); aFormatter->Print( 0, " %0.1f", m_Orient );
aFormatter->Print( aNestLevel, ")\n" ); aFormatter->Print( 0, ")\n" );
if( !IsDefaultFormatting() ) if( !IsDefaultFormatting() )
{ {
...@@ -593,15 +593,15 @@ void EDA_TEXT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControl ...@@ -593,15 +593,15 @@ void EDA_TEXT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControl
// Add font support here at some point in the future. // Add font support here at some point in the future.
if( ( m_Size.x != DEFAULT_SIZE_TEXT ) || ( m_Size.y != DEFAULT_SIZE_TEXT ) ) if( ( m_Size.x != DEFAULT_SIZE_TEXT ) || ( m_Size.y != DEFAULT_SIZE_TEXT ) )
aFormatter->Print( aNestLevel+2, " (size %s)", FormatBIU( m_Size ).c_str() ); aFormatter->Print( 0, " (size %s)", FormatBIU( m_Size ).c_str() );
if( m_Bold ) if( m_Bold )
aFormatter->Print( aNestLevel+2, " bold" ); aFormatter->Print( 0, " bold" );
if( m_Bold ) if( m_Bold )
aFormatter->Print( aNestLevel+2, " italic" ); aFormatter->Print( 0, " italic" );
aFormatter->Print( aNestLevel+1, ")\n"); aFormatter->Print( 0, ")\n");
} }
if( m_Mirror || ( m_HJustify != GR_TEXT_HJUSTIFY_CENTER ) if( m_Mirror || ( m_HJustify != GR_TEXT_HJUSTIFY_CENTER )
...@@ -610,24 +610,22 @@ void EDA_TEXT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControl ...@@ -610,24 +610,22 @@ void EDA_TEXT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControl
aFormatter->Print( aNestLevel+2, "(justify"); aFormatter->Print( aNestLevel+2, "(justify");
if( m_HJustify != GR_TEXT_HJUSTIFY_CENTER ) if( m_HJustify != GR_TEXT_HJUSTIFY_CENTER )
aFormatter->Print( aNestLevel+2, aFormatter->Print( 0, (m_HJustify == GR_TEXT_HJUSTIFY_LEFT) ? " left" : " right" );
(m_HJustify == GR_TEXT_HJUSTIFY_LEFT) ? " left" : " right" );
if( m_VJustify != GR_TEXT_VJUSTIFY_CENTER ) if( m_VJustify != GR_TEXT_VJUSTIFY_CENTER )
aFormatter->Print( aNestLevel+2, aFormatter->Print( 0, (m_VJustify == GR_TEXT_VJUSTIFY_TOP) ? " top" : " bottom" );
(m_VJustify == GR_TEXT_VJUSTIFY_TOP) ? " top" : " bottom" );
if( m_Mirror ) if( m_Mirror )
aFormatter->Print( aNestLevel+2, " mirror" ); aFormatter->Print( 0, " mirror" );
aFormatter->Print( aNestLevel+2, ")\n" ); aFormatter->Print( 0, ")\n" );
} }
// As of now the only place this is used is in Eeschema to hide or show the text. // As of now the only place this is used is in Eeschema to hide or show the text.
if( m_Attributs ) if( m_Attributs )
aFormatter->Print( aNestLevel+2, "hide" ); aFormatter->Print( aNestLevel+2, "hide\n" );
aFormatter->Print( aNestLevel+1, "\n)\n" ); aFormatter->Print( aNestLevel+1, ")\n" );
} }
aFormatter->Print( aNestLevel, ")\n" ); aFormatter->Print( aNestLevel, ")\n" );
......
...@@ -54,7 +54,8 @@ const wxString ProjectFileWildcard( _( "KiCad project files (*.pro)|*.pro" ) ); ...@@ -54,7 +54,8 @@ const wxString ProjectFileWildcard( _( "KiCad project files (*.pro)|*.pro" ) );
const wxString SchematicFileWildcard( _( "KiCad schematic files (*.sch)|*.sch" ) ); const wxString SchematicFileWildcard( _( "KiCad schematic files (*.sch)|*.sch" ) );
const wxString NetlistFileWildcard( _( "KiCad netlist files (*.net)|*.net" ) ); const wxString NetlistFileWildcard( _( "KiCad netlist files (*.net)|*.net" ) );
const wxString GerberFileWildcard( _( "Gerber files (*.pho)|*.pho" ) ); const wxString GerberFileWildcard( _( "Gerber files (*.pho)|*.pho" ) );
const wxString PcbFileWildcard( _( "KiCad printed circuit board files (*.brd)|*.brd" ) ); const wxString LegacyPcbFileWildcard( _( "KiCad printed circuit board files (*.brd)|*.brd" ) );
const wxString PcbFileWildcard( _( "KiCad s-expr printed circuit board files (*.kicad_brd)|*.kicad_brd" ) );
const wxString FootprintLibFileWildcard( _( "KiCad footprint library file (*.mod)|*.mod" ) ); const wxString FootprintLibFileWildcard( _( "KiCad footprint library file (*.mod)|*.mod" ) );
const wxString PdfFileWildcard( _( "Portable document format files (*.pdf)|*.pdf" ) ); const wxString PdfFileWildcard( _( "Portable document format files (*.pdf)|*.pdf" ) );
const wxString MacrosFileWildcard( _( "KiCad recorded macros (*.mcr)|*.mcr" ) ); const wxString MacrosFileWildcard( _( "KiCad recorded macros (*.mcr)|*.mcr" ) );
......
...@@ -1671,32 +1671,32 @@ void TITLE_BLOCK::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCont ...@@ -1671,32 +1671,32 @@ void TITLE_BLOCK::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCont
|| !m_company.IsEmpty() || !m_comment1.IsEmpty() || !m_comment2.IsEmpty() || !m_company.IsEmpty() || !m_comment1.IsEmpty() || !m_comment2.IsEmpty()
|| !m_comment3.IsEmpty() || !m_comment4.IsEmpty() ) || !m_comment3.IsEmpty() || !m_comment4.IsEmpty() )
{ {
aFormatter->Print( aNestLevel, "(title-block\n" ); aFormatter->Print( aNestLevel, "(title_block\n" );
if( !m_title.IsEmpty() ) if( !m_title.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(title %s)", EscapedUTF8( m_title ).c_str() ); aFormatter->Print( aNestLevel+1, "(title %s)\n", EscapedUTF8( m_title ).c_str() );
if( !m_date.IsEmpty() ) if( !m_date.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(date %s)", EscapedUTF8( m_date ).c_str() ); aFormatter->Print( aNestLevel+1, "(date %s)\n", EscapedUTF8( m_date ).c_str() );
if( !m_revision.IsEmpty() ) if( !m_revision.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(rev %s)", EscapedUTF8( m_revision ).c_str() ); aFormatter->Print( aNestLevel+1, "(rev %s)\n", EscapedUTF8( m_revision ).c_str() );
if( !m_company.IsEmpty() ) if( !m_company.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(company %s)", EscapedUTF8( m_company ).c_str() ); aFormatter->Print( aNestLevel+1, "(company %s)\n", EscapedUTF8( m_company ).c_str() );
if( !m_comment1.IsEmpty() ) if( !m_comment1.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(comment1 %s)", EscapedUTF8( m_comment1 ).c_str() ); aFormatter->Print( aNestLevel+1, "(comment1 %s)\n", EscapedUTF8( m_comment1 ).c_str() );
if( !m_comment2.IsEmpty() ) if( !m_comment2.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(comment2 %s)", EscapedUTF8( m_comment2 ).c_str() ); aFormatter->Print( aNestLevel+1, "(comment2 %s)\n", EscapedUTF8( m_comment2 ).c_str() );
if( !m_comment3.IsEmpty() ) if( !m_comment3.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(comment3 %s)", EscapedUTF8( m_comment3 ).c_str() ); aFormatter->Print( aNestLevel+1, "(comment3 %s)\n", EscapedUTF8( m_comment3 ).c_str() );
if( !m_comment4.IsEmpty() ) if( !m_comment4.IsEmpty() )
aFormatter->Print( aNestLevel+1, "\n(comment4 %s)", EscapedUTF8( m_comment4 ).c_str() ); aFormatter->Print( aNestLevel+1, "(comment4 %s)\n", EscapedUTF8( m_comment4 ).c_str() );
aFormatter->Print( aNestLevel, "\n)\n" ); aFormatter->Print( aNestLevel, ")\n\n" );
} }
} }
...@@ -239,7 +239,7 @@ bool GBR_TO_PCB_EXPORTER::ExportPcb( int* LayerLookUpTable ) ...@@ -239,7 +239,7 @@ bool GBR_TO_PCB_EXPORTER::ExportPcb( int* LayerLookUpTable )
SetLocaleTo_C_standard(); SetLocaleTo_C_standard();
// write PCB header // write PCB header
fprintf( m_file, "PCBNEW-BOARD Version %d date %s\n\n", BOARD_FILE_VERSION, fprintf( m_file, "PCBNEW-BOARD Version %d date %s\n\n", LEGACY_BOARD_FILE_VERSION,
TO_UTF8( DateAndTime() ) ); TO_UTF8( DateAndTime() ) );
WriteGeneralDescrPcb( ); WriteGeneralDescrPcb( );
WriteSetup( ); WriteSetup( );
......
...@@ -61,6 +61,7 @@ extern const wxString SchematicFileWildcard; ...@@ -61,6 +61,7 @@ extern const wxString SchematicFileWildcard;
extern const wxString BoardFileWildcard; extern const wxString BoardFileWildcard;
extern const wxString NetlistFileWildcard; extern const wxString NetlistFileWildcard;
extern const wxString GerberFileWildcard; extern const wxString GerberFileWildcard;
extern const wxString LegacyPcbFileWildcard;
extern const wxString PcbFileWildcard; extern const wxString PcbFileWildcard;
extern const wxString PdfFileWildcard; extern const wxString PdfFileWildcard;
extern const wxString MacrosFileWildcard; extern const wxString MacrosFileWildcard;
......
This diff is collapsed.
...@@ -67,7 +67,7 @@ wxString BOARD_ITEM::GetLayerName() const ...@@ -67,7 +67,7 @@ wxString BOARD_ITEM::GetLayerName() const
/** @todo Move Pcbnew version of FormatBIU() where ever the common DSO/DSL code ends up. */ /** @todo Move Pcbnew version of FormatBIU() where ever the common DSO/DSL code ends up. */
std::string FormatBIU( int aValue ) std::string FormatBIU( int aValue )
{ {
#if !defined( USE_PCBNEW_NANOMETERS ) #if !defined( USE_PCBNEW_NANOMETRES )
wxFAIL_MSG( wxT( "Cannot use FormatBIU() unless Pcbnew is build with PCBNEW_NANOMETERS=ON." ) ); wxFAIL_MSG( wxT( "Cannot use FormatBIU() unless Pcbnew is build with PCBNEW_NANOMETERS=ON." ) );
#endif #endif
......
...@@ -554,35 +554,35 @@ void DRAWSEGMENT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCont ...@@ -554,35 +554,35 @@ void DRAWSEGMENT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCont
switch( m_Shape ) switch( m_Shape )
{ {
case S_SEGMENT: // Line case S_SEGMENT: // Line
aFormatter->Print( aNestLevel, "line (pts xy(%s) xy(%s))", aFormatter->Print( 0, "line (pts xy(%s) xy(%s))",
FormatBIU( m_Start ).c_str(), FormatBIU( m_Start ).c_str(),
FormatBIU( m_End ).c_str() ); FormatBIU( m_End ).c_str() );
break; break;
case S_CIRCLE: // Circle case S_CIRCLE: // Circle
aFormatter->Print( aNestLevel, "circle (center (xy %s)) (end (xy %s))", aFormatter->Print( 0, "circle (center (xy %s)) (end (xy %s))",
FormatBIU( m_Start ).c_str(), FormatBIU( m_Start ).c_str(),
FormatBIU( m_End ).c_str() ); FormatBIU( m_End ).c_str() );
break; break;
case S_ARC: // Arc case S_ARC: // Arc
aFormatter->Print( aNestLevel, "arc (start (xy %s)) (end (xy %s)) (angle %0.1f)", aFormatter->Print( 0, "arc (start (xy %s)) (end (xy %s)) (angle %0.1f)",
FormatBIU( m_Start ).c_str(), FormatBIU( m_Start ).c_str(),
FormatBIU( m_End ).c_str(), FormatBIU( m_End ).c_str(),
m_Angle ); m_Angle );
break; break;
case S_POLYGON: // Polygon case S_POLYGON: // Polygon
aFormatter->Print( aNestLevel, "line (pts" ); aFormatter->Print( 0, "line (pts" );
for( i = 0; i<m_PolyPoints.size(); ++i ) for( i = 0; i<m_PolyPoints.size(); ++i )
aFormatter->Print( aNestLevel, " (xy %s)", FormatBIU( m_PolyPoints[i] ).c_str() ); aFormatter->Print( 0, " (xy %s)", FormatBIU( m_PolyPoints[i] ).c_str() );
aFormatter->Print( aNestLevel, ")" ); aFormatter->Print( 0, ")" );
break; break;
case S_CURVE: // Bezier curve case S_CURVE: // Bezier curve
aFormatter->Print( aNestLevel, "curve pts(xy(%s) xy(%s) xy(%s) xy(%s))", aFormatter->Print( 0, "curve pts(xy(%s) xy(%s) xy(%s) xy(%s))",
FormatBIU( m_Start ).c_str(), FormatBIU( m_Start ).c_str(),
FormatBIU( m_BezierC1 ).c_str(), FormatBIU( m_BezierC1 ).c_str(),
FormatBIU( m_BezierC2 ).c_str(), FormatBIU( m_BezierC2 ).c_str(),
...@@ -593,18 +593,18 @@ void DRAWSEGMENT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCont ...@@ -593,18 +593,18 @@ void DRAWSEGMENT::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCont
wxFAIL_MSG( wxT( "Cannot format invalid DRAWSEGMENT type." ) ); wxFAIL_MSG( wxT( "Cannot format invalid DRAWSEGMENT type." ) );
}; };
aFormatter->Print( aNestLevel, " (layer %d)", GetLayer() ); aFormatter->Print( 0, " (layer %d)", GetLayer() );
if( m_Width != 0 ) if( m_Width != 0 )
aFormatter->Print( aNestLevel, " (width %s)", FormatBIU( m_Width ).c_str() ); aFormatter->Print( 0, " (width %s)", FormatBIU( m_Width ).c_str() );
if( GetTimeStamp() ) if( GetTimeStamp() )
aFormatter->Print( aNestLevel, " (tstamp %lX)", GetTimeStamp() ); aFormatter->Print( 0, " (tstamp %lX)", GetTimeStamp() );
if( GetStatus() ) if( GetStatus() )
aFormatter->Print( aNestLevel, " (status %X)", GetStatus() ); aFormatter->Print( 0, " (status %X)", GetStatus() );
aFormatter->Print( aNestLevel, ")\n" ); aFormatter->Print( 0, ")\n" );
} }
......
...@@ -666,7 +666,7 @@ EDA_ITEM* MODULE::Clone() const ...@@ -666,7 +666,7 @@ EDA_ITEM* MODULE::Clone() const
void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBits ) const void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBits ) const
throw( IO_ERROR ) throw( IO_ERROR )
{ {
aFormatter->Print( aNestLevel, "(module %s" , EscapedUTF8( m_LibRef ).c_str() ); aFormatter->Print( aNestLevel, "(module %s" , aFormatter->Quotew( m_LibRef ).c_str() );
if( IsLocked() ) if( IsLocked() )
aFormatter->Print( aNestLevel, " locked" ); aFormatter->Print( aNestLevel, " locked" );
...@@ -674,41 +674,41 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi ...@@ -674,41 +674,41 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi
if( IsPlaced() ) if( IsPlaced() )
aFormatter->Print( aNestLevel, " placed" ); aFormatter->Print( aNestLevel, " placed" );
aFormatter->Print( aNestLevel, " (tedit %lX) (tstamp %lX)\n", aFormatter->Print( 0, " (tedit %lX) (tstamp %lX)\n",
GetLastEditTime(), GetTimeStamp() ); GetLastEditTime(), GetTimeStamp() );
aFormatter->Print( aNestLevel+1, "(at %s", FormatBIU( m_Pos ).c_str() ); aFormatter->Print( aNestLevel+1, "(at %s", FormatBIU( m_Pos ).c_str() );
if( m_Orient != 0.0 ) if( m_Orient != 0.0 )
aFormatter->Print( aNestLevel+1, " %0.1f", m_Orient ); aFormatter->Print( 0, " %0.1f", m_Orient );
aFormatter->Print( aNestLevel+1, ")\n" ); aFormatter->Print( 0, ")\n" );
if( !m_Doc.IsEmpty() ) if( !m_Doc.IsEmpty() )
aFormatter->Print( aNestLevel+1, "(descr %s)\n", EscapedUTF8( m_Doc ).c_str() ); aFormatter->Print( aNestLevel+1, "(descr %s)\n", aFormatter->Quotew( m_Doc ).c_str() );
if( !m_KeyWord.IsEmpty() ) if( !m_KeyWord.IsEmpty() )
aFormatter->Print( aNestLevel+1, "(tags %s)\n", EscapedUTF8( m_KeyWord ).c_str() ); aFormatter->Print( aNestLevel+1, "(tags %s)\n", aFormatter->Quotew( m_KeyWord ).c_str() );
if( !m_Path.IsEmpty() ) if( !m_Path.IsEmpty() )
aFormatter->Print( aNestLevel+1, "(path %s)\n", EscapedUTF8( m_Path ).c_str() ); aFormatter->Print( aNestLevel+1, "(path %s)\n", aFormatter->Quotew( m_Path ).c_str() );
if( m_CntRot90 != 0 ) if( m_CntRot90 != 0 )
aFormatter->Print( aNestLevel+1, "(autoplace-cost90 %d)\n", m_CntRot90 ); aFormatter->Print( aNestLevel+1, "(autoplace_cost90 %d)\n", m_CntRot90 );
if( m_CntRot180 != 0 ) if( m_CntRot180 != 0 )
aFormatter->Print( aNestLevel+1, "(autoplace-cost180 %d)\n", m_CntRot180 ); aFormatter->Print( aNestLevel+1, "(autoplace_cost180 %d)\n", m_CntRot180 );
if( m_LocalSolderMaskMargin != 0 ) if( m_LocalSolderMaskMargin != 0 )
aFormatter->Print( aNestLevel+1, "(solder-mask-margin %s)\n", aFormatter->Print( aNestLevel+1, "(solder_mask_margin %s)\n",
FormatBIU( m_LocalSolderMaskMargin ).c_str() ); FormatBIU( m_LocalSolderMaskMargin ).c_str() );
if( m_LocalSolderPasteMargin != 0 ) if( m_LocalSolderPasteMargin != 0 )
aFormatter->Print( aNestLevel+1, "(solder-paste-margin %s)\n", aFormatter->Print( aNestLevel+1, "(solder_paste_margin %s)\n",
FormatBIU( m_LocalSolderPasteMargin ).c_str() ); FormatBIU( m_LocalSolderPasteMargin ).c_str() );
if( m_LocalSolderPasteMarginRatio != 0 ) if( m_LocalSolderPasteMarginRatio != 0 )
aFormatter->Print( aNestLevel+1, "(solder-paste-ratio %g)\n", aFormatter->Print( aNestLevel+1, "(solder_paste_ratio %g)\n",
m_LocalSolderPasteMarginRatio ); m_LocalSolderPasteMarginRatio );
if( m_LocalClearance != 0 ) if( m_LocalClearance != 0 )
...@@ -716,14 +716,14 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi ...@@ -716,14 +716,14 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi
FormatBIU( m_LocalClearance ).c_str() ); FormatBIU( m_LocalClearance ).c_str() );
if( m_ZoneConnection != UNDEFINED_CONNECTION ) if( m_ZoneConnection != UNDEFINED_CONNECTION )
aFormatter->Print( aNestLevel+1, "(zone-connect %d)\n", m_ZoneConnection ); aFormatter->Print( aNestLevel+1, "(zone_connect %d)\n", m_ZoneConnection );
if( m_ThermalWidth != 0 ) if( m_ThermalWidth != 0 )
aFormatter->Print( aNestLevel+1, "(thermal-width %s)\n", aFormatter->Print( aNestLevel+1, "(thermal_width %s)\n",
FormatBIU( m_ThermalWidth ).c_str() ); FormatBIU( m_ThermalWidth ).c_str() );
if( m_ThermalGap != 0 ) if( m_ThermalGap != 0 )
aFormatter->Print( aNestLevel+1, "(thermal-gap %s)\n", aFormatter->Print( aNestLevel+1, "(thermal_gap %s)\n",
FormatBIU( m_ThermalGap ).c_str() ); FormatBIU( m_ThermalGap ).c_str() );
// Attributes // Attributes
...@@ -732,12 +732,12 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi ...@@ -732,12 +732,12 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi
aFormatter->Print( aNestLevel+1, "(attr " ); aFormatter->Print( aNestLevel+1, "(attr " );
if( m_Attributs & MOD_CMS ) if( m_Attributs & MOD_CMS )
aFormatter->Print( aNestLevel+1, " smd" ); aFormatter->Print( 0, " smd" );
if( m_Attributs & MOD_VIRTUAL ) if( m_Attributs & MOD_VIRTUAL )
aFormatter->Print( aNestLevel+1, " virtual" ); aFormatter->Print( 0, " virtual" );
aFormatter->Print( aNestLevel+1, ")\n" ); aFormatter->Print( 0, ")\n" );
} }
m_Reference->Format( aFormatter, aNestLevel+1, aControlBits ); m_Reference->Format( aFormatter, aNestLevel+1, aControlBits );
...@@ -745,26 +745,26 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi ...@@ -745,26 +745,26 @@ void MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBi
// Save drawing elements. // Save drawing elements.
for( BOARD_ITEM* gr = m_Drawings; gr; gr = gr->Next() ) for( BOARD_ITEM* gr = m_Drawings; gr; gr = gr->Next() )
gr->Format( aFormatter+1, aNestLevel, aControlBits ); gr->Format( aFormatter, aNestLevel+1, aControlBits );
// Save pads. // Save pads.
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() ) for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
pad->Format( aFormatter+1, aNestLevel, aControlBits ); pad->Format( aFormatter, aNestLevel+1, aControlBits );
// Save 3D info. // Save 3D info.
for( S3D_MASTER* t3D = m_3D_Drawings; t3D; t3D = t3D->Next() ) for( S3D_MASTER* t3D = m_3D_Drawings; t3D; t3D = t3D->Next() )
{ {
if( !t3D->m_Shape3DName.IsEmpty() ) if( !t3D->m_Shape3DName.IsEmpty() )
{ {
aFormatter->Print( aNestLevel+1, "(3d-shape %s\n", aFormatter->Print( aNestLevel+1, "(3d_shape %s\n",
EscapedUTF8( t3D->m_Shape3DName ).c_str() ); aFormatter->Quotew( t3D->m_Shape3DName ).c_str() );
aFormatter->Print( aNestLevel+2, "(at (xyz %.16g %.16g %.16g))\n", aFormatter->Print( aNestLevel+2, "(at (xyz %.16g %.16g %.16g))\n",
t3D->m_MatPosition.x, t3D->m_MatPosition.x,
t3D->m_MatPosition.y, t3D->m_MatPosition.y,
t3D->m_MatPosition.z ); t3D->m_MatPosition.z );
aFormatter->Print( aNestLevel+2, "(scale (xyz %lf %lf %lf))\n", aFormatter->Print( aNestLevel+2, "(scale (xyz %.16g %.16g %.16g))\n",
t3D->m_MatScale.x, t3D->m_MatScale.x,
t3D->m_MatScale.y, t3D->m_MatScale.y,
t3D->m_MatScale.z ); t3D->m_MatScale.z );
......
...@@ -324,21 +324,21 @@ int NETCLASS::GetuViaMinDrill() const ...@@ -324,21 +324,21 @@ int NETCLASS::GetuViaMinDrill() const
void NETCLASS::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBits ) const void NETCLASS::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBits ) const
throw( IO_ERROR ) throw( IO_ERROR )
{ {
aFormatter->Print( aNestLevel, "(net-class %s %s\n", aFormatter->Print( aNestLevel, "(net_class %s %s\n",
EscapedUTF8( GetName() ).c_str(), aFormatter->Quotew( GetName() ).c_str(),
EscapedUTF8( GetDescription() ).c_str() ); aFormatter->Quotew( GetDescription() ).c_str() );
aFormatter->Print( aNestLevel+1, "(clearance %d)\n", GetClearance() ); aFormatter->Print( aNestLevel+1, "(clearance %s)\n", FormatBIU( GetClearance() ).c_str() );
aFormatter->Print( aNestLevel+1, "(trace-width %d)\n", GetTrackWidth() ); aFormatter->Print( aNestLevel+1, "(trace_width %s)\n", FormatBIU( GetTrackWidth() ).c_str() );
aFormatter->Print( aNestLevel+1, "(via-dia %d)\n", GetViaDiameter() ); aFormatter->Print( aNestLevel+1, "(via_dia %s)\n", FormatBIU( GetViaDiameter() ).c_str() );
aFormatter->Print( aNestLevel+1, "(via-drill %d)\n", GetViaDrill() ); aFormatter->Print( aNestLevel+1, "(via_drill %s)\n", FormatBIU( GetViaDrill() ).c_str() );
aFormatter->Print( aNestLevel+1, "(uvia-dia %d)\n", GetuViaDiameter() ); aFormatter->Print( aNestLevel+1, "(uvia_dia %s)\n", FormatBIU( GetuViaDiameter() ).c_str() );
aFormatter->Print( aNestLevel+1, "(uvia-drill %d)\n", GetuViaDrill() ); aFormatter->Print( aNestLevel+1, "(uvia_drill %s)\n", FormatBIU( GetuViaDrill() ).c_str() );
for( NETCLASS::const_iterator it = begin(); it!= end(); ++it ) for( NETCLASS::const_iterator it = begin(); it!= end(); ++it )
aFormatter->Print( aNestLevel+1, "(add-net %s)\n", EscapedUTF8( *it ).c_str() ); aFormatter->Print( aNestLevel+1, "(add_net %s)\n", aFormatter->Quotew( *it ).c_str() );
aFormatter->Print( aNestLevel, ")\n" ); aFormatter->Print( aNestLevel, ")\n\n" );
} }
...@@ -849,59 +849,60 @@ void D_PAD::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit ...@@ -849,59 +849,60 @@ void D_PAD::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit
switch( m_Attribute ) switch( m_Attribute )
{ {
case PAD_STANDARD: type = "thru-hole"; break; case PAD_STANDARD: type = "thru_hole"; break;
case PAD_SMD: type = "smd"; break; case PAD_SMD: type = "smd"; break;
case PAD_CONN: type = "connect"; break; case PAD_CONN: type = "connect"; break;
case PAD_HOLE_NOT_PLATED: type = "np-thru-hole"; break; case PAD_HOLE_NOT_PLATED: type = "np_thru_hole"; break;
default: default:
THROW_IO_ERROR( wxString::Format( _( "unknown pad attribute: %d" ), m_Attribute ) ); THROW_IO_ERROR( wxString::Format( _( "unknown pad attribute: %d" ), m_Attribute ) );
} }
aFormatter->Print( aNestLevel, "(pad %s %s %s (size %s)\n", aFormatter->Print( aNestLevel, "(pad %s %s %s (size %s)\n",
EscapedUTF8( GetPadName() ).c_str(), type.c_str(), shape.c_str(), aFormatter->Quotew( GetPadName() ).c_str(), type.c_str(), shape.c_str(),
FormatBIU( m_Size ).c_str() ); FormatBIU( m_Size ).c_str() );
aFormatter->Print( aNestLevel+1, "(at %s", FormatBIU( m_Pos0 ).c_str() ); aFormatter->Print( aNestLevel+1, "(at %s", FormatBIU( m_Pos0 ).c_str() );
if( m_Orient != 0.0 ) if( m_Orient != 0.0 )
aFormatter->Print( aNestLevel+1, " %0.1f", m_Orient ); aFormatter->Print( 0, " %0.1f", m_Orient );
aFormatter->Print( aNestLevel+1, ")\n" ); aFormatter->Print( 0, ")\n" );
if( (m_Drill.GetWidth() > 0) || (m_Drill.GetHeight() > 0) ) if( (m_Drill.GetWidth() > 0) || (m_Drill.GetHeight() > 0) )
{ {
std::string drill = (m_Drill.GetHeight() > 0) ? FormatBIU( m_Drill ).c_str() : std::string drill = (m_Drill.GetHeight() > 0) ? FormatBIU( m_Drill ).c_str() :
FormatBIU( m_Drill.GetWidth() ).c_str(); FormatBIU( m_Drill.GetWidth() ).c_str();
aFormatter->Print( aNestLevel+1, "(drill %s\n", drill.c_str() ); aFormatter->Print( aNestLevel+1, "(drill %s", drill.c_str() );
if( (m_Offset.x > 0) || (m_Offset.y > 0) ) if( (m_Offset.x > 0) || (m_Offset.y > 0) )
{ {
std::string drillOffset = ( m_Offset.x > 0 ) ? std::string drillOffset = ( m_Offset.x > 0 ) ?
FormatBIU( m_Offset ).c_str() : FormatBIU( m_Offset ).c_str() :
FormatBIU( m_Offset.x ).c_str(); FormatBIU( m_Offset.x ).c_str();
aFormatter->Print( aNestLevel+1, " (offset %s)", drillOffset.c_str() ); aFormatter->Print( 0, " (offset %s)", drillOffset.c_str() );
} }
aFormatter->Print( aNestLevel+1, ")\n" ); aFormatter->Print( 0, ")\n" );
} }
aFormatter->Print( aNestLevel+1, "(layers %08X)\n", GetLayerMask() ); aFormatter->Print( aNestLevel+1, "(layers %08X)\n", GetLayerMask() );
aFormatter->Print( aNestLevel+1, "(net %d %s)\n", GetNet(), EscapedUTF8( m_Netname ).c_str() ); aFormatter->Print( aNestLevel+1, "(net %d %s)\n",
GetNet(), aFormatter->Quotew( m_Netname ).c_str() );
if( m_LengthDie != 0 ) if( m_LengthDie != 0 )
aFormatter->Print( aNestLevel+1, "(die-length %s)\n", FormatBIU( m_LengthDie ).c_str() ); aFormatter->Print( aNestLevel+1, "(die_length %s)\n", FormatBIU( m_LengthDie ).c_str() );
if( m_LocalSolderMaskMargin != 0 ) if( m_LocalSolderMaskMargin != 0 )
aFormatter->Print( aNestLevel+1, "(solder-mask-margin %s)\n", aFormatter->Print( aNestLevel+1, "(solder_mask_margin %s)\n",
FormatBIU( m_LocalSolderMaskMargin ).c_str() ); FormatBIU( m_LocalSolderMaskMargin ).c_str() );
if( m_LocalSolderPasteMargin != 0 ) if( m_LocalSolderPasteMargin != 0 )
aFormatter->Print( aNestLevel+1, "(solder-paste-margin %s)\n", aFormatter->Print( aNestLevel+1, "(solder_paste_margin %s)\n",
FormatBIU( m_LocalSolderPasteMargin ).c_str() ); FormatBIU( m_LocalSolderPasteMargin ).c_str() );
if( m_LocalSolderPasteMarginRatio != 0 ) if( m_LocalSolderPasteMarginRatio != 0 )
aFormatter->Print( aNestLevel+1, "(solder-paste-margin-ratio %g)\n", aFormatter->Print( aNestLevel+1, "(solder_paste_margin_ratio %g)\n",
m_LocalSolderPasteMarginRatio ); m_LocalSolderPasteMarginRatio );
if( m_LocalClearance != 0 ) if( m_LocalClearance != 0 )
...@@ -909,14 +910,14 @@ void D_PAD::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit ...@@ -909,14 +910,14 @@ void D_PAD::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit
FormatBIU( m_LocalClearance ).c_str() ); FormatBIU( m_LocalClearance ).c_str() );
if( GetZoneConnection() != UNDEFINED_CONNECTION ) if( GetZoneConnection() != UNDEFINED_CONNECTION )
aFormatter->Print( aNestLevel+1, "(zone-connect %d)\n", GetZoneConnection() ); aFormatter->Print( aNestLevel+1, "(zone_connect %d)\n", GetZoneConnection() );
if( GetThermalWidth() != 0 ) if( GetThermalWidth() != 0 )
aFormatter->Print( aNestLevel+1, "(thermal-width %s)\n", aFormatter->Print( aNestLevel+1, "(thermal_width %s)\n",
FormatBIU( GetThermalWidth() ).c_str() ); FormatBIU( GetThermalWidth() ).c_str() );
if( GetThermalGap() != 0 ) if( GetThermalGap() != 0 )
aFormatter->Print( aNestLevel+1, "(thermal-gap %s)\n", aFormatter->Print( aNestLevel+1, "(thermal_gap %s)\n",
FormatBIU( GetThermalGap() ).c_str() ); FormatBIU( GetThermalGap() ).c_str() );
aFormatter->Print( aNestLevel, ")\n" ); aFormatter->Print( aNestLevel, ")\n" );
......
...@@ -194,12 +194,12 @@ EDA_ITEM* TEXTE_PCB::Clone() const ...@@ -194,12 +194,12 @@ EDA_ITEM* TEXTE_PCB::Clone() const
void TEXTE_PCB::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBits ) const void TEXTE_PCB::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBits ) const
throw( IO_ERROR ) throw( IO_ERROR )
{ {
aFormatter->Print( aNestLevel, "(pcb-text (layer %d)", GetLayer() ); aFormatter->Print( aNestLevel, "(pcb_text (layer %d)", GetLayer() );
if( GetTimeStamp() ) if( GetTimeStamp() )
aFormatter->Print( aNestLevel, " (tstamp %lX)", GetTimeStamp() ); aFormatter->Print( 0, " (tstamp %lX)", GetTimeStamp() );
aFormatter->Print( aNestLevel, "\n" ); aFormatter->Print( 0, "\n" );
EDA_TEXT::Format( aFormatter, aNestLevel+1, aControlBits ); EDA_TEXT::Format( aFormatter, aNestLevel+1, aControlBits );
......
...@@ -491,10 +491,10 @@ void TEXTE_MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCon ...@@ -491,10 +491,10 @@ void TEXTE_MODULE::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aCon
if( parent ) if( parent )
orient += parent->GetOrientation(); orient += parent->GetOrientation();
aFormatter->Print( aNestLevel, "(module-text %d (at %s %0.1f)%s)\n", m_Type, aFormatter->Print( aNestLevel, "(module_text %d (at %s %0.1f)%s\n", m_Type,
FormatBIU( m_Pos0 ).c_str(), orient, (m_NoShow) ? "hide" : "" ); FormatBIU( m_Pos0 ).c_str(), orient, (m_NoShow) ? "hide" : "" );
EDA_TEXT::Format( aFormatter+1, aNestLevel, aControlBits ); EDA_TEXT::Format( aFormatter, aNestLevel+1, aControlBits );
aFormatter->Print( aNestLevel, ")\n" ); aFormatter->Print( aNestLevel, ")\n" );
} }
......
...@@ -1579,7 +1579,7 @@ void TRACK::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit ...@@ -1579,7 +1579,7 @@ void TRACK::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit
FormatBIU( m_Start ).c_str(), FormatBIU( m_Width ).c_str() ); FormatBIU( m_Start ).c_str(), FormatBIU( m_Width ).c_str() );
if( m_Drill != UNDEFINED_DRILL_DIAMETER ) if( m_Drill != UNDEFINED_DRILL_DIAMETER )
aFormatter->Print( aNestLevel, " (drill %s)", FormatBIU( m_Drill ).c_str() ); aFormatter->Print( 0, " (drill %s)", FormatBIU( m_Drill ).c_str() );
} }
else else
{ {
...@@ -1588,15 +1588,15 @@ void TRACK::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit ...@@ -1588,15 +1588,15 @@ void TRACK::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aControlBit
FormatBIU( m_Width ).c_str() ); FormatBIU( m_Width ).c_str() );
} }
aFormatter->Print( aNestLevel, " (layer %d) (net %d)", GetLayer(), GetNet() ); aFormatter->Print( 0, " (layer %d) (net %d)", GetLayer(), GetNet() );
if( GetTimeStamp() != 0 ) if( GetTimeStamp() != 0 )
aFormatter->Print( aNestLevel, " (tstamp %lX)", GetTimeStamp() ); aFormatter->Print( 0, " (tstamp %lX)", GetTimeStamp() );
if( GetStatus() != 0 ) if( GetStatus() != 0 )
aFormatter->Print( aNestLevel, " (status %X)", GetStatus() ); aFormatter->Print( 0, " (status %X)", GetStatus() );
aFormatter->Print( aNestLevel, ")\n" ); aFormatter->Print( 0, ")\n" );
} }
......
...@@ -960,7 +960,8 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC ...@@ -960,7 +960,8 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC
throw( IO_ERROR ) throw( IO_ERROR )
{ {
aFormatter->Print( aNestLevel, "(zone (net %d %s) (layer %d) (tstamp %lX)\n", aFormatter->Print( aNestLevel, "(zone (net %d %s) (layer %d) (tstamp %lX)\n",
GetNet(), EscapedUTF8( m_Netname ).c_str(), GetLayer(), GetTimeStamp() ); GetNet(), aFormatter->Quotew( m_Netname ).c_str(),
GetLayer(), GetTimeStamp() );
// Save the outline aux info // Save the outline aux info
...@@ -986,18 +987,18 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC ...@@ -986,18 +987,18 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC
{ {
default: default:
case PAD_IN_ZONE: padoption = "yes"; break; case PAD_IN_ZONE: padoption = "yes"; break;
case THERMAL_PAD: padoption = "use-thermal"; break; case THERMAL_PAD: padoption = "use_thermal"; break;
case PAD_NOT_IN_ZONE: padoption = "no"; break; case PAD_NOT_IN_ZONE: padoption = "no"; break;
} }
aFormatter->Print( aNestLevel+1, "(connect-pads %s (clearance %s))\n", aFormatter->Print( aNestLevel+1, "(connect_pads %s (clearance %s))\n",
padoption.c_str(), FormatBIU( m_ZoneClearance ).c_str() ); padoption.c_str(), FormatBIU( m_ZoneClearance ).c_str() );
aFormatter->Print( aNestLevel+1, "(min-thickness %s)\n", aFormatter->Print( aNestLevel+1, "(min_thickness %s)\n",
FormatBIU( m_ZoneMinThickness ).c_str() ); FormatBIU( m_ZoneMinThickness ).c_str() );
aFormatter->Print( aNestLevel+1, aFormatter->Print( aNestLevel+1,
"(fill %s (mode %s) (arc-segments %d) (thermal-gap %s) (thermal-bridge-width %s)\n", "(fill %s (mode %s) (arc_segments %d) (thermal_gap %s) (thermal_bridge_width %s)\n",
(m_IsFilled) ? "yes" : "no", (m_IsFilled) ? "yes" : "no",
(m_FillMode) ? "segment" : "polygon", (m_FillMode) ? "segment" : "polygon",
m_ArcToSegmentsCount, m_ArcToSegmentsCount,
...@@ -1023,15 +1024,25 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC ...@@ -1023,15 +1024,25 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC
if( cv.size() ) if( cv.size() )
{ {
aFormatter->Print( aNestLevel+1, "(polygon (pts" ); aFormatter->Print( aNestLevel+1, "(polygon\n");
aFormatter->Print( aNestLevel+2, "(pts\n" );
for( std::vector< CPolyPt >::const_iterator it = cv.begin(); it != cv.end(); ++it ) for( std::vector< CPolyPt >::const_iterator it = cv.begin(); it != cv.end(); ++it )
{ {
aFormatter->Print( aNestLevel+1, " (xy %s %s)", aFormatter->Print( aNestLevel+3, "(xy %s %s)\n",
FormatBIU( it->x ).c_str(), FormatBIU( it->y ).c_str() ); FormatBIU( it->x ).c_str(), FormatBIU( it->y ).c_str() );
if( it->end_contour ) if( it->end_contour )
aFormatter->Print( aNestLevel+1, ")\n(polygon (pts" ); {
aFormatter->Print( aNestLevel+2, ")\n" );
if( it+1 != cv.end() )
{
aFormatter->Print( aNestLevel+1, ")\n" );
aFormatter->Print( aNestLevel+1, "(polygon\n" );
aFormatter->Print( aNestLevel+2, "(pts\n" );
}
}
} }
aFormatter->Print( aNestLevel+1, ")\n" ); aFormatter->Print( aNestLevel+1, ")\n" );
...@@ -1042,15 +1053,25 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC ...@@ -1042,15 +1053,25 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC
if( fv.size() ) if( fv.size() )
{ {
aFormatter->Print( aNestLevel+1, "(filled-polygon (pts" ); aFormatter->Print( aNestLevel+1, "(filled_polygon\n" );
aFormatter->Print( aNestLevel+2, "(pts\n" );
for( std::vector< CPolyPt >::const_iterator it = fv.begin(); it != fv.end(); ++it ) for( std::vector< CPolyPt >::const_iterator it = fv.begin(); it != fv.end(); ++it )
{ {
aFormatter->Print( aNestLevel+1, " (xy %s %s)", aFormatter->Print( aNestLevel+3, "(xy %s %s)\n",
FormatBIU( it->x ).c_str(), FormatBIU( it->y ).c_str() ); FormatBIU( it->x ).c_str(), FormatBIU( it->y ).c_str() );
if( it->end_contour ) if( it->end_contour )
aFormatter->Print( aNestLevel+1, ")\n(filled-polygon (pts" ); {
aFormatter->Print( aNestLevel+2, ")\n" );
if( it+1 != fv.end() )
{
aFormatter->Print( aNestLevel+1, ")\n" );
aFormatter->Print( aNestLevel+1, "(filled_polygon\n" );
aFormatter->Print( aNestLevel+2, "(pts\n" );
}
}
} }
aFormatter->Print( aNestLevel+1, ")\n" ); aFormatter->Print( aNestLevel+1, ")\n" );
...@@ -1061,7 +1082,7 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC ...@@ -1061,7 +1082,7 @@ void ZONE_CONTAINER::Format( OUTPUTFORMATTER* aFormatter, int aNestLevel, int aC
if( segs.size() ) if( segs.size() )
{ {
aFormatter->Print( aNestLevel+1, "(fill-segments\n" ); aFormatter->Print( aNestLevel+1, "(fill_segments\n" );
for( std::vector< SEGMENT >::const_iterator it = segs.begin(); it != segs.end(); ++it ) for( std::vector< SEGMENT >::const_iterator it = segs.begin(); it != segs.end(); ++it )
{ {
......
...@@ -48,7 +48,7 @@ ...@@ -48,7 +48,7 @@
#include <wildcards_and_files_ext.h> #include <wildcards_and_files_ext.h>
#include <class_board.h> #include <class_board.h>
#include <build_version.h> // BOARD_FILE_VERSION #include <build_version.h> // LEGACY_BOARD_FILE_VERSION
static const wxString pcbBackupFileExtension( wxT( "000" ) ); static const wxString pcbBackupFileExtension( wxT( "000" ) );
...@@ -183,7 +183,7 @@ the changes?" ) ) ) ...@@ -183,7 +183,7 @@ the changes?" ) ) )
name = fileName.GetFullName(); name = fileName.GetFullName();
} }
wxFileDialog dlg( this, _( "Open Board File" ), path, name, PcbFileWildcard, wxFileDialog dlg( this, _( "Open Board File" ), path, name, LegacyPcbFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST ); wxFD_OPEN | wxFD_FILE_MUST_EXIST );
if( dlg.ShowModal() == wxID_CANCEL ) if( dlg.ShowModal() == wxID_CANCEL )
...@@ -230,12 +230,12 @@ the changes?" ) ) ) ...@@ -230,12 +230,12 @@ the changes?" ) ) )
int ver; int ver;
sscanf( reader.Line() , "PCBNEW-BOARD Version %d date", &ver ); sscanf( reader.Line() , "PCBNEW-BOARD Version %d date", &ver );
if ( ver > BOARD_FILE_VERSION ) if ( ver > LEGACY_BOARD_FILE_VERSION )
{ {
DisplayInfoMessage( this, _( "This file was created by a more recent \ DisplayInfoMessage( this, _( "This file was created by a more recent \
version of Pcbnew and may not load correctly. Please consider updating!" ) ); version of Pcbnew and may not load correctly. Please consider updating!" ) );
} }
else if ( ver < BOARD_FILE_VERSION ) else if ( ver < LEGACY_BOARD_FILE_VERSION )
{ {
DisplayInfoMessage( this, _( "This file was created by an older \ DisplayInfoMessage( this, _( "This file was created by an older \
version of Pcbnew. It will be stored in the new file format when you save \ version of Pcbnew. It will be stored in the new file format when you save \
...@@ -288,13 +288,13 @@ this file again." ) ); ...@@ -288,13 +288,13 @@ this file again." ) );
try try
{ {
// load or append either: // load or append either:
loadedBoard = IO_MGR::Load( IO_MGR::KICAD, GetScreen()->GetFileName(), loadedBoard = IO_MGR::Load( IO_MGR::LEGACY, GetScreen()->GetFileName(),
aAppend ? GetBoard() : NULL, aAppend ? GetBoard() : NULL,
NULL ); NULL );
if( !aAppend ) if( !aAppend )
{ {
if( loadedBoard->GetFileFormatVersionAtLoad() < BOARD_FILE_VERSION ) if( loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION )
{ {
DisplayInfoMessage( this, _( "This file was created by an older \ DisplayInfoMessage( this, _( "This file was created by an older \
version of Pcbnew. It will be stored in the new file format when you save \ version of Pcbnew. It will be stored in the new file format when you save \
...@@ -418,19 +418,27 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF ...@@ -418,19 +418,27 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
wxString upperTxt; wxString upperTxt;
wxString lowerTxt; wxString lowerTxt;
wxString msg; wxString msg;
wxString wildcard;
int wildcardIndex = 0;
bool saveok = true; bool saveok = true;
wildcard = LegacyPcbFileWildcard;
#if defined( USE_PCBNEW_SEXPR_FILE_FORMAT )
wildcard += wxT( "|" ) + PcbFileWildcard;
#endif
if( aFileName == wxEmptyString ) if( aFileName == wxEmptyString )
{ {
wxFileDialog dlg( this, _( "Save Board File" ), wxEmptyString, wxFileDialog dlg( this, _( "Save Board File" ), wxEmptyString, GetScreen()->GetFileName(),
GetScreen()->GetFileName(), PcbFileWildcard, wildcard, wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
if( dlg.ShowModal() != wxID_OK ) if( dlg.ShowModal() != wxID_OK )
return false; return false;
GetScreen()->SetFileName( dlg.GetPath() ); GetScreen()->SetFileName( dlg.GetPath() );
wildcardIndex = dlg.GetFilterIndex(); // Legacy or s-expression file format.
} }
else else
{ {
...@@ -448,6 +456,9 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF ...@@ -448,6 +456,9 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
pcbFileName = GetScreen()->GetFileName(); pcbFileName = GetScreen()->GetFileName();
if( pcbFileName.GetExt().IsEmpty() )
pcbFileName.SetExt( IO_MGR::GetFileExtension( (IO_MGR::PCB_FILE_T) wildcardIndex ) );
if( !IsWritable( pcbFileName ) ) if( !IsWritable( pcbFileName ) )
return false; return false;
...@@ -493,21 +504,26 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF ...@@ -493,21 +504,26 @@ bool PCB_EDIT_FRAME::SavePcbFile( const wxString& aFileName, bool aCreateBackupF
try try
{ {
wxString header = wxString::Format( PROPERTIES props;
wxT( "PCBNEW-BOARD Version %d date %s\n\n# Created by Pcbnew%s\n\n" ), PLUGIN* plugin = IO_MGR::PluginFind( ( IO_MGR::PCB_FILE_T ) wildcardIndex );
BOARD_FILE_VERSION, DateAndTime().GetData(),
GetBuildVersion().GetData() ); if( plugin == NULL )
THROW_IO_ERROR( wxString::Format( _( "cannot find file plug in for file format '%s'" ),
GetChars( pcbFileName.GetExt() ) ) );
PROPERTIES props; wxString header = wxString::Format(
wxT( "PCBNEW-BOARD Version %d date %s\n\n# Created by Pcbnew%s\n\n" ),
LEGACY_BOARD_FILE_VERSION, DateAndTime().GetData(),
GetBuildVersion().GetData() );
props["header"] = header; props["header"] = header;
IO_MGR::Save( IO_MGR::KICAD, pcbFileName.GetFullPath(), GetBoard(), &props ); plugin->Save( pcbFileName.GetFullPath(), GetBoard(), &props );
} }
catch( IO_ERROR ioe ) catch( IO_ERROR ioe )
{ {
wxString msg = wxString::Format( _( "Error saving board.\n%s" ), wxString msg = wxString::Format( _( "Error saving board.\n%s" ),
ioe.errorText.GetData() ); ioe.errorText.GetData() );
wxMessageBox( msg, _( "Save Board File" ), wxICON_ERROR | wxOK ); wxMessageBox( msg, _( "Save Board File" ), wxICON_ERROR | wxOK );
saveok = false; saveok = false;
} }
......
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <io_mgr.h> #include <io_mgr.h>
#include <legacy_plugin.h>
#include <kicad_plugin.h> #include <kicad_plugin.h>
...@@ -39,7 +40,7 @@ ...@@ -39,7 +40,7 @@
// plugins coexisting. // plugins coexisting.
// static KICAD_PLUGIN kicad_plugin; // a secret // static LEGACY_PLUGIN kicad_plugin; // a secret
//static EAGLE_PLUGIN eagle_plugin; //static EAGLE_PLUGIN eagle_plugin;
PLUGIN* IO_MGR::PluginFind( PCB_FILE_T aFileType ) PLUGIN* IO_MGR::PluginFind( PCB_FILE_T aFileType )
...@@ -49,10 +50,12 @@ PLUGIN* IO_MGR::PluginFind( PCB_FILE_T aFileType ) ...@@ -49,10 +50,12 @@ PLUGIN* IO_MGR::PluginFind( PCB_FILE_T aFileType )
switch( aFileType ) switch( aFileType )
{ {
case LEGACY:
return new LEGACY_PLUGIN();
case KICAD: case KICAD:
return new KICAD_PLUGIN(); return new KICAD_PLUGIN();
/* /*
case EAGLE: case EAGLE:
return &eagle_plugin; return &eagle_plugin;
...@@ -80,14 +83,32 @@ const wxString IO_MGR::ShowType( PCB_FILE_T aFileType ) ...@@ -80,14 +83,32 @@ const wxString IO_MGR::ShowType( PCB_FILE_T aFileType )
default: default:
return wxString::Format( _( "Unknown PCB_FILE_T value: %d" ), aFileType ); return wxString::Format( _( "Unknown PCB_FILE_T value: %d" ), aFileType );
case LEGACY:
return wxString( wxT( "KiCad Legacy" ) );
case KICAD: case KICAD:
return wxString( wxT( "KiCad" ) ); return wxString( wxT( "KiCad" ) );
} }
} }
const wxString IO_MGR::GetFileExtension( PCB_FILE_T aFileType )
{
wxString ext = wxEmptyString;
PLUGIN* plugin = PluginFind( aFileType );
if( plugin != NULL )
{
ext = plugin->GetFileExtension();
PluginRelease( plugin );
}
return ext;
}
BOARD* IO_MGR::Load( PCB_FILE_T aFileType, const wxString& aFileName, BOARD* IO_MGR::Load( PCB_FILE_T aFileType, const wxString& aFileName,
BOARD* aAppendToMe, PROPERTIES* aProperties ) BOARD* aAppendToMe, PROPERTIES* aProperties )
{ {
// release the PLUGIN even if an exception is thrown. // release the PLUGIN even if an exception is thrown.
PLUGIN::RELEASER pi = PluginFind( aFileType ); PLUGIN::RELEASER pi = PluginFind( aFileType );
......
...@@ -47,7 +47,8 @@ public: ...@@ -47,7 +47,8 @@ public:
*/ */
enum PCB_FILE_T enum PCB_FILE_T
{ {
KICAD, LEGACY, //< Legacy Pcbnew file formats prior to s-expression.
KICAD, //< S-expression Pcbnew file format.
// add your type here. // add your type here.
// EAGLE, // EAGLE,
...@@ -84,6 +85,16 @@ public: ...@@ -84,6 +85,16 @@ public:
*/ */
static const wxString ShowType( PCB_FILE_T aFileType ); static const wxString ShowType( PCB_FILE_T aFileType );
/**
* Function GetFileExtension
* returns the file extension for \a aFileType.
*
* @param aFileType The #PCB_FILE_T type.
* @return A wxString object containing the file extension for \a aFileType or an empty
* string if \a aFileType is invalid.
*/
static const wxString GetFileExtension( PCB_FILE_T aFileType );
/** /**
* Function Load * Function Load
* finds the requested PLUGIN and if found, calls the PLUGIN->Load(..) funtion * finds the requested PLUGIN and if found, calls the PLUGIN->Load(..) funtion
...@@ -106,7 +117,7 @@ public: ...@@ -106,7 +117,7 @@ public:
* or file cannot be loaded. * or file cannot be loaded.
*/ */
static BOARD* Load( PCB_FILE_T aFileType, const wxString& aFileName, static BOARD* Load( PCB_FILE_T aFileType, const wxString& aFileName,
BOARD* aAppendToMe = NULL, PROPERTIES* aProperties = NULL ); BOARD* aAppendToMe = NULL, PROPERTIES* aProperties = NULL );
/** /**
* Function Save * Function Save
...@@ -132,7 +143,7 @@ public: ...@@ -132,7 +143,7 @@ public:
* @throw IO_ERROR if there is a problem saving or exporting. * @throw IO_ERROR if there is a problem saving or exporting.
*/ */
static void Save( PCB_FILE_T aFileType, const wxString& aFileName, static void Save( PCB_FILE_T aFileType, const wxString& aFileName,
BOARD* aBoard, PROPERTIES* aProperties = NULL ); BOARD* aBoard, PROPERTIES* aProperties = NULL );
}; };
...@@ -166,7 +177,13 @@ public: ...@@ -166,7 +177,13 @@ public:
* Function PluginName * Function PluginName
* returns a brief hard coded name for this PLUGIN. * returns a brief hard coded name for this PLUGIN.
*/ */
virtual const wxString& PluginName() = 0; virtual const wxString& PluginName() const = 0;
/**
* Function GetFileExtension
* returns the file extension for the PLUGIN.
*/
virtual const wxString& GetFileExtension() const = 0;
/** /**
* Function Load * Function Load
...@@ -195,7 +212,7 @@ public: ...@@ -195,7 +212,7 @@ public:
* input file if possible. * input file if possible.
*/ */
virtual BOARD* Load( const wxString& aFileName, BOARD* aAppendToMe, virtual BOARD* Load( const wxString& aFileName, BOARD* aAppendToMe,
PROPERTIES* aProperties = NULL ); PROPERTIES* aProperties = NULL );
/** /**
* Function Save * Function Save
...@@ -218,7 +235,7 @@ public: ...@@ -218,7 +235,7 @@ public:
* @throw IO_ERROR if there is a problem saving or exporting. * @throw IO_ERROR if there is a problem saving or exporting.
*/ */
virtual void Save( const wxString& aFileName, BOARD* aBoard, virtual void Save( const wxString& aFileName, BOARD* aBoard,
PROPERTIES* aProperties = NULL ); PROPERTIES* aProperties = NULL );
//-----</PUBLIC PLUGIN API>------------------------------------------------ //-----</PUBLIC PLUGIN API>------------------------------------------------
......
...@@ -1231,7 +1231,7 @@ int PCB_EDIT_FRAME::SavePcbFormatAscii( FILE* aFile ) ...@@ -1231,7 +1231,7 @@ int PCB_EDIT_FRAME::SavePcbFormatAscii( FILE* aFile )
LOCALE_IO toggle; LOCALE_IO toggle;
// Writing file header. // Writing file header.
fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", BOARD_FILE_VERSION, fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", LEGACY_BOARD_FILE_VERSION,
TO_UTF8( DateAndTime() ) ); TO_UTF8( DateAndTime() ) );
fprintf( aFile, "# Created by Pcbnew%s\n\n", TO_UTF8( GetBuildVersion() ) ); fprintf( aFile, "# Created by Pcbnew%s\n\n", TO_UTF8( GetBuildVersion() ) );
......
This source diff could not be displayed because it is too large. You can view the blob instead.
This diff is collapsed.
This diff is collapsed.
#ifndef LEGACY_PLUGIN_H_
#define LEGACY_PLUGIN_H_
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2011 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <io_mgr.h>
#include <string>
typedef int BIU;
class PCB_TARGET;
class MODULE;
class DRAWSEGMENT;
class NETINFO;
class TEXTE_PCB;
class TRACK;
class NETCLASS;
class ZONE_CONTAINER;
class DIMENSION;
class NETINFO_ITEM;
class TEXTE_MODULE;
class EDGE_MODULE;
class TRACK;
class SEGZONE;
class D_PAD;
/**
* Class LEGACY_PLUGIN
* is a PLUGIN derivation which could possibly be put into a DLL/DSO.
* It is not thread safe, but it is re-entrant multiple times in sequence.
*/
class LEGACY_PLUGIN : public PLUGIN
{
public:
//-----<PLUGIN>-------------------------------------------------------------
const wxString& PluginName() const
{
static const wxString name = wxT( "KiCad-Legacy" );
return name;
}
const wxString& GetFileExtension() const
{
static const wxString extension = wxT( "brd" );
return extension;
}
BOARD* Load( const wxString& aFileName, BOARD* aAppendToMe, PROPERTIES* aProperties = NULL ); // overload
void Save( const wxString& aFileName, BOARD* aBoard, PROPERTIES* aProperties = NULL ); // overload
//-----</PLUGIN>------------------------------------------------------------
protected:
wxString m_error; ///< for throwing exceptions
BOARD* m_board; ///< which BOARD, no ownership here
PROPERTIES* m_props; ///< passed via Save() or Load(), no ownership, may be NULL.
LINE_READER* m_reader; ///< no ownership here.
FILE* m_fp; ///< no ownership here.
wxString m_filename; ///< for saves only, name is in m_reader for loads
wxString m_field; ///< reused to stuff MODULE fields.
int m_loading_format_version; ///< which BOARD_FORMAT_VERSION am I Load()ing?
/// initialize PLUGIN like a constructor would, and futz with fresh BOARD if needed.
void init( PROPERTIES* aProperties );
double biuToDisk; ///< convert from BIUs to disk engineering units with this scale factor
double diskToBiu; ///< convert from disk engineering units to BIUs with this scale factor
/**
* Function biuParse
* parses an ASCII decimal floating point value and scales it into a BIU
* according to the current value of diskToBui. This fuction is the complement of
* fmtBIU(). One has to know what the other is doing.
*
* @param aValue is the ASCII value in C locale form with possible leading whitespace
*
* @param nptrptr may be NULL, but if not, then it tells where to put a
* pointer to the next unconsumed input text. See "man strtod" for more information.
*
* @return BIU - the converted Board Internal Unit.
*/
BIU biuParse( const char* aValue, const char** nptrptr = NULL );
/**
* Function degParse
* parses an ASCII decimal floating point value which is certainly an angle. This
* is a dedicated function for encapsulating support for the migration from
* tenths of degrees to degrees in floating point. This function is the complement of
* fmtDEG(). One has to know what the other is doing.
*
* @param aValue is the ASCII value in C locale form with possible leading whitespace
*
* @param nptrptr may be NULL, but if not, then it tells where to put a
* pointer to the next unconsumed input text. See "man strtod" for more information.
*
* @return double - the string converted to a primitive double type
*/
double degParse( const char* aValue, const char** nptrptr = NULL );
//-----<load/parse functions>-----------------------------------------------
void checkVersion();
void loadAllSections( bool doAppend );
void loadGENERAL();
void loadSETUP();
void loadSHEET();
void loadMODULE();
void load3D( MODULE* aModule );
void loadPAD( MODULE* aModule );
void loadMODULE_TEXT( TEXTE_MODULE* aText );
void loadMODULE_EDGE( MODULE* aModule );
void loadPCB_LINE();
void loadNETINFO_ITEM();
void loadPCB_TEXT();
void loadNETCLASS();
/**
* Function loadTrackList
* reads a list of segments (Tracks and Vias, or Segzones)
*
* @param aInsertBeforeMe may be either NULL indicating append, or it may
* be an insertion point before which all the segments are inserted.
*
* @param aStructType is either PCB_TRACE_T to indicate tracks and vias, or
* PCB_ZONE_T to indicate oldschool zone segments (before polygons came to be).
*/
void loadTrackList( TRACK* aInsertBeforeMe, int aStructType );
void loadZONE_CONTAINER(); // "$CZONE_OUTLINE"
void loadDIMENSION(); // "$COTATION"
void loadPCB_TARGET(); // "$PCB_TARGET"
//-----</ load/parse functions>---------------------------------------------
//-----<save functions>-----------------------------------------------------
/**
* Function writeError
* returns an error message wxString containing the filename being
* currently written.
*/
wxString writeError() const;
/// encapsulate the BIU formatting tricks in one place.
int biuSprintf( char* buf, BIU aValue ) const;
/**
* Function fmtBIU
* converts a BIU to engineering units by scaling and formatting to ASCII.
* This function is the complement of biuParse(). One has to know what the
* other is doing.
*/
std::string fmtBIU( BIU aValue ) const;
std::string fmtBIUPair( BIU first, BIU second ) const;
std::string fmtBIUPoint( const wxPoint& aPoint ) const
{
return fmtBIUPair( aPoint.x, aPoint.y );
}
std::string fmtBIUSize( const wxSize& aSize ) const
{
return fmtBIUPair( aSize.x, aSize.y );
}
/**
* Function fmtDEG
* formats an angle in a way particular to a board file format. This function
* is the opposite or complement of degParse(). One has to know what the
* other is doing.
*/
std::string fmtDEG( double aAngle ) const;
void saveAllSections() const;
void saveGENERAL() const;
void saveSHEET() const;
void saveSETUP() const;
void saveBOARD() const;
void saveMODULE( const MODULE* aModule ) const;
void saveMODULE_TEXT( const TEXTE_MODULE* aText ) const;
void saveMODULE_EDGE( const EDGE_MODULE* aGraphic ) const;
void savePAD( const D_PAD* aPad ) const;
void save3D( const MODULE* aModule ) const;
void saveNETINFO_ITEM( const NETINFO_ITEM* aNet ) const;
void saveNETCLASSES() const;
void saveNETCLASS( const NETCLASS* aNetclass ) const;
void savePCB_TEXT( const TEXTE_PCB* aText ) const;
void savePCB_TARGET( const PCB_TARGET* aTarget ) const;
void savePCB_LINE( const DRAWSEGMENT* aStroke ) const;
void saveDIMENTION( const DIMENSION* aDimension ) const;
void saveTRACK( const TRACK* aTrack ) const;
/**
* Function saveZONE_CONTAINER
* saves the new polygon zones.
*/
void saveZONE_CONTAINER( const ZONE_CONTAINER* aZone ) const;
//-----</save functions>----------------------------------------------------
};
#endif // LEGACY_PLUGIN_H_
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment