Skip to content

K
kicad-source-mirror
Commit 8cca89ff authored by jean-pierre charras's avatar jean-pierre charras
Browse files
Options

Pcbnew: read netlist enhancements: add option to remove single pads nets, add... 

Pcbnew: read netlist enhancements: add option to remove single pads nets, add enforce tests to report non existing netnames in zones.
Fix also some very minor errors in comments.
parent 3d40bd7e
Hide whitespace changes
Inline Side-by-side
Showing with 189 additions and 6 deletions
include/wxPcbStruct.h
View file @ 8cca89ff
......@@ -1451,6 +1451,8 @@ public:
* @param aSelectByTimestamp if true, use timestamp instead of reference to identify
* footprints from components (use after reannotation of the
* schematic)
* @param aDeleteSinglePadNets if true, remove nets counting only one pad
* and set net code to 0 for these pads
* @param aIsDryRun performs a dry run without making any changes if true.
*/
void ReadPcbNetlist( const wxString& aNetlistFileName,
......@@ -1460,6 +1462,7 @@ public:
bool aDeleteBadTracks,
bool aDeleteExtraFootprints,
bool aSelectByTimestamp,
bool aDeleteSinglePadNets,
bool aIsDryRun );
/**
......
pcbnew/class_board.cpp
View file @ 8cca89ff
......@@ -41,6 +41,7 @@
#include <msgpanel.h>
#include <netlist_reader.h>
#include <reporter.h>
#include <base_units.h>
#include <pcbnew.h>
#include <colors_selection.h>
......@@ -2332,7 +2333,8 @@ bool BOARD::NormalizeAreaPolygon( PICKED_ITEMS_LIST * aNewZonesList, ZONE_CONTAI
}
void BOARD::ReplaceNetlist( NETLIST& aNetlist, REPORTER* aReporter )
void BOARD::ReplaceNetlist( NETLIST& aNetlist, bool aDeleteSinglePadNets,
REPORTER* aReporter )
{
unsigned i;
wxPoint bestPosition;
......@@ -2603,7 +2605,53 @@ void BOARD::ReplaceNetlist( NETLIST& aNetlist, REPORTER* aReporter )
}
}
// Last step: verify all pads found in netlist:
// If needed, remove the single pad nets:
if( aDeleteSinglePadNets && !aNetlist.IsDryRun() )
{
BuildListOfNets();
std::vector<D_PAD*> padlist = GetPads();
// padlist is the list of pads, sorted by netname.
int count = 0;
wxString netname;
D_PAD * pad = NULL;
D_PAD * previouspad = NULL;
for( unsigned ii = 0; ii < padlist.size(); ii++ )
{
pad = padlist[ii];
if( pad->GetNetname().IsEmpty() )
continue;
if( netname != pad->GetNetname() ) // End of net
{
if( previouspad && count == 1 )
{
if( aReporter && aReporter->ReportAll() )
{
msg.Printf( _( "Remove single pad net \"%s\" on \"%s\" pad <%s>\n" ),
GetChars( pad->GetNetname() ),
GetChars( pad->GetParent()->GetReference() ),
GetChars( previouspad->GetPadName() ) );
aReporter->Report( msg );
}
previouspad->SetNetname( wxEmptyString );
}
netname = pad->GetNetname();
count = 1;
}
else
count++;
previouspad = pad;
}
// Examine last pad
if( pad && count == 1 )
pad->SetNetname( wxEmptyString );
}
// Last step: Some tests:
// verify all pads found in netlist:
// They should exist in footprints, otherwise the footprint is wrong
// note also references or time stamps are updated, so we use only
// the reference to find a footprint
......@@ -2636,5 +2684,30 @@ void BOARD::ReplaceNetlist( NETLIST& aNetlist, REPORTER* aReporter )
}
}
}
// Verify zone net names validity:
// After schematic changes, a zone can have a non existing net name.
// It should be reported
if( aReporter && aReporter->ReportErrors() )
{
//Loop through all copper zones
for( i = 0; i < m_ZoneDescriptorList.size(); i++ )
{
ZONE_CONTAINER* zone = m_ZoneDescriptorList[i];
if( zone->GetNet() >= 0 || !zone->IsOnCopperLayer() )
continue;
// Net name not valid, report error
wxString coord;
coord << zone->GetPosition();
msg.Printf( _( "** Error: Zone %s layer <%s>"
" has non-existent net name \"%s\" **\n" ),
GetChars( coord ),
GetChars( zone->GetLayerName() ),
GetChars( zone->GetNetName() ) );
aReporter->Report( msg );
}
}
}
pcbnew/class_board.h
View file @ 8cca89ff
......@@ -927,10 +927,13 @@ public:
* any extra unlock footprints are removed from the #BOARD.
*
* @param aNetlist is the new netlist to revise the contents of the #BOARD with.
* @param aDeleteSinglePadNets if true, remove nets counting only one pad
* and set net code to 0 for these pads
* @param aReporter is a #REPORTER object to report the changes \a aNetlist makes to
* the #BOARD. If NULL, no change reporting occurs.
*/
void ReplaceNetlist( NETLIST& aNetlist, REPORTER* aReporter = NULL );
void ReplaceNetlist( NETLIST& aNetlist, bool aDeleteSinglePadNets,
REPORTER* aReporter = NULL );
/**
* Function ReturnSortedNetnamesList
......
pcbnew/class_netinfo.h
View file @ 8cca89ff
......@@ -197,7 +197,7 @@ private:
void clear();
/**
* Function BuildListOfNets
* Function buildListOfNets
* builds or rebuilds the list of NETINFO_ITEMs
* The list is sorted by names.
*/
......
pcbnew/class_netinfolist.cpp
View file @ 8cca89ff
......@@ -72,7 +72,7 @@ static bool padlistSortByNetnames( const D_PAD* a, const D_PAD* b )
* Be aware NETINFO_ITEM* BOARD::FindNet( const wxString& aNetname )
* when search a net by its net name does a binary search
* and expects to have a nets list sorted by an alphabetic case sensitive sort
* So do not change Build_Pads_Full_List() taht build a sorted list of pads
* So do not change Build_Pads_Full_List() which build a sorted list of pads
*/
void NETINFO_LIST::buildListOfNets()
{
......
pcbnew/dialogs/dialog_netlist.cpp
View file @ 8cca89ff
......@@ -47,6 +47,7 @@
#define NETLIST_SILENTMODE_KEY wxT("SilentMode")
#define NETLIST_FULLMESSAGES_KEY wxT("NetlistReportAllMsg")
#define NETLIST_DELETESINGLEPADNETS_KEY wxT("NetlistDeleteSinglePadNets")
void PCB_EDIT_FRAME::InstallNetlistFrame( wxDC* DC )
{
......@@ -97,6 +98,8 @@ DIALOG_NETLIST::DIALOG_NETLIST( PCB_EDIT_FRAME* aParent, wxDC * aDC,
m_config = wxGetApp().GetSettings();
m_silentMode = m_config->Read( NETLIST_SILENTMODE_KEY, 0l );
m_reportAll = m_config->Read( NETLIST_FULLMESSAGES_KEY, 1l );
bool tmp = m_config->Read( NETLIST_DELETESINGLEPADNETS_KEY, 0l );
m_rbSingleNets->SetSelection( tmp == 0 ? 0 : 1);
m_NetlistFilenameCtrl->SetValue( aNetlistFullFilename );
m_cmpNameSourceOpt->SetSelection( m_parent->GetUseCmpFileForFpNames() ? 1 : 0 );
m_checkBoxSilentMode->SetValue( m_silentMode );
......@@ -109,6 +112,8 @@ DIALOG_NETLIST::~DIALOG_NETLIST()
{
m_config->Write( NETLIST_SILENTMODE_KEY, (long) m_silentMode );
m_config->Write( NETLIST_FULLMESSAGES_KEY, (long) m_reportAll );
m_config->Write( NETLIST_DELETESINGLEPADNETS_KEY,
(long) m_rbSingleNets->GetSelection() );
}
void DIALOG_NETLIST::OnOpenNetlistClick( wxCommandEvent& event )
......@@ -187,6 +192,7 @@ void DIALOG_NETLIST::OnReadNetlistFileClick( wxCommandEvent& event )
m_DeleteBadTracks->GetSelection() == 1,
m_RemoveExtraFootprintsCtrl->GetSelection() == 1,
m_Select_By_Timestamp->GetSelection() == 1,
m_rbSingleNets->GetSelection() == 1,
m_checkDryRun->GetValue() );
}
......
pcbnew/dialogs/dialog_netlist_fbp.cpp
View file @ 8cca89ff
......@@ -74,6 +74,12 @@ DIALOG_NETLIST_FBP::DIALOG_NETLIST_FBP( wxWindow* parent, wxWindowID id, const w
bTracksSizer->Add( m_RemoveExtraFootprintsCtrl, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 5 );
wxString m_rbSingleNetsChoices[] = { _("Keep"), _("Delete") };
int m_rbSingleNetsNChoices = sizeof( m_rbSingleNetsChoices ) / sizeof( wxString );
m_rbSingleNets = new wxRadioBox( this, wxID_ANY, _("Single Pad Nets"), wxDefaultPosition, wxDefaultSize, m_rbSingleNetsNChoices, m_rbSingleNetsChoices, 1, wxRA_SPECIFY_COLS );
m_rbSingleNets->SetSelection( 0 );
bTracksSizer->Add( m_rbSingleNets, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 5 );
bnetlistOptSizer->Add( bTracksSizer, 1, wxEXPAND, 5 );
......
pcbnew/dialogs/dialog_netlist_fbp.fbp
View file @ 8cca89ff
......@@ -588,6 +588,96 @@
<event name="OnUpdateUI"></event>
</object>
</object>
<object class="sizeritem" expanded="1">
<property name="border">5</property>
<property name="flag">wxEXPAND|wxTOP|wxRIGHT|wxLEFT</property>
<property name="proportion">0</property>
<object class="wxRadioBox" expanded="1">
<property name="BottomDockable">1</property>
<property name="LeftDockable">1</property>
<property name="RightDockable">1</property>
<property name="TopDockable">1</property>
<property name="aui_layer"></property>
<property name="aui_name"></property>
<property name="aui_position"></property>
<property name="aui_row"></property>
<property name="best_size"></property>
<property name="bg"></property>
<property name="caption"></property>
<property name="caption_visible">1</property>
<property name="center_pane">0</property>
<property name="choices">&quot;Keep&quot; &quot;Delete&quot;</property>
<property name="close_button">1</property>
<property name="context_help"></property>
<property name="context_menu">1</property>
<property name="default_pane">0</property>
<property name="dock">Dock</property>
<property name="dock_fixed">0</property>
<property name="docking">Left</property>
<property name="enabled">1</property>
<property name="fg"></property>
<property name="floatable">1</property>
<property name="font"></property>
<property name="gripper">0</property>
<property name="hidden">0</property>
<property name="id">wxID_ANY</property>
<property name="label">Single Pad Nets</property>
<property name="majorDimension">1</property>
<property name="max_size"></property>
<property name="maximize_button">0</property>
<property name="maximum_size"></property>
<property name="min_size"></property>
<property name="minimize_button">0</property>
<property name="minimum_size"></property>
<property name="moveable">1</property>
<property name="name">m_rbSingleNets</property>
<property name="pane_border">1</property>
<property name="pane_position"></property>
<property name="pane_size"></property>
<property name="permission">protected</property>
<property name="pin_button">1</property>
<property name="pos"></property>
<property name="resize">Resizable</property>
<property name="selection">0</property>
<property name="show">1</property>
<property name="size"></property>
<property name="style">wxRA_SPECIFY_COLS</property>
<property name="subclass"></property>
<property name="toolbar_pane">0</property>
<property name="tooltip"></property>
<property name="validator_data_type"></property>
<property name="validator_style">wxFILTER_NONE</property>
<property name="validator_type">wxDefaultValidator</property>
<property name="validator_variable"></property>
<property name="window_extra_style"></property>
<property name="window_name"></property>
<property name="window_style"></property>
<event name="OnChar"></event>
<event name="OnEnterWindow"></event>
<event name="OnEraseBackground"></event>
<event name="OnKeyDown"></event>
<event name="OnKeyUp"></event>
<event name="OnKillFocus"></event>
<event name="OnLeaveWindow"></event>
<event name="OnLeftDClick"></event>
<event name="OnLeftDown"></event>
<event name="OnLeftUp"></event>
<event name="OnMiddleDClick"></event>
<event name="OnMiddleDown"></event>
<event name="OnMiddleUp"></event>
<event name="OnMotion"></event>
<event name="OnMouseEvents"></event>
<event name="OnMouseWheel"></event>
<event name="OnPaint"></event>
<event name="OnRadioBox"></event>
<event name="OnRightDClick"></event>
<event name="OnRightDown"></event>
<event name="OnRightUp"></event>
<event name="OnSetFocus"></event>
<event name="OnSize"></event>
<event name="OnUpdateUI"></event>
</object>
</object>
</object>
</object>
</object>
......
pcbnew/dialogs/dialog_netlist_fbp.h
View file @ 8cca89ff
......@@ -51,6 +51,7 @@ class DIALOG_NETLIST_FBP : public DIALOG_SHIM
wxRadioBox* m_ChangeExistingFootprintCtrl;
wxRadioBox* m_DeleteBadTracks;
wxRadioBox* m_RemoveExtraFootprintsCtrl;
wxRadioBox* m_rbSingleNets;
wxButton* m_buttonRead;
wxButton* m_buttonClose;
wxButton* m_buttonFPTest;
......
pcbnew/netlist.cpp
View file @ 8cca89ff
......@@ -50,6 +50,7 @@ void PCB_EDIT_FRAME::ReadPcbNetlist( const wxString& aNetlistFileName,
bool aDeleteUnconnectedTracks,
bool aDeleteExtraFootprints,
bool aSelectByTimeStamp,
bool aDeleteSinglePadNets,
bool aIsDryRun )
{
wxString msg;
......@@ -90,7 +91,7 @@ void PCB_EDIT_FRAME::ReadPcbNetlist( const wxString& aNetlistFileName,
GetScreen()->ClearUndoRedoList();
netlist.SortByReference();
GetBoard()->ReplaceNetlist( netlist, aReporter );
GetBoard()->ReplaceNetlist( netlist, aDeleteSinglePadNets, aReporter );
// If it was a dry run, nothing has changed so we're done.
if( netlist.IsDryRun() )
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment