Pcbnew: Commit patch (with very minor changes) about SVG file export with the...

Pcbnew: Commit patch (with very minor changes) about SVG file export with the layers ordered from bottom to top. ( bug 1286646 ), from Thiadmer Riemersma.

common/lset.cpp

@@ -381,6 +381,66 @@ LSEQ LSET::Seq() const
 }
 
 
+LSEQ LSET::SeqStackupBottom2Top() const
+{
+    // bottom-to-top stack-up layers
+    static const LAYER_ID sequence[] = {
+        B_Fab,
+        B_CrtYd,
+        B_Adhes,
+        B_SilkS,
+        B_Paste,
+        B_Mask,
+        B_Cu,
+        In30_Cu,
+        In29_Cu,
+        In28_Cu,
+        In27_Cu,
+        In26_Cu,
+        In25_Cu,
+        In24_Cu,
+        In23_Cu,
+        In22_Cu,
+        In21_Cu,
+        In20_Cu,
+        In19_Cu,
+        In18_Cu,
+        In17_Cu,
+        In16_Cu,
+        In15_Cu,
+        In14_Cu,
+        In13_Cu,
+        In12_Cu,
+        In11_Cu,
+        In10_Cu,
+        In9_Cu,
+        In8_Cu,
+        In7_Cu,
+        In6_Cu,
+        In5_Cu,
+        In4_Cu,
+        In3_Cu,
+        In2_Cu,
+        In1_Cu,
+        F_Cu,
+        F_Mask,
+        F_Paste,
+        F_SilkS,
+        F_Adhes,
+        F_CrtYd,
+        F_Fab,
+        Dwgs_User,
+        Cmts_User,
+        Eco1_User,
+        Eco2_User,
+        Margin,
+        Edge_Cuts,
+    };
+
+    return Seq( sequence, DIM( sequence ) );
+}
+
+
 LAYER_ID FlipLayer( LAYER_ID aLayerId )
 {
     switch( aLayerId )

include/layers_id_colors_and_visibility.h

@@ -367,11 +367,11 @@ public:
     LSEQ Seq() const;
 
     /**
-     * Function SVG
-     * returns the sequence used to output an SVG plot.
-    LSEQ SVG() const;
-     put this in the needed source file using Seq() there.
-    */
+     * Function SeqStackBottom2Top
+     * returns the sequence that is typical for a bottom-to-top stack-up.
+     * For instance, to plot multiple layers in a single image, the top layers output last.
+     */
+    LSEQ SeqStackupBottom2Top() const;
 
     /**
      * Function FmtHex

pcbnew/dialogs/dialog_SVG_print.cpp

@@ -62,10 +62,8 @@ private:
     wxCheckBox*     m_boxSelectLayer[LAYER_ID_COUNT];
     bool            m_printBW;
     wxString        m_outputDirectory;
-
-    // Static member to store options
-    static bool     m_printMirror;
-    static bool     m_oneFileOnly;
+    bool            m_printMirror;
+    bool            m_oneFileOnly;
 
     void initDialog();
 
@@ -88,7 +86,7 @@ private:
         return m_rbSvgPageSizeOpt->GetSelection() == 0;
     }
 
-    bool CreateSVGFile( const wxString& FullFileName );
+    bool CreateSVGFile( const wxString& FullFileName, bool aOnlyOneFile );
 
     LSET getCheckBoxSelectedLayers() const;
 };
@@ -97,6 +95,8 @@ private:
 
 // Keys for configuration
 #define PLOTSVGMODECOLOR_KEY        wxT( "PlotSVGModeColor" )
+#define PLOTSVGMODEMIRROR_KEY       wxT( "PlotSVGModeMirror" )
+#define PLOTSVGMODEONEFILE_KEY      wxT( "PlotSVGModeOneFile" )
 #define PLOTSVGPAGESIZEOPT_KEY      wxT( "PlotSVGPageOpt" )
 #define PLOTSVGPLOT_BRD_EDGE_KEY    wxT( "PlotSVGBrdEdge" )
 
@@ -125,9 +125,6 @@ DIALOG_SVG_PRINT::DIALOG_SVG_PRINT( wxTopLevelWindow* aParent, BOARD* aBoard, PC
     Centre();
 }
 
-bool DIALOG_SVG_PRINT::m_printMirror = false;
-bool DIALOG_SVG_PRINT::m_oneFileOnly = false;
-
 
 void DIALOG_SVG_PRINT::initDialog()
 {
@@ -136,6 +133,8 @@ void DIALOG_SVG_PRINT::initDialog()
         m_config->Read( PLOTSVGMODECOLOR_KEY, &m_printBW, false );
         long ltmp;
         m_config->Read( PLOTSVGPAGESIZEOPT_KEY, &ltmp, 0 );
+        m_config->Read( PLOTSVGMODEMIRROR_KEY, &m_printMirror, false );
+        m_config->Read( PLOTSVGMODEONEFILE_KEY, &m_oneFileOnly, false);
         m_rbSvgPageSizeOpt->SetSelection( ltmp );
         m_config->Read( PLOTSVGPLOT_BRD_EDGE_KEY, &ltmp, 1 );
         m_PrintBoardEdgesCtrl->SetValue( ltmp );
@@ -144,11 +143,7 @@ void DIALOG_SVG_PRINT::initDialog()
     m_outputDirectory = m_callers_params->GetOutputDirectory();
     m_outputDirectoryName->SetValue( m_outputDirectory );
 
-    if( m_printBW )
-        m_ModeColorOption->SetSelection( 1 );
-    else
-        m_ModeColorOption->SetSelection( 0 );
-
+    m_ModeColorOption->SetSelection( m_printBW ? 1 : 0 );
     m_printMirrorOpt->SetValue( m_printMirror );
     m_rbFileOpt->SetSelection( m_oneFileOnly ? 1 : 0 );
 
@@ -307,7 +302,7 @@ void DIALOG_SVG_PRINT::ExportSVGFile( bool aOnlyOneFile )
         if( m_PrintBoardEdgesCtrl->IsChecked() )
             m_printMaskLayer.set( Edge_Cuts );
 
-        if( CreateSVGFile( fn.GetFullPath() ) )
+        if( CreateSVGFile( fn.GetFullPath(), aOnlyOneFile ) )
         {
             m_messagesBox->AppendText(
                     wxString::Format( _( "Plot: '%s' OK\n" ), GetChars( fn.GetFullPath() ) )
@@ -327,7 +322,7 @@ void DIALOG_SVG_PRINT::ExportSVGFile( bool aOnlyOneFile )
 
 
 // Actual SVG file export  function.
-bool DIALOG_SVG_PRINT::CreateSVGFile( const wxString& aFullFileName )
+bool DIALOG_SVG_PRINT::CreateSVGFile( const wxString& aFullFileName, bool aOnlyOneFile )
 {
     PCB_PLOT_PARAMS plot_opts;
 
@@ -372,15 +367,22 @@ bool DIALOG_SVG_PRINT::CreateSVGFile( const wxString& aFullFileName )
 
     if( plotter )
     {
-        plotter->SetColorMode( m_ModeColorOption->GetSelection() == 0 );
-        PlotStandardLayer( m_board, plotter, m_printMaskLayer, plot_opts );
+        plotter->SetColorMode( !m_printBW );
+        if( aOnlyOneFile )
+        {
+            for( LSEQ seq = m_printMaskLayer.SeqStackupBottom2Top();  seq;  ++seq )
+                PlotOneBoardLayer( m_board, plotter, *seq, plot_opts );
+        }
+        else
+        {
+            PlotStandardLayer( m_board, plotter, m_printMaskLayer, plot_opts );
+        }
         plotter->EndPlot();
     }
 
     delete plotter;
 
-    m_board->SetAuxOrigin( axisorigin );        // really, without a message saying so?
-
+    m_board->SetAuxOrigin( axisorigin );        // reset to the values saved earlier
     m_board->SetPageSettings( pageInfo );
 
     return true;
@@ -410,10 +412,9 @@ void DIALOG_SVG_PRINT::OnCloseWindow( wxCloseEvent& event )
         m_printBW = m_ModeColorOption->GetSelection();
         m_oneFileOnly = m_rbFileOpt->GetSelection() == 1;
 
-        // 1) Why is configuration data saved in two places: m_config and PCB_PLOT_OPTIONS?
-        // 2) Why are SVG layer choices co-mingled with other plot layer choices in the config file?
-        //    The string OPTKEY_LAYERBASE is used in multiple places.
-        // fix these.
+        // Why are SVG layer choices co-mingled with other plot layer choices in the config file?
+        // The string OPTKEY_LAYERBASE is used in multiple places.
+        // fix this.
 
         wxString dirStr = m_outputDirectoryName->GetValue();
         dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
@@ -423,6 +424,8 @@ void DIALOG_SVG_PRINT::OnCloseWindow( wxCloseEvent& event )
         if( m_config )
         {
             m_config->Write( PLOTSVGMODECOLOR_KEY, m_printBW );
+            m_config->Write( PLOTSVGMODEMIRROR_KEY, m_printMirror );
+            m_config->Write( PLOTSVGMODEONEFILE_KEY, m_oneFileOnly );
             m_config->Write( PLOTSVGPAGESIZEOPT_KEY, m_rbSvgPageSizeOpt->GetSelection() );
             m_config->Write( PLOTSVGPLOT_BRD_EDGE_KEY, m_PrintBoardEdgesCtrl->GetValue() );
 

pcbnew/dialogs/dialog_SVG_print_base.cpp

@@ -89,6 +89,8 @@ DIALOG_SVG_PRINT_base::DIALOG_SVG_PRINT_base( wxWindow* parent, wxWindowID id, c
 	sbOptionsSizer->Add( m_PrintBoardEdgesCtrl, 0, wxBOTTOM|wxRIGHT|wxLEFT, 5 );
 	
 	m_printMirrorOpt = new wxCheckBox( this, wxID_ANY, _("Print mirrored"), wxDefaultPosition, wxDefaultSize, 0 );
+	m_printMirrorOpt->SetToolTip( _("Print the layer(s) horizontally mirrored") );
+	
 	sbOptionsSizer->Add( m_printMirrorOpt, 0, wxRIGHT|wxLEFT, 5 );
 	
 	

pcbnew/dialogs/dialog_SVG_print_base.fbp

@@ -925,7 +925,7 @@
                                         <property name="style"></property>
                                         <property name="subclass"></property>
                                         <property name="toolbar_pane">0</property>
-                                        <property name="tooltip"></property>
+                                        <property name="tooltip">Print the layer(s) horizontally mirrored</property>
                                         <property name="validator_data_type"></property>
                                         <property name="validator_style">wxFILTER_NONE</property>
                                         <property name="validator_type">wxDefaultValidator</property>

pcbnew/pcbplot.cpp

@@ -334,7 +334,7 @@ bool PLOT_CONTROLLER::PlotLayer( LAYER_NUM aLayer )
         return false;
 
     // Fully delegated to the parent
-    PlotOneBoardLayer( m_board, m_plotter, aLayer, m_plotOpts );
+    PlotOneBoardLayer( m_board, m_plotter, ToLAYER_ID( aLayer ), m_plotOpts );
 
     return true;
 }

pcbnew/pcbplot.h

@@ -176,7 +176,7 @@ PLOTTER* StartPlotBoard( BOARD* aBoard,
  * @param aLayer = the layer id to plot
  * @param aPlotOpt = the plot options (files, sketch). Has meaning for some formats only
  */
-void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_NUM aLayer,
+void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_ID aLayer,
                         const PCB_PLOT_PARAMS& aPlotOpt );
 
 /**

pcbnew/plot_board_layers.cpp

@@ -142,7 +142,7 @@ void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, LSET aLayerMask,
     }
 }
 
-void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_NUM aLayer,
+void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_ID aLayer,
                      const PCB_PLOT_PARAMS& aPlotOpt )
 {
     PCB_PLOT_PARAMS plotOpt = aPlotOpt;
@@ -154,7 +154,7 @@ void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_NUM aLayer,
 
     // Specify that the contents of the "Edges Pcb" layer are to be plotted
     // in addition to the contents of the currently specified layer.
-    LSET    layer_mask( ToLAYER_ID( aLayer ) );
+    LSET    layer_mask( aLayer );
 
     if( !aPlotOpt.GetExcludeEdgeLayer() )
         layer_mask.set( Edge_Cuts );