Skip to content

K
kicad-source-mirror
Commit 8031e512 authored by jean-pierre charras's avatar jean-pierre charras
Browse files
Options

Dialog drill file: remove precision choice, because only one choice was acceptable 

(the option with the smallest number of digits for coordinates created unacceptable truncation coordinates in Excellon drill files)
parent c41bb774
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 111 additions and 128 deletions
pcbnew/dialogs/dialog_gendrill.cpp
View file @ 8031e512
......@@ -51,18 +51,9 @@
// list of allowed precision for EXCELLON files, for integer format:
// Due to difference between inches and mm,
// there are 2 set of reasonnable precision values, one for inches and one for metric
static DRILL_PRECISION precisionListForInches[] =
{
DRILL_PRECISION( 2, 3 ), DRILL_PRECISION( 2, 4 )
};
static DRILL_PRECISION precisionListForMetric[] =
{
DRILL_PRECISION( 3, 2 ), DRILL_PRECISION( 3, 3 )
};
// there are 2 precision values, one for inches and one for metric
static DRILL_PRECISION precisionListForInches( 2, 4 );
static DRILL_PRECISION precisionListForMetric( 3, 3 );
/* This function displays the dialog frame for drill tools
......@@ -96,7 +87,6 @@ int DIALOG_GENDRILL::m_ZerosFormat = EXCELLON_WRITER::DECIMAL_FORMAT;
bool DIALOG_GENDRILL::m_MinimalHeader = false;
bool DIALOG_GENDRILL::m_Mirror = false;
bool DIALOG_GENDRILL::m_DrillOriginIsAuxAxis = false;
int DIALOG_GENDRILL::m_PrecisionFormat = 1;
int DIALOG_GENDRILL::m_mapFileType = 1;
......@@ -109,7 +99,6 @@ DIALOG_GENDRILL::~DIALOG_GENDRILL()
void DIALOG_GENDRILL::initDialog()
{
m_config->Read( ZerosFormatKey, &DIALOG_GENDRILL::m_ZerosFormat );
m_config->Read( PrecisionKey, &DIALOG_GENDRILL::m_PrecisionFormat );
m_config->Read( MirrorKey, &DIALOG_GENDRILL::m_Mirror );
m_config->Read( MinimalHeaderKey, &DIALOG_GENDRILL::m_MinimalHeader );
m_config->Read( UnitDrillInchKey, &DIALOG_GENDRILL::m_UnitDrillIsInch );
......@@ -124,12 +113,8 @@ void DIALOG_GENDRILL::InitDisplayParams()
wxString msg;
m_Choice_Unit->SetSelection( m_UnitDrillIsInch ? 1 : 0 );
m_Choice_Precision->SetSelection( m_PrecisionFormat );
m_Choice_Zeros_Format->SetSelection( m_ZerosFormat );
if( m_ZerosFormat == EXCELLON_WRITER::DECIMAL_FORMAT )
m_Choice_Precision->Enable( false );
UpdatePrecisionOptions();
m_Check_Minimal->SetValue( m_MinimalHeader );
......@@ -228,7 +213,6 @@ void DIALOG_GENDRILL::UpdateConfig()
SetParams();
m_config->Write( ZerosFormatKey, m_ZerosFormat );
m_config->Write( PrecisionKey, m_PrecisionFormat );
m_config->Write( MirrorKey, m_Mirror );
m_config->Write( MinimalHeaderKey, m_MinimalHeader );
m_config->Write( UnitDrillInchKey, m_UnitDrillIsInch );
......@@ -268,22 +252,17 @@ void DIALOG_GENDRILL::OnSelZerosFmtSelected( wxCommandEvent& event )
void DIALOG_GENDRILL::UpdatePrecisionOptions()
{
if( m_Choice_Unit->GetSelection()== 1 ) // Units = inches
{
// inch options
m_Choice_Precision->SetString( 0, precisionListForInches[0].GetPrecisionString() );
m_Choice_Precision->SetString( 1, precisionListForInches[1].GetPrecisionString() );
}
m_staticTextPrecision->SetLabel( precisionListForInches.GetPrecisionString() );
else
{
// metric options
m_Choice_Precision->SetString( 0, precisionListForMetric[0].GetPrecisionString() );
m_Choice_Precision->SetString( 1, precisionListForMetric[1].GetPrecisionString() );
m_staticTextPrecision->SetLabel( precisionListForMetric.GetPrecisionString() );
}
if( m_Choice_Zeros_Format->GetSelection() == EXCELLON_WRITER::DECIMAL_FORMAT )
m_Choice_Precision->Enable( false );
m_staticTextPrecision->Enable( false );
else
m_Choice_Precision->Enable( true );
m_staticTextPrecision->Enable( true );
}
void DIALOG_GENDRILL::OnOutputDirectoryBrowseClicked( wxCommandEvent& event )
......@@ -339,20 +318,16 @@ void DIALOG_GENDRILL::SetParams()
m_Mirror = m_Check_Mirror->IsChecked();
m_ZerosFormat = m_Choice_Zeros_Format->GetSelection();
m_DrillOriginIsAuxAxis = m_Choice_Drill_Offset->GetSelection();
m_PrecisionFormat = m_Choice_Precision->GetSelection();
if( m_Choice_Drill_Offset->GetSelection() == 0 )
m_FileDrillOffset = wxPoint( 0, 0 );
else
m_FileDrillOffset = m_parent->GetOriginAxisPosition();
// get precision
int idx = m_Choice_Precision->GetSelection();
if( m_UnitDrillIsInch )
m_Precision = precisionListForInches[idx];
m_Precision = precisionListForInches;
else
m_Precision = precisionListForMetric[idx];
m_Precision = precisionListForMetric;
m_board->SetPlotOptions( m_plotOpts );
}
......
pcbnew/dialogs/dialog_gendrill.h
View file @ 8031e512
......@@ -39,7 +39,6 @@ public:
static int m_UnitDrillIsInch;
static int m_ZerosFormat;
static int m_PrecisionFormat;
static bool m_MinimalHeader;
static bool m_Mirror;
static bool m_DrillOriginIsAuxAxis; /* Axis selection (main / auxiliary)
......
pcbnew/dialogs/dialog_gendrill_base.cpp
View file @ 8031e512
......@@ -54,13 +54,15 @@ DIALOG_GENDRILL_BASE::DIALOG_GENDRILL_BASE( wxWindow* parent, wxWindowID id, con
m_LeftBoxSizer->Add( m_Choice_Zeros_Format, 0, wxALL|wxEXPAND, 5 );
wxString m_Choice_PrecisionChoices[] = { _("2:3"), _("2:4") };
int m_Choice_PrecisionNChoices = sizeof( m_Choice_PrecisionChoices ) / sizeof( wxString );
m_Choice_Precision = new wxRadioBox( this, wxID_ANY, _("Precision"), wxDefaultPosition, wxDefaultSize, m_Choice_PrecisionNChoices, m_Choice_PrecisionChoices, 1, wxRA_SPECIFY_COLS );
m_Choice_Precision->SetSelection( 1 );
m_Choice_Precision->SetToolTip( _("Choose EXCELLON numbers precision") );
wxStaticBoxSizer* sbSizerPrecision;
sbSizerPrecision = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Precision") ), wxVERTICAL );
m_LeftBoxSizer->Add( m_Choice_Precision, 0, wxALL|wxEXPAND, 5 );
m_staticTextPrecision = new wxStaticText( this, wxID_ANY, _("Precision"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticTextPrecision->Wrap( -1 );
sbSizerPrecision->Add( m_staticTextPrecision, 0, wxALL, 5 );
m_LeftBoxSizer->Add( sbSizerPrecision, 0, wxEXPAND, 5 );
bmiddlerSizer->Add( m_LeftBoxSizer, 0, wxEXPAND, 5 );
......@@ -166,10 +168,10 @@ DIALOG_GENDRILL_BASE::DIALOG_GENDRILL_BASE( wxWindow* parent, wxWindowID id, con
bSizerButtons->Add( m_buttonDrill, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
m_buttonMap = new wxButton( this, wxID_ANY, _("Map File"), wxDefaultPosition, wxDefaultSize, 0 );
bSizerButtons->Add( m_buttonMap, 0, wxALL, 5 );
bSizerButtons->Add( m_buttonMap, 0, wxALL|wxEXPAND, 5 );
m_buttonReport = new wxButton( this, wxID_ANY, _("Report File"), wxDefaultPosition, wxDefaultSize, 0 );
bSizerButtons->Add( m_buttonReport, 0, wxALL, 5 );
bSizerButtons->Add( m_buttonReport, 0, wxALL|wxEXPAND, 5 );
m_CancelButton = new wxButton( this, wxID_CANCEL, _("Close"), wxDefaultPosition, wxDefaultSize, 0 );
bSizerButtons->Add( m_CancelButton, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxEXPAND, 5 );
......
pcbnew/dialogs/dialog_gendrill_base.fbp
View file @ 8031e512
This diff is collapsed.
pcbnew/dialogs/dialog_gendrill_base.h
View file @ 8031e512
......@@ -22,8 +22,8 @@
#include <wx/sizer.h>
#include <wx/statbox.h>
#include <wx/radiobox.h>
#include <wx/checkbox.h>
#include <wx/stattext.h>
#include <wx/checkbox.h>
#include <wx/dialog.h>
///////////////////////////////////////////////////////////////////////////
......@@ -42,7 +42,7 @@ class DIALOG_GENDRILL_BASE : public DIALOG_SHIM
wxButton* m_buttonBrowse;
wxRadioBox* m_Choice_Unit;
wxRadioBox* m_Choice_Zeros_Format;
wxRadioBox* m_Choice_Precision;
wxStaticText* m_staticTextPrecision;
wxRadioBox* m_Choice_Drill_Map;
wxCheckBox* m_Check_Mirror;
wxCheckBox* m_Check_Minimal;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment