Code cleanup. Minor fixes. Added drag labels patch from Marco Mattila

common/drawframe.cpp

@@ -423,6 +423,8 @@ void WinEDA_DrawFrame::SetToolID( int id, int new_cursor_id,
         m_VToolBar->ToggleTool( ID_NO_SELECT_BUTT, TRUE );
 
     m_ID_current_state = id;
+    if( m_VToolBar )
+        m_VToolBar->Refresh( );
 }
 
 

eeschema/block.cpp

@@ -605,23 +605,10 @@ static void CollectStructsToDrag( SCH_SCREEN* screen )
     for( Struct = screen->EEDrawList; Struct != NULL; Struct = Struct->Next() )
         Struct->m_Flags = 0;
 
-    // Sel .m_Flags to selected for a wire or bus in selected area if there is
-    // only one item:
-    if( pickedlist->GetCount() == 1 )
-    {
-        Struct = (SCH_ITEM*) pickedlist->GetPickedItem( 0 );
-        if( Struct->Type() == DRAW_SEGMENT_STRUCT_TYPE )
-            Struct->m_Flags = SELECTED;
-    }
-    // Sel .m_Flags to selected for a wire or bus in selected area for a list
-    // of items:
-    else
+    for( unsigned ii = 0; ii < pickedlist->GetCount(); ii++ )
     {
-        for( unsigned ii = 0; ii < pickedlist->GetCount(); ii++ )
-        {
-            Struct = (SCH_ITEM*) pickedlist->GetPickedItem( ii );
-            Struct->m_Flags = SELECTED;
-        }
+        Struct = (SCH_ITEM*) pickedlist->GetPickedItem( ii );
+        Struct->m_Flags = SELECTED;
     }
 
     if( screen->m_BlockLocate.m_Command != BLOCK_DRAG )
@@ -653,6 +640,18 @@ static void CollectStructsToDrag( SCH_SCREEN* screen )
     for( unsigned ii = 0; ii < pickedlist->GetCount(); ii++ )
     {
         Struct = (SCH_ITEM*) (SCH_ITEM*) pickedlist->GetPickedItem( ii );
+    if( ( Struct->Type() == TYPE_SCH_LABEL )
+        || ( Struct->Type() == TYPE_SCH_GLOBALLABEL )
+        || ( Struct->Type() == TYPE_SCH_HIERLABEL ) )
+    {
+            #undef STRUCT
+            #define STRUCT ( (SCH_TEXT*) Struct )
+        if( !screen->m_BlockLocate.Inside( STRUCT->m_Pos ) )
+        {
+            AddPickedItem( screen, STRUCT->m_Pos );
+        }
+    }
+
         if( Struct->Type() == TYPE_SCH_COMPONENT )
         {
             // Add all pins of the selected component to list

eeschema/dangling_ends.cpp

@@ -54,42 +54,21 @@ void               TestLabelForDangling( SCH_TEXT*              label,
 DanglingEndHandle* RebuildEndList( EDA_BaseStruct* DrawList );
 
 
-/* Returns TRUE if the point P is on the segment S.
- * The segment is assumed horizontal or vertical.
- */
-bool SegmentIntersect( int Sx1, int Sy1, int Sx2, int Sy2,
-                       int Px1, int Py1 )
+/* Returns true if the point P is on the segment S. */
+bool SegmentIntersect( wxPoint aSegStart, wxPoint aSegEnd, wxPoint aTestPoint )
 {
-    int Sxmin, Sxmax, Symin, Symax;
-
-    if( Sx1 == Sx2 )          /* Line S is vertical. */
-    {
-        Symin = MIN( Sy1, Sy2 );
-        Symax = MAX( Sy1, Sy2 );
+    wxPoint vectSeg = aSegEnd - aSegStart;  // Vector from S1 to S2
+    wxPoint vectPoint = aTestPoint - aSegStart; // Vector from S1 to P
 
-        if( Px1 != Sx1 )
-            return FALSE;
+    // Use long long here to avoid overflow in calculations
+    if( (long long)vectSeg.x * vectPoint.y - (long long)vectSeg.y * vectPoint.x )
+        return false;        /* Cross product non-zero, vectors not parallel */
 
-        if( Py1 >= Symin  &&  Py1 <= Symax )
-            return TRUE;
-        else
-            return FALSE;
-    }
-    else if( Sy1 == Sy2 )    /* Line S is horizontal. */
-    {
-        Sxmin = MIN( Sx1, Sx2 );
-        Sxmax = MAX( Sx1, Sx2 );
+    if( ((long long)vectSeg.x * vectPoint.x + (long long)vectSeg.y * vectPoint.y) <
+        ((long long)vectPoint.x * vectPoint.x + (long long)vectPoint.y * vectPoint.y) )
+        return false;          /* Point not on segment */
 
-        if( Py1 != Sy1 )
-            return FALSE;
-
-        if( Px1 >= Sxmin && Px1 <= Sxmax )
-            return TRUE;
-        else
-            return FALSE;
-    }
-    else
-        return FALSE;
+    return true;
 }
 
 
@@ -133,7 +112,7 @@ void WinEDA_SchematicFrame::TestDanglingEnds( SCH_ITEM* DrawList, wxDC* DC )
                 break;
             if( STRUCT->GetLayer() == LAYER_BUS )
             {
-                STRUCT->m_StartIsDangling = STRUCT->m_EndIsDangling = FALSE;
+                STRUCT->m_StartIsDangling = STRUCT->m_EndIsDangling = false;
                 break;
             }
             break;
@@ -168,9 +147,9 @@ LIB_PIN* WinEDA_SchematicFrame::LocatePinEnd( SCH_ITEM*      DrawList,
         NEGATE( pinpos.y );     // In libraries Y axis is bottom to top
                                 // and in schematic Y axis is top to bottom
 
-    else    // calculate the pin position in schematic
+    else                        // calculate the pin position in schematic
         pinpos = TransformCoordinate( DrawLibItem->m_Transform, pinpos )
-                + DrawLibItem->m_Pos;
+                 + DrawLibItem->m_Pos;
 
     if( pos == pinpos )
         return Pin;
@@ -182,7 +161,7 @@ void TestWireForDangling( SCH_LINE* DrawRef, WinEDA_SchematicFrame* frame,
                           wxDC* DC )
 {
     DanglingEndHandle* terminal_item;
-    bool Sdangstate = TRUE, Edangstate = TRUE;
+    bool Sdangstate = true, Edangstate = true;
 
     for( terminal_item = ItemList; terminal_item != NULL;
          terminal_item = terminal_item->m_Pnext )
@@ -192,13 +171,13 @@ void TestWireForDangling( SCH_LINE* DrawRef, WinEDA_SchematicFrame* frame,
 
         if( (DrawRef->m_Start.x == terminal_item->m_Pos.x)
            && (DrawRef->m_Start.y == terminal_item->m_Pos.y) )
-            Sdangstate = FALSE;
+            Sdangstate = false;
 
         if( (DrawRef->m_End.x == terminal_item->m_Pos.x)
            && (DrawRef->m_End.y == terminal_item->m_Pos.y) )
-            Edangstate = FALSE;
+            Edangstate = false;
 
-        if( (Sdangstate == FALSE) && (Edangstate == FALSE) )
+        if( (Sdangstate == false) && (Edangstate == false) )
             break;
     }
 
@@ -220,7 +199,7 @@ void TestLabelForDangling( SCH_TEXT* label, WinEDA_SchematicFrame* frame,
                            wxDC* DC )
 {
     DanglingEndHandle* terminal_item;
-    bool dangstate = TRUE;
+    bool dangstate = true;
 
     for( terminal_item = ItemList; terminal_item != NULL;
          terminal_item = terminal_item->m_Pnext )
@@ -235,16 +214,14 @@ void TestLabelForDangling( SCH_TEXT* label, WinEDA_SchematicFrame* frame,
         case SHEET_LABEL_END:
             if( ( label->m_Pos.x == terminal_item->m_Pos.x )
                && ( label->m_Pos.y == terminal_item->m_Pos.y ) )
-                dangstate = FALSE;
+                dangstate = false;
             break;
 
         case WIRE_START_END:
         case BUS_START_END:
-            dangstate = !SegmentIntersect( terminal_item->m_Pos.x,
-                                           terminal_item->m_Pos.y,
-                                           terminal_item->m_Pnext->m_Pos.x,
-                                           terminal_item->m_Pnext->m_Pos.y,
-                                           label->m_Pos.x, label->m_Pos.y );
+            dangstate = !SegmentIntersect( terminal_item->m_Pos,
+                                           terminal_item->m_Pnext->m_Pos,
+                                           label->m_Pos );
             terminal_item = terminal_item->m_Pnext;
             break;
 
@@ -256,7 +233,7 @@ void TestLabelForDangling( SCH_TEXT* label, WinEDA_SchematicFrame* frame,
             break;
         }
 
-        if( dangstate == FALSE )
+        if( dangstate == false )
             break;
     }
 
@@ -322,7 +299,7 @@ DanglingEndHandle* RebuildEndList( EDA_BaseStruct* DrawList )
                || (STRUCT->GetLayer() == LAYER_WIRE ) )
             {
                 item = new DanglingEndHandle(
-                     (STRUCT->GetLayer() == LAYER_BUS) ?
+                    (STRUCT->GetLayer() == LAYER_BUS) ?
                     BUS_START_END : WIRE_START_END );
 
                 item->m_Item = DrawItem;
@@ -334,7 +311,7 @@ DanglingEndHandle* RebuildEndList( EDA_BaseStruct* DrawList )
                 lastitem = item;
                 item     =
                     new DanglingEndHandle( (STRUCT->GetLayer() == LAYER_BUS) ?
-                                           BUS_END_END : WIRE_END_END );
+                                          BUS_END_END : WIRE_END_END );
 
                 item->m_Item = DrawItem;
                 item->m_Pos  = STRUCT->m_End;
@@ -387,7 +364,7 @@ DanglingEndHandle* RebuildEndList( EDA_BaseStruct* DrawList )
                 break;
 
             for( LIB_PIN* Pin = Entry->GetNextPin(); Pin != NULL;
-                 Pin = Entry->GetNextPin( Pin ) )
+                Pin = Entry->GetNextPin( Pin ) )
             {
                 wxASSERT( Pin->Type() == COMPONENT_PIN_DRAW_TYPE );
 
@@ -417,8 +394,7 @@ DanglingEndHandle* RebuildEndList( EDA_BaseStruct* DrawList )
         {
             SCH_SHEET* sheet = (SCH_SHEET*) DrawItem;
 
-            BOOST_FOREACH( SCH_SHEET_PIN pinsheet, sheet->GetSheetPins() )
-            {
+            BOOST_FOREACH( SCH_SHEET_PIN pinsheet, sheet->GetSheetPins() ) {
                 wxASSERT( pinsheet.Type() == DRAW_HIERARCHICAL_PIN_SHEET_STRUCT_TYPE );
 
                 item = new DanglingEndHandle( SHEET_LABEL_END );

eeschema/hotkeys.cpp

@@ -386,14 +386,16 @@ void WinEDA_SchematicFrame::OnHotKey( wxDC* DC, int hotkey,
         break;
 
     case HK_ADD_LABEL:
-        // switch to m_ID_current_state = ID_LABEL_BUTT;
-        if( m_ID_current_state != ID_LABEL_BUTT )
-            SetToolID( ID_LABEL_BUTT, wxCURSOR_PENCIL, _( "Add Label" ) );
-        OnLeftClick( DC, MousePos );
-        break;
+        if( !ItemInEdit )
+        {
+            // switch to m_ID_current_state = ID_LABEL_BUTT;
+            if( m_ID_current_state != ID_LABEL_BUTT )
+                SetToolID( ID_LABEL_BUTT, wxCURSOR_PENCIL, _( "Add Label" ) );
+            OnLeftClick( DC, MousePos );
+        }
+         break;
 
     case HK_BEGIN_WIRE:
-
         /* An item is selected. If edited and not a wire, a new command is not
          * possible */
         if( !ItemInEdit && screen->m_BlockLocate.m_State == STATE_NO_BLOCK )
@@ -578,10 +580,13 @@ void WinEDA_SchematicFrame::OnHotKey( wxDC* DC, int hotkey,
                 wxPostEvent( this, eventMoveOrDragComponent );
                 break;
 
-            case TYPE_SCH_TEXT:
             case TYPE_SCH_LABEL:
             case TYPE_SCH_GLOBALLABEL:
             case TYPE_SCH_HIERLABEL:
+                wxPostEvent( this, eventMoveOrDragComponent );
+            break;
+
+            case TYPE_SCH_TEXT:
             case DRAW_PART_TEXT_STRUCT_TYPE:
             case DRAW_BUSENTRY_STRUCT_TYPE:
                 if( HK_Descr->m_Idcommand != HK_DRAG )

eeschema/netlist.cpp

@@ -1031,9 +1031,7 @@ static void SegmentToPointConnect( NETLIST_OBJECT* Jonction,
                 continue;
         }
 
-        if( SegmentIntersect( Segment->m_Start.x, Segment->m_Start.y,
-                              Segment->m_End.x, Segment->m_End.y,
-                              Jonction->m_Start.x, Jonction->m_Start.y ) )
+        if( SegmentIntersect( Segment->m_Start, Segment->m_End, Jonction->m_Start ) )
         {
             /* Propagation Netcode has all the objects of the same Netcode. */
             if( IsBus == 0 )

eeschema/onrightclick.cpp

@@ -342,6 +342,9 @@ void AddMenusForGLabel( wxMenu* PopMenu, SCH_GLOBALLABEL* GLabel )
         msg = AddHotkeyName( _( "Move Global Label" ), s_Schematic_Hokeys_Descr,
                              HK_MOVE_COMPONENT_OR_ITEM );
         ADD_MENUITEM( PopMenu, ID_POPUP_SCH_MOVE_ITEM_REQUEST, msg, move_text_xpm );
+        msg = AddHotkeyName( _( "Drag Global Label" ), s_Schematic_Hokeys_Descr,
+                             HK_DRAG );
+        ADD_MENUITEM( PopMenu, ID_POPUP_SCH_DRAG_CMP_REQUEST, msg, move_text_xpm );
         msg = AddHotkeyName( _( "Copy Global Label" ), s_Schematic_Hokeys_Descr,
                              HK_COPY_COMPONENT_OR_LABEL );
         ADD_MENUITEM( PopMenu, ID_POPUP_SCH_COPY_ITEM, msg, copy_button );
@@ -376,6 +379,9 @@ void AddMenusForHLabel( wxMenu* PopMenu, SCH_HIERLABEL* HLabel )
         msg = AddHotkeyName( _( "Move Hierarchical Label" ), s_Schematic_Hokeys_Descr,
                              HK_MOVE_COMPONENT_OR_ITEM );
         ADD_MENUITEM( PopMenu, ID_POPUP_SCH_MOVE_ITEM_REQUEST, msg, move_text_xpm );
+        msg = AddHotkeyName( _( "Drag Hierarchical Label" ), s_Schematic_Hokeys_Descr,
+                             HK_DRAG );
+        ADD_MENUITEM( PopMenu, ID_POPUP_SCH_DRAG_CMP_REQUEST, msg, move_text_xpm );
         msg = AddHotkeyName( _( "Copy Hierarchical Label" ), s_Schematic_Hokeys_Descr,
                              HK_COPY_COMPONENT_OR_LABEL );
         ADD_MENUITEM( PopMenu, ID_POPUP_SCH_COPY_ITEM, msg, copy_button );
@@ -409,6 +415,9 @@ void AddMenusForLabel( wxMenu* PopMenu, SCH_LABEL* Label )
         msg = AddHotkeyName( _( "Move Label" ), s_Schematic_Hokeys_Descr,
                              HK_MOVE_COMPONENT_OR_ITEM );
         ADD_MENUITEM( PopMenu, ID_POPUP_SCH_MOVE_ITEM_REQUEST, msg, move_text_xpm );
+        msg = AddHotkeyName( _( "Drag Label" ), s_Schematic_Hokeys_Descr,
+                             HK_DRAG );
+        ADD_MENUITEM( PopMenu, ID_POPUP_SCH_DRAG_CMP_REQUEST, msg, move_text_xpm );
         msg = AddHotkeyName( _( "Copy Label" ), s_Schematic_Hokeys_Descr,
                              HK_COPY_COMPONENT_OR_LABEL );
         ADD_MENUITEM( PopMenu, ID_POPUP_SCH_COPY_ITEM, msg, copy_button );
@@ -523,7 +532,8 @@ void AddMenusForWire( wxMenu* PopMenu, SCH_LINE* Wire, WinEDA_SchematicFrame* fr
     PopMenu->AppendSeparator();
 
     ADD_MENUITEM( PopMenu, ID_POPUP_SCH_ADD_JUNCTION, _( "Add Junction" ), add_junction_xpm );
-    ADD_MENUITEM( PopMenu, ID_POPUP_SCH_ADD_LABEL, _( "Add Label" ), add_line_label_xpm );
+    msg = AddHotkeyName( _( "Add Label" ), s_Schematic_Hokeys_Descr, HK_ADD_LABEL );
+    ADD_MENUITEM( PopMenu, ID_POPUP_SCH_ADD_LABEL, msg, add_line_label_xpm );
 
     // Add global label command only if the cursor is over one end of the wire.
     if( ( pos.x == Wire->m_Start.x && pos.y == Wire->m_Start.y)

eeschema/plot.cpp

@@ -17,9 +17,7 @@
 #include "class_pin.h"
 
 
-/* Local Variables : */
-static void Plot_Hierarchical_PIN_Sheet( PLOTTER* plotter,
-                                         SCH_SHEET_PIN* Struct );
+/* Local functions : */
 static void PlotTextField( PLOTTER* plotter, SCH_COMPONENT* DrawLibItem,
                            int FieldNumber, bool IsMulti, int DrawMode );
 
@@ -304,46 +302,6 @@ static void PlotTextStruct( PLOTTER* plotter, SCH_TEXT* aSchText )
 }
 
 
-static void Plot_Hierarchical_PIN_Sheet( PLOTTER*       plotter,
-                                         SCH_SHEET_PIN* aHierarchical_PIN )
-{
-    EDA_Colors txtcolor = UNSPECIFIED_COLOR;
-    int        posx, tposx, posy, size;
-
-    static std::vector <wxPoint> Poly;
-
-    txtcolor = ReturnLayerColor( aHierarchical_PIN->GetLayer() );
-
-    posx = aHierarchical_PIN->m_Pos.x;
-    posy = aHierarchical_PIN->m_Pos.y;
-    size = aHierarchical_PIN->m_Size.x;
-    GRTextHorizJustifyType side;
-    if( aHierarchical_PIN->m_Edge )
-    {
-        tposx = posx - size;
-        side  = GR_TEXT_HJUSTIFY_RIGHT;
-    }
-    else
-    {
-        tposx = posx + size + (size / 8);
-        side  = GR_TEXT_HJUSTIFY_LEFT;
-    }
-
-    int thickness = aHierarchical_PIN->GetPenSize();
-    plotter->set_current_line_width( thickness );
-
-    plotter->text( wxPoint( tposx, posy ), txtcolor, aHierarchical_PIN->m_Text,
-                   TEXT_ORIENT_HORIZ, wxSize( size, size ),
-                   side, GR_TEXT_VJUSTIFY_CENTER, thickness,
-                   aHierarchical_PIN->m_Italic, aHierarchical_PIN->m_Bold );
-
-    /* Draw the associated graphic symbol */
-    aHierarchical_PIN->CreateGraphicShape( Poly, aHierarchical_PIN->m_Pos );
-
-    plotter->poly( Poly.size(), &Poly[0].x, NO_FILL );
-}
-
-
 static void PlotSheetStruct( PLOTTER* plotter, SCH_SHEET* Struct )
 {
     EDA_Colors txtcolor = UNSPECIFIED_COLOR;
@@ -399,9 +357,9 @@ static void PlotSheetStruct( PLOTTER* plotter, SCH_SHEET* Struct )
     plotter->set_color( ReturnLayerColor( Struct->m_Layer ) );
 
     /* Draw texts : SheetLabel */
-    BOOST_FOREACH( SCH_SHEET_PIN& label, Struct->GetSheetPins() )
+    BOOST_FOREACH( SCH_SHEET_PIN& pin_sheet, Struct->GetSheetPins() )
     {
-        label.Plot( plotter );
+        pin_sheet.Plot( plotter );
     }
 }
 

eeschema/protos.h

@@ -31,7 +31,7 @@ wxString DataBaseGetName( WinEDA_DrawFrame* frame, wxString& Keys,
 /*********************/
 /* DANGLING_ENDS.CPP */
 /*********************/
-bool SegmentIntersect( int Sx1, int Sy1, int Sx2, int Sy2, int Px1, int Py1 );
+bool SegmentIntersect( wxPoint aSegStart, wxPoint aSegEnd, wxPoint aTestPoint );
 
 /****************/
 /* BUS_WIRE_JUNCTION.CPP */

eeschema/schedit.cpp

@@ -414,7 +414,11 @@ void WinEDA_SchematicFrame::Process_Special_Functions( wxCommandEvent& event )
     case ID_POPUP_SCH_MOVE_CMP_REQUEST:
         // Ensure the struct is a component (could be a struct of a
         // component, like Field, text..) or a hierachical sheet
+        // or a label
         if( (screen->GetCurItem()->Type() != TYPE_SCH_COMPONENT)
+        && (screen->GetCurItem()->Type() != TYPE_SCH_LABEL)
+        && (screen->GetCurItem()->Type() != TYPE_SCH_GLOBALLABEL)
+        && (screen->GetCurItem()->Type() != TYPE_SCH_HIERLABEL)
             && (screen->GetCurItem()->Type() != DRAW_SHEET_STRUCT_TYPE) )
             screen->SetCurItem( LocateSmallestComponent( screen ) );
         if( screen->GetCurItem() == NULL )

include/id.h

@@ -71,8 +71,6 @@ enum main_id
     ID_V_TOOLBAR,
     ID_OPT_TOOLBAR,
     ID_AUX_TOOLBAR,
-    ID_AUX_V_TOOLBAR,
-    ID_TOOLBAR_UNUSED,
 
     ID_GENERAL_HELP,
     ID_LOCAL_HELP,

include/wxPcbStruct.h

@@ -269,7 +269,7 @@ public:
     void             ReCreateHToolbar();
     void             ReCreateAuxiliaryToolbar();
     void             ReCreateVToolbar();
-    void             ReCreateAuxVToolbar();
+    void             ReCreateMicrowaveVToolbar();
     void             ReCreateOptToolbar();
     void             ReCreateMenuBar();
     WinEDAChoiceBox* ReCreateLayerBox( WinEDA_Toolbar* parent );

pcbnew/onleftclick.cpp

@@ -378,7 +378,6 @@ void WinEDA_PcbFrame::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
         DrawPanel->DrawGridAxis( DC, GR_XOR );
         GetScreen()->m_GridOrigin = GetScreen()->m_Curseur;
         DrawPanel->DrawGridAxis( DC, GR_COPY );
-        GetScreen()->SetModify();
         break;
 
     default:

pcbnew/pcbframe.cpp

@@ -319,7 +319,7 @@ WinEDA_PcbFrame::WinEDA_PcbFrame( wxWindow* father,
     ReCreateVToolbar();
     ReCreateOptToolbar();
 
-    ReCreateAuxVToolbar();
+    ReCreateMicrowaveVToolbar();
 
     m_auimgr.SetManagedWindow( this );
 
@@ -370,6 +370,9 @@ WinEDA_PcbFrame::WinEDA_PcbFrame( wxWindow* father,
         m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR,
                                       m_show_layer_manager_tools );
         m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
+        m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_EXTRA_VERTICAL_TOOLBAR1,
+                                       m_show_microwave_tools );
+        m_auimgr.GetPane( wxT( "m_AuxVToolBar" ) ).Show( m_show_microwave_tools );
     }
 
     if( DrawPanel )
@@ -542,8 +545,7 @@ void WinEDA_PcbFrame::SaveSettings()
     config->Write( PCB_SHOW_FULL_RATSNET_OPT, tmp );
     config->Write( PCB_MAGNETIC_PADS_OPT, (long) g_MagneticPadOption );
     config->Write( PCB_MAGNETIC_TRACKS_OPT, (long) g_MagneticTrackOption );
-    config->Write( SHOW_MICROWAVE_TOOLS,
-        ( m_AuxVToolBar && m_AuxVToolBar->IsShown() ) ? true : false );
+    config->Write( SHOW_MICROWAVE_TOOLS, (long) m_show_microwave_tools );
     config->Write( SHOW_LAYER_MANAGER_TOOLS, (long)m_show_layer_manager_tools );
 
 }

pcbnew/pcbnew_id.h

@@ -14,6 +14,7 @@
 enum pcbnew_ids
 {
     ID_MAIN_MENUBAR = ID_END_LIST,
+    ID_MICROWAVE_V_TOOLBAR,
     ID_OPEN_MODULE_EDITOR,
     ID_READ_NETLIST,
     ID_PCB_CIRCLE_BUTT,

pcbnew/tool_pcb.cpp

@@ -476,13 +476,13 @@ void WinEDA_PcbFrame::ReCreateVToolbar()
 /* Create the auxiliary vertical right toolbar, showing tools for
  * microwave applications
  */
-void WinEDA_PcbFrame::ReCreateAuxVToolbar()
+void WinEDA_PcbFrame::ReCreateMicrowaveVToolbar()
 {
     if( m_AuxVToolBar )
         return;
 
     m_AuxVToolBar = new WinEDA_Toolbar( TOOLBAR_TOOL, this,
-                                        ID_AUX_V_TOOLBAR, FALSE );
+                                        ID_MICROWAVE_V_TOOLBAR, FALSE );
 
     // Set up toolbar
     m_AuxVToolBar->AddTool( ID_PCB_MUWAVE_TOOL_SELF_CMD, wxEmptyString,