highlight tool HitTest()ing prefers pads over tracks

change_log.txt

@@ -5,6 +5,17 @@ Please add newer entries at the top, list the date and your name with
 email address.
 
 
+2007-Dec-13 UPDATE   Dick Hollenbeck <dick@softplc.com>
+================================================================================
++pcbnew
+  * surbrill.cpp's int WinEDA_PcbFrame::Select_High_Light( wxDC* DC )
+    was re-written to use the GENERAL_COLLECTOR, and the scanList is set to
+    give pads a higher search priority than tracks, vias or pads.
+    The objective was to use the pad if possible, rather than a track on a pad,
+    so the pad can be sent to eeschema.  Finding the track only (even though
+    on a pad) would not send anything to eeschema.
+
+
 2007-Dec-12 UPDATE   Dick Hollenbeck <dick@softplc.com>
 ================================================================================
 +pcbnew
@@ -25,8 +36,8 @@ email address.
 2007-Dec-09 UPDATE  Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
 ================================================================================
 +cvpcb:
-	listboxes.cpp FootprintListBox::m_ActiveFootprint member was not initialized.
-	Can crash cvpcb (WINDOWS only, i believe)
+    listboxes.cpp FootprintListBox::m_ActiveFootprint member was not initialized.
+    Can crash cvpcb (WINDOWS only, i believe)
 
 
 2007-Dec-09 UPDATE  Jean-Pierre Charras <jean-pierre.charras@inpg.fr>

pcbnew/collectors.cpp

@@ -92,6 +92,16 @@ const KICAD_T GENERAL_COLLECTOR::PadsOrModules[] = {
     EOT 
 };
 
+
+const KICAD_T GENERAL_COLLECTOR::PadsOrTracks[] = { 
+    TYPEPAD, 
+    TYPEVIA,
+    TYPETRACK,
+    TYPEZONE,
+    EOT 
+};
+
+
 const KICAD_T GENERAL_COLLECTOR::ModulesAndTheirItems[] = { 
     TYPETEXTEMODULE,
     TYPEEDGEMODULE,

pcbnew/collectors.h

@@ -226,6 +226,12 @@ public:
      */
     static const KICAD_T PadsOrModules[];
 
+    /**
+     * A scan list for PADs, TRACKs, VIAs, or ZONEs
+     */
+    static const KICAD_T PadsOrTracks[];
+
+    
     /**
      * A scan list for MODULEs and their items (for Modedit)
      */

pcbnew/surbrill.cpp

@@ -9,6 +9,8 @@
 #include "pcbnew.h"
 
 #include "protos.h"
+#include "collectors.h"
+
 
 #define Pad_fill (Pad_Fill_Item.State == RUN)
 
@@ -88,32 +90,40 @@ int WinEDA_PcbFrame::Select_High_Light( wxDC* DC )
 /* Localise track ou pad et met en surbrillance le net correspondant
  *  Retourne le netcode, ou -1 si pas de net localis�*/
 {
-    TRACK* pt_piste;
-    D_PAD* pt_pad;
-    int    masquelayer = g_TabOneLayerMask[GetScreen()->m_Active_Layer];
-    int    code = -1;
-
     if( g_HightLigt_Status )
         Hight_Light( DC );
     
-    pt_piste = Locate_Pistes( m_Pcb->m_Track, masquelayer, CURSEUR_OFF_GRILLE );
-    if( pt_piste )
-    {
-        code = g_HightLigth_NetCode = pt_piste->GetNet();
-        Hight_Light( DC );
-    }
-    else
+    // use this scheme because of pad is higher priority than tracks in the
+    // search, and finding a pad, instead of a track on a pad,
+    // allows us to fire a message to eescema.
+
+    GENERAL_COLLECTORS_GUIDE guide = GetCollectorsGuide();
+
+    // tweak the collector 
+    
+    m_Collector->Collect( m_Pcb, GENERAL_COLLECTOR::PadsOrTracks, 
+                         GetScreen()->RefPos( true ), guide );
+
+    BOARD_ITEM* item = (*m_Collector)[0];
+    
+    if( item )
     {
-        pt_pad = Locate_Any_Pad( m_Pcb, CURSEUR_OFF_GRILLE );
-        if( pt_pad != NULL )
+        switch( item->Type() )
         {
-            code = g_HightLigth_NetCode = pt_pad->GetNet();
+        case TYPEPAD:
+            g_HightLigth_NetCode = ((D_PAD*)item)->GetNet();
             Hight_Light( DC );
-            SendMessageToEESCHEMA( pt_pad );
+            SendMessageToEESCHEMA( item );
+            return g_HightLigth_NetCode;
+            
+        default:
+            g_HightLigth_NetCode = ((TRACK*)item)->GetNet();
+            Hight_Light( DC );
+            return g_HightLigth_NetCode;
         }
     }
-
-    return code;
+    
+    return -1;      // HitTest() failed.
 }