version changed to RC2

CHANGELOG.txt

@@ -14,7 +14,7 @@ email address.
         This rectangle is the drawing area
         this is useful under Linux (2009) because filled polygons are incorrectly drawn
         if they have too large coordinates (seems due to integer overflows in calculations)
-        Could be removed in some years, if become unnecesary.
+        Could be removed in some years, if become unnecessary.
 
 
 2009-Feb-17 UPDATE Dick Hollenbeck <dick@softplc.com>

demos/kit-dev-coldfire-xilinx_5213/kit-dev-coldfire-xilinx_5213.pro

+update=29/8/2008-13:10:03
+last_client=pcbnew
+[general]
+version=1
+RootSch=kit-dev-coldfire_5213.sch
+BoardNm=kit-dev-coldfire_5213.brd
+[eeschema]
+version=1
+LibDir=
+NetFmt=1
+HPGLSpd=20
+HPGLDm=15
+HPGLNum=1
+offX_A4=0
+offY_A4=0
+offX_A3=0
+offY_A3=0
+offX_A2=0
+offY_A2=0
+offX_A1=0
+offY_A1=0
+offX_A0=0
+offY_A0=0
+offX_A=0
+offY_A=0
+offX_B=0
+offY_B=0
+offX_C=0
+offY_C=0
+offX_D=0
+offY_D=0
+offX_E=0
+offY_E=0
+RptD_X=0
+RptD_Y=100
+RptLab=1
+SimCmd=
+UseNetN=0
+LabSize=60
+[eeschema/libraries]
+LibName1=power
+LibName2=device
+LibName3=transistors
+LibName4=conn
+LibName5=linear
+LibName6=regul
+LibName7=74xx
+LibName8=cmos4000
+LibName9=adc-dac
+LibName10=memory
+LibName11=xilinx
+LibName12=special
+LibName13=microcontrollers
+LibName14=dsp
+LibName15=microchip
+LibName16=analog_switches
+LibName17=motorola
+LibName18=texas
+LibName19=intel
+LibName20=audio
+LibName21=interface
+LibName22=digital-audio
+LibName23=philips
+LibName24=display
+LibName25=cypress
+LibName26=siliconi
+LibName27=contrib
+LibName28=valves
+[pcbnew]
+version=1
+PadDrlX=0
+PadDimH=160
+PadDimV=500
+PadForm=1
+PadMask=14745599
+ViaDiam=350
+ViaDril=150
+MViaDia=200
+MViaDrl=80
+Isol=60
+Countlayer=4
+Lpiste=300
+RouteTo=15
+RouteBo=0
+TypeVia=3
+Segm45=1
+Racc45=1
+SgPcb45=1
+TxtPcbV=800
+TxtPcbH=600
+TxtModV=600
+TxtModH=600
+TxtModW=120
+HPGLnum=1
+HPGdiam=15
+HPGLSpd=20
+HPGLrec=2
+HPGLorg=0
+VEgarde=100
+DrawLar=150
+EdgeLar=150
+TxtLar=120
+MSegLar=60
+WpenSer=10
+UserGrX=0
+UserGrY=0
+UserGrU=1
+DivGrPc=1
+TimeOut=600
+ShowRat=0
+ShowMRa=1
+[pcbnew/libraries]
+LibDir=
+LibName1=supports
+LibName2=connect
+LibName3=discret
+LibName4=pin_array
+LibName5=divers
+LibName6=libcms
+LibName7=display
+LibName8=valves

include/build_version.h

@@ -9,7 +9,7 @@ COMMON_GLOBL wxString g_BuildVersion
 #    include "config.h"
      (wxT(KICAD_SVN_VERSION))
 #  else
-     (wxT("(20090216-RC1)")) /* main program version */
+     (wxT("(20090216-RC2)")) /* main program version */
 #  endif
 #endif
 ;
@@ -20,7 +20,7 @@ COMMON_GLOBL wxString g_BuildAboutVersion
 #    include "config.h"
      (wxT(KICAD_ABOUT_VERSION))
 #  else
-     (wxT("(20090216-RC1)")) /* svn date & rev (normally overridden) */
+     (wxT("(20090216-RC2)")) /* svn date & rev (normally overridden) */
 #  endif
 #endif
 ;

libs.win

@@ -22,9 +22,9 @@ DEBUG = 0
 #Define the wxWidget path (if not found in environment variables):
 ifndef WXWIN
 ifeq ($(DEBUG), 1)
-WXWIN=f:/wxMSW-2.8.9-debug
+WXWIN=f:/wxMSW-2.8.910-rc2/Debug
 else
-WXWIN=f:/wxMSW-2.8.9
+WXWIN=f:/wxMSW-2.8.10-rc2/Release
 endif
 endif
 LIBVERSION = 2.8
@@ -68,22 +68,5 @@ CC = gcc
 .cpp.o:
 	g++ -c -Wall $(ALL_CPPFLAGS) $(ALL_CXXFLAGS) $(EXTRACPPFLAGS) -o $@ $*.cpp
 
-# Settings for Cyginw/Mingw32
-# Some versions of windres cannot cope with the --preprocessor
-# option. Uncomment the RCPREPROCESSOR line below if yours can.
-ifndef WINE
-RESCOMP=$(CROSS)windres $(_USE_TEMP_FILE_IF_SUPPORTED)
-else
-RESCOMP=wrc
-endif
-RCINPUTSWITCH=-i
-RCOUTPUTSWITCH=-o
-RCINCSWITCH=--include-dir
-RCDEFSWITCH=--define
-# Note that this can cause windres to fail (Win95/98 problem?)
-# but commenting out RCPREPROCESSOR then does the trick.
-#RCPREPROCESSOR=--preprocessor "$(CXX) -c -E -xc-header -DRC_INVOKED"
-
-# Don't make this too long (e.g. by adding contrib/include/wx) because it will
-# truncate the command line
-RESFLAGS=$(RCPREPROCESSOR) $(RCINCSWITCH) $(WXDIR)/include $(RCEXTRAINC) $(RCDEFSWITCH) __WIN32__ $(RCDEFSWITCH) __WIN95__ $(RCDEFSWITCH) __GNUWIN32__
+# Settings for Mingw32
+RESCOMP=`$(WXWIN)/wx-config --rescomp`

version.txt

 release version:
 16 feb 2009
 files (.zip,.tgz):
-kicad-2009-02-16-RC1
+kicad-2009-02-16-RC2