drc_clearance_test_functions.cpp 43.5 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193
/**
 * @file drc_clearance_test_functions.cpp
 */

/*
 * This program source code file is part of KiCad, a free EDA CAD application.
 *
 * Copyright (C) 2004-2007 Jean-Pierre Charras, jean-pierre.charras@gipsa-lab.inpg.fr
 * Copyright (C) 2007 Dick Hollenbeck, dick@softplc.com
 * Copyright (C) 2007 KiCad Developers, see change_log.txt for contributors.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, you may find one here:
 * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
 * or you may search the http://www.gnu.org website for the version 2 license,
 * or you may write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

/****************************/
/* DRC control				*/
/****************************/

#include <fctsys.h>
#include <wxPcbStruct.h>
#include <trigo.h>

#include <pcbnew.h>
#include <drc_stuff.h>

#include <class_board.h>
#include <class_module.h>
#include <class_track.h>
#include <class_zone.h>
#include <class_marker_pcb.h>
#include <math_for_graphics.h>
#include <polygon_test_point_inside.h>


/* compare 2 trapezoids (can be rectangle) and return true if distance > aDist
 * i.e if for each edge of the first polygon distance from each edge of the other polygon
 * is >= aDist
 */
bool trapezoid2trapezoidDRC( wxPoint aTref[4], wxPoint aTcompare[4], int aDist )
{
    /* Test if one polygon is contained in the other and thus the polygon overlap.
     * This case is not covered by the following check if one polygond is
     * completely contained in the other (because edges don't intersect)!
     */
    if( TestPointInsidePolygon( aTref, 4, aTcompare[0] ) )
        return false;

    if( TestPointInsidePolygon( aTcompare, 4, aTref[0] ) )
        return false;

    int ii, jj, kk, ll;

    for( ii = 0, jj = 3; ii<4; jj = ii, ii++ )          // for all edges in aTref
    {
        for( kk = 0, ll = 3; kk < 4; ll = kk, kk++ )    // for all edges in aTcompare
        {
            double d;
            int    intersect = TestForIntersectionOfStraightLineSegments( aTref[ii].x,
                                                                          aTref[ii].y,
                                                                          aTref[jj].x,
                                                                          aTref[jj].y,
                                                                          aTcompare[kk].x,
                                                                          aTcompare[kk].y,
                                                                          aTcompare[ll].x,
                                                                          aTcompare[ll].y,
                                                                          NULL, NULL, &d );
            if( intersect || (d< aDist) )
                return false;
        }
    }

    return true;
}


/* compare a trapezoids (can be rectangle) and a segment and return true if distance > aDist
 */
bool trapezoid2segmentDRC( wxPoint aTref[4], wxPoint aSegStart, wxPoint aSegEnd, int aDist )
{
    /* Test if the segment is contained in the polygon.
     * This case is not covered by the following check if the segment is
     * completely contained in the polygon (because edges don't intersect)!
     */
    if( TestPointInsidePolygon( aTref, 4, aSegStart ) )
        return false;

    int ii, jj;

    for( ii = 0, jj = 3; ii < 4; jj = ii, ii++ )  // for all edges in aTref
    {
        double d;
        int    intersect = TestForIntersectionOfStraightLineSegments( aTref[ii].x,
                                                                      aTref[ii].y,
                                                                      aTref[jj].x,
                                                                      aTref[jj].y,
                                                                      aSegStart.x,
                                                                      aSegStart.y,
                                                                      aSegEnd.x,
                                                                      aSegEnd.y,
                                                                      NULL, NULL, &d );
        if( intersect || (d< aDist) )
            return false;
    }

    return true;
}


/* compare a trapezoid to a point and return true if distance > aDist
 * do not use this function for horizontal or vertical rectangles
 * because there is a faster an easier way to compare the distance
 */
bool trapezoid2pointDRC( wxPoint aTref[4], wxPoint aPcompare, int aDist )
{
    /* Test if aPcompare point is contained in the polygon.
     * This case is not covered by the following check if this point is inside the polygon
     */
    if( TestPointInsidePolygon( aTref, 4, aPcompare ) )
    {
        return false;
    }

    // Test distance between aPcompare and each segment of the polygon:
    for( int ii = 0, jj = 3; ii < 4; jj = ii, ii++ )  // for all edge in polygon
    {
        if( TestSegmentHit( aTref[ii], aTref[jj], aPcompare, aDist ) )
            return false;
    }

    return true;
}


bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
{
    TRACK*    track;
    wxPoint   delta;           // lenght on X and Y axis of segments
    LSET layerMask;
    int       net_code_ref;
    wxPoint   shape_pos;

    NETCLASSPTR netclass = aRefSeg->GetNetClass();
    BOARD_DESIGN_SETTINGS& dsnSettings = m_pcb->GetDesignSettings();

    /* In order to make some calculations more easier or faster,
     * pads and tracks coordinates will be made relative to the reference segment origin
     */
    wxPoint origin = aRefSeg->GetStart();  // origin will be the origin of other coordinates

    m_segmEnd   = delta = aRefSeg->GetEnd() - origin;
    m_segmAngle = 0;

    layerMask    = aRefSeg->GetLayerSet();
    net_code_ref = aRefSeg->GetNetCode();

    // Phase 0 : Test vias
    if( aRefSeg->Type() == PCB_VIA_T )
    {
        const VIA *refvia = static_cast<const VIA*>( aRefSeg );
        // test if the via size is smaller than minimum
        if( refvia->GetViaType() == VIA_MICROVIA )
        {
            if( refvia->GetWidth() < dsnSettings.m_MicroViasMinSize )
            {
                m_currentMarker = fillMarker( refvia, NULL,
                                              DRCE_TOO_SMALL_MICROVIA, m_currentMarker );
                return false;
            }
        }
        else
        {
            if( refvia->GetWidth() < dsnSettings.m_ViasMinSize )
            {
                m_currentMarker = fillMarker( refvia, NULL,
                                              DRCE_TOO_SMALL_VIA, m_currentMarker );
                return false;
            }
        }

        // test if via's hole is bigger than its diameter
        // This test is necessary since the via hole size and width can be modified
        // and a default via hole can be bigger than some vias sizes
        if( refvia->GetDrillValue() > refvia->GetWidth() )
        {
            m_currentMarker = fillMarker( refvia, NULL,
                                          DRCE_VIA_HOLE_BIGGER, m_currentMarker );
            return false;
        }

        // For microvias: test if they are blind vias and only between 2 layers
        // because they are used for very small drill size and are drill by laser
        // and **only one layer** can be drilled
        if( refvia->GetViaType() == VIA_MICROVIA )
        {
            LAYER_ID    layer1, layer2;
            bool        err = true;

            refvia->LayerPair( &layer1, &layer2 );

            if( layer1 > layer2 )
                EXCHG( layer1, layer2 );

#if 0   // was:
            // test:
            if( layer1 == B_Cu && layer2 == LAYER_N_2 )
                err = false;

            if( layer1 == (m_pcb->GetDesignSettings().GetCopperLayerCount() - 2 )
                && layer2 == F_Cu )
                err = false;
#else
            if( layer2 == B_Cu && layer1 == m_pcb->GetDesignSettings().GetCopperLayerCount() - 2 )
                err = false;

            else if( layer1 == F_Cu  &&  layer2 == In1_Cu  )
                err = false;
#endif

            if( err )
            {
                m_currentMarker = fillMarker( refvia, NULL,
                                              DRCE_MICRO_VIA_INCORRECT_LAYER_PAIR, m_currentMarker );
                return false;
            }
        }
    }
    else    // This is a track segment
    {
        if( aRefSeg->GetWidth() < dsnSettings.m_TrackMinWidth )
        {
            m_currentMarker = fillMarker( aRefSeg, NULL,
                                          DRCE_TOO_SMALL_TRACK_WIDTH, m_currentMarker );
            return false;
        }
    }

    // for a non horizontal or vertical segment Compute the segment angle
    // in tenths of degrees and its length
    if( delta.x || delta.y )
    {
        // Compute the segment angle in 0,1 degrees
        m_segmAngle = ArcTangente( delta.y, delta.x );

        // Compute the segment length: we build an equivalent rotated segment,
        // this segment is horizontal, therefore dx = length
        RotatePoint( &delta, m_segmAngle );    // delta.x = length, delta.y = 0
    }

    m_segmLength = delta.x;

    /******************************************/
    /* Phase 1 : test DRC track to pads :     */
    /******************************************/

    /* Use a dummy pad to test DRC tracks versus holes, for pads not on all copper layers
     * but having a hole
     * This dummy pad has the size and shape of the hole
     * to test tracks to pad hole DRC, using checkClearanceSegmToPad test function.
     * Therefore, this dummy pad is a circle or an oval.
     * A pad must have a parent because some functions expect a non null parent
     * to find the parent board, and some other data
     */
    MODULE  dummymodule( m_pcb );    // Creates a dummy parent
    D_PAD   dummypad( &dummymodule );

    dummypad.SetLayerSet( LSET::AllCuMask() );     // Ensure the hole is on all layers

    // Compute the min distance to pads
    if( testPads )
    {
        for( unsigned ii = 0;  ii<m_pcb->GetPadCount();  ++ii )
        {
            D_PAD* pad = m_pcb->GetPad( ii );

            /* No problem if pads are on an other layer,
             * But if a drill hole exists	(a pad on a single layer can have a hole!)
             * we must test the hole
             */
            if( !( pad->GetLayerSet() & layerMask ).any() )
            {
                /* We must test the pad hole. In order to use the function
                 * checkClearanceSegmToPad(),a pseudo pad is used, with a shape and a
                 * size like the hole
                 */
                if( pad->GetDrillSize().x == 0 )
                    continue;

                dummypad.SetSize( pad->GetDrillSize() );
                dummypad.SetPosition( pad->GetPosition() );
                dummypad.SetShape( pad->GetDrillShape()  == PAD_DRILL_OBLONG ?
                                   PAD_OVAL : PAD_CIRCLE );
                dummypad.SetOrientation( pad->GetOrientation() );

                m_padToTestPos = dummypad.GetPosition() - origin;

                if( !checkClearanceSegmToPad( &dummypad, aRefSeg->GetWidth(),
                                              netclass->GetClearance() ) )
                {
                    m_currentMarker = fillMarker( aRefSeg, pad,
                                                  DRCE_TRACK_NEAR_THROUGH_HOLE, m_currentMarker );
                    return false;
                }

                continue;
            }

            // The pad must be in a net (i.e pt_pad->GetNet() != 0 )
            // but no problem if the pad netcode is the current netcode (same net)
            if( pad->GetNetCode()                       // the pad must be connected
               && net_code_ref == pad->GetNetCode() )   // the pad net is the same as current net -> Ok
                continue;

            // DRC for the pad
            shape_pos = pad->ShapePos();
            m_padToTestPos = shape_pos - origin;

            if( !checkClearanceSegmToPad( pad, aRefSeg->GetWidth(), aRefSeg->GetClearance( pad ) ) )
            {
                m_currentMarker = fillMarker( aRefSeg, pad,
                                              DRCE_TRACK_NEAR_PAD, m_currentMarker );
                return false;
            }
        }
    }

    /***********************************************/
    /* Phase 2: test DRC with other track segments */
    /***********************************************/

    // At this point the reference segment is the X axis

    // Test the reference segment with other track segments
    wxPoint segStartPoint;
    wxPoint segEndPoint;
    for( track = aStart; track; track = track->Next() )
    {
        // No problem if segments have the same net code:
        if( net_code_ref == track->GetNetCode() )
            continue;

        // No problem if segment are on different layers :
        if( !( layerMask & track->GetLayerSet() ).any() )
            continue;

        // the minimum distance = clearance plus half the reference track
        // width plus half the other track's width
        int w_dist = aRefSeg->GetClearance( track );
        w_dist += (aRefSeg->GetWidth() + track->GetWidth()) / 2;

        // If the reference segment is a via, we test it here
        if( aRefSeg->Type() == PCB_VIA_T )
        {
            delta = track->GetEnd() - track->GetStart();
            segStartPoint = aRefSeg->GetStart() - track->GetStart();

            if( track->Type() == PCB_VIA_T )
            {
                // Test distance between two vias, i.e. two circles, trivial case
                if( EuclideanNorm( segStartPoint ) < w_dist )
                {
                    m_currentMarker = fillMarker( aRefSeg, track,
                                                  DRCE_VIA_NEAR_VIA, m_currentMarker );
                    return false;
                }
            }
            else    // test via to segment
            {
                // Compute l'angle du segment a tester;
                double angle = ArcTangente( delta.y, delta.x );

                // Compute new coordinates ( the segment become horizontal)
                RotatePoint( &delta, angle );
                RotatePoint( &segStartPoint, angle );

                if( !checkMarginToCircle( segStartPoint, w_dist, delta.x ) )
                {
                    m_currentMarker = fillMarker( track, aRefSeg,
                                                  DRCE_VIA_NEAR_TRACK, m_currentMarker );
                    return false;
                }
            }

            continue;
        }

        /* We compute segStartPoint, segEndPoint = starting and ending point coordinates for
         * the segment to test in the new axis : the new X axis is the
         * reference segment.  We must translate and rotate the segment to test
         */
        segStartPoint = track->GetStart() - origin;
        segEndPoint   = track->GetEnd() - origin;
        RotatePoint( &segStartPoint, m_segmAngle );
        RotatePoint( &segEndPoint, m_segmAngle );
        if( track->Type() == PCB_VIA_T )
        {
            if( checkMarginToCircle( segStartPoint, w_dist, m_segmLength ) )
                continue;

            m_currentMarker = fillMarker( aRefSeg, track,
                                          DRCE_TRACK_NEAR_VIA, m_currentMarker );
            return false;
        }

        /*	We have changed axis:
         *  the reference segment is Horizontal.
         *  3 cases : the segment to test can be parallel, perpendicular or have an other direction
         */
        if( segStartPoint.y == segEndPoint.y ) // parallel segments
        {
            if( abs( segStartPoint.y ) >= w_dist )
                continue;

            // Ensure segStartPoint.x <= segEndPoint.x
            if( segStartPoint.x > segEndPoint.x )
                EXCHG( segStartPoint.x, segEndPoint.x );

            if( segStartPoint.x > (-w_dist) && segStartPoint.x < (m_segmLength + w_dist) )    /* possible error drc */
            {
                // the start point is inside the reference range
                //      X........
                //    O--REF--+

                // Fine test : we consider the rounded shape of each end of the track segment:
                if( segStartPoint.x >= 0 && segStartPoint.x <= m_segmLength )
                {
                    m_currentMarker = fillMarker( aRefSeg, track,
                                                  DRCE_TRACK_ENDS1, m_currentMarker );
                    return false;
                }

                if( !checkMarginToCircle( segStartPoint, w_dist, m_segmLength ) )
                {
                    m_currentMarker = fillMarker( aRefSeg, track,
                                                  DRCE_TRACK_ENDS2, m_currentMarker );
                    return false;
                }
            }

            if( segEndPoint.x > (-w_dist) && segEndPoint.x < (m_segmLength + w_dist) )
            {
                // the end point is inside the reference range
                //  .....X
                //    O--REF--+
                // Fine test : we consider the rounded shape of the ends
                if( segEndPoint.x >= 0 && segEndPoint.x <= m_segmLength )
                {
                    m_currentMarker = fillMarker( aRefSeg, track,
                                                  DRCE_TRACK_ENDS3, m_currentMarker );
                    return false;
                }

                if( !checkMarginToCircle( segEndPoint, w_dist, m_segmLength ) )
                {
                    m_currentMarker = fillMarker( aRefSeg, track,
                                                  DRCE_TRACK_ENDS4, m_currentMarker );
                    return false;
                }
            }

            if( segStartPoint.x <=0 && segEndPoint.x >= 0 )
            {
            // the segment straddles the reference range (this actually only
            // checks if it straddles the origin, because the other cases where already
            // handled)
            //  X.............X
            //    O--REF--+
                m_currentMarker = fillMarker( aRefSeg, track,
                                              DRCE_TRACK_SEGMENTS_TOO_CLOSE, m_currentMarker );
                return false;
            }
        }
        else if( segStartPoint.x == segEndPoint.x ) // perpendicular segments
        {
            if( ( segStartPoint.x <= (-w_dist) ) || ( segStartPoint.x >= (m_segmLength + w_dist) ) )
                continue;

            // Test if segments are crossing
            if( segStartPoint.y > segEndPoint.y )
                EXCHG( segStartPoint.y, segEndPoint.y );

            if( (segStartPoint.y < 0) && (segEndPoint.y > 0) )
            {
                m_currentMarker = fillMarker( aRefSeg, track,
                                              DRCE_TRACKS_CROSSING, m_currentMarker );
                return false;
            }

            // At this point the drc error is due to an end near a reference segm end
            if( !checkMarginToCircle( segStartPoint, w_dist, m_segmLength ) )
            {
                m_currentMarker = fillMarker( aRefSeg, track,
                                              DRCE_ENDS_PROBLEM1, m_currentMarker );
                return false;
            }
            if( !checkMarginToCircle( segEndPoint, w_dist, m_segmLength ) )
            {
                m_currentMarker = fillMarker( aRefSeg, track,
                                              DRCE_ENDS_PROBLEM2, m_currentMarker );
                return false;
            }
        }
        else    // segments quelconques entre eux
        {
            // calcul de la "surface de securite du segment de reference
            // First rought 'and fast) test : the track segment is like a rectangle

            m_xcliplo = m_ycliplo = -w_dist;
            m_xcliphi = m_segmLength + w_dist;
            m_ycliphi = w_dist;

            // A fine test is needed because a serment is not exactly a
            // rectangle, it has rounded ends
            if( !checkLine( segStartPoint, segEndPoint ) )
            {
                /* 2eme passe : the track has rounded ends.
                 * we must a fine test for each rounded end and the
                 * rectangular zone
                 */

                m_xcliplo = 0;
                m_xcliphi = m_segmLength;

                if( !checkLine( segStartPoint, segEndPoint ) )
                {
                    m_currentMarker = fillMarker( aRefSeg, track,
                                                  DRCE_ENDS_PROBLEM3, m_currentMarker );
                    return false;
                }
                else    // The drc error is due to the starting or the ending point of the reference segment
                {
                    // Test the starting and the ending point
                    segStartPoint = track->GetStart();
                    segEndPoint   = track->GetEnd();
                    delta = segEndPoint - segStartPoint;

                    // Compute the segment orientation (angle) en 0,1 degre
                    double angle = ArcTangente( delta.y, delta.x );

                    // Compute the segment lenght: delta.x = lenght after rotation
                    RotatePoint( &delta, angle );

                    /* Comute the reference segment coordinates relatives to a
                     *  X axis = current tested segment
                     */
                    wxPoint relStartPos = aRefSeg->GetStart() - segStartPoint;
                    wxPoint relEndPos   = aRefSeg->GetEnd() - segStartPoint;

                    RotatePoint( &relStartPos, angle );
                    RotatePoint( &relEndPos, angle );

                    if( !checkMarginToCircle( relStartPos, w_dist, delta.x ) )
                    {
                        m_currentMarker = fillMarker( aRefSeg, track,
                                                      DRCE_ENDS_PROBLEM4, m_currentMarker );
                        return false;
                    }

                    if( !checkMarginToCircle( relEndPos, w_dist, delta.x ) )
                    {
                        m_currentMarker = fillMarker( aRefSeg, track,
                                                      DRCE_ENDS_PROBLEM5, m_currentMarker );
                        return false;
                    }
                }
            }
        }
    }

    return true;
}


/* test DRC between 2 pads.
 * this function can be also used to test DRC between a pas and a hole,
 * because a hole is like a round pad.
 */
bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
{
    int     dist;

    double  pad_angle;

    // Get the clerance between the 2 pads. this is the min distance between aRefPad and aPad
    int     dist_min = aRefPad->GetClearance( aPad );

    // relativePadPos is the aPad shape position relative to the aRefPad shape position
    wxPoint relativePadPos = aPad->ShapePos() - aRefPad->ShapePos();

    dist = KiROUND( EuclideanNorm( relativePadPos ) );

    // Quick test: Clearance is OK if the bounding circles are further away than "dist_min"
    if( (dist - aRefPad->GetBoundingRadius() - aPad->GetBoundingRadius()) >= dist_min )
        return true;

    /* Here, pads are near and DRC depend on the pad shapes
     * We must compare distance using a fine shape analysis
     * Because a circle or oval shape is the easier shape to test, try to have
     * aRefPad shape type = PAD_CIRCLE or PAD_OVAL.
     * if aRefPad = TRAP. and aPad = RECT, also swap pads
     * Swap aRefPad and aPad if needed
     */
    bool swap_pads;
    swap_pads = false;

    // swap pads to make comparisons easier
    // priority is aRefPad = ROUND then OVAL then RECT then other
    if( aRefPad->GetShape() != aPad->GetShape() && aRefPad->GetShape() != PAD_CIRCLE )
    {
        // pad ref shape is here oval, rect or trapezoid
        switch( aPad->GetShape() )
        {
            case PAD_CIRCLE:
                swap_pads = true;
                break;

            case PAD_OVAL:
                swap_pads = true;
                break;

            case PAD_RECT:
                if( aRefPad->GetShape() != PAD_OVAL )
                    swap_pads = true;
                break;

            default:
                break;
        }
    }

    if( swap_pads )
    {
        EXCHG( aRefPad, aPad );
        relativePadPos = -relativePadPos;
    }

    /* Because pad exchange, aRefPad shape is PAD_CIRCLE or PAD_OVAL,
     * if one of the 2 pads was a PAD_CIRCLE or PAD_OVAL.
     * Therefore, if aRefPad is a PAD_RECT or a PAD_TRAPEZOID,
     * aPad is also a PAD_RECT or a PAD_TRAPEZOID
     */
    bool diag = true;

    switch( aRefPad->GetShape() )
    {
    case PAD_CIRCLE:

        /* One can use checkClearanceSegmToPad to test clearance
         * aRefPad is like a track segment with a null length and a witdth = GetSize().x
         */
        m_segmLength = 0;
        m_segmAngle  = 0;

        m_segmEnd.x = m_segmEnd.y = 0;

        m_padToTestPos = relativePadPos;
        diag = checkClearanceSegmToPad( aPad, aRefPad->GetSize().x, dist_min );
        break;

    case PAD_RECT:
        // pad_angle = pad orient relative to the aRefPad orient
        pad_angle = aRefPad->GetOrientation() + aPad->GetOrientation();
        NORMALIZE_ANGLE_POS( pad_angle );

        if( aPad->GetShape() == PAD_RECT )
        {
            wxSize size = aPad->GetSize();

            // The trivial case is if both rects are rotated by multiple of 90 deg
            // Most of time this is the case, and the test is fast
            if( ( (aRefPad->GetOrientation() == 0) || (aRefPad->GetOrientation() == 900)
                 || (aRefPad->GetOrientation() == 1800) || (aRefPad->GetOrientation() == 2700) )
               && ( (aPad->GetOrientation() == 0) || (aPad->GetOrientation() == 900) || (aPad->GetOrientation() == 1800)
                   || (aPad->GetOrientation() == 2700) ) )
            {
                if( (pad_angle == 900) || (pad_angle == 2700) )
                {
                    EXCHG( size.x, size.y );
                }

                // Test DRC:
                diag = false;
                RotatePoint( &relativePadPos, aRefPad->GetOrientation() );
                relativePadPos.x = std::abs( relativePadPos.x );
                relativePadPos.y = std::abs( relativePadPos.y );

                if( ( relativePadPos.x - ( (size.x + aRefPad->GetSize().x) / 2 ) ) >= dist_min )
                    diag = true;

                if( ( relativePadPos.y - ( (size.y + aRefPad->GetSize().y) / 2 ) ) >= dist_min )
                    diag = true;
            }
            else    // at least one pad has any other orient. Test is more tricky
            {   // Use the trapezoid2trapezoidDRC which also compare 2 rectangles with any orientation
                wxPoint polyref[4];         // Shape of aRefPad
                wxPoint polycompare[4];     // Shape of aPad
                aRefPad->BuildPadPolygon( polyref, wxSize( 0, 0 ), aRefPad->GetOrientation() );
                aPad->BuildPadPolygon( polycompare, wxSize( 0, 0 ), aPad->GetOrientation() );

                // Move aPad shape to relativePadPos
                for( int ii = 0; ii < 4; ii++ )
                    polycompare[ii] += relativePadPos;

                // And now test polygons:
                if( !trapezoid2trapezoidDRC( polyref, polycompare, dist_min ) )
                    diag = false;
            }
        }
        else if( aPad->GetShape() == PAD_TRAPEZOID )
        {
            wxPoint polyref[4];         // Shape of aRefPad
            wxPoint polycompare[4];     // Shape of aPad
            aRefPad->BuildPadPolygon( polyref, wxSize( 0, 0 ), aRefPad->GetOrientation() );
            aPad->BuildPadPolygon( polycompare, wxSize( 0, 0 ), aPad->GetOrientation() );

            // Move aPad shape to relativePadPos
            for( int ii = 0; ii < 4; ii++ )
                polycompare[ii] += relativePadPos;

            // And now test polygons:
            if( !trapezoid2trapezoidDRC( polyref, polycompare, dist_min ) )
                diag = false;
        }
        else
        {
            // Should not occur, because aPad and aRefPad are swapped
            // to have only aPad shape RECT or TRAP and aRefPad shape TRAP or RECT.
            wxLogDebug( wxT( "DRC::checkClearancePadToPad: unexpected pad ref RECT @ %d, %d to pad shape %d @ %d, %d"),
                aRefPad->GetPosition().x, aRefPad->GetPosition().y,
                aPad->GetShape(), aPad->GetPosition().x, aPad->GetPosition().y );
        }
        break;

    case PAD_OVAL:     /* an oval pad is like a track segment */
    {
        /* Create a track segment with same dimensions as the oval aRefPad
         * and use checkClearanceSegmToPad function to test aPad to aRefPad clearance
         */
        int segm_width;
        m_segmAngle = aRefPad->GetOrientation();                // Segment orient.

        if( aRefPad->GetSize().y < aRefPad->GetSize().x )     // Build an horizontal equiv segment
        {
            segm_width   = aRefPad->GetSize().y;
            m_segmLength = aRefPad->GetSize().x - aRefPad->GetSize().y;
        }
        else        // Vertical oval: build an horizontal equiv segment and rotate 90.0 deg
        {
            segm_width   = aRefPad->GetSize().x;
            m_segmLength = aRefPad->GetSize().y - aRefPad->GetSize().x;
            m_segmAngle += 900;
        }

        /* the start point must be 0,0 and currently relativePadPos
         * is relative the center of pad coordinate */
        wxPoint segstart;
        segstart.x = -m_segmLength / 2;                 // Start point coordinate of the horizontal equivalent segment

        RotatePoint( &segstart, m_segmAngle );          // actual start point coordinate of the equivalent segment
        // Calculate segment end position relative to the segment origin
        m_segmEnd.x = -2 * segstart.x;
        m_segmEnd.y = -2 * segstart.y;

        // Recalculate the equivalent segment angle in 0,1 degrees
        // to prepare a call to checkClearanceSegmToPad()
        m_segmAngle = ArcTangente( m_segmEnd.y, m_segmEnd.x );

        // move pad position relative to the segment origin
        m_padToTestPos = relativePadPos - segstart;

        // Use segment to pad check to test the second pad:
        diag = checkClearanceSegmToPad( aPad, segm_width, dist_min );
        break;
    }

    case PAD_TRAPEZOID:

        // at this point, aPad is also a trapezoid, because all other shapes
        // have priority, and are already tested
        wxASSERT( aPad->GetShape() == PAD_TRAPEZOID );
        {
            wxPoint polyref[4];         // Shape of aRefPad
            wxPoint polycompare[4];     // Shape of aPad
            aRefPad->BuildPadPolygon( polyref, wxSize( 0, 0 ), aRefPad->GetOrientation() );
            aPad->BuildPadPolygon( polycompare, wxSize( 0, 0 ), aPad->GetOrientation() );

            // Move aPad shape to relativePadPos
            for( int ii = 0; ii < 4; ii++ )
                polycompare[ii] += relativePadPos;

            // And now test polygons:
            if( !trapezoid2trapezoidDRC( polyref, polycompare, dist_min ) )
                diag = false;
        }
        break;

    default:
        wxLogDebug( wxT( "DRC::checkClearancePadToPad: unexpected pad shape" ) );
        break;
    }

    return diag;
}


/* test if distance between a segment is > aMinDist
 * segment start point is assumed in (0,0) and  segment start point in m_segmEnd
 * and its orientation is m_segmAngle (m_segmAngle must be already initialized)
 * and have aSegmentWidth.
 */
bool DRC::checkClearanceSegmToPad( const D_PAD* aPad, int aSegmentWidth, int aMinDist )
{
    wxSize  padHalfsize;        // half the dimension of the pad
    wxPoint startPoint, endPoint;
    int     seuil;
    int     deltay;

    int     segmHalfWidth = aSegmentWidth / 2;

    seuil = segmHalfWidth + aMinDist;
    padHalfsize.x = aPad->GetSize().x >> 1;
    padHalfsize.y = aPad->GetSize().y >> 1;

    if( aPad->GetShape() == PAD_TRAPEZOID ) // The size is bigger, due to GetDelta() extra size
    {
        padHalfsize.x += std::abs(aPad->GetDelta().y) / 2;   // Remember: GetDelta().y is the GetSize().x change
        padHalfsize.y += std::abs(aPad->GetDelta().x) / 2;   // Remember: GetDelta().x is the GetSize().y change
    }

    if( aPad->GetShape() == PAD_CIRCLE )
    {
        /* Easy case: just test the distance between segment and pad centre
         * calculate pad coordinates in the X,Y axis with X axis = segment to test
         */
        RotatePoint( &m_padToTestPos, m_segmAngle );
        return checkMarginToCircle( m_padToTestPos, seuil + padHalfsize.x, m_segmLength );
    }

    /* calculate the bounding box of the pad, including the clearance and the segment width
     * if the line from 0 to m_segmEnd does not intersect this bounding box,
     * the clearance is always OK
     * But if intersect, a better analysis of the pad shape must be done.
     */
    m_xcliplo = m_padToTestPos.x - seuil - padHalfsize.x;
    m_ycliplo = m_padToTestPos.y - seuil - padHalfsize.y;
    m_xcliphi = m_padToTestPos.x + seuil + padHalfsize.x;
    m_ycliphi = m_padToTestPos.y + seuil + padHalfsize.y;

    startPoint.x = startPoint.y = 0;
    endPoint     = m_segmEnd;

    double orient = aPad->GetOrientation();

    RotatePoint( &startPoint, m_padToTestPos, -orient );
    RotatePoint( &endPoint, m_padToTestPos, -orient );

    if( checkLine( startPoint, endPoint ) )
        return true;

    /* segment intersects the bounding box. But there is not always a DRC error.
     * A fine analysis of the pad shape must be done.
     */
    switch( aPad->GetShape() )
    {
    default:
        return false;

    case PAD_OVAL:

        /* an oval is a complex shape, but is a rectangle and 2 circles
         * these 3 basic shapes are more easy to test.
         */
        /* We use a vertical oval shape. for horizontal ovals, swap x and y size and rotate the shape*/
        if( padHalfsize.x > padHalfsize.y )
        {
            EXCHG( padHalfsize.x, padHalfsize.y );
            orient = AddAngles( orient, 900 );
        }

        deltay = padHalfsize.y - padHalfsize.x;

        // here: padHalfsize.x = radius, delta = dist centre cercles a centre pad

        // Test the rectangle area between the two circles
        m_xcliplo = m_padToTestPos.x - seuil - padHalfsize.x;
        m_ycliplo = m_padToTestPos.y - segmHalfWidth - deltay;
        m_xcliphi = m_padToTestPos.x + seuil + padHalfsize.x;
        m_ycliphi = m_padToTestPos.y + segmHalfWidth + deltay;

        if( !checkLine( startPoint, endPoint ) )
        {
            return false;
        }

        // test the first circle
        startPoint.x = m_padToTestPos.x;         // startPoint = centre of the upper circle of the oval shape
        startPoint.y = m_padToTestPos.y + deltay;

        // Calculate the actual position of the circle, given the pad orientation:
        RotatePoint( &startPoint, m_padToTestPos, orient );

        // Calculate the actual position of the circle in the new X,Y axis:
        RotatePoint( &startPoint, m_segmAngle );

        if( !checkMarginToCircle( startPoint, padHalfsize.x + seuil, m_segmLength ) )
        {
            return false;
        }

        // test the second circle
        startPoint.x = m_padToTestPos.x;         // startPoint = centre of the lower circle of the oval shape
        startPoint.y = m_padToTestPos.y - deltay;
        RotatePoint( &startPoint, m_padToTestPos, orient );
        RotatePoint( &startPoint, m_segmAngle );

        if( !checkMarginToCircle( startPoint, padHalfsize.x + seuil, m_segmLength ) )
        {
            return false;
        }

        break;

    case PAD_RECT:          /* 2 rectangle + 4 1/4 cercles a tester */
        /* Test du rectangle dimx + seuil, dimy */
        m_xcliplo = m_padToTestPos.x - padHalfsize.x - seuil;
        m_ycliplo = m_padToTestPos.y - padHalfsize.y;
        m_xcliphi = m_padToTestPos.x + padHalfsize.x + seuil;
        m_ycliphi = m_padToTestPos.y + padHalfsize.y;

        if( !checkLine( startPoint, endPoint ) )
            return false;

        /* Test du rectangle dimx , dimy + seuil */
        m_xcliplo = m_padToTestPos.x - padHalfsize.x;
        m_ycliplo = m_padToTestPos.y - padHalfsize.y - seuil;
        m_xcliphi = m_padToTestPos.x + padHalfsize.x;
        m_ycliphi = m_padToTestPos.y + padHalfsize.y + seuil;

        if( !checkLine( startPoint, endPoint ) )
            return false;

        /* test des 4 cercles ( surface d'solation autour des sommets */
        /* test du coin sup. gauche du pad */
        startPoint.x = m_padToTestPos.x - padHalfsize.x;
        startPoint.y = m_padToTestPos.y - padHalfsize.y;
        RotatePoint( &startPoint, m_padToTestPos, orient );
        RotatePoint( &startPoint, m_segmAngle );

        if( !checkMarginToCircle( startPoint, seuil, m_segmLength ) )
            return false;

        /* test du coin sup. droit du pad */
        startPoint.x = m_padToTestPos.x + padHalfsize.x;
        startPoint.y = m_padToTestPos.y - padHalfsize.y;
        RotatePoint( &startPoint, m_padToTestPos, orient );
        RotatePoint( &startPoint, m_segmAngle );

        if( !checkMarginToCircle( startPoint, seuil, m_segmLength ) )
            return false;

        /* test du coin inf. gauche du pad */
        startPoint.x = m_padToTestPos.x - padHalfsize.x;
        startPoint.y = m_padToTestPos.y + padHalfsize.y;
        RotatePoint( &startPoint, m_padToTestPos, orient );
        RotatePoint( &startPoint, m_segmAngle );

        if( !checkMarginToCircle( startPoint, seuil, m_segmLength ) )
            return false;

        /* test du coin inf. droit du pad */
        startPoint.x = m_padToTestPos.x + padHalfsize.x;
        startPoint.y = m_padToTestPos.y + padHalfsize.y;
        RotatePoint( &startPoint, m_padToTestPos, orient );
        RotatePoint( &startPoint, m_segmAngle );

        if( !checkMarginToCircle( startPoint, seuil, m_segmLength ) )
            return false;

        break;

    case PAD_TRAPEZOID:
    {
        wxPoint poly[4];
        aPad->BuildPadPolygon( poly, wxSize( 0, 0 ), orient );

        // Move shape to m_padToTestPos
        for( int ii = 0; ii < 4; ii++ )
        {
            poly[ii] += m_padToTestPos;
            RotatePoint( &poly[ii], m_segmAngle );
        }

        if( !trapezoid2segmentDRC( poly, wxPoint( 0, 0 ), wxPoint(m_segmLength,0), seuil ) )
            return false;
    }
    break;
    }

    return true;
}


/**
 * Helper function checkMarginToCircle
 * Check the distance between a circle (round pad, via or round end of track)
 * and a segment. the segment is expected starting at 0,0, and on the X axis
 * return true if distance >= aRadius
 */
bool DRC::checkMarginToCircle( wxPoint aCentre, int aRadius, int aLength )
{
    if( abs( aCentre.y ) > aRadius )     // trivial case
        return true;

    // Here, distance between aCentre and X axis is < aRadius
    if( (aCentre.x >= -aRadius ) && ( aCentre.x <= (aLength + aRadius) ) )
    {
        if( (aCentre.x >= 0) && (aCentre.x <= aLength) )
            return false;           // aCentre is between the starting point and the ending point of the segm

        if( aCentre.x > aLength )   // aCentre is after the ending point
            aCentre.x -= aLength;   // move aCentre to the starting point of the segment

        if( EuclideanNorm( aCentre ) < aRadius )
            // distance between aCentre and the starting point or the ending point is < aRadius
            return false;
    }

    return true;
}


// Helper function used in checkLine::
static inline int USCALE( unsigned arg, unsigned num, unsigned den )
{
    int ii;

    ii = KiROUND( ( (double) arg * num ) / den );
    return ii;
}


/** Helper function checkLine
 * Test if a line intersects a bounding box (a rectangle)
 * The rectangle is defined by m_xcliplo, m_ycliplo and m_xcliphi, m_ycliphi
 * return true if the line from aSegStart to aSegEnd is outside the bounding box
 */
bool DRC::checkLine( wxPoint aSegStart, wxPoint aSegEnd )
{
#define WHEN_OUTSIDE return true
#define WHEN_INSIDE
    int temp;

    if( aSegStart.x > aSegEnd.x )
        EXCHG( aSegStart, aSegEnd );

    if( (aSegEnd.x < m_xcliplo) || (aSegStart.x > m_xcliphi) )
    {
        WHEN_OUTSIDE;
    }

    if( aSegStart.y < aSegEnd.y )
    {
        if( (aSegEnd.y < m_ycliplo) || (aSegStart.y > m_ycliphi) )
        {
            WHEN_OUTSIDE;
        }

        if( aSegStart.y < m_ycliplo )
        {
            temp = USCALE( (aSegEnd.x - aSegStart.x), (m_ycliplo - aSegStart.y),
                           (aSegEnd.y - aSegStart.y) );

            if( (aSegStart.x += temp) > m_xcliphi )
            {
                WHEN_OUTSIDE;
            }

            aSegStart.y = m_ycliplo;
            WHEN_INSIDE;
        }

        if( aSegEnd.y > m_ycliphi )
        {
            temp = USCALE( (aSegEnd.x - aSegStart.x), (aSegEnd.y - m_ycliphi),
                           (aSegEnd.y - aSegStart.y) );

            if( (aSegEnd.x -= temp) < m_xcliplo )
            {
                WHEN_OUTSIDE;
            }

            aSegEnd.y = m_ycliphi;
            WHEN_INSIDE;
        }

        if( aSegStart.x < m_xcliplo )
        {
            temp = USCALE( (aSegEnd.y - aSegStart.y), (m_xcliplo - aSegStart.x),
                           (aSegEnd.x - aSegStart.x) );
            aSegStart.y += temp;
            aSegStart.x  = m_xcliplo;
            WHEN_INSIDE;
        }

        if( aSegEnd.x > m_xcliphi )
        {
            temp = USCALE( (aSegEnd.y - aSegStart.y), (aSegEnd.x - m_xcliphi),
                           (aSegEnd.x - aSegStart.x) );
            aSegEnd.y -= temp;
            aSegEnd.x  = m_xcliphi;
            WHEN_INSIDE;
        }
    }
    else
    {
        if( (aSegStart.y < m_ycliplo) || (aSegEnd.y > m_ycliphi) )
        {
            WHEN_OUTSIDE;
        }

        if( aSegStart.y > m_ycliphi )
        {
            temp = USCALE( (aSegEnd.x - aSegStart.x), (aSegStart.y - m_ycliphi),
                           (aSegStart.y - aSegEnd.y) );

            if( (aSegStart.x += temp) > m_xcliphi )
            {
                WHEN_OUTSIDE;
            }

            aSegStart.y = m_ycliphi;
            WHEN_INSIDE;
        }

        if( aSegEnd.y < m_ycliplo )
        {
            temp = USCALE( (aSegEnd.x - aSegStart.x), (m_ycliplo - aSegEnd.y),
                           (aSegStart.y - aSegEnd.y) );

            if( (aSegEnd.x -= temp) < m_xcliplo )
            {
                WHEN_OUTSIDE;
            }

            aSegEnd.y = m_ycliplo;
            WHEN_INSIDE;
        }

        if( aSegStart.x < m_xcliplo )
        {
            temp = USCALE( (aSegStart.y - aSegEnd.y), (m_xcliplo - aSegStart.x),
                           (aSegEnd.x - aSegStart.x) );
            aSegStart.y -= temp;
            aSegStart.x  = m_xcliplo;
            WHEN_INSIDE;
        }

        if( aSegEnd.x > m_xcliphi )
        {
            temp = USCALE( (aSegStart.y - aSegEnd.y), (aSegEnd.x - m_xcliphi),
                           (aSegEnd.x - aSegStart.x) );
            aSegEnd.y += temp;
            aSegEnd.x  = m_xcliphi;
            WHEN_INSIDE;
        }
    }

    if( ( (aSegEnd.x + aSegStart.x) / 2 <= m_xcliphi )
       && ( (aSegEnd.x + aSegStart.x) / 2 >= m_xcliplo ) \
       && ( (aSegEnd.y + aSegStart.y) / 2 <= m_ycliphi )
       && ( (aSegEnd.y + aSegStart.y) / 2 >= m_ycliplo ) )
    {
        return false;
    }
    else
    {
        return true;
    }
}