1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
/***************************************************************************/
/* class_board_design_settings.cpp - BOARD_DESIGN_SETTINGS class functions */
/***************************************************************************/
#include "fctsys.h"
#include "common.h"
#include "pcbnew.h"
#include "class_board_design_settings.h"
/*****************************************************/
BOARD_DESIGN_SETTINGS::BOARD_DESIGN_SETTINGS()
/*****************************************************/
// Default values for designing boards
{
m_EnabledLayers = ALL_LAYERS; // All layers enabled at first.
// SetCopperLayerCount() will adjust this.
SetVisibleAlls( ); // All layers and all elements visible at first.
SetCopperLayerCount( 2 ); // Default design is a double sided board
m_CurrentViaType = VIA_THROUGH; // via type (VIA_BLIND_BURIED, VIA_THROUGH VIA_MICROVIA)
m_UseConnectedTrackWidth = false; // if true, when creating a new track starting on an existing track, use this track width
m_MicroViasAllowed = false; // true to allow micro vias
m_DrawSegmentWidth = 100; // current graphic line width (not EDGE layer)
m_EdgeSegmentWidth = 100; // current graphic line width (EDGE layer only)
m_PcbTextWidth = 100; // current Pcb (not module) Text width
m_PcbTextSize = wxSize( 500, 500 ); // current Pcb (not module) Text size
m_TrackMinWidth = 80; // track min value for width ((min copper size value
m_ViasMinSize = 350; // vias (not micro vias) min diameter
m_ViasMinDrill = 200; // vias (not micro vias) min drill diameter
m_MicroViasMinSize = 200; // micro vias (not vias) min diameter
m_MicroViasMinDrill = 50; // micro vias (not vias) min drill diameter
// Global mask margins:
m_SolderMaskMargin = 150; // Solder mask margin
m_SolderPasteMargin = 0; // Solder paste margin absolute value
m_SolderPasteMarginRatio = 0.0; // Solder pask margin ratio value of pad size
// The final margin is the sum of these 2 values
// Usually < 0 because the mask is smaller than pad
m_BoardThickness = (int)(1.6 * PCB_INTERNAL_UNIT / 25.4); // Epoxy thickness for 3D view (and microwave calculations) // Layer Thickness for 3D viewer
}
// see pcbstruct.h
int BOARD_DESIGN_SETTINGS::GetVisibleLayers() const
{
return m_VisibleLayers;
}
/**
* Function SetVisibleAlls
* Set the bit-mask of all visible elements categories,
* including enabled layers
*/
void BOARD_DESIGN_SETTINGS::SetVisibleAlls( )
{
SetVisibleLayers( FULL_LAYERS );
m_VisibleElements = 0xFFFFFFFF;
}
void BOARD_DESIGN_SETTINGS::SetVisibleLayers( int aMask )
{
// Although Pcbnew uses only 29, Gerbview uses all 32 layers
m_VisibleLayers = aMask & m_EnabledLayers & FULL_LAYERS;
}
void BOARD_DESIGN_SETTINGS::SetLayerVisibility( int aLayerIndex, bool aNewState )
{
// Altough Pcbnew uses only 29, Gerbview uses all 32 layers
if( aLayerIndex < 0 || aLayerIndex >= 32 )
return;
if( aNewState && IsLayerEnabled( aLayerIndex ) )
m_VisibleLayers |= 1 << aLayerIndex;
else
m_VisibleLayers &= ~( 1 << aLayerIndex );
}
void BOARD_DESIGN_SETTINGS::SetElementVisibility( int aElementCategory, bool aNewState )
{
if( aElementCategory < 0 || aElementCategory >= END_PCB_VISIBLE_LIST )
return;
if( aNewState )
m_VisibleElements |= 1 << aElementCategory;
else
m_VisibleElements &= ~( 1 << aElementCategory );
}
void BOARD_DESIGN_SETTINGS::SetCopperLayerCount( int aNewLayerCount )
{
// if( aNewLayerCount < 2 ) aNewLayerCount = 2;
m_CopperLayerCount = aNewLayerCount;
// ensure consistency with the m_EnabledLayers member
m_EnabledLayers &= ~ALL_CU_LAYERS;
m_EnabledLayers |= LAYER_BACK;
if( m_CopperLayerCount > 1 )
m_EnabledLayers |= LAYER_FRONT;
for( int ii = 1; ii < aNewLayerCount - 1; ii++ )
m_EnabledLayers |= 1 << ii;
}
/**
* Function SetEnabledLayers
* changes the bit-mask of enabled layers
* @param aMask = The new bit-mask of enabled layers
*/
void BOARD_DESIGN_SETTINGS::SetEnabledLayers( int aMask )
{
// Back and front layers are always enabled.
aMask |= LAYER_BACK | LAYER_FRONT;
m_EnabledLayers = aMask;
// A disabled layer cannot be visible
m_VisibleLayers &= aMask;
// update m_CopperLayerCount to ensure its consistency with m_EnabledLayers
m_CopperLayerCount = 0;
for( int ii = 0; aMask && ii < NB_COPPER_LAYERS; ii++, aMask >>= 1 )
{
if( aMask & 1 )
m_CopperLayerCount++;
}
}