• Maciej Suminski's avatar
    Removed: · 78732f13
    Maciej Suminski authored
    - ZONE_CONTAINER::m_Netname field
    - ZONE_CONTAINER::SetNetName()
    - ZONE_CONTAINER::SetNet() [it uses the one in BOARD_CONNECTED_ITEM]
    - ZONE_CONTAINER::GetNetName() [instead BOARD_CONNECTED_ITEM::GetNetname is used]
    - ZONE_CONTAINER::SetNetNameFromNetCode()
    
    Performed tests:
    - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled.
    - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes).
    78732f13
class_zone.h 22.6 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654

/*
 * This program source code file is part of KiCad, a free EDA CAD application.
 *
 * Copyright (C) 2004 Jean-Pierre Charras, jaen-pierre.charras@gipsa-lab.inpg.com
 * Copyright (C) 1992-2011 KiCad Developers, see AUTHORS.txt for contributors.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, you may find one here:
 * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
 * or you may search the http://www.gnu.org website for the version 2 license,
 * or you may write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

/**
 * @file class_zone.h
 * @brief Classes to handle copper zones
 */

#ifndef CLASS_ZONE_H_
#define CLASS_ZONE_H_


#include <vector>
#include <gr_basic.h>
#include <class_board_item.h>
#include <class_board_connected_item.h>
#include <layers_id_colors_and_visibility.h>
#include <PolyLine.h>
#include <class_zone_settings.h>


class EDA_RECT;
class LINE_READER;
class EDA_DRAW_PANEL;
class PCB_EDIT_FRAME;
class BOARD;
class ZONE_CONTAINER;
class MSG_PANEL_ITEM;


/**
 * Struct SEGMENT
 * is a simple container used when filling areas with segments
 */
struct SEGMENT
{
    wxPoint m_Start;        // starting point of a segment
    wxPoint m_End;          // ending point of a segment

    SEGMENT() {}

    SEGMENT( const wxPoint& aStart, const wxPoint& aEnd )
    {
        m_Start = aStart;
        m_End = aEnd;
    }
};


/**
 * Class ZONE_CONTAINER
 * handles a list of polygons defining a copper zone.
 * A zone is described by a main polygon, a time stamp, a layer, and a net name.
 * Other polygons inside the main polygon are holes in the zone.
 */
class ZONE_CONTAINER : public BOARD_CONNECTED_ITEM
{
public:

    ZONE_CONTAINER( BOARD* parent );

    ZONE_CONTAINER( const ZONE_CONTAINER& aZone );

    ~ZONE_CONTAINER();

    /**
     * Function GetPosition
     * @return a wxPoint, position of the first point of the outline
     */
    const wxPoint& GetPosition() const;             // was overload
    void SetPosition( const wxPoint& aPos )     {}  // was overload

    /**
     * Function SetPriority
     * @param aPriority = the priority level
     */
    void SetPriority( unsigned aPriority ) { m_priority = aPriority; }

    /**
     * Function GetPriority
     * @return the priority level of this zone
     */
    unsigned GetPriority() const { return m_priority; }

    /**
     * Function copy
     * copy useful data from the source.
     * flags and linked list pointers are NOT copied
     */
    void Copy( ZONE_CONTAINER* src );

    void GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList );

    /**
     * Function Draw
     * Draws the zone outline.
     * @param panel = current Draw Panel
     * @param DC = current Device Context
     * @param aDrawMode = GR_OR, GR_XOR, GR_COPY ..
     * @param offset = Draw offset (usually wxPoint(0,0))
     */
    void Draw( EDA_DRAW_PANEL* panel,
               wxDC*           DC,
               GR_DRAWMODE     aDrawMode,
               const wxPoint&  offset = ZeroOffset );

    /**
     * Function DrawDrawFilledArea
     * Draws the filled  area for this zone (polygon list .m_FilledPolysList)
     * @param panel = current Draw Panel
     * @param DC = current Device Context
     * @param offset = Draw offset (usually wxPoint(0,0))
     * @param aDrawMode = GR_OR, GR_XOR, GR_COPY ..
     */
    void DrawFilledArea( EDA_DRAW_PANEL* panel,
                         wxDC*           DC,
                         GR_DRAWMODE     aDrawMode,
                         const wxPoint&  offset = ZeroOffset );

    /**
     * Function DrawWhileCreateOutline
     * Draws the zone outline when it is created.
     * The moving edges are in XOR graphic mode, old segment in draw_mode graphic mode
     * (usually GR_OR).  The closing edge has its own shape.
     * @param panel = current Draw Panel
     * @param DC = current Device Context
     * @param draw_mode = draw mode: OR, XOR ..
     */
    void DrawWhileCreateOutline( EDA_DRAW_PANEL* panel, wxDC* DC,
                                 GR_DRAWMODE draw_mode = GR_OR );

    /** Function GetBoundingBox (virtual)
     * @return an EDA_RECT that is the bounding box of the zone outline
     */
    const EDA_RECT GetBoundingBox() const;

    int GetClearance( BOARD_CONNECTED_ITEM* aItem = NULL ) const;

    /**
     * Function TestForCopperIslandAndRemoveInsulatedIslands
     * Remove insulated copper islands found in m_FilledPolysList.
     * @param aPcb = the board to analyze
     */
    void TestForCopperIslandAndRemoveInsulatedIslands( BOARD* aPcb );

    /**
     * Function CalculateSubAreaBoundaryBox
     * Calculates the bounding box of a a filled area ( list of CPolyPt )
     * use m_FilledPolysList as list of CPolyPt (that are the corners of one or more
     * polygons or filled areas )
     * @return an EDA_RECT as bounding box
     * @param aIndexStart = index of the first corner of a polygon (filled area)
     *                      in m_FilledPolysList
     * @param aIndexEnd = index of the last corner of a polygon in m_FilledPolysList
     */
    EDA_RECT CalculateSubAreaBoundaryBox( int aIndexStart, int aIndexEnd );

    /**
     * Function IsOnCopperLayer
     * @return true if this zone is on a copper layer, false if on a technical layer
     */
    bool IsOnCopperLayer( void ) const
    {
        return ( GetLayer() < FIRST_NON_COPPER_LAYER ) ? true : false;
    }

    /// How to fill areas: 0 = use filled polygons, 1 => fill with segments.
    void SetFillMode( int aFillMode )                   { m_FillMode = aFillMode; }
    int GetFillMode() const                             { return m_FillMode; }

    void SetThermalReliefGap( int aThermalReliefGap )   { m_ThermalReliefGap = aThermalReliefGap; }
    int GetThermalReliefGap( D_PAD* aPad = NULL ) const;

    void SetThermalReliefCopperBridge( int aThermalReliefCopperBridge )
    {
        m_ThermalReliefCopperBridge = aThermalReliefCopperBridge;
    }
    int GetThermalReliefCopperBridge( D_PAD* aPad = NULL ) const;

    void SetArcSegmentCount( int aArcSegCount ) { m_ArcToSegmentsCount = aArcSegCount; }
    int GetArcSegmentCount() const { return m_ArcToSegmentsCount; }

    bool IsFilled() const { return m_IsFilled; }
    void SetIsFilled( bool isFilled ) { m_IsFilled = isFilled; }

    int GetZoneClearance() const { return m_ZoneClearance; }
    void SetZoneClearance( int aZoneClearance ) { m_ZoneClearance = aZoneClearance; }

    ZoneConnection GetPadConnection( D_PAD* aPad = NULL ) const;
    void SetPadConnection( ZoneConnection aPadConnection ) { m_PadConnection = aPadConnection; }

    int GetMinThickness() const { return m_ZoneMinThickness; }
    void SetMinThickness( int aMinThickness ) { m_ZoneMinThickness = aMinThickness; }

    int GetSelectedCorner() const { return m_CornerSelection; }
    void SetSelectedCorner( int aCorner ) { m_CornerSelection = aCorner; }

    int GetLocalFlags() const { return m_localFlgs; }
    void SetLocalFlags( int aFlags ) { m_localFlgs = aFlags; }

    std::vector <SEGMENT>& FillSegments() { return m_FillSegmList; }
    const std::vector <SEGMENT>& FillSegments() const { return m_FillSegmList; }

    CPolyLine* Outline() { return m_Poly; }
    const CPolyLine* Outline() const { return const_cast< CPolyLine* >( m_Poly ); }

    void SetOutline( CPolyLine* aOutline ) { m_Poly = aOutline; }

    /**
     * Function HitTest
     * tests if a point is near an outline edge or a corner of this zone.
     * @param aRefPos A wxPoint to test
     * @return bool - true if a hit, else false
     */
    virtual bool HitTest( const wxPoint& aPosition );

    /**
     * Function HitTest
     * tests if a point is inside the zone area, i.e. inside the main outline
     * and outside holes.
     * @param aRefPos A wxPoint to test
     * @return bool - true if a hit, else false
     */
    bool HitTestInsideZone( const wxPoint& aPosition ) const
    {
        return m_Poly->TestPointInside( aPosition.x, aPosition.y );
    }

    /**
     * Function HitTestFilledArea
     * tests if the given wxPoint is within the bounds of a filled area of this zone.
     * @param aRefPos A wxPoint to test
     * @return bool - true if a hit, else false
     */
    bool HitTestFilledArea( const wxPoint& aRefPos ) const;

     /**
     * Function TransformSolidAreasShapesToPolygonSet
     * Convert solid areas full shapes to polygon set
     * (the full shape is the polygon area with a thick outline)
     * Used in 3D view
     * Arcs (ends of segments) are approximated by segments
     * @param aCornerBuffer = a buffer to store the polygons
     * @param aCircleToSegmentsCount = the number of segments to approximate a circle
     * @param aCorrectionFactor = the correction to apply to arcs radius to roughly
     * keep arc radius when approximated by segments
     */
    void TransformSolidAreasShapesToPolygonSet( CPOLYGONS_LIST& aCornerBuffer,
                                                int                    aCircleToSegmentsCount,
                                                double                 aCorrectionFactor );
    /**
     * Function BuildFilledSolidAreasPolygons
     * Build the filled solid areas data from real outlines (stored in m_Poly)
     * The solid areas can be more thna one on copper layers, and do not have holes
      ( holes are linked by overlapping segments to the main outline)
     * in order to have drawable (and plottable) filled polygons
     * @param aPcb: the current board (can be NULL for non copper zones)
     * @param aCornerBuffer: A reference to a buffer to store polygon corners, or NULL
     * if NULL (default:
     * - m_FilledPolysList is used to store solid areas polygons.
     * - on copper layers, tracks and other items shapes of other nets are
     * removed from solid areas
     * if not null:
     * Only the zone outline (with holes, if any) are stored in aCornerBuffer
     * with holes linked. Therfore only one polygon is created
     * @return true if OK, false if the solid areas cannot be calculated
     * This function calls AddClearanceAreasPolygonsToPolysList()
     * to add holes for pads and tracks and other items not in net.
     */
    bool BuildFilledSolidAreasPolygons( BOARD* aPcb, CPOLYGONS_LIST* aCornerBuffer = NULL );

    /**
     * Function CopyPolygonsFromKiPolygonListToFilledPolysList
     * Copy polygons stored in aKiPolyList to m_FilledPolysList
     * The previous m_FilledPolysList contents is replaced.
     * @param aKiPolyList = a KI_POLYGON_SET containing polygons.
     */
    void CopyPolygonsFromKiPolygonListToFilledPolysList( KI_POLYGON_SET& aKiPolyList );

    /**
     * Function CopyPolygonsFromFilledPolysListToKiPolygonList
     * Copy polygons from m_FilledPolysList to aKiPolyList
     * @param aKiPolyList = a KI_POLYGON_SET to fill by polygons.
     */
    void CopyPolygonsFromFilledPolysListToKiPolygonList( KI_POLYGON_SET& aKiPolyList );

    /**
     * Function AddClearanceAreasPolygonsToPolysList
     * Add non copper areas polygons (pads and tracks with clearance)
     * to a filled copper area
     * used in BuildFilledSolidAreasPolygons when calculating filled areas in a zone
     * Non copper areas are pads and track and their clearance area
     * The filled copper area must be computed before
     * BuildFilledSolidAreasPolygons() call this function just after creating the
     *  filled copper area polygon (without clearance areas
     * @param aPcb: the current board
     */
    void AddClearanceAreasPolygonsToPolysList( BOARD* aPcb );


     /**
     * Function TransformOutlinesShapeWithClearanceToPolygon
     * Convert the outlines shape to a polygon with no holes
     * inflated (optional) by max( aClearanceValue, the zone clearance)
     * (holes are linked to external outline by overlapping segments)
     * Used in filling zones calculations
     * Circles (vias) and arcs (ends of tracks) are approximated by segments
     * @param aCornerBuffer = a buffer to store the polygon
     * @param aClearanceValue = the clearance around the pad
     * @param aAddClearance = true to add a clearance area to the polygon
     *                      false to create the outline polygon.
     */
    void TransformOutlinesShapeWithClearanceToPolygon( CPOLYGONS_LIST& aCornerBuffer,
                                               int                    aClearanceValue,
                                               bool                   aAddClearance );
    /**
     * Function HitTestForCorner
     * tests if the given wxPoint near a corner
     * Set m_CornerSelection to -1 if nothing found, or index of corner
     * @return true if found
     * @param refPos : A wxPoint to test
     */
    bool HitTestForCorner( const wxPoint& refPos );

    /**
     * Function HitTestForEdge
     * tests if the given wxPoint is near a segment defined by 2 corners.
     * Set m_CornerSelection to -1 if nothing found, or index of the starting corner of vertice
     * @return true if found
     * @param refPos : A wxPoint to test
     */
    bool HitTestForEdge( const wxPoint& refPos );

    /** @copydoc BOARD_ITEM::HitTest(const EDA_RECT& aRect,
     *                               bool aContained = true, int aAccuracy ) const
     */
    bool HitTest( const EDA_RECT& aRect, bool aContained = true, int aAccuracy = 0 ) const;

    /**
     * Function Fill_Zone
     * Calculate the zone filling
     * The zone outline is a frontier, and can be complex (with holes)
     * The filling starts from starting points like pads, tracks.
     * If exists the old filling is removed
     * @param frame = reference to the main frame
     * @param DC = current Device Context
     * @param verbose = true to show error messages
     * @return error level (0 = no error)
     */
    int Fill_Zone( PCB_EDIT_FRAME* frame, wxDC* DC, bool verbose = true );

    /**
     * Function FillZoneAreasWithSegments
     *  Fill sub areas in a zone with segments with m_ZoneMinThickness width
     * A scan is made line per line, on the whole filled areas, with a step of m_ZoneMinThickness.
     * all intersecting points with the horizontal infinite line and polygons to fill are calculated
     * a list of SEGZONE items is built, line per line
     * @return number of segments created
     */
    int FillZoneAreasWithSegments();

    /**
     * Function UnFill
     * Removes the zone filling
     * @return true if a previous filling is removed, false if no change
     * (when no filling found)
     */
    bool UnFill();

    /* Geometric transformations: */

    /**
     * Function Move
     * Move the outlines
     * @param offset = moving vector
     */
    void Move( const wxPoint& offset );

    /**
     * Function MoveEdge
     * Move the outline Edge. m_CornerSelection is the start point of the outline edge
     * @param offset = moving vector
     */
    void MoveEdge( const wxPoint& offset );

    /**
     * Function Rotate
     * Move the outlines
     * @param centre = rot centre
     * @param angle = in 0.1 degree
     */
    void Rotate( const wxPoint& centre, double angle );

    /**
     * Function Flip
     * Flip this object, i.e. change the board side for this object
     * (like Mirror() but changes layer)
     * @param aCentre - the rotation point.
     */
    virtual void Flip( const wxPoint& aCentre );

    /**
     * Function Mirror
     * Mirror the outlines , relative to a given horizontal axis
     * the layer is not changed
     * @param mirror_ref = vertical axis position
     */
    void Mirror( const wxPoint& mirror_ref );

    /**
     * Function GetClass
     * returns the class name.
     * @return wxString
     */
    wxString GetClass() const
    {
        return wxT( "ZONE_CONTAINER" );
    }

    /** Access to m_Poly parameters
     */


    int GetNumCorners( void ) const
    {
        return m_Poly->GetCornersCount();
    }

    void RemoveAllContours( void )
    {
        m_Poly->RemoveAllContours();
    }

    const wxPoint& GetCornerPosition( int aCornerIndex ) const
    {
        return m_Poly->GetPos( aCornerIndex );
    }

    void SetCornerPosition( int aCornerIndex, wxPoint new_pos )
    {
        m_Poly->SetX( aCornerIndex, new_pos.x );
        m_Poly->SetY( aCornerIndex, new_pos.y );
    }

    void AppendCorner( wxPoint position )
    {
        m_Poly->AppendCorner( position.x, position.y );
    }

    int GetHatchStyle() const
    {
        return m_Poly->GetHatchStyle();
    }

    void SetHatchStyle( CPolyLine::HATCH_STYLE aStyle )
    {
        m_Poly->SetHatchStyle( aStyle );
    }

    /**
     * Function IsSame
     * tests if 2 zones are equivalent:
     * 2 zones are equivalent if they have same parameters and same outlines
     * info, filling is not taken into account
     * @param aZoneToCompare = zone to compare with "this"
     */
    bool IsSame( const ZONE_CONTAINER &aZoneToCompare );

   /**
     * Function ClearFilledPolysList
     * clears the list of filled polygons.
     */
    void ClearFilledPolysList()
    {
        m_FilledPolysList.RemoveAllContours();
    }

   /**
     * Function GetFilledPolysList
     * returns a reference to the list of filled polygons.
     * @return Reference to the list of filled polygons.
     */
    const CPOLYGONS_LIST& GetFilledPolysList() const
    {
        return m_FilledPolysList;
    }

   /**
     * Function AddFilledPolysList
     * sets the list of filled polygons.
     */
    void AddFilledPolysList( CPOLYGONS_LIST& aPolysList )
    {
        m_FilledPolysList = aPolysList;
    }

    /**
     * Function GetSmoothedPoly
     * returns a pointer to the corner-smoothed version of
     * m_Poly if it exists, otherwise it returns m_Poly.
     * @return CPolyLine* - pointer to the polygon.
     */
    CPolyLine* GetSmoothedPoly() const
    {
        if( m_smoothedPoly )
            return m_smoothedPoly;
        else
            return m_Poly;
    };

    void SetCornerSmoothingType( int aType ) { m_cornerSmoothingType = aType; };

    int  GetCornerSmoothingType() const { return m_cornerSmoothingType; };

    void SetCornerRadius( unsigned int aRadius )
    {
        m_cornerRadius = aRadius;
        if( m_cornerRadius > (unsigned int) Mils2iu( MAX_ZONE_CORNER_RADIUS_MILS ) )
            m_cornerRadius = Mils2iu( MAX_ZONE_CORNER_RADIUS_MILS );
    };

    unsigned int GetCornerRadius() const { return m_cornerRadius; };

    void AddPolygon( std::vector< wxPoint >& aPolygon );

    void AddFilledPolygon( CPOLYGONS_LIST& aPolygon )
    {
        m_FilledPolysList.Append( aPolygon );
    }

    void AddFillSegments( std::vector< SEGMENT >& aSegments )
    {
        m_FillSegmList.insert( m_FillSegmList.end(), aSegments.begin(), aSegments.end() );
    }

    virtual wxString GetSelectMenuText() const;

    virtual BITMAP_DEF GetMenuImage() const { return  add_zone_xpm; }

    virtual EDA_ITEM* Clone() const;

    /**
     * Accessors to parameters used in Keepout zones:
     */
    bool GetIsKeepout() const { return m_isKeepout; }
    bool GetDoNotAllowCopperPour() const { return m_doNotAllowCopperPour; }
    bool GetDoNotAllowVias() const { return m_doNotAllowVias; }
    bool GetDoNotAllowTracks() const { return m_doNotAllowTracks; }

    void SetIsKeepout( bool aEnable ) { m_isKeepout = aEnable; }
    void SetDoNotAllowCopperPour( bool aEnable ) { m_doNotAllowCopperPour = aEnable; }
    void SetDoNotAllowVias( bool aEnable ) { m_doNotAllowVias = aEnable; }
    void SetDoNotAllowTracks( bool aEnable ) { m_doNotAllowTracks = aEnable; }


#if defined(DEBUG)
    virtual void Show( int nestLevel, std::ostream& os ) const { ShowDummy( os ); }    // override
#endif


private:
    CPolyLine*            m_Poly;                ///< Outline of the zone.
    CPolyLine*            m_smoothedPoly;        // Corner-smoothed version of m_Poly
    int                   m_cornerSmoothingType;
    unsigned int          m_cornerRadius;

    /* Priority: when a zone outline is inside and other zone, if its priority is higher
     * the other zone priority, it will be created inside.
     * if priorities are equal, a DRC error is set
     */
    unsigned              m_priority;

    /* A zone outline can be a keepout zone.
     * It will be never filled, and DRC should test for pads, tracks and vias
     */
    bool                  m_isKeepout;

    /* For keepout zones only:
     * what is not allowed inside the keepout ( pads, tracks and vias )
     */
    bool                  m_doNotAllowCopperPour;
    bool                  m_doNotAllowVias;
    bool                  m_doNotAllowTracks;

    ZoneConnection        m_PadConnection;
    int                   m_ZoneClearance;           ///< Clearance value in internal units.
    int                   m_ZoneMinThickness;        ///< Minimum thickness value in filled areas.

    /** The number of segments to convert a circle to a polygon.  Valid values are
        #ARC_APPROX_SEGMENTS_COUNT_LOW_DEF or #ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF. */
    int                   m_ArcToSegmentsCount;

    /** True when a zone was filled, false after deleting the filled areas. */
    bool                  m_IsFilled;

    ///< Width of the gap in thermal reliefs.
    int                   m_ThermalReliefGap;

    ///< Width of the copper bridge in thermal reliefs.
    int                   m_ThermalReliefCopperBridge;


    /// How to fill areas: 0 => use filled polygons, 1 => fill with segments.
    int                   m_FillMode;

    /// The index of the corner being moved or -1 if no corner is selected.
    int                   m_CornerSelection;

    int                   m_localFlgs;                ///< Flags used in polygon calculations.


    /** Segments used to fill the zone (#m_FillMode ==1 ), when fill zone by segment is used.
     *  In this case the segments have #m_ZoneMinThickness width.
     */
    std::vector <SEGMENT> m_FillSegmList;

    /* set of filled polygons used to draw a zone as a filled area.
     * from outlines (m_Poly) but unlike m_Poly these filled polygons have no hole
     * (they are all in one piece)  In very simple cases m_FilledPolysList is same
     * as m_Poly.  In less simple cases (when m_Poly has holes) m_FilledPolysList is



     * a polygon equivalent to m_Poly, without holes but with extra outline segment
     * connecting "holes" with external main outline.  In complex cases an outline
     * described by m_Poly can have many filled areas
     */
    CPOLYGONS_LIST m_FilledPolysList;
};


#endif  // CLASS_ZONE_H_