lib_arc.cpp 24.3 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823
/*
 * This program source code file is part of KiCad, a free EDA CAD application.
 *
 * Copyright (C) 2004 Jean-Pierre Charras, jaen-pierre.charras@gipsa-lab.inpg.com
 * Copyright (C) 2004-2015 KiCad Developers, see change_log.txt for contributors.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, you may find one here:
 * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
 * or you may search the http://www.gnu.org website for the version 2 license,
 * or you may write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

/**
 * @file lib_arc.cpp
 */

#include <fctsys.h>
#include <gr_basic.h>
#include <macros.h>
#include <class_drawpanel.h>
#include <plot_common.h>
#include <trigo.h>
#include <wxstruct.h>
#include <richio.h>
#include <base_units.h>
#include <msgpanel.h>

#include <general.h>
#include <lib_arc.h>
#include <transform.h>

// Helper function
static inline wxPoint twoPointVector( const wxPoint &startPoint, const wxPoint &endPoint )
{
    return endPoint - startPoint;
}


//! @brief Given three points A B C, compute the circumcenter of the resulting triangle
//! reference: http://en.wikipedia.org/wiki/Circumscribed_circle
//! Coordinates of circumcenter in Cartesian coordinates
static wxPoint calcCenter( const wxPoint& A, const wxPoint& B, const wxPoint& C )
{
    double  circumCenterX, circumCenterY;
    double  Ax = (double) A.x;
    double  Ay = (double) A.y;
    double  Bx = (double) B.x;
    double  By = (double) B.y;
    double  Cx = (double) C.x;
    double  Cy = (double) C.y;

    wxPoint circumCenter;

    double  D = 2.0 * ( Ax * ( By - Cy ) + Bx * ( Cy - Ay ) + Cx * ( Ay - By ) );

    // prevent division / 0
    if( fabs( D ) < 1e-7 )
        D = 1e-7;

    circumCenterX = ( (Ay * Ay + Ax * Ax) * (By - Cy) +
                      (By * By + Bx * Bx) * (Cy - Ay) +
                      (Cy * Cy + Cx * Cx) * (Ay - By) ) / D;

    circumCenterY = ( (Ay * Ay + Ax * Ax) * (Cx - Bx) +
                      (By * By + Bx * Bx) * (Ax - Cx) +
                      (Cy * Cy + Cx * Cx) * (Bx - Ax) ) / D;

    circumCenter.x = (int) circumCenterX;
    circumCenter.y = (int) circumCenterY;

    return circumCenter;
}


LIB_ARC::LIB_ARC( LIB_PART*      aParent ) : LIB_ITEM( LIB_ARC_T, aParent )
{
    m_Radius        = 0;
    m_t1            = 0;
    m_t2            = 0;
    m_Width         = 0;
    m_Fill          = NO_FILL;
    m_isFillable    = true;
    m_typeName      = _( "Arc" );
    m_editState     = 0;
    m_lastEditState = 0;
    m_editCenterDistance = 0.0;
    m_editSelectPoint = ARC_STATUS_START;
    m_editDirection = 0;
}


bool LIB_ARC::Save( OUTPUTFORMATTER& aFormatter )
{
    int x1 = m_t1;

    if( x1 > 1800 )
        x1 -= 3600;

    int x2 = m_t2;

    if( x2 > 1800 )
        x2 -= 3600;

    aFormatter.Print( 0, "A %d %d %d %d %d %d %d %d %c %d %d %d %d\n",
                      m_Pos.x, m_Pos.y, m_Radius, x1, x2, m_Unit, m_Convert, m_Width,
                      fill_tab[m_Fill], m_ArcStart.x, m_ArcStart.y, m_ArcEnd.x,
                      m_ArcEnd.y );

    return true;
}


bool LIB_ARC::Load( LINE_READER& aLineReader, wxString& aErrorMsg )
{
    int startx, starty, endx, endy, cnt;
    char tmp[256] = "";
    char* line = (char*) aLineReader;

    cnt = sscanf( line + 2, "%d %d %d %d %d %d %d %d %255s %d %d %d %d",
                  &m_Pos.x, &m_Pos.y, &m_Radius, &m_t1, &m_t2, &m_Unit,
                  &m_Convert, &m_Width, tmp, &startx, &starty, &endx, &endy );
    if( cnt < 8 )
    {
        aErrorMsg.Printf( _( "Arc only had %d parameters of the required 8" ), cnt );
        return false;
    }

    if( tmp[0] == 'F' )
        m_Fill = FILLED_SHAPE;

    if( tmp[0] == 'f' )
        m_Fill = FILLED_WITH_BG_BODYCOLOR;

    NORMALIZE_ANGLE_POS( m_t1 );
    NORMALIZE_ANGLE_POS( m_t2 );

    // Actual Coordinates of arc ends are read from file
    if( cnt >= 13 )
    {
        m_ArcStart.x = startx;
        m_ArcStart.y = starty;
        m_ArcEnd.x   = endx;
        m_ArcEnd.y   = endy;
    }
    else
    {
        // Actual Coordinates of arc ends are not read from file
        // (old library), calculate them
        m_ArcStart.x = m_Radius;
        m_ArcStart.y = 0;
        m_ArcEnd.x   = m_Radius;
        m_ArcEnd.y   = 0;
        RotatePoint( &m_ArcStart.x, &m_ArcStart.y, -m_t1 );
        m_ArcStart.x += m_Pos.x;
        m_ArcStart.y += m_Pos.y;
        RotatePoint( &m_ArcEnd.x, &m_ArcEnd.y, -m_t2 );
        m_ArcEnd.x += m_Pos.x;
        m_ArcEnd.y += m_Pos.y;
    }

    return true;
}


bool LIB_ARC::HitTest( const wxPoint& aRefPoint ) const
{
    int mindist = GetPenSize() / 2;

    // Have a minimal tolerance for hit test
    if( mindist < MINIMUM_SELECTION_DISTANCE )
        mindist = MINIMUM_SELECTION_DISTANCE;

    return HitTest( aRefPoint, mindist, DefaultTransform );
}


bool LIB_ARC::HitTest( const wxPoint &aPosition, int aThreshold, const TRANSFORM& aTransform ) const
{

    if( aThreshold < 0 )
        aThreshold = GetPenSize() / 2;

    // TODO: use aTransMat to calculates parameters
    wxPoint relativePosition = aPosition;

    NEGATE( relativePosition.y );       // reverse Y axis

    int distance = KiROUND( GetLineLength( m_Pos, relativePosition ) );

    if( abs( distance - m_Radius ) > aThreshold )
        return false;

    // We are on the circle, ensure we are only on the arc, i.e. between
    //  m_ArcStart and m_ArcEnd

    wxPoint startEndVector = twoPointVector( m_ArcStart, m_ArcEnd);
    wxPoint startRelativePositionVector = twoPointVector( m_ArcStart, relativePosition );

    wxPoint centerStartVector = twoPointVector( m_Pos, m_ArcStart );
    wxPoint centerEndVector = twoPointVector( m_Pos, m_ArcEnd );
    wxPoint centerRelativePositionVector = twoPointVector( m_Pos, relativePosition );

    // Compute the cross product to check if the point is in the sector
    double crossProductStart = CrossProduct( centerStartVector, centerRelativePositionVector );
    double crossProductEnd = CrossProduct( centerEndVector, centerRelativePositionVector );

    // The cross products need to be exchanged, depending on which side the center point
    // relative to the start point to end point vector lies
    if( CrossProduct( startEndVector, startRelativePositionVector ) < 0 )
    {
        EXCHG( crossProductStart, crossProductEnd );
    }

    // When the cross products have a different sign, the point lies in sector
    // also check, if the reference is near start or end point
    return 	HitTestPoints( m_ArcStart, relativePosition, MINIMUM_SELECTION_DISTANCE ) ||
            HitTestPoints( m_ArcEnd, relativePosition, MINIMUM_SELECTION_DISTANCE ) ||
            ( crossProductStart <= 0 && crossProductEnd >= 0 );
}


EDA_ITEM* LIB_ARC::Clone() const
{
    return new LIB_ARC( *this );
}


int LIB_ARC::compare( const LIB_ITEM& aOther ) const
{
    wxASSERT( aOther.Type() == LIB_ARC_T );

    const LIB_ARC* tmp = ( LIB_ARC* ) &aOther;

    if( m_Pos.x != tmp->m_Pos.x )
        return m_Pos.x - tmp->m_Pos.x;

    if( m_Pos.y != tmp->m_Pos.y )
        return m_Pos.y - tmp->m_Pos.y;

    if( m_t1 != tmp->m_t1 )
        return m_t1 - tmp->m_t1;

    if( m_t2 != tmp->m_t2 )
        return m_t2 - tmp->m_t2;

    return 0;
}


void LIB_ARC::SetOffset( const wxPoint& aOffset )
{
    m_Pos += aOffset;
    m_ArcStart += aOffset;
    m_ArcEnd += aOffset;
}


bool LIB_ARC::Inside( EDA_RECT& aRect ) const
{
    return aRect.Contains( m_ArcStart.x, -m_ArcStart.y )
        || aRect.Contains( m_ArcEnd.x, -m_ArcEnd.y );
}


void LIB_ARC::Move( const wxPoint& aPosition )
{
    wxPoint offset = aPosition - m_Pos;
    m_Pos = aPosition;
    m_ArcStart += offset;
    m_ArcEnd   += offset;
}


void LIB_ARC::MirrorHorizontal( const wxPoint& aCenter )
{
    m_Pos.x -= aCenter.x;
    m_Pos.x *= -1;
    m_Pos.x += aCenter.x;
    m_ArcStart.x -= aCenter.x;
    m_ArcStart.x *= -1;
    m_ArcStart.x += aCenter.x;
    m_ArcEnd.x -= aCenter.x;
    m_ArcEnd.x *= -1;
    m_ArcEnd.x += aCenter.x;
    EXCHG( m_ArcStart, m_ArcEnd );
    EXCHG( m_t1, m_t2 );
    m_t1 = 1800 - m_t1;
    m_t2 = 1800 - m_t2;
    if( m_t1 > 3600 || m_t2 > 3600 )
    {
        m_t1 -= 3600;
        m_t2 -= 3600;
    }
    else if( m_t1 < -3600 || m_t2 < -3600 )
    {
        m_t1 += 3600;
        m_t2 += 3600;
    }
}

void LIB_ARC::MirrorVertical( const wxPoint& aCenter )
{
    m_Pos.y -= aCenter.y;
    m_Pos.y *= -1;
    m_Pos.y += aCenter.y;
    m_ArcStart.y -= aCenter.y;
    m_ArcStart.y *= -1;
    m_ArcStart.y += aCenter.y;
    m_ArcEnd.y -= aCenter.y;
    m_ArcEnd.y *= -1;
    m_ArcEnd.y += aCenter.y;
    EXCHG( m_ArcStart, m_ArcEnd );
    EXCHG( m_t1, m_t2 );
    m_t1 = - m_t1;
    m_t2 = - m_t2;
    if( m_t1 > 3600 || m_t2 > 3600 )
    {
        m_t1 -= 3600;
        m_t2 -= 3600;
    }
    else if( m_t1 < -3600 || m_t2 < -3600 )
    {
        m_t1 += 3600;
        m_t2 += 3600;
    }
}

void LIB_ARC::Rotate( const wxPoint& aCenter, bool aRotateCCW )
{
    int rot_angle = aRotateCCW ? -900 : 900;
    RotatePoint( &m_Pos, aCenter, rot_angle );
    RotatePoint( &m_ArcStart, aCenter, rot_angle );
    RotatePoint( &m_ArcEnd, aCenter, rot_angle );
    m_t1 -= rot_angle;
    m_t2 -= rot_angle;
    if( m_t1 > 3600 || m_t2 > 3600 )
    {
        m_t1 -= 3600;
        m_t2 -= 3600;
    }
    else if( m_t1 < -3600 || m_t2 < -3600 )
    {
        m_t1 += 3600;
        m_t2 += 3600;
    }
}



void LIB_ARC::Plot( PLOTTER* aPlotter, const wxPoint& aOffset, bool aFill,
                    const TRANSFORM& aTransform )
{
    wxASSERT( aPlotter != NULL );

    int t1 = m_t1;
    int t2 = m_t2;
    wxPoint pos = aTransform.TransformCoordinate( m_Pos ) + aOffset;

    aTransform.MapAngles( &t1, &t2 );

    if( aFill && m_Fill == FILLED_WITH_BG_BODYCOLOR )
    {
        aPlotter->SetColor( GetLayerColor( LAYER_DEVICE_BACKGROUND ) );
        aPlotter->Arc( pos, -t2, -t1, m_Radius, FILLED_SHAPE, 0 );
    }

    bool already_filled = m_Fill == FILLED_WITH_BG_BODYCOLOR;
    aPlotter->SetColor( GetLayerColor( LAYER_DEVICE ) );
    aPlotter->Arc( pos, -t2, -t1, m_Radius, already_filled ? NO_FILL : m_Fill, GetPenSize() );
}


int LIB_ARC::GetPenSize() const
{
    return ( m_Width == 0 ) ? GetDefaultLineThickness() : m_Width;
}


void LIB_ARC::drawEditGraphics( EDA_RECT* aClipBox, wxDC* aDC, EDA_COLOR_T aColor )
{
    // The edit indicators only get drawn when a new arc is being drawn.
    if( !IsNew() )
        return;

    // Use the last edit state so when the drawing switches from the end mode to the center
    // point mode, the last line between the center points gets erased.
    if( m_lastEditState == 1 )
    {
        GRLine( aClipBox, aDC, m_ArcStart.x, -m_ArcStart.y, m_ArcEnd.x, -m_ArcEnd.y, 0, aColor );
    }
    else
    {
        GRDashedLine( aClipBox, aDC, m_ArcStart.x, -m_ArcStart.y, m_Pos.x, -m_Pos.y, 0, aColor );
        GRDashedLine( aClipBox, aDC, m_ArcEnd.x, -m_ArcEnd.y, m_Pos.x, -m_Pos.y, 0, aColor );
    }
}


void LIB_ARC::drawGraphic( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aOffset,
                           EDA_COLOR_T aColor, GR_DRAWMODE aDrawMode, void* aData,
                           const TRANSFORM& aTransform )
{
    // Don't draw the arc until the end point is selected.  Only the edit indicators
    // get drawn at this time.
    if( IsNew() && m_lastEditState == 1 )
        return;

    wxPoint pos1, pos2, posc;
    EDA_COLOR_T color = GetLayerColor( LAYER_DEVICE );

    if( aColor < 0 )       // Used normal color or selected color
    {
        if( IsSelected() )
            color = GetItemSelectedColor();
    }
    else
    {
        color = aColor;
    }

    pos1 = aTransform.TransformCoordinate( m_ArcEnd ) + aOffset;
    pos2 = aTransform.TransformCoordinate( m_ArcStart ) + aOffset;
    posc = aTransform.TransformCoordinate( m_Pos ) + aOffset;
    int  pt1  = m_t1;
    int  pt2  = m_t2;
    bool swap = aTransform.MapAngles( &pt1, &pt2 );

    if( swap )
    {
        EXCHG( pos1.x, pos2.x );
        EXCHG( pos1.y, pos2.y );
    }

    GRSetDrawMode( aDC, aDrawMode );

    FILL_T fill = aData ? NO_FILL : m_Fill;

    if( aColor >= 0 )
        fill = NO_FILL;

    EDA_RECT* const clipbox  = aPanel? aPanel->GetClipBox() : NULL;

    if( fill == FILLED_WITH_BG_BODYCOLOR )
    {
        GRFilledArc( clipbox, aDC, posc.x, posc.y, pt1, pt2,
                     m_Radius, GetPenSize( ),
                     (m_Flags & IS_MOVED) ? color : GetLayerColor( LAYER_DEVICE_BACKGROUND ),
                     GetLayerColor( LAYER_DEVICE_BACKGROUND ) );
    }
    else if( fill == FILLED_SHAPE && !aData )
    {
        GRFilledArc( clipbox, aDC, posc.x, posc.y, pt1, pt2, m_Radius,
                     color, color );
    }
    else
    {

#ifdef DRAW_ARC_WITH_ANGLE

        GRArc( clipbox, aDC, posc.x, posc.y, pt1, pt2, m_Radius,
               GetPenSize(), color );
#else

        GRArc1( clipbox, aDC, pos1.x, pos1.y, pos2.x, pos2.y,
                posc.x, posc.y, GetPenSize(), color );
#endif
    }

    /* Set to one (1) to draw bounding box around arc to validate bounding box
     * calculation. */
#if 0
    EDA_RECT bBox = GetBoundingBox();
    GRRect( clipbox, aDC, bBox.GetOrigin().x, bBox.GetOrigin().y,
            bBox.GetEnd().x, bBox.GetEnd().y, 0, LIGHTMAGENTA );
#endif
}


const EDA_RECT LIB_ARC::GetBoundingBox() const
{
    int      minX, minY, maxX, maxY, angleStart, angleEnd;
    EDA_RECT rect;
    wxPoint  nullPoint, startPos, endPos, centerPos;
    wxPoint  normStart = m_ArcStart - m_Pos;
    wxPoint  normEnd   = m_ArcEnd - m_Pos;

    if( ( normStart == nullPoint ) || ( normEnd == nullPoint ) || ( m_Radius == 0 ) )
    {
        wxLogDebug( wxT("Invalid arc drawing definition, center(%d, %d) \
start(%d, %d), end(%d, %d), radius %d" ),
                    m_Pos.x, m_Pos.y, m_ArcStart.x, m_ArcStart.y, m_ArcEnd.x,
                    m_ArcEnd.y, m_Radius );
        return rect;
    }

    endPos     = DefaultTransform.TransformCoordinate( m_ArcEnd );
    startPos   = DefaultTransform.TransformCoordinate( m_ArcStart );
    centerPos  = DefaultTransform.TransformCoordinate( m_Pos );
    angleStart = m_t1;
    angleEnd   = m_t2;

    if( DefaultTransform.MapAngles( &angleStart, &angleEnd ) )
    {
        EXCHG( endPos.x, startPos.x );
        EXCHG( endPos.y, startPos.y );
    }

    /* Start with the start and end point of the arc. */
    minX = std::min( startPos.x, endPos.x );
    minY = std::min( startPos.y, endPos.y );
    maxX = std::max( startPos.x, endPos.x );
    maxY = std::max( startPos.y, endPos.y );

    /* Zero degrees is a special case. */
    if( angleStart == 0 )
        maxX = centerPos.x + m_Radius;

    /* Arc end angle wrapped passed 360. */
    if( angleStart > angleEnd )
        angleEnd += 3600;

    if( angleStart <= 900 && angleEnd >= 900 )          /* 90 deg */
        maxY = centerPos.y + m_Radius;

    if( angleStart <= 1800 && angleEnd >= 1800 )        /* 180 deg */
        minX = centerPos.x - m_Radius;

    if( angleStart <= 2700 && angleEnd >= 2700 )        /* 270 deg */
        minY = centerPos.y - m_Radius;

    if( angleStart <= 3600 && angleEnd >= 3600 )        /* 0 deg   */
        maxX = centerPos.x + m_Radius;

    rect.SetOrigin( minX, minY );
    rect.SetEnd( maxX, maxY );
    rect.Inflate( m_Width / 2, m_Width / 2 );

    return rect;
}


void LIB_ARC::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList )
{
    wxString msg;
    EDA_RECT bBox = GetBoundingBox();

    LIB_ITEM::GetMsgPanelInfo( aList );

    msg = StringFromValue( g_UserUnit, m_Width, true );

    aList.push_back( MSG_PANEL_ITEM( _( "Line Width" ), msg, BLUE ) );

    msg.Printf( wxT( "(%d, %d, %d, %d)" ), bBox.GetOrigin().x,
                bBox.GetOrigin().y, bBox.GetEnd().x, bBox.GetEnd().y );

    aList.push_back( MSG_PANEL_ITEM( _( "Bounding Box" ), msg, BROWN ) );
}


wxString LIB_ARC::GetSelectMenuText() const
{
    return wxString::Format( _( "Arc center (%s, %s), radius %s" ),
                             GetChars( CoordinateToString( m_Pos.x ) ),
                             GetChars( CoordinateToString( m_Pos.y ) ),
                             GetChars( CoordinateToString( m_Radius ) ) );
}


void LIB_ARC::BeginEdit( STATUS_FLAGS aEditMode, const wxPoint aPosition )
{
    wxCHECK_RET( ( aEditMode & ( IS_NEW | IS_MOVED | IS_RESIZED ) ) != 0,
                 wxT( "Invalid edit mode for LIB_ARC object." ) );

    if( aEditMode == IS_NEW )
    {
        m_ArcStart  = m_ArcEnd = aPosition;
        m_editState = m_lastEditState = 1;
    }
    else if( aEditMode == IS_MOVED )
    {
        m_initialPos = m_Pos;
        m_initialCursorPos = aPosition;
        SetEraseLastDrawItem();
    }
    else
    {
        // The arc center point has to be rotated with while adjusting the
        // start or end point, determine the side of this point and the distance
        // from the start / end point
        wxPoint middlePoint = wxPoint( (m_ArcStart.x + m_ArcEnd.x) / 2,
                                       (m_ArcStart.y + m_ArcEnd.y) / 2 );
        wxPoint centerVector   = m_Pos - middlePoint;
        wxPoint startEndVector = twoPointVector( m_ArcStart, m_ArcEnd );
        m_editCenterDistance = EuclideanNorm( centerVector );

        // Determine on which side is the center point
        m_editDirection = CrossProduct( startEndVector, centerVector ) ? 1 : -1;

        // Drag either the start, end point or the outline
        if( HitTestPoints( m_ArcStart, aPosition, MINIMUM_SELECTION_DISTANCE ) )
        {
            m_editSelectPoint = ARC_STATUS_START;
        }
        else if( HitTestPoints( m_ArcEnd, aPosition, MINIMUM_SELECTION_DISTANCE ) )
        {
            m_editSelectPoint = ARC_STATUS_END;
        }
        else
        {
            m_editSelectPoint = ARC_STATUS_OUTLINE;
        }

        m_editState = 0;
        SetEraseLastDrawItem();
    }

    m_Flags = aEditMode;
}


bool LIB_ARC::ContinueEdit( const wxPoint aPosition )
{
    wxCHECK_MSG( ( m_Flags & ( IS_NEW | IS_MOVED | IS_RESIZED ) ) != 0, false,
                   wxT( "Bad call to ContinueEdit().  LIB_ARC is not being edited." ) );

    if( m_Flags == IS_NEW )
    {
        if( m_editState == 1 )        // Second position yields the arc segment length.
        {
            m_ArcEnd = aPosition;
            m_editState = 2;
            SetEraseLastDrawItem( false );
            return true;              // Need third position to calculate center point.
        }
    }

    return false;
}


void LIB_ARC::EndEdit( const wxPoint& aPosition, bool aAbort )
{
    wxCHECK_RET( ( m_Flags & ( IS_NEW | IS_MOVED | IS_RESIZED ) ) != 0,
                   wxT( "Bad call to EndEdit().  LIB_ARC is not being edited." ) );

    SetEraseLastDrawItem( false );
    m_lastEditState = 0;
    m_editState = 0;
    m_Flags = 0;
}


void LIB_ARC::calcEdit( const wxPoint& aPosition )
{
    if( m_Flags == IS_RESIZED )
    {
        wxPoint newCenterPoint, startPos, endPos;

        // Choose the point of the arc to be adjusted
        if( m_editSelectPoint == ARC_STATUS_START )
        {
            startPos = aPosition;
            endPos   = m_ArcEnd;
        }
        else if( m_editSelectPoint == ARC_STATUS_END )
        {
            endPos   = aPosition;
            startPos = m_ArcStart;
        }
        else
        {
            // Use the cursor for adjusting the arc curvature
            startPos = m_ArcStart;
            endPos   = m_ArcEnd;

            // If the distance is too small, use the old center point
            // else the new center point is calculated over the three points start/end/cursor
            if( DistanceLinePoint( startPos, endPos, aPosition ) > MINIMUM_SELECTION_DISTANCE )
            {
                newCenterPoint = calcCenter( startPos, aPosition, endPos );
            }
            else
            {
                newCenterPoint = m_Pos;
            }

            // Determine if the arc angle is larger than 180 degrees -> this happens if both
            // points (cursor position, center point) lie on the same side of the vector
            // start-end
            double  crossA = CrossProduct( twoPointVector( startPos, endPos ),
                                        twoPointVector( endPos, aPosition ) );
            double  crossB = CrossProduct( twoPointVector( startPos, endPos ),
                                        twoPointVector( endPos, newCenterPoint ) );

            if( ( crossA < 0 && crossB < 0 ) || ( crossA >= 0 && crossB >= 0 ) )
                newCenterPoint = m_Pos;
        }

        if( m_editSelectPoint == ARC_STATUS_START || m_editSelectPoint == ARC_STATUS_END )
        {
            // Compute the new center point when the start/end points are modified
            wxPoint middlePoint = wxPoint( (startPos.x + endPos.x) / 2,
                                           (startPos.y + endPos.y) / 2 );

            wxPoint startEndVector = twoPointVector( startPos, endPos );
            wxPoint perpendicularVector = wxPoint( -startEndVector.y, startEndVector.x );
            double  lengthPerpendicularVector = EuclideanNorm( perpendicularVector );

            // prevent too large values, division / 0
            if( lengthPerpendicularVector < 1e-1 )
                lengthPerpendicularVector = 1e-1;

            perpendicularVector.x = (int) ( (double) perpendicularVector.x *
                                            m_editCenterDistance /
                                            lengthPerpendicularVector ) * m_editDirection;
            perpendicularVector.y = (int) ( (double) perpendicularVector.y *
                                            m_editCenterDistance /
                                            lengthPerpendicularVector ) * m_editDirection;

            newCenterPoint = middlePoint + perpendicularVector;

            m_ArcStart = startPos;
            m_ArcEnd   = endPos;
        }

        m_Pos = newCenterPoint;
        calcRadiusAngles();
    }
    else if( m_Flags == IS_NEW )
    {
        if( m_editState == 1 )
        {
            m_ArcEnd = aPosition;
        }

        if( m_editState != m_lastEditState )
            m_lastEditState = m_editState;

        // Keep the arc center point up to date.  Otherwise, there will be edit graphic
        // artifacts left behind from the initial draw.
        int dx, dy;
        int cX, cY;
        double angle;

        cX = aPosition.x;
        cY = aPosition.y;

        dx = m_ArcEnd.x - m_ArcStart.x;
        dy = m_ArcEnd.y - m_ArcStart.y;
        cX -= m_ArcStart.x;
        cY -= m_ArcStart.y;
        angle = ArcTangente( dy, dx );
        RotatePoint( &dx, &dy, angle );     /* The segment dx, dy is horizontal
                                             * -> Length = dx, dy = 0 */
        RotatePoint( &cX, &cY, angle );
        cX = dx / 2;           /* cX, cY is on the median segment 0.0 a dx, 0 */

        RotatePoint( &cX, &cY, -angle );
        cX += m_ArcStart.x;
        cY += m_ArcStart.y;
        m_Pos.x = cX;
        m_Pos.y = cY;
        calcRadiusAngles();

        SetEraseLastDrawItem();
    }
    else if( m_Flags == IS_MOVED )
    {
        Move( m_initialPos + aPosition - m_initialCursorPos );
    }
}


void LIB_ARC::calcRadiusAngles()
{
    wxPoint centerStartVector = twoPointVector( m_Pos, m_ArcStart );
    wxPoint centerEndVector   = twoPointVector( m_Pos, m_ArcEnd );

    m_Radius = KiROUND( EuclideanNorm( centerStartVector ) );

    // Angles in eeschema are still integers
    m_t1 = KiROUND( ArcTangente( centerStartVector.y, centerStartVector.x ) );
    m_t2 = KiROUND( ArcTangente( centerEndVector.y, centerEndVector.x ) );

    NORMALIZE_ANGLE_POS( m_t1 );
    NORMALIZE_ANGLE_POS( m_t2 );  // angles = 0 .. 3600

    // Restrict angle to less than 180 to avoid PBS display mirror Trace because it is
    // assumed that the arc is less than 180 deg to find orientation after rotate or mirror.
    if( (m_t2 - m_t1) > 1800 )
        m_t2 -= 3600;
    else if( (m_t2 - m_t1) <= -1800 )
        m_t2 += 3600;

    while( (m_t2 - m_t1) >= 1800 )
    {
        m_t2--;
        m_t1++;
    }

    while( (m_t1 - m_t2) >= 1800 )
    {
        m_t2++;
        m_t1--;
    }

    NORMALIZE_ANGLE_POS( m_t1 );

    if( !IsMoving() )
        NORMALIZE_ANGLE_POS( m_t2 );
}