removed zed_ezynq.h

zed_ezynq.h

-/*
- * (C) Copyright 2013 Elphel, Inc.
- *
- * Configuration for Microzed RBL header
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 3 of
- * the License, or (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __CONFIG_EZYNQ_H
-#define __CONFIG_EZYNQ_H
-#define CONFIG_EZYNQ_OCM
-#define CONFIG_EZYNQ_MIO_0_VOLT           3.3
-#define CONFIG_EZYNQ_MIO_1_VOLT           1.8
-#define CONFIG_EZYNQ_QUADSPI_0__ATTRIB    SLOW 
-#define CONFIG_EZYNQ_MIO_ETH_0__ATTRIB    SLOW
-#define CONFIG_EZYNQ_MIO_ETH_MDIO__ATTRIB SLOW
-#define CONFIG_EZYNQ_MIO_USB_0__ATTRIB    SLOW
-#define CONFIG_EZYNQ_MIO_SDIO_0           40 // 16,28,40
-#define CONFIG_EZYNQ_MIO_SDIO_0__ATTRIB   SLOW
-#define CONFIG_EZYNQ_MIO_SDCD_0           46 //#any but 7,8
-#define CONFIG_EZYNQ_MIO_SDWP_0           50 //#any but 7,8
-#define CONFIG_EZYNQ_MIO_UART_1           48 //#  8+4*N
-
-/*
- //#debug
-//#define CONFIG_EZYNQ_UART_LOOPBACK_1=y
-
-Red LED - pullup, input - on,
-output (or undefined) -   off
-
-#define CONFIG_EZYNQ_MIO_PULLUP_EN_47
-#define CONFIG_EZYNQ_MIO_PULLUP_DIS_0
-#define CONFIG_EZYNQ_MIO_INOUT_47   OUT
-#define CONFIG_EZYNQ_MIO_INOUT_47=   IN
-#define CONFIG_EZYNQ_MIO_INOUT_47=   BIDIR
-*/
-
-#define CONFIG_EZYNQ_BOOT_USERDEF           0x1010000 /* # 0x1234567 # will be saved in the file header */
-#define CONFIG_EZYNQ_BOOT_OCM_OFFSET        0xa40     /*  # 0x8C0   # start of OCM data relative to the flash image start >=0x8C0, 63-bytes aligned */
-#define CONFIG_EZYNQ_BOOT_OCM_IMAGE_LENGTH  0x1400c   /*  # 0#0x30000 # number of bytes to load to the OCM memory, <=  0x30000 */
-#define CONFIG_EZYNQ_START_EXEC             0x00      /*  # start of execution address */
-#define CONFIG_EZYNQ_RESERVED44             0         /*  # documented as 0, but actually 1 */
-#endif /* __CONFIG_EZYNQ_H */
\ No newline at end of file