updated binaries

images/elphel393/boot.bin

 ￪￪￪￪￪￪￪￪晕馪塎䱘ā쀈ʞĀʞĀ紗᛼øဒЇøࠇøဂఇøဒဇøဂᐇøဂ᠇øဂᰇøဂ øဒ␇øဂ⠇øဂⰇøဂ〇øဂ㐇øဂ㠇øᄒ㰇ø䀇øȂ䐇øȂ䠇øȂ䰇øȂ倇øȂ吇øȂ堇ø̂將ø̂怇ø̂搇ø̂标ø̂氇ø̂瀇øВ琇øԒ砇øВ簇øԒ耇øВ萇øВ蠇øВ谇øВ逇øԒ鐇øВ頇øВ鰇øВꀇø耒ꐇø耒ꠇø耒갇ø耒뀇ø耒됇ø耒렇ø밇ø쀇øĒ쐇ø젇ø䀒찇ø䀒퀇ø耒퐇ø耒〈ø㼀　䀋ø䐋ø䠋ø爆䰋ø爆個ø理吋ø理堋ø尋øᲆ혀怋øᲆ豈搋øᲆ豈栋øᲆ혀氋ø怂`ø耀Ѡø脐ࡠøླྀ쀃ౠøĐၠøŀĀᑠøᨨЀᡠø퉘ᱠøɲ⁠ø큲ࠧ①ø⡠øܨⱠøࠀだø〉Ѐ㑠ø吐Ā㡠ø㱠ø眇䁠ø䑠ø晦昏䡠øÀ̀偠øŷ塠ø屠ø͐恠ø㸀摠øȀ桠ø䅁⠀池øဖ硠øᅡ䘀籠ø∢̀ꁠø€ꑠøȈ‐ꡠø珋逆걠ø︁끠ø￿＜둠ø론ø昀 쑠ø̀쑠ø졠øøøࠀᑡøᡡøĀ@ᱡøĀ@⁡øĀ@②øĀ@ⱡøちø㑡ø㡡ø䁡ø㔀䑡ø㔀䡡ø㔀䱡ø㔀呡ø塡ø屡ø恡ø桡ø㔀污ø㔀灡ø㔀瑡ø㔀籡ø䀀聡ø䀀葡ø䀀衡ø䀀遡ø胀Ȁ鑡ø苼ĀѢøࡢø＃ౢø＃ၢø＃ᑢø＃ᡢø＃ᱢø＃⁢ø＃③ø＃ꡢø걢ø끢øᕑ둢øؑ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ༀêᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥䀀䀀䀀䀀䀀䀀䀀귞￫ሀê࿡ἐâᨀ㇣ἀ쀓ጀ耓쀀胣ð⧡ဏᇮȊ샣ဏǮ砀鿥ဏ೮؀ëᨀë렃ëᔏ߮騏߮锏߮ỿ⿡￪ꃣᜏ࣮ᔏ߮픏߮騏߮锏߮ဏᇮȊ샣܀샣Ȁ胣ȋ胣Ċ胣ဏǮ๐ꃡဟხ℺ꃡ༰ϢཀǢ̢ꃡȠ蓡װꃡê借ᇮ̖臣̖臣借Ǯ濰翵ယđ臣ယ໰ꃡర駥၀ⷩꌴꃡ꠰觥䐠鿥06若࠶鋥＼菣̰菣࠶若ⰰ鿥Ѐ鏥⠰鿥ीꃡꠠ駥鈣菠⌓ꃡ蝃ë됀蓥ꃣ뀀蓥ႀ뷨퍍成ꠀ駥ỿ⿡၀ⷩᬁë␃ëกëꃣႀ뷨ⷩ㸳ꃣയ෣ࠠ菥ꠣ鿥!菥С菥ࠡ菥鰣鿥!菥ȩ䋢С菥Ȫ䋢ࠡ菥蠣鿥အ菥㈪苢ᐡ菥ᤪ苢ᠡ菥琣鿥!菥ȩ䋢С菥Ȫ䋢ࠡ菥怣鿥‡菥尣鿥␡菥̣苢㔬苢⠡菥䰣鿥Ⱑ菥Đꃣ㠑菥 ꃣ㰡菥㠃鿥䀁菥㐃鿥䐁菥Ǫã䣡菥njꃣ䳁菥僡菥Ǩˣ員菥壁菥封菥怡菥̊ã搁菥ąã栁菥氡菥鿥瀡菥耡菥鿥逡菥ꀡ菥쐑菥఑鏥ܐǢ܀凣ﯿ：਩ꃣ!菥ȨꃣС菥Ḫꃣࠡ菥Ġꃣఢ菥ဢ菥儀ꃣᐂ菥ᄀꃣ᠂菥␢菥Ԡꃣ⠢菥̠ꃣ㐢菥 ꃣఢ菥ဢ菥ᐢ菥ᠢ菥␢菥⠢菥㐢菥าꃣ䨯ꃣ 菥†ꃣР菥᠐菥Ḡꃣ㐠菥ᜡã 菥 鏥̀ዣﳿ：㐂鿥ë〲鿥耀鏥ë⠂鿥ë㹃ꃣ 鿥ë々铥ëం鿥ëℰꃣ瀻蓥‰ꃣ瀻蓥̸ã瀻蓥琻铥ȊᏣﳿ＊鿥脠ꃣ 菥吠鏥܀ዣﳿ＊퐁鿥촀ëë0ꃣ鏥ģ菢а菢̈口若刺：뀁鿥@ꃣ숀ëꡡ鿥ꡱ鿥ŀ蓢؀ꃡ봀ëPꃣЀꃡ쐀ë܀ꃡ렀ë԰ꃡ 鏥а菢̈口ɐ藠﫿：瀁鿥뀀ëԀꃡ렀ë搡鿥Pꃣijꃣ鏥а菢Ȁ叡Ő藠﫿：䠁鿥ꐀëԀꃡ가ëᐁ鿥ꀀë̀哣：Ё鿥鰀ëdz迢ꃡꃡꃡᐱ鿥 ꃣ䀠菥鿥ࠡ鿥㐠菥 ⠠菥㸳ꃣἠꃣဩ菥ijꃣ鿥鏥㼓菢а菢Ȁ叡臥刺：㸳ꃣ ꃣ䀢菥〔菥ᰦ菥ఠꃣ됀鿥&菥蔀ëഀꃣ猀ë਀ꃣ焀ëฒꃣࠨãⰰ釥ȰϠࠀ口ﯿ：ฒꃣࠨãⰰ釥ȰϠࠀ口ﯿ：㌂ëꃣ뷨ႠĀᆀȀ삢ༀႀȀ̀‌䔄吁Ą 
က

u-boot-tree/arch/arm/mach-zynq/Kconfig

 if ARCH_ZYNQ
 
-config ZYNQ_CUSTOM_INIT
-	bool "Use custom ps7_init provided by Xilinx tool"
-	help
-	  U-Boot includes ps7_init_gpl.[ch] for some Zynq board variants.
-	  If you want to override them with customized ones
-	  or ps7_init code for your board is missing, please say Y here
-	  and add ones into board/xilinx/zynq/custom_hw_platform/ directory.
+config TARGET_ELPHEL393
+    bool "Elphel 10393 Zynq Board"
+    default y
 
-choice
-	prompt "Xilinx Zynq board select"
-	default TARGET_ZYNQ_ZC702
+config SPL_LDSCRIPT
+	default "arch/arm/mach-zynq/u-boot-spl.lds"
 
-config TARGET_ZYNQ_ZED
-	bool "Zynq ZedBoard"
+config SPL_FAT_SUPPORT
+	default y
 
-config TARGET_ZYNQ_MICROZED
-	bool "Zynq MicroZed"
+config SPL_LIBCOMMON_SUPPORT
+	default y
 
-config TARGET_ZYNQ_PICOZED
-	bool "Zynq PicoZed"
+config SPL_LIBDISK_SUPPORT
+	default y
 
-config TARGET_ZYNQ_ZC702
-	bool "Zynq ZC702 Board"
+config SPL_LIBGENERIC_SUPPORT
+	default y
 
-config TARGET_ZYNQ_ZC706
-	bool "Zynq ZC706 Board"
+config SPL_MMC_SUPPORT
+	default y if MMC_SDHCI_ZYNQ
 
-config TARGET_ZYNQ_ZC770
-	bool "Zynq ZC770 Board"
-	select ZYNQ_CUSTOM_INIT
+config SPL_SERIAL_SUPPORT
+	default y
 
-config TARGET_ZYNQ_ZYBO
-	bool "Zynq Zybo Board"
+config SPL_SPI_FLASH_SUPPORT
+	default y if ZYNQ_QSPI
 
-config TARGET_ELPHEL393
-        bool "Zynq Elphel 10393 Board"
+config SPL_SPI_SUPPORT
+	default y if ZYNQ_QSPI
 
-endchoice
+config ZYNQ_DDRC_INIT
+	bool "Zynq DDRC initialization"
+	default y
+	help
+	  This option used to perform DDR specific initialization
+	  if required. There might be cases like ddr less where we
+	  want to skip ddr init and this option is useful for it.
 
 config SYS_BOARD
+	string "Board name"
 	default "elphel393" if TARGET_ELPHEL393
 	default "zynq"
 
 config SYS_VENDOR
+	string "Vendor name"
 	default "elphel" if TARGET_ELPHEL393
 	default "xilinx"
 
@@ -51,13 +53,28 @@ config SYS_SOC
 	default "zynq"
 
 config SYS_CONFIG_NAME
-	default "zynq_zed" if TARGET_ZYNQ_ZED
-	default "zynq_microzed" if TARGET_ZYNQ_MICROZED
-	default "zynq_picozed" if TARGET_ZYNQ_PICOZED
-	default "zynq_zc70x" if TARGET_ZYNQ_ZC702
-	default "zynq_zc706" if TARGET_ZYNQ_ZC706
-	default "zynq_zc770" if TARGET_ZYNQ_ZC770
-	default "zynq_zybo" if TARGET_ZYNQ_ZYBO
+	string "Board configuration name"
 	default "elphel393" if TARGET_ELPHEL393
+	default "zynq-common"
+	help
+	  This option contains information about board configuration name.
+	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+	  will be used for board configuration.
+
+config SYS_MALLOC_F_LEN
+	default 0x600
+
+config SYS_MALLOC_LEN
+	default 0x1400000
+
+config BOOT_INIT_FILE
+	string "boot.bin init register filename"
+	default ""
+	help
+	  Add register writes to boot.bin format (max 256 pairs).
+	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+
+config ZYNQ_SDHCI_MAX_FREQ
+	default 52000000
 
 endif