Commit 74255e71 authored by Oleg Dzhimiev's avatar Oleg Dzhimiev

updated binaries

parent 9239e759
B↑↑↑↑↑↑↑↑晕馪塎䱘ā쀈ʞĀʞĀ紗᛼øဒЇøࠇøဂఇøဒဇøဂᐇøဂ᠇øဂᰇøဂ øဒ␇øဂ⠇øဂⰇøဂ〇øဂ㐇øဂ㠇øᄒ㰇ø䀇øȂ䐇øȂ䠇øȂ䰇øȂ倇øȂ吇øȂ堇ø̂將ø̂怇ø̂搇ø̂标ø̂氇ø̂瀇øВ琇øԒ砇øВ簇øԒ耇øВ萇øВ蠇øВ谇øВ逇øԒ鐇øВ頇øВ鰇øВꀇø耒ꐇø耒ꠇø耒갇ø耒뀇ø耒됇ø耒렇ø밇ø쀇øĒ쐇ø젇ø䀒찇ø䀒퀇ø耒퐇ø耒〈ø㼀 䀋ø䐋ø䠋ø爆䰋ø爆個ø理吋ø理堋ø尋øᲆ혀怋øᲆ豈搋øᲆ豈栋øᲆ혀氋ø怂`ø耀Ѡø脐ࡠøླྀ쀃ౠøĐၠøŀĀᑠøᨨЀᡠø퉘ᱠøɲ⁠ø큲ࠧ①ø⡠øܨⱠøࠀだø〉Ѐ㑠ø吐Ā㡠ø㱠ø眇䁠ø䑠ø晦昏䡠øÀ̀偠øŷ塠ø屠ø͐恠ø㸀摠øȀ桠ø䅁⠀池øဖ硠øᅡ䘀籠ø∢̀ꁠø€ꑠøȈ‐ꡠø珋逆걠ø︁끠ø￿<둠ø론ø昀 쑠ø̀쑠ø졠øøøࠀᑡøᡡøĀ@ᱡøĀ@⁡øĀ@②øĀ@ⱡøちø㑡ø㡡ø䁡ø㔀䑡ø㔀䡡ø㔀䱡ø㔀呡ø塡ø屡ø恡ø桡ø㔀污ø㔀灡ø㔀瑡ø㔀籡ø䀀聡ø䀀葡ø䀀衡ø䀀遡ø胀Ȁ鑡ø苼ĀѢøࡢø#ౢø#ၢø#ᑢø#ᡢø#ᱢø#⁢ø#③ø#ꡢø걢ø끢øᕑ둢øؑ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ༀêᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥䀀䀀䀀䀀䀀䀀䀀귞→ሀê࿡ἐâᨀ㇣ἀ쀓ጀ耓쀀胣ð⧡ဏᇮȊ샣ဏǮ砀鿥ဏ೮؀ëᨀë렃ëᔏ߮騏߮锏߮ỿ⿡↑ꃣᜏ࣮ᔏ߮픏߮騏߮锏߮ဏᇮȊ샣܀샣Ȁ胣ȋ胣Ċ胣ဏǮ๐ꃡဟხ℺ꃡ༰ϢཀǢ̢ꃡȠ蓡װꃡê借ᇮ̖臣̖臣借Ǯ濰翵ယđ臣ယ໰ꃡర駥၀ⷩꌴꃡ꠰觥䐠鿥06若࠶鋥\菣̰菣࠶若ⰰ鿥Ѐ鏥⠰鿥ीꃡꠠ駥鈣菠⌓ꃡ蝃ë됀蓥ꃣ뀀蓥ႀ뷨퍍成ꠀ駥ỿ⿡၀ⷩᬁë␃ëกëꃣႀ뷨ⷩ㸳ꃣയ෣ࠠ菥ꠣ鿥!菥С菥ࠡ菥鰣鿥!菥ȩ䋢С菥Ȫ䋢ࠡ菥蠣鿥အ菥㈪苢ᐡ菥ᤪ苢ᠡ菥琣鿥!菥ȩ䋢С菥Ȫ䋢ࠡ菥怣鿥‡菥尣鿥␡菥̣苢㔬苢⠡菥䰣鿥Ⱑ菥Đꃣ㠑菥 ꃣ㰡菥㠃鿥䀁菥㐃鿥䐁菥Ǫã䣡菥njꃣ䳁菥僡菥Ǩˣ員菥壁菥封菥怡菥̊ã搁菥ąã栁菥氡菥鿥瀡菥耡菥鿥逡菥ꀡ菥쐑菥఑鏥ܐǢ܀凣ﯿ:਩ꃣ!菥ȨꃣС菥Ḫꃣࠡ菥Ġꃣఢ菥ဢ菥儀ꃣᐂ菥ᄀꃣ᠂菥␢菥Ԡꃣ⠢菥̠ꃣ㐢菥 ꃣఢ菥ဢ菥ᐢ菥ᠢ菥␢菥⠢菥㐢菥าꃣ䨯ꃣ 菥†ꃣР菥᠐菥Ḡꃣ㐠菥ᜡã 菥 鏥̀ዣﳿ:㐂鿥ë〲鿥耀鏥ë⠂鿥ë㹃ꃣ 鿥ë々铥ëం鿥ëℰꃣ瀻蓥‰ꃣ瀻蓥̸ã瀻蓥琻铥ȊᏣﳿ*鿥脠ꃣ 菥吠鏥܀ዣﳿ*퐁鿥촀ëë0ꃣ鏥ģ菢а菢̈口若刺:뀁鿥@ꃣ숀ëꡡ鿥ꡱ鿥ŀ蓢؀ꃡ봀ëPꃣЀꃡ쐀ë܀ꃡ렀ë԰ꃡ 鏥а菢̈口ɐ藠﫿:瀁鿥뀀ëԀꃡ렀ë搡鿥Pꃣijꃣ鏥а菢Ȁ叡Ő藠﫿:䠁鿥ꐀëԀꃡ가ëᐁ鿥ꀀë̀哣:Ё鿥鰀ëdz迢ꃡꃡꃡᐱ鿥 ꃣ䀠菥鿥ࠡ鿥㐠菥 ⠠菥㸳ꃣἠꃣဩ菥ijꃣ鿥鏥㼓菢а菢Ȁ叡臥刺:㸳ꃣ ꃣ䀢菥〔菥ᰦ菥ఠꃣ됀鿥&菥蔀ëഀꃣ猀ë਀ꃣ焀ëฒꃣࠨãⰰ釥ȰϠࠀ口ﯿ:ฒꃣࠨãⰰ釥ȰϠࠀ口ﯿ:㌂ëꃣ뷨ႠĀᆀȀ삢ༀႀȀ̀‌䔄吁Ą က B↑↑↑↑↑↑↑↑晕馪塎䱘ā쀈ʞĀʞĀ紗᛼øဒЇøࠇøဂఇøဒဇøဂᐇøဂ᠇øဂᰇøဂ øဒ␇øဂ⠇øဂⰇøဂ〇øဂ㐇øဂ㠇øᄒ㰇ø䀇øȂ䐇øȂ䠇øȂ䰇øȂ倇øȂ吇øȂ堇ø̂將ø̂怇ø̂搇ø̂标ø̂氇ø̂瀇øВ琇øԒ砇øВ簇øԒ耇øВ萇øВ蠇øВ谇øВ逇øԒ鐇øВ頇øВ鰇øВꀇø耒ꐇø耒ꠇø耒갇ø耒뀇ø耒됇ø耒렇ø밇ø쀇øĒ쐇ø젇ø䀒찇ø䀒퀇ø耒퐇ø耒〈ø㼀 䀋ø䐋ø䠋ø爆䰋ø爆個ø理吋ø理堋ø尋øᲆ혀怋øᲆ豈搋øᲆ豈栋øᲆ혀氋ø怂`ø耀Ѡø脐ࡠøླྀ쀃ౠøĐၠøŀĀᑠøᨨЀᡠø퉘ᱠøɲ⁠ø큲ࠧ①ø⡠øܨⱠøࠀだø〉Ѐ㑠ø吐Ā㡠ø㱠ø眇䁠ø䑠ø晦昏䡠øÀ̀偠øŷ塠ø屠ø͐恠ø㸀摠øȀ桠ø䅁⠀池øဖ硠øᅡ䘀籠ø∢̀ꁠø€ꑠøȈ‐ꡠø珋逆걠ø︁끠ø￿<둠ø론ø昀 쑠ø̀쑠ø졠øøøࠀᑡøᡡøĀ@ᱡøĀ@⁡øĀ@②øĀ@ⱡøちø㑡ø㡡ø䁡ø㔀䑡ø㔀䡡ø㔀䱡ø㔀呡ø塡ø屡ø恡ø桡ø㔀污ø㔀灡ø㔀瑡ø㔀籡ø䀀聡ø䀀葡ø䀀衡ø䀀遡ø胀Ȁ鑡ø苼ĀѢøࡢø#ౢø#ၢø#ᑢø#ᡢø#ᱢø#⁢ø#③ø#ꡢø걢ø끢øᕑ둢øؑ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ༀêᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥ᓰ鿥䀀䀀䀀䀀䀀䀀䀀귞→ሀê࿡ἐâᨀ㇣ἀ쀓ጀ耓쀀胣ð⧡ဏᇮȊ샣ဏǮ砀鿥ဏ೮؀ëᨀë렃ëᔏ߮騏߮锏߮ỿ⿡↑ꃣᜏ࣮ᔏ߮픏߮騏߮锏߮ဏᇮȊ샣܀샣Ȁ胣ȋ胣Ċ胣ဏǮ๐ꃡဟხ℺ꃡ༰ϢཀǢ̢ꃡȠ蓡װꃡê借ᇮ̖臣̖臣借Ǯ濰翵ယđ臣ယ໰ꃡర駥၀ⷩꌴꃡ꠰觥䐠鿥06若࠶鋥\菣̰菣࠶若ⰰ鿥Ѐ鏥⠰鿥ीꃡꠠ駥鈣菠⌓ꃡ蝃ë됀蓥ꃣ뀀蓥ႀ뷨퍍成ꠀ駥ỿ⿡၀ⷩᬁë␃ëกëꃣႀ뷨ⷩ㸳ꃣയ෣ࠠ菥ꠣ鿥!菥С菥ࠡ菥鰣鿥!菥ȩ䋢С菥Ȫ䋢ࠡ菥蠣鿥အ菥㈪苢ᐡ菥ᤪ苢ᠡ菥琣鿥!菥ȩ䋢С菥Ȫ䋢ࠡ菥怣鿥‡菥尣鿥␡菥̣苢㔬苢⠡菥䰣鿥Ⱑ菥Đꃣ㠑菥 ꃣ㰡菥㠃鿥䀁菥㐃鿥䐁菥Ǫã䣡菥njꃣ䳁菥僡菥Ǩˣ員菥壁菥封菥怡菥̊ã搁菥ąã栁菥氡菥鿥瀡菥耡菥鿥逡菥ꀡ菥쐑菥఑鏥ܐǢ܀凣ﯿ:਩ꃣ!菥ȨꃣС菥Ḫꃣࠡ菥Ġꃣఢ菥ဢ菥儀ꃣᐂ菥ᄀꃣ᠂菥␢菥Ԡꃣ⠢菥̠ꃣ㐢菥 ꃣఢ菥ဢ菥ᐢ菥ᠢ菥␢菥⠢菥㐢菥าꃣ䨯ꃣ 菥†ꃣР菥᠐菥Ḡꃣ㐠菥ᜡã 菥 鏥̀ዣﳿ:㐂鿥ë〲鿥耀鏥ë⠂鿥ë㹃ꃣ 鿥ë々铥ëం鿥ëℰꃣ瀻蓥‰ꃣ瀻蓥̸ã瀻蓥琻铥ȊᏣﳿ*鿥脠ꃣ 菥吠鏥܀ዣﳿ*퐁鿥촀ëë0ꃣ鏥ģ菢а菢̈口若刺:뀁鿥@ꃣ숀ëꡡ鿥ꡱ鿥ŀ蓢؀ꃡ봀ëPꃣЀꃡ쐀ë܀ꃡ렀ë԰ꃡ 鏥а菢̈口ɐ藠﫿:瀁鿥뀀ëԀꃡ렀ë搡鿥Pꃣijꃣ鏥а菢Ȁ叡Ő藠﫿:䠁鿥ꐀëԀꃡ가ëᐁ鿥ꀀë̀哣:Ё鿥鰀ëdz迢ꃡꃡꃡᐱ鿥 ꃣ䀠菥鿥ࠡ鿥㐠菥 ⠠菥㸳ꃣἠꃣဩ菥ijꃣ鿥鏥㼓菢а菢Ȁ叡臥刺:㸳ꃣ ꃣ䀢菥〔菥ᰦ菥ఠꃣ됀鿥&菥蔀ëഀꃣ猀ë਀ꃣ焀ëฒꃣࠨãⰰ釥ȰϠࠀ口ﯿ:ฒꃣࠨãⰰ釥ȰϠࠀ口ﯿ:㌂ëꃣ뷨ႠĀᆀȀ삢ༀႀȀ̀‌䔄吁Ą က
......
if ARCH_ZYNQ if ARCH_ZYNQ
config ZYNQ_CUSTOM_INIT config TARGET_ELPHEL393
bool "Use custom ps7_init provided by Xilinx tool" bool "Elphel 10393 Zynq Board"
help default y
U-Boot includes ps7_init_gpl.[ch] for some Zynq board variants.
If you want to override them with customized ones
or ps7_init code for your board is missing, please say Y here
and add ones into board/xilinx/zynq/custom_hw_platform/ directory.
choice config SPL_LDSCRIPT
prompt "Xilinx Zynq board select" default "arch/arm/mach-zynq/u-boot-spl.lds"
default TARGET_ZYNQ_ZC702
config TARGET_ZYNQ_ZED config SPL_FAT_SUPPORT
bool "Zynq ZedBoard" default y
config TARGET_ZYNQ_MICROZED config SPL_LIBCOMMON_SUPPORT
bool "Zynq MicroZed" default y
config TARGET_ZYNQ_PICOZED config SPL_LIBDISK_SUPPORT
bool "Zynq PicoZed" default y
config TARGET_ZYNQ_ZC702 config SPL_LIBGENERIC_SUPPORT
bool "Zynq ZC702 Board" default y
config TARGET_ZYNQ_ZC706 config SPL_MMC_SUPPORT
bool "Zynq ZC706 Board" default y if MMC_SDHCI_ZYNQ
config TARGET_ZYNQ_ZC770 config SPL_SERIAL_SUPPORT
bool "Zynq ZC770 Board" default y
select ZYNQ_CUSTOM_INIT
config TARGET_ZYNQ_ZYBO config SPL_SPI_FLASH_SUPPORT
bool "Zynq Zybo Board" default y if ZYNQ_QSPI
config TARGET_ELPHEL393 config SPL_SPI_SUPPORT
bool "Zynq Elphel 10393 Board" default y if ZYNQ_QSPI
endchoice config ZYNQ_DDRC_INIT
bool "Zynq DDRC initialization"
default y
help
This option used to perform DDR specific initialization
if required. There might be cases like ddr less where we
want to skip ddr init and this option is useful for it.
config SYS_BOARD config SYS_BOARD
string "Board name"
default "elphel393" if TARGET_ELPHEL393 default "elphel393" if TARGET_ELPHEL393
default "zynq" default "zynq"
config SYS_VENDOR config SYS_VENDOR
string "Vendor name"
default "elphel" if TARGET_ELPHEL393 default "elphel" if TARGET_ELPHEL393
default "xilinx" default "xilinx"
...@@ -51,13 +53,28 @@ config SYS_SOC ...@@ -51,13 +53,28 @@ config SYS_SOC
default "zynq" default "zynq"
config SYS_CONFIG_NAME config SYS_CONFIG_NAME
default "zynq_zed" if TARGET_ZYNQ_ZED string "Board configuration name"
default "zynq_microzed" if TARGET_ZYNQ_MICROZED
default "zynq_picozed" if TARGET_ZYNQ_PICOZED
default "zynq_zc70x" if TARGET_ZYNQ_ZC702
default "zynq_zc706" if TARGET_ZYNQ_ZC706
default "zynq_zc770" if TARGET_ZYNQ_ZC770
default "zynq_zybo" if TARGET_ZYNQ_ZYBO
default "elphel393" if TARGET_ELPHEL393 default "elphel393" if TARGET_ELPHEL393
default "zynq-common"
help
This option contains information about board configuration name.
Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
will be used for board configuration.
config SYS_MALLOC_F_LEN
default 0x600
config SYS_MALLOC_LEN
default 0x1400000
config BOOT_INIT_FILE
string "boot.bin init register filename"
default ""
help
Add register writes to boot.bin format (max 256 pairs).
Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
config ZYNQ_SDHCI_MAX_FREQ
default 52000000
endif endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment