Skip to content

E
elphel-web-393
Commit 33c12313 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

added sensor port to be passed from tyhe default page

parent 26ea7fc2
Show whitespace changes
Inline Side-by-side
Showing with 22 additions and 19 deletions
src/php_top/parsedit.php
View file @ 33c12313
......@@ -157,16 +157,16 @@
$todo=preparePost();
}
$page_title="Default control/test page for the NC353L camera";
if (count($_GET)==0) {
if (array_key_exists ( 'sensor_port', $_GET )) {
$GLOBALS [sensor_port] = (myval($_GET ['sensor_port'])) & 3;
}
$page_title="Default control/test page for the NC393L camera, sensor port ".$GLOBALS [sensor_port];
if ((count($_GET)==0) || ((count($_GET)==1) && array_key_exists ( 'sensor_port', $_GET ))) {
startPage($page_title, "");
printDefaultPage();
endPage();
exit (0);
}
if (array_key_exists ( 'sensor_port', $_GET )) {
$GLOBALS [sensor_port] = (myval($_GET ['sensor_port'])) & 3;
}
$imgsrv = $imgsrv_base.$imgsrv_ports[$GLOBALS [sensor_port]];
$elp_const=get_defined_constants(true);
......@@ -238,8 +238,9 @@
*/
function printDefaultPage() {
$url_port = "sensor_port=".$GLOBALS [sensor_port]."&";
// $imgsrv="http://".$_SERVER['SERVER_ADDR'].":8081";
$url_init= "embed&test&showseq&title=Camera+initialization+parameters"
$url_init= $url_port."embed&test&showseq&title=Camera+initialization+parameters"
."&TASKLET_CTL=0*0" /// at least ELPHEL_CONST_TASKLET_CTL_NOSAME bit should be 0 so initialization will not wait for the frame sync
."&MAXAHEAD=2" /// When servicing interrupts, try programming up to 2 frames ahead of the due to program time)
."&FPGA_XTRA=1000" /// Extra clock cycles needed to compress a frame (in addition to per macroblocs time)
......@@ -258,7 +259,7 @@ function printDefaultPage() {
."&GTAB_B=0x0a390400" /// same for blue
."&SENSOR=0*0" /// setting sensor to zero will initiate sensor detection attempt (should be frame 0)
;
$url_debug= "test&showseq&title=Debug control"
$url_debug= $url_port."test&showseq&title=Debug control"
."&DEBUG=0x3fc"
."&TASKLET_CTL"
."&PROFILING_EN"
......@@ -270,12 +271,12 @@ function printDefaultPage() {
."&HIST_C_FRAME=@"
."&CIRCBUFWP=@"
;
$url_woi_control= "embed&test&showseq&title=Camera+WOI+Controls".
$url_woi_control= $url_port."embed&test&showseq&title=Camera+WOI+Controls".
"&SENSOR_RUN&COMPRESSOR_RUN&WOI_LEFT&WOI_TOP&WOI_WIDTH&WOI_HEIGHT&FLIPH&FLIPV&DCM_HOR&DCM_VERT&THIS_FRAME=@&CIRCBUFWP=@";
$url_woi_control_test="embed=.4&test=1&showseq=1&title=Camera+WOI+Controls+(test+mode)".
$url_woi_control_test=$url_port."embed=.4&test=1&showseq=1&title=Camera+WOI+Controls+(test+mode)".
"&SENSOR_RUN&COMPRESSOR_RUN&WOI_LEFT&WOI_TOP&WOI_WIDTH&WOI_HEIGHT&FLIPH=1*3&FLIPV=1*5&DCM_HOR&DCM_VERT&THIS_FRAME=@&CIRCBUFWP=@";
$url_images= "images=9:3:.2";
$url_aexp_all= "embed=0.1&title=Autoexposure/White+Balance/HDR+controls+(full)"
$url_images= $url_port."images=9:3:.2";
$url_aexp_all= $url_port."embed=0.1&title=Autoexposure/White+Balance/HDR+controls+(full)"
."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
."&AUTOEXP_ON=1" /// setting it to 0 will only disable autoexposure, but not HDR modes or white balancing
......@@ -322,7 +323,7 @@ $url_aexp_all= "embed=0.1&title=Autoexposure/White+Balance/HDR+controls+(full)"
."&HISTWND_TOP=@" /// Absolute (as written to FPGA) histogram window top (counted from the top of WOI)
;
$url_aexp_only= "embed=0.1&title=Autoexposure+controls"
$url_aexp_only= $url_port."embed=0.1&title=Autoexposure+controls"
."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
."&AUTOEXP_ON=1" /// setting it to 0 will only disable autoexposure, but not HDR modes or white balancing
......@@ -348,7 +349,7 @@ $url_aexp_only= "embed=0.1&title=Autoexposure+controls"
."&HISTWND_TOP=@" /// Absolute (as written to FPGA) histogram window top (counted from the top of WOI)
."&AE_INTEGERR=@" /// Current integrated error in the AE loop
;
$url_wb_only= "embed=0.1&title=White+Balance+controls"
$url_wb_only= $url_port."embed=0.1&title=White+Balance+controls"
."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
."&THIS_FRAME=@" /// Current frame
......@@ -385,7 +386,7 @@ $url_wb_only= "embed=0.1&title=White+Balance+controls"
."&WB_INTEGERR=@" /// current integrated error in the WB loop
;
$url_colors_only= "embed=0.1&title=Color+gains+controls"
$url_colors_only= $url_port."embed=0.1&title=Color+gains+controls"
/// Analog gains
."&GAINR=0x10000" /// R channel gain (mono gain) 8.8 0x100 - 1.0
."&GAING=0x10000" /// G channel gain (mono gain) 8.8 0x100 - 1.0
......@@ -397,7 +398,7 @@ $url_colors_only= "embed=0.1&title=Color+gains+controls"
."&SENSOR_REGS44=@" /// Sensor register gain B
;
$url_hdr_exp= "embed=0.1&title=HDR+exposure+controls"
$url_hdr_exp= $url_port."embed=0.1&title=HDR+exposure+controls"
."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
."&AUTOEXP_ON=1" /// setting it to 0 will only disable autoexposure, but not HDR modes or white balancing
......@@ -407,7 +408,7 @@ $url_hdr_exp= "embed=0.1&title=HDR+exposure+controls"
."&HDR_VEXPOS=0x40000" /// if less than 0x10000 - number of lines of exposure, >=10000 - relative to "normal" exposure
."&THIS_FRAME=@" /// Current frame
;
$url_ext_trigger="embed=0.1&title=External+trigger+controls"
$url_ext_trigger=$url_port."embed=0.1&title=External+trigger+controls"
."&TRIG=4*5" /// External trigger mode (should be set after dealys are set?)
/// bit 0 - "old" external mode (0- internal, 1 - external )
/// bit 1 - enable(1) or disable(0) external trigger to stop clip
......@@ -430,12 +431,13 @@ $url_ext_trigger="embed=0.1&title=External+trigger+controls"
/// 0x56555 - ext connector, 0x65555 - internal connector 0x66555 - both, 0x55555 - none
."&SENSOR_REGS30=@" /// Sensor register MODE1 (trigger bit)
;
$url_cable_delay="embed=0.3&title=Cable+delay+/+Sensor+phase+adjustment"
$url_cable_delay=$url_port."embed=0.3&title=Cable+delay+/+Sensor+phase+adjustment"
."&SENSOR_PHASE" /// Sensor phase - use | 0x80000 to reset DCM (needed if phase went too far)
."&DAEMON_EN=0" /// disable autoexposure/color balance
."&TESTSENSOR=0x10008" /// 0x10008 - color bars
;
$url_sample="embed=0.3&title=Sample+camera+control+page"
$url_sample= $url_port
."embed=0.3&title=Sample+camera+control+page"
."&SENSOR_REGS32=@"
."&SENSOR_REGS32__0106"
."&SENSOR_REGS160=@"
......@@ -443,7 +445,7 @@ $url_sample="embed=0.3&title=Sample+camera+control+page"
."&TESTSENSOR=0x10008"
."&FPGATEST"
;
$url_ext_photofinish="embed=0.2&&title=Photofinish+and+ oversize+controls"
$url_ext_photofinish=$url_port."embed=0.2&&title=Photofinish+and+ oversize+controls"
."&WOI_TOP" /// WOI top - here used to adjust the acquisition line to the center of the screen
."&WOI_HEIGHT" /// Total WOI height (composite image),<16384
."&WOI_WIDTH" /// Just WOI width (image height in photofinish mode)
......@@ -1100,6 +1102,7 @@ function parseGetNames() {
}
}
}
$page_title.=': port '.$GLOBALS [sensor_port];
return $immediateMode;
}
function readCurrentParameterValues() {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment