added sensor port to be passed from tyhe default page (33c12313) · Commits · Elphel / elphel-web-393

src/php_top/parsedit.php

+22 −19

Original line number	Diff line number	Diff line
		@@ -157,16 +157,16 @@
		$todo=preparePost();
		}

		$page_title="Default control/test page for the NC353L camera";
		if (count($_GET)==0) {
		if (array_key_exists ( 'sensor_port', $_GET )) {
		$GLOBALS [sensor_port] = (myval($_GET ['sensor_port'])) & 3;
		}
		$page_title="Default control/test page for the NC393L camera, sensor port ".$GLOBALS [sensor_port];
		if ((count($_GET)==0) \|\| ((count($_GET)==1) && array_key_exists ( 'sensor_port', $_GET ))) {
		startPage($page_title, "");
		printDefaultPage();
		endPage();
		exit (0);
		}
		if (array_key_exists ( 'sensor_port', $_GET )) {
		$GLOBALS [sensor_port] = (myval($_GET ['sensor_port'])) & 3;
		}

		$imgsrv = $imgsrv_base.$imgsrv_ports[$GLOBALS [sensor_port]];
		$elp_const=get_defined_constants(true);
		@@ -238,8 +238,9 @@
		*/

		function printDefaultPage() {
		$url_port = "sensor_port=".$GLOBALS [sensor_port]."&";
		// $imgsrv="http://".$_SERVER['SERVER_ADDR'].":8081";
		$url_init= "embed&test&showseq&title=Camera+initialization+parameters"
		$url_init= $url_port."embed&test&showseq&title=Camera+initialization+parameters"
		."&TASKLET_CTL=0*0" /// at least ELPHEL_CONST_TASKLET_CTL_NOSAME bit should be 0 so initialization will not wait for the frame sync
		."&MAXAHEAD=2" /// When servicing interrupts, try programming up to 2 frames ahead of the due to program time)
		."&FPGA_XTRA=1000" /// Extra clock cycles needed to compress a frame (in addition to per macroblocs time)
		@@ -258,7 +259,7 @@ function printDefaultPage() {
		."&GTAB_B=0x0a390400" /// same for blue
		."&SENSOR=0*0" /// setting sensor to zero will initiate sensor detection attempt (should be frame 0)
		;
		$url_debug= "test&showseq&title=Debug control"
		$url_debug= $url_port."test&showseq&title=Debug control"
		."&DEBUG=0x3fc"
		."&TASKLET_CTL"
		."&PROFILING_EN"
		@@ -270,12 +271,12 @@ function printDefaultPage() {
		."&HIST_C_FRAME=@"
		."&CIRCBUFWP=@"
		;
		$url_woi_control= "embed&test&showseq&title=Camera+WOI+Controls".
		$url_woi_control= $url_port."embed&test&showseq&title=Camera+WOI+Controls".
		"&SENSOR_RUN&COMPRESSOR_RUN&WOI_LEFT&WOI_TOP&WOI_WIDTH&WOI_HEIGHT&FLIPH&FLIPV&DCM_HOR&DCM_VERT&THIS_FRAME=@&CIRCBUFWP=@";
		$url_woi_control_test="embed=.4&test=1&showseq=1&title=Camera+WOI+Controls+(test+mode)".
		$url_woi_control_test=$url_port."embed=.4&test=1&showseq=1&title=Camera+WOI+Controls+(test+mode)".
		"&SENSOR_RUN&COMPRESSOR_RUN&WOI_LEFT&WOI_TOP&WOI_WIDTH&WOI_HEIGHT&FLIPH=13&FLIPV=15&DCM_HOR&DCM_VERT&THIS_FRAME=@&CIRCBUFWP=@";
		$url_images= "images=9:3:.2";
		$url_aexp_all= "embed=0.1&title=Autoexposure/White+Balance/HDR+controls+(full)"
		$url_images= $url_port."images=9:3:.2";
		$url_aexp_all= $url_port."embed=0.1&title=Autoexposure/White+Balance/HDR+controls+(full)"
		."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
		."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
		."&AUTOEXP_ON=1" /// setting it to 0 will only disable autoexposure, but not HDR modes or white balancing
		@@ -322,7 +323,7 @@ $url_aexp_all= "embed=0.1&title=Autoexposure/White+Balance/HDR+controls+(full)"
		."&HISTWND_TOP=@" /// Absolute (as written to FPGA) histogram window top (counted from the top of WOI)
		;

		$url_aexp_only= "embed=0.1&title=Autoexposure+controls"
		$url_aexp_only= $url_port."embed=0.1&title=Autoexposure+controls"
		."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
		."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
		."&AUTOEXP_ON=1" /// setting it to 0 will only disable autoexposure, but not HDR modes or white balancing
		@@ -348,7 +349,7 @@ $url_aexp_only= "embed=0.1&title=Autoexposure+controls"
		."&HISTWND_TOP=@" /// Absolute (as written to FPGA) histogram window top (counted from the top of WOI)
		."&AE_INTEGERR=@" /// Current integrated error in the AE loop
		;
		$url_wb_only= "embed=0.1&title=White+Balance+controls"
		$url_wb_only= $url_port."embed=0.1&title=White+Balance+controls"
		."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
		."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
		."&THIS_FRAME=@" /// Current frame
		@@ -385,7 +386,7 @@ $url_wb_only= "embed=0.1&title=White+Balance+controls"
		."&WB_INTEGERR=@" /// current integrated error in the WB loop
		;

		$url_colors_only= "embed=0.1&title=Color+gains+controls"
		$url_colors_only= $url_port."embed=0.1&title=Color+gains+controls"
		/// Analog gains
		."&GAINR=0x10000" /// R channel gain (mono gain) 8.8 0x100 - 1.0
		."&GAING=0x10000" /// G channel gain (mono gain) 8.8 0x100 - 1.0
		@@ -397,7 +398,7 @@ $url_colors_only= "embed=0.1&title=Color+gains+controls"
		."&SENSOR_REGS44=@" /// Sensor register gain B
		;

		$url_hdr_exp= "embed=0.1&title=HDR+exposure+controls"
		$url_hdr_exp= $url_port."embed=0.1&title=HDR+exposure+controls"
		."&COMPRESSOR_RUN=".ELPHEL_CONST_COMPRESSOR_RUN_CONT /// run compressor in continuous mode
		."&DAEMON_EN=1" /// Daemons are controlled by bits in this register. Autoexposure bit is 0 (1<<0 == 1)
		."&AUTOEXP_ON=1" /// setting it to 0 will only disable autoexposure, but not HDR modes or white balancing
		@@ -407,7 +408,7 @@ $url_hdr_exp= "embed=0.1&title=HDR+exposure+controls"
		."&HDR_VEXPOS=0x40000" /// if less than 0x10000 - number of lines of exposure, >=10000 - relative to "normal" exposure
		."&THIS_FRAME=@" /// Current frame
		;
		$url_ext_trigger="embed=0.1&title=External+trigger+controls"
		$url_ext_trigger=$url_port."embed=0.1&title=External+trigger+controls"
		."&TRIG=4*5" /// External trigger mode (should be set after dealys are set?)
		/// bit 0 - "old" external mode (0- internal, 1 - external )
		/// bit 1 - enable(1) or disable(0) external trigger to stop clip
		@@ -430,12 +431,13 @@ $url_ext_trigger="embed=0.1&title=External+trigger+controls"
		/// 0x56555 - ext connector, 0x65555 - internal connector 0x66555 - both, 0x55555 - none
		."&SENSOR_REGS30=@" /// Sensor register MODE1 (trigger bit)
		;
		$url_cable_delay="embed=0.3&title=Cable+delay+/+Sensor+phase+adjustment"
		$url_cable_delay=$url_port."embed=0.3&title=Cable+delay+/+Sensor+phase+adjustment"
		."&SENSOR_PHASE" /// Sensor phase - use \| 0x80000 to reset DCM (needed if phase went too far)
		."&DAEMON_EN=0" /// disable autoexposure/color balance
		."&TESTSENSOR=0x10008" /// 0x10008 - color bars
		;
		$url_sample="embed=0.3&title=Sample+camera+control+page"
		$url_sample= $url_port
		."embed=0.3&title=Sample+camera+control+page"
		."&SENSOR_REGS32=@"
		."&SENSOR_REGS32__0106"
		."&SENSOR_REGS160=@"
		@@ -443,7 +445,7 @@ $url_sample="embed=0.3&title=Sample+camera+control+page"
		."&TESTSENSOR=0x10008"
		."&FPGATEST"
		;
		$url_ext_photofinish="embed=0.2&&title=Photofinish+and+ oversize+controls"
		$url_ext_photofinish=$url_port."embed=0.2&&title=Photofinish+and+ oversize+controls"
		."&WOI_TOP" /// WOI top - here used to adjust the acquisition line to the center of the screen
		."&WOI_HEIGHT" /// Total WOI height (composite image),<16384
		."&WOI_WIDTH" /// Just WOI width (image height in photofinish mode)
		@@ -1100,6 +1102,7 @@ function parseGetNames() {
		}
		}
		}
		$page_title.=': port '.$GLOBALS [sensor_port];
		return $immediateMode;
		}
		function readCurrentParameterValues() {

Admin message