Move init script to /etc/elphel393

src/Makefile

 SYSCONFDIR=$(DESTDIR)/etc
 INITDIR=$(DESTDIR)/etc/init.d
+MODPROBEDIR=$(SYSCONFDIR)/modprobe.d
+DRIVER_NAME=ahci_elphel
+CONFDIR=$(SYSCONFDIR)/elphel393
 
 OWN = -o root -g root
 
@@ -17,8 +20,8 @@ install:
 	# below depends on Yocto and the corresponding recipe (meta-core/init/init.bb)
 
 	sed -e 's/192.168.0.9/$(REMOTE_IP)/' $(SCRIPT1) > $(SCRIPT1).tmp
-	$(INSTALL) $(OWN) -d $(SYSCONFDIR)
-	$(INSTALL) $(OWN) -m $(INSTMODE) $(SCRIPT1).tmp $(SYSCONFDIR)/$(SCRIPT1)
+	$(INSTALL) $(OWN) -d $(CONFDIR)
+	$(INSTALL) $(OWN) -m $(INSTMODE) $(SCRIPT1).tmp $(CONFDIR)/$(SCRIPT1)
 	rm $(SCRIPT1).tmp
 
 	#INITSTRING default is defined in local.conf, weak default - meta-core/init/init.bb
@@ -26,6 +29,10 @@ install:
 	$(INSTALL) $(OWN) -d $(INITDIR)
 	$(INSTALL) $(OWN) -m $(INSTMODE) $(SCRIPT2).tmp $(INITDIR)/$(SCRIPT2)
 	rm $(SCRIPT2).tmp
+	
+	# blacklist AHCI driver to prevent it from loading before FPGA is configured
+	$(INSTALL) $(OWN) -d $(MODPROBEDIR)
+	echo "blacklist $(DRIVER_NAME)" >> $(MODPROBEDIR)/blacklist.conf
 
 clean:
 	@echo "make clean in src"

src/init_elphel393

@@ -8,6 +8,7 @@ DESC="extra init scripts"
 MNTPOINT=/mnt/mmc
 MMCDEV=/dev/mmcblk0p1
 SOME_SCRIPT=init_elphel393.sh
+CONFDIR=/etc/elphel393
 
 case "$1" in
   start)
@@ -23,7 +24,7 @@ case "$1" in
 	fi
 	mount $MMCDEV $MNTPOINT
 	
-	/etc/$SOME_SCRIPT
+	$CONFDIR/$SOME_SCRIPT
 	;;
   stop)
 	echo -n "Stopping $DESC: "

src/init_elphel393.sh

@@ -40,6 +40,13 @@ echo "start white balance daemon"
 
 wget -O - "localhost/parsedit.php?immediate&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
 
+if [ $SATA_EN -eq 1 ]; then
+    $PYDIR/x393sata.py
+    modprobe ahci_elphel &
+    sleep 2
+    echo 1 > /sys/devices/soc0/amba@0/80000000.elphel-ahci/load_module
+fi
+
 echo "/etc/init_elphel393.sh done"
 exit 0
 
@@ -153,11 +160,4 @@ if [ -f /usr/bin/camogm ]; then
 	camogm -n $CAMOGM_PIPE -p $CAMOGM_PORT &
 fi
 
-if [ $SATA_EN -eq 1 ]; then
-    $PYDIR/x393sata.py
-    modprobe ahci_elphel &
-    sleep 2
-    echo 1 > /sys/devices/soc0/amba@0/80000000.elphel-ahci/load_module
-fi
-
 sync