restored init_elphel393.sh for temporary use with Eyesis

src/Makefile

@@ -15,6 +15,7 @@ INSTMODE   = 0755
 
 SCRIPT1=init_elphel393.py
 SCRIPT2=init_elphel393
+SCRIPT3=init_elphel393.sh
 
 all:
 	@echo "make all in src"
@@ -28,6 +29,12 @@ install:
 	$(INSTALL) $(OWN) -m $(INSTMODE) $(SCRIPT1).tmp $(CONFDIR)/$(SCRIPT1)
 	rm $(SCRIPT1).tmp
 
+	sed -e 's/192.168.0.9/$(REMOTE_IP)/' $(SCRIPT3) > $(SCRIPT3).tmp
+	$(INSTALL) $(OWN) -d $(CONFDIR)
+	$(INSTALL) $(OWN) -m $(INSTMODE) $(SCRIPT3).tmp $(CONFDIR)/$(SCRIPT3)
+	rm $(SCRIPT3).tmp
+	
+	
 	#INITSTRING default is defined in local.conf, weak default - meta-core/init/init.bb
 	sed -e 's/init_elphel393.py/$(INITSTRING)/' $(SCRIPT2) > $(SCRIPT2).tmp
 	$(INSTALL) $(OWN) -d $(INITDIR)

src/init_elphel393.sh

 #/bin/sh
-#ifconfig eth0 down
-#ifconfig eth0 hw ether 00:0e:64:10:00:02 192.168.0.7
+#Do it early (add DT configuration), it takes ~1 sec to drop voltage to < 1.0V
+echo "0x101" > /sys/devices/soc0/elphel393-pwr@0/gpio_10389 # power on (it is actually already on)
+echo "0x100" > /sys/devices/soc0/elphel393-pwr@0/gpio_10389 # power off
+sleep 1
 
 # select sensor type: 5 Mpx (set 5) or 14 Mpx (set 14)
 # 14MPix does not work with framepars & parsedit!!!
@@ -19,39 +21,56 @@ ifconfig eth0 192.168.0.9
 
 PYDIR=/usr/local/bin
 VERILOG_DIR=/usr/local/verilog
-$PYDIR/test_mcntrl.py @${VERILOG_DIR}/hargs
+
+#echo "exiting before power on"
+#exit 0;
+
+$PYDIR/test_mcntrl.py @${VERILOG_DIR}/hargs-eyesis
+#$PYDIR/test_mcntrl.py @${VERILOG_DIR}/hargs
+
 echo imgsrv -p 2323
 imgsrv -p 2323
 #restart PHP - it can get errors while opening/mmaping at startup, then some functions fail
 killall lighttpd; /usr/sbin/lighttpd -f /etc/lighttpd.conf
 /www/pages/exif.php init=/etc/Exif_template.xml
+#echo "TURN 10359 power in the next 10 seconds"
+#sleep 10
+#exit 0
 
-echo "init sensor port"
+cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag0
+cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag1
+cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag2
+cat /usr/local/verilog/x359.bit > /dev/sfpgaconfjtag3
+#exit 0
 
-wget -O /dev/null "localhost/framepars.php?sensor_port=0&cmd=init"
-wget -O /dev/null "localhost/framepars.php?sensor_port=1&cmd=init"
-wget -O /dev/null "localhost/framepars.php?sensor_port=2&cmd=init"
-wget -O /dev/null "localhost/framepars.php?sensor_port=3&cmd=init"
 
-echo "start autoexposure daemons on each sensor port"
-autoexposure -p 0 -c 0 -b 0 -d 1 &
-autoexposure -p 1 -c 0 -b 0 -d 1 &
+#wget -O /dev/null "localhost/framepars.php?sensor_port=3&cmd=min_init"
+#wget -O /dev/null "localhost/framepars.php?sensor_port=2&cmd=min_init"
+wget -O - "localhost/framepars.php?sensor_port=3&cmd=min_init"
+wget -O - "localhost/framepars.php?sensor_port=2&cmd=min_init"
+wget -O - "localhost/framepars.php?sensor_port=1&cmd=min_init"
+wget -O - "localhost/framepars.php?sensor_port=0&cmd=min_init"
+
+sleep 2
+cat /proc/interrupts
+#sleep 1
+#cat /proc/interrupts
+
 autoexposure -p 2 -c 0 -b 0 -d 1 &
 autoexposure -p 3 -c 0 -b 0 -d 1 &
+autoexposure -p 1 -c 0 -b 0 -d 1 &
+autoexposure -p 0 -c 0 -b 0 -d 1 &
 
-echo "Set autoexposure parameters and enable autoesposure for each sensor port, delay startup of daemon until enough frames are acquired"
-
-wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=0&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
-wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=1&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
 wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=2&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
 wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=3&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
+wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=1&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
+wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=0&COMPRESSOR_RUN=2&DAEMON_EN=1*12&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3"
 
-echo "set up white balance parameters"
-
-wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=0&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
-wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=1&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
 wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=2&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
 wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=3&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
+wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=1&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
+wget -O /dev/null "localhost/parsedit.php?immediate&sensor_port=0&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000"
+
 
 if [ $SATA_EN -eq 1 ]; then
     $PYDIR/x393sata.py
@@ -59,6 +78,7 @@ if [ $SATA_EN -eq 1 ]; then
     sleep 2
     echo 1 > /sys/devices/soc0/amba@0/80000000.elphel-ahci/load_module
 fi
-
+echo "starting temperature monitor with fan control disabled"
+tempmon.py --control_fan off &
 echo "/etc/init_elphel393.sh done"
 exit 0