Update doxygen documentation

5aea3da4 · Mikhail Karpenko · d28b8a87 · 5aea3da4 · 5aea3da4 · 5aea3da4
Commit 5aea3da4 authored Jun 23, 2016 by Mikhail Karpenko
Hide whitespace changes
Inline Side-by-side

Showing with 297 additions and 321 deletions

Doxyfile Doxyfile +255 -255

camogm.h camogm.h +1 -1

camogm_jpeg.c camogm_jpeg.c +17 -53

camogm_jpeg.h camogm_jpeg.h +17 -0

camogm_read.c camogm_read.c +7 -12

No files found.
--- a/Doxyfile
+++ b/Doxyfile
@@ -24,7 +24,7 @@
 # for the list of possible encodings.
 # The default value is: UTF-8.

-DOXYFILE_ENCODING      = UTF-8
+DOXYFILE_ENCODING = UTF-8

 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
 # double-quotes, unless you are using Doxywizard) that should identify the
@@ -32,33 +32,33 @@ DOXYFILE_ENCODING      = UTF-8
 # title of most generated pages and in a few other places.
 # The default value is: My Project.

-PROJECT_NAME           = "camogm"
+PROJECT_NAME = "camogm"

 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
 # could be handy for archiving the generated documentation or if some version
 # control system is used.

-PROJECT_NUMBER         =
+PROJECT_NUMBER = 

 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
 # quick idea about the purpose of the project. Keep the description short.

-PROJECT_BRIEF          =
+PROJECT_BRIEF = 

 # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
 # in the documentation. The maximum height of the logo should not exceed 55
 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
 # the logo to the output directory.

-PROJECT_LOGO           =
+PROJECT_LOGO = 

 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
 # into which the generated documentation will be written. If a relative path is
 # entered, it will be relative to the location where doxygen was started. If
 # left blank the current directory will be used.

-OUTPUT_DIRECTORY       =
+OUTPUT_DIRECTORY = 

 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
 # directories (in 2 levels) under the output directory of each output format and
@@ -68,7 +68,7 @@ OUTPUT_DIRECTORY       =
 # performance problems for the file system.
 # The default value is: NO.

-CREATE_SUBDIRS         = NO
+CREATE_SUBDIRS = NO

 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
 # characters to appear in the names of generated files. If set to NO, non-ASCII
@@ -76,7 +76,7 @@ CREATE_SUBDIRS         = NO
 # U+3044.
 # The default value is: NO.

-ALLOW_UNICODE_NAMES    = NO
+ALLOW_UNICODE_NAMES = NO

 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
 # documentation generated by doxygen is written. Doxygen will use this
@@ -91,14 +91,14 @@ ALLOW_UNICODE_NAMES    = NO
 # Ukrainian and Vietnamese.
 # The default value is: English.

-OUTPUT_LANGUAGE        = English
+OUTPUT_LANGUAGE = English

 # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
 # descriptions after the members that are listed in the file and class
 # documentation (similar to Javadoc). Set to NO to disable this.
 # The default value is: YES.

-BRIEF_MEMBER_DESC      = YES
+BRIEF_MEMBER_DESC = YES

 # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
 # description of a member or function before the detailed description
@@ -107,7 +107,7 @@ BRIEF_MEMBER_DESC      = YES
 # brief descriptions will be completely suppressed.
 # The default value is: YES.

-REPEAT_BRIEF           = YES
+REPEAT_BRIEF = YES

 # This tag implements a quasi-intelligent brief description abbreviator that is
 # used to form the text in various listings. Each string in this list, if found
@@ -118,14 +118,14 @@ REPEAT_BRIEF           = YES
 # the entity):The $name class, The $name widget, The $name file, is, provides,
 # specifies, contains, represents, a, an and the.

-ABBREVIATE_BRIEF       =
+ABBREVIATE_BRIEF = 

 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
 # doxygen will generate a detailed section even if there is only a brief
 # description.
 # The default value is: NO.

-ALWAYS_DETAILED_SEC    = NO
+ALWAYS_DETAILED_SEC = NO

 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
 # inherited members of a class in the documentation of that class as if those
@@ -133,14 +133,14 @@ ALWAYS_DETAILED_SEC    = NO
 # operators of the base classes will not be shown.
 # The default value is: NO.

-INLINE_INHERITED_MEMB  = NO
+INLINE_INHERITED_MEMB = NO

 # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
 # before files name in the file list and in the header files. If set to NO the
 # shortest path that makes the file name unique will be used
 # The default value is: YES.

-FULL_PATH_NAMES        = YES
+FULL_PATH_NAMES = YES

 # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
 # Stripping is only done if one of the specified strings matches the left-hand
@@ -152,7 +152,7 @@ FULL_PATH_NAMES        = YES
 # will be relative from the directory where doxygen is started.
 # This tag requires that the tag FULL_PATH_NAMES is set to YES.

-STRIP_FROM_PATH        =
+STRIP_FROM_PATH = 

 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
 # path mentioned in the documentation of a class, which tells the reader which
@@ -161,14 +161,14 @@ STRIP_FROM_PATH        =
 # specify the list of include paths that are normally passed to the compiler
 # using the -I flag.

-STRIP_FROM_INC_PATH    =
+STRIP_FROM_INC_PATH = 

 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
 # less readable) file names. This can be useful is your file systems doesn't
 # support long names like on DOS, Mac, or CD-ROM.
 # The default value is: NO.

-SHORT_NAMES            = NO
+SHORT_NAMES = NO

 # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
 # first line (until the first dot) of a Javadoc-style comment as the brief
@@ -177,7 +177,7 @@ SHORT_NAMES            = NO
 # description.)
 # The default value is: NO.

-JAVADOC_AUTOBRIEF      = NO
+JAVADOC_AUTOBRIEF = NO

 # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
 # line (until the first dot) of a Qt-style comment as the brief description. If
@@ -185,7 +185,7 @@ JAVADOC_AUTOBRIEF      = NO
 # requiring an explicit \brief command for a brief description.)
 # The default value is: NO.

-QT_AUTOBRIEF           = NO
+QT_AUTOBRIEF = NO

 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
 # multi-line C++ special comment block (i.e. a block of //! or /// comments) as
@@ -203,20 +203,20 @@ MULTILINE_CPP_IS_BRIEF = NO
 # documentation from any documented member that it re-implements.
 # The default value is: YES.

-INHERIT_DOCS           = YES
+INHERIT_DOCS = YES

 # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
 # page for each member. If set to NO, the documentation of a member will be part
 # of the file/class/namespace that contains it.
 # The default value is: NO.

-SEPARATE_MEMBER_PAGES  = NO
+SEPARATE_MEMBER_PAGES = NO

 # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
 # uses this value to replace tabs by spaces in code fragments.
 # Minimum value: 1, maximum value: 16, default value: 4.

-TAB_SIZE               = 4
+TAB_SIZE = 4

 # This tag can be used to specify a number of aliases that act as commands in
 # the documentation. An alias has the form:
@@ -228,13 +228,13 @@ TAB_SIZE               = 4
 # "Side Effects:". You can put \n's in the value part of an alias to insert
 # newlines.

-ALIASES                =
+ALIASES = 

 # This tag can be used to specify a number of word-keyword mappings (TCL only).
 # A mapping has the form "name=value". For example adding "class=itcl::class"
 # will allow you to use the command class in the itcl::class meaning.

-TCL_SUBST              =
+TCL_SUBST = 

 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
 # only. Doxygen will then generate output that is more tailored for C. For
@@ -242,7 +242,7 @@ TCL_SUBST              =
 # members will be omitted, etc.
 # The default value is: NO.

-OPTIMIZE_OUTPUT_FOR_C  = YES
+OPTIMIZE_OUTPUT_FOR_C = YES

 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
 # Python sources only. Doxygen will then generate output that is more tailored
@@ -250,19 +250,19 @@ OPTIMIZE_OUTPUT_FOR_C  = YES
 # qualified scopes will look different, etc.
 # The default value is: NO.

-OPTIMIZE_OUTPUT_JAVA   = NO
+OPTIMIZE_OUTPUT_JAVA = NO

 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
 # sources. Doxygen will then generate output that is tailored for Fortran.
 # The default value is: NO.

-OPTIMIZE_FOR_FORTRAN   = NO
+OPTIMIZE_FOR_FORTRAN = NO

 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
 # sources. Doxygen will then generate output that is tailored for VHDL.
 # The default value is: NO.

-OPTIMIZE_OUTPUT_VHDL   = NO
+OPTIMIZE_OUTPUT_VHDL = NO

 # Doxygen selects the parser to use depending on the extension of the files it
 # parses. With this tag you can assign which parser to use for a given
@@ -281,7 +281,7 @@ OPTIMIZE_OUTPUT_VHDL   = NO
 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
 # the files are not read by doxygen.

-EXTENSION_MAPPING      =
+EXTENSION_MAPPING = 

 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
 # according to the Markdown format, which allows for more readable
@@ -291,7 +291,7 @@ EXTENSION_MAPPING      =
 # case of backward compatibilities issues.
 # The default value is: YES.

-MARKDOWN_SUPPORT       = YES
+MARKDOWN_SUPPORT = YES

 # When enabled doxygen tries to link words that correspond to documented
 # classes, or namespaces to their corresponding documentation. Such a link can
@@ -299,7 +299,7 @@ MARKDOWN_SUPPORT       = YES
 # globally by setting AUTOLINK_SUPPORT to NO.
 # The default value is: YES.

-AUTOLINK_SUPPORT       = YES
+AUTOLINK_SUPPORT = YES

 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
 # to include (a tag file for) the STL sources as input, then you should set this
@@ -309,13 +309,13 @@ AUTOLINK_SUPPORT       = YES
 # diagrams that involve STL classes more complete and accurate.
 # The default value is: NO.

-BUILTIN_STL_SUPPORT    = NO
+BUILTIN_STL_SUPPORT = NO

 # If you use Microsoft's C++/CLI language, you should set this option to YES to
 # enable parsing support.
 # The default value is: NO.

-CPP_CLI_SUPPORT        = NO
+CPP_CLI_SUPPORT = NO

 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
 # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
@@ -323,7 +323,7 @@ CPP_CLI_SUPPORT        = NO
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.

-SIP_SUPPORT            = NO
+SIP_SUPPORT = NO

 # For Microsoft's IDL there are propget and propput attributes to indicate
 # getter and setter methods for a property. Setting this option to YES will make
@@ -333,7 +333,7 @@ SIP_SUPPORT            = NO
 # should set this option to NO.
 # The default value is: YES.

-IDL_PROPERTY_SUPPORT   = YES
+IDL_PROPERTY_SUPPORT = YES

 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
 # tag is set to YES then doxygen will reuse the documentation of the first
@@ -341,7 +341,7 @@ IDL_PROPERTY_SUPPORT   = YES
 # all members of a group must be documented explicitly.
 # The default value is: NO.

-DISTRIBUTE_GROUP_DOC   = NO
+DISTRIBUTE_GROUP_DOC = NO

 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
 # (for instance a group of public functions) to be put as a subgroup of that
@@ -350,7 +350,7 @@ DISTRIBUTE_GROUP_DOC   = NO
 # \nosubgrouping command.
 # The default value is: YES.

-SUBGROUPING            = YES
+SUBGROUPING = YES

 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
 # are shown inside the group in which they are included (e.g. using \ingroup)
@@ -371,7 +371,7 @@ INLINE_GROUPED_CLASSES = NO
 # Man pages) or section (for LaTeX and RTF).
 # The default value is: NO.

-INLINE_SIMPLE_STRUCTS  = NO
+INLINE_SIMPLE_STRUCTS = NO

 # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
 # enum is documented as struct, union, or enum with the name of the typedef. So
@@ -382,7 +382,7 @@ INLINE_SIMPLE_STRUCTS  = NO
 # types are typedef'ed and only the typedef is referenced, never the tag name.
 # The default value is: NO.

-TYPEDEF_HIDES_STRUCT   = NO
+TYPEDEF_HIDES_STRUCT = NO

 # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
 # cache is used to resolve symbols given their name and scope. Since this can be
@@ -395,7 +395,7 @@ TYPEDEF_HIDES_STRUCT   = NO
 # the optimal cache size from a speed point of view.
 # Minimum value: 0, maximum value: 9, default value: 0.

-LOOKUP_CACHE_SIZE      = 0
+LOOKUP_CACHE_SIZE = 0

 #---------------------------------------------------------------------------
 # Build related configuration options
@@ -409,25 +409,25 @@ LOOKUP_CACHE_SIZE      = 0
 # normally produced when WARNINGS is set to YES.
 # The default value is: NO.

-EXTRACT_ALL            = NO
+EXTRACT_ALL = NO

 # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
 # be included in the documentation.
 # The default value is: NO.

-EXTRACT_PRIVATE        = NO
+EXTRACT_PRIVATE = NO

 # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
 # scope will be included in the documentation.
 # The default value is: NO.

-EXTRACT_PACKAGE        = NO
+EXTRACT_PACKAGE = NO

 # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
 # included in the documentation.
 # The default value is: NO.

-EXTRACT_STATIC         = NO
+EXTRACT_STATIC = YES

 # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
 # locally in source files will be included in the documentation. If set to NO,
@@ -435,7 +435,7 @@ EXTRACT_STATIC         = NO
 # for Java sources.
 # The default value is: YES.

-EXTRACT_LOCAL_CLASSES  = YES
+EXTRACT_LOCAL_CLASSES = YES

 # This flag is only useful for Objective-C code. If set to YES, local methods,
 # which are defined in the implementation section but not in the interface are
@@ -443,7 +443,7 @@ EXTRACT_LOCAL_CLASSES  = YES
 # included.
 # The default value is: NO.

-EXTRACT_LOCAL_METHODS  = NO
+EXTRACT_LOCAL_METHODS = NO

 # If this flag is set to YES, the members of anonymous namespaces will be
 # extracted and appear in the documentation as a namespace called
@@ -452,7 +452,7 @@ EXTRACT_LOCAL_METHODS  = NO
 # are hidden.
 # The default value is: NO.

-EXTRACT_ANON_NSPACES   = NO
+EXTRACT_ANON_NSPACES = NO

 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
 # undocumented members inside documented classes or files. If set to NO these
@@ -460,7 +460,7 @@ EXTRACT_ANON_NSPACES   = NO
 # section is generated. This option has no effect if EXTRACT_ALL is enabled.
 # The default value is: NO.

-HIDE_UNDOC_MEMBERS     = NO
+HIDE_UNDOC_MEMBERS = NO

 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
 # undocumented classes that are normally visible in the class hierarchy. If set
@@ -468,28 +468,28 @@ HIDE_UNDOC_MEMBERS     = NO
 # has no effect if EXTRACT_ALL is enabled.
 # The default value is: NO.

-HIDE_UNDOC_CLASSES     = NO
+HIDE_UNDOC_CLASSES = NO

 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
 # (class|struct|union) declarations. If set to NO, these declarations will be
 # included in the documentation.
 # The default value is: NO.

-HIDE_FRIEND_COMPOUNDS  = NO
+HIDE_FRIEND_COMPOUNDS = NO

 # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
 # documentation blocks found inside the body of a function. If set to NO, these
 # blocks will be appended to the function's detailed documentation block.
 # The default value is: NO.

-HIDE_IN_BODY_DOCS      = NO
+HIDE_IN_BODY_DOCS = NO

 # The INTERNAL_DOCS tag determines if documentation that is typed after a
 # \internal command is included. If the tag is set to NO then the documentation
 # will be excluded. Set it to YES to include the internal documentation.
 # The default value is: NO.

-INTERNAL_DOCS          = NO
+INTERNAL_DOCS = NO

 # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
 # names in lower-case letters. If set to YES, upper-case letters are also
@@ -498,53 +498,53 @@ INTERNAL_DOCS          = NO
 # and Mac users are advised to set this option to NO.
 # The default value is: system dependent.

-CASE_SENSE_NAMES       = YES
+CASE_SENSE_NAMES = YES

 # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
 # their full class and namespace scopes in the documentation. If set to YES, the
 # scope will be hidden.
 # The default value is: NO.

-HIDE_SCOPE_NAMES       = NO
+HIDE_SCOPE_NAMES = NO

 # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
 # append additional text to a page's title, such as Class Reference. If set to
 # YES the compound reference will be hidden.
 # The default value is: NO.

-HIDE_COMPOUND_REFERENCE= NO
+HIDE_COMPOUND_REFERENCE = NO

 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
 # the files that are included by a file in the documentation of that file.
 # The default value is: YES.

-SHOW_INCLUDE_FILES     = YES
+SHOW_INCLUDE_FILES = YES

 # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
 # grouped member an include statement to the documentation, telling the reader
 # which file to include in order to use the member.
 # The default value is: NO.

-SHOW_GROUPED_MEMB_INC  = NO
+SHOW_GROUPED_MEMB_INC = NO

 # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
 # files with double quotes in the documentation rather than with sharp brackets.
 # The default value is: NO.

-FORCE_LOCAL_INCLUDES   = NO
+FORCE_LOCAL_INCLUDES = NO

 # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
 # documentation for inline members.
 # The default value is: YES.

-INLINE_INFO            = YES
+INLINE_INFO = YES

 # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
 # (detailed) documentation of file and class members alphabetically by member
 # name. If set to NO, the members will appear in declaration order.
 # The default value is: YES.

-SORT_MEMBER_DOCS       = YES
+SORT_MEMBER_DOCS = YES

 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
 # descriptions of file, namespace and class members alphabetically by member
@@ -552,7 +552,7 @@ SORT_MEMBER_DOCS       = YES
 # this will also influence the order of the classes in the class list.
 # The default value is: NO.

-SORT_BRIEF_DOCS        = NO
+SORT_BRIEF_DOCS = NO

 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
 # (brief and detailed) documentation of class members so that constructors and
@@ -571,7 +571,7 @@ SORT_MEMBERS_CTORS_1ST = NO
 # appear in their defined order.
 # The default value is: NO.

-SORT_GROUP_NAMES       = NO
+SORT_GROUP_NAMES = NO

 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
 # fully-qualified names, including namespaces. If set to NO, the class list will
@@ -581,7 +581,7 @@ SORT_GROUP_NAMES       = NO
 # list.
 # The default value is: NO.

-SORT_BY_SCOPE_NAME     = NO
+SORT_BY_SCOPE_NAME = NO

 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
 # type resolution of all parameters of a function it will reject a match between
@@ -591,38 +591,38 @@ SORT_BY_SCOPE_NAME     = NO
 # accept a match between prototype and implementation in such cases.
 # The default value is: NO.

-STRICT_PROTO_MATCHING  = NO
+STRICT_PROTO_MATCHING = NO

 # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
 # list. This list is created by putting \todo commands in the documentation.
 # The default value is: YES.

-GENERATE_TODOLIST      = YES
+GENERATE_TODOLIST = YES

 # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
 # list. This list is created by putting \test commands in the documentation.
 # The default value is: YES.

-GENERATE_TESTLIST      = YES
+GENERATE_TESTLIST = YES

 # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
 # list. This list is created by putting \bug commands in the documentation.
 # The default value is: YES.

-GENERATE_BUGLIST       = YES
+GENERATE_BUGLIST = YES

 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
 # the deprecated list. This list is created by putting \deprecated commands in
 # the documentation.
 # The default value is: YES.

-GENERATE_DEPRECATEDLIST= YES
+GENERATE_DEPRECATEDLIST = YES

 # The ENABLED_SECTIONS tag can be used to enable conditional documentation
 # sections, marked by \if <section_label> ... \endif and \cond <section_label>
 # ... \endcond blocks.

-ENABLED_SECTIONS       =
+ENABLED_SECTIONS = 

 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
 # initial value of a variable or macro / define can have for it to appear in the
@@ -633,28 +633,28 @@ ENABLED_SECTIONS       =
 # documentation regardless of this setting.
 # Minimum value: 0, maximum value: 10000, default value: 30.

-MAX_INITIALIZER_LINES  = 30
+MAX_INITIALIZER_LINES = 30

 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
 # the bottom of the documentation of classes and structs. If set to YES, the
 # list will mention the files that were used to generate the documentation.
 # The default value is: YES.

-SHOW_USED_FILES        = YES
+SHOW_USED_FILES = YES

 # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
 # will remove the Files entry from the Quick Index and from the Folder Tree View
 # (if specified).
 # The default value is: YES.

-SHOW_FILES             = YES
+SHOW_FILES = YES

 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
 # page. This will remove the Namespaces entry from the Quick Index and from the
 # Folder Tree View (if specified).
 # The default value is: YES.

-SHOW_NAMESPACES        = YES
+SHOW_NAMESPACES = YES

 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
 # doxygen should invoke to get the current version for each file (typically from
@@ -664,7 +664,7 @@ SHOW_NAMESPACES        = YES
 # by doxygen. Whatever the program writes to standard output is used as the file
 # version. For an example see the documentation.

-FILE_VERSION_FILTER    =
+FILE_VERSION_FILTER = 

 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
@@ -677,7 +677,7 @@ FILE_VERSION_FILTER    =
 # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
 # tag is left empty.

-LAYOUT_FILE            =
+LAYOUT_FILE = 

 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
@@ -687,7 +687,7 @@ LAYOUT_FILE            =
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. See also \cite for info how to create references.

-CITE_BIB_FILES         =
+CITE_BIB_FILES = 

 #---------------------------------------------------------------------------
 # Configuration options related to warning and progress messages
@@ -698,7 +698,7 @@ CITE_BIB_FILES         =
 # messages are off.
 # The default value is: NO.

-QUIET                  = NO
+QUIET = NO

 # The WARNINGS tag can be used to turn on/off the warning messages that are
 # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
@@ -707,14 +707,14 @@ QUIET                  = NO
 # Tip: Turn warnings on while writing the documentation.
 # The default value is: YES.

-WARNINGS               = YES
+WARNINGS = YES

 # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
 # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
 # will automatically be disabled.
 # The default value is: YES.

-WARN_IF_UNDOCUMENTED   = NO
+WARN_IF_UNDOCUMENTED = NO

 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
 # potential errors in the documentation, such as not documenting some parameters
@@ -722,7 +722,7 @@ WARN_IF_UNDOCUMENTED   = NO
 # markup commands wrongly.
 # The default value is: YES.

-WARN_IF_DOC_ERROR      = YES
+WARN_IF_DOC_ERROR = YES

 # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
 # are documented, but have no documentation for their parameters or return
@@ -730,7 +730,7 @@ WARN_IF_DOC_ERROR      = YES
 # parameter documentation, but not about the absence of documentation.
 # The default value is: NO.

-WARN_NO_PARAMDOC       = NO
+WARN_NO_PARAMDOC = NO

 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
 # can produce. The string should contain the $file, $line, and $text tags, which
@@ -740,13 +740,13 @@ WARN_NO_PARAMDOC       = NO
 # FILE_VERSION_FILTER)
 # The default value is: $file:$line: $text.

-WARN_FORMAT            = "$file:$line: $text"
+WARN_FORMAT = "$file:$line: $text"

 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
 # messages should be written. If left blank the output is written to standard
 # error (stderr).

-WARN_LOGFILE           =
+WARN_LOGFILE = 

 #---------------------------------------------------------------------------
 # Configuration options related to the input files
@@ -758,7 +758,7 @@ WARN_LOGFILE           =
 # spaces.
 # Note: If this tag is empty the current directory is searched.

-INPUT                  =
+INPUT = 

 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
@@ -767,7 +767,7 @@ INPUT                  =
 # possible encodings.
 # The default value is: UTF-8.

-INPUT_ENCODING         = UTF-8
+INPUT_ENCODING = UTF-8

 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
@@ -778,13 +778,13 @@ INPUT_ENCODING         = UTF-8
 # *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
 # *.qsf, *.as and *.js.

-FILE_PATTERNS          =
+FILE_PATTERNS = 

 # The RECURSIVE tag can be used to specify whether or not subdirectories should
 # be searched for input files as well.
 # The default value is: NO.

-RECURSIVE              = NO
+RECURSIVE = NO

 # The EXCLUDE tag can be used to specify files and/or directories that should be
 # excluded from the INPUT source files. This way you can easily exclude a
@@ -793,14 +793,14 @@ RECURSIVE              = NO
 # Note that relative paths are relative to the directory from which doxygen is
 # run.

-EXCLUDE                =
+EXCLUDE = 

 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
 # from the input.
 # The default value is: NO.

-EXCLUDE_SYMLINKS       = NO
+EXCLUDE_SYMLINKS = NO

 # If the value of the INPUT tag contains directories, you can use the
 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
@@ -809,7 +809,7 @@ EXCLUDE_SYMLINKS       = NO
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories for example use the pattern */test/*

-EXCLUDE_PATTERNS       =
+EXCLUDE_PATTERNS = 

 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
 # (namespaces, classes, functions, etc.) that should be excluded from the
@@ -820,33 +820,33 @@ EXCLUDE_PATTERNS       =
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories use the pattern */test/*

-EXCLUDE_SYMBOLS        =
+EXCLUDE_SYMBOLS = 

 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
 # that contain example code fragments that are included (see the \include
 # command).

-EXAMPLE_PATH           =
+EXAMPLE_PATH = 

 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
 # *.h) to filter out the source-files in the directories. If left blank all
 # files are included.

-EXAMPLE_PATTERNS       =
+EXAMPLE_PATTERNS = 

 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
 # searched for input files to be used with the \include or \dontinclude commands
 # irrespective of the value of the RECURSIVE tag.
 # The default value is: NO.

-EXAMPLE_RECURSIVE      = NO
+EXAMPLE_RECURSIVE = NO

 # The IMAGE_PATH tag can be used to specify one or more files or directories
 # that contain images that are to be included in the documentation (see the
 # \image command).

-IMAGE_PATH             =
+IMAGE_PATH = 

 # The INPUT_FILTER tag can be used to specify a program that doxygen should
 # invoke to filter for each input file. Doxygen will invoke the filter program
@@ -863,7 +863,7 @@ IMAGE_PATH             =
 # code is scanned, but not when the output code is generated. If lines are added
 # or removed, the anchors will not be placed correctly.

-INPUT_FILTER           =
+INPUT_FILTER = 

 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
 # basis. Doxygen will compare the file name with each pattern and apply the
@@ -872,14 +872,14 @@ INPUT_FILTER           =
 # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
 # patterns match the file name, INPUT_FILTER is applied.

-FILTER_PATTERNS        =
+FILTER_PATTERNS = 

 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
 # INPUT_FILTER) will also be used to filter the input files that are used for
 # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
 # The default value is: NO.

-FILTER_SOURCE_FILES    = NO
+FILTER_SOURCE_FILES = NO

 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
 # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
@@ -887,14 +887,14 @@ FILTER_SOURCE_FILES    = NO
 # *.ext= (so without naming a filter).
 # This tag requires that the tag FILTER_SOURCE_FILES is set to YES.

-FILTER_SOURCE_PATTERNS =
+FILTER_SOURCE_PATTERNS = 

 # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
 # is part of the input, its contents will be placed on the main page
 # (index.html). This can be useful if you have a project on for instance GitHub
 # and want to reuse the introduction page also for the doxygen output.

-USE_MDFILE_AS_MAINPAGE =
+USE_MDFILE_AS_MAINPAGE = 

 #---------------------------------------------------------------------------
 # Configuration options related to source browsing
@@ -907,20 +907,20 @@ USE_MDFILE_AS_MAINPAGE =
 # also VERBATIM_HEADERS is set to NO.
 # The default value is: NO.

-SOURCE_BROWSER         = NO
+SOURCE_BROWSER = NO

 # Setting the INLINE_SOURCES tag to YES will include the body of functions,
 # classes and enums directly into the documentation.
 # The default value is: NO.

-INLINE_SOURCES         = NO
+INLINE_SOURCES = NO

 # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
 # special comment blocks from generated source code fragments. Normal C, C++ and
 # Fortran comments will always remain visible.
 # The default value is: YES.

-STRIP_CODE_COMMENTS    = YES
+STRIP_CODE_COMMENTS = YES

 # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
 # function all documented functions referencing it will be listed.
@@ -932,7 +932,7 @@ REFERENCED_BY_RELATION = NO
 # all documented entities called/used by that function will be listed.
 # The default value is: NO.

-REFERENCES_RELATION    = NO
+REFERENCES_RELATION = NO

 # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
 # to YES then the hyperlinks from functions in REFERENCES_RELATION and
@@ -950,7 +950,7 @@ REFERENCES_LINK_SOURCE = YES
 # The default value is: YES.
 # This tag requires that the tag SOURCE_BROWSER is set to YES.

-SOURCE_TOOLTIPS        = YES
+SOURCE_TOOLTIPS = YES

 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
@@ -972,7 +972,7 @@ SOURCE_TOOLTIPS        = YES
 # The default value is: NO.
 # This tag requires that the tag SOURCE_BROWSER is set to YES.

-USE_HTAGS              = NO
+USE_HTAGS = NO

 # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
 # verbatim copy of the header file for each class for which an include is
@@ -980,7 +980,7 @@ USE_HTAGS              = NO
 # See also: Section \class.
 # The default value is: YES.

-VERBATIM_HEADERS       = YES
+VERBATIM_HEADERS = YES

 # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
 # clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
@@ -999,7 +999,7 @@ CLANG_ASSISTED_PARSING = NO
 # specified with INPUT and INCLUDE_PATH.
 # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.

-CLANG_OPTIONS          =
+CLANG_OPTIONS = 

 #---------------------------------------------------------------------------
 # Configuration options related to the alphabetical class index
@@ -1010,14 +1010,14 @@ CLANG_OPTIONS          =
 # classes, structs, unions or interfaces.
 # The default value is: YES.

-ALPHABETICAL_INDEX     = YES
+ALPHABETICAL_INDEX = YES

 # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
 # which the alphabetical index list will be split.
 # Minimum value: 1, maximum value: 20, default value: 5.
 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

-COLS_IN_ALPHA_INDEX    = 5
+COLS_IN_ALPHA_INDEX = 5

 # In case all classes in a project start with a common prefix, all classes will
 # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
@@ -1025,7 +1025,7 @@ COLS_IN_ALPHA_INDEX    = 5
 # while generating the index headers.
 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

-IGNORE_PREFIX          =
+IGNORE_PREFIX = 

 #---------------------------------------------------------------------------
 # Configuration options related to the HTML output
@@ -1034,7 +1034,7 @@ IGNORE_PREFIX          =
 # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
 # The default value is: YES.

-GENERATE_HTML          = YES
+GENERATE_HTML = YES

 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
@@ -1042,14 +1042,14 @@ GENERATE_HTML          = YES
 # The default directory is: html.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_OUTPUT            = html
+HTML_OUTPUT = html

 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
 # generated HTML page (for example: .htm, .php, .asp).
 # The default value is: .html.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_FILE_EXTENSION    = .html
+HTML_FILE_EXTENSION = .html

 # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
 # each generated HTML page. If the tag is left blank doxygen will generate a
@@ -1069,7 +1069,7 @@ HTML_FILE_EXTENSION    = .html
 # of the possible markers and block names see the documentation.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_HEADER            =
+HTML_HEADER = 

 # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
 # generated HTML page. If the tag is left blank doxygen will generate a standard
@@ -1079,7 +1079,7 @@ HTML_HEADER            =
 # that doxygen normally uses.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_FOOTER            =
+HTML_FOOTER = 

 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
 # sheet that is used by each HTML page. It can be used to fine-tune the look of
@@ -1091,7 +1091,7 @@ HTML_FOOTER            =
 # obsolete.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_STYLESHEET        =
+HTML_STYLESHEET = 

 # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
 # cascading style sheets that are included after the standard style sheets
@@ -1104,7 +1104,7 @@ HTML_STYLESHEET        =
 # list). For an example see the documentation.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_EXTRA_STYLESHEET  =
+HTML_EXTRA_STYLESHEET = 

 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
 # other source files which should be copied to the HTML output directory. Note
@@ -1114,7 +1114,7 @@ HTML_EXTRA_STYLESHEET  =
 # files will be copied as-is; there are no commands or markers available.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_EXTRA_FILES       =
+HTML_EXTRA_FILES = 

 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
@@ -1125,7 +1125,7 @@ HTML_EXTRA_FILES       =
 # Minimum value: 0, maximum value: 359, default value: 220.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_COLORSTYLE_HUE    = 220
+HTML_COLORSTYLE_HUE = 220

 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
 # in the HTML output. For a value of 0 the output will use grayscales only. A
@@ -1133,7 +1133,7 @@ HTML_COLORSTYLE_HUE    = 220
 # Minimum value: 0, maximum value: 255, default value: 100.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_COLORSTYLE_SAT    = 100
+HTML_COLORSTYLE_SAT = 100

 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
 # luminance component of the colors in the HTML output. Values below 100
@@ -1144,7 +1144,7 @@ HTML_COLORSTYLE_SAT    = 100
 # Minimum value: 40, maximum value: 240, default value: 80.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_COLORSTYLE_GAMMA  = 80
+HTML_COLORSTYLE_GAMMA = 80

 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
 # page will contain the date and time when the page was generated. Setting this
@@ -1153,7 +1153,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_TIMESTAMP         = NO
+HTML_TIMESTAMP = NO

 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
@@ -1161,7 +1161,7 @@ HTML_TIMESTAMP         = NO
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-HTML_DYNAMIC_SECTIONS  = NO
+HTML_DYNAMIC_SECTIONS = NO

 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
 # shown in the various tree structured indices initially; the user can expand
@@ -1188,7 +1188,7 @@ HTML_INDEX_NUM_ENTRIES = 100
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-GENERATE_DOCSET        = NO
+GENERATE_DOCSET = NO

 # This tag determines the name of the docset feed. A documentation feed provides
 # an umbrella under which multiple documentation sets from a single provider
@@ -1196,7 +1196,7 @@ GENERATE_DOCSET        = NO
 # The default value is: Doxygen generated docs.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.

-DOCSET_FEEDNAME        = "Doxygen generated docs"
+DOCSET_FEEDNAME = "Doxygen generated docs"

 # This tag specifies a string that should uniquely identify the documentation
 # set bundle. This should be a reverse domain-name style string, e.g.
@@ -1204,7 +1204,7 @@ DOCSET_FEEDNAME        = "Doxygen generated docs"
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.

-DOCSET_BUNDLE_ID       = org.doxygen.Project
+DOCSET_BUNDLE_ID = org.doxygen.Project

 # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
 # the documentation publisher. This should be a reverse domain-name style
@@ -1212,13 +1212,13 @@ DOCSET_BUNDLE_ID       = org.doxygen.Project
 # The default value is: org.doxygen.Publisher.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.

-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher

 # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
 # The default value is: Publisher.
 # This tag requires that the tag GENERATE_DOCSET is set to YES.

-DOCSET_PUBLISHER_NAME  = Publisher
+DOCSET_PUBLISHER_NAME = Publisher

 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
@@ -1236,14 +1236,14 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-GENERATE_HTMLHELP      = NO
+GENERATE_HTMLHELP = NO

 # The CHM_FILE tag can be used to specify the file name of the resulting .chm
 # file. You can add a path in front of the file if the result should not be
 # written to the html output directory.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.

-CHM_FILE               =
+CHM_FILE = 

 # The HHC_LOCATION tag can be used to specify the location (absolute path
 # including file name) of the HTML help compiler (hhc.exe). If non-empty,
@@ -1251,20 +1251,20 @@ CHM_FILE               =
 # The file has to be specified with full path.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.

-HHC_LOCATION           =
+HHC_LOCATION = 

 # The GENERATE_CHI flag controls if a separate .chi index file is generated
 # (YES) or that it should be included in the master .chm file (NO).
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.

-GENERATE_CHI           = NO
+GENERATE_CHI = NO

 # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
 # and project file content.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.

-CHM_INDEX_ENCODING     =
+CHM_INDEX_ENCODING = 

 # The BINARY_TOC flag controls whether a binary table of contents is generated
 # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
@@ -1272,14 +1272,14 @@ CHM_INDEX_ENCODING     =
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.

-BINARY_TOC             = NO
+BINARY_TOC = NO

 # The TOC_EXPAND flag can be set to YES to add extra items for group members to
 # the table of contents of the HTML help documentation and to the tree view.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.

-TOC_EXPAND             = NO
+TOC_EXPAND = NO

 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
@@ -1288,14 +1288,14 @@ TOC_EXPAND             = NO
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-GENERATE_QHP           = NO
+GENERATE_QHP = NO

 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
 # the file name of the resulting .qch file. The path specified is relative to
 # the HTML output folder.
 # This tag requires that the tag GENERATE_QHP is set to YES.

-QCH_FILE               =
+QCH_FILE = 

 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
@@ -1303,7 +1303,7 @@ QCH_FILE               =
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.

-QHP_NAMESPACE          = org.doxygen.Project
+QHP_NAMESPACE = org.doxygen.Project

 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
@@ -1312,7 +1312,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.

-QHP_VIRTUAL_FOLDER     = doc
+QHP_VIRTUAL_FOLDER = doc

 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
@@ -1320,7 +1320,7 @@ QHP_VIRTUAL_FOLDER     = doc
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.

-QHP_CUST_FILTER_NAME   =
+QHP_CUST_FILTER_NAME = 

 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
@@ -1328,21 +1328,21 @@ QHP_CUST_FILTER_NAME   =
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.

-QHP_CUST_FILTER_ATTRS  =
+QHP_CUST_FILTER_ATTRS = 

 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
 # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.

-QHP_SECT_FILTER_ATTRS  =
+QHP_SECT_FILTER_ATTRS = 

 # The QHG_LOCATION tag can be used to specify the location of Qt's
 # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
 # generated .qhp file.
 # This tag requires that the tag GENERATE_QHP is set to YES.

-QHG_LOCATION           =
+QHG_LOCATION = 

 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
 # generated, together with the HTML files, they form an Eclipse help plugin. To
@@ -1354,7 +1354,7 @@ QHG_LOCATION           =
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-GENERATE_ECLIPSEHELP   = NO
+GENERATE_ECLIPSEHELP = NO

 # A unique identifier for the Eclipse help plugin. When installing the plugin
 # the directory name containing the HTML and XML files should also have this
@@ -1362,7 +1362,7 @@ GENERATE_ECLIPSEHELP   = NO
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.

-ECLIPSE_DOC_ID         = org.doxygen.Project
+ECLIPSE_DOC_ID = org.doxygen.Project

 # If you want full control over the layout of the generated HTML pages it might
 # be necessary to disable the index and replace it with your own. The
@@ -1373,7 +1373,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-DISABLE_INDEX          = NO
+DISABLE_INDEX = NO

 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information. If the tag
@@ -1390,7 +1390,7 @@ DISABLE_INDEX          = NO
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-GENERATE_TREEVIEW      = NO
+GENERATE_TREEVIEW = NO

 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
 # doxygen will group on one line in the generated HTML documentation.
@@ -1400,21 +1400,21 @@ GENERATE_TREEVIEW      = NO
 # Minimum value: 0, maximum value: 20, default value: 4.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE = 4

 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
 # to set the initial width (in pixels) of the frame in which the tree is shown.
 # Minimum value: 0, maximum value: 1500, default value: 250.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-TREEVIEW_WIDTH         = 250
+TREEVIEW_WIDTH = 250

 # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
 # external symbols imported via tag files in a separate window.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-EXT_LINKS_IN_WINDOW    = NO
+EXT_LINKS_IN_WINDOW = NO

 # Use this tag to change the font size of LaTeX formulas included as images in
 # the HTML documentation. When you change the font size after a successful
@@ -1423,7 +1423,7 @@ EXT_LINKS_IN_WINDOW    = NO
 # Minimum value: 8, maximum value: 50, default value: 10.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-FORMULA_FONTSIZE       = 10
+FORMULA_FONTSIZE = 10

 # Use the FORMULA_TRANPARENT tag to determine whether or not the images
 # generated for formulas are transparent PNGs. Transparent PNGs are not
@@ -1434,7 +1434,7 @@ FORMULA_FONTSIZE       = 10
 # The default value is: YES.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-FORMULA_TRANSPARENT    = YES
+FORMULA_TRANSPARENT = YES

 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
 # http://www.mathjax.org) which uses client side Javascript for the rendering
@@ -1445,7 +1445,7 @@ FORMULA_TRANSPARENT    = YES
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-USE_MATHJAX            = NO
+USE_MATHJAX = NO

 # When MathJax is enabled you can set the default output format to be used for
 # the MathJax output. See the MathJax site (see:
@@ -1455,7 +1455,7 @@ USE_MATHJAX            = NO
 # The default value is: HTML-CSS.
 # This tag requires that the tag USE_MATHJAX is set to YES.

-MATHJAX_FORMAT         = HTML-CSS
+MATHJAX_FORMAT = HTML-CSS

 # When MathJax is enabled you need to specify the location relative to the HTML
 # output directory using the MATHJAX_RELPATH option. The destination directory
@@ -1468,14 +1468,14 @@ MATHJAX_FORMAT         = HTML-CSS
 # The default value is: http://cdn.mathjax.org/mathjax/latest.
 # This tag requires that the tag USE_MATHJAX is set to YES.

-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest

 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
 # extension names that should be enabled during MathJax rendering. For example
 # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
 # This tag requires that the tag USE_MATHJAX is set to YES.

-MATHJAX_EXTENSIONS     =
+MATHJAX_EXTENSIONS = 

 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
@@ -1483,7 +1483,7 @@ MATHJAX_EXTENSIONS     =
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.

-MATHJAX_CODEFILE       =
+MATHJAX_CODEFILE = 

 # When the SEARCHENGINE tag is enabled doxygen will generate a search box for
 # the HTML output. The underlying search engine uses javascript and DHTML and
@@ -1504,7 +1504,7 @@ MATHJAX_CODEFILE       =
 # The default value is: YES.
 # This tag requires that the tag GENERATE_HTML is set to YES.

-SEARCHENGINE           = YES
+SEARCHENGINE = YES

 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
 # implemented using a web server instead of a web client using Javascript. There
@@ -1516,7 +1516,7 @@ SEARCHENGINE           = YES
 # The default value is: NO.
 # This tag requires that the tag SEARCHENGINE is set to YES.

-SERVER_BASED_SEARCH    = NO
+SERVER_BASED_SEARCH = NO

 # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
 # script for searching. Instead the search results are written to an XML file
@@ -1532,7 +1532,7 @@ SERVER_BASED_SEARCH    = NO
 # The default value is: NO.
 # This tag requires that the tag SEARCHENGINE is set to YES.

-EXTERNAL_SEARCH        = NO
+EXTERNAL_SEARCH = NO

 # The SEARCHENGINE_URL should point to a search engine hosted by a web server
 # which will return the search results when EXTERNAL_SEARCH is enabled.
@@ -1543,7 +1543,7 @@ EXTERNAL_SEARCH        = NO
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.

-SEARCHENGINE_URL       =
+SEARCHENGINE_URL = 

 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
 # search data is written to a file for indexing by an external tool. With the
@@ -1551,7 +1551,7 @@ SEARCHENGINE_URL       =
 # The default file is: searchdata.xml.
 # This tag requires that the tag SEARCHENGINE is set to YES.

-SEARCHDATA_FILE        = searchdata.xml
+SEARCHDATA_FILE = searchdata.xml

 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
 # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
@@ -1559,7 +1559,7 @@ SEARCHDATA_FILE        = searchdata.xml
 # projects and redirect the results back to the right project.
 # This tag requires that the tag SEARCHENGINE is set to YES.

-EXTERNAL_SEARCH_ID     =
+EXTERNAL_SEARCH_ID = 

 # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
 # projects other than the one defined by this configuration file, but that are
@@ -1569,7 +1569,7 @@ EXTERNAL_SEARCH_ID     =
 # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
 # This tag requires that the tag SEARCHENGINE is set to YES.

-EXTRA_SEARCH_MAPPINGS  =
+EXTRA_SEARCH_MAPPINGS = 

 #---------------------------------------------------------------------------
 # Configuration options related to the LaTeX output
@@ -1578,7 +1578,7 @@ EXTRA_SEARCH_MAPPINGS  =
 # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
 # The default value is: YES.

-GENERATE_LATEX         = NO
+GENERATE_LATEX = NO

 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
@@ -1586,7 +1586,7 @@ GENERATE_LATEX         = NO
 # The default directory is: latex.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_OUTPUT           = latex
+LATEX_OUTPUT = latex

 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
 # invoked.
@@ -1597,14 +1597,14 @@ LATEX_OUTPUT           = latex
 # The default file is: latex.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_CMD_NAME         = latex
+LATEX_CMD_NAME = latex

 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
 # index for LaTeX.
 # The default file is: makeindex.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-MAKEINDEX_CMD_NAME     = makeindex
+MAKEINDEX_CMD_NAME = makeindex

 # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
 # documents. This may be useful for small projects and may help to save some
@@ -1612,7 +1612,7 @@ MAKEINDEX_CMD_NAME     = makeindex
 # The default value is: NO.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-COMPACT_LATEX          = NO
+COMPACT_LATEX = NO

 # The PAPER_TYPE tag can be used to set the paper type that is used by the
 # printer.
@@ -1621,7 +1621,7 @@ COMPACT_LATEX          = NO
 # The default value is: a4.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-PAPER_TYPE             = a4
+PAPER_TYPE = a4

 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
 # that should be included in the LaTeX output. To get the times font for
@@ -1630,7 +1630,7 @@ PAPER_TYPE             = a4
 # If left blank no extra packages will be included.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-EXTRA_PACKAGES         =
+EXTRA_PACKAGES = 

 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
 # generated LaTeX document. The header should contain everything until the first
@@ -1646,7 +1646,7 @@ EXTRA_PACKAGES         =
 # to HTML_HEADER.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_HEADER           =
+LATEX_HEADER = 

 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
 # generated LaTeX document. The footer should contain everything after the last
@@ -1657,7 +1657,7 @@ LATEX_HEADER           =
 # Note: Only use a user-defined footer if you know what you are doing!
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_FOOTER           =
+LATEX_FOOTER = 

 # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
 # LaTeX style sheets that are included after the standard style sheets created
@@ -1668,7 +1668,7 @@ LATEX_FOOTER           =
 # list).
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_EXTRA_STYLESHEET =
+LATEX_EXTRA_STYLESHEET = 

 # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
 # other source files which should be copied to the LATEX_OUTPUT output
@@ -1676,7 +1676,7 @@ LATEX_EXTRA_STYLESHEET =
 # markers available.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_EXTRA_FILES      =
+LATEX_EXTRA_FILES = 

 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
 # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
@@ -1685,7 +1685,7 @@ LATEX_EXTRA_FILES      =
 # The default value is: YES.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-PDF_HYPERLINKS         = YES
+PDF_HYPERLINKS = YES

 # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
 # the PDF file directly from the LaTeX files. Set this option to YES, to get a
@@ -1693,7 +1693,7 @@ PDF_HYPERLINKS         = YES
 # The default value is: YES.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-USE_PDFLATEX           = YES
+USE_PDFLATEX = YES

 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
 # command to the generated LaTeX files. This will instruct LaTeX to keep running
@@ -1702,14 +1702,14 @@ USE_PDFLATEX           = YES
 # The default value is: NO.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_BATCHMODE        = NO
+LATEX_BATCHMODE = NO

 # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
 # index chapters (such as File Index, Compound Index, etc.) in the output.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_HIDE_INDICES     = NO
+LATEX_HIDE_INDICES = NO

 # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
 # code with syntax highlighting in the LaTeX output.
@@ -1719,7 +1719,7 @@ LATEX_HIDE_INDICES     = NO
 # The default value is: NO.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_SOURCE_CODE      = NO
+LATEX_SOURCE_CODE = NO

 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
@@ -1727,7 +1727,7 @@ LATEX_SOURCE_CODE      = NO
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.

-LATEX_BIB_STYLE        = plain
+LATEX_BIB_STYLE = plain

 #---------------------------------------------------------------------------
 # Configuration options related to the RTF output
@@ -1738,7 +1738,7 @@ LATEX_BIB_STYLE        = plain
 # readers/editors.
 # The default value is: NO.

-GENERATE_RTF           = NO
+GENERATE_RTF = NO

 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
@@ -1746,7 +1746,7 @@ GENERATE_RTF           = NO
 # The default directory is: rtf.
 # This tag requires that the tag GENERATE_RTF is set to YES.

-RTF_OUTPUT             = rtf
+RTF_OUTPUT = rtf

 # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
 # documents. This may be useful for small projects and may help to save some
@@ -1754,7 +1754,7 @@ RTF_OUTPUT             = rtf
 # The default value is: NO.
 # This tag requires that the tag GENERATE_RTF is set to YES.

-COMPACT_RTF            = NO
+COMPACT_RTF = NO

 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
 # contain hyperlink fields. The RTF file will contain links (just like the HTML
@@ -1766,7 +1766,7 @@ COMPACT_RTF            = NO
 # The default value is: NO.
 # This tag requires that the tag GENERATE_RTF is set to YES.

-RTF_HYPERLINKS         = NO
+RTF_HYPERLINKS = NO

 # Load stylesheet definitions from file. Syntax is similar to doxygen's config
 # file, i.e. a series of assignments. You only have to provide replacements,
@@ -1776,14 +1776,14 @@ RTF_HYPERLINKS         = NO
 # default style sheet that doxygen normally uses.
 # This tag requires that the tag GENERATE_RTF is set to YES.

-RTF_STYLESHEET_FILE    =
+RTF_STYLESHEET_FILE = 

 # Set optional variables used in the generation of an RTF document. Syntax is
 # similar to doxygen's config file. A template extensions file can be generated
 # using doxygen -e rtf extensionFile.
 # This tag requires that the tag GENERATE_RTF is set to YES.

-RTF_EXTENSIONS_FILE    =
+RTF_EXTENSIONS_FILE = 

 # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
 # with syntax highlighting in the RTF output.
@@ -1793,7 +1793,7 @@ RTF_EXTENSIONS_FILE    =
 # The default value is: NO.
 # This tag requires that the tag GENERATE_RTF is set to YES.

-RTF_SOURCE_CODE        = NO
+RTF_SOURCE_CODE = NO

 #---------------------------------------------------------------------------
 # Configuration options related to the man page output
@@ -1803,7 +1803,7 @@ RTF_SOURCE_CODE        = NO
 # classes and files.
 # The default value is: NO.

-GENERATE_MAN           = NO
+GENERATE_MAN = NO

 # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
@@ -1812,7 +1812,7 @@ GENERATE_MAN           = NO
 # The default directory is: man.
 # This tag requires that the tag GENERATE_MAN is set to YES.

-MAN_OUTPUT             = man
+MAN_OUTPUT = man

 # The MAN_EXTENSION tag determines the extension that is added to the generated
 # man pages. In case the manual section does not start with a number, the number
@@ -1821,14 +1821,14 @@ MAN_OUTPUT             = man
 # The default value is: .3.
 # This tag requires that the tag GENERATE_MAN is set to YES.

-MAN_EXTENSION          = .3
+MAN_EXTENSION = .3

 # The MAN_SUBDIR tag determines the name of the directory created within
 # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
 # MAN_EXTENSION with the initial . removed.
 # This tag requires that the tag GENERATE_MAN is set to YES.

-MAN_SUBDIR             =
+MAN_SUBDIR = 

 # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
 # will generate one additional man file for each entity documented in the real
@@ -1837,7 +1837,7 @@ MAN_SUBDIR             =
 # The default value is: NO.
 # This tag requires that the tag GENERATE_MAN is set to YES.

-MAN_LINKS              = NO
+MAN_LINKS = NO

 #---------------------------------------------------------------------------
 # Configuration options related to the XML output
@@ -1847,7 +1847,7 @@ MAN_LINKS              = NO
 # captures the structure of the code including all documentation.
 # The default value is: NO.

-GENERATE_XML           = NO
+GENERATE_XML = NO

 # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
@@ -1855,7 +1855,7 @@ GENERATE_XML           = NO
 # The default directory is: xml.
 # This tag requires that the tag GENERATE_XML is set to YES.

-XML_OUTPUT             = xml
+XML_OUTPUT = xml

 # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
 # listings (including syntax highlighting and cross-referencing information) to
@@ -1864,7 +1864,7 @@ XML_OUTPUT             = xml
 # The default value is: YES.
 # This tag requires that the tag GENERATE_XML is set to YES.

-XML_PROGRAMLISTING     = YES
+XML_PROGRAMLISTING = YES

 #---------------------------------------------------------------------------
 # Configuration options related to the DOCBOOK output
@@ -1874,7 +1874,7 @@ XML_PROGRAMLISTING     = YES
 # that can be used to generate PDF.
 # The default value is: NO.

-GENERATE_DOCBOOK       = NO
+GENERATE_DOCBOOK = NO

 # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
@@ -1882,7 +1882,7 @@ GENERATE_DOCBOOK       = NO
 # The default directory is: docbook.
 # This tag requires that the tag GENERATE_DOCBOOK is set to YES.

-DOCBOOK_OUTPUT         = docbook
+DOCBOOK_OUTPUT = docbook

 # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
 # program listings (including syntax highlighting and cross-referencing
@@ -1903,7 +1903,7 @@ DOCBOOK_PROGRAMLISTING = NO
 # still experimental and incomplete at the moment.
 # The default value is: NO.

-GENERATE_AUTOGEN_DEF   = NO
+GENERATE_AUTOGEN_DEF = NO

 #---------------------------------------------------------------------------
 # Configuration options related to the Perl module output
@@ -1915,7 +1915,7 @@ GENERATE_AUTOGEN_DEF   = NO
 # Note that this feature is still experimental and incomplete at the moment.
 # The default value is: NO.

-GENERATE_PERLMOD       = NO
+GENERATE_PERLMOD = NO

 # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
 # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
@@ -1923,7 +1923,7 @@ GENERATE_PERLMOD       = NO
 # The default value is: NO.
 # This tag requires that the tag GENERATE_PERLMOD is set to YES.

-PERLMOD_LATEX          = NO
+PERLMOD_LATEX = NO

 # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
 # formatted so it can be parsed by a human reader. This is useful if you want to
@@ -1933,7 +1933,7 @@ PERLMOD_LATEX          = NO
 # The default value is: YES.
 # This tag requires that the tag GENERATE_PERLMOD is set to YES.

-PERLMOD_PRETTY         = YES
+PERLMOD_PRETTY = YES

 # The names of the make variables in the generated doxyrules.make file are
 # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
@@ -1941,7 +1941,7 @@ PERLMOD_PRETTY         = YES
 # overwrite each other's variables.
 # This tag requires that the tag GENERATE_PERLMOD is set to YES.

-PERLMOD_MAKEVAR_PREFIX =
+PERLMOD_MAKEVAR_PREFIX = 

 #---------------------------------------------------------------------------
 # Configuration options related to the preprocessor
@@ -1951,7 +1951,7 @@ PERLMOD_MAKEVAR_PREFIX =
 # C-preprocessor directives found in the sources and include files.
 # The default value is: YES.

-ENABLE_PREPROCESSING   = YES
+ENABLE_PREPROCESSING = YES

 # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
 # in the source code. If set to NO, only conditional compilation will be
@@ -1960,7 +1960,7 @@ ENABLE_PREPROCESSING   = YES
 # The default value is: NO.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

-MACRO_EXPANSION        = NO
+MACRO_EXPANSION = NO

 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
 # the macro expansion is limited to the macros specified with the PREDEFINED and
@@ -1968,21 +1968,21 @@ MACRO_EXPANSION        = NO
 # The default value is: NO.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

-EXPAND_ONLY_PREDEF     = NO
+EXPAND_ONLY_PREDEF = NO

 # If the SEARCH_INCLUDES tag is set to YES, the include files in the
 # INCLUDE_PATH will be searched if a #include is found.
 # The default value is: YES.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

-SEARCH_INCLUDES        = YES
+SEARCH_INCLUDES = YES

 # The INCLUDE_PATH tag can be used to specify one or more directories that
 # contain include files that are not input files but should be processed by the
 # preprocessor.
 # This tag requires that the tag SEARCH_INCLUDES is set to YES.

-INCLUDE_PATH           =
+INCLUDE_PATH = 

 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
 # patterns (like *.h and *.hpp) to filter out the header-files in the
@@ -1990,7 +1990,7 @@ INCLUDE_PATH           =
 # used.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

-INCLUDE_FILE_PATTERNS  =
+INCLUDE_FILE_PATTERNS = 

 # The PREDEFINED tag can be used to specify one or more macro names that are
 # defined before the preprocessor is started (similar to the -D option of e.g.
@@ -2000,7 +2000,7 @@ INCLUDE_FILE_PATTERNS  =
 # recursively expanded use the := operator instead of the = operator.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

-PREDEFINED             =
+PREDEFINED = 

 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
 # tag can be used to specify a list of macro names that should be expanded. The
@@ -2009,7 +2009,7 @@ PREDEFINED             =
 # definition found in the source code.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

-EXPAND_AS_DEFINED      =
+EXPAND_AS_DEFINED = 

 # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
 # remove all references to function-like macros that are alone on a line, have
@@ -2019,7 +2019,7 @@ EXPAND_AS_DEFINED      =
 # The default value is: YES.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

-SKIP_FUNCTION_MACROS   = YES
+SKIP_FUNCTION_MACROS = YES

 #---------------------------------------------------------------------------
 # Configuration options related to external references
@@ -2038,40 +2038,40 @@ SKIP_FUNCTION_MACROS   = YES
 # the path). If a tag file is not located in the directory in which doxygen is
 # run, you must also specify the path to the tagfile here.

-TAGFILES               =
+TAGFILES = 

 # When a file name is specified after GENERATE_TAGFILE, doxygen will create a
 # tag file that is based on the input files it reads. See section "Linking to
 # external documentation" for more information about the usage of tag files.

-GENERATE_TAGFILE       =
+GENERATE_TAGFILE = 

 # If the ALLEXTERNALS tag is set to YES, all external class will be listed in
 # the class index. If set to NO, only the inherited external classes will be
 # listed.
 # The default value is: NO.

-ALLEXTERNALS           = NO
+ALLEXTERNALS = NO

 # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
 # in the modules index. If set to NO, only the current project's groups will be
 # listed.
 # The default value is: YES.

-EXTERNAL_GROUPS        = YES
+EXTERNAL_GROUPS = YES

 # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
 # the related pages index. If set to NO, only the current project's pages will
 # be listed.
 # The default value is: YES.

-EXTERNAL_PAGES         = YES
+EXTERNAL_PAGES = YES

 # The PERL_PATH should be the absolute path and name of the perl script
 # interpreter (i.e. the result of 'which perl').
 # The default file (with absolute path) is: /usr/bin/perl.

-PERL_PATH              = /usr/bin/perl
+PERL_PATH = /usr/bin/perl

 #---------------------------------------------------------------------------
 # Configuration options related to the dot tool
@@ -2084,7 +2084,7 @@ PERL_PATH              = /usr/bin/perl
 # powerful graphs.
 # The default value is: YES.

-CLASS_DIAGRAMS         = YES
+CLASS_DIAGRAMS = YES

 # You can define message sequence charts within doxygen comments using the \msc
 # command. Doxygen will then run the mscgen tool (see:
@@ -2093,20 +2093,20 @@ CLASS_DIAGRAMS         = YES
 # the mscgen tool resides. If left empty the tool is assumed to be found in the
 # default search path.

-MSCGEN_PATH            =
+MSCGEN_PATH = 

 # You can include diagrams made with dia in doxygen documentation. Doxygen will
 # then run dia to produce the diagram and insert it in the documentation. The
 # DIA_PATH tag allows you to specify the directory where the dia binary resides.
 # If left empty dia is assumed to be found in the default search path.

-DIA_PATH               =
+DIA_PATH = 

 # If set to YES the inheritance and collaboration graphs will hide inheritance
 # and usage relations if the target is undocumented or is not a class.
 # The default value is: YES.

-HIDE_UNDOC_RELATIONS   = YES
+HIDE_UNDOC_RELATIONS = YES

 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
 # available from the path. This tool is part of Graphviz (see:
@@ -2115,7 +2115,7 @@ HIDE_UNDOC_RELATIONS   = YES
 # set to NO
 # The default value is: YES.

-HAVE_DOT               = YES
+HAVE_DOT = YES

 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
 # to run in parallel. When set to 0 doxygen will base this on the number of
@@ -2125,7 +2125,7 @@ HAVE_DOT               = YES
 # Minimum value: 0, maximum value: 32, default value: 0.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_NUM_THREADS        = 0
+DOT_NUM_THREADS = 0

 # When you want a differently looking font in the dot files that doxygen
 # generates you can specify the font name using DOT_FONTNAME. You need to make
@@ -2135,21 +2135,21 @@ DOT_NUM_THREADS        = 0
 # The default value is: Helvetica.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_FONTNAME           = Helvetica
+DOT_FONTNAME = Helvetica

 # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
 # dot graphs.
 # Minimum value: 4, maximum value: 24, default value: 10.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_FONTSIZE           = 10
+DOT_FONTSIZE = 10

 # By default doxygen will tell dot to use the default font as specified with
 # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
 # the path where dot can find it using this tag.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_FONTPATH           =
+DOT_FONTPATH = 

 # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
 # each documented class showing the direct and indirect inheritance relations.
@@ -2157,7 +2157,7 @@ DOT_FONTPATH           =
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-CLASS_GRAPH            = YES
+CLASS_GRAPH = YES

 # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
 # graph for each documented class showing the direct and indirect implementation
@@ -2166,14 +2166,14 @@ CLASS_GRAPH            = YES
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-COLLABORATION_GRAPH    = YES
+COLLABORATION_GRAPH = YES

 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
 # groups, showing the direct groups dependencies.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-GROUP_GRAPHS           = YES
+GROUP_GRAPHS = YES

 # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
 # collaboration diagrams in a style similar to the OMG's Unified Modeling
@@ -2181,7 +2181,7 @@ GROUP_GRAPHS           = YES
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.

-UML_LOOK               = NO
+UML_LOOK = NO

 # If the UML_LOOK tag is enabled, the fields and methods are shown inside the
 # class node. If there are many fields or methods and many nodes the graph may
@@ -2194,7 +2194,7 @@ UML_LOOK               = NO
 # Minimum value: 0, maximum value: 100, default value: 10.
 # This tag requires that the tag HAVE_DOT is set to YES.

-UML_LIMIT_NUM_FIELDS   = 10
+UML_LIMIT_NUM_FIELDS = 10

 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
 # collaboration graphs will show the relations between templates and their
@@ -2202,7 +2202,7 @@ UML_LIMIT_NUM_FIELDS   = 10
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.

-TEMPLATE_RELATIONS     = NO
+TEMPLATE_RELATIONS = NO

 # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
 # YES then doxygen will generate a graph for each documented file showing the
@@ -2211,7 +2211,7 @@ TEMPLATE_RELATIONS     = NO
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-INCLUDE_GRAPH          = YES
+INCLUDE_GRAPH = YES

 # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
 # set to YES then doxygen will generate a graph for each documented file showing
@@ -2220,7 +2220,7 @@ INCLUDE_GRAPH          = YES
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-INCLUDED_BY_GRAPH      = YES
+INCLUDED_BY_GRAPH = YES

 # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
 # dependency graph for every global function or class method.
@@ -2231,7 +2231,7 @@ INCLUDED_BY_GRAPH      = YES
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.

-CALL_GRAPH             = NO
+CALL_GRAPH = NO

 # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
 # dependency graph for every global function or class method.
@@ -2242,14 +2242,14 @@ CALL_GRAPH             = NO
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.

-CALLER_GRAPH           = NO
+CALLER_GRAPH = NO

 # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
 # hierarchy of all classes instead of a textual one.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-GRAPHICAL_HIERARCHY    = YES
+GRAPHICAL_HIERARCHY = YES

 # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
 # dependencies a directory has on other directories in a graphical way. The
@@ -2258,7 +2258,7 @@ GRAPHICAL_HIERARCHY    = YES
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DIRECTORY_GRAPH        = YES
+DIRECTORY_GRAPH = YES

 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot.
@@ -2271,7 +2271,7 @@ DIRECTORY_GRAPH        = YES
 # The default value is: png.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_IMAGE_FORMAT       = png
+DOT_IMAGE_FORMAT = png

 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
 # enable generation of interactive SVG images that allow zooming and panning.
@@ -2283,32 +2283,32 @@ DOT_IMAGE_FORMAT       = png
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.

-INTERACTIVE_SVG        = NO
+INTERACTIVE_SVG = NO

 # The DOT_PATH tag can be used to specify the path where the dot tool can be
 # found. If left blank, it is assumed the dot tool can be found in the path.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_PATH               =
+DOT_PATH = 

 # The DOTFILE_DIRS tag can be used to specify one or more directories that
 # contain dot files that are included in the documentation (see the \dotfile
 # command).
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOTFILE_DIRS           =
+DOTFILE_DIRS = 

 # The MSCFILE_DIRS tag can be used to specify one or more directories that
 # contain msc files that are included in the documentation (see the \mscfile
 # command).

-MSCFILE_DIRS           =
+MSCFILE_DIRS = 

 # The DIAFILE_DIRS tag can be used to specify one or more directories that
 # contain dia files that are included in the documentation (see the \diafile
 # command).

-DIAFILE_DIRS           =
+DIAFILE_DIRS = 

 # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
 # path where java can find the plantuml.jar file. If left blank, it is assumed
@@ -2316,12 +2316,12 @@ DIAFILE_DIRS           =
 # generate a warning when it encounters a \startuml command in this case and
 # will not generate output for the diagram.

-PLANTUML_JAR_PATH      =
+PLANTUML_JAR_PATH = 

 # When using plantuml, the specified paths are searched for files specified by
 # the !include statement in a plantuml block.

-PLANTUML_INCLUDE_PATH  =
+PLANTUML_INCLUDE_PATH = 

 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
 # that will be shown in the graph. If the number of nodes in a graph becomes
@@ -2333,7 +2333,7 @@ PLANTUML_INCLUDE_PATH  =
 # Minimum value: 0, maximum value: 10000, default value: 50.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_GRAPH_MAX_NODES    = 50
+DOT_GRAPH_MAX_NODES = 50

 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
 # generated by dot. A depth value of 3 means that only nodes reachable from the
@@ -2345,7 +2345,7 @@ DOT_GRAPH_MAX_NODES    = 50
 # Minimum value: 0, maximum value: 1000, default value: 0.
 # This tag requires that the tag HAVE_DOT is set to YES.

-MAX_DOT_GRAPH_DEPTH    = 0
+MAX_DOT_GRAPH_DEPTH = 0

 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
 # background. This is disabled by default, because dot on Windows does not seem
@@ -2357,7 +2357,7 @@ MAX_DOT_GRAPH_DEPTH    = 0
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_TRANSPARENT        = NO
+DOT_TRANSPARENT = NO

 # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
@@ -2366,7 +2366,7 @@ DOT_TRANSPARENT        = NO
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_MULTI_TARGETS      = NO
+DOT_MULTI_TARGETS = NO

 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
 # explaining the meaning of the various boxes and arrows in the dot generated
@@ -2374,11 +2374,11 @@ DOT_MULTI_TARGETS      = NO
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-GENERATE_LEGEND        = YES
+GENERATE_LEGEND = YES

 # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
 # files that are used to generate the various graphs.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_CLEANUP            = YES
+DOT_CLEANUP = YES
--- a/camogm.h
+++ b/camogm.h
@@ -84,7 +84,7 @@
 /**
 * @struct rawdev_buffer
 * @brief Holds pointers related to raw device buffer operation
- * @var rawdv_buffer::rawdev_fd
+ * @var rawdev_buffer::rawdev_fd
 * File descriptor of open raw device
 * @var rawdev_buffer::rawdev_path
 * A string containing full path to raw device

--- a/camogm_jpeg.c
+++ b/camogm_jpeg.c
-/*!***************************************************************************
-   *! FILE NAME  : camogm_jpeg.c
-   *! DESCRIPTION: Provides writing to series of individual JPEG files for camogm
-   *! Copyright (C) 2007 Elphel, Inc.
-   *! -----------------------------------------------------------------------------**
-   *!  This program is free software: you can redistribute it and/or modify
-   *!  it under the terms of the GNU General Public License as published by
-   *!  the Free Software Foundation, either version 3 of the License, or
-   *!  (at your option) any later version.
-   *!
-   *!  This program is distributed in the hope that it will be useful,
-   *!  but WITHOUT ANY WARRANTY; without even the implied warranty of
-   *!  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   *!  GNU General Public License for more details.
-   *!
-   *!  You should have received a copy of the GNU General Public License
-   *!  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-   *! -----------------------------------------------------------------------------**
-   *!
-   *!  $Log: camogm_jpeg.c,v $
-   *!  Revision 1.2  2009/02/25 17:50:51  spectr_rain
-   *!  removed deprecated dependency
-   *!
-   *!  Revision 1.1.1.1  2008/11/27 20:04:01  elphel
-   *!
-   *!
-   *!  Revision 1.3  2008/04/11 23:09:33  elphel
-   *!  modified to handle kml generation
-   *!
-   *!  Revision 1.2  2007/11/19 03:23:21  elphel
-   *!  7.1.5.5 Added support for *.mov files in camogm.
-   *!
-   *!  Revision 1.1  2007/11/16 08:49:57  elphel
-   *!  Initial release of camogm - program to record video/image to the camera hard drive (or other storage)
-   *!
+/** @file camogm_jpeg.c
+ * @brief Provides writing to series of individual JPEG files for camogm
+ * @copyright Copyright (C) 2016 Elphel, Inc.
+ *
+ * @par <b>License</b>
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

+/** @brief This define is needed to use lseek64 and should be set before includes */
 #define _LARGEFILE64_SOURCE

 //!Not all are needed, just copied from the camogm.c
@@ -58,7 +39,7 @@
 //#include <sys/ioctl.h>

 //#include <c313a.h>
-#include <asm/byteorder.h>
+//#include <asm/byteorder.h>

 //#include <ogg/ogg.h>    // has to be before ogmstreams.h
 //#include "ogmstreams.h" // move it to <>?
@@ -119,17 +100,6 @@ int camogm_start_jpeg(camogm_state *state)
 	return 0;
 }

-
-void dump_chunk(struct iovec *vec)
-{
-	unsigned char *ptr = vec->iov_base;
-	for (int i = 0; i < vec->iov_len; i++) {
-		printf("0x%02x ", ptr[i]);
-		if (i % 15 == 0)
-			printf("\n");
-	}
-}
-
 /**
 * @brief Write single JPEG frame
 *
@@ -154,12 +124,6 @@ int camogm_frame_jpeg(camogm_state *state)
 			chunks_iovec[i].iov_len = state->packetchunks[i + 1].bytes;
 			l += chunks_iovec[i].iov_len;
 		}
-
-		printf("0 chunk dump:\n");
-		dump_chunk(&chunks_iovec[0]);
-		printf("1 chunk dump\n");
-		dump_chunk(&chunks_iovec[1]);
-
 		sprintf(state->path, "%s%010ld_%06ld.jpeg", state->path_prefix, state->this_frame_params[port].timestamp_sec, state->this_frame_params[port].timestamp_usec);
 		if (((state->ivf = open(state->path, O_RDWR | O_CREAT, 0777))) < 0) {
 			D0(fprintf(debug_file, "Error opening %s for writing, returned %d, errno=%d\n", state->path, state->ivf, errno));

--- a/camogm_jpeg.h
+++ b/camogm_jpeg.h
+/** @file camogm_jpeg.h
+ * @brief Provides writing to series of individual JPEG files for camogm
+ * @copyright Copyright (C) 2016 Elphel, Inc.
+ *
+ * @par <b>License</b>
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef _CAMOGM_JPEG_H
 #define _CAMOGM_JPEG_H


--- a/camogm_read.c
+++ b/camogm_read.c
@@ -2,7 +2,7 @@
 * @brief Provides reading data written to raw device storage and saving the data to a device with file system.
 * @copyright  Copyright (C) 2016 Elphel, Inc.
 *
- * <b>License:</b>
+ * @par <b>License</b>
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -15,7 +15,7 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

-/** @brief This define is needed to used lseek64 and should be set before includes */
+/** @brief This define is needed to use lseek64 and should be set before includes */
 #define _LARGEFILE64_SOURCE

 #include <stdio.h>
@@ -179,10 +179,6 @@ struct tiff_hdr {
 * @brief This structure holds data associated with currently opened file.
 * @var file_opts::fh
 * FILE pointer
- * @var file_opts::path_prefix
- * Contains path to currently opened file
- * @var file_opts::file_name
- * Contains full path to file currently opened file
 * @var file_opts::file_cntr
 * Indicates the number of files read from raw storage device
 * @var file_opts::file_state
@@ -251,7 +247,7 @@ static int find_marker(const unsigned char * restrict buff_ptr, ssize_t buff_sz,
 * @param[in,out] ifd   a pointer to a structure which should be converted
 * @return        None
 */
-void ifd_byte_order(struct ifd_entry *ifd)
+static void ifd_byte_order(struct ifd_entry *ifd)
 {
 	unsigned long offset;

@@ -266,10 +262,10 @@ void ifd_byte_order(struct ifd_entry *ifd)

 /**
 * @brief Convert byte order for all fields in #tiff_hdr structure
- * @param[in,out] ifd   a pointer to a structure which should be converted
+ * @param[in,out] hdr   a pointer to a structure which should be converted
 * @return        None
 */
-void hdr_byte_order(struct tiff_hdr *hdr)
+static void hdr_byte_order(struct tiff_hdr *hdr)
 {
 	hdr->byte_order = __be16_to_cpu(hdr->byte_order);
 	hdr->mark = __be16_to_cpu(hdr->mark);
@@ -285,7 +281,7 @@ void hdr_byte_order(struct tiff_hdr *hdr)
 * @param[out]  buff    buffer for the string
 * @return      The number of bytes placed to the read buffer
 */
-size_t exif_get_text(camogm_state *state, struct ifd_entry *ifd, unsigned char *buff)
+static size_t exif_get_text(camogm_state *state, struct ifd_entry *ifd, unsigned char *buff)
 {
 	size_t j = 0;
 	size_t sz = ifd->len * exif_data_fmt[ifd->format];
@@ -314,7 +310,7 @@ size_t exif_get_text(camogm_state *state, struct ifd_entry *ifd, unsigned char *
 *
 * where NN is PageNumber; YYYY, MM and DD are year, month and date extracted from DateTimeOriginal
 * field; HH, MM and SS are hours, minutes and seconds extracted from DateTimeOriginal field; UUUUUU is us
- * value extracted from SubSecTimeOriginal field. The function assumes that <e> name buffer is big enough
+ * value extracted from SubSecTimeOriginal field. The function assumes that @e name buffer is big enough
 * to hold the file name in the format shown above including the terminating null byte.
 * @param[in]   state   a pointer to a structure containing current state
 * @param[out]  name    resulting file name
@@ -410,7 +406,6 @@ static int make_fname(camogm_state *state, char *name)
 * @brief Create new file name string and open a file
 * @param[in]   f_op   pointer to a structure holding information about currently opened file
 * @return      \e FILE_OK if file was successfully opened and \e FILE_OPEN_ERR otherwise
- * @todo retrieve time stamp and use it in file name
 */
 static int start_new_file(struct file_opts *f_op)
 {