Skip to content

X
x393_sata
Commit 09f004b7 authored by Alexey Grebenkin's avatar Alexey Grebenkin
Browse files
Options

test axi files, incomplete

parent f50c8f46
Hide whitespace changes
Inline Side-by-side
Showing with 1038 additions and 0 deletions
README.md
View file @ 09f004b7
# x393_sata # x393_sata
SATA controller for x393 camera SATA controller for x393 camera
# Current step:
Creating simple testbench structure, placing some register @ axi iface (+axi slave onto maxigp1), simulate them.
To syntesize, try to access these registers (read+write)
# Going to do afterwards:
Connect Ashwin's core and make it work at least somehow (write system level tests and application level rtl). Write host controller with ~same functionallity, check if it works with previously verified higher-level code.
And then to spin out the full-compatible functionallity (ideally somewhere to the level of ahci)
axi_regs.v 0 → 100644
View file @ 09f004b7
/*******************************************************************************
* Module: axi_regs
* Date: 2015-07-11
* Author: Alexey
* Description: temporary registers, connected to axi bus
*
* Copyright (c) 2015 Elphel, Inc.
* axi_regs.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* axi_regs.v file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
/*
* Some common formulas for AXI:
* // - integer division, % - leftover
* addr = raddr(waddr) % device_memory_size
* size = arsize(awsize), size_bytes = 2^size, bus_width = log2(bus_width_bytes),
* bus_offset = addr % bus_width_bytes, aligned_bus_addr - address of the first byte on a bus
* word_addr - current memory word's index, word_size_bytes - memory word size
* For the i-th byte on a bus,
* -------burst_cnt = 0:
* aligned_bus_addr = addr // bus_width_bytes * bus_width_bytes
* word_addr[i] = (aligned_bus_addr + i) // word_size_bytes
* word_data[i] = mem[word_addr[i]]
* >data[i] = word_data[i][i % word_size]
* >atrobe[i] = i[bus_width:size] == bus_offset[bus_width:size] & i[size-1:0] >= bus_offset[size-1:0]
* -------burst_cnt > 0:
* let addr_-1 be an addr of a last burst
* Incremental
* addr = addr_-1 // size_bytes * size_bytes + size_bytes
*
* Wrapping
* addr = addr_-1 // size_bytes * size_bytes + size_bytes
*/
module axi_regs(
input wire ACLK, // AXI PS Master GP1 Clock , input
input wire ARESETN, // AXI PS Master GP1 Reset, output
// AXI PS Master GP1: Read Address
input wire [31:0] ARADDR, // AXI PS Master GP1 ARADDR[31:0], output
input wire ARVALID, // AXI PS Master GP1 ARVALID, output
output wire ARREADY, // AXI PS Master GP1 ARREADY, input
input wire [11:0] ARID, // AXI PS Master GP1 ARID[11:0], output
input wire [1:0] ARLOCK, // AXI PS Master GP1 ARLOCK[1:0], output
input wire [3:0] ARCACHE, // AXI PS Master GP1 ARCACHE[3:0], output
input wire [2:0] ARPROT, // AXI PS Master GP1 ARPROT[2:0], output
input wire [3:0] ARLEN, // AXI PS Master GP1 ARLEN[3:0], output
input wire [1:0] ARSIZE, // AXI PS Master GP1 ARSIZE[1:0], output
input wire [1:0] ARBURST, // AXI PS Master GP1 ARBURST[1:0], output
input wire [3:0] ARQOS, // AXI PS Master GP1 ARQOS[3:0], output
// AXI PS Master GP1: Read Data
output wire [31:0] RDATA, // AXI PS Master GP1 RDATA[31:0], input
output wire RVALID, // AXI PS Master GP1 RVALID, input
input wire RREADY, // AXI PS Master GP1 RREADY, output
output wire [11:0] RID, // AXI PS Master GP1 RID[11:0], input
output wire RLAST, // AXI PS Master GP1 RLAST, input
output wire [1:0] RRESP, // AXI PS Master GP1 RRESP[1:0], input
// AXI PS Master GP1: Write Address
input wire [31:0] AWADDR, // AXI PS Master GP1 AWADDR[31:0], output
input wire AWVALID, // AXI PS Master GP1 AWVALID, output
output wire AWREADY, // AXI PS Master GP1 AWREADY, input
input wire [11:0] AWID, // AXI PS Master GP1 AWID[11:0], output
input wire [1:0] AWLOCK, // AXI PS Master GP1 AWLOCK[1:0], output
input wire [3:0] AWCACHE, // AXI PS Master GP1 AWCACHE[3:0], output
input wire [2:0] AWPROT, // AXI PS Master GP1 AWPROT[2:0], output
input wire [3:0] AWLEN, // AXI PS Master GP1 AWLEN[3:0], outpu:t
input wire [1:0] AWSIZE, // AXI PS Master GP1 AWSIZE[1:0], output
input wire [1:0] AWBURST, // AXI PS Master GP1 AWBURST[1:0], output
input wire [3:0] AWQOS, // AXI PS Master GP1 AWQOS[3:0], output
// AXI PS Master GP1: Write Data
input wire [31:0] WDATA, // AXI PS Master GP1 WDATA[31:0], output
input wire WVALID, // AXI PS Master GP1 WVALID, output
output wire WREADY, // AXI PS Master GP1 WREADY, input
input wire [11:0] WID, // AXI PS Master GP1 WID[11:0], output
input wire WLAST, // AXI PS Master GP1 WLAST, output
input wire [3:0] WSTRB, // AXI PS Master GP1 WSTRB[3:0], output
// AXI PS Master GP1: Write Responce
output wire BVALID, // AXI PS Master GP1 BVALID, input
input wire BREADY, // AXI PS Master GP1 BREADY, output
output wire [11:0] BID, // AXI PS Master GP1 BID[11:0], input
output wire [1:0] BRESP // AXI PS Master GP1 BRESP[1:0], input
);
// register set
//reg [31:0] mem [3:0];
reg [32*4 - 1:0] mem;
// read
// simple consecutive non-conveyor
reg raval;
reg [31:0] raddr;
reg [3:0] rlen;
reg [1:0] rsize;
reg [1:0] rburst;
reg rready;
wire r_set;
wire r_clr;
wire [31:0] rdata_w;
reg [31:0] rdata;
reg rval;
reg [11:0] rid;
reg [11:0] rid_in;
reg [3:0] burst_cnt;
reg [31:0] raddr_burst;
assign ARREADY = rready;
assign RDATA = rdata;
assign RVALID = rval;
assign RID = rid;
assign RLAST = burst_cnt == rlen;
assign RRESP = 2'b00;
// recieve controls
always @ (posedge ACLK)
begin
raddr <= ARVALID ? ARADDR : raddr;
raval <= ARVALID;
rlen <= ARLEN;
rsize <= ARSIZE;
rburst <= ARBURST;
rid_in <= RID;
end
// determine successful address detection and data delivery
assign r_set = raval & ARREADY | r_clr & ~RLAST;
assign r_clr = RVALID & RREADY;
// drive output signals after address detection until they are delivered
always @ (posedge ACLK)
begin
rdata <= {32{r_set}} & rdata_w | rdata & {32{~r_clr & ARESETN}};
rid <= {12{r_set}} & rid_in | rid & {12{~r_clr & ARESETN}};
rval <= r_set | rval & ~r_clr & ARESETN;
end
// we are ready to proceed another address after we've completely done with previous one:
// the moment last burst is sent and everytime after that
always @ (posedge ACLK)
rready <= ~|burst_cnt & (RLAST & r_clr | ~rval) & ARESETN;
// count bursts
always @ (posedge ACLK)
burst_cnt <= ~ARESETN | RLAST & r_clr ? 4'h0 : r_clr ? burst_cnt + 1'b1 : burst_cnt;
// after simplifying the introduction comment for this particular case
assign rdata_w = mem[{|burst_cnt ? raddr_burst[5:2] : raddr[5:2], 2'b00} + 7-:8];
// compute an address for the next burst
wire ralmost_last;
assign ralmost_last = burst_cnt + 1'b1 == rlen;
always @ (posedge ACLK)
raddr_burst <= ~ARESETN ? 32'h0 : ~r_clr ? raddr_burst : rburst == 2'b01 ? {raddr_burst[5:2] + 1'b1, 2'b00} : // incr
rburst == 2'b10 ? (~ralmost_last ? {raddr_burst[5:2] + 1'b1, 2'b00 } : // wrap, ordinary case
{raddr[5:2], 2'b00}) : // wrap, last transaction is to be 'wrapped'
raddr; // fixed
// write
// simple consecutive non-conveyor
reg [31:0] waddr;
reg waval;
reg [11:0] wid_in;
reg [3:0] wlen;
reg [1:0] wsize;
reg [1:0] wburst;
reg [31:0] wdata;
reg wval;
reg [11:0] wid;
reg [3:0] wstrb;
reg waunready;
reg wready;
reg wlast;
wire w_set;
wire w_clr;
reg [31:0] waddr_burst;
reg [3:0] wburst_cnt;
reg wait_resp;
wire wresp_clr;
assign WREADY = wready;
assign AWREADY = ~waunready & ~wait_resp;
// latching inputs
always @ (posedge ACLK)
begin
waddr <= AWVALID ? AWADDR : waddr;
waval <= AWVALID;
wid_in <= AWID;
wlen <= AWLEN;
wsize <= AWSIZE;
wburst <= AWBURST;
wdata <= WDATA;
wlast <= WLAST;
wid <= WID;
wstrb <= AWVALID ? WSTRB : wstrb;
wval <= WVALID;
end
// determine start and end of 'transmit data' phase
assign w_set = waval & AWREADY | w_clr & ~wlast;
assign w_clr = WVALID & WREADY;
// as soon as data phase started, data could be recieved every tick and no control could
always @ (posedge ACLK)
begin
wait_resp <= w_set | wait_resp & ~wresp_clr & ARESETN;
waunready <= w_set | waunready & ~w_clr & ARESETN;
wready <= w_set | wready & ~w_clr & ARESETN;
end
// write data to a corresponding memory cell
wire waddr_cur;
assign waddr_cur = {|wburst_cnt ? waddr_burst[5:2] : waddr[5:2], 2'b00};
genvar ii;
generate
for (ii = 0; ii < 4; ii = ii + 1)
begin: for_every_word_byte
always @ (posedge ACLK)
begin
mem[waddr_cur + ii*8 + 7-:8] <= w_clr & wstrb[ii] ? wdata[ii*8+7-:8] : mem[waddr_cur + ii*8 + 7-:8];
end
end
endgenerate
wire walmost_last;
assign walmost_last = wburst_cnt + 1'b1 == wlen;
always @ (posedge ACLK)
wburst_cnt <= ~ARESETN | wlast & w_clr ? 4'h0 : w_clr ? wburst_cnt + 1'b1 : wburst_cnt;
always @ (posedge ACLK)
waddr_burst <= ~ARESETN ? 32'h0 : ~w_clr ? waddr_burst : wburst == 2'b01 ? {waddr_burst[5:2] + 1'b1, 2'b00} : //incr
wburst == 2'b10 ? (~walmost_last ? {waddr_burst[5:2] + 1'b1, 2'b00} : // wrap, ordinary
{waddr[5:2], 2'b00}) : // wrap, last burst
waddr; // fixed
// set responses
reg bready;
reg [11:0] bid;
always @ (posedge ACLK)
begin
bid <= AWVALID ? WID : bid;
bready <= ~ARESETN | wresp_clr ? 1'b0 : wlast & w_clr ? 1'b1 : bready;
end
assign BRESP = 2'b00;
assign BID = bid;
assign BREADY = bready;
assign wresp_clr = BREADY & BVALID;
endmodule
top.v 0 → 100644
View file @ 09f004b7
/*******************************************************************************
* Module: top
* Date: 2015-07-11
* Author: Alexey
* Description: top-level module, instantiates PS7 + sata host controller
*
* Copyright (c) 2015 Elphel, Inc.
* top.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* top.v file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
module top(
);
PS7 ps7_i (
// EMIO interface
// CAN interface
.EMIOCAN0PHYTX(), // CAN 0 TX, output
.EMIOCAN0PHYRX(), // CAN 0 RX, input
.EMIOCAN1PHYTX(), // Can 1 TX, output
.EMIOCAN1PHYRX(), // CAN 1 RX, input
// GMII 0
.EMIOENET0GMIICRS(), // GMII 0 Carrier sense, input
.EMIOENET0GMIICOL(), // GMII 0 Collision detect, input
.EMIOENET0EXTINTIN(), // GMII 0 Controller Interrupt input, input
// GMII 0 TX signals
.EMIOENET0GMIITXCLK(), // GMII 0 TX clock, input
.EMIOENET0GMIITXD(), // GMII 0 Tx Data[7:0], output
.EMIOENET0GMIITXEN(), // GMII 0 Tx En, output
.EMIOENET0GMIITXER(), // GMII 0 Tx Err, output
// GMII 0 TX timestamp signals
.EMIOENET0SOFTX(), // GMII 0 Tx Tx Start-of-Frame, output
.EMIOENET0PTPDELAYREQTX(), // GMII 0 Tx PTP delay req frame detected, output
.EMIOENET0PTPPDELAYREQTX(), // GMII 0 Tx PTP peer delay frame detect, output
.EMIOENET0PTPPDELAYRESPTX(), // GMII 0 Tx PTP pear delay response frame detected, output
.EMIOENET0PTPSYNCFRAMETX(), // GMII 0 Tx PTP sync frame detected, output
// GMII 0 RX signals
.EMIOENET0GMIIRXCLK(), // GMII 0 Rx Clock, input
.EMIOENET0GMIIRXD(), // GMII 0 Rx Data (7:0), input
.EMIOENET0GMIIRXDV(), // GMII 0 Rx Data valid, input
.EMIOENET0GMIIRXER(), // GMII 0 Rx Error, input
// GMII 0 RX timestamp signals
.EMIOENET0SOFRX(), // GMII 0 Rx Start of Frame, output
.EMIOENET0PTPDELAYREQRX(), // GMII 0 Rx PTP delay req frame detected
.EMIOENET0PTPPDELAYREQRX(), // GMII 0 Rx PTP peer delay frame detected, output
.EMIOENET0PTPPDELAYRESPRX(), // GMII 0 Rx PTP peer delay responce frame detected, output
.EMIOENET0PTPSYNCFRAMERX(), // GMII 0 Rx PTP sync frame detected, output
// MDIO 0
.EMIOENET0MDIOMDC(), // MDIO 0 MD clock output, output
.EMIOENET0MDIOO(), // MDIO 0 MD data output, output
.EMIOENET0MDIOTN(), // MDIO 0 MD data 3-state, output
.EMIOENET0MDIOI(), // MDIO 0 MD data input, input
// GMII 1
.EMIOENET1GMIICRS(), // GMII 1 Carrier sense, input
.EMIOENET1GMIICOL(), // GMII 1 Collision detect, input
.EMIOENET1EXTINTIN(), // GMII 1 Controller Interrupt input, input
// GMII 1 TX signals
.EMIOENET1GMIITXCLK(), // GMII 1 TX clock, input
.EMIOENET1GMIITXD(), // GMII 1 Tx Data[7:0], output
.EMIOENET1GMIITXEN(), // GMII 1 Tx En, output
.EMIOENET1GMIITXER(), // GMII 1 Tx Err, output
// GMII 1 TX timestamp signals
.EMIOENET1SOFTX(), // GMII 1 Tx Tx Start-of-Frame, output
.EMIOENET1PTPDELAYREQTX(), // GMII 1 Tx PTP delay req frame detected, output
.EMIOENET1PTPPDELAYREQTX(), // GMII 1 Tx PTP peer delay frame detect, output
.EMIOENET1PTPPDELAYRESPTX(), // GMII 1 Tx PTP pear delay response frame detected, output
.EMIOENET1PTPSYNCFRAMETX(), // GMII 1 Tx PTP sync frame detected, output
// GMII 1 RX signals
.EMIOENET1GMIIRXCLK(), // GMII 1 Rx Clock, input
.EMIOENET1GMIIRXD(), // GMII 1 Rx Data (7:0), input
.EMIOENET1GMIIRXDV(), // GMII 1 Rx Data valid, input
.EMIOENET1GMIIRXER(), // GMII 1 Rx Error, input
// GMII 1 RX timestamp signals
.EMIOENET1SOFRX(), // GMII 1 Rx Start of Frame, output
.EMIOENET1PTPDELAYREQRX(), // GMII 1 Rx PTP delay req frame detected
.EMIOENET1PTPPDELAYREQRX(), // GMII 1 Rx PTP peer delay frame detected, output
.EMIOENET1PTPPDELAYRESPRX(), // GMII 1 Rx PTP peer delay responce frame detected, output
.EMIOENET1PTPSYNCFRAMERX(), // GMII 1 Rx PTP sync frame detected, output
// MDIO 1
.EMIOENET1MDIOMDC(), // MDIO 1 MD clock output, output
.EMIOENET1MDIOO(), // MDIO 1 MD data output, output
.EMIOENET1MDIOTN(), // MDIO 1 MD data 3-state, output
.EMIOENET1MDIOI(), // MDIO 1 MD data input, input
// EMIO GPIO
.EMIOGPIOO(), // EMIO GPIO Data out[63:0], output
.EMIOGPIOI(gpio_in[63:0]), // EMIO GPIO Data in[63:0], input
.EMIOGPIOTN(), // EMIO GPIO OutputEnable[63:0], output
// EMIO I2C 0
.EMIOI2C0SCLO(), // I2C 0 SCL OUT, output // manual says input
.EMIOI2C0SCLI(), // I2C 0 SCL IN, input // manual says output
.EMIOI2C0SCLTN(), // I2C 0 SCL EN, output // manual says input
.EMIOI2C0SDAO(), // I2C 0 SDA OUT, output // manual says input
.EMIOI2C0SDAI(), // I2C 0 SDA IN, input // manual says output
.EMIOI2C0SDATN(), // I2C 0 SDA EN, output // manual says input
// EMIO I2C 1
.EMIOI2C1SCLO(), // I2C 1 SCL OUT, output // manual says input
.EMIOI2C1SCLI(), // I2C 1 SCL IN, input // manual says output
.EMIOI2C1SCLTN(), // I2C 1 SCL EN, output // manual says input
.EMIOI2C1SDAO(), // I2C 1 SDA OUT, output // manual says input
.EMIOI2C1SDAI(), // I2C 1 SDA IN, input // manual says output
.EMIOI2C1SDATN(), // I2C 1 SDA EN, output // manual says input
// JTAG
.EMIOPJTAGTCK(), // JTAG TCK, input
.EMIOPJTAGTMS(), // JTAG TMS, input
.EMIOPJTAGTDI(), // JTAG TDI, input
.EMIOPJTAGTDO(), // JTAG TDO, output
.EMIOPJTAGTDTN(), // JTAG TDO OE, output
// SDIO 0
.EMIOSDIO0CLKFB(), // SDIO 0 Clock feedback, input
.EMIOSDIO0CLK(), // SDIO 0 Clock, output
.EMIOSDIO0CMDI(), // SDIO 0 Command in, input
.EMIOSDIO0CMDO(), // SDIO 0 Command out, output
.EMIOSDIO0CMDTN(), // SDIO 0 command OE, output
.EMIOSDIO0DATAI(), // SDIO 0 Data in [3:0], input
.EMIOSDIO0DATAO(), // SDIO 0 Data out [3:0], output
.EMIOSDIO0DATATN(), // SDIO 0 Data OE [3:0], output
.EMIOSDIO0CDN(), // SDIO 0 Card detect, input
.EMIOSDIO0WP(), // SDIO 0 Write protect, input
.EMIOSDIO0BUSPOW(), // SDIO 0 Power control, output
.EMIOSDIO0LED(), // SDIO 0 LED control, output
.EMIOSDIO0BUSVOLT(), // SDIO 0 Bus voltage [2:0], output
// SDIO 1
.EMIOSDIO1CLKFB(), // SDIO 1 Clock feedback, input
.EMIOSDIO1CLK(), // SDIO 1 Clock, output
.EMIOSDIO1CMDI(), // SDIO 1 Command in, input
.EMIOSDIO1CMDO(), // SDIO 1 Command out, output
.EMIOSDIO1CMDTN(), // SDIO 1 command OE, output
.EMIOSDIO1DATAI(), // SDIO 1 Data in [3:0], input
.EMIOSDIO1DATAO(), // SDIO 1 Data out [3:0], output
.EMIOSDIO1DATATN(), // SDIO 1 Data OE [3:0], output
.EMIOSDIO1CDN(), // SDIO 1 Card detect, input
.EMIOSDIO1WP(), // SDIO 1 Write protect, input
.EMIOSDIO1BUSPOW(), // SDIO 1 Power control, output
.EMIOSDIO1LED(), // SDIO 1 LED control, output
.EMIOSDIO1BUSVOLT(), // SDIO 1 Bus voltage [2:0], output
// SPI 0
.EMIOSPI0SCLKI(), // SPI 0 CLK in , input
.EMIOSPI0SCLKO(), // SPI 0 CLK out, output
.EMIOSPI0SCLKTN(), // SPI 0 CLK OE, output
.EMIOSPI0SI(), // SPI 0 MOSI in , input
.EMIOSPI0MO(), // SPI 0 MOSI out , output
.EMIOSPI0MOTN(), // SPI 0 MOSI OE, output
.EMIOSPI0MI(), // SPI 0 MISO in, input
.EMIOSPI0SO(), // SPI 0 MISO out, output
.EMIOSPI0STN(), // SPI 0 MISO OE, output
.EMIOSPI0SSIN(), // SPI 0 Slave select 0 in, input
.EMIOSPI0SSON(), // SPI 0 Slave select [2:0] out, output
.EMIOSPI0SSNTN(), // SPI 0 Slave select OE, output
// SPI 1
.EMIOSPI1SCLKI(), // SPI 1 CLK in , input
.EMIOSPI1SCLKO(), // SPI 1 CLK out, output
.EMIOSPI1SCLKTN(), // SPI 1 CLK OE, output
.EMIOSPI1SI(), // SPI 1 MOSI in , input
.EMIOSPI1MO(), // SPI 1 MOSI out , output
.EMIOSPI1MOTN(), // SPI 1 MOSI OE, output
.EMIOSPI1MI(), // SPI 1 MISO in, input
.EMIOSPI1SO(), // SPI 1 MISO out, output
.EMIOSPI1STN(), // SPI 1 MISO OE, output
.EMIOSPI1SSIN(), // SPI 1 Slave select 0 in, input
.EMIOSPI1SSON(), // SPI 1 Slave select [2:0] out, output
.EMIOSPI1SSNTN(), // SPI 1 Slave select OE, output
// TPIU signals (Trace)
.EMIOTRACECTL(), // Trace CTL, output
.EMIOTRACEDATA(), // Trace Data[31:0], output
.EMIOTRACECLK(), // Trace CLK, input
// Timers/counters
.EMIOTTC0CLKI(), // Counter/Timer 0 clock in [2:0], input
.EMIOTTC0WAVEO(), // Counter/Timer 0 wave out[2:0], output
.EMIOTTC1CLKI(), // Counter/Timer 1 clock in [2:0], input
.EMIOTTC1WAVEO(), // Counter/Timer 1 wave out[2:0], output
//UART 0
.EMIOUART0TX(), // UART 0 Transmit, output
.EMIOUART0RX(), // UART 0 Receive, input
.EMIOUART0CTSN(), // UART 0 Clear To Send, input
.EMIOUART0RTSN(), // UART 0 Ready to Send, output
.EMIOUART0DSRN(), // UART 0 Data Set Ready , input
.EMIOUART0DCDN(), // UART 0 Data Carrier Detect, input
.EMIOUART0RIN(), // UART 0 Ring Indicator, input
.EMIOUART0DTRN(), // UART 0 Data Terminal Ready, output
//UART 1
.EMIOUART1TX(), // UART 1 Transmit, output
.EMIOUART1RX(), // UART 1 Receive, input
.EMIOUART1CTSN(), // UART 1 Clear To Send, input
.EMIOUART1RTSN(), // UART 1 Ready to Send, output
.EMIOUART1DSRN(), // UART 1 Data Set Ready , input
.EMIOUART1DCDN(), // UART 1 Data Carrier Detect, input
.EMIOUART1RIN(), // UART 1 Ring Indicator, input
.EMIOUART1DTRN(), // UART 1 Data Terminal Ready, output
// USB 0
.EMIOUSB0PORTINDCTL(), // USB 0 Port Indicator [1:0], output
.EMIOUSB0VBUSPWRFAULT(), // USB 0 Power Fault, input
.EMIOUSB0VBUSPWRSELECT(), // USB 0 Power Select, output
// USB 1
.EMIOUSB1PORTINDCTL(), // USB 1 Port Indicator [1:0], output
.EMIOUSB1VBUSPWRFAULT(), // USB 1 Power Fault, input
.EMIOUSB1VBUSPWRSELECT(), // USB 1 Power Select, output
// Watchdog Timer
.EMIOWDTCLKI(), // Watchdog Timer Clock in, input
.EMIOWDTRSTO(), // Watchdog Timer Reset out, output
// DMAC 0
.DMA0ACLK(), // DMAC 0 Clock, input
.DMA0DRVALID(), // DMAC 0 DMA Request Valid, input
.DMA0DRLAST(), // DMAC 0 DMA Request Last, input
.DMA0DRTYPE(), // DMAC 0 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
.DMA0DRREADY(), // DMAC 0 DMA Request Ready, output
.DMA0DAVALID(), // DMAC 0 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
.DMA0DAREADY(), // DMAC 0 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
.DMA0DATYPE(), // DMAC 0 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
.DMA0RSTN(), // DMAC 0 RESET output (reserved, do not use), output
// DMAC 1
.DMA1ACLK(), // DMAC 1 Clock, input
.DMA1DRVALID(), // DMAC 1 DMA Request Valid, input
.DMA1DRLAST(), // DMAC 1 DMA Request Last, input
.DMA1DRTYPE(), // DMAC 1 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
.DMA1DRREADY(), // DMAC 1 DMA Request Ready, output
.DMA1DAVALID(), // DMAC 1 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
.DMA1DAREADY(), // DMAC 1 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
.DMA1DATYPE(), // DMAC 1 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
.DMA1RSTN(), // DMAC 1 RESET output (reserved, do not use), output
// DMAC 2
.DMA2ACLK(), // DMAC 2 Clock, input
.DMA2DRVALID(), // DMAC 2 DMA Request Valid, input
.DMA2DRLAST(), // DMAC 2 DMA Request Last, input
.DMA2DRTYPE(), // DMAC 2 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
.DMA2DRREADY(), // DMAC 2 DMA Request Ready, output
.DMA2DAVALID(), // DMAC 2 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
.DMA2DAREADY(), // DMAC 2 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
.DMA2DATYPE(), // DMAC 2 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
.DMA2RSTN(), // DMAC 2 RESET output (reserved, do not use), output
// DMAC 3
.DMA3ACLK(), // DMAC 3 Clock, input
.DMA3DRVALID(), // DMAC 3 DMA Request Valid, input
.DMA3DRLAST(), // DMAC 3 DMA Request Last, input
.DMA3DRTYPE(), // DMAC 3 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
.DMA3DRREADY(), // DMAC 3 DMA Request Ready, output
.DMA3DAVALID(), // DMAC 3 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
.DMA3DAREADY(), // DMAC 3 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
.DMA3DATYPE(), // DMAC 3 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
.DMA3RSTN(), // DMAC 3 RESET output (reserved, do not use), output
// Interrupt signals
.IRQF2P(), // Interrupts, OL to PS [19:0], input
.IRQP2F(), // Interrupts, OL to PS [28:0], output
// Event Signals
.EVENTEVENTI(), // EVENT Wake up one or both CPU from WFE state, input
.EVENTEVENTO(), // EVENT Asserted when one of the COUs executed SEV instruction, output
.EVENTSTANDBYWFE(), // EVENT CPU standby mode [1:0], asserted when CPU is waiting for an event, output
.EVENTSTANDBYWFI(), // EVENT CPU standby mode [1:0], asserted when CPU is waiting for an interrupt, output
// PL Resets and clocks
.FCLKCLK(fclk[3:0]), // PL Clocks [3:0], output
.FCLKCLKTRIGN(), // PL Clock Throttle Control [3:0], input
.FCLKRESETN(frst[3:0]), // PL General purpose user reset [3:0], output (active low)
// Debug signals
.FTMTP2FDEBUG(), // Debug General purpose debug output [31:0], output
.FTMTF2PDEBUG(), // Debug General purpose debug input [31:0], input
.FTMTP2FTRIG(), // Debug Trigger PS to PL [3:0], output
.FTMTP2FTRIGACK(), // Debug Trigger PS to PL acknowledge[3:0], input
.FTMTF2PTRIG(), // Debug Trigger PL to PS [3:0], input
.FTMTF2PTRIGACK(), // Debug Trigger PL to PS acknowledge[3:0], output
.FTMDTRACEINCLOCK(), // Debug Trace PL to PS Clock, input
.FTMDTRACEINVALID(), // Debug Trace PL to PS Clock, data&id valid, input
.FTMDTRACEINDATA(), // Debug Trace PL to PS data [31:0], input
.FTMDTRACEINATID(), // Debug Trace PL to PS ID [3:0], input
// DDR Urgent
.DDRARB(), // DDR Urgent[3:0], input
// SRAM interrupt (on rising edge)
.EMIOSRAMINTIN(), // SRAM interrupt #50 shared with NAND busy, input
// AXI interfaces
.FPGAIDLEN(1'b1), //Idle PL AXI interfaces (active low), input
// AXI PS Master GP0
// AXI PS Master GP0: Clock, Reset
.MAXIGP0ACLK(/*axi_aclk*/), // AXI PS Master GP0 Clock , input
// .MAXIGP0ACLK(/*fclk[0]*/), // AXI PS Master GP0 Clock , input
// .MAXIGP0ACLK(/*~fclk[0]*/), // AXI PS Master GP0 Clock , input
// .MAXIGP0ACLK(/*axi_naclk*/), // AXI PS Master GP0 Clock , input
//
.MAXIGP0ARESETN(), // AXI PS Master GP0 Reset, output
// AXI PS Master GP0: Read Address
.MAXIGP0ARADDR (/*axi_araddr[31:0]*/), // AXI PS Master GP0 ARADDR[31:0], output
.MAXIGP0ARVALID (/*axi_arvalid*/), // AXI PS Master GP0 ARVALID, output
.MAXIGP0ARREADY (/*axi_arready*/), // AXI PS Master GP0 ARREADY, input
.MAXIGP0ARID (/*axi_arid[11:0]*/), // AXI PS Master GP0 ARID[11:0], output
.MAXIGP0ARLOCK (), // AXI PS Master GP0 ARLOCK[1:0], output
.MAXIGP0ARCACHE (),// AXI PS Master GP0 ARCACHE[3:0], output
.MAXIGP0ARPROT(), // AXI PS Master GP0 ARPROT[2:0], output
.MAXIGP0ARLEN (/*axi_arlen[3:0]*/), // AXI PS Master GP0 ARLEN[3:0], output
.MAXIGP0ARSIZE (/*axi_arsize[1:0]*/), // AXI PS Master GP0 ARSIZE[1:0], output
.MAXIGP0ARBURST (/*axi_arburst[1:0]*/),// AXI PS Master GP0 ARBURST[1:0], output
.MAXIGP0ARQOS (), // AXI PS Master GP0 ARQOS[3:0], output
// AXI PS Master GP0: Read Data
.MAXIGP0RDATA (/*axi_rdata[31:0]*/), // AXI PS Master GP0 RDATA[31:0], input
.MAXIGP0RVALID (/*axi_rvalid*/), // AXI PS Master GP0 RVALID, input
.MAXIGP0RREADY (/*axi_rready*/), // AXI PS Master GP0 RREADY, output
.MAXIGP0RID (/*axi_rid[11:0]*/), // AXI PS Master GP0 RID[11:0], input
.MAXIGP0RLAST (/*axi_rlast*/), // AXI PS Master GP0 RLAST, input
.MAXIGP0RRESP (/*axi_rresp[1:0]*/), // AXI PS Master GP0 RRESP[1:0], input
// AXI PS Master GP0: Write Address
.MAXIGP0AWADDR (/*axi_awaddr[31:0]*/), // AXI PS Master GP0 AWADDR[31:0], output
.MAXIGP0AWVALID (/*axi_awvalid*/), // AXI PS Master GP0 AWVALID, output
.MAXIGP0AWREADY (/*axi_awready*/), // AXI PS Master GP0 AWREADY, input
.MAXIGP0AWID (/*axi_awid[11:0]*/), // AXI PS Master GP0 AWID[11:0], output
.MAXIGP0AWLOCK (), // AXI PS Master GP0 AWLOCK[1:0], output
.MAXIGP0AWCACHE (),// AXI PS Master GP0 AWCACHE[3:0], output
.MAXIGP0AWPROT (), // AXI PS Master GP0 AWPROT[2:0], output
.MAXIGP0AWLEN (/*axi_awlen[3:0]*/), // AXI PS Master GP0 AWLEN[3:0], output
.MAXIGP0AWSIZE (/*axi_awsize[1:0]*/), // AXI PS Master GP0 AWSIZE[1:0], output
.MAXIGP0AWBURST (/*axi_awburst[1:0]*/),// AXI PS Master GP0 AWBURST[1:0], output
.MAXIGP0AWQOS (), // AXI PS Master GP0 AWQOS[3:0], output
// AXI PS Master GP0: Write Data
.MAXIGP0WDATA (/*axi_wdata[31:0]*/), // AXI PS Master GP0 WDATA[31:0], output
.MAXIGP0WVALID (/*axi_wvalid*/), // AXI PS Master GP0 WVALID, output
.MAXIGP0WREADY (/*axi_wready*/), // AXI PS Master GP0 WREADY, input
.MAXIGP0WID (/*axi_wid[11:0]*/), // AXI PS Master GP0 WID[11:0], output
.MAXIGP0WLAST (/*axi_wlast*/), // AXI PS Master GP0 WLAST, output
.MAXIGP0WSTRB (/*axi_wstb[3:0]*/), // AXI PS Master GP0 WSTRB[3:0], output
// AXI PS Master GP0: Write Responce
.MAXIGP0BVALID (/*axi_bvalid*/), // AXI PS Master GP0 BVALID, input
.MAXIGP0BREADY (/*axi_bready*/), // AXI PS Master GP0 BREADY, output
.MAXIGP0BID (/*axi_bid[11:0]*/), // AXI PS Master GP0 BID[11:0], input
.MAXIGP0BRESP (/*axi_bresp[1:0]*/), // AXI PS Master GP0 BRESP[1:0], input
// AXI PS Master GP1
// AXI PS Master GP1: Clock, Reset
.MAXIGP1ACLK(), // AXI PS Master GP1 Clock , input
.MAXIGP1ARESETN(), // AXI PS Master GP1 Reset, output
// AXI PS Master GP1: Read Address
.MAXIGP1ARADDR(), // AXI PS Master GP1 ARADDR[31:0], output
.MAXIGP1ARVALID(), // AXI PS Master GP1 ARVALID, output
.MAXIGP1ARREADY(), // AXI PS Master GP1 ARREADY, input
.MAXIGP1ARID(), // AXI PS Master GP1 ARID[11:0], output
.MAXIGP1ARLOCK(), // AXI PS Master GP1 ARLOCK[1:0], output
.MAXIGP1ARCACHE(), // AXI PS Master GP1 ARCACHE[3:0], output
.MAXIGP1ARPROT(), // AXI PS Master GP1 ARPROT[2:0], output
.MAXIGP1ARLEN(), // AXI PS Master GP1 ARLEN[3:0], output
.MAXIGP1ARSIZE(), // AXI PS Master GP1 ARSIZE[1:0], output
.MAXIGP1ARBURST(), // AXI PS Master GP1 ARBURST[1:0], output
.MAXIGP1ARQOS(), // AXI PS Master GP1 ARQOS[3:0], output
// AXI PS Master GP1: Read Data
.MAXIGP1RDATA(), // AXI PS Master GP1 RDATA[31:0], input
.MAXIGP1RVALID(), // AXI PS Master GP1 RVALID, input
.MAXIGP1RREADY(), // AXI PS Master GP1 RREADY, output
.MAXIGP1RID(), // AXI PS Master GP1 RID[11:0], input
.MAXIGP1RLAST(), // AXI PS Master GP1 RLAST, input
.MAXIGP1RRESP(), // AXI PS Master GP1 RRESP[1:0], input
// AXI PS Master GP1: Write Address
.MAXIGP1AWADDR(), // AXI PS Master GP1 AWADDR[31:0], output
.MAXIGP1AWVALID(), // AXI PS Master GP1 AWVALID, output
.MAXIGP1AWREADY(), // AXI PS Master GP1 AWREADY, input
.MAXIGP1AWID(), // AXI PS Master GP1 AWID[11:0], output
.MAXIGP1AWLOCK(), // AXI PS Master GP1 AWLOCK[1:0], output
.MAXIGP1AWCACHE(), // AXI PS Master GP1 AWCACHE[3:0], output
.MAXIGP1AWPROT(), // AXI PS Master GP1 AWPROT[2:0], output
.MAXIGP1AWLEN(), // AXI PS Master GP1 AWLEN[3:0], output
.MAXIGP1AWSIZE(), // AXI PS Master GP1 AWSIZE[1:0], output
.MAXIGP1AWBURST(), // AXI PS Master GP1 AWBURST[1:0], output
.MAXIGP1AWQOS(), // AXI PS Master GP1 AWQOS[3:0], output
// AXI PS Master GP1: Write Data
.MAXIGP1WDATA(), // AXI PS Master GP1 WDATA[31:0], output
.MAXIGP1WVALID(), // AXI PS Master GP1 WVALID, output
.MAXIGP1WREADY(), // AXI PS Master GP1 WREADY, input
.MAXIGP1WID(), // AXI PS Master GP1 WID[11:0], output
.MAXIGP1WLAST(), // AXI PS Master GP1 WLAST, output
.MAXIGP1WSTRB(), // AXI PS Master GP1 WSTRB[3:0], output
// AXI PS Master GP1: Write Responce
.MAXIGP1BVALID(), // AXI PS Master GP1 BVALID, input
.MAXIGP1BREADY(), // AXI PS Master GP1 BREADY, output
.MAXIGP1BID(), // AXI PS Master GP1 BID[11:0], input
.MAXIGP1BRESP(), // AXI PS Master GP1 BRESP[1:0], input
// AXI PS Slave GP0
// AXI PS Slave GP0: Clock, Reset
.SAXIGP0ACLK(), // AXI PS Slave GP0 Clock , input
.SAXIGP0ARESETN(), // AXI PS Slave GP0 Reset, output
// AXI PS Slave GP0: Read Address
.SAXIGP0ARADDR(), // AXI PS Slave GP0 ARADDR[31:0], input
.SAXIGP0ARVALID(), // AXI PS Slave GP0 ARVALID, input
.SAXIGP0ARREADY(), // AXI PS Slave GP0 ARREADY, output
.SAXIGP0ARID(), // AXI PS Slave GP0 ARID[5:0], input
.SAXIGP0ARLOCK(), // AXI PS Slave GP0 ARLOCK[1:0], input
.SAXIGP0ARCACHE(), // AXI PS Slave GP0 ARCACHE[3:0], input
.SAXIGP0ARPROT(), // AXI PS Slave GP0 ARPROT[2:0], input
.SAXIGP0ARLEN(), // AXI PS Slave GP0 ARLEN[3:0], input
.SAXIGP0ARSIZE(), // AXI PS Slave GP0 ARSIZE[1:0], input
.SAXIGP0ARBURST(), // AXI PS Slave GP0 ARBURST[1:0], input
.SAXIGP0ARQOS(), // AXI PS Slave GP0 ARQOS[3:0], input
// AXI PS Slave GP0: Read Data
.SAXIGP0RDATA(), // AXI PS Slave GP0 RDATA[31:0], output
.SAXIGP0RVALID(), // AXI PS Slave GP0 RVALID, output
.SAXIGP0RREADY(), // AXI PS Slave GP0 RREADY, input
.SAXIGP0RID(), // AXI PS Slave GP0 RID[5:0], output
.SAXIGP0RLAST(), // AXI PS Slave GP0 RLAST, output
.SAXIGP0RRESP(), // AXI PS Slave GP0 RRESP[1:0], output
// AXI PS Slave GP0: Write Address
.SAXIGP0AWADDR(), // AXI PS Slave GP0 AWADDR[31:0], input
.SAXIGP0AWVALID(), // AXI PS Slave GP0 AWVALID, input
.SAXIGP0AWREADY(), // AXI PS Slave GP0 AWREADY, output
.SAXIGP0AWID(), // AXI PS Slave GP0 AWID[5:0], input
.SAXIGP0AWLOCK(), // AXI PS Slave GP0 AWLOCK[1:0], input
.SAXIGP0AWCACHE(), // AXI PS Slave GP0 AWCACHE[3:0], input
.SAXIGP0AWPROT(), // AXI PS Slave GP0 AWPROT[2:0], input
.SAXIGP0AWLEN(), // AXI PS Slave GP0 AWLEN[3:0], input
.SAXIGP0AWSIZE(), // AXI PS Slave GP0 AWSIZE[1:0], input
.SAXIGP0AWBURST(), // AXI PS Slave GP0 AWBURST[1:0], input
.SAXIGP0AWQOS(), // AXI PS Slave GP0 AWQOS[3:0], input
// AXI PS Slave GP0: Write Data
.SAXIGP0WDATA(), // AXI PS Slave GP0 WDATA[31:0], input
.SAXIGP0WVALID(), // AXI PS Slave GP0 WVALID, input
.SAXIGP0WREADY(), // AXI PS Slave GP0 WREADY, output
.SAXIGP0WID(), // AXI PS Slave GP0 WID[5:0], input
.SAXIGP0WLAST(), // AXI PS Slave GP0 WLAST, input
.SAXIGP0WSTRB(), // AXI PS Slave GP0 WSTRB[3:0], input
// AXI PS Slave GP0: Write Responce
.SAXIGP0BVALID(), // AXI PS Slave GP0 BVALID, output
.SAXIGP0BREADY(), // AXI PS Slave GP0 BREADY, input
.SAXIGP0BID(), // AXI PS Slave GP0 BID[5:0], output //TODO: Update range !!!
.SAXIGP0BRESP(), // AXI PS Slave GP0 BRESP[1:0], output
// AXI PS Slave GP1
// AXI PS Slave GP1: Clock, Reset
.SAXIGP1ACLK(), // AXI PS Slave GP1 Clock , input
.SAXIGP1ARESETN(), // AXI PS Slave GP1 Reset, output
// AXI PS Slave GP1: Read Address
.SAXIGP1ARADDR(), // AXI PS Slave GP1 ARADDR[31:0], input
.SAXIGP1ARVALID(), // AXI PS Slave GP1 ARVALID, input
.SAXIGP1ARREADY(), // AXI PS Slave GP1 ARREADY, output
.SAXIGP1ARID(), // AXI PS Slave GP1 ARID[5:0], input
.SAXIGP1ARLOCK(), // AXI PS Slave GP1 ARLOCK[1:0], input
.SAXIGP1ARCACHE(), // AXI PS Slave GP1 ARCACHE[3:0], input
.SAXIGP1ARPROT(), // AXI PS Slave GP1 ARPROT[2:0], input
.SAXIGP1ARLEN(), // AXI PS Slave GP1 ARLEN[3:0], input
.SAXIGP1ARSIZE(), // AXI PS Slave GP1 ARSIZE[1:0], input
.SAXIGP1ARBURST(), // AXI PS Slave GP1 ARBURST[1:0], input
.SAXIGP1ARQOS(), // AXI PS Slave GP1 ARQOS[3:0], input
// AXI PS Slave GP1: Read Data
.SAXIGP1RDATA(), // AXI PS Slave GP1 RDATA[31:0], output
.SAXIGP1RVALID(), // AXI PS Slave GP1 RVALID, output
.SAXIGP1RREADY(), // AXI PS Slave GP1 RREADY, input
.SAXIGP1RID(), // AXI PS Slave GP1 RID[5:0], output
.SAXIGP1RLAST(), // AXI PS Slave GP1 RLAST, output
.SAXIGP1RRESP(), // AXI PS Slave GP1 RRESP[1:0], output
// AXI PS Slave GP1: Write Address
.SAXIGP1AWADDR(), // AXI PS Slave GP1 AWADDR[31:0], input
.SAXIGP1AWVALID(), // AXI PS Slave GP1 AWVALID, input
.SAXIGP1AWREADY(), // AXI PS Slave GP1 AWREADY, output
.SAXIGP1AWID(), // AXI PS Slave GP1 AWID[5:0], input
.SAXIGP1AWLOCK(), // AXI PS Slave GP1 AWLOCK[1:0], input
.SAXIGP1AWCACHE(), // AXI PS Slave GP1 AWCACHE[3:0], input
.SAXIGP1AWPROT(), // AXI PS Slave GP1 AWPROT[2:0], input
.SAXIGP1AWLEN(), // AXI PS Slave GP1 AWLEN[3:0], input
.SAXIGP1AWSIZE(), // AXI PS Slave GP1 AWSIZE[1:0], input
.SAXIGP1AWBURST(), // AXI PS Slave GP1 AWBURST[1:0], input
.SAXIGP1AWQOS(), // AXI PS Slave GP1 AWQOS[3:0], input
// AXI PS Slave GP1: Write Data
.SAXIGP1WDATA(), // AXI PS Slave GP1 WDATA[31:0], input
.SAXIGP1WVALID(), // AXI PS Slave GP1 WVALID, input
.SAXIGP1WREADY(), // AXI PS Slave GP1 WREADY, output
.SAXIGP1WID(), // AXI PS Slave GP1 WID[5:0], input
.SAXIGP1WLAST(), // AXI PS Slave GP1 WLAST, input
.SAXIGP1WSTRB(), // AXI PS Slave GP1 WSTRB[3:0], input
// AXI PS Slave GP1: Write Responce
.SAXIGP1BVALID(), // AXI PS Slave GP1 BVALID, output
.SAXIGP1BREADY(), // AXI PS Slave GP1 BREADY, input
.SAXIGP1BID(), // AXI PS Slave GP1 BID[5:0], output
.SAXIGP1BRESP(), // AXI PS Slave GP1 BRESP[1:0], output
// AXI PS Slave HP0
// AXI PS Slave HP0: Clock, Reset
.SAXIHP0ACLK(), // AXI PS Slave HP0 Clock , input
.SAXIHP0ARESETN(), // AXI PS Slave HP0 Reset, output
// AXI PS Slave HP0: Read Address
.SAXIHP0ARADDR(), // AXI PS Slave HP0 ARADDR[31:0], input
.SAXIHP0ARVALID(), // AXI PS Slave HP0 ARVALID, input
.SAXIHP0ARREADY(), // AXI PS Slave HP0 ARREADY, output
.SAXIHP0ARID(), // AXI PS Slave HP0 ARID[5:0], input
.SAXIHP0ARLOCK(), // AXI PS Slave HP0 ARLOCK[1:0], input
.SAXIHP0ARCACHE(), // AXI PS Slave HP0 ARCACHE[3:0], input
.SAXIHP0ARPROT(), // AXI PS Slave HP0 ARPROT[2:0], input
.SAXIHP0ARLEN(), // AXI PS Slave HP0 ARLEN[3:0], input
.SAXIHP0ARSIZE(), // AXI PS Slave HP0 ARSIZE[2:0], input
.SAXIHP0ARBURST(), // AXI PS Slave HP0 ARBURST[1:0], input
.SAXIHP0ARQOS(), // AXI PS Slave HP0 ARQOS[3:0], input
// AXI PS Slave HP0: Read Data
.SAXIHP0RDATA(), // AXI PS Slave HP0 RDATA[63:0], output
.SAXIHP0RVALID(), // AXI PS Slave HP0 RVALID, output
.SAXIHP0RREADY(), // AXI PS Slave HP0 RREADY, input
.SAXIHP0RID(), // AXI PS Slave HP0 RID[5:0], output
.SAXIHP0RLAST(), // AXI PS Slave HP0 RLAST, output
.SAXIHP0RRESP(), // AXI PS Slave HP0 RRESP[1:0], output
.SAXIHP0RCOUNT(), // AXI PS Slave HP0 RCOUNT[7:0], output
.SAXIHP0RACOUNT(), // AXI PS Slave HP0 RACOUNT[2:0], output
.SAXIHP0RDISSUECAP1EN(), // AXI PS Slave HP0 RDISSUECAP1EN, input
// AXI PS Slave HP0: Write Address
.SAXIHP0AWADDR(), // AXI PS Slave HP0 AWADDR[31:0], input
.SAXIHP0AWVALID(), // AXI PS Slave HP0 AWVALID, input
.SAXIHP0AWREADY(), // AXI PS Slave HP0 AWREADY, output
.SAXIHP0AWID(), // AXI PS Slave HP0 AWID[5:0], input
.SAXIHP0AWLOCK(), // AXI PS Slave HP0 AWLOCK[1:0], input
.SAXIHP0AWCACHE(), // AXI PS Slave HP0 AWCACHE[3:0], input
.SAXIHP0AWPROT(), // AXI PS Slave HP0 AWPROT[2:0], input
.SAXIHP0AWLEN(), // AXI PS Slave HP0 AWLEN[3:0], input
.SAXIHP0AWSIZE(), // AXI PS Slave HP0 AWSIZE[1:0], input
.SAXIHP0AWBURST(), // AXI PS Slave HP0 AWBURST[1:0], input
.SAXIHP0AWQOS(), // AXI PS Slave HP0 AWQOS[3:0], input
// AXI PS Slave HP0: Write Data
.SAXIHP0WDATA(), // AXI PS Slave HP0 WDATA[63:0], input
.SAXIHP0WVALID(), // AXI PS Slave HP0 WVALID, input
.SAXIHP0WREADY(), // AXI PS Slave HP0 WREADY, output
.SAXIHP0WID(), // AXI PS Slave HP0 WID[5:0], input
.SAXIHP0WLAST(), // AXI PS Slave HP0 WLAST, input
.SAXIHP0WSTRB(), // AXI PS Slave HP0 WSTRB[7:0], input
.SAXIHP0WCOUNT(), // AXI PS Slave HP0 WCOUNT[7:0], output
.SAXIHP0WACOUNT(), // AXI PS Slave HP0 WACOUNT[5:0], output
.SAXIHP0WRISSUECAP1EN(), // AXI PS Slave HP0 WRISSUECAP1EN, input
// AXI PS Slave HP0: Write Responce
.SAXIHP0BVALID(), // AXI PS Slave HP0 BVALID, output
.SAXIHP0BREADY(), // AXI PS Slave HP0 BREADY, input
.SAXIHP0BID(), // AXI PS Slave HP0 BID[5:0], output
.SAXIHP0BRESP(), // AXI PS Slave HP0 BRESP[1:0], output
// AXI PS Slave HP1
// AXI PS Slave 1: Clock, Reset
.SAXIHP1ACLK(), // AXI PS Slave HP1 Clock , input
.SAXIHP1ARESETN(), // AXI PS Slave HP1 Reset, output
// AXI PS Slave HP1: Read Address
.SAXIHP1ARADDR(), // AXI PS Slave HP1 ARADDR[31:0], input
.SAXIHP1ARVALID(), // AXI PS Slave HP1 ARVALID, input
.SAXIHP1ARREADY(), // AXI PS Slave HP1 ARREADY, output
.SAXIHP1ARID(), // AXI PS Slave HP1 ARID[5:0], input
.SAXIHP1ARLOCK(), // AXI PS Slave HP1 ARLOCK[1:0], input
.SAXIHP1ARCACHE(), // AXI PS Slave HP1 ARCACHE[3:0], input
.SAXIHP1ARPROT(), // AXI PS Slave HP1 ARPROT[2:0], input
.SAXIHP1ARLEN(), // AXI PS Slave HP1 ARLEN[3:0], input
.SAXIHP1ARSIZE(), // AXI PS Slave HP1 ARSIZE[2:0], input
.SAXIHP1ARBURST(), // AXI PS Slave HP1 ARBURST[1:0], input
.SAXIHP1ARQOS(), // AXI PS Slave HP1 ARQOS[3:0], input
// AXI PS Slave HP1: Read Data
.SAXIHP1RDATA(), // AXI PS Slave HP1 RDATA[63:0], output
.SAXIHP1RVALID(), // AXI PS Slave HP1 RVALID, output
.SAXIHP1RREADY(), // AXI PS Slave HP1 RREADY, input
.SAXIHP1RID(), // AXI PS Slave HP1 RID[5:0], output
.SAXIHP1RLAST(), // AXI PS Slave HP1 RLAST, output
.SAXIHP1RRESP(), // AXI PS Slave HP1 RRESP[1:0], output
.SAXIHP1RCOUNT(), // AXI PS Slave HP1 RCOUNT[7:0], output
.SAXIHP1RACOUNT(), // AXI PS Slave HP1 RACOUNT[2:0], output
.SAXIHP1RDISSUECAP1EN(), // AXI PS Slave HP1 RDISSUECAP1EN, input
// AXI PS Slave HP1: Write Address
.SAXIHP1AWADDR(), // AXI PS Slave HP1 AWADDR[31:0], input
.SAXIHP1AWVALID(), // AXI PS Slave HP1 AWVALID, input
.SAXIHP1AWREADY(), // AXI PS Slave HP1 AWREADY, output
.SAXIHP1AWID(), // AXI PS Slave HP1 AWID[5:0], input
.SAXIHP1AWLOCK(), // AXI PS Slave HP1 AWLOCK[1:0], input
.SAXIHP1AWCACHE(), // AXI PS Slave HP1 AWCACHE[3:0], input
.SAXIHP1AWPROT(), // AXI PS Slave HP1 AWPROT[2:0], input
.SAXIHP1AWLEN(), // AXI PS Slave HP1 AWLEN[3:0], input
.SAXIHP1AWSIZE(), // AXI PS Slave HP1 AWSIZE[1:0], input
.SAXIHP1AWBURST(), // AXI PS Slave HP1 AWBURST[1:0], input
.SAXIHP1AWQOS(), // AXI PS Slave HP1 AWQOS[3:0], input
// AXI PS Slave HP1: Write Data
.SAXIHP1WDATA(), // AXI PS Slave HP1 WDATA[63:0], input
.SAXIHP1WVALID(), // AXI PS Slave HP1 WVALID, input
.SAXIHP1WREADY(), // AXI PS Slave HP1 WREADY, output
.SAXIHP1WID(), // AXI PS Slave HP1 WID[5:0], input
.SAXIHP1WLAST(), // AXI PS Slave HP1 WLAST, input
.SAXIHP1WSTRB(), // AXI PS Slave HP1 WSTRB[7:0], input
.SAXIHP1WCOUNT(), // AXI PS Slave HP1 WCOUNT[7:0], output
.SAXIHP1WACOUNT(), // AXI PS Slave HP1 WACOUNT[5:0], output
.SAXIHP1WRISSUECAP1EN(), // AXI PS Slave HP1 WRISSUECAP1EN, input
// AXI PS Slave HP1: Write Responce
.SAXIHP1BVALID(), // AXI PS Slave HP1 BVALID, output
.SAXIHP1BREADY(), // AXI PS Slave HP1 BREADY, input
.SAXIHP1BID(), // AXI PS Slave HP1 BID[5:0], output
.SAXIHP1BRESP(), // AXI PS Slave HP1 BRESP[1:0], output
// AXI PS Slave HP2
// AXI PS Slave HP2: Clock, Reset
.SAXIHP2ACLK(), // AXI PS Slave HP2 Clock , input
.SAXIHP2ARESETN(), // AXI PS Slave HP2 Reset, output
// AXI PS Slave HP2: Read Address
.SAXIHP2ARADDR(), // AXI PS Slave HP2 ARADDR[31:0], input
.SAXIHP2ARVALID(), // AXI PS Slave HP2 ARVALID, input
.SAXIHP2ARREADY(), // AXI PS Slave HP2 ARREADY, output
.SAXIHP2ARID(), // AXI PS Slave HP2 ARID[5:0], input
.SAXIHP2ARLOCK(), // AXI PS Slave HP2 ARLOCK[1:0], input
.SAXIHP2ARCACHE(), // AXI PS Slave HP2 ARCACHE[3:0], input
.SAXIHP2ARPROT(), // AXI PS Slave HP2 ARPROT[2:0], input
.SAXIHP2ARLEN(), // AXI PS Slave HP2 ARLEN[3:0], input
.SAXIHP2ARSIZE(), // AXI PS Slave HP2 ARSIZE[2:0], input
.SAXIHP2ARBURST(), // AXI PS Slave HP2 ARBURST[1:0], input
.SAXIHP2ARQOS(), // AXI PS Slave HP2 ARQOS[3:0], input
// AXI PS Slave HP2: Read Data
.SAXIHP2RDATA(), // AXI PS Slave HP2 RDATA[63:0], output
.SAXIHP2RVALID(), // AXI PS Slave HP2 RVALID, output
.SAXIHP2RREADY(), // AXI PS Slave HP2 RREADY, input
.SAXIHP2RID(), // AXI PS Slave HP2 RID[5:0], output
.SAXIHP2RLAST(), // AXI PS Slave HP2 RLAST, output
.SAXIHP2RRESP(), // AXI PS Slave HP2 RRESP[1:0], output
.SAXIHP2RCOUNT(), // AXI PS Slave HP2 RCOUNT[7:0], output
.SAXIHP2RACOUNT(), // AXI PS Slave HP2 RACOUNT[2:0], output
.SAXIHP2RDISSUECAP1EN(), // AXI PS Slave HP2 RDISSUECAP1EN, input
// AXI PS Slave HP2: Write Address
.SAXIHP2AWADDR(), // AXI PS Slave HP2 AWADDR[31:0], input
.SAXIHP2AWVALID(), // AXI PS Slave HP2 AWVALID, input
.SAXIHP2AWREADY(), // AXI PS Slave HP2 AWREADY, output
.SAXIHP2AWID(), // AXI PS Slave HP2 AWID[5:0], input
.SAXIHP2AWLOCK(), // AXI PS Slave HP2 AWLOCK[1:0], input
.SAXIHP2AWCACHE(), // AXI PS Slave HP2 AWCACHE[3:0], input
.SAXIHP2AWPROT(), // AXI PS Slave HP2 AWPROT[2:0], input
.SAXIHP2AWLEN(), // AXI PS Slave HP2 AWLEN[3:0], input
.SAXIHP2AWSIZE(), // AXI PS Slave HP2 AWSIZE[1:0], input
.SAXIHP2AWBURST(), // AXI PS Slave HP2 AWBURST[1:0], input
.SAXIHP2AWQOS(), // AXI PS Slave HP2 AWQOS[3:0], input
// AXI PS Slave HP2: Write Data
.SAXIHP2WDATA(), // AXI PS Slave HP2 WDATA[63:0], input
.SAXIHP2WVALID(), // AXI PS Slave HP2 WVALID, input
.SAXIHP2WREADY(), // AXI PS Slave HP2 WREADY, output
.SAXIHP2WID(), // AXI PS Slave HP2 WID[5:0], input
.SAXIHP2WLAST(), // AXI PS Slave HP2 WLAST, input
.SAXIHP2WSTRB(), // AXI PS Slave HP2 WSTRB[7:0], input
.SAXIHP2WCOUNT(), // AXI PS Slave HP2 WCOUNT[7:0], output
.SAXIHP2WACOUNT(), // AXI PS Slave HP2 WACOUNT[5:0], output
.SAXIHP2WRISSUECAP1EN(), // AXI PS Slave HP2 WRISSUECAP1EN, input
// AXI PS Slave HP2: Write Responce
.SAXIHP2BVALID(), // AXI PS Slave HP2 BVALID, output
.SAXIHP2BREADY(), // AXI PS Slave HP2 BREADY, input
.SAXIHP2BID(), // AXI PS Slave HP2 BID[5:0], output
.SAXIHP2BRESP(), // AXI PS Slave HP2 BRESP[1:0], output
// AXI PS Slave HP3
// AXI PS Slave HP3: Clock, Reset
.SAXIHP3ACLK(), // AXI PS Slave HP3 Clock , input
.SAXIHP3ARESETN(), // AXI PS Slave HP3 Reset, output
// AXI PS Slave HP3: Read Address
.SAXIHP3ARADDR(), // AXI PS Slave HP3 ARADDR[31:0], input
.SAXIHP3ARVALID(), // AXI PS Slave HP3 ARVALID, input
.SAXIHP3ARREADY(), // AXI PS Slave HP3 ARREADY, output
.SAXIHP3ARID(), // AXI PS Slave HP3 ARID[5:0], input
.SAXIHP3ARLOCK(), // AXI PS Slave HP3 ARLOCK[1:0], input
.SAXIHP3ARCACHE(), // AXI PS Slave HP3 ARCACHE[3:0], input
.SAXIHP3ARPROT(), // AXI PS Slave HP3 ARPROT[2:0], input
.SAXIHP3ARLEN(), // AXI PS Slave HP3 ARLEN[3:0], input
.SAXIHP3ARSIZE(), // AXI PS Slave HP3 ARSIZE[2:0], input
.SAXIHP3ARBURST(), // AXI PS Slave HP3 ARBURST[1:0], input
.SAXIHP3ARQOS(), // AXI PS Slave HP3 ARQOS[3:0], input
// AXI PS Slave HP3: Read Data
.SAXIHP3RDATA(), // AXI PS Slave HP3 RDATA[63:0], output
.SAXIHP3RVALID(), // AXI PS Slave HP3 RVALID, output
.SAXIHP3RREADY(), // AXI PS Slave HP3 RREADY, input
.SAXIHP3RID(), // AXI PS Slave HP3 RID[5:0], output
.SAXIHP3RLAST(), // AXI PS Slave HP3 RLAST, output
.SAXIHP3RRESP(), // AXI PS Slave HP3 RRESP[1:0], output
.SAXIHP3RCOUNT(), // AXI PS Slave HP3 RCOUNT[7:0], output
.SAXIHP3RACOUNT(), // AXI PS Slave HP3 RACOUNT[2:0], output
.SAXIHP3RDISSUECAP1EN(), // AXI PS Slave HP3 RDISSUECAP1EN, input
// AXI PS Slave HP3: Write Address
.SAXIHP3AWADDR(), // AXI PS Slave HP3 AWADDR[31:0], input
.SAXIHP3AWVALID(), // AXI PS Slave HP3 AWVALID, input
.SAXIHP3AWREADY(), // AXI PS Slave HP3 AWREADY, output
.SAXIHP3AWID(), // AXI PS Slave HP3 AWID[5:0], input
.SAXIHP3AWLOCK(), // AXI PS Slave HP3 AWLOCK[1:0], input
.SAXIHP3AWCACHE(), // AXI PS Slave HP3 AWCACHE[3:0], input
.SAXIHP3AWPROT(), // AXI PS Slave HP3 AWPROT[2:0], input
.SAXIHP3AWLEN(), // AXI PS Slave HP3 AWLEN[3:0], input
.SAXIHP3AWSIZE(), // AXI PS Slave HP3 AWSIZE[1:0], input
.SAXIHP3AWBURST(), // AXI PS Slave HP3 AWBURST[1:0], input
.SAXIHP3AWQOS(), // AXI PS Slave HP3 AWQOS[3:0], input
// AXI PS Slave HP3: Write Data
.SAXIHP3WDATA(), // AXI PS Slave HP3 WDATA[63:0], input
.SAXIHP3WVALID(), // AXI PS Slave HP3 WVALID, input
.SAXIHP3WREADY(), // AXI PS Slave HP3 WREADY, output
.SAXIHP3WID(), // AXI PS Slave HP3 WID[5:0], input
.SAXIHP3WLAST(), // AXI PS Slave HP3 WLAST, input
.SAXIHP3WSTRB(), // AXI PS Slave HP3 WSTRB[7:0], input
.SAXIHP3WCOUNT(), // AXI PS Slave HP3 WCOUNT[7:0], output
.SAXIHP3WACOUNT(), // AXI PS Slave HP3 WACOUNT[5:0], output
.SAXIHP3WRISSUECAP1EN(), // AXI PS Slave HP3 WRISSUECAP1EN, input
// AXI PS Slave HP3: Write Responce
.SAXIHP3BVALID(), // AXI PS Slave HP3 BVALID, output
.SAXIHP3BREADY(), // AXI PS Slave HP3 BREADY, input
.SAXIHP3BID(), // AXI PS Slave HP3 BID[5:0], output
.SAXIHP3BRESP(), // AXI PS Slave HP3 BRESP[1:0], output
// AXI PS Slave ACP
// AXI PS Slave ACP: Clock, Reset
.SAXIACPACLK(), // AXI PS Slave ACP Clock, input
.SAXIACPARESETN(), // AXI PS Slave ACP Reset, output
// AXI PS Slave ACP: Read Address
.SAXIACPARADDR(), // AXI PS Slave ACP ARADDR[31:0], input
.SAXIACPARVALID(), // AXI PS Slave ACP ARVALID, input
.SAXIACPARREADY(), // AXI PS Slave ACP ARREADY, output
.SAXIACPARID(), // AXI PS Slave ACP ARID[2:0], input
.SAXIACPARLOCK(), // AXI PS Slave ACP ARLOCK[1:0], input
.SAXIACPARCACHE(), // AXI PS Slave ACP ARCACHE[3:0], input
.SAXIACPARPROT(), // AXI PS Slave ACP ARPROT[2:0], input
.SAXIACPARLEN(), // AXI PS Slave ACP ARLEN[3:0], input
.SAXIACPARSIZE(), // AXI PS Slave ACP ARSIZE[2:0], input
.SAXIACPARBURST(), // AXI PS Slave ACP ARBURST[1:0], input
.SAXIACPARQOS(), // AXI PS Slave ACP ARQOS[3:0], input
.SAXIACPARUSER(), // AXI PS Slave ACP ARUSER[4:0], input
// AXI PS Slave ACP: Read Data
.SAXIACPRDATA(), // AXI PS Slave ACP RDATA[63:0], output
.SAXIACPRVALID(), // AXI PS Slave ACP RVALID, output
.SAXIACPRREADY(), // AXI PS Slave ACP RREADY, input
.SAXIACPRID(), // AXI PS Slave ACP RID[2:0], output
.SAXIACPRLAST(), // AXI PS Slave ACP RLAST, output
.SAXIACPRRESP(), // AXI PS Slave ACP RRESP[1:0], output
// AXI PS Slave ACP: Write Address
.SAXIACPAWADDR(), // AXI PS Slave ACP AWADDR[31:0], input
.SAXIACPAWVALID(), // AXI PS Slave ACP AWVALID, input
.SAXIACPAWREADY(), // AXI PS Slave ACP AWREADY, output
.SAXIACPAWID(), // AXI PS Slave ACP AWID[2:0], input
.SAXIACPAWLOCK(), // AXI PS Slave ACP AWLOCK[1:0], input
.SAXIACPAWCACHE(), // AXI PS Slave ACP AWCACHE[3:0], input
.SAXIACPAWPROT(), // AXI PS Slave ACP AWPROT[2:0], input
.SAXIACPAWLEN(), // AXI PS Slave ACP AWLEN[3:0], input
.SAXIACPAWSIZE(), // AXI PS Slave ACP AWSIZE[1:0], input
.SAXIACPAWBURST(), // AXI PS Slave ACP AWBURST[1:0], input
.SAXIACPAWQOS(), // AXI PS Slave ACP AWQOS[3:0], input
.SAXIACPAWUSER(), // AXI PS Slave ACP AWUSER[4:0], input
// AXI PS Slave ACP: Write Data
.SAXIACPWDATA(), // AXI PS Slave ACP WDATA[63:0], input
.SAXIACPWVALID(), // AXI PS Slave ACP WVALID, input
.SAXIACPWREADY(), // AXI PS Slave ACP WREADY, output
.SAXIACPWID(), // AXI PS Slave ACP WID[2:0], input
.SAXIACPWLAST(), // AXI PS Slave ACP WLAST, input
.SAXIACPWSTRB(), // AXI PS Slave ACP WSTRB[7:0], input
// AXI PS Slave ACP: Write Responce
.SAXIACPBVALID(), // AXI PS Slave ACP BVALID, output
.SAXIACPBREADY(), // AXI PS Slave ACP BREADY, input
.SAXIACPBID(), // AXI PS Slave ACP BID[2:0], output
.SAXIACPBRESP(), // AXI PS Slave ACP BRESP[1:0], output
// Direct connection to PS package pads
.DDRA(), // PS DDRA[14:0], inout
.DDRBA(), // PS DDRBA[2:0], inout
.DDRCASB(), // PS DDRCASB, inout
.DDRCKE(), // PS DDRCKE, inout
.DDRCKP(), // PS DDRCKP, inout
.DDRCKN(), // PS DDRCKN, inout
.DDRCSB(), // PS DDRCSB, inout
.DDRDM(), // PS DDRDM[3:0], inout
.DDRDQ(), // PS DDRDQ[31:0], inout
.DDRDQSP(), // PS DDRDQSP[3:0], inout
.DDRDQSN(), // PS DDRDQSN[3:0], inout
.DDRDRSTB(), // PS DDRDRSTB, inout
.DDRODT(), // PS DDRODT, inout
.DDRRASB(), // PS DDRRASB, inout
.DDRVRN(), // PS DDRVRN, inout
.DDRVRP(), // PS DDRVRP, inout
.DDRWEB(), // PS DDRWEB, inout
.MIO(), // PS MIO[53:0], inout // clg225 has less
.PSCLK(), // PS PSCLK, inout
.PSPORB(), // PS PSPORB, inout
.PSSRSTB() // PS PSSRSTB, inout
);
endmodule
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment