/*******************************************************************************
 * Module: timestamp_to_parallel
 * Date:2015-07-04  
 * Author: andrey     
 * Description: convert byte-parallel timestamp message to parallel sec, usec
 * compatible to the x353 code (for NC353 camera)
 *
 * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
 * timestamp_to_parallel.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 *  timestamp_to_parallel.v is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *******************************************************************************/
`timescale 1ns/1ps

module  timestamp_to_parallel(
    input                clk, // clock that drives time counters
    input                pre_stb, // just before receiving sequence of 7 bytes
    input          [7:0] tdata,   // byte-parallel timestamp data
    output reg    [31:0] sec,     // time seconds
    output reg    [19:0] usec,    // time microseconds
    output               done     // got serial timetamp message, output is valid (1-cycle pulse)
);
    reg [6:0] seq;
    assign done = seq[6];
    always @ (posedge clk) begin
        seq <= {seq[5:0],pre_stb};
        if (seq[0])  sec[ 7: 0] <= tdata;
        if (seq[1])  sec[15: 8] <= tdata;
        if (seq[2])  sec[23:16] <= tdata;
        if (seq[3])  sec[31:24] <= tdata;
        if (seq[4]) usec[ 7: 0] <= tdata;
        if (seq[5]) usec[15: 8] <= tdata;
        if (seq[6]) usec[19:16] <= tdata[3:0];
    end
endmodule