/******************************************************************************* * Module: ramt_var_w_var_r * Date:2015-05-29 * Author: andrey * Description: Dual port memory wrapper, with variable width write and variable * width read, using "TDP" mode of RAMB36E1. Same R/W widths in each port. * Does not use parity bits to increase total data width, width down to 1 are valid. * * Copyright (c) 2015 Elphel, Inc. * ramt_var_w_var_r.v is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * ramt_var_w_var_r.v is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . *******************************************************************************/ `timescale 1ns/1ps /* Address/data widths Connect unused data to 1b0, unused addresses - to 1'b1 RAMB18E1 in True Dual Port (TDP) Mode - each port individually +-----------+---------+---------+---------+ |Data Width | Address | Data | Parity | +-----------+---------+---------+---------+ | 1 | A[13:0] | D[0] | --- | | 2 | A[13:1] | D[1:0] | --- | | 4 | A[13:2] | D[3:0[ | --- | | 9 | A[13:3] | D[7:0] | DP[0] | | 18 | A[13:4] | D[15:0] | DP[1:0] | +-----------+---------+---------+---------+ RAMB18E1 in Simple Dual Port (SDP) Mode one of the ports (r or w) - 32/36 bits, other - variable +------------+---------+---------+---------+ |Data Widths | Address | Data | Parity | +------------+---------+---------+---------+ | 32/ 1 | A[13:0] | D[0] | --- | | 32/ 2 | A[13:1] | D[1:0] | --- | | 32/ 4 | A[13:2] | D[3:0[ | --- | | 36/ 9 | A[13:3] | D[7:0] | DP[0] | | 36/ 18 | A[13:4] | D[15:0] | DP[1:0] | | 36/ 36 | A[13:5] | D[31:0] | DP[3:0] | +------------+---------+---------+---------+ RAMB36E1 in True Dual Port (TDP) Mode - each port individually +-----------+---------+---------+---------+ |Data Width | Address | Data | Parity | +-----------+---------+---------+---------+ | 1 | A[14:0] | D[0] | --- | | 2 | A[14:1] | D[1:0] | --- | | 4 | A[14:2] | D[3:0[ | --- | | 9 | A[14:3] | D[7:0] | DP[0] | | 18 | A[14:4] | D[15:0] | DP[1:0] | | 36 | A[14:5] | D[31:0] | DP[3:0] | |1(Cascade) | A[15:0] | D[0] | --- | +-----------+---------+---------+---------+ RAMB36E1 in Simple Dual Port (SDP) Mode one of the ports (r or w) - 64/72 bits, other - variable +------------+---------+---------+---------+ |Data Widths | Address | Data | Parity | +------------+---------+---------+---------+ | 64/ 1 | A[14:0] | D[0] | --- | | 64/ 2 | A[14:1] | D[1:0] | --- | | 64/ 4 | A[14:2] | D[3:0[ | --- | | 64/ 9 | A[14:3] | D[7:0] | DP[0] | | 64/ 18 | A[14:4] | D[15:0] | DP[1:0] | | 64/ 36 | A[14:5] | D[31:0] | DP[3:0] | | 64/ 72 | A[14:6] | D[63:0] | DP[7:0] | +------------+---------+---------+---------+ */ module ramt_var_w_var_r #( parameter integer REGISTERS_A = 0, // 1 - registered output parameter integer REGISTERS_B = 0, // 1 - registered output parameter integer LOG2WIDTH_A = 5, // WIDTH= 9 << (LOG2WIDTH - 3) parameter integer LOG2WIDTH_B = 5, // WIDTH= 9 << (LOG2WIDTH - 3) parameter WRITE_MODE_A = "NO_CHANGE", //Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE" parameter WRITE_MODE_B = "NO_CHANGE" //Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE" )( input clk_a, // clock for port A input [14-LOG2WIDTH_A:0] addr_a, // address port A input en_a, // enable port A (read and write) input regen_a, // output register enable port A input we_a, // write port enable port A output [(1 << LOG2WIDTH_A)-1:0] data_out_a,// data out port A input [(1 << LOG2WIDTH_A)-1:0] data_in_a, // data in port A input clk_b, // clock for port BA input [14-LOG2WIDTH_B:0] addr_b, // address port B input en_b, // read enable port B input regen_b, // output register enable port B input we_b, // write port enable port B output [(1 << LOG2WIDTH_B)-1:0] data_out_b,// data out port B input [(1 << LOG2WIDTH_B)-1:0] data_in_b // data in port B ); localparam PWIDTH_A = (LOG2WIDTH_A > 2)? (9 << (LOG2WIDTH_A - 3)): (1 << LOG2WIDTH_A); localparam PWIDTH_B = (LOG2WIDTH_B > 2)? (9 << (LOG2WIDTH_B - 3)): (1 << LOG2WIDTH_B); localparam WIDTH_A = 1 << LOG2WIDTH_A; localparam WIDTH_B = 1 << LOG2WIDTH_B; wire [31:0] data_out32_a; assign data_out_a=data_out32_a[WIDTH_A-1:0]; wire [31:0] data_out32_b; assign data_out_b=data_out32_b[WIDTH_B-1:0]; wire [WIDTH_A+31:0] data_in_ext_a = {32'b0,data_in_a[WIDTH_A-1:0]}; wire [31:0] data_in32_a = data_in_ext_a[31:0]; wire [WIDTH_B+31:0] data_in_ext_b = {32'b0,data_in_b[WIDTH_B-1:0]}; wire [31:0] data_in32_b = data_in_ext_b[31:0]; RAMB36E1 #( .RSTREG_PRIORITY_A ("RSTREG"), // Valid: "RSTREG" or "REGCE" .RSTREG_PRIORITY_B ("RSTREG"), // Valid: "RSTREG" or "REGCE" .DOA_REG (REGISTERS_A), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 36) .DOB_REG (REGISTERS_B), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 36) .RAM_EXTENSION_A ("NONE"), // Cascading, valid: "NONE","UPPER", LOWER" .RAM_EXTENSION_B ("NONE"), // Cascading, valid: "NONE","UPPER", LOWER" .READ_WIDTH_A (PWIDTH_A), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used) .READ_WIDTH_B (PWIDTH_B), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used) .WRITE_WIDTH_A (PWIDTH_A), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used) .WRITE_WIDTH_B (PWIDTH_B), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used) .RAM_MODE ("TDP"), // Valid "TDP" (true dual-port) and "SDP" - simple dual-port .WRITE_MODE_A (WRITE_MODE_A), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE" .WRITE_MODE_B (WRITE_MODE_B), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE" .RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page) .SIM_COLLISION_CHECK ("ALL"), // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY" .INIT_FILE ("NONE"), // "NONE" or filename with initialization data .SIM_DEVICE ("7SERIES"), // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES" .EN_ECC_READ ("FALSE"), // Valid:"FALSE","TRUE" (ECC decoder circuitry) .EN_ECC_WRITE ("FALSE") // Valid:"FALSE","TRUE" (ECC decoder circuitry) // .INIT_A(36'h0), // Output latches initialization data // .INIT_B(36'h0), // Output latches initialization data // .SRVAL_A(36'h0), // Output latches initialization data (copied at when RSTRAM/RSTREG activated) // .SRVAL_B(36'h0) // Output latches initialization data (copied at when RSTRAM/RSTREG activated) /* parameter IS_CLKARDCLK_INVERTED = 1'b0; parameter IS_CLKBWRCLK_INVERTED = 1'b0; parameter IS_ENARDEN_INVERTED = 1'b0; parameter IS_ENBWREN_INVERTED = 1'b0; parameter IS_RSTRAMARSTRAM_INVERTED = 1'b0; parameter IS_RSTRAMB_INVERTED = 1'b0; parameter IS_RSTREGARSTREG_INVERTED = 1'b0; parameter IS_RSTREGB_INVERTED = 1'b0; */ ) RAMB36E1_i ( // Port A (Read port in SDP mode): .DOADO (data_out32_a), // Port A data/LSB data[31:0], output .DOPADOP (), // Port A parity/LSB parity[3:0], output .DIADI (data_in32_a), // Port A data/LSB data[31:0], input .DIPADIP (4'b0), // Port A parity/LSB parity[3:0], input .ADDRARDADDR ({1'b1,addr_a,{LOG2WIDTH_A{1'b1}}}), // Port A (read port in SDP) address [15:0]. used from [14] down, unused should be high, input .CLKARDCLK (clk_a), // Port A (read port in SDP) clock, input .ENARDEN (en_a), // Port A (read port in SDP) Enable, input .REGCEAREGCE (regen_a), // Port A (read port in SDP) register enable, input .RSTRAMARSTRAM (1'b0), // Port A (read port in SDP) set/reset, input .RSTREGARSTREG (1'b0), // Port A (read port in SDP) register set/reset, input .WEA ({4{we_a}}), // Port A (read port in SDP) Write Enable[3:0], input // Port B .DOBDO (data_out32_b), // Port B data/MSB data[31:0], output .DOPBDOP (), // Port B parity/MSB parity[3:0], output .DIBDI (data_in32_b), // Port B data/MSB data[31:0], input .DIPBDIP (4'b0), // Port B parity/MSB parity[3:0], input .ADDRBWRADDR ({1'b1,addr_b,{LOG2WIDTH_B{1'b1}}}), // Port B (write port in SDP) address [15:0]. used from [14] down, unused should be high, input .CLKBWRCLK (clk_b), // Port B (write port in SDP) clock, input .ENBWREN (en_b), // Port B (write port in SDP) Enable, input .REGCEB (regen_b), // Port B (write port in SDP) register enable, input .RSTRAMB (1'b0), // Port B (write port in SDP) set/reset, input .RSTREGB (1'b0), // Port B (write port in SDP) register set/reset, input .WEBWE ({4'b0,{4{we_b}}}),// Port B (write port in SDP) Write Enable[7:0], input // Error correction circuitry .SBITERR (), // Single bit error status, output .DBITERR (), // Double bit error status, output .ECCPARITY (), // Genearted error correction parity [7:0], output .RDADDRECC (), // ECC read address[8:0], output .INJECTSBITERR (1'b0), // inject a single-bit error, input .INJECTDBITERR (1'b0), // inject a double-bit error, input // Cascade signals to create 64Kx1 .CASCADEOUTA (), // A-port cascade, output .CASCADEOUTB (), // B-port cascade, output .CASCADEINA (1'b0), // A-port cascade, input .CASCADEINB (1'b0) // B-port cascade, input ); endmodule