/*******************************************************************************
 * File: x393_tasks_mcntrl_en_dis_priority.vh
 * Date:2015-02-07  
 * Author: Andrey Filippov     
 * Description: Simulation tasks for software reading/writing (with test patterns)
 * of the block buffers.
 *
 * Copyright (c) 2015 Elphel, Inc.
 * x393_tasks_mcntrl_en_dis_priority.vh is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * x393_tasks_mcntrl_en_dis_priority.vh is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *
 * Additional permission under GNU GPL version 3 section 7:
 * If you modify this Program, or any covered work, by linking or combining it
 * with independent modules provided by the FPGA vendor only (this permission
 * does not extend to any 3-rd party modules, "soft cores" or macros) under
 * different license terms solely for the purpose of generating binary "bitstream"
 * files and/or simulating the code, the copyright holders of this Program give
 * you the right to distribute the covered work without those independent modules
 * as long as the source code for them is available from the FPGA vendor free of
 * charge, and there is no dependence on any encrypted modules for simulating of
 * the combined code. This permission applies to you if the distributed code
 * contains all the components and scripts required to completely simulate it
 * with at least one of the Free Software programs.
 *******************************************************************************/
task enable_cmda;
   input en;
   begin
        write_contol_register(MCONTR_PHY_0BIT_ADDR +  MCONTR_PHY_0BIT_CMDA_EN + en, 0);
   end
endtask

task enable_cke;
    input en;
    begin
        write_contol_register(MCONTR_PHY_0BIT_ADDR +  MCONTR_PHY_0BIT_CKE_EN + en, 0);
    end
endtask

task activate_sdrst;
    input en;
    begin
        write_contol_register(MCONTR_PHY_0BIT_ADDR +  MCONTR_PHY_0BIT_SDRST_ACT + en, 0);
    end
endtask

task enable_refresh;
    input en;
    begin
        write_contol_register(MCONTR_TOP_0BIT_ADDR +  MCONTR_TOP_0BIT_REFRESH_EN + en, 0);
    end
endtask

task enable_memcntrl;
    input en;
    begin
        write_contol_register(MCONTR_TOP_0BIT_ADDR +  MCONTR_TOP_0BIT_MCONTR_EN + en, 0);
    end
endtask

task enable_memcntrl_channels;
    input [15:0] chnen; // bit-per-channel, 1 - enable;
    begin
        ENABLED_CHANNELS = chnen; // currently enabled memory channels
        write_contol_register(MCONTR_TOP_16BIT_ADDR +  MCONTR_TOP_16BIT_CHN_EN, {16'b0,chnen});
    end
endtask

task enable_memcntrl_en_dis;
    input [3:0] chn;
    input       en;
    begin
        if (en) begin
            ENABLED_CHANNELS = ENABLED_CHANNELS | (1<<chn);
        end else begin
            ENABLED_CHANNELS = ENABLED_CHANNELS & ~(1<<chn);
        end
        write_contol_register(MCONTR_TOP_16BIT_ADDR +  MCONTR_TOP_16BIT_CHN_EN, {16'b0,ENABLED_CHANNELS});
    end
endtask


task configure_channel_priority;
    input [ 3:0] chn;
    input [15:0] priority; // (higher is more important)
    begin
        write_contol_register(MCONTR_ARBIT_ADDR + chn, {16'b0,priority});
    end
endtask