Fixed teplate error in the headers

axi/cmprs_afi_mux.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Writes comressor data from up to 4 channels to system memory over AXI_HP
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_afi_mux.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

axi/cmprs_afi_mux_ptr.v

@@ -5,7 +5,7 @@
  * Description: Maintain 4-channel chunk pointers (before AXI)
  * Advance 32-byte chunk pointers for each AXI burst and each frame (4*2=8 pointers)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_afi_mux_ptr.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

axi/cmprs_afi_mux_ptr_wresp.v

@@ -5,7 +5,7 @@
  * Description: Maintain 4-channel chunk pointers for wrirte response
  * Advance 32-byte chunk pointers for each AXI burst and each frame (4*2=8 pointers)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_afi_mux_ptr_wresp.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

axi/cmprs_afi_mux_status.v

@@ -8,7 +8,7 @@
  * and the same for the write response channel (confirmed written to the system
  * memory
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_afi_mux_status.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

axi/membridge.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: bi-directional bridge between system and video memory over axi_hp
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * membridge.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

axi_hp_clk.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Generate global clock for axi_hp
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * axi_hp_clk.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

cmd_mux.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Command multiplexer between AXI and frame-based command sequencer
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_mux.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

cmd_readback.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Store control register data and readback
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_readback.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_buf_average.v

@@ -6,7 +6,7 @@
  * during write, then subtracts them during read and provides to
  * the after DCT to restore DC
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_buf_average.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_cmd_decode.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Decode compressor command/modes, reclock some signals
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_cmd_decode.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_frame_sync.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Synchronizes memory channels (sensor and compressor)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_frame_sync.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_macroblock_buf_iface.v

@@ -6,7 +6,7 @@
  * stream matching selected color mode, accommodates for the buffer latency,
  * acts as a pacemaker for the whole compressor (next stages are able to keep up).
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_macroblock_buf_iface.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_out_fifo.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Compressor output FIFO
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_out_fifo.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_pixel_buf_iface.v

@@ -6,7 +6,7 @@
  * stream matching selected color mode, accommodates for the buffer latency,
  * acts as a pacemaker for the whole compressor (next stages are able to keep up).
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_pixel_buf_iface.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_status.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Generate compressor status word
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_status.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_tile_mode2_decode.v

@@ -5,7 +5,7 @@
  * Description: Decode mode parameters, registered at pre-start of the macroblock
  * data to color conversion module
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_tile_mode2_decode.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/cmprs_tile_mode_decode.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Decode tile/macroblocks parameters from compressor type
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmprs_tile_mode_decode.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/color_proc393.v

@@ -5,7 +5,7 @@
  * Description: Color processor for JPEG 4:2:0/JP4
  * Updating from the earlier 2002-2010 version
  *
- * Copyright (c) 2002-2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2002-2015 Elphel, Inc.
  * color_proc393.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/csconvert.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Color space convert: combine differnt color modes
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * csconvert.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/csconvert_jp4.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Color conversion for JP4 mode
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * csconvert_jp4.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/csconvert_jp4diff.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Color conversion for JP4 differential
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * csconvert_jp4diff.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/csconvert_mono.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Convert JPEG monochrome
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * csconvert_mono.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/dcc_sync393.v

@@ -6,7 +6,7 @@
  * Syncronizes dcc data with dma1 output, adds 16..31 16-bit zero words for Axis DMA
  * Was not used in late NC353 camera (DMA channel used fro IMU logger)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * dcc_sync393.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

compressor_jp/jp_channel.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Top module of JPEG/JP4 compressor channel
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * jp_channel.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_cur_params_target.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Memory controller parameters that need adjustment during training
  * Target ,pde
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_cur_params_target.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_localparams.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Local parameters for simulation of the x393
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_localparams.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_mcontr_encode_cmd.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Functions used to encode memory controller sequences
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_mcontr_encode_cmd.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_parameters.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Parameters for the x393 (simulation and implementation)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_parameters.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_simulation_parameters.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Simulation-specific parameters for the x393
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_simulation_parameters.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks01.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Simulation tasks for the x393 (low level)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_tasks01.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks_afi.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Simulation tasks for the AXI_HP (AFI)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_tasks_afi.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks_mcntrl_buffers.vh

@@ -5,7 +5,7 @@
  * Description: Simulation tasks for software reading/writing (with test patterns)
  * of the block buffers.
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_tasks_mcntrl_buffers.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks_mcntrl_en_dis_priority.vh

@@ -5,7 +5,7 @@
  * Description: Simulation tasks for software reading/writing (with test patterns)
  * of the block buffers.
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_tasks_mcntrl_en_dis_priority.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks_mcntrl_timing.vh

@@ -5,7 +5,7 @@
  * Description: Simulation tasks for programming I/O delays and other timing
  * parameters in the memory controller
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_tasks_mcntrl_timing.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks_pio_sequences.vh

@@ -5,7 +5,7 @@
  * Description: Simulation tasks for programming memory transaction
  * sequences (controlles by PS)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_tasks_pio_sequences.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks_ps_pio.vh

@@ -5,7 +5,7 @@
  * Description: Simulation tasks for mcntrl_ps_pio module (launching software
  * - programmed memory transaction sequences)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_tasks_ps_pio.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

includes/x393_tasks_status.vh

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Simulation tasks for the x393 related to status
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * x393_status.vh is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_4mux.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: 4-to-1 mux to cmbine memory sequences sources
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_4mux.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_linear_mux.v

@@ -6,7 +6,7 @@
  * linear command encoders (cmd_encod_linear_rd and cmd_encod_linear_wr)
  * Latency 1 clcok cycle
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_linear_mux.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_linear_rd.v

@@ -5,7 +5,7 @@
  * Description: Command sequencer generator for reading a sequential up to 1KB page
  * single page access, bank and row will not be changed
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_linear_rd.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_linear_rw.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Combining 2 modules:cmd_encod_linear_rd and cmd_encod_linear_wr
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_linear_rw.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_linear_wr.v

@@ -5,7 +5,7 @@
  * Description: Command sequencer generator for writing a sequential  up to 1KB page
  * single page access, bank and row will not be changed
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_linear_wr.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_tiled_32_rd.v

@@ -10,7 +10,7 @@
  * just reading 32 bytes per row instead of the 16 - that eases timing
  * Start burst should be even (LSB is ignored)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_tiled_32_rd.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_tiled_32_rw.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Combines  cmd_encod_tiled_32_rd and  cmd_encod_tiled_32_wr modules
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_tiled_32_rw.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_tiled_32_wr.v

@@ -10,7 +10,7 @@
  * just writing 32 bytes per row instead of the 16 - that eases timing
  * Start burst should be even (LSB is ignored)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_tiled_32_wr.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_tiled_mux.v

@@ -6,7 +6,7 @@
  * tiled command encoders (cmd_encod_tiled_rd and cmd_encod_tiled_wr)
  * Latency 1 clcok cycle
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_tiled_mux.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_tiled_rd.v

@@ -12,7 +12,7 @@
  * if number of rows >=8, that port is ignored. If number of rows is less than
  * 5 (less for slower clock) without keep_open_in tRTP may be not matched.
  * Seems that actual tile heigt mod 8 should be only 0, 6 or7
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_tiled_rd.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_tiled_rw.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Combines  cmd_encod_tiled_rd and  cmd_encod_tiled_wr modules
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_tiled_rw.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/cmd_encod_tiled_wr.v

@@ -12,7 +12,7 @@
  * if number of rows >=8, that port is ignored. If number of rows is less than
  * 5 (less for slower clock) without keep_open_in tRTP may be not matched.
  * Seems that actual tile heigt mod 8 should be only 0, 6 or7
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_encod_tiled_wr.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl393.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Top level memory controller for 393 camera, includes channel buffers
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl393.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl393_test01.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Temporary  module to interface mcntrl393 control signals
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl393_test01.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl_1kx32r.v

@@ -5,7 +5,7 @@
  * Description: Paged buffer for ddr3 controller read channel
  * with address autoincrement. 32 bit external data.
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl_1kx32r.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl_1kx32w.v

@@ -5,7 +5,7 @@
  * Description: Paged buffer for ddr3 controller write channel
  * with address autoincrement. 32 bit external data. Extends rd to regen
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl_1kx32w.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl_buf_rd.v

@@ -5,7 +5,7 @@
  * Description: Paged buffer for ddr3 controller read channel
  * with address autoincrement. Variable width external data
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl_buf_rd.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl_buf_wr.v

@@ -5,7 +5,7 @@
  * Description: Paged buffer for ddr3 controller write channel
  * with address autoincrement. 32 bit external data. Extends rd to regen
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl_buf_wr.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl_linear_rw.v

@@ -5,7 +5,7 @@
  * Description: Organize paged R/W from DDR3 memory in scan-line order
  * with window support
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl_linear_rw.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl_ps_pio.v

@@ -5,7 +5,7 @@
  * Description: Read/write channels to DDR3 memory with software-programmable
  * command sequence
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl_ps_pio.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/mcntrl_tiled_rw.v

@@ -7,7 +7,7 @@
  * Tiles spreading over two different frames is not yet supported (needed for
  * line-scan mode in JPEG (JP4 - OK)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcntrl_tiled_rw.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/memctrl16.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: 16-channel memory controller
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * memctrl16.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

memctrl/scheduler16.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: 16-channel programmable DDR memory access scheduler
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * scheduler16.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/histogram_saxi.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Histograms transfer to the system memory over S_AXI 
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * histogram_saxi.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/pxd_clock.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: pixel clock line input
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * pxd_clock.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/pxd_single.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: pixel data line input
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * pxd_single.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sens_gamma.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: table based piecewise-linear conversion of 16 -> 8 bit data
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sens_gamma.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sens_histogram.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Calculates per-color histogram over the specified rectangular region
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sens_histogram.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sens_histogram_mux.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Readout multiplexer for 4 histogram modules
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sens_histogram_mux.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sens_parallel12.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Sensor interface with 12-bit for parallel bus
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sens_parallel12.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sensor_channel.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Top module for a sensor channel
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sensor_channel.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sensor_fifo.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Cross clock boundary for sensor data, synchronize to HACT
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sensor_fifo.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sensor_i2c.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: i2c write-only sequencer to control image sensor
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sensor_i2c.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

sensor/sensor_i2c_io.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: sensor_i2c with I/O pad elements
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * sensor_i2c_io.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

simulation_modules/simul_axi_hp_rd.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Simplified model of AXI_HP read channel (64-bit only)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * simul_axi_hp_rd.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

simulation_modules/simul_axi_hp_wr.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Simplified model of AXI_HP write channel (64-bit only)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * simul_axi_hp_wr.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

status_read.v

@@ -12,7 +12,7 @@
  * sequence number to use just 2-byte packets? 
  * TODO: add interrupt capabilities
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * status_read.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

timing/rtc393.v

@@ -6,7 +6,7 @@
  * timestamps. Provides seconds (32 bit) and microseconds (20 bits),
  * allows 24-bit accummulator-based fine adjustment
  *
- * Copyright (c) 2005-2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2005-2015 Elphel, Inc.
  * rtc393.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

timing/timestamp_fifo.v

@@ -8,7 +8,7 @@
  * Write, advance registers and readout events are supposed to have suffitient
  * pauses between them
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * timestamp_fifo.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

timing/timestamp_snapshot.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Take timestamp snapshot and send the ts message over the 8-bit bus
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * timestamp_snapshot.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

timing/timestamp_to_parallel.v

@@ -5,7 +5,7 @@
  * Description: convert byte-parallel timestamp message to parallel sec, usec
  * compatible to the x353 code (for NC353 camera)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * timestamp_to_parallel.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

timing/timestamp_to_serial.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: convert legacy parallel timestamp data to a byte-parallel message
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * timestamp_to_serial.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

timing/timing393.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: timestamp realrted functionality, extrenal synchronization
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * timing393.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/clk_to_clk2x.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: move data between clk and clk2x (nominally posedge aligned)
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * clk_to_clk2x.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/cmd_deser.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Expand command address/data from a byte-wide
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_deser.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/cmd_frame_sequencer.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Store/dispatch commands on per-frame basis
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_frame_sequencer.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/cmd_seq_mux.v

@@ -5,7 +5,7 @@
  * Description: Command multiplexer from 4 channels of frame-based command
  * sequencers.
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * cmd_seq_mux.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/fifo_2regs.v

@@ -5,7 +5,7 @@
  * Description: Simple two-register FIFO, no over/under check,
  * behaves correctly only for correct inputs
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * fifo_2regs.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/index_max_16.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Find index of the maximal of 16 values (masked), 4 cycle latency
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * index_max_16.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/masked_max_reg.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Finds maximal of two masked values, registers result
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * masked_max_reg.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/mcont_common_chnbuf_reg.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Registering data from channel buffer to memory controller
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcont_common_chnbuf_reg.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/mcont_from_chnbuf_reg.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Registering data from channel buffer to memory controller
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcont_from_chnbuf_reg.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/mcont_to_chnbuf_reg.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Registering data from memory controller to channel buffer
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * mcont_to_chnbuf_reg.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/multipulse_cross_clock.v

@@ -8,7 +8,7 @@
  * Lowering Fsrc reduces duty cycle proportianally as counter is in src_clk
  * domain.
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * multipulse_cross_clock.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/pri1hot16.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Priority select one of 16 inputs
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * pri1hot16.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/pulse_cross_clock.v

@@ -6,7 +6,7 @@
  * For same frequencies input pulses can have 1:3 duty cycle EXTRA_DLY=0
  * and 1:5 for EXTRA_DLY=1 
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * pulse_cross_clock.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/status_generate.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: generate byte-serial status data
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * status_generate.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/status_router16.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Routes status data from 16 sources
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * status_router16.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/status_router2.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: 2:1 status data router/mux
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * status_router2.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/status_router4.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Routes status data from 4 sources
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * status_router4.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/status_router8.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Routes status data from 8 sources
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * status_router8.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/table_ad_receive.v

@@ -4,7 +4,7 @@
  * Author: andrey     
  * Description: Receive tabble address/data sent by table_ad_transmit
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * table_ad_receive.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

util_modules/table_ad_transmit.v

@@ -6,7 +6,7 @@
  * In 32-bit mode we duty cycle is >= 6, so there will always be gaps in
  * chn_stb[i] active 
  *
- * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
+ * Copyright (c) 2015 Elphel, Inc.
  * table_ad_transmit.v is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or