Started bug fixing after hardware testing

compressor_jp/cmprs_cmd_decode.v

@@ -235,7 +235,7 @@ module  cmprs_cmd_decode#(
     reg   [23:0] color_sat_xclk; // color saturation values (only 10 LSB in each 12 are used
     reg   [ 2:0] coring_xclk; // color saturation values (only 10 LSB in each 12 are used
 
-    wire         frame_start_xclk;
+//    wire         frame_start_xclk;
     assign cmprs_en_mclk = cmprs_en_mclk_r;
     
     always @ (posedge mclk) begin

compressor_jp/compressor393.v

@@ -663,6 +663,8 @@ module  compressor393 # (
             assign afi1_wstrb = 0; 
             assign afi1_bready = 0;
             assign afi1_wrissuecap1en = 0;
+            assign status_rq_mux[5] = 0;
+            assign status_ad_mux[40 +: 8] = 8'b0;
         end
     endgenerate
 

status_read.v

@@ -32,8 +32,9 @@ module  status_read#(
     parameter STATUS_ADDR =           'h0800, // AXI read address of status read registers
     parameter STATUS_ADDR_MASK =      'h3c00, // AXI write address of status registers
     parameter AXI_RD_ADDR_BITS =      14,
-    parameter integer STATUS_DEPTH=   8 // 256 cells, maybe just 16..64 are enough?
-)(
+    parameter integer STATUS_DEPTH=   8, // 256 cells, maybe just 16..64 are enough?
+    parameter FPGA_VERSION =          32'h03930001
+    )(
     input                        mrst, // @posedge mclk - sync reset
     input                        arst, // @posedge axi_clk - sync reset
     input                        clk,
@@ -79,6 +80,9 @@ module  status_read#(
     assign start=rq && !rq_r;
     assign axird_rdata=axi_status_rdata_r;
     assign axird_selected = select_r; 
+    initial begin
+        ram [DATA_2DEPTH] = FPGA_VERSION;
+    end
     always @ (posedge axi_clk) begin
         if      (arst)              select_r <= 0;
         else if (axird_start_burst) select_r <= select_w;

x393.v

@@ -91,6 +91,7 @@ module  x393 #(
     ,output                      DUMMY_TO_KEEP
     
 );
+`include "fpga_version.vh"
     assign DUMMY_TO_KEEP = frst[2] && fclk[1];
 
 //    localparam ADDRESS_NUMBER=15;
@@ -823,7 +824,8 @@ assign axi_grst = axi_rst_pre;
         .STATUS_ADDR      (STATUS_ADDR),
         .STATUS_ADDR_MASK (STATUS_ADDR_MASK),
         .AXI_RD_ADDR_BITS (AXI_RD_ADDR_BITS),
-        .STATUS_DEPTH     (STATUS_DEPTH)
+        .STATUS_DEPTH     (STATUS_DEPTH),
+        .FPGA_VERSION     (FPGA_VERSION)
     ) status_read_i (
         .mrst             (mrst),                          // input
         .arst             (arst),                          // input

x393.xdc

@@ -423,12 +423,12 @@ set_property PACKAGE_PIN Y18  [get_ports {sns4_pg}]
 # for this design, you may use the CLOCK_DEDICATED_ROUTE constraint in the .xdc file to demote this message to a WARNING.
 # However, the use of this override is highly discouraged. These examples can be used directly in the .xdc file to override this clock rule.
 
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[0].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[1].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[2].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[3].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
-
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[0].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[1].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[2].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
-set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[3].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
\ No newline at end of file
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[0].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[1].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[2].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[3].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout0]
+
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[0].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[1].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[2].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
+#set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets sensors393_i/sensor_channel_block[3].sensor_channel_i/sens_parallel12_i/mmcm_phase_cntr_i/clkout1]
\ No newline at end of file