Commit 10d144ea authored by Andrey Filippov's avatar Andrey Filippov

v. 0105, fixed raw for large window - channel interefence remains

parent 614bc659
This diff is collapsed.
......@@ -36,7 +36,8 @@
* with at least one of the Free Software programs.
*/
parameter FPGA_VERSION = 32'h03930104; // serial - 17.4 - added RAW mode (for tiff files) timing met
parameter FPGA_VERSION = 32'h03930105; // parallel - 17.4 - fixing wide raw frames
// parameter FPGA_VERSION = 32'h03930104; // parallel - 17.4 - added RAW mode (for tiff files) timing met
// parameter FPGA_VERSION = 32'h03930103; // serial - 17.4 - trigger polarity on GP1 inverted
// parameter FPGA_VERSION = 32'h03930102; // serial - 17.4 - disabling SOF when setting interface, bug fix
// parameter FPGA_VERSION = 32'h03930101; // serial - 17.4 - disabling SOF when setting interface - met
......
......@@ -79,10 +79,10 @@
// parameter SENSOR_IMAGE_TYPE2 = "NORM11", // 4",
// parameter SENSOR_IMAGE_TYPE3 = "NORM12",
parameter SENSOR_IMAGE_TYPE0 = "NORM13",
parameter SENSOR_IMAGE_TYPE1 = "NORM13",
parameter SENSOR_IMAGE_TYPE2 = "NORM14", // 4",
parameter SENSOR_IMAGE_TYPE3 = "NORM15",
parameter SENSOR_IMAGE_TYPE0 = "TEST01-1044X36", // "NORM13",
parameter SENSOR_IMAGE_TYPE1 = "TEST01-1044X36", // "NORM13",
parameter SENSOR_IMAGE_TYPE2 = "TEST01-1044X36", // "NORM14", // 4",
parameter SENSOR_IMAGE_TYPE3 = "TEST01-1044X36", // "NORM15",
......@@ -134,7 +134,7 @@
parameter HISTOGRAM_START_PAGE = 20'h12345,
parameter FRAME_WIDTH_ROUND_BITS = 9, // multiple of 512 pixels (32 16-byte bursts) (11 - ful SDRAM page)
parameter WOI_WIDTH= 64,
parameter WOI_WIDTH= 1040, // 64,
parameter WOI_HEIGHT= 32,
parameter QUADRANTS_PXD_HACT_VACT = 6'h01, // 2 bits each: data-0, hact - 1, vact - 2
......
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -1167,6 +1167,7 @@ module mcntrl393 #(
mcntrl_tiled_linear_rw #(
.ADDRESS_NUMBER (ADDRESS_NUMBER),
.COLADDR_NUMBER (COLADDR_NUMBER),
.NUM_XFER_BITS (NUM_XFER_BITS),
.FRAME_WIDTH_BITS (FRAME_WIDTH_BITS),
.FRAME_HEIGHT_BITS (FRAME_HEIGHT_BITS),
.MAX_TILE_WIDTH (MAX_TILE_WIDTH),
......
......@@ -45,6 +45,7 @@
module mcntrl_tiled_linear_rw#(
parameter ADDRESS_NUMBER= 15,
parameter COLADDR_NUMBER= 10,
parameter NUM_XFER_BITS= 6, // number of bits to specify transfer length - linear mode
parameter FRAME_WIDTH_BITS= 13, // Maximal frame width - 8-word (16 bytes) bursts
parameter FRAME_HEIGHT_BITS= 16, // Maximal frame height
parameter MAX_TILE_WIDTH= 6, // number of bits to specify maximal tile (width-1) (6 -> 64). Used as NUM_XFER_BITS in LINEAR mode
......@@ -594,11 +595,8 @@ module mcntrl_tiled_linear_rw#(
row_left[NUM_XFER_BITS:0]; // 7 bits, max 'h40
*/
lim_by_tile_width <= (|row_left[FRAME_WIDTH_BITS:MAX_TILE_WIDTH] || (!linear_mode && (row_left[MAX_TILE_WIDTH:0] >= tile_cols)))?
(linear_mode ? {(MAX_TILE_WIDTH + 1){1'b1}} : tile_cols):
(linear_mode ? (1<< NUM_XFER_BITS) : tile_cols):
row_left[MAX_TILE_WIDTH:0]; // 7 bits, max 'h40
end
......@@ -724,7 +722,7 @@ wire start_not_partial= xfer_start_r[0] && !xfer_limited_by_mem_page_r;
if (mrst) curr_y <= 0;
else if (chn_rst || frame_start_r[0]) curr_y <= start_y;
else if (xfer_start_r[0] && last_in_row) curr_y <= next_y[FRAME_HEIGHT_BITS-1:0];
else if (xfer_start_r[0] && last_in_row) curr_y <= next_y[FRAME_HEIGHT_BITS-1:0]; //FIXME: never happens last_in_row
if (mrst) last_block <= 0;
else if (chn_rst || !busy_r) last_block <= 0;
......
......@@ -35,36 +35,26 @@ from PIL import Image
import sys
import numpy as np
try:
fname = sys.argv[1]
except IndexError:
fname = "/data_ssd/nc393/elphel393/fpga-elphel/x393/attic/hor-pairs-12b-1044x36.tiff"
class imagej_tiff:
# imagej stores labels lengths in this tag
__TIFF_TAG_LABELS_LENGTHS = 50838
# imagej stores labels conents in this tag
__TIFF_TAG_LABELS_STRINGS = 50839
# init
def __init__(self,filename, digits, outname):
# file name
self.fname = filename
self.outname = outname
try:
digits = int(sys.argv[2])
except:
digits = 3
try:
outname = sys.argv[3]
except IndexError:
outname = fname.replace(".tiff",".vh")
tif = Image.open(filename)
# total number of layers in tiff
# self.nimages = tif.n_frames
# labels array
# self.labels = []
# infos will contain xml data Elphel stores in some of tiff files
# self.infos = []
# dictionary from decoded infos[0] xml data
# self.props = {}
tif = Image.open(fname)
# bits per sample, type int
# self.bpp = tif.tag[258][0]
image_array = np.array(tif)
image_array = np.array(tif)
f="%%0%dx"%(digits)
with open(outname,"w") as outfile:
f="%%0%dx"%(digits)
with open(outname,"w") as outfile:
print("//",file=outfile)
print("// autogenerated from %s"%(fname),file=outfile)
print("//",file=outfile)
......@@ -72,23 +62,7 @@ class imagej_tiff:
for pixel in image_line:
print(f%(pixel), file=outfile, end = " ")
print(file=outfile)
tif.close()
tif.close()
#MAIN
if __name__ == "__main__":
try:
fname = sys.argv[1]
except IndexError:
fname = "/data_ssd/nc393/elphel393/fpga-elphel/x393/attic/hor-pairs-12b-1044x36.tiff"
try:
digits = int(sys.argv[2])
except:
digits = 3
try:
outname = sys.argv[3]
except IndexError:
outname = fname.replace(".tiff",".vh")
print ("All done!")
ijt = imagej_tiff(fname,digits,outname)
print ("All done!")
\ No newline at end of file
......@@ -91,7 +91,8 @@ module simul_sensor12bits # (
localparam t_afterHACT=lline-nbpf-ngp1-ncols; // 352
localparam t_lastline= nrowa*lline+1; // 1664
reg [15:0] sensor_data[0:4095]; // up to 64 x 64 pixels // SuppressThisWarning VEditor - Will be assigned by $readmem
//reg [15:0] sensor_data[0:4095]; // up to 64 x 64 pixels // SuppressThisWarning VEditor - Will be assigned by $readmem
reg [15:0] sensor_data[0:65535]; // up to 1024 x 64 pixels // SuppressThisWarning VEditor - Will be assigned by $readmem
// $readmemh("sensor.dat",sensor_data);
......@@ -114,8 +115,11 @@ wire [15:0] cntrd;
wire NMRST=!MRST;
wire [5:0] row_index=row[5:0]-new_bayer;
wire [5:0] col_index=col[5:0]-new_bayer;
//wire [5:0] row_index=row[5:0]-new_bayer;
//wire [5:0] col_index=col[5:0]-new_bayer;
wire [11:0] row_index=row-new_bayer;
wire [11:0] col_index=col-new_bayer;
// random
......@@ -133,13 +137,11 @@ assign #1 cntrd= cntr;
//assign #tDDO D = OE? {10{1'bz}}: ((ihact || ibpf)? ((ramp)?(col[9:0] + row[9:0]):(d_rand)): 10'b0); // just test pattern
//assign #tDDO D = OE? {10{1'bz}}: ((ihact || ibpf)? ((ramp)?(col[9:0] + row[9:0]):(sensor_data[{row_index[5:0],col_index[5:0]}])): 10'b0); // just test pattern
//assign #tDDO D = OE? {12{1'bz}}: ((ihact || ibpf)? ((ramp)?(col[11:0] + row[11:0]):(sensor_data[{row_index[5:0],col_index[5:0]}])): 12'b0); // just test pattern
assign #tDDO D = OE? {12{1'bz}}: ((ihact || ibpf)? ((ramp)?({row[11:8],8'h0} + col[11:0]):(sensor_data[{row_index[5:0],col_index[5:0]}])): 12'b0); // just test pattern
//assign #tDDO BPF = ibpf;
//assign #tDDO HACT= ihact;
//assign #tDDO VACT= ivact;
//assign #tDDO D = OE? {12{1'bz}}: ((ihact || ibpf)? ((ramp)?({row[11:8],8'h0} + col[11:0]):(sensor_data[{row_index[5:0],col_index[5:0]}])): 12'b0); // just test pattern
assign #tDDO D = OE? {12{1'bz}}: ((ihact || ibpf)? ((ramp)?({row[11:8],8'h0} + col[11:0]):(sensor_data[ncols * row_index + col_index])): 12'b0); // just test pattern
assign #tDDO1 BPF = ibpf;
assign #tDDO1 HACT= ihact;
assign #tDDO1 VACT= ivact;
......@@ -189,6 +191,7 @@ initial begin
else if (SENSOR_IMAGE_TYPE == "NORM14") $readmemh({`ROOTPATH,"/input_data/sensor_14.dat"},sensor_data);
else if (SENSOR_IMAGE_TYPE == "NORM15") $readmemh({`ROOTPATH,"/input_data/sensor_15.dat"},sensor_data);
else if (SENSOR_IMAGE_TYPE == "NORM16") $readmemh({`ROOTPATH,"/input_data/sensor_16.dat"},sensor_data);
else if (SENSOR_IMAGE_TYPE == "TEST01-1044X36") $readmemh({`ROOTPATH,"/input_data/test01-1044x36.dat"},sensor_data);
else begin
$display ("WARNING: Unrecognized sensor image :'%s', using default 'NORM': input_data/sensor.dat",SENSOR_IMAGE_TYPE);
$readmemh({`ROOTPATH,"/input_data/sensor.dat"},sensor_data);
......
No preview for this file type
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment