odelay_fine_pipe.v 3.87 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12
/*******************************************************************************
 * Module: odelay_fine_pipe
 * Date:2014-04-25  
 * Author: Andrey Filippov
 * Description: ODELAYE2_FINEDELAY wrapper with fine control pipelined
 *
 * Copyright (c) 2014 Elphel, Inc.
 * idelay_fine_pipe.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
13
 *  odelay_fine_pipe.v is distributed in the hope that it will be useful,
14 15 16 17 18 19
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
20 21 22 23 24 25
 *
 * Additional permission under GNU GPL version 3 section 7:
 * If you modify this Program, or any covered work, by linking or combining it
 * with independent modules provided by the FPGA vendor only (this permission
 * does not extend to any 3-rd party modules, "soft cores" or macros) under
 * different license terms solely for the purpose of generating binary "bitstream"
26
 * files and/or simulating the code, the copyright holders of this Program give
27 28
 * you the right to distribute the covered work without those independent modules
 * as long as the source code for them is available from the FPGA vendor free of
Andrey Filippov's avatar
Andrey Filippov committed
29
 * charge, and there is no dependence on any encrypted modules for simulating of
30 31 32
 * the combined code. This permission applies to you if the distributed code
 * contains all the components and scripts required to completely simulate it
 * with at least one of the Free Software programs.
33 34 35
 *******************************************************************************/
`timescale 1ns/1ps

36 37 38
module  odelay_fine_pipe
//SuppressWarnings VEditor - IODELAY_GRP used in (* *) construnt
# ( parameter  IODELAY_GRP  = "IODELAY_MEMORY",
39
    parameter [7:0] DELAY_VALUE = 0,
40 41 42
    parameter real REFCLK_FREQUENCY = 200.0,
    parameter HIGH_PERFORMANCE_MODE    = "FALSE"
) (
43 44 45 46 47 48 49 50 51
    input clk,
    input rst,
    input set,
    input ld,
    input [7:0] delay,
    input data_in,
    output data_out
);
    reg [2:0] fdly_pre=DELAY_VALUE[2:0], fdly=DELAY_VALUE[2:0];
52
    always @ (posedge clk) begin
53 54
        if (rst)      fdly_pre <= DELAY_VALUE[2:0];
        else if (ld)  fdly_pre <= delay[2:0];
55
        
56 57 58
        if (rst)      fdly <= DELAY_VALUE[2:0];
        else if (set) fdly <= fdly_pre;
    end
59
    `ifdef SIMULATION
60 61 62 63 64
        reg [7:0] delay_r;
        always @ (posedge clk) begin
            if (rst)      delay_r <= DELAY_VALUE;
            else if (ld)  delay_r <= delay;
        end
65
        always @ (fdly_pre) begin
66
            if (fdly_pre > 3'h4) $display ("ERROR: fine odelay value should be <5, specified %d (0x%x) @ %t", fdly_pre, delay_r,$time);  
67
        end
68
    `endif //SIMULATION
69
 
70 71 72 73
`ifndef IGNORE_ATTR
    (* IODELAY_GROUP = IODELAY_GRP *)
`endif    
 ODELAYE2_FINEDELAY
74 75 76 77 78 79 80
     #(
        .CINVCTRL_SEL("FALSE"),
        .DELAY_SRC("ODATAIN"),
        .FINEDELAY("ADD_DLY"),
        .HIGH_PERFORMANCE_MODE(HIGH_PERFORMANCE_MODE),
        .ODELAY_TYPE("VAR_LOAD_PIPE"),
        .ODELAY_VALUE(DELAY_VALUE>>3),
81 82
//        .IS_C_INVERTED(1'b0), // ISE does not have this parameter
//        .IS_ODATAIN_INVERTED(1'b0),  // ISE does not have this parameter
83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104
        .PIPE_SEL("TRUE"),
        .REFCLK_FREQUENCY(REFCLK_FREQUENCY),
        .SIGNAL_PATTERN("DATA")
    )
    odelay2_finedelay_i(
        .CNTVALUEOUT(),
        .DATAOUT(data_out),
        .C(clk),
        .CE(1'b0),
        .CINVCTRL(1'b0),
        .CNTVALUEIN(delay[7:3]),
        .CLKIN(1'b0),
        .ODATAIN(data_in),
        .OFDLY(fdly),
        .INC(1'b0),
        .LD(set),
        .LDPIPEEN(ld),
        .REGRST(rst)
    );
    
endmodule