x393_testbench01.tf 73.3 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*******************************************************************************
 * Module: x393_testbench01
 * Date:2015-02-06  
 * Author: andrey     
 * Description: testbench for the initial x393.v simulation
 *
 * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
 * x393_testbench01.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 *  x393_testbench01.tf is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *******************************************************************************/
`timescale 1ns/1ps
`define use200Mhz 1
`define DEBUG_FIFO 1
24 25
`undef WAIT_MRS
`define SET_PER_PIN_DEALYS 1 // set individual (including per-DQ pin delays)
26 27
`define PS_PIO_WAIT_COMPLETE 0 // wait until PS PIO module finished transaction before starting a new one
// Disabled already passed test to speedup simulation
28 29
//`define TEST_WRITE_LEVELLING 1
//`define TEST_READ_PATTERN 1
30 31
`define TEST_WRITE_BLOCK 1
`define TEST_READ_BLOCK 1
32 33


34
`define TEST_SCANLINE_WRITE 1
35
    `define TEST_SCANLINE_WRITE_WAIT 1 // wait TEST_SCANLINE_WRITE finished (frame_done)
36
`define TEST_SCANLINE_READ  1
37
    `define TEST_READ_SHOW  1
38
`define TEST_TILED_WRITE  1
39
    `define TEST_TILED_WRITE_WAIT 1 // wait TEST_SCANLINE_WRITE finished (frame_done)
40

41
`define TEST_TILED_READ  1
42

43 44
`define TEST_TILED_WRITE32  1
`define TEST_TILED_READ32  1
45

46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
module  x393_testbench01 #(
`include "includes/x393_parameters.vh"
`include "includes/x393_simulation_parameters.vh"
)(
);
`ifdef IVERILOG              
//    $display("IVERILOG is defined");
    `include "IVERILOG_INCLUDE.v"
`else
//    $display("IVERILOG is not defined");
    parameter lxtname = "x393.lxt";
`endif
`define DEBUG_WR_SINGLE 1  
`define DEBUG_RD_DATA 1  
`include "includes/x393_localparams.vh"
  // DDR3 signals
  wire        SDRST;
  wire        SDCLK;  // output
  wire        SDNCLK; // output
  wire [ADDRESS_NUMBER-1:0] SDA;    // output[14:0] 
  wire [ 2:0] SDBA;   // output[2:0] 
  wire        SDWE;   // output
  wire        SDRAS;  // output
  wire        SDCAS;  // output
  wire        SDCKE;  // output
  wire        SDODT;  // output
  wire [15:0] SDD;    // inout[15:0] 
  wire        SDDML;  // inout
  wire        DQSL;   // inout
  wire        NDQSL;  // inout
  wire        SDDMU;  // inout
  wire        DQSU;   // inout
  wire        NDQSU;  // inout
  wire        DUMMY_TO_KEEP;  // output to keep PS7 signals from "optimization"
Andrey Filippov's avatar
Andrey Filippov committed
80
//  wire        MEMCLK;
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101
  
  // Simulation signals
  reg [11:0] ARID_IN_r;
  reg [31:0] ARADDR_IN_r;
  reg  [3:0] ARLEN_IN_r;
  reg  [2:0] ARSIZE_IN_r;
  reg  [1:0] ARBURST_IN_r;
  reg [11:0] AWID_IN_r;
  reg [31:0] AWADDR_IN_r;
  reg  [3:0] AWLEN_IN_r;
  reg  [2:0] AWSIZE_IN_r;
  reg  [1:0] AWBURST_IN_r;

  reg [11:0] WID_IN_r;
  reg [31:0] WDATA_IN_r;
  reg [ 3:0] WSTRB_IN_r;
  reg        WLAST_IN_r;
  
  reg [11:0] LAST_ARID; // last issued ARID

  // SuppressWarnings VEditor : assigned in $readmem() system task
102
  wire [SIMUL_AXI_READ_WIDTH-1:0] SIMUL_AXI_ADDR_W;
103 104 105 106 107
  // SuppressWarnings VEditor
  wire        SIMUL_AXI_MISMATCH;
  // SuppressWarnings VEditor
  reg  [31:0] SIMUL_AXI_READ;
  // SuppressWarnings VEditor
108
  reg  [SIMUL_AXI_READ_WIDTH-1:0] SIMUL_AXI_ADDR;
109 110
  // SuppressWarnings VEditor
  reg         SIMUL_AXI_FULL; // some data available
111
  wire        SIMUL_AXI_EMPTY= ~rvalid && rready && (rid==LAST_ARID); //SuppressThisWarning VEditor : may be unused, just for simulation // use it to wait for?
112
  reg  [31:0] registered_rdata; // here read data from tasks goes
113 114
  // SuppressWarnings VEditor
  reg         WAITING_STATUS;   // tasks are waiting for status
115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195

  reg        CLK;
  reg        RST;
  reg        AR_SET_CMD_r;
  wire       AR_READY;

  reg        AW_SET_CMD_r;
  wire       AW_READY;

  reg        W_SET_CMD_r;
  wire       W_READY;

  wire [11:0]  #(AXI_TASK_HOLD) ARID_IN = ARID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) ARADDR_IN = ARADDR_IN_r;
  wire  [3:0]  #(AXI_TASK_HOLD) ARLEN_IN = ARLEN_IN_r;
  wire  [2:0]  #(AXI_TASK_HOLD) ARSIZE_IN = ARSIZE_IN_r;
  wire  [1:0]  #(AXI_TASK_HOLD) ARBURST_IN = ARBURST_IN_r;
  wire [11:0]  #(AXI_TASK_HOLD) AWID_IN = AWID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) AWADDR_IN = AWADDR_IN_r;
  wire  [3:0]  #(AXI_TASK_HOLD) AWLEN_IN = AWLEN_IN_r;
  wire  [2:0]  #(AXI_TASK_HOLD) AWSIZE_IN = AWSIZE_IN_r;
  wire  [1:0]  #(AXI_TASK_HOLD) AWBURST_IN = AWBURST_IN_r;
  wire [11:0]  #(AXI_TASK_HOLD) WID_IN = WID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) WDATA_IN = WDATA_IN_r;
  wire [ 3:0]  #(AXI_TASK_HOLD) WSTRB_IN = WSTRB_IN_r;
  wire         #(AXI_TASK_HOLD) WLAST_IN = WLAST_IN_r;
  wire         #(AXI_TASK_HOLD) AR_SET_CMD = AR_SET_CMD_r;
  wire         #(AXI_TASK_HOLD) AW_SET_CMD = AW_SET_CMD_r;
  wire         #(AXI_TASK_HOLD) W_SET_CMD =  W_SET_CMD_r;

  reg  [3:0] RD_LAG;  // ready signal lag in axi read channel (0 - RDY=1, 1..15 - RDY is asserted N cycles after valid)   
  reg  [3:0] B_LAG;   // ready signal lag in axi arete response channel (0 - RDY=1, 1..15 - RDY is asserted N cycles after valid)   

// Simulation modules interconnection
  wire [11:0] arid;
  wire [31:0] araddr;
  wire [3:0]  arlen;
  wire [2:0]  arsize;
  wire [1:0]  arburst;
  // SuppressWarnings VEditor : assigned in $readmem(14) system task
  wire [3:0]  arcache;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [2:0]  arprot;
  wire        arvalid;
  wire        arready;

  wire [11:0] awid;
  wire [31:0] awaddr;
  wire [3:0]  awlen;
  wire [2:0]  awsize;
  wire [1:0]  awburst;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [3:0]  awcache;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [2:0]  awprot;
  wire        awvalid;
  wire        awready;

  wire [11:0] wid;
  wire [31:0] wdata;
  wire [3:0]  wstrb;
  wire        wlast;
  wire        wvalid;
  wire        wready;
  
  wire [31:0] rdata;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [11:0] rid;
  wire        rlast;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire  [1:0] rresp;
  wire        rvalid;
  wire        rready;
  wire        rstb=rvalid && rready;

  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire  [1:0] bresp;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [11:0] bid;
  wire        bvalid;
  wire        bready;
196 197
  integer     NUM_WORDS_READ;
  integer     NUM_WORDS_EXPECTED;
198
  reg  [15:0] ENABLED_CHANNELS = 0; // currently enabled memory channels
199 200
//  integer     SCANLINE_CUR_X;
//  integer     SCANLINE_CUR_Y;
201
  wire AXI_RD_EMPTY=NUM_WORDS_READ==NUM_WORDS_EXPECTED; //SuppressThisWarning VEditor : may be unused, just for simulation
202 203 204 205
  
  localparam       FRAME_START_ADDRESS= 'h1000; // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
  localparam       FRAME_FULL_WIDTH=    'h0c0;  // Padded line length (8-row increment), in 8-bursts (16 bytes)
//  localparam SCANLINE_WINDOW_WH=  `h079000a2;  // 2592*1936: low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
206
//  localparam       SCANLINE_WINDOW_WH=  'h0009000b;  // 176*9: low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
207 208
  localparam       WINDOW_WIDTH=    'h000b; //'h005b; //'h000b;  // 176:  13-bit window width (0->'h4000)
  localparam       WINDOW_HEIGHT=   'h000a;  // 9:    16-bit window height (0->'h10000)
209
//  localparam       SCANLINE_X0Y0=       'h00050003;  // X0=3*16=48, Y0=5: // low word - 13-bit window left, high word - 16-bit window top
210
  localparam       WINDOW_X0=     'h5c; //'h7f; //     'h005c; // 'h7c; // 'h0003;  // X0=3*16=48 - 13-bit window left
211
  localparam       WINDOW_Y0=         'h0005;  // Y0=5: 16-bit window top
212 213 214
//  localparam       SCANLINE_STARTXY=    'h0;         // low word - 13-bit start X (relative to window), high word - 16-bit start y (normally 0)
  localparam       SCANLINE_STARTX=     'h0;         // 13-bit start X (relative to window), high word (normally 0)
  localparam       SCANLINE_STARTY=     'h0;         // 16-bit start y (normally 0)
215 216
  localparam [1:0] SCANLINE_EXTRA_PAGES= 0;          // 0..2 - number of pages in the buffer to keep/not write
  
217 218 219
  localparam       TILED_STARTX=     'h0;         // 13-bit start X (relative to window), high word (normally 0)
  localparam       TILED_STARTY=     'h0;         // 16-bit start y (normally 0)
  localparam [1:0] TILED_EXTRA_PAGES= 0;          // 0..2 - number of pages in the buffer to keep/not write
220
  
221
  localparam       TILED_KEEP_OPEN=   1'b1; //1'b1; // 1'b0;       // Do not close banks between reads (valid only for tiles <=8 rows, needed if less than 3? rows)  
222
  
223 224
  localparam       TILE_WIDTH=    'h04; //     6-bit tile width  (1..'h40)
  localparam       TILE_HEIGHT=   'h08; //'h05; // 'h04; //'h06;  //    6-bit tile height (1..'h40) // 4 - violation
225 226 227
  localparam       TILE_VSTEP=    'h04;  //    6-bit tile vertical step, with no overlap it is equal to TILE_HEIGHT (1..'h40)
  
  
228 229
  localparam       TEST01_START_FRAME=   1;         
  localparam       TEST01_NEXT_PAGE=     2;         
230 231
  localparam       TEST01_SUSPEND=       4;
  
232 233
  
  
234
  //NUM_XFER_BITS=6
235 236
  localparam       SCANLINE_PAGES_PER_ROW= (WINDOW_WIDTH>>NUM_XFER_BITS)+((WINDOW_WIDTH[NUM_XFER_BITS-1:0]==0)?0:1);
  localparam       TILES_PER_ROW= (WINDOW_WIDTH/TILE_WIDTH)+  ((WINDOW_WIDTH % TILE_WIDTH==0)?0:1);
237 238 239
//  localparam       TILE_ROWS_PER_WINDOW= ((WINDOW_HEIGHT-TILE_HEIGHT)/TILE_VSTEP) + (((WINDOW_HEIGHT-TILE_HEIGHT)%TILE_VSTEP==0)?0:1) +1;
//  localparam       TILE_ROWS_PER_WINDOW= (WINDOW_HEIGHT/TILE_VSTEP) + ((WINDOW_HEIGHT%TILE_VSTEP==0)?0:1);
  localparam       TILE_ROWS_PER_WINDOW= ((WINDOW_HEIGHT-1)/TILE_VSTEP) + 1;
240 241 242 243
  
  localparam       TILE_SIZE= TILE_WIDTH*TILE_HEIGHT;
  
  
244
//  localparam  integer     SCANLINE_FULL_XFER= 1<<NUM_XFER_BITS; // 64 - full page transfer in 8-bursts
245
//  localparam  integer     SCANLINE_LAST_XFER= WINDOW_WIDTH % (1<<NUM_XFER_BITS); // last page transfer size in a row
246
  
247
//  integer ii;
248
  integer  SCANLINE_XFER_SIZE;
249
  localparam       TEST_INITIAL_BURST=   4; // 3;
250
always #(CLKIN_PERIOD/2) CLK = ~CLK;
251 252 253 254 255 256 257 258 259 260 261 262 263 264
  initial begin
`ifdef IVERILOG              
    $display("IVERILOG is defined");
`else
    $display("IVERILOG is not defined");
`endif

`ifdef ICARUS              
    $display("ICARUS is defined");
`else
    $display("ICARUS is not defined");
`endif
    $dumpfile(lxtname);
  // SuppressWarnings VEditor : assigned in $readmem() system task
Andrey Filippov's avatar
Andrey Filippov committed
265
    $dumpvars(0,x393_testbench01);
266 267 268 269 270
    CLK =1'b0;
    RST = 1'bx;
    AR_SET_CMD_r = 1'b0;
    AW_SET_CMD_r = 1'b0;
    W_SET_CMD_r = 1'b0;
271 272 273
    #500;
//    $display ("x393_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.rst=%d",x393_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.rst);
    #500;
274 275 276 277
    RST = 1'b1;
    NUM_WORDS_EXPECTED =0;
//    #99000; // same as glbl
    #9000; // same as glbl
278
    repeat (20) @(posedge CLK) ;
279
    RST =1'b0;
280 281 282
//set simulation-only parameters   
    axi_set_b_lag(0); //(1);
    axi_set_rd_lag(0);
283
    program_status_all(DEFAULT_STATUS_MODE,'h2a); // mode auto with sequence number increment 
Andrey Filippov's avatar
Andrey Filippov committed
284 285

    enable_memcntrl(1);                 // enable memory controller
Andrey Filippov's avatar
Andrey Filippov committed
286

287
    set_up;
288 289
    axi_set_wbuf_delay(WBUF_DLY_DFLT); //DFLT_WBUF_DELAY - used in synth. code
    
Andrey Filippov's avatar
Andrey Filippov committed
290 291 292 293 294 295 296 297 298 299 300 301
    wait_phase_shifter_ready;
    read_all_status;
// enable output for address/commands to DDR chip    
    enable_cmda(1);
    repeat (16) @(posedge CLK) ;
// remove reset from DDR chip    
    activate_sdrst(0); // was enabled at system reset

    #5000; // actually 500 usec required
    repeat (16) @(posedge CLK) ;
    enable_cke(1);
    repeat (16) @(posedge CLK) ;
Andrey Filippov's avatar
Andrey Filippov committed
302 303 304 305 306 307 308
    
//    enable_memcntrl(1);                 // enable memory controller
    enable_memcntrl_channels(16'h0003); // only channel 0 and 1 are enabled
    configure_channel_priority(0,0);    // lowest priority channel 0
    configure_channel_priority(1,0);    // lowest priority channel 1
    enable_reset_ps_pio(1,0);           // enable, no reset

309
// set MR registers in DDR3 memory, run DCI calibration (long)
310
    wait_ps_pio_ready(DEFAULT_STATUS_MODE, 1); // wait FIFO not half full 
Andrey Filippov's avatar
Andrey Filippov committed
311 312 313
    schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        INITIALIZE_OFFSET, // input [9:0] seq_addr; // sequence start address
                        0,                 // input [1:0] page;     // buffer page number
314
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
315 316 317
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
                        
318 319
   
`ifdef WAIT_MRS 
320
    wait_ps_pio_done(DEFAULT_STATUS_MODE, 1);
321
`else    
Andrey Filippov's avatar
Andrey Filippov committed
322
    repeat (32) @(posedge CLK) ;  // what delay is needed to be sure? Add to PS_PIO?
323 324
//    first refreshes will be fast (accummulated while waiting)
`endif    
Andrey Filippov's avatar
Andrey Filippov committed
325
    enable_refresh(1);
326 327
    axi_set_dqs_odelay('h78); //??? dafaults - wrong?
    
328 329
`ifdef TEST_WRITE_LEVELLING 
    test_write_levelling;
330
`endif
331
`ifdef TEST_READ_PATTERN
332
    test_read_pattern;
333 334
`endif
`ifdef TEST_WRITE_BLOCK
335
    test_write_block;
336 337
`endif
`ifdef TEST_READ_BLOCK
338
    test_read_block;
339
`endif
340
`ifdef TEST_SCANLINE_WRITE
341 342 343 344
    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1); // input                  wait_done;
345
`endif
346
`ifdef TEST_SCANLINE_READ
347 348 349 350
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1); // input                  show_data;
351 352
`endif

353
`ifdef TEST_TILED_WRITE
354 355 356 357 358 359
    test_tiled_write (
         2,                 // [3:0] channel;
         0,                 //       byte32;
         TILED_KEEP_OPEN,   //       keep_open;
         TILED_EXTRA_PAGES, //       extra_pages;
         1);                //       wait_done;
360 361
`endif

362
`ifdef TEST_TILED_READ
363 364 365 366 367 368
    test_tiled_read (
         2,                 // [3:0] channel;
         0,                 //       byte32;
         TILED_KEEP_OPEN,   //       keep_open;
         TILED_EXTRA_PAGES, //       extra_pages;
         1);                //       show_data;
369 370
`endif

371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388
`ifdef TEST_TILED_WRITE32
    test_tiled_write (
         4, // 2,                 // [3:0] channel;
         1,                 //       byte32;
         TILED_KEEP_OPEN,   //       keep_open;
         TILED_EXTRA_PAGES, //       extra_pages;
         1);                //       wait_done;
`endif

`ifdef TEST_TILED_READ32
    test_tiled_read (
         4, //2,                 // [3:0] channel;
         1,                 //       byte32;
         TILED_KEEP_OPEN,   //       keep_open;
         TILED_EXTRA_PAGES, //       extra_pages;
         1);                //       show_data;
`endif

389
  #20000;
390
  $finish;
391 392 393 394
end
// protect from never end
  initial begin
//  #10000000;
395 396
     #200000;
//   #100000;
397
//  #60000;
398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452
    $display("finish testbench 2");
  $finish;
  end



assign x393_i.ps7_i.FCLKCLK=        {4{CLK}};
assign x393_i.ps7_i.FCLKRESETN=     {RST,~RST,RST,~RST};
// Read address
assign x393_i.ps7_i.MAXIGP0ARADDR=  araddr;
assign x393_i.ps7_i.MAXIGP0ARVALID= arvalid;
assign arready=                            x393_i.ps7_i.MAXIGP0ARREADY;
assign x393_i.ps7_i.MAXIGP0ARID=    arid; 
assign x393_i.ps7_i.MAXIGP0ARLEN=   arlen;
assign x393_i.ps7_i.MAXIGP0ARSIZE=  arsize[1:0]; // arsize[2] is not used
assign x393_i.ps7_i.MAXIGP0ARBURST= arburst;
// Read data
assign rdata=                              x393_i.ps7_i.MAXIGP0RDATA; 
assign rvalid=                             x393_i.ps7_i.MAXIGP0RVALID;
assign x393_i.ps7_i.MAXIGP0RREADY=  rready;
assign rid=                                x393_i.ps7_i.MAXIGP0RID;
assign rlast=                              x393_i.ps7_i.MAXIGP0RLAST;
assign rresp=                              x393_i.ps7_i.MAXIGP0RRESP;
// Write address
assign x393_i.ps7_i.MAXIGP0AWADDR=  awaddr;
assign x393_i.ps7_i.MAXIGP0AWVALID= awvalid;

assign awready=                            x393_i.ps7_i.MAXIGP0AWREADY;

//assign awready= AWREADY_AAAA;
assign x393_i.ps7_i.MAXIGP0AWID=awid;

      // SuppressWarnings VEditor all
//  wire [ 1:0] AWLOCK;
      // SuppressWarnings VEditor all
//  wire [ 3:0] AWCACHE;
      // SuppressWarnings VEditor all
//  wire [ 2:0] AWPROT;
assign x393_i.ps7_i.MAXIGP0AWLEN=   awlen;
assign x393_i.ps7_i.MAXIGP0AWSIZE=  awsize[1:0]; // awsize[2] is not used
assign x393_i.ps7_i.MAXIGP0AWBURST= awburst;
      // SuppressWarnings VEditor all
//  wire [ 3:0] AWQOS;
// Write data
assign x393_i.ps7_i.MAXIGP0WDATA=   wdata;
assign x393_i.ps7_i.MAXIGP0WVALID=  wvalid;
assign wready=                             x393_i.ps7_i.MAXIGP0WREADY;
assign x393_i.ps7_i.MAXIGP0WID=     wid;
assign x393_i.ps7_i.MAXIGP0WLAST=   wlast;
assign x393_i.ps7_i.MAXIGP0WSTRB=   wstrb;
// Write responce
assign bvalid=                             x393_i.ps7_i.MAXIGP0BVALID;
assign x393_i.ps7_i.MAXIGP0BREADY=  bready;
assign bid=                                x393_i.ps7_i.MAXIGP0BID;
assign bresp=                              x393_i.ps7_i.MAXIGP0BRESP;
453
//TODO: See how to show problems in include files opened in the editor (test all top *.v files that have it)
454 455 456 457 458 459
// Top module under test
    x393 #(
        .MCONTR_WR_MASK                    (MCONTR_WR_MASK),
        .MCONTR_RD_MASK                    (MCONTR_RD_MASK),
        .MCONTR_CMD_WR_ADDR                (MCONTR_CMD_WR_ADDR),
        .MCONTR_BUF0_RD_ADDR               (MCONTR_BUF0_RD_ADDR),
460 461
        .MCONTR_BUF0_WR_ADDR               (MCONTR_BUF0_WR_ADDR),
        .MCONTR_BUF1_RD_ADDR               (MCONTR_BUF1_RD_ADDR),
462 463
        .MCONTR_BUF1_WR_ADDR               (MCONTR_BUF1_WR_ADDR),
        .MCONTR_BUF2_RD_ADDR               (MCONTR_BUF2_RD_ADDR),
464 465
        .MCONTR_BUF2_WR_ADDR               (MCONTR_BUF2_WR_ADDR),
        .MCONTR_BUF3_RD_ADDR               (MCONTR_BUF3_RD_ADDR),
466 467
        .MCONTR_BUF3_WR_ADDR               (MCONTR_BUF3_WR_ADDR),
        .MCONTR_BUF4_RD_ADDR               (MCONTR_BUF4_RD_ADDR),
468
        .MCONTR_BUF4_WR_ADDR               (MCONTR_BUF4_WR_ADDR),
469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570
        .DLY_LD                            (DLY_LD),
        .DLY_LD_MASK                       (DLY_LD_MASK),
        .MCONTR_PHY_0BIT_ADDR              (MCONTR_PHY_0BIT_ADDR),
        .MCONTR_PHY_0BIT_ADDR_MASK         (MCONTR_PHY_0BIT_ADDR_MASK),
        .MCONTR_PHY_0BIT_DLY_SET           (MCONTR_PHY_0BIT_DLY_SET),
        .MCONTR_PHY_0BIT_CMDA_EN           (MCONTR_PHY_0BIT_CMDA_EN),
        .MCONTR_PHY_0BIT_SDRST_ACT         (MCONTR_PHY_0BIT_SDRST_ACT),
        .MCONTR_PHY_0BIT_CKE_EN            (MCONTR_PHY_0BIT_CKE_EN),
        .MCONTR_PHY_0BIT_DCI_RST           (MCONTR_PHY_0BIT_DCI_RST),
        .MCONTR_PHY_0BIT_DLY_RST           (MCONTR_PHY_0BIT_DLY_RST),
        .MCONTR_TOP_0BIT_ADDR              (MCONTR_TOP_0BIT_ADDR),
        .MCONTR_TOP_0BIT_ADDR_MASK         (MCONTR_TOP_0BIT_ADDR_MASK),
        .MCONTR_TOP_0BIT_MCONTR_EN         (MCONTR_TOP_0BIT_MCONTR_EN),
        .MCONTR_TOP_0BIT_REFRESH_EN        (MCONTR_TOP_0BIT_REFRESH_EN),
        .MCONTR_PHY_16BIT_ADDR             (MCONTR_PHY_16BIT_ADDR),
        .MCONTR_PHY_16BIT_ADDR_MASK        (MCONTR_PHY_16BIT_ADDR_MASK),
        .MCONTR_PHY_16BIT_PATTERNS         (MCONTR_PHY_16BIT_PATTERNS),
        .MCONTR_PHY_16BIT_PATTERNS_TRI     (MCONTR_PHY_16BIT_PATTERNS_TRI),
        .MCONTR_PHY_16BIT_WBUF_DELAY       (MCONTR_PHY_16BIT_WBUF_DELAY),
        .MCONTR_PHY_16BIT_EXTRA            (MCONTR_PHY_16BIT_EXTRA),
        .MCONTR_PHY_STATUS_CNTRL           (MCONTR_PHY_STATUS_CNTRL),
        .MCONTR_ARBIT_ADDR                 (MCONTR_ARBIT_ADDR),
        .MCONTR_ARBIT_ADDR_MASK            (MCONTR_ARBIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_ADDR             (MCONTR_TOP_16BIT_ADDR),
        .MCONTR_TOP_16BIT_ADDR_MASK        (MCONTR_TOP_16BIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_CHN_EN           (MCONTR_TOP_16BIT_CHN_EN),
        .MCONTR_TOP_16BIT_REFRESH_PERIOD   (MCONTR_TOP_16BIT_REFRESH_PERIOD),
        .MCONTR_TOP_16BIT_REFRESH_ADDRESS  (MCONTR_TOP_16BIT_REFRESH_ADDRESS),
        .MCONTR_TOP_16BIT_STATUS_CNTRL     (MCONTR_TOP_16BIT_STATUS_CNTRL),
        .MCONTR_PHY_STATUS_REG_ADDR        (MCONTR_PHY_STATUS_REG_ADDR),
        .MCONTR_TOP_STATUS_REG_ADDR        (MCONTR_TOP_STATUS_REG_ADDR),
        .CHNBUF_READ_LATENCY               (CHNBUF_READ_LATENCY),
        .DFLT_DQS_PATTERN                  (DFLT_DQS_PATTERN),
        .DFLT_DQM_PATTERN                  (DFLT_DQM_PATTERN),
        .DFLT_DQ_TRI_ON_PATTERN            (DFLT_DQ_TRI_ON_PATTERN),
        .DFLT_DQ_TRI_OFF_PATTERN           (DFLT_DQ_TRI_OFF_PATTERN),
        .DFLT_DQS_TRI_ON_PATTERN           (DFLT_DQS_TRI_ON_PATTERN),
        .DFLT_DQS_TRI_OFF_PATTERN          (DFLT_DQS_TRI_OFF_PATTERN),
        .DFLT_WBUF_DELAY                   (DFLT_WBUF_DELAY),
        .DFLT_INV_CLK_DIV                  (DFLT_INV_CLK_DIV),
        .DFLT_CHN_EN                       (DFLT_CHN_EN),
        .DFLT_REFRESH_ADDR                 (DFLT_REFRESH_ADDR),
        .DFLT_REFRESH_PERIOD               (DFLT_REFRESH_PERIOD),
        .ADDRESS_NUMBER                    (ADDRESS_NUMBER),
        .COLADDR_NUMBER                    (COLADDR_NUMBER),
        .PHASE_WIDTH                       (PHASE_WIDTH),
        .SLEW_DQ                           (SLEW_DQ),
        .SLEW_DQS                          (SLEW_DQS),
        .SLEW_CMDA                         (SLEW_CMDA),
        .SLEW_CLK                          (SLEW_CLK),
        .IBUF_LOW_PWR                      (IBUF_LOW_PWR),
        .REFCLK_FREQUENCY                  (REFCLK_FREQUENCY),
        .HIGH_PERFORMANCE_MODE             (HIGH_PERFORMANCE_MODE),
        .CLKIN_PERIOD                      (CLKIN_PERIOD),
        .CLKFBOUT_MULT                     (CLKFBOUT_MULT),
        .CLKFBOUT_MULT_REF                 (CLKFBOUT_MULT_REF),
        .CLKFBOUT_DIV_REF                  (CLKFBOUT_DIV_REF),
        .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
        .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
        .SDCLK_PHASE                       (SDCLK_PHASE),
        .CLK_PHASE                         (CLK_PHASE),
        .CLK_DIV_PHASE                     (CLK_DIV_PHASE),
        .MCLK_PHASE                        (MCLK_PHASE),
        .REF_JITTER1                       (REF_JITTER1),
        .SS_EN                             (SS_EN),
        .SS_MODE                           (SS_MODE),
        .SS_MOD_PERIOD                     (SS_MOD_PERIOD),
        .CMD_PAUSE_BITS                    (CMD_PAUSE_BITS),
        .CMD_DONE_BIT                      (CMD_DONE_BIT),
        .STATUS_ADDR                       (STATUS_ADDR),
        .STATUS_ADDR_MASK                  (STATUS_ADDR_MASK),
        .STATUS_DEPTH                      (STATUS_DEPTH),
        .AXI_WR_ADDR_BITS                  (AXI_WR_ADDR_BITS),
        .AXI_RD_ADDR_BITS                  (AXI_RD_ADDR_BITS),
        .CONTROL_ADDR                      (CONTROL_ADDR),
        .CONTROL_ADDR_MASK                 (CONTROL_ADDR_MASK),
        .NUM_CYCLES_LOW_BIT                (NUM_CYCLES_LOW_BIT),
        .NUM_CYCLES_00                     (NUM_CYCLES_00),
        .NUM_CYCLES_01                     (NUM_CYCLES_01),
        .NUM_CYCLES_02                     (NUM_CYCLES_02),
        .NUM_CYCLES_03                     (NUM_CYCLES_03),
        .NUM_CYCLES_04                     (NUM_CYCLES_04),
        .NUM_CYCLES_05                     (NUM_CYCLES_05),
        .NUM_CYCLES_06                     (NUM_CYCLES_06),
        .NUM_CYCLES_07                     (NUM_CYCLES_07),
        .NUM_CYCLES_08                     (NUM_CYCLES_08),
        .NUM_CYCLES_09                     (NUM_CYCLES_09),
        .NUM_CYCLES_10                     (NUM_CYCLES_10),
        .NUM_CYCLES_11                     (NUM_CYCLES_11),
        .NUM_CYCLES_12                     (NUM_CYCLES_12),
        .NUM_CYCLES_13                     (NUM_CYCLES_13),
        .NUM_CYCLES_14                     (NUM_CYCLES_14),
        .NUM_CYCLES_15                     (NUM_CYCLES_15),
        .MCNTRL_PS_ADDR                    (MCNTRL_PS_ADDR),
        .MCNTRL_PS_MASK                    (MCNTRL_PS_MASK),
        .MCNTRL_PS_STATUS_REG_ADDR         (MCNTRL_PS_STATUS_REG_ADDR),
        .MCNTRL_PS_EN_RST                  (MCNTRL_PS_EN_RST),
        .MCNTRL_PS_CMD                     (MCNTRL_PS_CMD),
        .MCNTRL_PS_STATUS_CNTRL            (MCNTRL_PS_STATUS_CNTRL),
        .NUM_XFER_BITS                     (NUM_XFER_BITS),
        .FRAME_WIDTH_BITS                  (FRAME_WIDTH_BITS),
        .FRAME_HEIGHT_BITS                 (FRAME_HEIGHT_BITS),
571
        .MCNTRL_SCANLINE_CHN1_ADDR         (MCNTRL_SCANLINE_CHN1_ADDR),
572 573 574 575 576 577 578 579 580
        .MCNTRL_SCANLINE_CHN3_ADDR         (MCNTRL_SCANLINE_CHN3_ADDR),
        .MCNTRL_SCANLINE_MASK              (MCNTRL_SCANLINE_MASK),
        .MCNTRL_SCANLINE_MODE              (MCNTRL_SCANLINE_MODE),
        .MCNTRL_SCANLINE_STATUS_CNTRL      (MCNTRL_SCANLINE_STATUS_CNTRL),
        .MCNTRL_SCANLINE_STARTADDR         (MCNTRL_SCANLINE_STARTADDR),
        .MCNTRL_SCANLINE_FRAME_FULL_WIDTH  (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
        .MCNTRL_SCANLINE_WINDOW_WH         (MCNTRL_SCANLINE_WINDOW_WH),
        .MCNTRL_SCANLINE_WINDOW_X0Y0       (MCNTRL_SCANLINE_WINDOW_X0Y0),
        .MCNTRL_SCANLINE_WINDOW_STARTXY    (MCNTRL_SCANLINE_WINDOW_STARTXY),
581
        .MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR),
582 583
        .MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR),
        .MCNTRL_SCANLINE_PENDING_CNTR_BITS (MCNTRL_SCANLINE_PENDING_CNTR_BITS),
584
        .MCNTRL_SCANLINE_FRAME_PAGE_RESET  (MCNTRL_SCANLINE_FRAME_PAGE_RESET),
585 586
        .MAX_TILE_WIDTH                    (MAX_TILE_WIDTH),
        .MAX_TILE_HEIGHT                   (MAX_TILE_HEIGHT),
587
        .MCNTRL_TILED_CHN2_ADDR            (MCNTRL_TILED_CHN2_ADDR),
588 589 590 591 592 593 594 595 596
        .MCNTRL_TILED_CHN4_ADDR            (MCNTRL_TILED_CHN4_ADDR),
        .MCNTRL_TILED_MASK                 (MCNTRL_TILED_MASK),
        .MCNTRL_TILED_MODE                 (MCNTRL_TILED_MODE),
        .MCNTRL_TILED_STATUS_CNTRL         (MCNTRL_TILED_STATUS_CNTRL),
        .MCNTRL_TILED_STARTADDR            (MCNTRL_TILED_STARTADDR),
        .MCNTRL_TILED_FRAME_FULL_WIDTH     (MCNTRL_TILED_FRAME_FULL_WIDTH),
        .MCNTRL_TILED_WINDOW_WH            (MCNTRL_TILED_WINDOW_WH),
        .MCNTRL_TILED_WINDOW_X0Y0          (MCNTRL_TILED_WINDOW_X0Y0),
        .MCNTRL_TILED_WINDOW_STARTXY       (MCNTRL_TILED_WINDOW_STARTXY),
597 598
        .MCNTRL_TILED_TILE_WHS             (MCNTRL_TILED_TILE_WHS),
        .MCNTRL_TILED_STATUS_REG_CHN2_ADDR (MCNTRL_TILED_STATUS_REG_CHN2_ADDR),
599 600 601 602 603 604
        .MCNTRL_TILED_STATUS_REG_CHN4_ADDR (MCNTRL_TILED_STATUS_REG_CHN4_ADDR),
        .MCNTRL_TILED_PENDING_CNTR_BITS    (MCNTRL_TILED_PENDING_CNTR_BITS),
        .MCNTRL_TILED_FRAME_PAGE_RESET     (MCNTRL_TILED_FRAME_PAGE_RESET),
        .BUFFER_DEPTH32                    (BUFFER_DEPTH32),
        .MCNTRL_TEST01_ADDR                 (MCNTRL_TEST01_ADDR),
        .MCNTRL_TEST01_MASK                 (MCNTRL_TEST01_MASK),
605 606
        .MCNTRL_TEST01_CHN1_MODE            (MCNTRL_TEST01_CHN1_MODE),
        .MCNTRL_TEST01_CHN1_STATUS_CNTRL    (MCNTRL_TEST01_CHN1_STATUS_CNTRL),
607 608 609 610 611 612
        .MCNTRL_TEST01_CHN2_MODE            (MCNTRL_TEST01_CHN2_MODE),
        .MCNTRL_TEST01_CHN2_STATUS_CNTRL    (MCNTRL_TEST01_CHN2_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN3_MODE            (MCNTRL_TEST01_CHN3_MODE),
        .MCNTRL_TEST01_CHN3_STATUS_CNTRL    (MCNTRL_TEST01_CHN3_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN4_MODE            (MCNTRL_TEST01_CHN4_MODE),
        .MCNTRL_TEST01_CHN4_STATUS_CNTRL    (MCNTRL_TEST01_CHN4_STATUS_CNTRL),
613
        .MCNTRL_TEST01_STATUS_REG_CHN1_ADDR (MCNTRL_TEST01_STATUS_REG_CHN1_ADDR),
614 615
        .MCNTRL_TEST01_STATUS_REG_CHN2_ADDR (MCNTRL_TEST01_STATUS_REG_CHN2_ADDR),
        .MCNTRL_TEST01_STATUS_REG_CHN3_ADDR (MCNTRL_TEST01_STATUS_REG_CHN3_ADDR),
616
        .MCNTRL_TEST01_STATUS_REG_CHN4_ADDR (MCNTRL_TEST01_STATUS_REG_CHN4_ADDR)
617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634
    ) x393_i (
        .SDRST   (SDRST), // DDR3 reset (active low)
        .SDCLK   (SDCLK), // output 
        .SDNCLK  (SDNCLK), // outputread_and_wait(BASEADDR_STATUS)
        .SDA     (SDA[14:0]), // output[14:0] 
        .SDBA    (SDBA[2:0]), // output[2:0] 
        .SDWE    (SDWE), // output
        .SDRAS   (SDRAS), // output
        .SDCAS   (SDCAS), // output
        .SDCKE   (SDCKE), // output
        .SDODT   (SDODT), // output
        .SDD     (SDD[15:0]), // inout[15:0] 
        .SDDML   (SDDML), // inout
        .DQSL    (DQSL), // inout
        .NDQSL   (NDQSL), // inout
        .SDDMU   (SDDMU), // inout
        .DQSU    (DQSU), // inout
        .NDQSU   (NDQSU), // inout
Andrey Filippov's avatar
Andrey Filippov committed
635 636
        .DUMMY_TO_KEEP(DUMMY_TO_KEEP)  // to keep PS7 signals from "optimization"
//      ,.MEMCLK  (MEMCLK)
637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932
    );
// Micron DDR3 memory model
    /* Instance of Micron DDR3 memory model */
    ddr3 #(
        .TCK_MIN             (2500), 
        .TJIT_PER            (100),
        .TJIT_CC             (200),
        .TERR_2PER           (147),
        .TERR_3PER           (175),
        .TERR_4PER           (194),
        .TERR_5PER           (209),
        .TERR_6PER           (222),
        .TERR_7PER           (232),
        .TERR_8PER           (241),
        .TERR_9PER           (249),
        .TERR_10PER          (257),
        .TERR_11PER          (263),
        .TERR_12PER          (269),
        .TDS                 (125),
        .TDH                 (150),
        .TDQSQ               (200),
        .TDQSS               (0.25),
        .TDSS                (0.20),
        .TDSH                (0.20),
        .TDQSCK              (400),
        .TQSH                (0.38),
        .TQSL                (0.38),
        .TDIPW               (600),
        .TIPW                (900),
        .TIS                 (350),
        .TIH                 (275),
        .TRAS_MIN            (37500),
        .TRC                 (52500),
        .TRCD                (15000),
        .TRP                 (15000),
        .TXP                 (7500),
        .TCKE                (7500),
        .TAON                (400),
        .TWLS                (325),
        .TWLH                (325),
        .TWLO                (9000),
        .TAA_MIN             (15000),
        .CL_TIME             (15000),
        .TDQSCK_DLLDIS       (400),
        .TRRD                (10000),
        .TFAW                (40000),
        .CL_MIN              (5),
        .CL_MAX              (14),
        .AL_MIN              (0),
        .AL_MAX              (2),
        .WR_MIN              (5),
        .WR_MAX              (16),
        .BL_MIN              (4),
        .BL_MAX              (8),
        .CWL_MIN             (5),
        .CWL_MAX             (10),
        .TCK_MAX             (3300),
        .TCH_AVG_MIN         (0.47),
        .TCL_AVG_MIN         (0.47),
        .TCH_AVG_MAX         (0.53),
        .TCL_AVG_MAX         (0.53),
        .TCH_ABS_MIN         (0.43),
        .TCL_ABS_MIN         (0.43),
        .TCKE_TCK            (3),
        .TAA_MAX             (20000),
        .TQH                 (0.38),
        .TRPRE               (0.90),
        .TRPST               (0.30),
        .TDQSH               (0.45),
        .TDQSL               (0.45),
        .TWPRE               (0.90),
        .TWPST               (0.30),
        .TCCD                (4),
        .TCCD_DG             (2),
        .TRAS_MAX            (60e9),
        .TWR                 (15000),
        .TMRD                (4),
        .TMOD                (15000),
        .TMOD_TCK            (12),
        .TRRD_TCK            (4),
        .TRRD_DG             (3000),
        .TRRD_DG_TCK         (2),
        .TRTP                (7500),
        .TRTP_TCK            (4),
        .TWTR                (7500),
        .TWTR_DG             (3750),
        .TWTR_TCK            (4),
        .TWTR_DG_TCK         (2),
        .TDLLK               (512),
        .TRFC_MIN            (260000),
        .TRFC_MAX            (70200000),
        .TXP_TCK             (3),
        .TXPDLL              (24000),
        .TXPDLL_TCK          (10),
        .TACTPDEN            (1),
        .TPRPDEN             (1),
        .TREFPDEN            (1),
        .TCPDED              (1),
        .TPD_MAX             (70200000),
        .TXPR                (270000),
        .TXPR_TCK            (5),
        .TXS                 (270000),
        .TXS_TCK             (5),
        .TXSDLL              (512),
        .TISXR               (350),
        .TCKSRE              (10000),
        .TCKSRE_TCK          (5),
        .TCKSRX              (10000),
        .TCKSRX_TCK          (5),
        .TCKESR_TCK          (4),
        .TAOF                (0.7),
        .TAONPD              (8500),
        .TAOFPD              (8500),
        .ODTH4               (4),
        .ODTH8               (6),
        .TADC                (0.7),
        .TWLMRD              (40),
        .TWLDQSEN            (25),
        .TWLOE               (2000),
        .DM_BITS             (2),
        .ADDR_BITS           (15),
        .ROW_BITS            (15),
        .COL_BITS            (10),
        .DQ_BITS             (16),
        .DQS_BITS            (2),
        .BA_BITS             (3),
        .MEM_BITS            (10),
        .AP                  (10),
        .BC                  (12),
        .BL_BITS             (3),
        .BO_BITS             (2),
        .CS_BITS             (1),
        .RANKS               (1),
        .RZQ                 (240),
        .PRE_DEF_PAT         (8'hAA),
        .STOP_ON_ERROR       (1),
        .DEBUG               (1),
        .BUS_DELAY           (0),
        .RANDOM_OUT_DELAY    (0),
        .RANDOM_SEED         (31913),
        .RDQSEN_PRE          (2),
        .RDQSEN_PST          (1),
        .RDQS_PRE            (2),
        .RDQS_PST            (1),
        .RDQEN_PRE           (0),
        .RDQEN_PST           (0),
        .WDQS_PRE            (2),
        .WDQS_PST            (1),
        .check_strict_mrbits (1),
        .check_strict_timing (1),
        .feature_pasr        (1),
        .feature_truebl4     (0),
        .feature_odt_hi      (0),
        .PERTCKAVG           (512),
        .LOAD_MODE           (4'b0000),
        .REFRESH             (4'b0001),
        .PRECHARGE           (4'b0010),
        .ACTIVATE            (4'b0011),
        .WRITE               (4'b0100),
        .READ                (4'b0101),
        .ZQ                  (4'b0110),
        .NOP                 (4'b0111),
        .PWR_DOWN            (4'b1000),
        .SELF_REF            (4'b1001),
        .RFF_BITS            (128),
        .RFF_CHUNK           (32),
        .SAME_BANK           (2'd0),
        .DIFF_BANK           (2'd1),
        .DIFF_GROUP          (2'd2),
        .SIMUL_500US         (5),
        .SIMUL_200US         (2)
    ) ddr3_i (
        .rst_n   (SDRST),         // input 
        .ck      (SDCLK),         // input 
        .ck_n    (SDNCLK),        // input 
        .cke     (SDCKE),         // input 
        .cs_n    (1'b0),          // input 
        .ras_n   (SDRAS),         // input 
        .cas_n   (SDCAS),         // input 
        .we_n    (SDWE),          // input 
        .dm_tdqs ({SDDMU,SDDML}), // inout[1:0] 
        .ba      (SDBA[2:0]),     // input[2:0] 
        .addr    (SDA[14:0]),     // input[14:0] 
        .dq      (SDD[15:0]),     // inout[15:0] 
        .dqs     ({DQSU,DQSL}),   // inout[1:0] 
        .dqs_n   ({NDQSU,NDQSL}), // inout[1:0] 
        .tdqs_n  (),              // output[1:0] 
        .odt     (SDODT)          // input 
    );
    
    
// Simulation modules    
simul_axi_master_rdaddr
#(
  .ID_WIDTH(12),
  .ADDRESS_WIDTH(32),
  .LATENCY(AXI_RDADDR_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.5),
  .VALID_DELAY(4.0)
) simul_axi_master_rdaddr_i (
    .clk(CLK),
    .reset(RST),
    .arid_in(ARID_IN[11:0]),
    .araddr_in(ARADDR_IN[31:0]),
    .arlen_in(ARLEN_IN[3:0]),
    .arsize_in(ARSIZE_IN[2:0]),
    .arburst_in(ARBURST_IN[1:0]),
    .arcache_in(4'b0),
    .arprot_in(3'b0), //     .arprot_in(2'b0),
    .arid(arid[11:0]),
    .araddr(araddr[31:0]),
    .arlen(arlen[3:0]),
    .arsize(arsize[2:0]),
    .arburst(arburst[1:0]),
    .arcache(arcache[3:0]),
    .arprot(arprot[2:0]),
    .arvalid(arvalid),
    .arready(arready),
    .set_cmd(AR_SET_CMD),  // latch all other input data at posedge of clock
    .ready(AR_READY)     // command/data FIFO can accept command
);

simul_axi_master_wraddr
#(
  .ID_WIDTH(12),
  .ADDRESS_WIDTH(32),
  .LATENCY(AXI_WRADDR_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.5),
  .VALID_DELAY(4.0)
) simul_axi_master_wraddr_i (
    .clk(CLK),
    .reset(RST),
    .awid_in(AWID_IN[11:0]),
    .awaddr_in(AWADDR_IN[31:0]),
    .awlen_in(AWLEN_IN[3:0]),
    .awsize_in(AWSIZE_IN[2:0]),
    .awburst_in(AWBURST_IN[1:0]),
    .awcache_in(4'b0),
    .awprot_in(3'b0), //.awprot_in(2'b0),
    .awid(awid[11:0]),
    .awaddr(awaddr[31:0]),
    .awlen(awlen[3:0]),
    .awsize(awsize[2:0]),
    .awburst(awburst[1:0]),
    .awcache(awcache[3:0]),
    .awprot(awprot[2:0]),
    .awvalid(awvalid),
    .awready(awready),
    .set_cmd(AW_SET_CMD),  // latch all other input data at posedge of clock
    .ready(AW_READY)     // command/data FIFO can accept command
);

simul_axi_master_wdata
#(
  .ID_WIDTH(12),
  .DATA_WIDTH(32),
  .WSTB_WIDTH(4),
  .LATENCY(AXI_WRDATA_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.2),
  .VALID_DELAY(3.6)
) simul_axi_master_wdata_i (
    .clk(CLK),
    .reset(RST),
    .wid_in(WID_IN[11:0]),
    .wdata_in(WDATA_IN[31:0]),
    .wstrb_in(WSTRB_IN[3:0]),
    .wlast_in(WLAST_IN),
    .wid(wid[11:0]),
    .wdata(wdata[31:0]),
    .wstrb(wstrb[3:0]),
    .wlast(wlast),
    .wvalid(wvalid),
    .wready(wready),
    .set_cmd(W_SET_CMD),  // latch all other input data at posedge of clock
    .ready(W_READY)        // command/data FIFO can accept command
);

simul_axi_slow_ready simul_axi_slow_ready_read_i(
    .clk(CLK),
    .reset(RST), //input         reset,
    .delay(RD_LAG), //input  [3:0]  delay,
    .valid(rvalid), // input         valid,
    .ready(rready)  //output        ready
    );

simul_axi_slow_ready simul_axi_slow_ready_write_resp_i(
    .clk(CLK),
    .reset(RST), //input         reset,
    .delay(B_LAG), //input  [3:0]  delay,
    .valid(bvalid), // input       ADDRESS_NUMBER+2:0  valid,
    .ready(bready)  //output        ready
    );

933 934 935
simul_axi_read #(
    .ADDRESS_WIDTH(SIMUL_AXI_READ_WIDTH)
  ) simul_axi_read_i(
936 937 938 939
  .clk(CLK),
  .reset(RST),
  .last(rlast),
  .data_stb(rstb),
940
  .raddr(ARADDR_IN[SIMUL_AXI_READ_WIDTH+1:2]), 
941 942
  .rlen(ARLEN_IN),
  .rcmd(AR_SET_CMD),
943
  .addr_out(SIMUL_AXI_ADDR_W[SIMUL_AXI_READ_WIDTH-1:0]),
944 945 946 947 948 949 950
  .burst(),     // burst in progress - just debug
  .err_out());  // data last does not match predicted or FIFO over/under run - just debug
    
    //  wire [ 3:0] SIMUL_ADD_ADDR; 
    always @ (posedge CLK) begin
        if      (RST) SIMUL_AXI_FULL <=0;
        else if (rstb) SIMUL_AXI_FULL <=1;
951 952 953 954 955 956
        
        if (RST) begin
              NUM_WORDS_READ <= 0;
        end else if (rstb) begin
            NUM_WORDS_READ <= NUM_WORDS_READ + 1; 
        end    
957 958 959 960 961 962 963 964 965 966 967 968 969 970
        if (rstb) begin
            SIMUL_AXI_ADDR <= SIMUL_AXI_ADDR_W;
            SIMUL_AXI_READ <= rdata;
`ifdef DEBUG_RD_DATA
        $display (" Read data (addr:data): 0x%x:0x%x @%t",SIMUL_AXI_ADDR_W,rdata,$time);
`endif  
            
        end 
        
    end
    
    
// SuppressWarnings VEditor all - these variables are just for viewing, not used anywhere else
  reg DEBUG1, DEBUG2, DEBUG3;
Andrey Filippov's avatar
Andrey Filippov committed
971 972
  reg [11:0] GLOBAL_WRITE_ID=0;
  reg [11:0] GLOBAL_READ_ID=0;
973 974 975 976 977 978 979 980 981
  reg [7:0] target_phase=0; // to compare/wait for phase shifter ready
  
   task set_up;
        begin
// set dq /dqs tristate on/off patterns
            axi_set_tristate_patterns;
// set patterns for DM (always 0) and DQS - always the same (may try different for write lev.)
            axi_set_dqs_dqm_patterns;
// prepare all sequences
982
            set_all_sequences;
983
// prepare write buffer    
984
            write_block_buf_chn(0,0,256); // fill block memory (channel, page, number)
985 986
// set all delays
//#axi_set_delays - from tables, per-pin
987 988 989 990
`ifdef SET_PER_PIN_DEALYS
            axi_set_delays; // set all individual delays, aslo runs axi_set_phase()
`else
            axi_set_same_delays(DLY_DQ_IDELAY,DLY_DQ_ODELAY,DLY_DQS_IDELAY,DLY_DQS_ODELAY,DLY_DM_ODELAY,DLY_CMDA_ODELAY);
991 992
// set clock phase relative to DDR clk
            axi_set_phase(DLY_PHASE);
993 994
`endif            
            
995 996 997
        end
    endtask

998 999 1000 1001 1002
// tasks - when tested - move to includes

task test_write_levelling; // SuppressThisWarning VEditor - may be unused
  begin
// Set special values for DQS idelay for write leveling
1003
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // not no interrupt running cycle - delays are changed immediately
1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014
        axi_set_dqs_idelay_wlv;
// Set write buffer (from DDR3) WE signal delay for write leveling mode
        axi_set_wbuf_delay(WBUF_DLY_WLV);
        axi_set_dqs_odelay('h80); // 'h80 - inverted, 'h60 - not - 'h80 will cause warnings during simulation
        schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        WRITELEV_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        0,                 // input [1:0] page;     // buffer page number
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
                        
1015
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1016 1017 1018 1019 1020 1021 1022 1023 1024
        read_block_buf_chn (0, 0, 32, 1 ); // chn=0, page=0, number of 32-bit words=32, wait_done
//        @ (negedge rstb);
        axi_set_dqs_odelay(DLY_DQS_ODELAY);
        schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        WRITELEV_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        1,                 // input [1:0] page;     // buffer page number
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1025
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044
        read_block_buf_chn (0, 1, 32, 1 ); // chn=0, page=1, number of 32-bit words=32, wait_done
//    task wait_read_queue_empty; - alternative way to check fo empty read queue
        
//        @ (negedge rstb);
        axi_set_dqs_idelay_nominal;
//        axi_set_dqs_odelay_nominal;
        axi_set_dqs_odelay('h78);
        axi_set_wbuf_delay(WBUF_DLY_DFLT); //DFLT_WBUF_DELAY
   end
endtask

task test_read_pattern; // SuppressThisWarning VEditor - may be unused
    begin  
        schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        READ_PATTERN_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        2,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1045
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059
        read_block_buf_chn (0, 2, 32, 1 ); // chn=0, page=2, number of 32-bit words=32, wait_done
    end
endtask

task test_write_block; // SuppressThisWarning VEditor - may be unused
    begin
//    write_block_buf_chn; // fill block memory - already set in set_up task
        schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        WRITE_BLOCK_OFFSET,    // input [9:0] seq_addr; // sequence start address
                        0,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        1,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
// tempoary - for debugging:
1060
//        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083
    end
endtask

task test_read_block; // SuppressThisWarning VEditor - may be unused
    begin
        schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        3,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
        schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        2,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
        schedule_ps_pio ( // shedule software-control memory operation (may need to check FIFO status first)
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        1,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1084
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167
        read_block_buf_chn (0, 3, 256, 1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
    end
endtask

task test_scanline_write; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input            [1:0] extra_pages;
    input                  wait_done;
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    
    integer       ii;
    begin
        $display("====== test_scanline_write: channel=%d, extra_pages=%d,  wait_done=%d @%t",
                                              channel,    extra_pages,     wait_done,   $time);
        case (channel)
            1:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
                end
            3:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 1 and 3 are valid");
                start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
            end
        endcase
        mode=   func_encode_mode_scanline(
                    extra_pages,
                    1, // write_mem,
                    1, // enable
                    0);  // chn_reset
                
        write_contol_register(start_addr+ MCNTRL_SCANLINE_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH,        WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0,      WINDOW_X0+ (WINDOW_Y0<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY,   SCANLINE_STARTX+(SCANLINE_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_MODE,             mode); 
        configure_channel_priority(channel,0);    // lowest priority channel 3
//        enable_memcntrl_channels(16'h000b); // channels 0,1,3 are enabled
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
        for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
// VDT bugs: 1:does not propagate undefined width through ?:, 2: - does not allow to connect it to task integer input, 3: shows integer input width as 1  
            SCANLINE_XFER_SIZE= ((SCANLINE_PAGES_PER_ROW>1)?
                (
                    (
                        ((ii % SCANLINE_PAGES_PER_ROW) < (SCANLINE_PAGES_PER_ROW-1))?
                        (1<<NUM_XFER_BITS):
                        (WINDOW_WIDTH % (1<<NUM_XFER_BITS))
                    )
                ):
                (WINDOW_WIDTH));
           write_block_scanline_chn(
            channel,
            (ii & 3),
            SCANLINE_XFER_SIZE,
            WINDOW_X0 + ((ii % SCANLINE_PAGES_PER_ROW)<<NUM_XFER_BITS),  // SCANLINE_CUR_X,
            WINDOW_Y0 + (ii / SCANLINE_PAGES_PER_ROW)); // SCANLINE_CUR_Y);\
            
        end
        for (ii=0;ii< (WINDOW_HEIGHT * SCANLINE_PAGES_PER_ROW) ;ii = ii+1) begin // here assuming 1 page per line
            if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
                wait_status_condition (
                    status_address, //MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                    status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                    DEFAULT_STATUS_MODE,
                    (ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
                    'hf << 16,  // mask for the 4-bit page number
1168 1169
                    1, // not equal to
                    (ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195
                SCANLINE_XFER_SIZE= ((SCANLINE_PAGES_PER_ROW>1)?
                    (
                        (
                            ((ii % SCANLINE_PAGES_PER_ROW) < (SCANLINE_PAGES_PER_ROW-1))?
                        
                         (1<<NUM_XFER_BITS):
                            (WINDOW_WIDTH % (1<<NUM_XFER_BITS))
                        )
                    ):
                    (WINDOW_WIDTH));
                write_block_scanline_chn(
                    channel,
                    (ii & 3),
                SCANLINE_XFER_SIZE,
                WINDOW_X0 + ((ii % SCANLINE_PAGES_PER_ROW)<<NUM_XFER_BITS),  // SCANLINE_CUR_X,
                WINDOW_Y0 + (ii / SCANLINE_PAGES_PER_ROW)); // SCANLINE_CUR_Y);
            end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
        if (wait_done) begin
            wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
                2 << STATUS_2LSB_SHFT,  // mask for the 4-bit page number
1196 1197
                0, // equal to
                0); // no need to synchronize sequence number
1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269
//     enable_memcntrl_en_dis(channel,0); // disable channel
        end
    end
endtask

task test_scanline_read; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input            [1:0] extra_pages;
    input                  show_data;
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    integer       ii;
    begin
        $display("====== test_scanline_read: channel=%d, extra_pages=%d,  show_data=%d @%t",
                                             channel,    extra_pages,     show_data,    $time);
        case (channel)
            1:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
                end
            3:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 1 and 3 are valid");
                start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
            end
        endcase
        mode=   func_encode_mode_scanline(
                    extra_pages,
                    0, // write_mem,
                    1, // enable
                    0);  // chn_reset

   // program to the
        write_contol_register(start_addr + MCNTRL_SCANLINE_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH,        WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0,      WINDOW_X0+ (WINDOW_Y0<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY,   SCANLINE_STARTX+(SCANLINE_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
        for (ii=0;ii<(WINDOW_HEIGHT * SCANLINE_PAGES_PER_ROW);ii = ii+1) begin
            SCANLINE_XFER_SIZE= ((SCANLINE_PAGES_PER_ROW>1)?
                (
                    (
                        ((ii % SCANLINE_PAGES_PER_ROW) < (SCANLINE_PAGES_PER_ROW-1))?
                        (1<<NUM_XFER_BITS):
                        (WINDOW_WIDTH % (1<<NUM_XFER_BITS))
                    )
                ):
                (WINDOW_WIDTH));
            wait_status_condition (
                status_address, //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                (ii) << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
                'hf << 16,  // mask for the 4-bit page number
1270 1271
                 1, // not equal to
                 (ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357
// read block (if needed), for now just sikip  
                if (show_data) begin 
                read_block_buf_chn (
                    channel,
                    (ii & 3),
                    SCANLINE_XFER_SIZE <<2,
                    1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
                end
        write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
    end
  end  
endtask

task test_tiled_write; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input                  byte32;
    input                  keep_open;
    input            [1:0] extra_pages;
    input                  wait_done;
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    
    integer       ii;
    begin
        $display("====== test_tiled_write: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d,  wait_done=%d @%t",
                                           channel,    byte32,    keep_open,    extra_pages,     wait_done,   $time);
        case (channel)
            2:  begin
                    start_addr=             MCNTRL_TILED_CHN2_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
                end
            4:  begin
                    start_addr=             MCNTRL_TILED_CHN4_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 2 and 4 are valid");
                start_addr=             MCNTRL_TILED_CHN2_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
            end
        endcase
        mode=   func_encode_mode_tiled(
                    byte32,
                    keep_open,
                    extra_pages,
                    1, // write_mem,
                    1, // enable
                    0);  // chn_reset
        write_contol_register(start_addr + MCNTRL_TILED_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH,        WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0,      WINDOW_X0+ (WINDOW_Y0<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY,   TILED_STARTX+(TILED_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS,         TILE_WIDTH+(TILE_HEIGHT<<8)+(TILE_VSTEP<<16));
        write_contol_register(start_addr + MCNTRL_TILED_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
    
        for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
            write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
                channel, // channel
                (ii & 3),
                TILE_SIZE,
                WINDOW_X0 + ((ii % TILES_PER_ROW) * TILE_WIDTH),
                WINDOW_Y0 + (ii / TILE_ROWS_PER_WINDOW)); // SCANLINE_CUR_Y);\
        end
    
        for (ii=0;ii<(TILES_PER_ROW * TILE_ROWS_PER_WINDOW);ii = ii+1) begin
            if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
                wait_status_condition (
                    status_address, // MCNTRL_TEST01_STATUS_REG_CHN5_ADDR,
                    status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN5_STATUS_CNTRL,
                    DEFAULT_STATUS_MODE,
                    (ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
                    'hf << 16,  // mask for the 4-bit page number
1358 1359
                    1, // not equal to
                    (ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375
                write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
                    channel, // channel
                    (ii & 3),
                    TILE_SIZE,
                    WINDOW_X0 + ((ii % TILES_PER_ROW) * TILE_WIDTH),
                    WINDOW_Y0 + (ii / TILE_ROWS_PER_WINDOW)); // SCANLINE_CUR_Y);\
            end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
        if (wait_done) begin
            wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
                2 << STATUS_2LSB_SHFT,  // mask for the 4-bit page number
1376 1377
                0, // equal to
                0); // no need to synchronize sequence number
1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446
//     enable_memcntrl_en_dis(channel,0); // disable channel
        end
    end  
endtask



task test_tiled_read; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input                  byte32;
    input                  keep_open;
    input            [1:0] extra_pages;
    input                  show_data;
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    
    integer       ii;
    begin
        $display("====== test_tiled_read: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d,  show_data=%d @%t",
                                          channel,      byte32,  keep_open,    extra_pages,     show_data,   $time);
        case (channel)
            2:  begin
                    start_addr=             MCNTRL_TILED_CHN2_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
                end
            4:  begin
                    start_addr=             MCNTRL_TILED_CHN4_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 2 and 4 are valid");
                start_addr=             MCNTRL_TILED_CHN2_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
            end
        endcase
        mode=   func_encode_mode_tiled(
                    byte32,
                    keep_open,
                    extra_pages,
                    0, // write_mem,
                    1, // enable
                    0);  // chn_reset
        write_contol_register(start_addr + MCNTRL_TILED_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH,        WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0,      WINDOW_X0+ (WINDOW_Y0<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY,   TILED_STARTX+(TILED_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS,         TILE_WIDTH+(TILE_HEIGHT<<8)+(TILE_VSTEP<<16));
        write_contol_register(start_addr + MCNTRL_TILED_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
        for (ii=0;ii<(TILES_PER_ROW * TILE_ROWS_PER_WINDOW);ii = ii+1) begin
            wait_status_condition (
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN4_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                ii << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
                'hf << 16,  // mask for the 4-bit page number
1447 1448
                1, // not equal to
                (ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467
                if (show_data) begin 
                read_block_buf_chn (
                    channel,
                    (ii & 3),
                    TILE_SIZE <<2,
                    1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
                end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
//     enable_memcntrl_en_dis(channel,0); // disable channel
    end  
endtask







1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494
task set_all_sequences;
        begin
            $display("SET MRS @ %t",$time);    
            set_mrs(1);
            $display("SET REFRESH @ %t",$time);    
            set_refresh(
                50, // input [ 9:0] t_rfc; // =50 for tCK=2.5ns
                16); //input [ 7:0] t_refi; // 48/97 for normal, 8 - for simulation
            $display("SET WRITE LEVELING @ %t",$time);    
            set_write_lev(16); // write leveling, 16 times   (full buffer - 128) 
            $display("SET READ PATTERN @ %t",$time);    
            set_read_pattern(8); // 8x2*64 bits, 32x32 bits to read
            $display("SET WRITE BLOCK @ %t",$time);    
            set_write_block(
                3'h5,     // bank
                15'h1234, // row address
                10'h100   // column address
            );
           
            $display("SET READ BLOCK @ %t",$time);    
            set_read_block(
                3'h5,     // bank
                15'h1234, // row address
                10'h100   // column address
            );
        end
endtask
Andrey Filippov's avatar
Andrey Filippov committed
1495

1496
task write_block_scanline_chn;  // S uppressThisWarning VEditor : may be unused
1497 1498
//    input integer chn; // buffer channel
    input   [3:0] chn; // buffer channel
1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509
    input   [1:0] page;
//    input integer num_words; // number of words to write (will be rounded up to multiple of 16)
    input [NUM_XFER_BITS:0] num_bursts; // number of 8-bursts to write (will be rounded up to multiple of 16)
    input integer startX;
    input integer startY;
    reg    [29:0] start_addr;
    integer num_words;
    begin
//        $display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_words, $time);
        $display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_bursts, $time);
        case (chn)
1510
            0:  start_addr=MCONTR_BUF0_WR_ADDR + (page << 8);
1511
            1:  start_addr=MCONTR_BUF1_WR_ADDR + (page << 8);
1512
            2:  start_addr=MCONTR_BUF2_WR_ADDR + (page << 8);
1513
            3:  start_addr=MCONTR_BUF3_WR_ADDR + (page << 8);
1514
            4:  start_addr=MCONTR_BUF4_WR_ADDR + (page << 8);
1515 1516
            default: begin
                $display("**** ERROR: Invalid channel for write_block_scanline_chn = %d @%t", chn, $time);
1517
                start_addr = MCONTR_BUF0_WR_ADDR+ (page << 8);
1518 1519 1520 1521 1522 1523 1524 1525
            end
        endcase
        num_words=num_bursts << 2;
        write_block_incremtal (start_addr, num_words, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
//        write_block_incremtal (start_addr, num_bursts << 2, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
    end
endtask

1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561
function [6:0] func_encode_mode_tiled;
    input       byte32; // 32-byte columns (0 - 16-byte columns)
    input       keep_open; // for 8 or less rows - do not close page between accesses
    input [1:0] extra_pages; // number of extra pages that need to stay (not to be overwritten) in the buffer
                             // can be used for overlapping tile read access
    input       write_mem;   // write to memory mode (0 - read from memory)
    input       enable;      // enable requests from this channel ( 0 will let current to finish, but not raise want/need)
    input       chn_reset;       // immediately reset al;l the internal circuitry
    begin
        func_encode_mode_tiled={byte32,keep_open,extra_pages,write_mem,enable,~chn_reset};
    end           
endfunction
function [4:0] func_encode_mode_scanline;
    input [1:0] extra_pages; // number of extra pages that need to stay (not to be overwritten) in the buffer
                             // can be used for overlapping tile read access
    input       write_mem;   // write to memory mode (0 - read from memory)
    input       enable;      // enable requests from this channel ( 0 will let current to finish, but not raise want/need)
    input       chn_reset;       // immediately reset al;l the internal circuitry
    begin
        func_encode_mode_scanline={extra_pages,write_mem,enable,~chn_reset};
    end           
endfunction
/*
task enable_memcntrl_en_dis;
    input [3:0] chn;
    input       en;
    begin
        if (en) begin
            ENABLED_CHANNELS = ENABLED_CHANNELS | (1<<chn);
        end else begin
            ENABLED_CHANNELS = ENABLED_CHANNELS & ~(1<<chn);
        end
        write_contol_register(MCONTR_TOP_16BIT_ADDR +  MCONTR_TOP_16BIT_CHN_EN, {16'b0,ENABLED_CHANNELS});
    end
endtask
*/
Andrey Filippov's avatar
Andrey Filippov committed
1562

1563 1564 1565
`include "includes/x393_tasks_mcntrl_en_dis_priority.vh"
`include "includes/x393_tasks_mcntrl_buffers.vh"
`include "includes/x393_tasks_pio_sequences.vh"
1566
`include "includes/x393_tasks_mcntrl_timing.vh"
1567 1568
`include "includes/x393_tasks_ps_pio.vh"
`include "includes/x393_tasks_status.vh"
1569
`include "includes/x393_tasks01.vh"
1570
`include "includes/x393_mcontr_encode_cmd.vh"
1571 1572
endmodule