x393_testbench01.tf 94.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
/*******************************************************************************
 * Module: x393_testbench01
 * Date:2015-02-06  
 * Author: andrey     
 * Description: testbench for the initial x393.v simulation
 *
 * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
 * x393_testbench01.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 *  x393_testbench01.tf is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *******************************************************************************/
`timescale 1ns/1ps
22 23
`include "system_defines.vh"

24
//`define use200Mhz 1
25
//`define DEBUG_FIFO 1
26
`undef WAIT_MRS
27
`define SET_PER_PIN_DELAYS 1 // set individual (including per-DQ pin delays)
28 29
`define PS_PIO_WAIT_COMPLETE 0 // wait until PS PIO module finished transaction before starting a new one
// Disabled already passed test to speedup simulation
30 31
//`define TEST_WRITE_LEVELLING 1
//`define TEST_READ_PATTERN 1
32 33
//`define TEST_WRITE_BLOCK 1
//`define TEST_READ_BLOCK 1
34
//`define TEST_SCANLINE_WRITE
35
    `define TEST_SCANLINE_WRITE_WAIT 1 // wait TEST_SCANLINE_WRITE finished (frame_done)
36
//`define TEST_SCANLINE_READ
37
    `define TEST_READ_SHOW  1
38
//`define TEST_TILED_WRITE  1
39
    `define TEST_TILED_WRITE_WAIT 1 // wait TEST_SCANLINE_WRITE finished (frame_done)
40
//`define TEST_TILED_READ  1
41

Andrey Filippov's avatar
Andrey Filippov committed
42 43 44 45 46
//`define TEST_TILED_WRITE32  1
//`define TEST_TILED_READ32  1

`define TEST_AFI_WRITE 1
`define TEST_AFI_READ 1
47

48
module  x393_testbench01 #(
49
`include "includes/x393_parameters.vh" // SuppressThisWarning VEditor - not used
50 51 52 53 54 55 56 57 58 59 60 61
`include "includes/x393_simulation_parameters.vh"
)(
);
`ifdef IVERILOG              
//    $display("IVERILOG is defined");
    `include "IVERILOG_INCLUDE.v"
`else
//    $display("IVERILOG is not defined");
    parameter lxtname = "x393.lxt";
`endif
`define DEBUG_WR_SINGLE 1  
`define DEBUG_RD_DATA 1  
62 63
//`include "includes/x393_cur_params_sim.vh" // parameters that may need adjustment, should be before x393_localparams.vh
`include "includes/x393_cur_params_target.vh" // SuppressThisWarning VEditor - not used parameters that may need adjustment, should be before x393_localparams.vh
64
`include "includes/x393_localparams.vh" // SuppressThisWarning VEditor - not used
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82
  // DDR3 signals
  wire        SDRST;
  wire        SDCLK;  // output
  wire        SDNCLK; // output
  wire [ADDRESS_NUMBER-1:0] SDA;    // output[14:0] 
  wire [ 2:0] SDBA;   // output[2:0] 
  wire        SDWE;   // output
  wire        SDRAS;  // output
  wire        SDCAS;  // output
  wire        SDCKE;  // output
  wire        SDODT;  // output
  wire [15:0] SDD;    // inout[15:0] 
  wire        SDDML;  // inout
  wire        DQSL;   // inout
  wire        NDQSL;  // inout
  wire        SDDMU;  // inout
  wire        DQSU;   // inout
  wire        NDQSU;  // inout
83
  wire        DUMMY_TO_KEEP;  // output to keep PS7 signals from "optimization" // SuppressThisWarning all - not used
Andrey Filippov's avatar
Andrey Filippov committed
84
//  wire        MEMCLK;
85
  
86
// axi_hp simulation signals
Andrey Filippov's avatar
Andrey Filippov committed
87
  wire HCLK;
88
  wire [31:0] afi_sim_rd_address;    // output[31:0] 
Andrey Filippov's avatar
Andrey Filippov committed
89 90 91
  wire [ 5:0] afi_sim_rid;           // output[5:0]  SuppressThisWarning VEditor - not used - just view
//  reg         afi_sim_rd_valid;      // input
  wire        afi_sim_rd_valid;      // input
92
  wire        afi_sim_rd_ready;      // output
Andrey Filippov's avatar
Andrey Filippov committed
93 94 95 96 97 98 99 100 101
//  reg  [63:0] afi_sim_rd_data;       // input[63:0] 
  wire [63:0] afi_sim_rd_data;       // input[63:0] 
  wire [ 2:0] afi_sim_rd_cap;        // output[2:0]  SuppressThisWarning VEditor - not used - just view
  wire [ 3:0] afi_sim_rd_qos;        // output[3:0]  SuppressThisWarning VEditor - not used - just view
  wire  [ 1:0] afi_sim_rd_resp;       // input[1:0] 
//  reg  [ 1:0] afi_sim_rd_resp;       // input[1:0] 

  wire [31:0] afi_sim_wr_address;    // output[31:0] SuppressThisWarning VEditor - not used - just view
  wire [ 5:0] afi_sim_wid;           // output[5:0]  SuppressThisWarning VEditor - not used - just view
102
  wire        afi_sim_wr_valid;      // output
Andrey Filippov's avatar
Andrey Filippov committed
103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118
  wire        afi_sim_wr_ready;      // input
//  reg         afi_sim_wr_ready;      // input
  wire [63:0] afi_sim_wr_data;       // output[63:0] SuppressThisWarning VEditor - not used - just view
  wire [ 7:0] afi_sim_wr_stb;        // output[7:0]  SuppressThisWarning VEditor - not used - just view
  wire [ 3:0] afi_sim_bresp_latency; // input[3:0] 
//  reg  [ 3:0] afi_sim_bresp_latency; // input[3:0] 
  wire [ 2:0] afi_sim_wr_cap;        // output[2:0]  SuppressThisWarning VEditor - not used - just view
  wire [ 3:0] afi_sim_wr_qos;        // output[3:0]  SuppressThisWarning VEditor - not used - just view

  assign HCLK = x393_i.ps7_i.SAXIHP0ACLK; // shortcut name
// afi loopback
  assign #1 afi_sim_rd_data= {2'h0,afi_sim_rd_address[31:3],1'h1,  2'h0,afi_sim_rd_address[31:3],1'h0};
  assign #1 afi_sim_rd_valid = afi_sim_rd_ready;
  assign #1 afi_sim_rd_resp = afi_sim_rd_ready?2'b0:2'bx;
  assign #1 afi_sim_wr_ready = afi_sim_wr_valid;
  assign #1 afi_sim_bresp_latency=4'h5; 
119
  
Andrey Filippov's avatar
Andrey Filippov committed
120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
// axi_hp register access
  // PS memory mapped registers to read/write over a separate simulation bus running at HCLK, no waits
  reg  [31:0] PS_REG_ADDR;
  reg         PS_REG_WR;
  reg         PS_REG_RD;
  reg  [31:0] PS_REG_DIN;
  wire [31:0] PS_REG_DOUT;
  reg  [31:0] PS_RDATA;  // SuppressThisWarning VEditor - not used - just view
/*  
  reg  [31:0] afi_reg_addr; 
  reg         afi_reg_wr;
  reg         afi_reg_rd;
  reg  [31:0] afi_reg_din;
  wire [31:0] afi_reg_dout;
  reg  [31:0] AFI_REG_RD; // SuppressThisWarning VEditor - not used - just view
*/  
  initial begin
    PS_REG_ADDR <= 'bx;
    PS_REG_WR   <= 0;
    PS_REG_RD   <= 0;
    PS_REG_DIN  <= 'bx;
    PS_RDATA    <= 'bx;
  end 
  always @ (posedge HCLK) if (PS_REG_RD) PS_RDATA <= PS_REG_DOUT;
144
  
145
  reg [639:0] TEST_TITLE;
146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
  // Simulation signals
  reg [11:0] ARID_IN_r;
  reg [31:0] ARADDR_IN_r;
  reg  [3:0] ARLEN_IN_r;
  reg  [2:0] ARSIZE_IN_r;
  reg  [1:0] ARBURST_IN_r;
  reg [11:0] AWID_IN_r;
  reg [31:0] AWADDR_IN_r;
  reg  [3:0] AWLEN_IN_r;
  reg  [2:0] AWSIZE_IN_r;
  reg  [1:0] AWBURST_IN_r;

  reg [11:0] WID_IN_r;
  reg [31:0] WDATA_IN_r;
  reg [ 3:0] WSTRB_IN_r;
  reg        WLAST_IN_r;
  
  reg [11:0] LAST_ARID; // last issued ARID

  // SuppressWarnings VEditor : assigned in $readmem() system task
166
  wire [SIMUL_AXI_READ_WIDTH-1:0] SIMUL_AXI_ADDR_W;
167 168 169 170 171
  // SuppressWarnings VEditor
  wire        SIMUL_AXI_MISMATCH;
  // SuppressWarnings VEditor
  reg  [31:0] SIMUL_AXI_READ;
  // SuppressWarnings VEditor
172
  reg  [SIMUL_AXI_READ_WIDTH-1:0] SIMUL_AXI_ADDR;
173 174
  // SuppressWarnings VEditor
  reg         SIMUL_AXI_FULL; // some data available
175
  wire        SIMUL_AXI_EMPTY= ~rvalid && rready && (rid==LAST_ARID); //SuppressThisWarning VEditor : may be unused, just for simulation // use it to wait for?
176
  reg  [31:0] registered_rdata; // here read data from tasks goes
177 178
  // SuppressWarnings VEditor
  reg         WAITING_STATUS;   // tasks are waiting for status
179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259

  reg        CLK;
  reg        RST;
  reg        AR_SET_CMD_r;
  wire       AR_READY;

  reg        AW_SET_CMD_r;
  wire       AW_READY;

  reg        W_SET_CMD_r;
  wire       W_READY;

  wire [11:0]  #(AXI_TASK_HOLD) ARID_IN = ARID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) ARADDR_IN = ARADDR_IN_r;
  wire  [3:0]  #(AXI_TASK_HOLD) ARLEN_IN = ARLEN_IN_r;
  wire  [2:0]  #(AXI_TASK_HOLD) ARSIZE_IN = ARSIZE_IN_r;
  wire  [1:0]  #(AXI_TASK_HOLD) ARBURST_IN = ARBURST_IN_r;
  wire [11:0]  #(AXI_TASK_HOLD) AWID_IN = AWID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) AWADDR_IN = AWADDR_IN_r;
  wire  [3:0]  #(AXI_TASK_HOLD) AWLEN_IN = AWLEN_IN_r;
  wire  [2:0]  #(AXI_TASK_HOLD) AWSIZE_IN = AWSIZE_IN_r;
  wire  [1:0]  #(AXI_TASK_HOLD) AWBURST_IN = AWBURST_IN_r;
  wire [11:0]  #(AXI_TASK_HOLD) WID_IN = WID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) WDATA_IN = WDATA_IN_r;
  wire [ 3:0]  #(AXI_TASK_HOLD) WSTRB_IN = WSTRB_IN_r;
  wire         #(AXI_TASK_HOLD) WLAST_IN = WLAST_IN_r;
  wire         #(AXI_TASK_HOLD) AR_SET_CMD = AR_SET_CMD_r;
  wire         #(AXI_TASK_HOLD) AW_SET_CMD = AW_SET_CMD_r;
  wire         #(AXI_TASK_HOLD) W_SET_CMD =  W_SET_CMD_r;

  reg  [3:0] RD_LAG;  // ready signal lag in axi read channel (0 - RDY=1, 1..15 - RDY is asserted N cycles after valid)   
  reg  [3:0] B_LAG;   // ready signal lag in axi arete response channel (0 - RDY=1, 1..15 - RDY is asserted N cycles after valid)   

// Simulation modules interconnection
  wire [11:0] arid;
  wire [31:0] araddr;
  wire [3:0]  arlen;
  wire [2:0]  arsize;
  wire [1:0]  arburst;
  // SuppressWarnings VEditor : assigned in $readmem(14) system task
  wire [3:0]  arcache;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [2:0]  arprot;
  wire        arvalid;
  wire        arready;

  wire [11:0] awid;
  wire [31:0] awaddr;
  wire [3:0]  awlen;
  wire [2:0]  awsize;
  wire [1:0]  awburst;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [3:0]  awcache;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [2:0]  awprot;
  wire        awvalid;
  wire        awready;

  wire [11:0] wid;
  wire [31:0] wdata;
  wire [3:0]  wstrb;
  wire        wlast;
  wire        wvalid;
  wire        wready;
  
  wire [31:0] rdata;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [11:0] rid;
  wire        rlast;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire  [1:0] rresp;
  wire        rvalid;
  wire        rready;
  wire        rstb=rvalid && rready;

  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire  [1:0] bresp;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [11:0] bid;
  wire        bvalid;
  wire        bready;
260 261
  integer     NUM_WORDS_READ;
  integer     NUM_WORDS_EXPECTED;
262
  reg  [15:0] ENABLED_CHANNELS = 0; // currently enabled memory channels
263 264
//  integer     SCANLINE_CUR_X;
//  integer     SCANLINE_CUR_Y;
265
  wire AXI_RD_EMPTY=NUM_WORDS_READ==NUM_WORDS_EXPECTED; //SuppressThisWarning VEditor : may be unused, just for simulation
266
  
267 268
  
  
269
  //NUM_XFER_BITS=6
270 271 272
//  localparam       SCANLINE_PAGES_PER_ROW= (WINDOW_WIDTH>>NUM_XFER_BITS)+((WINDOW_WIDTH[NUM_XFER_BITS-1:0]==0)?0:1);
//  localparam       TILES_PER_ROW= (WINDOW_WIDTH/TILE_WIDTH)+  ((WINDOW_WIDTH % TILE_WIDTH==0)?0:1);
//  localparam       TILE_ROWS_PER_WINDOW= ((WINDOW_HEIGHT-1)/TILE_VSTEP) + 1;
273
  
274
//  localparam       TILE_SIZE= TILE_WIDTH*TILE_HEIGHT;
275 276
  
  
277
//  localparam  integer     SCANLINE_FULL_XFER= 1<<NUM_XFER_BITS; // 64 - full page transfer in 8-bursts
278
//  localparam  integer     SCANLINE_LAST_XFER= WINDOW_WIDTH % (1<<NUM_XFER_BITS); // last page transfer size in a row
279
  
280
//  integer ii;
281
//  integer  SCANLINE_XFER_SIZE;
282
always #(CLKIN_PERIOD/2) CLK = ~CLK;
283 284 285 286 287 288 289 290 291 292 293 294 295 296
  initial begin
`ifdef IVERILOG              
    $display("IVERILOG is defined");
`else
    $display("IVERILOG is not defined");
`endif

`ifdef ICARUS              
    $display("ICARUS is defined");
`else
    $display("ICARUS is not defined");
`endif
    $dumpfile(lxtname);
  // SuppressWarnings VEditor : assigned in $readmem() system task
Andrey Filippov's avatar
Andrey Filippov committed
297
    $dumpvars(0,x393_testbench01);
298 299 300 301 302
    CLK =1'b0;
    RST = 1'bx;
    AR_SET_CMD_r = 1'b0;
    AW_SET_CMD_r = 1'b0;
    W_SET_CMD_r = 1'b0;
303 304 305
    #500;
//    $display ("x393_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.rst=%d",x393_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.rst);
    #500;
306 307 308 309
    RST = 1'b1;
    NUM_WORDS_EXPECTED =0;
//    #99000; // same as glbl
    #9000; // same as glbl
310
    repeat (20) @(posedge CLK) ;
311
    RST =1'b0;
312 313 314
//set simulation-only parameters   
    axi_set_b_lag(0); //(1);
    axi_set_rd_lag(0);
315
    program_status_all(DEFAULT_STATUS_MODE,'h2a); // mode auto with sequence number increment 
Andrey Filippov's avatar
Andrey Filippov committed
316 317

    enable_memcntrl(1);                 // enable memory controller
Andrey Filippov's avatar
Andrey Filippov committed
318

319
    set_up;
320 321
    axi_set_wbuf_delay(WBUF_DLY_DFLT); //DFLT_WBUF_DELAY - used in synth. code
    
Andrey Filippov's avatar
Andrey Filippov committed
322 323 324 325 326 327 328 329 330 331 332 333
    wait_phase_shifter_ready;
    read_all_status;
// enable output for address/commands to DDR chip    
    enable_cmda(1);
    repeat (16) @(posedge CLK) ;
// remove reset from DDR chip    
    activate_sdrst(0); // was enabled at system reset

    #5000; // actually 500 usec required
    repeat (16) @(posedge CLK) ;
    enable_cke(1);
    repeat (16) @(posedge CLK) ;
Andrey Filippov's avatar
Andrey Filippov committed
334 335 336 337 338 339 340
    
//    enable_memcntrl(1);                 // enable memory controller
    enable_memcntrl_channels(16'h0003); // only channel 0 and 1 are enabled
    configure_channel_priority(0,0);    // lowest priority channel 0
    configure_channel_priority(1,0);    // lowest priority channel 1
    enable_reset_ps_pio(1,0);           // enable, no reset

341
// set MR registers in DDR3 memory, run DCI calibration (long)
342
    wait_ps_pio_ready(DEFAULT_STATUS_MODE, 1); // wait FIFO not half full 
343
    schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
Andrey Filippov's avatar
Andrey Filippov committed
344 345
                        INITIALIZE_OFFSET, // input [9:0] seq_addr; // sequence start address
                        0,                 // input [1:0] page;     // buffer page number
346
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
347 348 349
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
                        
350 351
   
`ifdef WAIT_MRS 
352
    wait_ps_pio_done(DEFAULT_STATUS_MODE, 1);
353
`else    
Andrey Filippov's avatar
Andrey Filippov committed
354
    repeat (32) @(posedge CLK) ;  // what delay is needed to be sure? Add to PS_PIO?
355 356
//    first refreshes will be fast (accummulated while waiting)
`endif    
Andrey Filippov's avatar
Andrey Filippov committed
357
    enable_refresh(1);
358
    axi_set_dqs_odelay('h78); //??? dafaults - wrong?
359
    axi_set_dqs_odelay_nominal;
360
    
361
`ifdef TEST_WRITE_LEVELLING 
362 363
    TEST_TITLE = "WRITE_LEVELLING";
    $display("===================== TEST_%s =========================",TEST_TITLE);
364
    test_write_levelling;
365
`endif
366
`ifdef TEST_READ_PATTERN
367 368
    TEST_TITLE = "READ_PATTERN";
    $display("===================== TEST_%s =========================",TEST_TITLE);
369
    test_read_pattern;
370 371
`endif
`ifdef TEST_WRITE_BLOCK
372 373
    TEST_TITLE = "WRITE_BLOCK";
    $display("===================== TEST_%s =========================",TEST_TITLE);
374
    test_write_block;
375 376
`endif
`ifdef TEST_READ_BLOCK
377 378
    TEST_TITLE = "READ_BLOCK";
    $display("===================== TEST_%s =========================",TEST_TITLE);
379
    test_read_block;
380
`endif
381
`ifdef TESTL_SHORT_SCANLINE
382 383
    TEST_TITLE = "TESTL_SHORT_SCANLINE";
    $display("===================== TEST_%s =========================",TEST_TITLE);
384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438
    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  wait_done;
        1, //WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  show_data;
        1, // WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);

    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  wait_done;
        2, //WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  show_data;
        2, // WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);

    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  wait_done;
        3, //WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  show_data;
        3, // WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);



`endif

439
`ifdef TEST_SCANLINE_WRITE
440 441
    TEST_TITLE = "SCANLINE_WRITE";
    $display("===================== TEST_%s =========================",TEST_TITLE);
442
    test_scanline_write(
Andrey Filippov's avatar
Andrey Filippov committed
443
        3, // valid: 1 or 3 input            [3:0] channel; now - 3 only, 1 is for afi
444
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
445 446 447 448 449 450
        1, // input                  wait_done;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
        
451
`endif
452
`ifdef TEST_SCANLINE_READ
453 454
    TEST_TITLE = "SCANLINE_READ";
    $display("===================== TEST_%s =========================",TEST_TITLE);
455
    test_scanline_read (
Andrey Filippov's avatar
Andrey Filippov committed
456
        3, // valid: 1 or 3 input            [3:0] channel; now - 3 only, 1 is for afi
457
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
458 459 460 461 462 463
        1, // input                  show_data;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
        
464 465
`endif

466
`ifdef TEST_TILED_WRITE
467 468
    TEST_TITLE = "TILED_WRITE";
    $display("===================== TEST_%s =========================",TEST_TITLE);
469 470 471 472 473
    test_tiled_write (
         2,                 // [3:0] channel;
         0,                 //       byte32;
         TILED_KEEP_OPEN,   //       keep_open;
         TILED_EXTRA_PAGES, //       extra_pages;
474 475 476 477 478 479 480 481
         1,                //       wait_done;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
482 483
`endif

484
`ifdef TEST_TILED_READ
485 486
    TEST_TITLE = "TILED_READ";
    $display("===================== TEST_%s =========================",TEST_TITLE);
487
    test_tiled_read (
488 489 490 491 492 493 494 495 496 497 498 499 500
        2,                 // [3:0] channel;
        0,                 //       byte32;
        TILED_KEEP_OPEN,   //       keep_open;
        TILED_EXTRA_PAGES, //       extra_pages;
        1,                 //       show_data;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
         
501 502
`endif

503
`ifdef TEST_TILED_WRITE32
504 505
    TEST_TITLE = "TILED_WRITE32";
    $display("===================== TEST_%s =========================",TEST_TITLE);
506
    test_tiled_write (
507
        2, // 4, // 2,                 // [3:0] channel;
508 509 510 511 512 513 514 515 516 517 518
        1,                 //       byte32;
        TILED_KEEP_OPEN,   //       keep_open;
        TILED_EXTRA_PAGES, //       extra_pages;
        1,                 //       wait_done;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
519 520 521
`endif

`ifdef TEST_TILED_READ32
522 523
    TEST_TITLE = "TILED_READ32";
    $display("===================== TEST_%s =========================",TEST_TITLE);
524
    test_tiled_read (
525
        2, // 4, //2,                 // [3:0] channel;
526 527 528 529 530 531 532 533 534 535 536
        1,                 //       byte32;
        TILED_KEEP_OPEN,   //       keep_open;
        TILED_EXTRA_PAGES, //       extra_pages;
        1,                 //       show_data;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
537
`endif
Andrey Filippov's avatar
Andrey Filippov committed
538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575

`ifdef TEST_AFI_WRITE
    TEST_TITLE = "AFI_WRITE";
    $display("===================== TEST_%s =========================",TEST_TITLE);
    test_afi_rw (
       1, // write_ddr3;
       SCANLINE_EXTRA_PAGES,//  extra_pages;
       FRAME_START_ADDRESS, //  input [21:0] frame_start_addr;
       FRAME_FULL_WIDTH,    // input [15:0] window_full_width; // 13 bit - in 8*16=128 bit bursts
       WINDOW_WIDTH,        // input [15:0] window_width;  // 13 bit - in 8*16=128 bit bursts
       WINDOW_HEIGHT,       // input [15:0] window_height; // 16 bit (only 14 are used here)
       WINDOW_X0,           // input [15:0] window_left;
       WINDOW_Y0,           // input [15:0] window_top;
       0,                   // input [28:0] start64;  // relative start adderss of the transfer (set to 0 when writing lo_addr64)
       AFI_LO_ADDR64,       // input [28:0] lo_addr64; // low address of the system memory range, in 64-bit words 
       AFI_SIZE64,          // input [28:0] size64;    // size of the system memory range in 64-bit words
       0);                  // input        continue;    // 0 start from start64, 1 - continue from where it was
`endif


`ifdef TEST_AFI_READ
    TEST_TITLE = "AFI_READ";
    $display("===================== TEST_%s =========================",TEST_TITLE);
    test_afi_rw (
       0, // write_ddr3;
       SCANLINE_EXTRA_PAGES,//  extra_pages;
       FRAME_START_ADDRESS, //  input [21:0] frame_start_addr;
       FRAME_FULL_WIDTH,    // input [15:0] window_full_width; // 13 bit - in 8*16=128 bit bursts
       WINDOW_WIDTH,        // input [15:0] window_width;  // 13 bit - in 8*16=128 bit bursts
       WINDOW_HEIGHT,       // input [15:0] window_height; // 16 bit (only 14 are used here)
       WINDOW_X0,           // input [15:0] window_left;
       WINDOW_Y0,           // input [15:0] window_top;
       0,                   // input [28:0] start64;  // relative start adderss of the transfer (set to 0 when writing lo_addr64)
       AFI_LO_ADDR64,       // input [28:0] lo_addr64; // low address of the system memory range, in 64-bit words 
       AFI_SIZE64,          // input [28:0] size64;    // size of the system memory range in 64-bit words
       0);                  // input        continue;    // 0 start from start64, 1 - continue from where it was
`endif

576 577
  TEST_TITLE = "ALL_DONE";
  $display("===================== TEST_%s =========================",TEST_TITLE);
578
  #20000;
579
  $finish;
580 581 582
end
// protect from never end
  initial begin
583 584
     #200000;
//     #50000;
585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639
    $display("finish testbench 2");
  $finish;
  end



assign x393_i.ps7_i.FCLKCLK=        {4{CLK}};
assign x393_i.ps7_i.FCLKRESETN=     {RST,~RST,RST,~RST};
// Read address
assign x393_i.ps7_i.MAXIGP0ARADDR=  araddr;
assign x393_i.ps7_i.MAXIGP0ARVALID= arvalid;
assign arready=                            x393_i.ps7_i.MAXIGP0ARREADY;
assign x393_i.ps7_i.MAXIGP0ARID=    arid; 
assign x393_i.ps7_i.MAXIGP0ARLEN=   arlen;
assign x393_i.ps7_i.MAXIGP0ARSIZE=  arsize[1:0]; // arsize[2] is not used
assign x393_i.ps7_i.MAXIGP0ARBURST= arburst;
// Read data
assign rdata=                              x393_i.ps7_i.MAXIGP0RDATA; 
assign rvalid=                             x393_i.ps7_i.MAXIGP0RVALID;
assign x393_i.ps7_i.MAXIGP0RREADY=  rready;
assign rid=                                x393_i.ps7_i.MAXIGP0RID;
assign rlast=                              x393_i.ps7_i.MAXIGP0RLAST;
assign rresp=                              x393_i.ps7_i.MAXIGP0RRESP;
// Write address
assign x393_i.ps7_i.MAXIGP0AWADDR=  awaddr;
assign x393_i.ps7_i.MAXIGP0AWVALID= awvalid;

assign awready=                            x393_i.ps7_i.MAXIGP0AWREADY;

//assign awready= AWREADY_AAAA;
assign x393_i.ps7_i.MAXIGP0AWID=awid;

      // SuppressWarnings VEditor all
//  wire [ 1:0] AWLOCK;
      // SuppressWarnings VEditor all
//  wire [ 3:0] AWCACHE;
      // SuppressWarnings VEditor all
//  wire [ 2:0] AWPROT;
assign x393_i.ps7_i.MAXIGP0AWLEN=   awlen;
assign x393_i.ps7_i.MAXIGP0AWSIZE=  awsize[1:0]; // awsize[2] is not used
assign x393_i.ps7_i.MAXIGP0AWBURST= awburst;
      // SuppressWarnings VEditor all
//  wire [ 3:0] AWQOS;
// Write data
assign x393_i.ps7_i.MAXIGP0WDATA=   wdata;
assign x393_i.ps7_i.MAXIGP0WVALID=  wvalid;
assign wready=                             x393_i.ps7_i.MAXIGP0WREADY;
assign x393_i.ps7_i.MAXIGP0WID=     wid;
assign x393_i.ps7_i.MAXIGP0WLAST=   wlast;
assign x393_i.ps7_i.MAXIGP0WSTRB=   wstrb;
// Write responce
assign bvalid=                             x393_i.ps7_i.MAXIGP0BVALID;
assign x393_i.ps7_i.MAXIGP0BREADY=  bready;
assign bid=                                x393_i.ps7_i.MAXIGP0BID;
assign bresp=                              x393_i.ps7_i.MAXIGP0BRESP;
640
//TODO: See how to show problems in include files opened in the editor (test all top *.v files that have it)
641 642 643 644 645 646
// Top module under test
    x393 #(
        .MCONTR_WR_MASK                    (MCONTR_WR_MASK),
        .MCONTR_RD_MASK                    (MCONTR_RD_MASK),
        .MCONTR_CMD_WR_ADDR                (MCONTR_CMD_WR_ADDR),
        .MCONTR_BUF0_RD_ADDR               (MCONTR_BUF0_RD_ADDR),
647
        .MCONTR_BUF0_WR_ADDR               (MCONTR_BUF0_WR_ADDR),
648 649
//        .MCONTR_BUF1_RD_ADDR               (MCONTR_BUF1_RD_ADDR),
//        .MCONTR_BUF1_WR_ADDR               (MCONTR_BUF1_WR_ADDR),
650
        .MCONTR_BUF2_RD_ADDR               (MCONTR_BUF2_RD_ADDR),
651 652
        .MCONTR_BUF2_WR_ADDR               (MCONTR_BUF2_WR_ADDR),
        .MCONTR_BUF3_RD_ADDR               (MCONTR_BUF3_RD_ADDR),
653 654
        .MCONTR_BUF3_WR_ADDR               (MCONTR_BUF3_WR_ADDR),
        .MCONTR_BUF4_RD_ADDR               (MCONTR_BUF4_RD_ADDR),
655
        .MCONTR_BUF4_WR_ADDR               (MCONTR_BUF4_WR_ADDR),
656 657 658 659 660 661 662
        .CONTROL_ADDR                      (CONTROL_ADDR),
        .CONTROL_ADDR_MASK                 (CONTROL_ADDR_MASK),
        .STATUS_ADDR                       (STATUS_ADDR),
        .STATUS_ADDR_MASK                  (STATUS_ADDR_MASK),
        .AXI_WR_ADDR_BITS                  (AXI_WR_ADDR_BITS),
        .AXI_RD_ADDR_BITS                  (AXI_RD_ADDR_BITS),
        .STATUS_DEPTH                      (STATUS_DEPTH),
663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757
        .DLY_LD                            (DLY_LD),
        .DLY_LD_MASK                       (DLY_LD_MASK),
        .MCONTR_PHY_0BIT_ADDR              (MCONTR_PHY_0BIT_ADDR),
        .MCONTR_PHY_0BIT_ADDR_MASK         (MCONTR_PHY_0BIT_ADDR_MASK),
        .MCONTR_PHY_0BIT_DLY_SET           (MCONTR_PHY_0BIT_DLY_SET),
        .MCONTR_PHY_0BIT_CMDA_EN           (MCONTR_PHY_0BIT_CMDA_EN),
        .MCONTR_PHY_0BIT_SDRST_ACT         (MCONTR_PHY_0BIT_SDRST_ACT),
        .MCONTR_PHY_0BIT_CKE_EN            (MCONTR_PHY_0BIT_CKE_EN),
        .MCONTR_PHY_0BIT_DCI_RST           (MCONTR_PHY_0BIT_DCI_RST),
        .MCONTR_PHY_0BIT_DLY_RST           (MCONTR_PHY_0BIT_DLY_RST),
        .MCONTR_TOP_0BIT_ADDR              (MCONTR_TOP_0BIT_ADDR),
        .MCONTR_TOP_0BIT_ADDR_MASK         (MCONTR_TOP_0BIT_ADDR_MASK),
        .MCONTR_TOP_0BIT_MCONTR_EN         (MCONTR_TOP_0BIT_MCONTR_EN),
        .MCONTR_TOP_0BIT_REFRESH_EN        (MCONTR_TOP_0BIT_REFRESH_EN),
        .MCONTR_PHY_16BIT_ADDR             (MCONTR_PHY_16BIT_ADDR),
        .MCONTR_PHY_16BIT_ADDR_MASK        (MCONTR_PHY_16BIT_ADDR_MASK),
        .MCONTR_PHY_16BIT_PATTERNS         (MCONTR_PHY_16BIT_PATTERNS),
        .MCONTR_PHY_16BIT_PATTERNS_TRI     (MCONTR_PHY_16BIT_PATTERNS_TRI),
        .MCONTR_PHY_16BIT_WBUF_DELAY       (MCONTR_PHY_16BIT_WBUF_DELAY),
        .MCONTR_PHY_16BIT_EXTRA            (MCONTR_PHY_16BIT_EXTRA),
        .MCONTR_PHY_STATUS_CNTRL           (MCONTR_PHY_STATUS_CNTRL),
        .MCONTR_ARBIT_ADDR                 (MCONTR_ARBIT_ADDR),
        .MCONTR_ARBIT_ADDR_MASK            (MCONTR_ARBIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_ADDR             (MCONTR_TOP_16BIT_ADDR),
        .MCONTR_TOP_16BIT_ADDR_MASK        (MCONTR_TOP_16BIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_CHN_EN           (MCONTR_TOP_16BIT_CHN_EN),
        .MCONTR_TOP_16BIT_REFRESH_PERIOD   (MCONTR_TOP_16BIT_REFRESH_PERIOD),
        .MCONTR_TOP_16BIT_REFRESH_ADDRESS  (MCONTR_TOP_16BIT_REFRESH_ADDRESS),
        .MCONTR_TOP_16BIT_STATUS_CNTRL     (MCONTR_TOP_16BIT_STATUS_CNTRL),
        .MCONTR_PHY_STATUS_REG_ADDR        (MCONTR_PHY_STATUS_REG_ADDR),
        .MCONTR_TOP_STATUS_REG_ADDR        (MCONTR_TOP_STATUS_REG_ADDR),
        .CHNBUF_READ_LATENCY               (CHNBUF_READ_LATENCY),
        .DFLT_DQS_PATTERN                  (DFLT_DQS_PATTERN),
        .DFLT_DQM_PATTERN                  (DFLT_DQM_PATTERN),
        .DFLT_DQ_TRI_ON_PATTERN            (DFLT_DQ_TRI_ON_PATTERN),
        .DFLT_DQ_TRI_OFF_PATTERN           (DFLT_DQ_TRI_OFF_PATTERN),
        .DFLT_DQS_TRI_ON_PATTERN           (DFLT_DQS_TRI_ON_PATTERN),
        .DFLT_DQS_TRI_OFF_PATTERN          (DFLT_DQS_TRI_OFF_PATTERN),
        .DFLT_WBUF_DELAY                   (DFLT_WBUF_DELAY),
        .DFLT_INV_CLK_DIV                  (DFLT_INV_CLK_DIV),
        .DFLT_CHN_EN                       (DFLT_CHN_EN),
        .DFLT_REFRESH_ADDR                 (DFLT_REFRESH_ADDR),
        .DFLT_REFRESH_PERIOD               (DFLT_REFRESH_PERIOD),
        .ADDRESS_NUMBER                    (ADDRESS_NUMBER),
        .COLADDR_NUMBER                    (COLADDR_NUMBER),
        .PHASE_WIDTH                       (PHASE_WIDTH),
        .SLEW_DQ                           (SLEW_DQ),
        .SLEW_DQS                          (SLEW_DQS),
        .SLEW_CMDA                         (SLEW_CMDA),
        .SLEW_CLK                          (SLEW_CLK),
        .IBUF_LOW_PWR                      (IBUF_LOW_PWR),
        .REFCLK_FREQUENCY                  (REFCLK_FREQUENCY),
        .HIGH_PERFORMANCE_MODE             (HIGH_PERFORMANCE_MODE),
        .CLKIN_PERIOD                      (CLKIN_PERIOD),
        .CLKFBOUT_MULT                     (CLKFBOUT_MULT),
        .CLKFBOUT_MULT_REF                 (CLKFBOUT_MULT_REF),
        .CLKFBOUT_DIV_REF                  (CLKFBOUT_DIV_REF),
        .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
        .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
        .SDCLK_PHASE                       (SDCLK_PHASE),
        .CLK_PHASE                         (CLK_PHASE),
        .CLK_DIV_PHASE                     (CLK_DIV_PHASE),
        .MCLK_PHASE                        (MCLK_PHASE),
        .REF_JITTER1                       (REF_JITTER1),
        .SS_EN                             (SS_EN),
        .SS_MODE                           (SS_MODE),
        .SS_MOD_PERIOD                     (SS_MOD_PERIOD),
        .CMD_PAUSE_BITS                    (CMD_PAUSE_BITS),
        .CMD_DONE_BIT                      (CMD_DONE_BIT),
        .NUM_CYCLES_LOW_BIT                (NUM_CYCLES_LOW_BIT),
        .NUM_CYCLES_00                     (NUM_CYCLES_00),
        .NUM_CYCLES_01                     (NUM_CYCLES_01),
        .NUM_CYCLES_02                     (NUM_CYCLES_02),
        .NUM_CYCLES_03                     (NUM_CYCLES_03),
        .NUM_CYCLES_04                     (NUM_CYCLES_04),
        .NUM_CYCLES_05                     (NUM_CYCLES_05),
        .NUM_CYCLES_06                     (NUM_CYCLES_06),
        .NUM_CYCLES_07                     (NUM_CYCLES_07),
        .NUM_CYCLES_08                     (NUM_CYCLES_08),
        .NUM_CYCLES_09                     (NUM_CYCLES_09),
        .NUM_CYCLES_10                     (NUM_CYCLES_10),
        .NUM_CYCLES_11                     (NUM_CYCLES_11),
        .NUM_CYCLES_12                     (NUM_CYCLES_12),
        .NUM_CYCLES_13                     (NUM_CYCLES_13),
        .NUM_CYCLES_14                     (NUM_CYCLES_14),
        .NUM_CYCLES_15                     (NUM_CYCLES_15),
        .MCNTRL_PS_ADDR                    (MCNTRL_PS_ADDR),
        .MCNTRL_PS_MASK                    (MCNTRL_PS_MASK),
        .MCNTRL_PS_STATUS_REG_ADDR         (MCNTRL_PS_STATUS_REG_ADDR),
        .MCNTRL_PS_EN_RST                  (MCNTRL_PS_EN_RST),
        .MCNTRL_PS_CMD                     (MCNTRL_PS_CMD),
        .MCNTRL_PS_STATUS_CNTRL            (MCNTRL_PS_STATUS_CNTRL),
        .NUM_XFER_BITS                     (NUM_XFER_BITS),
        .FRAME_WIDTH_BITS                  (FRAME_WIDTH_BITS),
        .FRAME_HEIGHT_BITS                 (FRAME_HEIGHT_BITS),
758
        .MCNTRL_SCANLINE_CHN1_ADDR         (MCNTRL_SCANLINE_CHN1_ADDR),
759 760 761 762 763 764 765 766 767
        .MCNTRL_SCANLINE_CHN3_ADDR         (MCNTRL_SCANLINE_CHN3_ADDR),
        .MCNTRL_SCANLINE_MASK              (MCNTRL_SCANLINE_MASK),
        .MCNTRL_SCANLINE_MODE              (MCNTRL_SCANLINE_MODE),
        .MCNTRL_SCANLINE_STATUS_CNTRL      (MCNTRL_SCANLINE_STATUS_CNTRL),
        .MCNTRL_SCANLINE_STARTADDR         (MCNTRL_SCANLINE_STARTADDR),
        .MCNTRL_SCANLINE_FRAME_FULL_WIDTH  (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
        .MCNTRL_SCANLINE_WINDOW_WH         (MCNTRL_SCANLINE_WINDOW_WH),
        .MCNTRL_SCANLINE_WINDOW_X0Y0       (MCNTRL_SCANLINE_WINDOW_X0Y0),
        .MCNTRL_SCANLINE_WINDOW_STARTXY    (MCNTRL_SCANLINE_WINDOW_STARTXY),
768
        .MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR),
769 770
        .MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR),
        .MCNTRL_SCANLINE_PENDING_CNTR_BITS (MCNTRL_SCANLINE_PENDING_CNTR_BITS),
771
        .MCNTRL_SCANLINE_FRAME_PAGE_RESET  (MCNTRL_SCANLINE_FRAME_PAGE_RESET),
772 773
        .MAX_TILE_WIDTH                    (MAX_TILE_WIDTH),
        .MAX_TILE_HEIGHT                   (MAX_TILE_HEIGHT),
774
        .MCNTRL_TILED_CHN2_ADDR            (MCNTRL_TILED_CHN2_ADDR),
775 776 777 778 779 780 781 782 783
        .MCNTRL_TILED_CHN4_ADDR            (MCNTRL_TILED_CHN4_ADDR),
        .MCNTRL_TILED_MASK                 (MCNTRL_TILED_MASK),
        .MCNTRL_TILED_MODE                 (MCNTRL_TILED_MODE),
        .MCNTRL_TILED_STATUS_CNTRL         (MCNTRL_TILED_STATUS_CNTRL),
        .MCNTRL_TILED_STARTADDR            (MCNTRL_TILED_STARTADDR),
        .MCNTRL_TILED_FRAME_FULL_WIDTH     (MCNTRL_TILED_FRAME_FULL_WIDTH),
        .MCNTRL_TILED_WINDOW_WH            (MCNTRL_TILED_WINDOW_WH),
        .MCNTRL_TILED_WINDOW_X0Y0          (MCNTRL_TILED_WINDOW_X0Y0),
        .MCNTRL_TILED_WINDOW_STARTXY       (MCNTRL_TILED_WINDOW_STARTXY),
784 785
        .MCNTRL_TILED_TILE_WHS             (MCNTRL_TILED_TILE_WHS),
        .MCNTRL_TILED_STATUS_REG_CHN2_ADDR (MCNTRL_TILED_STATUS_REG_CHN2_ADDR),
786 787 788 789 790 791
        .MCNTRL_TILED_STATUS_REG_CHN4_ADDR (MCNTRL_TILED_STATUS_REG_CHN4_ADDR),
        .MCNTRL_TILED_PENDING_CNTR_BITS    (MCNTRL_TILED_PENDING_CNTR_BITS),
        .MCNTRL_TILED_FRAME_PAGE_RESET     (MCNTRL_TILED_FRAME_PAGE_RESET),
        .BUFFER_DEPTH32                    (BUFFER_DEPTH32),
        .MCNTRL_TEST01_ADDR                 (MCNTRL_TEST01_ADDR),
        .MCNTRL_TEST01_MASK                 (MCNTRL_TEST01_MASK),
792 793
        .MCNTRL_TEST01_CHN1_MODE            (MCNTRL_TEST01_CHN1_MODE),
        .MCNTRL_TEST01_CHN1_STATUS_CNTRL    (MCNTRL_TEST01_CHN1_STATUS_CNTRL),
794 795 796 797 798 799
        .MCNTRL_TEST01_CHN2_MODE            (MCNTRL_TEST01_CHN2_MODE),
        .MCNTRL_TEST01_CHN2_STATUS_CNTRL    (MCNTRL_TEST01_CHN2_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN3_MODE            (MCNTRL_TEST01_CHN3_MODE),
        .MCNTRL_TEST01_CHN3_STATUS_CNTRL    (MCNTRL_TEST01_CHN3_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN4_MODE            (MCNTRL_TEST01_CHN4_MODE),
        .MCNTRL_TEST01_CHN4_STATUS_CNTRL    (MCNTRL_TEST01_CHN4_STATUS_CNTRL),
800
        .MCNTRL_TEST01_STATUS_REG_CHN1_ADDR (MCNTRL_TEST01_STATUS_REG_CHN1_ADDR),
801 802
        .MCNTRL_TEST01_STATUS_REG_CHN2_ADDR (MCNTRL_TEST01_STATUS_REG_CHN2_ADDR),
        .MCNTRL_TEST01_STATUS_REG_CHN3_ADDR (MCNTRL_TEST01_STATUS_REG_CHN3_ADDR),
803
        .MCNTRL_TEST01_STATUS_REG_CHN4_ADDR (MCNTRL_TEST01_STATUS_REG_CHN4_ADDR)
804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821
    ) x393_i (
        .SDRST   (SDRST), // DDR3 reset (active low)
        .SDCLK   (SDCLK), // output 
        .SDNCLK  (SDNCLK), // outputread_and_wait(BASEADDR_STATUS)
        .SDA     (SDA[14:0]), // output[14:0] 
        .SDBA    (SDBA[2:0]), // output[2:0] 
        .SDWE    (SDWE), // output
        .SDRAS   (SDRAS), // output
        .SDCAS   (SDCAS), // output
        .SDCKE   (SDCKE), // output
        .SDODT   (SDODT), // output
        .SDD     (SDD[15:0]), // inout[15:0] 
        .SDDML   (SDDML), // inout
        .DQSL    (DQSL), // inout
        .NDQSL   (NDQSL), // inout
        .SDDMU   (SDDMU), // inout
        .DQSU    (DQSU), // inout
        .NDQSU   (NDQSU), // inout
Andrey Filippov's avatar
Andrey Filippov committed
822
        .DUMMY_TO_KEEP(DUMMY_TO_KEEP)  // to keep PS7 signals from "optimization"
823
      ,.MEMCLK  (1'b0)
824
    );
825 826 827 828 829 830 831 832 833 834
    // just to simplify extra delays in tri-state memory bus - provide output enable
    wire WRAP_MCLK=x393_i.mclk;
    wire [7:0] WRAP_PHY_DQ_TRI=x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dq_tri[7:0] ;
    wire [7:0] WRAP_PHY_DQS_TRI=x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dqs_tri[7:0] ;    
    //x393_i.mcntrl393_i.mcntrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dq_tri
    //x393_i.mcntrl393_i.mcntrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dqs_tri
`define USE_DDR3_WRAP 1    
`ifdef USE_DDR3_WRAP
    ddr3_wrap #(
        .ADDRESS_NUMBER     (ADDRESS_NUMBER),
835
        .TRISTATE_DELAY_CLK (4'h1), // total 2
836
        .TRISTATE_DELAY     (0),
837 838 839 840 841 842
        .CLK_DELAY          (1550),
        .CMDA_DELAY         (1550),
        .DQS_IN_DELAY       (3150),
        .DQ_IN_DELAY        (1550),
        .DQS_OUT_DELAY      (1550),
        .DQ_OUT_DELAY       (1550)
843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862
    ) ddr3_i (
        .mclk    (WRAP_MCLK), // input
        .dq_tri  ({WRAP_PHY_DQ_TRI[4],WRAP_PHY_DQ_TRI[0]}), // input[1:0] 
        .dqs_tri ({WRAP_PHY_DQS_TRI[4],WRAP_PHY_DQS_TRI[0]}), // input[1:0] 
        .SDRST   (SDRST), 
        .SDCLK   (SDCLK), 
        .SDNCLK  (SDNCLK), 
        .SDCKE   (SDCKE), 
        .SDRAS   (SDRAS), 
        .SDCAS   (SDCAS), 
        .SDWE    (SDWE), 
        .SDDMU   (SDDMU),
        .SDDML   (SDDML),
        .SDBA    (SDBA[2:0]),  
        .SDA     (SDA[ADDRESS_NUMBER-1:0]), 
        .SDD     (SDD[15:0]),  
        .DQSU    (DQSU),
        .NDQSU   (NDQSU),
        .DQSL    (DQSL),
        .NDQSL   (NDQSL),
863
        .SDODT   (SDODT)          // input 
864 865
    );
`else
866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051
    ddr3 #(
        .TCK_MIN             (2500), 
        .TJIT_PER            (100),
        .TJIT_CC             (200),
        .TERR_2PER           (147),
        .TERR_3PER           (175),
        .TERR_4PER           (194),
        .TERR_5PER           (209),
        .TERR_6PER           (222),
        .TERR_7PER           (232),
        .TERR_8PER           (241),
        .TERR_9PER           (249),
        .TERR_10PER          (257),
        .TERR_11PER          (263),
        .TERR_12PER          (269),
        .TDS                 (125),
        .TDH                 (150),
        .TDQSQ               (200),
        .TDQSS               (0.25),
        .TDSS                (0.20),
        .TDSH                (0.20),
        .TDQSCK              (400),
        .TQSH                (0.38),
        .TQSL                (0.38),
        .TDIPW               (600),
        .TIPW                (900),
        .TIS                 (350),
        .TIH                 (275),
        .TRAS_MIN            (37500),
        .TRC                 (52500),
        .TRCD                (15000),
        .TRP                 (15000),
        .TXP                 (7500),
        .TCKE                (7500),
        .TAON                (400),
        .TWLS                (325),
        .TWLH                (325),
        .TWLO                (9000),
        .TAA_MIN             (15000),
        .CL_TIME             (15000),
        .TDQSCK_DLLDIS       (400),
        .TRRD                (10000),
        .TFAW                (40000),
        .CL_MIN              (5),
        .CL_MAX              (14),
        .AL_MIN              (0),
        .AL_MAX              (2),
        .WR_MIN              (5),
        .WR_MAX              (16),
        .BL_MIN              (4),
        .BL_MAX              (8),
        .CWL_MIN             (5),
        .CWL_MAX             (10),
        .TCK_MAX             (3300),
        .TCH_AVG_MIN         (0.47),
        .TCL_AVG_MIN         (0.47),
        .TCH_AVG_MAX         (0.53),
        .TCL_AVG_MAX         (0.53),
        .TCH_ABS_MIN         (0.43),
        .TCL_ABS_MIN         (0.43),
        .TCKE_TCK            (3),
        .TAA_MAX             (20000),
        .TQH                 (0.38),
        .TRPRE               (0.90),
        .TRPST               (0.30),
        .TDQSH               (0.45),
        .TDQSL               (0.45),
        .TWPRE               (0.90),
        .TWPST               (0.30),
        .TCCD                (4),
        .TCCD_DG             (2),
        .TRAS_MAX            (60e9),
        .TWR                 (15000),
        .TMRD                (4),
        .TMOD                (15000),
        .TMOD_TCK            (12),
        .TRRD_TCK            (4),
        .TRRD_DG             (3000),
        .TRRD_DG_TCK         (2),
        .TRTP                (7500),
        .TRTP_TCK            (4),
        .TWTR                (7500),
        .TWTR_DG             (3750),
        .TWTR_TCK            (4),
        .TWTR_DG_TCK         (2),
        .TDLLK               (512),
        .TRFC_MIN            (260000),
        .TRFC_MAX            (70200000),
        .TXP_TCK             (3),
        .TXPDLL              (24000),
        .TXPDLL_TCK          (10),
        .TACTPDEN            (1),
        .TPRPDEN             (1),
        .TREFPDEN            (1),
        .TCPDED              (1),
        .TPD_MAX             (70200000),
        .TXPR                (270000),
        .TXPR_TCK            (5),
        .TXS                 (270000),
        .TXS_TCK             (5),
        .TXSDLL              (512),
        .TISXR               (350),
        .TCKSRE              (10000),
        .TCKSRE_TCK          (5),
        .TCKSRX              (10000),
        .TCKSRX_TCK          (5),
        .TCKESR_TCK          (4),
        .TAOF                (0.7),
        .TAONPD              (8500),
        .TAOFPD              (8500),
        .ODTH4               (4),
        .ODTH8               (6),
        .TADC                (0.7),
        .TWLMRD              (40),
        .TWLDQSEN            (25),
        .TWLOE               (2000),
        .DM_BITS             (2),
        .ADDR_BITS           (15),
        .ROW_BITS            (15),
        .COL_BITS            (10),
        .DQ_BITS             (16),
        .DQS_BITS            (2),
        .BA_BITS             (3),
        .MEM_BITS            (10),
        .AP                  (10),
        .BC                  (12),
        .BL_BITS             (3),
        .BO_BITS             (2),
        .CS_BITS             (1),
        .RANKS               (1),
        .RZQ                 (240),
        .PRE_DEF_PAT         (8'hAA),
        .STOP_ON_ERROR       (1),
        .DEBUG               (1),
        .BUS_DELAY           (0),
        .RANDOM_OUT_DELAY    (0),
        .RANDOM_SEED         (31913),
        .RDQSEN_PRE          (2),
        .RDQSEN_PST          (1),
        .RDQS_PRE            (2),
        .RDQS_PST            (1),
        .RDQEN_PRE           (0),
        .RDQEN_PST           (0),
        .WDQS_PRE            (2),
        .WDQS_PST            (1),
        .check_strict_mrbits (1),
        .check_strict_timing (1),
        .feature_pasr        (1),
        .feature_truebl4     (0),
        .feature_odt_hi      (0),
        .PERTCKAVG           (512),
        .LOAD_MODE           (4'b0000),
        .REFRESH             (4'b0001),
        .PRECHARGE           (4'b0010),
        .ACTIVATE            (4'b0011),
        .WRITE               (4'b0100),
        .READ                (4'b0101),
        .ZQ                  (4'b0110),
        .NOP                 (4'b0111),
        .PWR_DOWN            (4'b1000),
        .SELF_REF            (4'b1001),
        .RFF_BITS            (128),
        .RFF_CHUNK           (32),
        .SAME_BANK           (2'd0),
        .DIFF_BANK           (2'd1),
        .DIFF_GROUP          (2'd2),
        .SIMUL_500US         (5),
        .SIMUL_200US         (2)
    ) ddr3_i (
        .rst_n   (SDRST),         // input 
        .ck      (SDCLK),         // input 
        .ck_n    (SDNCLK),        // input 
        .cke     (SDCKE),         // input 
        .cs_n    (1'b0),          // input 
        .ras_n   (SDRAS),         // input 
        .cas_n   (SDCAS),         // input 
        .we_n    (SDWE),          // input 
        .dm_tdqs ({SDDMU,SDDML}), // inout[1:0] 
        .ba      (SDBA[2:0]),     // input[2:0] 
        .addr    (SDA[14:0]),     // input[14:0] 
        .dq      (SDD[15:0]),     // inout[15:0] 
        .dqs     ({DQSU,DQSL}),   // inout[1:0] 
        .dqs_n   ({NDQSU,NDQSL}), // inout[1:0] 
        .tdqs_n  (),              // output[1:0] 
        .odt     (SDODT)          // input 
    );
1052
`endif    
1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158
    
// Simulation modules    
simul_axi_master_rdaddr
#(
  .ID_WIDTH(12),
  .ADDRESS_WIDTH(32),
  .LATENCY(AXI_RDADDR_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.5),
  .VALID_DELAY(4.0)
) simul_axi_master_rdaddr_i (
    .clk(CLK),
    .reset(RST),
    .arid_in(ARID_IN[11:0]),
    .araddr_in(ARADDR_IN[31:0]),
    .arlen_in(ARLEN_IN[3:0]),
    .arsize_in(ARSIZE_IN[2:0]),
    .arburst_in(ARBURST_IN[1:0]),
    .arcache_in(4'b0),
    .arprot_in(3'b0), //     .arprot_in(2'b0),
    .arid(arid[11:0]),
    .araddr(araddr[31:0]),
    .arlen(arlen[3:0]),
    .arsize(arsize[2:0]),
    .arburst(arburst[1:0]),
    .arcache(arcache[3:0]),
    .arprot(arprot[2:0]),
    .arvalid(arvalid),
    .arready(arready),
    .set_cmd(AR_SET_CMD),  // latch all other input data at posedge of clock
    .ready(AR_READY)     // command/data FIFO can accept command
);

simul_axi_master_wraddr
#(
  .ID_WIDTH(12),
  .ADDRESS_WIDTH(32),
  .LATENCY(AXI_WRADDR_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.5),
  .VALID_DELAY(4.0)
) simul_axi_master_wraddr_i (
    .clk(CLK),
    .reset(RST),
    .awid_in(AWID_IN[11:0]),
    .awaddr_in(AWADDR_IN[31:0]),
    .awlen_in(AWLEN_IN[3:0]),
    .awsize_in(AWSIZE_IN[2:0]),
    .awburst_in(AWBURST_IN[1:0]),
    .awcache_in(4'b0),
    .awprot_in(3'b0), //.awprot_in(2'b0),
    .awid(awid[11:0]),
    .awaddr(awaddr[31:0]),
    .awlen(awlen[3:0]),
    .awsize(awsize[2:0]),
    .awburst(awburst[1:0]),
    .awcache(awcache[3:0]),
    .awprot(awprot[2:0]),
    .awvalid(awvalid),
    .awready(awready),
    .set_cmd(AW_SET_CMD),  // latch all other input data at posedge of clock
    .ready(AW_READY)     // command/data FIFO can accept command
);

simul_axi_master_wdata
#(
  .ID_WIDTH(12),
  .DATA_WIDTH(32),
  .WSTB_WIDTH(4),
  .LATENCY(AXI_WRDATA_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.2),
  .VALID_DELAY(3.6)
) simul_axi_master_wdata_i (
    .clk(CLK),
    .reset(RST),
    .wid_in(WID_IN[11:0]),
    .wdata_in(WDATA_IN[31:0]),
    .wstrb_in(WSTRB_IN[3:0]),
    .wlast_in(WLAST_IN),
    .wid(wid[11:0]),
    .wdata(wdata[31:0]),
    .wstrb(wstrb[3:0]),
    .wlast(wlast),
    .wvalid(wvalid),
    .wready(wready),
    .set_cmd(W_SET_CMD),  // latch all other input data at posedge of clock
    .ready(W_READY)        // command/data FIFO can accept command
);

simul_axi_slow_ready simul_axi_slow_ready_read_i(
    .clk(CLK),
    .reset(RST), //input         reset,
    .delay(RD_LAG), //input  [3:0]  delay,
    .valid(rvalid), // input         valid,
    .ready(rready)  //output        ready
    );

simul_axi_slow_ready simul_axi_slow_ready_write_resp_i(
    .clk(CLK),
    .reset(RST), //input         reset,
    .delay(B_LAG), //input  [3:0]  delay,
    .valid(bvalid), // input       ADDRESS_NUMBER+2:0  valid,
    .ready(bready)  //output        ready
    );

1159 1160 1161
simul_axi_read #(
    .ADDRESS_WIDTH(SIMUL_AXI_READ_WIDTH)
  ) simul_axi_read_i(
1162 1163 1164 1165
  .clk(CLK),
  .reset(RST),
  .last(rlast),
  .data_stb(rstb),
1166
  .raddr(ARADDR_IN[SIMUL_AXI_READ_WIDTH+1:2]), 
1167 1168
  .rlen(ARLEN_IN),
  .rcmd(AR_SET_CMD),
1169
  .addr_out(SIMUL_AXI_ADDR_W[SIMUL_AXI_READ_WIDTH-1:0]),
1170 1171
  .burst(),     // burst in progress - just debug
  .err_out());  // data last does not match predicted or FIFO over/under run - just debug
1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207


simul_axi_hp_rd #(
        .HP_PORT(0)
    ) simul_axi_hp_rd_i (
        .rst            (RST),                               // input
        .aclk           (x393_i.ps7_i.SAXIHP0ACLK),          // input
        .aresetn        (),                                  // output
        .araddr         (x393_i.ps7_i.SAXIHP0ARADDR[31:0]),  // input[31:0] 
        .arvalid        (x393_i.ps7_i.SAXIHP0ARVALID),       // input
        .arready        (x393_i.ps7_i.SAXIHP0ARREADY),       // output
        .arid           (x393_i.ps7_i.SAXIHP0ARID),          // input[5:0] 
        .arlock         (x393_i.ps7_i.SAXIHP0ARLOCK),        // input[1:0] 
        .arcache        (x393_i.ps7_i.SAXIHP0ARCACHE),       // input[3:0] 
        .arprot         (x393_i.ps7_i.SAXIHP0ARPROT),        // input[2:0] 
        .arlen          (x393_i.ps7_i.SAXIHP0ARLEN),         // input[3:0] 
        .arsize         (x393_i.ps7_i.SAXIHP0ARSIZE),        // input[2:0] 
        .arburst        (x393_i.ps7_i.SAXIHP0ARBURST),       // input[1:0] 
        .arqos          (x393_i.ps7_i.SAXIHP0ARQOS),         // input[3:0] 
        .rdata          (x393_i.ps7_i.SAXIHP0RDATA),         // output[63:0] 
        .rvalid         (x393_i.ps7_i.SAXIHP0RVALID),        // output
        .rready         (x393_i.ps7_i.SAXIHP0RREADY),        // input
        .rid            (x393_i.ps7_i.SAXIHP0RID),           // output[5:0] 
        .rlast          (x393_i.ps7_i.SAXIHP0RLAST),         // output
        .rresp          (x393_i.ps7_i.SAXIHP0RRESP),         // output[1:0] 
        .rcount         (x393_i.ps7_i.SAXIHP0RCOUNT),        // output[7:0] 
        .racount        (x393_i.ps7_i.SAXIHP0RACOUNT),       // output[2:0] 
        .rdissuecap1en  (x393_i.ps7_i.SAXIHP0RDISSUECAP1EN), // input
        .sim_rd_address (afi_sim_rd_address), // output[31:0] 
        .sim_rid        (afi_sim_rid), // output[5:0] 
        .sim_rd_valid   (afi_sim_rd_valid), // input
        .sim_rd_ready   (afi_sim_rd_ready), // output
        .sim_rd_data    (afi_sim_rd_data), // input[63:0] 
        .sim_rd_cap     (afi_sim_rd_cap), // output[2:0] 
        .sim_rd_qos     (afi_sim_rd_qos), // output[3:0] 
        .sim_rd_resp    (afi_sim_rd_resp), // input[1:0] 
Andrey Filippov's avatar
Andrey Filippov committed
1208 1209 1210 1211 1212
        .reg_addr       (PS_REG_ADDR), // input[31:0] 
        .reg_wr         (PS_REG_WR), // input
        .reg_rd         (PS_REG_RD), // input
        .reg_din        (PS_REG_DIN), // input[31:0] 
        .reg_dout       (PS_REG_DOUT) // output[31:0] 
1213 1214 1215 1216 1217
    );

simul_axi_hp_wr #(
        .HP_PORT(0)
    ) simul_axi_hp_wr_i (
Andrey Filippov's avatar
Andrey Filippov committed
1218
        .rst            (RST), // input
1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253
        .aclk           (x393_i.ps7_i.SAXIHP0ACLK),          // input
        .aresetn        (),                                  // output
        .awaddr         (x393_i.ps7_i.SAXIHP0AWADDR),        // input[31:0] 
        .awvalid        (x393_i.ps7_i.SAXIHP0AWVALID),       // input
        .awready        (x393_i.ps7_i.SAXIHP0AWREADY),       // output
        .awid           (x393_i.ps7_i.SAXIHP0AWID),          // input[5:0] 
        .awlock         (x393_i.ps7_i.SAXIHP0AWLOCK),        // input[1:0] 
        .awcache        (x393_i.ps7_i.SAXIHP0AWCACHE),       // input[3:0] 
        .awprot         (x393_i.ps7_i.SAXIHP0AWPROT),        // input[2:0] 
        .awlen          (x393_i.ps7_i.SAXIHP0AWLEN),         // input[3:0] 
        .awsize         (x393_i.ps7_i.SAXIHP0AWSIZE),        // input[2:0] 
        .awburst        (x393_i.ps7_i.SAXIHP0AWBURST),       // input[1:0] 
        .awqos          (x393_i.ps7_i.SAXIHP0AWQOS),         // input[3:0] 
        .wdata          (x393_i.ps7_i.SAXIHP0WDATA),         // input[63:0] 
        .wvalid         (x393_i.ps7_i.SAXIHP0WVALID),        // input
        .wready         (x393_i.ps7_i.SAXIHP0WREADY),        // output
        .wid            (x393_i.ps7_i.SAXIHP0WID),           // input[5:0] 
        .wlast          (x393_i.ps7_i.SAXIHP0WLAST),         // input
        .wstrb          (x393_i.ps7_i.SAXIHP0WSTRB),         // input[7:0] 
        .bvalid         (x393_i.ps7_i.SAXIHP0BVALID),        // output
        .bready         (x393_i.ps7_i.SAXIHP0BREADY),        // input
        .bid            (x393_i.ps7_i.SAXIHP0BID),           // output[5:0] 
        .bresp          (x393_i.ps7_i.SAXIHP0BRESP),         // output[1:0] 
        .wcount         (x393_i.ps7_i.SAXIHP0WCOUNT),        // output[7:0] 
        .wacount        (x393_i.ps7_i.SAXIHP0WACOUNT),       // output[5:0] 
        .wrissuecap1en  (x393_i.ps7_i.SAXIHP0WRISSUECAP1EN), // input
        .sim_wr_address (afi_sim_wr_address), // output[31:0] 
        .sim_wid        (afi_sim_wid), // output[5:0] 
        .sim_wr_valid   (afi_sim_wr_valid), // output
        .sim_wr_ready   (afi_sim_wr_ready), // input
        .sim_wr_data    (afi_sim_wr_data), // output[63:0] 
        .sim_wr_stb     (afi_sim_wr_stb), // output[7:0] 
        .sim_bresp_latency(afi_sim_bresp_latency), // input[3:0] 
        .sim_wr_cap     (afi_sim_wr_cap), // output[2:0] 
        .sim_wr_qos     (afi_sim_wr_qos), // output[3:0] 
Andrey Filippov's avatar
Andrey Filippov committed
1254 1255 1256 1257 1258
        .reg_addr       (PS_REG_ADDR), // input[31:0] 
        .reg_wr         (PS_REG_WR), // input
        .reg_rd         (PS_REG_RD), // input
        .reg_din        (PS_REG_DIN), // input[31:0] 
        .reg_dout       (PS_REG_DOUT) // output[31:0] 
1259 1260 1261 1262
    );



1263 1264 1265 1266 1267
    
    //  wire [ 3:0] SIMUL_ADD_ADDR; 
    always @ (posedge CLK) begin
        if      (RST) SIMUL_AXI_FULL <=0;
        else if (rstb) SIMUL_AXI_FULL <=1;
1268 1269 1270 1271 1272 1273
        
        if (RST) begin
              NUM_WORDS_READ <= 0;
        end else if (rstb) begin
            NUM_WORDS_READ <= NUM_WORDS_READ + 1; 
        end    
1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287
        if (rstb) begin
            SIMUL_AXI_ADDR <= SIMUL_AXI_ADDR_W;
            SIMUL_AXI_READ <= rdata;
`ifdef DEBUG_RD_DATA
        $display (" Read data (addr:data): 0x%x:0x%x @%t",SIMUL_AXI_ADDR_W,rdata,$time);
`endif  
            
        end 
        
    end
    
    
// SuppressWarnings VEditor all - these variables are just for viewing, not used anywhere else
  reg DEBUG1, DEBUG2, DEBUG3;
Andrey Filippov's avatar
Andrey Filippov committed
1288 1289
  reg [11:0] GLOBAL_WRITE_ID=0;
  reg [11:0] GLOBAL_READ_ID=0;
1290 1291 1292 1293 1294 1295 1296 1297 1298
  reg [7:0] target_phase=0; // to compare/wait for phase shifter ready
  
   task set_up;
        begin
// set dq /dqs tristate on/off patterns
            axi_set_tristate_patterns;
// set patterns for DM (always 0) and DQS - always the same (may try different for write lev.)
            axi_set_dqs_dqm_patterns;
// prepare all sequences
1299
            set_all_sequences (1,0); // rsel = 1, wsel=0
1300
// prepare write buffer    
1301
            write_block_buf_chn(0,0,256); // fill block memory (channel, page, number)
1302 1303
// set all delays
//#axi_set_delays - from tables, per-pin
1304 1305
`ifdef SET_PER_PIN_DELAYS
            $display("SET_PER_PIN_DELAYS @ %t",$time);
1306 1307
            axi_set_delays; // set all individual delays, aslo runs axi_set_phase()
`else
1308
            $display("SET COMMON DELAYS @ %t",$time);
1309
            axi_set_same_delays(DLY_DQ_IDELAY,DLY_DQ_ODELAY,DLY_DQS_IDELAY,DLY_DQS_ODELAY,DLY_DM_ODELAY,DLY_CMDA_ODELAY);
1310 1311
// set clock phase relative to DDR clk
            axi_set_phase(DLY_PHASE);
1312 1313
`endif            
            
1314 1315 1316
        end
    endtask

1317 1318 1319 1320 1321
// tasks - when tested - move to includes

task test_write_levelling; // SuppressThisWarning VEditor - may be unused
  begin
// Set special values for DQS idelay for write leveling
1322
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // not no interrupt running cycle - delays are changed immediately
1323 1324 1325 1326
        axi_set_dqs_idelay_wlv;
// Set write buffer (from DDR3) WE signal delay for write leveling mode
        axi_set_wbuf_delay(WBUF_DLY_WLV);
        axi_set_dqs_odelay('h80); // 'h80 - inverted, 'h60 - not - 'h80 will cause warnings during simulation
1327
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1328 1329 1330 1331 1332 1333
                        WRITELEV_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        0,                 // input [1:0] page;     // buffer page number
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
                        
1334
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1335 1336 1337
        read_block_buf_chn (0, 0, 32, 1 ); // chn=0, page=0, number of 32-bit words=32, wait_done
//        @ (negedge rstb);
        axi_set_dqs_odelay(DLY_DQS_ODELAY);
1338
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1339 1340 1341 1342 1343
                        WRITELEV_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        1,                 // input [1:0] page;     // buffer page number
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1344
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1345 1346 1347 1348 1349
        read_block_buf_chn (0, 1, 32, 1 ); // chn=0, page=1, number of 32-bit words=32, wait_done
//    task wait_read_queue_empty; - alternative way to check fo empty read queue
        
//        @ (negedge rstb);
        axi_set_dqs_idelay_nominal;
1350 1351
        axi_set_dqs_odelay_nominal;
//        axi_set_dqs_odelay('h78);
1352 1353 1354 1355 1356 1357
        axi_set_wbuf_delay(WBUF_DLY_DFLT); //DFLT_WBUF_DELAY
   end
endtask

task test_read_pattern; // SuppressThisWarning VEditor - may be unused
    begin  
1358
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1359 1360 1361 1362 1363
                        READ_PATTERN_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        2,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1364
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1365 1366 1367 1368 1369 1370 1371
        read_block_buf_chn (0, 2, 32, 1 ); // chn=0, page=2, number of 32-bit words=32, wait_done
    end
endtask

task test_write_block; // SuppressThisWarning VEditor - may be unused
    begin
//    write_block_buf_chn; // fill block memory - already set in set_up task
1372
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1373 1374 1375 1376 1377 1378
                        WRITE_BLOCK_OFFSET,    // input [9:0] seq_addr; // sequence start address
                        0,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        1,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
// tempoary - for debugging:
1379
//        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1380 1381 1382 1383 1384
    end
endtask

task test_read_block; // SuppressThisWarning VEditor - may be unused
    begin
1385
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1386 1387 1388 1389 1390
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        3,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1391
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1392 1393 1394 1395 1396
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        2,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1397
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1398 1399 1400 1401 1402
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        1,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1403
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1404 1405 1406 1407
        read_block_buf_chn (0, 3, 256, 1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
    end
endtask

Andrey Filippov's avatar
Andrey Filippov committed
1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467

// above - move to include

task test_afi_rw; // SuppressThisWarning VEditor - may be unused
    input        write_ddr3;
    input  [1:0] extra_pages;
    input [21:0] frame_start_addr;
    input [15:0] window_full_width; // 13 bit - in 8*16=128 bit bursts
    input [15:0] window_width;  // 13 bit - in 8*16=128 bit bursts
    input [15:0] window_height; // 16 bit (only 14 are used here)
    input [15:0] window_left;
    input [15:0] window_top;
    input [28:0] start64;  // relative start adderss of the transfer (set to 0 when writing lo_addr64)
    input [28:0] lo_addr64; // low address of the system memory range, in 64-bit words 
    input [28:0] size64;    // size of the system memory range in 64-bit words
    input        continue;    // 0 start from start64, 1 - continue from where it was
    
// -----------------------------------------
    integer mode;
    begin
        $display("====== test_afi_rw: write=%d, extra_pages=%d,  frame_start= %x, window_full_width=%d, window_width=%d, window_height=%d, window_left=%d, window_top=%d,@%t",
                                      write_ddr3,  extra_pages, frame_start_addr, window_full_width,   window_width, window_height, window_left, window_top, $time);
        $display("len64=%x,  width64=%x, start64=%x, lo_addr64=%x, size64=%x,@%t",
                  ((window_width[12:0]==0)? 15'h4000 : {1'b0,window_width[12:0],1'b0})*window_height[13:0],
                  (window_width[12:0]==0)? 29'h4000 : {15'b0,window_width[12:0],1'b0},
                  start64, lo_addr64, size64, $time);
        mode=   func_encode_mode_scanline(
                    extra_pages,
                    write_ddr3, // write_mem,
                    1, // enable
                    0);  // chn_reset
        write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_STARTADDR,        {10'b0,frame_start_addr}); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, {16'h0, window_full_width});
        write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
        write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_WINDOW_STARTXY,   0);
        write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_MODE,             mode); 
        configure_channel_priority(1,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(1,1);
//        write_contol_register(test_mode_address,            TEST01_START_FRAME);
        afi_setup(0);
        membridge_setup(
            ((window_width[12:0]==0)? 15'h4000 : {1'b0,window_width[12:0],1'b0})*window_height[13:0], //len64,
            (window_width[12:0]==0)? 29'h4000 : {15'b0,window_width[12:0],1'b0}, // width64,
            start64,
            lo_addr64,
            size64);
        membridge_start (continue);         
// just wait done
        wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
            MEMBRIDGE_STATUS_REG, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
            MCNTRL_SCANLINE_CHN1_ADDR + MEMBRIDGE_STATUS_CNTRL, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
            DEFAULT_STATUS_MODE,
            2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
            2 << STATUS_2LSB_SHFT,  // mask for the 4-bit page number
            0, // equal to
            0); // no need to synchronize sequence number
    end
endtask

1468 1469 1470 1471
task test_scanline_write; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input            [1:0] extra_pages;
    input                  wait_done;
Andrey Filippov's avatar
Andrey Filippov committed
1472 1473
    input [15:0]           window_width;  // 13 bit - in 8*16=128 bit bursts
    input [15:0]           window_height; // 16 bit
1474 1475 1476
    input [15:0]           window_left;
    input [15:0]           window_top;
    
1477 1478 1479 1480 1481 1482 1483 1484
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    
    integer       ii;
1485 1486 1487
    integer xfer_size;
    integer pages_per_row;
    integer startx,starty; // temporary - because of the vdt bug with integer ports
1488
    begin
1489
        pages_per_row= (window_width>>NUM_XFER_BITS)+((window_width[NUM_XFER_BITS-1:0]==0)?0:1);
1490 1491 1492
        $display("====== test_scanline_write: channel=%d, extra_pages=%d,  wait_done=%d @%t",
                                              channel,    extra_pages,     wait_done,   $time);
        case (channel)
Andrey Filippov's avatar
Andrey Filippov committed
1493 1494 1495 1496 1497 1498
//            1:  begin
//                    start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
//                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
//                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
//                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
//                end
1499 1500 1501 1502 1503 1504 1505
            3:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
                end
            default: begin
Andrey Filippov's avatar
Andrey Filippov committed
1506 1507
                $display("**** ERROR: Invalid channel, only 3 is valid");
                start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
            end
        endcase
        mode=   func_encode_mode_scanline(
                    extra_pages,
                    1, // write_mem,
                    1, // enable
                    0);  // chn_reset
                
Andrey Filippov's avatar
Andrey Filippov committed
1519
        write_contol_register(start_addr + MCNTRL_SCANLINE_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
1520
        write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1521 1522
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
1523 1524 1525 1526 1527 1528 1529 1530
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY,   SCANLINE_STARTX+(SCANLINE_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_MODE,             mode); 
        configure_channel_priority(channel,0);    // lowest priority channel 3
//        enable_memcntrl_channels(16'h000b); // channels 0,1,3 are enabled
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
        for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
// VDT bugs: 1:does not propagate undefined width through ?:, 2: - does not allow to connect it to task integer input, 3: shows integer input width as 1  
1531
            xfer_size= ((pages_per_row>1)?
1532 1533
                (
                    (
1534
                        ((ii % pages_per_row) < (pages_per_row-1))?
1535
                        (1<<NUM_XFER_BITS):
1536
                        (window_width % (1<<NUM_XFER_BITS))
1537 1538
                    )
                ):
1539
                ({16'b0,window_width}));
1540
           $display("########### test_scanline_write block %d: channel=%d, @%t", ii, channel, $time);
1541 1542
           startx=window_left + ((ii % pages_per_row)<<NUM_XFER_BITS);
           starty=window_top + (ii / pages_per_row);
1543 1544 1545
           write_block_scanline_chn(
            channel,
            (ii & 3),
1546 1547 1548
            xfer_size,
            startx, //window_left + ((ii % pages_per_row)<<NUM_XFER_BITS),  // SCANLINE_CUR_X,
            starty); // window_top + (ii / pages_per_row)); // SCANLINE_CUR_Y);\
1549 1550
            
        end
1551
        for (ii=0;ii< (window_height * pages_per_row) ;ii = ii+1) begin // here assuming 1 page per line
1552 1553 1554 1555 1556 1557 1558
            if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
                wait_status_condition (
                    status_address, //MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                    status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                    DEFAULT_STATUS_MODE,
                    (ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
                    'hf << 16,  // mask for the 4-bit page number
1559 1560
                    1, // not equal to
                    (ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
1561
                xfer_size= ((pages_per_row>1)?
1562 1563
                    (
                        (
1564
                            ((ii % pages_per_row) < (pages_per_row-1))?
1565 1566
                        
                         (1<<NUM_XFER_BITS):
1567
                            (window_width % (1<<NUM_XFER_BITS))
1568 1569
                        )
                    ):
1570
                    ({16'b0,window_width}));
1571
                $display("########### test_scanline_write block %d: channel=%d, @%t", ii, channel, $time);
1572 1573 1574
                startx=window_left + ((ii % pages_per_row)<<NUM_XFER_BITS);
                starty=window_top + (ii / pages_per_row);
                
1575 1576 1577
                write_block_scanline_chn(
                    channel,
                    (ii & 3),
1578 1579 1580
                xfer_size,
                startx,  // window_left + ((ii % pages_per_row)<<NUM_XFER_BITS),  // SCANLINE_CUR_X,
                starty); // window_top + (ii / pages_per_row)); // SCANLINE_CUR_Y);
1581 1582 1583 1584 1585 1586 1587 1588 1589 1590
            end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
        if (wait_done) begin
            wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
                2 << STATUS_2LSB_SHFT,  // mask for the 4-bit page number
1591 1592
                0, // equal to
                0); // no need to synchronize sequence number
1593 1594 1595 1596 1597 1598 1599 1600 1601
//     enable_memcntrl_en_dis(channel,0); // disable channel
        end
    end
endtask

task test_scanline_read; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input            [1:0] extra_pages;
    input                  show_data;
1602 1603 1604 1605
    input [15:0]           window_width;
    input [15:0]           window_height;
    input [15:0]           window_left;
    input [15:0]           window_top;
1606 1607 1608 1609 1610 1611 1612
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    integer       ii;
1613 1614 1615
    integer xfer_size;
    integer pages_per_row;
    
1616
    begin
1617
        pages_per_row= (window_width>>NUM_XFER_BITS)+((window_width[NUM_XFER_BITS-1:0]==0)?0:1);
1618 1619 1620
        $display("====== test_scanline_read: channel=%d, extra_pages=%d,  show_data=%d @%t",
                                             channel,    extra_pages,     show_data,    $time);
        case (channel)
Andrey Filippov's avatar
Andrey Filippov committed
1621 1622 1623 1624 1625 1626
//            1:  begin
//                    start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
//                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
//                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
//                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
//                end
1627 1628 1629 1630 1631 1632 1633
            3:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
                end
            default: begin
Andrey Filippov's avatar
Andrey Filippov committed
1634 1635
                $display("**** ERROR: Invalid channel, only 3 is valid");
                start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
            end
        endcase
        mode=   func_encode_mode_scanline(
                    extra_pages,
                    0, // write_mem,
                    1, // enable
                    0);  // chn_reset

   // program to the
        write_contol_register(start_addr + MCNTRL_SCANLINE_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1650 1651
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
1652 1653 1654 1655 1656
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY,   SCANLINE_STARTX+(SCANLINE_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
1657 1658
        for (ii=0;ii<(window_height * pages_per_row);ii = ii+1) begin
            xfer_size= ((pages_per_row>1)?
1659 1660
                (
                    (
1661
                        ((ii % pages_per_row) < (pages_per_row-1))?
1662
                        (1<<NUM_XFER_BITS):
1663
                        (window_width % (1<<NUM_XFER_BITS))
1664 1665
                    )
                ):
1666
                ({16'b0,window_width}));
1667 1668 1669 1670 1671 1672
            wait_status_condition (
                status_address, //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                (ii) << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
                'hf << 16,  // mask for the 4-bit page number
1673 1674
                 1, // not equal to
                 (ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
1675
// read block (if needed), for now just sikip  
1676 1677 1678 1679 1680
                if (show_data) begin
                    $display("########### test_scanline_read block %d: channel=%d, @%t", ii, channel, $time);
                    read_block_buf_chn (
                        channel,
                        (ii & 3),
1681
                        xfer_size <<2,
1682
                        1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694
                end
        write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
    end
  end  
endtask

task test_tiled_write; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input                  byte32;
    input                  keep_open;
    input            [1:0] extra_pages;
    input                  wait_done;
1695 1696 1697 1698 1699 1700 1701 1702 1703
    input [15:0]           window_width;
    input [15:0]           window_height;
    input [15:0]           window_left;
    input [15:0]           window_top;
    input [ 7:0]           tile_width;
    input [ 7:0]           tile_height;
    input [ 7:0]           tile_vstep;
    
    
1704 1705 1706 1707 1708 1709 1710
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    integer       ii;
1711 1712 1713 1714
    integer       tiles_per_row;
    integer       tile_rows_per_window;
    integer       tile_size;
    integer startx,starty; // temporary - because of the vdt bug with integer ports
1715
    begin
1716 1717 1718
        tiles_per_row= (window_width/tile_width)+  ((window_width % tile_width==0)?0:1);
        tile_rows_per_window= ((window_height-1)/tile_vstep) + 1;
        tile_size= tile_width*tile_height;
1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750
        $display("====== test_tiled_write: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d,  wait_done=%d @%t",
                                           channel,    byte32,    keep_open,    extra_pages,     wait_done,   $time);
        case (channel)
            2:  begin
                    start_addr=             MCNTRL_TILED_CHN2_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
                end
            4:  begin
                    start_addr=             MCNTRL_TILED_CHN4_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 2 and 4 are valid");
                start_addr=             MCNTRL_TILED_CHN2_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
            end
        endcase
        mode=   func_encode_mode_tiled(
                    byte32,
                    keep_open,
                    extra_pages,
                    1, // write_mem,
                    1, // enable
                    0);  // chn_reset
        write_contol_register(start_addr + MCNTRL_TILED_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1751 1752 1753
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
        
1754
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY,   TILED_STARTX+(TILED_STARTY<<16));
1755
        write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS,         {8'b0,tile_vstep,tile_height,tile_width});//tile_width+(tile_height<<8)+(tile_vstep<<16));
1756 1757 1758 1759 1760 1761
        write_contol_register(start_addr + MCNTRL_TILED_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
    
        for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
1762
            $display("########### test_tiled_write block %d: channel=%d, @%t", ii, channel, $time);
1763 1764
            startx = window_left + ((ii % tiles_per_row) * tile_width);
            starty = window_top + (ii / tile_rows_per_window); // SCANLINE_CUR_Y);\
1765 1766 1767
            write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
                channel, // channel
                (ii & 3),
1768 1769 1770
                tile_size,
                startx, //window_left + ((ii % tiles_per_row) * tile_width),
                starty); //window_top + (ii / tile_rows_per_window)); // SCANLINE_CUR_Y);\
1771 1772
        end
    
1773
        for (ii=0;ii<(tiles_per_row * tile_rows_per_window);ii = ii+1) begin
1774 1775 1776 1777 1778 1779 1780
            if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
                wait_status_condition (
                    status_address, // MCNTRL_TEST01_STATUS_REG_CHN5_ADDR,
                    status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN5_STATUS_CNTRL,
                    DEFAULT_STATUS_MODE,
                    (ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
                    'hf << 16,  // mask for the 4-bit page number
1781 1782
                    1, // not equal to
                    (ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
1783
                $display("########### test_tiled_write block %d: channel=%d, @%t", ii, channel, $time);
1784 1785
                startx = window_left + ((ii % tiles_per_row) * tile_width);
                starty = window_top + (ii / tile_rows_per_window);
1786 1787 1788
                write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
                    channel, // channel
                    (ii & 3),
1789 1790 1791
                    tile_size,
                    startx, // window_left + ((ii % tiles_per_row) * tile_width),
                    starty); // window_top + (ii / tile_rows_per_window)); // SCANLINE_CUR_Y);\
1792 1793 1794 1795 1796 1797 1798 1799 1800 1801
            end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
        if (wait_done) begin
            wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
                2 << STATUS_2LSB_SHFT,  // mask for the 4-bit page number
1802 1803
                0, // equal to
                0); // no need to synchronize sequence number
1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816
//     enable_memcntrl_en_dis(channel,0); // disable channel
        end
    end  
endtask



task test_tiled_read; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input                  byte32;
    input                  keep_open;
    input            [1:0] extra_pages;
    input                  show_data;
1817 1818 1819 1820 1821 1822 1823
    input [15:0]           window_width;
    input [15:0]           window_height;
    input [15:0]           window_left;
    input [15:0]           window_top;
    input [ 7:0]           tile_width;
    input [ 7:0]           tile_height;
    input [ 7:0]           tile_vstep;
1824 1825 1826 1827 1828 1829 1830 1831
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    
    integer       ii;
1832 1833 1834 1835
    integer       tiles_per_row;
    integer       tile_rows_per_window;
    integer       tile_size;
    
1836
    begin
1837 1838 1839
        tiles_per_row= (window_width/tile_width)+  ((window_width % tile_width==0)?0:1);
        tile_rows_per_window= ((window_height-1)/tile_vstep) + 1;
        tile_size= tile_width*tile_height;
1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871
        $display("====== test_tiled_read: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d,  show_data=%d @%t",
                                          channel,      byte32,  keep_open,    extra_pages,     show_data,   $time);
        case (channel)
            2:  begin
                    start_addr=             MCNTRL_TILED_CHN2_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
                end
            4:  begin
                    start_addr=             MCNTRL_TILED_CHN4_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 2 and 4 are valid");
                start_addr=             MCNTRL_TILED_CHN2_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
            end
        endcase
        mode=   func_encode_mode_tiled(
                    byte32,
                    keep_open,
                    extra_pages,
                    0, // write_mem,
                    1, // enable
                    0);  // chn_reset
        write_contol_register(start_addr + MCNTRL_TILED_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1872 1873 1874
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
        
1875
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY,   TILED_STARTX+(TILED_STARTY<<16));
1876
        write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS,         {8'b0,tile_vstep,tile_height,tile_width});//(tile_height<<8)+(tile_vstep<<16));
1877 1878 1879 1880
        write_contol_register(start_addr + MCNTRL_TILED_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
1881
        for (ii=0;ii<(tiles_per_row * tile_rows_per_window);ii = ii+1) begin
1882 1883 1884 1885 1886 1887
            wait_status_condition (
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN4_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                ii << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
                'hf << 16,  // mask for the 4-bit page number
1888 1889
                1, // not equal to
                (ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
1890
                if (show_data) begin 
1891 1892 1893 1894
                    $display("########### test_tiled_read block %d: channel=%d, @%t", ii, channel, $time);
                    read_block_buf_chn (
                        channel,
                        (ii & 3),
1895
                        tile_size <<2,
1896
                        1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909
                end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
//     enable_memcntrl_en_dis(channel,0); // disable channel
    end  
endtask







1910
task set_all_sequences;
1911 1912
    input rsel;
    input wsel;
1913 1914 1915 1916 1917
        begin
            $display("SET MRS @ %t",$time);    
            set_mrs(1);
            $display("SET REFRESH @ %t",$time);    
            set_refresh(
1918 1919
                T_RFC, // input [ 9:0] t_rfc; // =50 for tCK=2.5ns
                T_REFI); //input [ 7:0] t_refi; // 48/97 for normal, 8 - for simulation
1920 1921 1922 1923 1924 1925 1926 1927
            $display("SET WRITE LEVELING @ %t",$time);    
            set_write_lev(16); // write leveling, 16 times   (full buffer - 128) 
            $display("SET READ PATTERN @ %t",$time);    
            set_read_pattern(8); // 8x2*64 bits, 32x32 bits to read
            $display("SET WRITE BLOCK @ %t",$time);    
            set_write_block(
                3'h5,     // bank
                15'h1234, // row address
1928 1929
                10'h100,   // column address
                wsel
1930 1931 1932 1933 1934 1935
            );
           
            $display("SET READ BLOCK @ %t",$time);    
            set_read_block(
                3'h5,     // bank
                15'h1234, // row address
1936 1937
                10'h100,   // column address
                rsel      // sel
1938 1939 1940
            );
        end
endtask
Andrey Filippov's avatar
Andrey Filippov committed
1941

1942
task write_block_scanline_chn;  // S uppressThisWarning VEditor : may be unused
1943 1944
//    input integer chn; // buffer channel
    input   [3:0] chn; // buffer channel
1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955
    input   [1:0] page;
//    input integer num_words; // number of words to write (will be rounded up to multiple of 16)
    input [NUM_XFER_BITS:0] num_bursts; // number of 8-bursts to write (will be rounded up to multiple of 16)
    input integer startX;
    input integer startY;
    reg    [29:0] start_addr;
    integer num_words;
    begin
//        $display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_words, $time);
        $display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_bursts, $time);
        case (chn)
1956
            0:  start_addr=MCONTR_BUF0_WR_ADDR + (page << 8);
Andrey Filippov's avatar
Andrey Filippov committed
1957
//            1:  start_addr=MCONTR_BUF1_WR_ADDR + (page << 8);
1958
            2:  start_addr=MCONTR_BUF2_WR_ADDR + (page << 8);
Andrey Filippov's avatar