ram18p_var_w_var_r.v 29.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
/*******************************************************************************
 * Copyright (c) 2015 Elphel, Inc.
 * Dual port memory wrapper, with variable width write and variable width read
 * using "SDP" or "TDP" mode of RAMB18E1 (half of RAMB18E1) 
 * Uses parity bits to extend total data width (minimal width should be >=8).
 * ram18p_var_w_var_r.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * ram18p_var_w_var_r.v is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *******************************************************************************/
19
`include "system_defines.vh" 
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
/*
   Address/data widths
   Connect unused data to 1b0, unused addresses - to 1'b1
   
   RAMB18E1 in True Dual Port (TDP) Mode - each port individually
   +-----------+---------+---------+---------+
   |Data Width | Address |   Data  | Parity  |
   +-----------+---------+---------+---------+
   |     1     | A[13:0] | D[0]    |  ---    |
   |     2     | A[13:1] | D[1:0]  |  ---    |
   |     4     | A[13:2] | D[3:0[  |  ---    |
   |     9     | A[13:3] | D[7:0]  | DP[0]   |
   |    18     | A[13:4] | D[15:0] | DP[1:0] |
   +-----------+---------+---------+---------+

   RAMB18E1 in Simple Dual Port (SDP) Mode
   one of the ports (r or w) - 32/36 bits, other - variable 
   +------------+---------+---------+---------+
   |Data Widths | Address |   Data  | Parity  |
   +------------+---------+---------+---------+
   |   32/  1   | A[13:0] | D[0]    |  ---    |
   |   32/  2   | A[13:1] | D[1:0]  |  ---    |
   |   32/  4   | A[13:2] | D[3:0[  |  ---    |
   |   36/  9   | A[13:3] | D[7:0]  | DP[0]   |
   |   36/ 18   | A[13:4] | D[15:0] | DP[1:0] |
   |   36/ 36   | A[13:5] | D[31:0] | DP[3:0] |
   +------------+---------+---------+---------+
   
   RAMB36E1 in True Dual Port (TDP) Mode - each port individually
   +-----------+---------+---------+---------+
   |Data Width | Address |   Data  | Parity  |
   +-----------+---------+---------+---------+
   |     1     | A[14:0] | D[0]    |  ---    |
   |     2     | A[14:1] | D[1:0]  |  ---    |
   |     4     | A[14:2] | D[3:0[  |  ---    |
   |     9     | A[14:3] | D[7:0]  | DP[0]   |
   |    18     | A[14:4] | D[15:0] | DP[1:0] |
   |    36     | A[14:5] | D[31:0] | DP[3:0] |
   |1(Cascade) | A[15:0] | D[0]    |  ---    |
   +-----------+---------+---------+---------+

   RAMB36E1 in Simple Dual Port (SDP) Mode
   one of the ports (r or w) - 64/72 bits, other - variable 
   +------------+---------+---------+---------+
   |Data Widths | Address |   Data  | Parity  |
   +------------+---------+---------+---------+
   |   64/  1   | A[14:0] | D[0]    |  ---    |
   |   64/  2   | A[14:1] | D[1:0]  |  ---    |
   |   64/  4   | A[14:2] | D[3:0[  |  ---    |
   |   64/  9   | A[14:3] | D[7:0]  | DP[0]   |
   |   64/ 18   | A[14:4] | D[15:0] | DP[1:0] |
   |   64/ 36   | A[14:5] | D[31:0] | DP[3:0] |
   |   64/ 72   | A[14:6] | D[63:0] | DP[7:0] |
   +------------+---------+---------+---------+
*/
module  ram18p_var_w_var_r
#(
  parameter integer REGISTERS    = 0, // 1 - registered output
  parameter integer LOG2WIDTH_WR = 5, // WIDTH= 9  << (LOG2WIDTH - 3)
  parameter integer LOG2WIDTH_RD = 5, // WIDTH= 9  << (LOG2WIDTH - 3)
  parameter         DUMMY = 0
81 82 83 84
`ifdef PRELOAD_BRAMS
    ,
    `include "includes/ram18_declare_init.vh"
`endif
85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107
 )
   (
      input                            rclk,     // clock for read port
//      input  [ 9:0] raddr,    // read address
      input        [13-LOG2WIDTH_RD:0] raddr,    // read address
      input                            ren,      // read port enable
      input                            regen,    // output register enable
      output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out, // data out
      
      input                            wclk,     // clock for read port
      input        [13-LOG2WIDTH_WR:0] waddr,    // write address
      input                            we,       // write port enable
      input                     [ 3:0] web,      // write byte enable
      input  [(9 << (LOG2WIDTH_WR-3))-1:0] data_in   // data out
    );
    generate
        if (DUMMY)
            ram18p_dummy #(
                .LOG2WIDTH_RD(LOG2WIDTH_RD)
            ) ram18p_dummy_i (
                .data_out(data_out) 
            );
        else if ((LOG2WIDTH_WR == 5) && (LOG2WIDTH_RD == 5))
108
            ram18p_32w_32r #(
109
                .REGISTERS    (REGISTERS)
110 111 112
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
            ) ram_i (
                .rclk         (rclk),     // input
                .raddr        (raddr),    // input[8:0] 
                .ren          (ren),      // input
                .regen        (regen),    // input
                .data_out     (data_out), // output[35:0] 
                .wclk         (wclk),     // input
                .waddr        (waddr),    // input[8:0] 
                .we           (we),       // input
                .web          (web),      // input[3:0] 
                .data_in      (data_in)   // input[35:0] 
            );
        else if ((LOG2WIDTH_WR == 5) && (LOG2WIDTH_RD < 5))
            ram18p_32w_lt32r #(
                .REGISTERS    (REGISTERS),
                .LOG2WIDTH_RD (LOG2WIDTH_RD)
129 130 131
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
132 133 134 135 136 137 138 139 140 141 142 143 144
            ) ram_i (
                .rclk         (rclk),     // input
                .raddr        (raddr),    // input[(>8):0] 
                .ren          (ren),      // input
                .regen        (regen),    // input
                .data_out     (data_out), // output[(<35):0] 
                .wclk         (wclk),     // input
                .waddr        (waddr),    // input[8:0] 
                .we           (we),       // input
                .web          (web),      // input[3:0] 
                .data_in      (data_in)   // input[35:0] 
            );
        else if ((LOG2WIDTH_WR < 5) && (LOG2WIDTH_RD == 5))
145
            ram18p_lt32w_32r #(
146 147
                .REGISTERS    (REGISTERS),
                .LOG2WIDTH_WR (LOG2WIDTH_WR)
148 149 150
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
151 152 153 154 155 156 157 158 159 160 161 162 163
            ) ram_i (
                .rclk         (rclk),     // input
                .raddr        (raddr),    // input[8:0] 
                .ren          (ren),      // input
                .regen        (regen),    // input
                .data_out     (data_out), // output[35:0] 
                .wclk         (wclk),     // input
                .waddr        (waddr),    // input[(>8):0] 
                .we           (we),       // input
                .web          (web),      // input[3:0] 
                .data_in      (data_in)   // input[(<35):0] 
            );
        else if ((LOG2WIDTH_WR < 5) && (LOG2WIDTH_RD < 5))
164
            ram18p_lt32w_lt32r #(
165 166 167
                .REGISTERS    (REGISTERS),
                .LOG2WIDTH_WR (LOG2WIDTH_WR),
                .LOG2WIDTH_RD (LOG2WIDTH_RD)
168 169 170
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187
            ) ram_i (
                .rclk         (rclk),     // input
                .raddr        (raddr),    // input[(>8):0] 
                .ren          (ren),      // input
                .regen        (regen),    // input
                .data_out     (data_out), // output[(<35):0] 
                .wclk         (wclk),     // input
                .waddr        (waddr),    // input[(>8):0] 
                .we           (we),       // input
                .web          (web),      // input[7:0] 
                .data_in      (data_in)   // input[(<35):0] 
            );
    endgenerate
endmodule

// Both ports with 32 bit widths

188
module  ram18p_32w_32r
189 190
#(
  parameter integer REGISTERS    = 0 // 1 - registered output
191 192 193 194
`ifdef PRELOAD_BRAMS
    ,
    `include "includes/ram18_declare_init.vh"
`endif
195 196 197 198 199 200 201 202 203 204 205 206 207 208
 )
   (
      input                         rclk,     // clock for read port
      input                   [8:0] raddr,    // read address
      input                         ren,      // read port enable
      input                         regen,    // output register enable
      output                 [35:0] data_out, // data out
      
      input                         wclk,     // clock for read port
      input                  [ 8:0] waddr,    // write address
      input                         we,       // write port enable
      input                  [ 3:0] web,      // write byte enable
      input                  [35:0] data_in  // data out
    );
Andrey Filippov's avatar
Andrey Filippov committed
209 210
    localparam  PWIDTH_WR=36;
    localparam  PWIDTH_RD=36;
211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228
    
    RAMB18E1
    #(
    .RSTREG_PRIORITY_A         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .RSTREG_PRIORITY_B         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .DOA_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .DOB_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .READ_WIDTH_A              (PWIDTH_RD),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .READ_WIDTH_B              (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_A             (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_B             (PWIDTH_WR),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .RAM_MODE                  ("SDP"),          // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
    .WRITE_MODE_A              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .WRITE_MODE_B              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
    .SIM_COLLISION_CHECK       ("ALL"),          // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
    .INIT_FILE                 ("NONE"),         // "NONE" or filename with initialization data
    .SIM_DEVICE                ("7SERIES")       // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
229 230 231
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263
    ) RAMB36E1_i
    (
        // Port A (Read port in SDP mode):
        .DOADO           (data_out[15:0]), // Port A data/LSB data[15:0], output
        .DOPADOP         (data_out[17:16]),// Port A parity/LSB parity[2:0], output
        .DIADI           (data_in[15:0]),  // Port A data/LSB data[15:0], input
        .DIPADIP         (data_in[17:16]), // Port A parity/LSB parity[2:0], input
        .ADDRARDADDR     ({raddr[8:0],5'b11111}),  // Port A (read port in SDP) address [13:0], unused should be high, input
        .CLKARDCLK       (rclk),           // Port A (read port in SDP) clock, input
        .ENARDEN         (ren),            // Port A (read port in SDP) Enable, input
        .REGCEAREGCE     (regen),          // Port A (read port in SDP) register enable, input
        .RSTRAMARSTRAM   (1'b0),           // Port A (read port in SDP) set/reset, input
        .RSTREGARSTREG   (1'b0),           // Port A (read port in SDP) register set/reset, input
        .WEA             (2'b0),           // Port A (read port in SDP) Write Enable[2:0], input
        // Port B
        .DOBDO           (data_out[33:18]),// Port B data/MSB data[15:0], output
        .DOPBDOP         (data_out[35:34]),// Port B parity/MSB parity[2:0], output
        .DIBDI           (data_in[33:18]), // Port B data/MSB data[31:0], input
        .DIPBDIP         (data_in[35:34]), // Port B parity/MSB parity[1:0], input
        .ADDRBWRADDR     ({waddr[8:0],5'b11111}), // Port B (write port in SDP) address [13:0], unused should be high, input
        .CLKBWRCLK       (wclk),           // Port B (write port in SDP) clock, input
        .ENBWREN         (we),             // Port B (write port in SDP) Enable, input
        .REGCEB          (1'b0),           // Port B (write port in SDP) register enable, input
        .RSTRAMB         (1'b0),           // Port B (write port in SDP) set/reset, input
        .RSTREGB         (1'b0),           // Port B (write port in SDP) register set/reset, input
        .WEBWE           (web)             // Port B (write port in SDP) Write Enable[7:0], input
    );

endmodule

// Both ports with less than 32 bit widths

264
module  ram18p_lt32w_lt32r
265 266 267 268
#(
  parameter integer REGISTERS    = 0, // 1 - registered output
  parameter integer LOG2WIDTH_WR = 4,  // WIDTH= 1  << LOG2WIDTH
  parameter integer LOG2WIDTH_RD = 4   // WIDTH= 1  << LOG2WIDTH
269 270 271 272
`ifdef PRELOAD_BRAMS
    ,
    `include "includes/ram18_declare_init.vh"
`endif
273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319
 )
   (
      input                                rclk,     // clock for read port
      input            [13-LOG2WIDTH_RD:0] raddr,    // read address
      input                                ren,      // read port enable
      input                                regen,    // output register enable
      output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out, // data out
      
      input                                wclk,     // clock for read port
      input            [13-LOG2WIDTH_WR:0] waddr,    // write address
      input                                we,       // write port enable
      input                         [ 3:0] web,      // write byte enable
      input  [(9 << (LOG2WIDTH_WR-3))-1:0] data_in   // data out
    );
    localparam  PWIDTH_WR = (LOG2WIDTH_WR > 2)? (9 << (LOG2WIDTH_WR - 3)): (1 << LOG2WIDTH_WR);
    localparam  PWIDTH_RD = (LOG2WIDTH_RD > 2)? (9 << (LOG2WIDTH_RD - 3)): (1 << LOG2WIDTH_RD);
    localparam  WIDTH_WR  = 1 << LOG2WIDTH_WR;
    localparam  WIDTH_WRP = 1 << (LOG2WIDTH_WR-3);
    localparam  WIDTH_RD  = 1 << LOG2WIDTH_RD;
    localparam  WIDTH_RDP = 1 << (LOG2WIDTH_RD-3);
    
    wire          [15:0] data_out16;
    wire          [ 1:0] datap_out2;
    assign data_out={datap_out2[WIDTH_RDP-1:0], data_out16[WIDTH_RD-1:0]};

    wire [WIDTH_WR+15:0] data_in_ext = {16'b0,data_in[WIDTH_WR-1:0]};
    wire          [15:0] data_in16=data_in_ext[15:0];
    wire [WIDTH_WRP+1:0] datap_in_ext = {2'b0,data_in[WIDTH_WR+:WIDTH_WRP]};
    wire           [1:0] datap_in2=      datap_in_ext[1:0];

    RAMB18E1
    #(
    .RSTREG_PRIORITY_A         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .RSTREG_PRIORITY_B         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .DOA_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .DOB_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .READ_WIDTH_A              (PWIDTH_RD),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .READ_WIDTH_B              (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_A             (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_B             (PWIDTH_WR),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .RAM_MODE                  ("TDP"),          // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
    .WRITE_MODE_A              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .WRITE_MODE_B              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
    .SIM_COLLISION_CHECK       ("ALL"),          // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
    .INIT_FILE                 ("NONE"),         // "NONE" or filename with initialization data
    .SIM_DEVICE                ("7SERIES")       // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
320 321 322
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353
    ) RAMB36E1_i
    (
        // Port A (Read port in SDP mode):
        .DOADO           (data_out16),     // Port A data/LSB data[15:0], output
        .DOPADOP         (datap_out2),     // Port A parity/LSB parity[1:0], output
        .DIADI           (16'h0),          // Port A data/LSB data[15:0], input
        .DIPADIP         (2'h0),           // Port A parity/LSB parity[1:0], input
        .ADDRARDADDR     ({raddr,{LOG2WIDTH_RD{1'b1}}}),  // Port A (read port in SDP) address [13:0], unused should be high, input
        .CLKARDCLK       (rclk),           // Port A (read port in SDP) clock, input
        .ENARDEN         (ren),            // Port A (read port in SDP) Enable, input
        .REGCEAREGCE     (regen),          // Port A (read port in SDP) register enable, input
        .RSTRAMARSTRAM   (1'b0),           // Port A (read port in SDP) set/reset, input
        .RSTREGARSTREG   (1'b0),           // Port A (read port in SDP) register set/reset, input
        .WEA             (2'b0),           // Port A (read port in SDP) Write Enable[3:0], input
        // Port B
        .DOBDO           (),               // Port B data/MSB data[31:0], output
        .DOPBDOP         (),               // Port B parity/MSB parity[3:0], output
        .DIBDI           (data_in16),      // Port B data/MSB data[31:0], input
        .DIPBDIP         (datap_in2),      // Port B parity/MSB parity[3:0], input
        .ADDRBWRADDR     ({waddr,{LOG2WIDTH_WR{1'b1}}}), // Port B (write port in SDP) address [13:0], unused should be high, input
        .CLKBWRCLK       (wclk),           // Port B (write port in SDP) clock, input
        .ENBWREN         (we),             // Port B (write port in SDP) Enable, input
        .REGCEB          (1'b0),           // Port B (write port in SDP) register enable, input
        .RSTRAMB         (1'b0),           // Port B (write port in SDP) set/reset, input
        .RSTREGB         (1'b0),           // Port B (write port in SDP) register set/reset, input
        .WEBWE           (web[3:0])        // Port B (write port in SDP) Write Enable[3:0], input
    );

endmodule

// Write port less than 32bits, read port 32 bit widths
354
module  ram18p_lt32w_32r
355 356 357
#(
  parameter integer REGISTERS    = 0, // 1 - registered output
  parameter integer LOG2WIDTH_WR = 4  // WIDTH= 1  << LOG2WIDTH
358 359 360 361
`ifdef PRELOAD_BRAMS
    ,
    `include "includes/ram18_declare_init.vh"
`endif
362 363 364 365 366 367 368 369 370 371 372 373 374 375
 )
   (
      input                                rclk,     // clock for read port
      input                          [8:0] raddr,    // read address
      input                                ren,      // read port enable
      input                                regen,    // output register enable
      output                        [35:0] data_out, // data out
      
      input                                wclk,     // clock for read port
      input            [13-LOG2WIDTH_WR:0] waddr,    // write address
      input                                we,       // write port enable
      input                         [ 3:0] web,      // write byte enable
      input  [(9 << (LOG2WIDTH_WR-3))-1:0] data_in   // data out
    );
376
    
377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404
    localparam  PWIDTH_WR = (LOG2WIDTH_WR > 2)? (9 << (LOG2WIDTH_WR - 3)): (1 << LOG2WIDTH_WR);
    localparam  PWIDTH_RD = 36;
    localparam  WIDTH_WR  = 1 << LOG2WIDTH_WR;
    localparam  WIDTH_WRP = 1 << (LOG2WIDTH_WR-3);

    wire [WIDTH_WR+15:0] data_in_ext = {16'b0,data_in[WIDTH_WR-1:0]};
    wire          [15:0] data_in16=data_in_ext[15:0];

    wire [WIDTH_WRP+1:0] datap_in_ext = {2'b0,data_in[WIDTH_WR+:WIDTH_WRP]};
    wire           [1:0] datap_in2=      datap_in_ext[1:0];

    RAMB18E1
    #(
    .RSTREG_PRIORITY_A         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .RSTREG_PRIORITY_B         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .DOA_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .DOB_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .READ_WIDTH_A              (PWIDTH_RD),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .READ_WIDTH_B              (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_A             (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_B             (PWIDTH_WR),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .RAM_MODE                  ("SDP"),          // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
    .WRITE_MODE_A              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .WRITE_MODE_B              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
    .SIM_COLLISION_CHECK       ("ALL"),          // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
    .INIT_FILE                 ("NONE"),         // "NONE" or filename with initialization data
    .SIM_DEVICE                ("7SERIES")      // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
405 406 407
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443
    ) RAMB36E1_i
    (
        // Port A (Read port in SDP mode):
        .DOADO           (data_out[15:0]), // Port A data/LSB data[15:0], output
        .DOPADOP         (data_out[17:16]),// Port A parity/LSB parity[3:0], output
        .DIADI           (16'h0),          // Port A data/LSB data[31:0], input
        .DIPADIP         (2'h0),           // Port A parity/LSB parity[3:0], input
        .ADDRARDADDR     ({raddr[8:0],5'b11111}),  // Port A (read port in SDP) address [15:0]. used from [14] down, unused should be high, input
        .CLKARDCLK       (rclk),           // Port A (read port in SDP) clock, input
        .ENARDEN         (ren),            // Port A (read port in SDP) Enable, input
        .REGCEAREGCE     (regen),          // Port A (read port in SDP) register enable, input
        .RSTRAMARSTRAM   (1'b0),           // Port A (read port in SDP) set/reset, input
        .RSTREGARSTREG   (1'b0),           // Port A (read port in SDP) register set/reset, input
        .WEA             (2'b0),           // Port A (read port in SDP) Write Enable[3:0], input
        // Port B
        .DOBDO           (data_out[33:18]),// Port B data/MSB data[31:0], output
        .DOPBDOP         (data_out[35:34]),// Port B parity/MSB parity[3:0], output
        .DIBDI           (data_in16),      // Port B data/MSB data[31:0], input
        .DIPBDIP         (datap_in2),      // Port B parity/MSB parity[3:0], input
        .ADDRBWRADDR     ({waddr,{LOG2WIDTH_WR{1'b1}}}), // Port B (write port in SDP) address [15:0]. used from [14] down, unused should be high, input
        .CLKBWRCLK       (wclk),           // Port B (write port in SDP) clock, input
        .ENBWREN         (we),             // Port B (write port in SDP) Enable, input
        .REGCEB          (1'b0),           // Port B (write port in SDP) register enable, input
        .RSTRAMB         (1'b0),           // Port B (write port in SDP) set/reset, input
        .RSTREGB         (1'b0),           // Port B (write port in SDP) register set/reset, input
        .WEBWE           (web[3:0])        // Port B (write port in SDP) Write Enable[7:0], input
    );

endmodule

// Write port 64 bita, read port - less than 64 bits
module  ram18p_32w_lt32r
#(
  parameter integer REGISTERS    = 0, // 1 - registered output
//  parameter integer LOG2WIDTH_WR = 4,  // WIDTH= 1  << LOG2WIDTH
  parameter integer LOG2WIDTH_RD = 4   // WIDTH= 1  << LOG2WIDTH
444 445 446 447
`ifdef PRELOAD_BRAMS
    ,
    `include "includes/ram18_declare_init.vh"
`endif
448 449 450 451 452 453 454 455 456 457 458 459 460 461
 )
   (
      input                                rclk,     // clock for read port
      input            [13-LOG2WIDTH_RD:0] raddr,    // read address
      input                                ren,      // read port enable
      input                                regen,    // output register enable
      output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out, // data out
      
      input                                wclk,     // clock for read port
      input                          [8:0] waddr,    // write address
      input                                we,       // write port enable
      input                         [ 3:0] web,      // write byte enable
      input                         [35:0] data_in   // data out
    );
Andrey Filippov's avatar
Andrey Filippov committed
462
    localparam  PWIDTH_WR = 36;
463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485
    localparam  PWIDTH_RD = (LOG2WIDTH_RD > 2)? (9 << (LOG2WIDTH_RD - 3)): (1 << LOG2WIDTH_RD);
    localparam  WIDTH_RD  = 1 << LOG2WIDTH_RD;
    localparam  WIDTH_RDP = 1 << (LOG2WIDTH_RD-3);
    wire          [15:0] data_out16;
    wire          [ 1:0] datap_out2;
    assign data_out={datap_out2[WIDTH_RDP-1:0], data_out16[WIDTH_RD-1:0]};
    RAMB18E1
    #(
    .RSTREG_PRIORITY_A         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .RSTREG_PRIORITY_B         ("RSTREG"),       // Valid: "RSTREG" or "REGCE"
    .DOA_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .DOB_REG                   (REGISTERS),      // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
    .READ_WIDTH_A              (PWIDTH_RD),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .READ_WIDTH_B              (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_A             (0),              // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .WRITE_WIDTH_B             (PWIDTH_WR),      // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
    .RAM_MODE                  ("SDP"),          // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
    .WRITE_MODE_A              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .WRITE_MODE_B              ("WRITE_FIRST"),  // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
    .RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
    .SIM_COLLISION_CHECK       ("ALL"),          // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
    .INIT_FILE                 ("NONE"),         // "NONE" or filename with initialization data
    .SIM_DEVICE                ("7SERIES")       // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
486 487 488
`ifdef PRELOAD_BRAMS
    `include "includes/ram18_pass_init.vh"
`endif
489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527
    ) RAMB36E1_i
    (
        // Port A (Read port in SDP mode):
        .DOADO           (data_out16),     // Port A data/LSB data[15:0], output
        .DOPADOP         (datap_out2),     // Port A parity/LSB parity[1:0], output
        .DIADI           (data_in[15:0]),  // Port A data/LSB data[15:0], input
        .DIPADIP         (data_in[17:16]), // Port A parity/LSB parity[1:0], input
        .ADDRARDADDR     ({raddr,{LOG2WIDTH_RD{1'b1}}}),  // Port A (read port in SDP) address [13:0], unused should be high, input
        .CLKARDCLK       (rclk),           // Port A (read port in SDP) clock, input
        .ENARDEN         (ren),            // Port A (read port in SDP) Enable, input
        .REGCEAREGCE     (regen),          // Port A (read port in SDP) register enable, input
        .RSTRAMARSTRAM   (1'b0),           // Port A (read port in SDP) set/reset, input
        .RSTREGARSTREG   (1'b0),           // Port A (read port in SDP) register set/reset, input
        .WEA             (2'b0),           // Port A (read port in SDP) Write Enable[1:0], input
        // Port B
        .DOBDO           (),               // Port B data/MSB data[15:0], output
        .DOPBDOP         (),               // Port B parity/MSB parity[1:0], output
        .DIBDI           (data_in[33:18]), // Port B data/MSB data[15:0], input
        .DIPBDIP         (data_in[35:34]), // Port B parity/MSB parity[1:0], input
        .ADDRBWRADDR({waddr[8:0],5'b11111}), // Port B (write port in SDP) address [13:0], unused should be high, input
        .CLKBWRCLK       (wclk),           // Port B (write port in SDP) clock, input
        .ENBWREN         (we),             // Port B (write port in SDP) Enable, input
        .REGCEB          (1'b0),           // Port B (write port in SDP) register enable, input
        .RSTRAMB         (1'b0),           // Port B (write port in SDP) set/reset, input
        .RSTREGB         (1'b0),           // Port B (write port in SDP) register set/reset, input
        .WEBWE           (web[3:0])        // Port B (write port in SDP) Write Enable[7:0], input
    );

endmodule

module  ram18p_dummy
#(
  parameter integer LOG2WIDTH_RD = 4   // WIDTH= 1  << LOG2WIDTH
 )
   (
      output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out // data out
   );
   assign data_out=0;
endmodule