x393.v 201 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11
/*!
 * <b>Module:</b>  x393
 * @file x393.v
 * @date 2015-01-13  
 * @author Andrey Filippov
 *
 * @copyright Copyright (c) 2015 Elphel, Inc.
 *      
 * @brief Elphel NC393 camera FPGA top module
 *
 * <b>License:</b>
12 13 14 15 16 17 18 19 20 21 22 23 24
 *
 * x393.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 *  x393.v is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
25 26 27 28 29 30
 *
 * Additional permission under GNU GPL version 3 section 7:
 * If you modify this Program, or any covered work, by linking or combining it
 * with independent modules provided by the FPGA vendor only (this permission
 * does not extend to any 3-rd party modules, "soft cores" or macros) under
 * different license terms solely for the purpose of generating binary "bitstream"
31
 * files and/or simulating the code, the copyright holders of this Program give
32 33
 * you the right to distribute the covered work without those independent modules
 * as long as the source code for them is available from the FPGA vendor free of
Andrey Filippov's avatar
Andrey Filippov committed
34
 * charge, and there is no dependence on any encrypted modules for simulating of
35 36 37
 * the combined code. This permission applies to you if the distributed code
 * contains all the components and scripts required to completely simulate it
 * with at least one of the Free Software programs.
38
 */
39
`timescale 1ns/1ps
40
`include "system_defines.vh" 
41
module  x393 #(
Andrey Filippov's avatar
Andrey Filippov committed
42
`include "includes/x393_parameters.vh" // SuppressThisWarning VEditor - some not used
43
)(
44
    // Sensors interface: I/O pads, pin names match circuit diagram (each sensor)
45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89
`ifdef HISPI
    input                  [3:0] sns1_dp,
    input                  [3:0] sns1_dn,
    inout                  [7:4] sns1_dp74, // other non-diff signals
    inout                  [7:4] sns1_dn74, // other non-diff signals
    input                        sns1_clkp,
    input                        sns1_clkn,
    inout                        sns1_scl,
    inout                        sns1_sda,
    inout                        sns1_ctl,
    inout                        sns1_pg,
    
    input                  [3:0] sns2_dp,
    input                  [3:0] sns2_dn,
    inout                  [7:4] sns2_dp74, // other non-diff signals
    inout                  [7:4] sns2_dn74, // other non-diff signals
    input                        sns2_clkp,
    input                        sns2_clkn,
    inout                        sns2_scl,
    inout                        sns2_sda,
    inout                        sns2_ctl,
    inout                        sns2_pg,

    input                  [3:0] sns3_dp,
    input                  [3:0] sns3_dn,
    inout                  [7:4] sns3_dp74, // other non-diff signals
    inout                  [7:4] sns3_dn74, // other non-diff signals
    input                        sns3_clkp,
    input                        sns3_clkn,
    inout                        sns3_scl,
    inout                        sns3_sda,
    inout                        sns3_ctl,
    inout                        sns3_pg,

    input                  [3:0] sns4_dp,
    input                  [3:0] sns4_dn,
    inout                  [7:4] sns4_dp74, // other non-diff signals
    inout                  [7:4] sns4_dn74, // other non-diff signals
    input                        sns4_clkp,
    input                        sns4_clkn,
    inout                        sns4_scl,
    inout                        sns4_sda,
    inout                        sns4_ctl,
    inout                        sns4_pg,
`else
90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124
    inout                  [7:0] sns1_dp,
    inout                  [7:0] sns1_dn,
    inout                        sns1_clkp,
    inout                        sns1_clkn,
    inout                        sns1_scl,
    inout                        sns1_sda,
    inout                        sns1_ctl,
    inout                        sns1_pg,
    
    inout                  [7:0] sns2_dp,
    inout                  [7:0] sns2_dn,
    inout                        sns2_clkp,
    inout                        sns2_clkn,
    inout                        sns2_scl,
    inout                        sns2_sda,
    inout                        sns2_ctl,
    inout                        sns2_pg,
    
    inout                  [7:0] sns3_dp,
    inout                  [7:0] sns3_dn,
    inout                        sns3_clkp,
    inout                        sns3_clkn,
    inout                        sns3_scl,
    inout                        sns3_sda,
    inout                        sns3_ctl,
    inout                        sns3_pg,
    
    inout                  [7:0] sns4_dp,
    inout                  [7:0] sns4_dn,
    inout                        sns4_clkp,
    inout                        sns4_clkn,
    inout                        sns4_scl,
    inout                        sns4_sda,
    inout                        sns4_ctl,
    inout                        sns4_pg,
125
`endif    
126 127
    // GPIO pins (1.5V): assigned in 10389: [1:0] - i2c, [5:2] - gpio, [GPIO_N-1:6] - sync i/o
    inout           [GPIO_N-1:0] gpio_pins,
128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146
    // DDR3 interface
    output                       SDRST, // DDR3 reset (active low)
    output                       SDCLK, // DDR3 clock differential output, positive
    output                       SDNCLK,// DDR3 clock differential output, negative
    output  [ADDRESS_NUMBER-1:0] SDA,   // output address ports (14:0) for 4Gb device
    output                 [2:0] SDBA,  // output bank address ports
    output                       SDWE,  // output WE port
    output                       SDRAS, // output RAS port
    output                       SDCAS, // output CAS port
    output                       SDCKE, // output Clock Enable port
    output                       SDODT, // output ODT port

    inout                 [15:0] SDD,   // DQ  I/O pads
    output                       SDDML, // LDM  I/O pad (actually only output)
    inout                        DQSL,  // LDQS I/O pad
    inout                        NDQSL, // ~LDQS I/O pad
    output                       SDDMU, // UDM  I/O pad (actually only output)
    inout                        DQSU,  // UDQS I/O pad
    inout                        NDQSU,
147 148 149 150 151
    // Clock inputs
    input                        memclk,  // M5
    input                        ffclk0p, // Y12
    input                        ffclk0n, // Y11
    input                        ffclk1p, // W14
152 153 154 155 156 157 158 159 160 161
    input                        ffclk1n,  // W13
    
// SATA data interface
    input                        RXN, 
    input                        RXP,
    output                       TXN,
    output                       TXP,
// sata clocking iface
    input                        EXTCLK_P,
    input                        EXTCLK_N
162
    
163
);
164
`include "fpga_version.vh"
165
// Source for reset and clock
166 167 168
`ifndef IGNORE_ATTR
    (* KEEP = "TRUE" *)
`endif    
Andrey Filippov's avatar
Andrey Filippov committed
169
    wire    [3:0]     fclk;           // PL Clocks [3:0], output
170 171 172
`ifndef IGNORE_ATTR
    (* KEEP = "TRUE" *)
`endif    
Andrey Filippov's avatar
Andrey Filippov committed
173
    wire    [3:0]     frst;           // PL Clocks [3:0], output
174 175
    
// AXI write interface signals
Andrey Filippov's avatar
Andrey Filippov committed
176
    wire           axi_aclk;          // clock - should be buffered
177
    wire           axi_grst;          // reset, active high, global (try to get rid of) - trying, removed BUFG
178
// AXI Write Address
Andrey Filippov's avatar
Andrey Filippov committed
179 180 181 182
    wire   [31:0]  maxi0_awaddr;      // AWADDR[31:0], input
    wire           maxi0_awvalid;     // AWVALID, input
    wire           maxi0_awready;     // AWREADY, output
    wire   [11:0]  maxi0_awid;        // AWID[11:0], input
183 184 185
    wire   [ 3:0]  maxi0_awlen;       // AWLEN[3:0], input
    wire   [ 1:0]  maxi0_awsize;      // AWSIZE[1:0], input
    wire   [ 1:0]  maxi0_awburst;     // AWBURST[1:0], input
186
// AXI PS Master GP0: Write Data
187 188 189 190 191 192
    wire   [31:0]  maxi0_wdata;       // WDATA[31:0], input
    wire           maxi0_wvalid;      // WVALID, input
    wire           maxi0_wready;      // WREADY, output
    wire   [11:0]  maxi0_wid;         // WID[11:0], input
    wire           maxi0_wlast;       // WLAST, input
    wire   [ 3:0]  maxi0_wstb;        // WSTRB[3:0], input
Andrey Filippov's avatar
Andrey Filippov committed
193
// AXI PS Master GP0: Write response
194 195 196 197
    wire           maxi0_bvalid;      // BVALID, output
    wire           maxi0_bready;      // BREADY, input
    wire   [11:0]  maxi0_bid;         // BID[11:0], output
    wire   [ 1:0]  maxi0_bresp;       // BRESP[1:0], output
198 199
   
// BRAM (and other write modules) interface from AXI write
200 201 202 203 204
    wire [AXI_WR_ADDR_BITS-1:0] axiwr_pre_awaddr; // same as awaddr_out, early address to decode and return dev_ready
    wire           axiwr_start_burst; // start of write burst, valid pre_awaddr, save externally to control ext. dev_ready multiplexer
    wire           axiwr_dev_ready;   // extrernal combinatorial ready signal, multiplexed from different sources according to pre_awaddr@start_burst
    wire           axiwr_wclk;
    wire  [AXI_WR_ADDR_BITS-1:0] axiwr_waddr;
Andrey Filippov's avatar
Andrey Filippov committed
205
    wire           axiwr_wen;         // external memory write enable, (internally combined with registered dev_ready
206
// SuppressWarnings VEditor unused (yet?) 
207 208
    wire    [3:0]  axiwr_bram_wstb; 
    wire   [31:0]  axiwr_wdata;
209 210

 // AXI Read Address   
211 212 213 214 215 216 217
    wire   [31:0]  maxi0_araddr;  // ARADDR[31:0], input 
    wire           maxi0_arvalid; // ARVALID, input
    wire           maxi0_arready; // ARREADY, output
    wire   [11:0]  maxi0_arid;    // ARID[11:0], input
    wire   [ 3:0]  maxi0_arlen;   // ARLEN[3:0], input
    wire   [ 1:0]  maxi0_arsize;  // ARSIZE[1:0], input
    wire   [ 1:0]  maxi0_arburst; // ARBURST[1:0], input
218
// AXI Read Data
219 220 221 222 223 224
    wire   [31:0]  maxi0_rdata;   // RDATA[31:0], output
    wire           maxi0_rvalid;  // RVALID, output
    wire           maxi0_rready;  // RREADY, input
    wire   [11:0]  maxi0_rid;     // RID[11:0], output
    wire           maxi0_rlast;   // RLAST, output
    wire   [ 1:0]  maxi0_rresp;
225 226

// External memory synchronization
227 228 229
    wire [AXI_RD_ADDR_BITS-1:0] axird_pre_araddr; // same as awaddr_out, early address to decode and return dev_ready
    wire           axird_start_burst; // start of read burst, valid pre_araddr, save externally to control ext. dev_ready multiplexer
    wire           axird_dev_ready;   // extrernal combinatorial ready signal, multiplexed from different sources according to pre_araddr@start_burst
230 231
// External memory interface   
// SuppressWarnings VEditor unused (yet?) - use mclk 
232
    wire           axird_bram_rclk;  // == axi_aclk      .rclk(aclk),                  // clock for read port
233
   // while only status provides read data, the next signals are not used (relies on axird_pre_araddr, axird_start_burst)
234 235 236 237
    wire  [AXI_RD_ADDR_BITS-1:0] axird_raddr; //   .raddr(read_in_progress?read_address[9:0]:10'h3ff),    // read address
    wire           axird_ren;   //      .ren(bram_reg_re_w) ,      // read port enable
    wire           axird_regen; //   .regen(bram_reg_re_w),        // output register enable
    wire  [31:0]   axird_rdata;  //      .data_out(rdata[31:0]),       // data out
238
//   wire  [31:0]   port0_rdata;  //
239 240 241 242 243
    wire  [31:0]   status_rdata;  //
    wire           status_selected;
    wire  [31:0]   readback_rdata;  //
    wire           readback_selected;
    wire  [31:0]   mcntrl_axird_rdata; // read data from the memory controller 
244 245


246
   
247 248 249 250 251 252 253
    wire           mcntrl_axird_selected; // memory controller has valid data output on mcntrl_axird_rdata 
    reg            status_selected_ren;         // status_selected (set at axird_start_burst) delayed when ren is active
    reg            readback_selected_ren;
    reg            mcntrl_axird_selected_ren;   // mcntrl_axird_selected (set at axird_start_burst) delayed when ren is active
    reg            status_selected_regen;       // status_selected (set at axird_start_burst) delayed when ren is active, then when regen (normally 2 cycles)
    reg            readback_selected_regen;
    reg            mcntrl_axird_selected_regen; // mcntrl_axird_selected (set at axird_start_burst) delayed when ren is active, then when regen (normally 2 cycles)
254

255
   // global clocks
256
    wire           mclk; // global clock, memory controller, command/status network (currently 200MHz)
Andrey Filippov's avatar
Andrey Filippov committed
257
    wire           mcntrl_locked; // to generate syn resets
258 259
    wire           ref_clk; // global clock for idelay_ctrl calibration
    wire           hclk; // global clock, axi_hp (150MHz) derived from aclk_in = 50MHz
260 261
   
    // sensor pixel rate clock likely to originate from the external clock
262 263 264
 //TODO: Create missing clocks   
    
    wire           pclk;   // global clock, sensor pixel rate (96 MHz)
265
`ifdef USE_PCLK2X    
266
    wire           pclk2x; // global clock, sensor double pixel rate (192 MHz)
267
`endif
268
   // compressor pixel rate can be adjusted independently
269
    wire           xclk;   // global clock, compressor pixel rate (100 MHz)?
270
`ifdef  USE_XCLK2X     
271
    wire           xclk2x; // global clock, compressor double pixel rate (200 MHz)
272
`endif   
273
    wire           camsync_clk; // global clock used for external synchronization. 96MHz in x353.
274
                               //  Make it independent of pixel, compressor and mclk so it can be frozen
275 276
    wire           logger_clk;  // global clock for the event logger. Use 100 MHz, shared with camsync_clk
    assign logger_clk = camsync_clk;
Andrey Filippov's avatar
Andrey Filippov committed
277 278 279 280 281 282 283 284 285
    
    wire           mrst; // @ posedge mclk
    wire           prst; // @ posedge pclk
    wire           xrst; // @ posedge xclk
    wire           crst; // @ posedge camsync_clk
    wire           lrst; // @ posedge logger_clk;
    wire           arst; // @ posedge axi_aclk;
    wire           hrst; // @ posedge hclk;
    
286 287 288 289
    wire           locked_sync_clk;
    wire           locked_xclk;
    wire           locked_pclk;
    wire           locked_hclk;
Andrey Filippov's avatar
Andrey Filippov committed
290 291 292 293
    
    wire           idelay_ctrl_reset; // to reset idelay_cntrl
    
    
294
   
295
    wire           time_ref; // RTC reference: integer number of microseconds, less than mclk/2. Not a global clock
296

297
    wire [11:0] tmp_debug; 
298
   
299
//   reg    select_port0; // May be used later!
300 301
    wire axiwr_dev_busy;
    wire axird_dev_busy;
302
   
303
   //TODO: The following is the interface to the frame-based command sequencer (not yet implemnted)        
304 305 306 307
    wire [AXI_WR_ADDR_BITS-1:0] cseq_waddr;   // command sequencer write address (output to command multiplexer)
    wire                        cseq_wr_en;   // command sequencer write enable (output to command multiplexer) - keep until cseq_ackn received
    wire                 [31:0] cseq_wdata;   // command sequencer write data (output to command multiplexer) 
    wire                        cseq_ackn;    // ackn to command sequencer, command sequencer should de-assert cseq_wr_en
308 309
    
   // Signals for the frame sequnecer/mux
310 311 312 313
    wire [4 * AXI_WR_ADDR_BITS-1:0] frseq_waddr; 
    wire                      [3:0] frseq_valid;
    wire                    [127:0] frseq_wdata; 
    wire                      [3:0] frseq_ackn;
314 315 316
    wire                      [3:0] frseq_is;
    wire                      [3:0] frseq_im;
    wire                      [3:0] frseq_irq = frseq_is & frseq_im; // frame interrupts
317
    
318
// parallel address/data - where higher bandwidth (single-cycle) is needed        
319 320
    wire [AXI_WR_ADDR_BITS-1:0] par_waddr; 
    wire                 [31:0] par_data; 
321

Andrey Filippov's avatar
Andrey Filippov committed
322 323


Andrey Filippov's avatar
Andrey Filippov committed
324
    wire                  [7:0] cmd_root_ad;       // multiplexed byte-wide serialized address/data to slave devices (AL-AH-D0-D1-D2-D3), may contain less cycles 
325 326 327 328 329 330
    wire                        cmd_root_stb;      // strobe marking the first of 1-6 a/d bytes and also data valid for par_waddr and par_data

    wire                  [7:0] status_root_ad;    // Root status byte-wide address/data 
    wire                        status_root_rq;    // Root status request  
    wire                        status_root_start; // Root status packet transfer start (currently with 0 latency from status_root_rq)

331 332 333
    wire                  [7:0] status_mcontr_ad;    // Memory controller status byte-wide address/data 
    wire                        status_mcontr_rq;    // Memory controller status request  
    wire                        status_mcontr_start; // Memory controller status packet transfer start (currently with 0 latency from status_root_rq)
334
// Not yet connected
335 336 337 338
    wire                  [7:0] status_membridge_ad;    // membridge (afi to ddr3) status byte-wide address/data 
    wire                        status_membridge_rq;    // membridge (afi to ddr3) status request  
    wire                        status_membridge_start; //membridge (afi to ddr3) status packet transfer start (currently with 0 latency from status_root_rq)

339 340
//    wire                  [7:0] status_other_ad = 0; // Other status byte-wide address/data
//    wire                        status_other_rq = 0; // Other status request   
341
//    wire                        status_other_start;  //
342

343

344 345 346
    wire                  [7:0] status_test01_ad;    // Test module status byte-wide address/data 
    wire                        status_test01_rq;    // Test module status request  
    wire                        status_test01_start; // Test module status packet transfer start (currently with 0 latency from status_root_rq)
347 348


349 350
    wire                  [7:0] status_sensor_ad;     // Other status byte-wide address/data
    wire                        status_sensor_rq;     // Other status request   
351
    wire                        status_sensor_start;  //
352 353 354

    wire                  [7:0] status_compressor_ad; // Other status byte-wide address/data
    wire                        status_compressor_rq; // Other status request   
355
    wire                        status_compressor_start;  //
356

357

358
// TODO: Add sequencer status (16+2) bits of current frame number. Ose 'h31 as the address, 'h702 (701..703 were empty) to program
359 360 361
    wire                  [7:0] status_sequencer_ad; // Other status byte-wide address/data
    wire                        status_sequencer_rq; // Other status request   
    wire                        status_sequencer_start;  // S uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)
362
    
363 364 365 366 367 368 369 370 371

    wire                  [7:0] status_logger_ad; // Other status byte-wide address/data
    wire                        status_logger_rq; // Other status request   
    wire                        status_logger_start;  // S uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)

    wire                  [7:0] status_timing_ad; // Other status byte-wide address/data
    wire                        status_timing_rq; // Other status request   
    wire                        status_timing_start;  // S uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)

372 373 374 375
    wire                  [7:0] status_gpio_ad; // Other status byte-wide address/data
    wire                        status_gpio_rq; // Other status request   
    wire                        status_gpio_start;  // S uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)

376 377 378 379
    wire                  [7:0] status_saxi1wr_ad; // saxi1 - logger data Other status byte-wide address/data
    wire                        status_saxi1wr_rq; // Other status request   
    wire                        status_saxi1wr_start;  // S uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)

380 381 382 383
    wire                  [7:0] status_clocks_ad; // saxi1 - logger data Other status byte-wide address/data
    wire                        status_clocks_rq; // Other status request   
    wire                        status_clocks_start;  // S uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)

384 385 386 387 388 389
`ifdef DEBUG_SENS_MEM_PAGES
    wire                  [7:0] dbg_rpage;   
    wire                  [7:0] dbg_wpage;   
`endif              


390 391 392 393 394
`ifdef DEBUG_RING
    wire                  [7:0] status_debug_ad; // saxi1 - logger data Other status byte-wide address/data
    wire                        status_debug_rq; // Other status request   
    wire                        status_debug_start;  // S uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)
    
395
    localparam DEBUG_RING_LENGTH = 3; // increase here, insert new after master 
396
    
397 398
    wire [DEBUG_RING_LENGTH:0]    debug_ring; // TODO: adjust number of bits
    wire                          debug_sl;   // debug shift/load:  0 - idle, (1,0) - shift, (1,1) - load
399
`endif    
400
    // Insert register layer if needed
401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417
    reg  [7:0] cmd_mcontr_ad;
    reg        cmd_mcontr_stb;
    
    reg  [7:0] cmd_test01_ad;
    reg        cmd_test01_stb;
    
    reg  [7:0] cmd_membridge_ad;
    reg        cmd_membridge_stb;

    reg  [7:0] cmd_sensor_ad;
    reg        cmd_sensor_stb;

    reg  [7:0] cmd_compressor_ad;
    reg        cmd_compressor_stb;

    reg  [7:0] cmd_sequencer_ad;
    reg        cmd_sequencer_stb;
418

419 420 421 422 423
    reg  [7:0] cmd_logger_ad;
    reg        cmd_logger_stb;

    reg  [7:0] cmd_timing_ad;
    reg        cmd_timing_stb;
424

425 426 427
    reg  [7:0] cmd_gpio_ad;
    reg        cmd_gpio_stb;

428 429 430
    reg  [7:0] cmd_saxi1wr_ad;
    reg        cmd_saxi1wr_stb;

431 432 433
    reg  [7:0] cmd_clocks_ad;
    reg        cmd_clocks_stb;

434 435 436 437
`ifdef DEBUG_RING
    reg  [7:0] cmd_debug_ad;
    reg        cmd_debug_stb;
`endif
438
// membridge
439 440
    wire                        frame_start_chn1; // input
    wire                        next_page_chn1; // input
441
    wire                        cmd_wrmem_chn1;
442 443 444 445
    wire                        page_ready_chn1; // output
    wire                        frame_done_chn1; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn1; // output[15:0] 
    wire                        suspend_chn1; // input
446 447 448 449 450 451 452 453 454 455 456 457 458
    wire                        xfer_reset_page1_rd;
    wire                        buf_wpage_nxt_chn1;
    wire                        buf_wr_chn1;
    wire                 [63:0] buf_wdata_chn1; 
    wire                        xfer_reset_page1_wr;
    wire                        rpage_nxt_chn1;
    wire                        buf_rd_chn1;
    wire                 [63:0] buf_rdata_chn1; 
    
    
    
    
//mcntrl393_test01
459 460 461 462 463
    wire                        frame_start_chn2;  // input
    wire                        next_page_chn2;    // input
    wire                        page_ready_chn2; // output
    wire                        frame_done_chn2; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn2; // output[15:0] 
464
 //   wire  [LAST_FRAME_BITS-1:0] frame_number_chn2; // output[15:0] 
465 466 467 468 469 470
    wire                        suspend_chn2; // input
    wire                        frame_start_chn3; // input
    wire                        next_page_chn3; // input
    wire                        page_ready_chn3; // output
    wire                        frame_done_chn3; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn3; // output[15:0] 
471
//    wire  [LAST_FRAME_BITS-1:0] frame_number_chn3; // output[15:0] 
472 473 474 475 476 477
    wire                        suspend_chn3; // input
    wire                        frame_start_chn4; // input
    wire                        next_page_chn4; // input
    wire                        page_ready_chn4; // output
    wire                        frame_done_chn4; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn4; // output[15:0]
478
//    wire  [LAST_FRAME_BITS-1:0] frame_number_chn4; // output[15:0] 
479
    wire                        suspend_chn4; // input
480 481 482
   
    reg                         axi_rst_pre=1'b1;
    wire                        comb_rst; //=~frst[0] | frst[1];
483

484 485
    wire                 [63:0] gpio_in;
    
486
    // signals for sensor393 (in/outs as seen for the sensor393)
487
    wire                  [3:0] sens_rpage_set;  //    (), // input
488
    wire                  [3:0] sens_frame_run;  // @mclk from mcntrl393 - enable data to memory buffer
489 490 491
    wire                  [3:0] sens_rpage_next; //    (), // input
    wire                  [3:0] sens_buf_rd;     //    (), // input
    wire                [255:0] sens_buf_dout;   //    (), // output[63:0] 
492
    wire                  [3:0] sens_page_written;     //   single mclk pulse: buffer page (full or partial) is written to the memory buffer 
493
// TODO: Add counter(s) to count sens_xfer_skipped pulses    
Andrey Filippov's avatar
Andrey Filippov committed
494
    wire                  [3:0] sens_xfer_skipped;         // single mclk pulse on every skipped (not written) block to record error statistics // SuppressThisWarning VEditor - unused
495 496
    wire                  [3:0] sens_first_wr_in_frame;    // single mclk pulse on first write block in each frame
    
497 498 499
    wire                        trigger_mode; //       (), // input
    wire                  [3:0] trig_in;                  // input[3:0] 
        
500 501
    wire                  [3:0] sof_out_pclk; //       (), // output[3:0] // SuppressThisWarning VEditor - (yet) unused
    wire                  [3:0] eof_out_pclk; //       (), // output[3:0] // SuppressThisWarning VEditor - (yet) unused
502 503 504 505
    wire                  [3:0] sof_out_mclk; // Use for sequencer and to start memory write
// if sof_out_mclk is applied to both sequencer and memory controller (as it is now) reprogramming of the sensor->memory
// parameters will be applied to the next frame TODO: Verify that sequencer will always be later than memory controller
// handling this pulse (should be so). Make sure parameters are applied in ASAP in single-trigger mode
506 507
    wire                  [3:0] sof_late_mclk; //      (), // output[3:0] 
        
508 509
    wire [4 * NUM_FRAME_BITS - 1:0] frame_num;            //       (), // input[15:0] 
    wire [4 * NUM_FRAME_BITS - 1:0] frame_num_compressed; //      (), // input[15:0] 
510 511 512 513 514 515 516 517 518 519
    // signals for compressor393 (in/outs as seen for the sensor393)
    // per-channel memory buffers interface

    wire   [3:0] cmprs_xfer_reset_page_rd;  // input
    wire   [3:0] cmprs_buf_wpage_nxt;       // input
    wire   [3:0] cmprs_buf_we;              // input
    wire [255:0] cmprs_buf_din;             // input[63:0] 
    wire   [3:0] cmprs_page_ready;          // input
    wire   [3:0] cmprs_next_page;           // output

520
// per-channel master (sensor)/slave (compressor) synchronization (compressor wait until sensor provided data)
521 522 523
    wire                     [3:0] cmprs_frame_start_dst; // output - trigger receive (tiledc) memory channel (it will take care of single/repetitive
                                                          // these output either follows vsync_late (reclocks it) or generated in non-bonded mode
                                                          // (compress from memory)
524 525
    wire                     [3:0] cmprs_frame_start_conf; // memory controller confirmed cmprs_frame_start_dst - normally delayed by 1 clock,
                                                           // or more if there were outstanding memory transactions.                                                           
526 527 528 529 530 531 532 533
    wire [4*FRAME_HEIGHT_BITS-1:0] cmprs_line_unfinished_src; // input[15:0] number of the current (unfinished ) line, in the source (sensor)
                                                          //  channel (RELATIVE TO FRAME, NOT WINDOW?)
    wire   [4*LAST_FRAME_BITS-1:0] cmprs_frame_number_src;// input[15:0] current frame number (for multi-frame ranges) in the source (sensor) channel
    wire                     [3:0] cmprs_frame_done_src;  // input single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory 
                                                          // frame_done_src is later than line_unfinished_src/ frame_number_src changes
                                                          // Used withe a single-frame buffers
    wire [4*FRAME_HEIGHT_BITS-1:0] cmprs_line_unfinished_dst; // input[15:0] number of the current (unfinished ) line in this (compressor) channel
    wire   [4*LAST_FRAME_BITS-1:0] cmprs_frame_number_dst; // input[15:0] current frame number (for multi-frame ranges) in this (compressor channel
534
    wire                     [3:0] cmprs_frames_in_sync;   // cmprs_frame_number_dst is valid (in bonded mode) 
535 536 537
    wire                     [3:0] cmprs_frame_done_dst;   // input single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
                                                           // use as 'eot_real' in 353 
    wire                     [3:0] cmprs_suspend;          // output suspend reading data for this channel - waiting for the source data
538
//    wire                     [3:0] cmprs_master_follow;    // compressor memory is in dependent mode, frame number should be copied from sesnor, not reset to 0
539 540
    wire   [4*LAST_FRAME_BITS-1:0] cmprs_frame_number_finished;  // frame numbers compressed
    
541 542

// Timestamp messages (@mclk) - combine to a single ts_data?    
543 544
    wire                      [3:0] ts_pre_stb; // input[ 3:0] 4 compressor channels
    wire                     [31:0] ts_data;    // input[31:0] 4 compressor channels
545 546

// Timestamp messages (@mclk) - combine to a single ts_data?    
547 548
    wire                            ts_pre_logger_stb; // input logger timestamp sync (@logger_clk)
    wire                      [7:0] ts_logegr_data;    // input[7:0] loger timestamp data (@logger_clk) 
549 550
   
// Compressor signals for interrupts generation    
551 552
    wire                      [3:0] eof_written_mclk;  // output // SuppressThisWarning VEditor - (yet) unused
    wire                      [3:0] stuffer_done_mclk; // output// SuppressThisWarning VEditor - (yet) unused
553
   
554
    wire                      [3:0] cmprs_irq;         // compressor done, data confirmed written to memory)
555
    wire                      [3:0] mult_saxi_irq;     // interrupts from mult_saxi channels
556
    wire                            membridge_irq;     // interrupt from membridge done
557
   
558
// Compressor frame synchronization
559 560
  
// GPIO internal signals (for camera GPIOs, not Zynq PS GPIO)
561 562 563 564 565 566 567
    wire               [GPIO_N-1:0] gpio_rd;          // data read from the external GPIO pins 
    wire               [GPIO_N-1:0] gpio_camsync;     // data out from the camsync module 
    wire               [GPIO_N-1:0] gpio_camsync_en;  // output enable from the camsync module 
    wire               [GPIO_N-1:0] gpio_db;          // data out from the port B (unused,  Motors in x353)
    wire               [GPIO_N-1:0] gpio_db_en;       // output enable from the port B (unused,  Motors in x353)  
    wire               [GPIO_N-1:0] gpio_logger;      // data out from the event_logger module 
    wire               [GPIO_N-1:0] gpio_logger_en;   // output enable from the event_logger module 
568
    
569
   // Internal signal for toming393 (camsync) modules
570
    wire               logger_snap;
571
   
572
   // event_logger intermediate signals
573 574
    wire        [15:0] logger_out;          // output[15:0] 
    wire               logger_stb;          // output
575 576
   // event_logger intermediate signals (after mult_saxi_wr_inbuf - converted to 32 bit wide)
   
577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669
    wire               logger_saxi_en;
    wire               logger_has_burst; 
    wire               logger_read_burst;
    wire        [31:0] logger_data32; 
    wire               logger_pre_valid_chn;
    wire               idelay_ctrl_rdy;// just to keep idelay_ctrl instances

// Top level signals for SATA
// MAXIGP1 - interface with SATA controller register memory
    wire       [31:0]  maxi1_araddr;
    wire               maxi1_arvalid;
    wire               maxi1_arready;
    wire       [11:0]  maxi1_arid;
    wire       [3:0]   maxi1_arlen;
    wire       [1:0]   maxi1_arsize;
    wire       [1:0]   maxi1_arburst;
    wire       [31:0]  maxi1_rdata;
    wire               maxi1_rvalid;
    wire               maxi1_rready;
    wire       [11:0]  maxi1_rid;
    wire               maxi1_rlast;
    wire       [1:0]   maxi1_rresp;
    wire       [31:0]  maxi1_awaddr;
    wire               maxi1_awvalid;
    wire               maxi1_awready;
    wire       [11:0]  maxi1_awid;
    wire       [3:0]   maxi1_awlen;
    wire       [1:0]   maxi1_awsize;
    wire       [1:0]   maxi1_awburst;
    wire       [31:0]  maxi1_wdata;
    wire               maxi1_wvalid;
    wire               maxi1_wready;
    wire       [11:0]  maxi1_wid;
    wire               maxi1_wlast;
    wire       [3:0]   maxi1_wstb;
    wire               maxi1_bvalid;
    wire               maxi1_bready;
    wire       [11:0]  maxi1_bid;
    wire       [1:0]   maxi1_bresp;

// SAXIGP3 - SATA comntroller DMA interface with system memory
    wire        [31:0] afi3_awaddr;       // output[31:0]
    wire               afi3_awvalid;      // output
    wire               afi3_awready;      // input
    wire        [ 5:0] afi3_awid;         // output[5:0]
    wire        [ 1:0] afi3_awlock;       // output[1:0]
    wire        [ 3:0] afi3_awcache;      // output[3:0]
    wire        [ 2:0] afi3_awprot;       // output[2:0]
    wire        [ 3:0] afi3_awlen;        // output[3:0]
    wire        [ 1:0] afi3_awsize;       // output[2:0]
    wire        [ 1:0] afi3_awburst;      // output[1:0]
    wire        [ 3:0] afi3_awqos;        // output[3:0]
    wire        [63:0] afi3_wdata;        // output[63:0]
    wire               afi3_wvalid;       // output
    wire               afi3_wready;       // input
    wire        [ 5:0] afi3_wid;          // output[5:0]
    wire               afi3_wlast;        // output
    wire        [ 7:0] afi3_wstrb;        // output[7:0]
    wire               afi3_bvalid;       // input
    wire               afi3_bready;       // output
    wire        [ 5:0] afi3_bid;          // input[5:0]
    wire        [ 1:0] afi3_bresp;        // input[1:0]
    wire        [ 7:0] afi3_wcount;       // input[7:0]
    wire        [ 5:0] afi3_wacount;      // input[5:0]
    wire               afi3_wrissuecap1en;// output
    wire        [31:0] afi3_araddr;       // output[31:0]
    wire               afi3_arvalid;      // output
    wire               afi3_arready;      // input
    wire        [ 5:0] afi3_arid;         // output[5:0]
    wire        [ 1:0] afi3_arlock;       // output[1:0]
    wire        [ 3:0] afi3_arcache;      // output[3:0]
    wire        [ 2:0] afi3_arprot;       // output[2:0]
    wire        [ 3:0] afi3_arlen;        // output[3:0]
    wire        [ 1:0] afi3_arsize;       // output[2:0]
    wire        [ 1:0] afi3_arburst;      // output[1:0]
    wire        [ 3:0] afi3_arqos;        // output[3:0]
    wire        [63:0] afi3_rdata;        // input[63:0]
    wire               afi3_rvalid;       // input
    wire               afi3_rready;       // output
    wire        [ 5:0] afi3_rid;          // input[5:0]
    wire               afi3_rlast;        // input
    wire        [ 1:0] afi3_rresp;        // input[2:0]
    wire        [ 7:0] afi3_rcount;       // input[7:0]
    wire        [ 2:0] afi3_racount;      // input[2:0]
    wire               afi3_rdissuecap1en;// output

    wire               sata_irq;          // ps7 IRQ

    wire               sata_clk    ; // Just output from SATA subsystem SuppressThisWarning VEditor Not used
   
    assign gpio_db = 0;    // unused,  Motors in x353
    assign gpio_db_en = 0; // unused,  Motors in x353
    assign gpio_in= {48'h0,frst,tmp_debug}; // these are PS GPIO pins
670
   
671 672
    assign axird_dev_ready = ~axird_dev_busy; //may combine (AND) multiple sources if needed
    assign axird_dev_busy = 1'b0; // always for now
673
// Use this later    
674
    assign axird_rdata= ({32{status_selected_regen}} & status_rdata[31:0]) |
675 676
                       ({32{readback_selected_regen}} & readback_rdata[31:0]) |
                       ({32{mcntrl_axird_selected_regen}} & mcntrl_axird_rdata[31:0]);
677 678 679
   
//Debug with this (to show 'x)   
//   assign axird_rdata= status_selected_regen?status_rdata[31:0] : (mcntrl_axird_selected_regen? mcntrl_axird_rdata[31:0]:'bx);
680

681 682 683 684 685 686 687 688 689
// temporary for Vivado debugging
//   assign axird_rdata= status_rdata[31:0] |  mcntrl_axird_rdata[31:0];

   
   assign axiwr_dev_ready = ~axiwr_dev_busy; //may combine (AND) multiple sources if needed

// Clock and reset from PS
   assign comb_rst=~frst[0] | frst[1];

690
    // insert register layers if needed
691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714
    always @ (posedge mclk) begin
        cmd_mcontr_ad <=      cmd_root_ad;
        cmd_mcontr_stb <=     cmd_root_stb;
        
        cmd_test01_ad <=      cmd_root_ad;
        cmd_test01_stb <=     cmd_root_stb;
        
        cmd_membridge_ad <=   cmd_root_ad;
        cmd_membridge_stb <=  cmd_root_stb;
        
        cmd_sensor_ad <=      cmd_root_ad;
        cmd_sensor_stb <=     cmd_root_stb;
        
        cmd_compressor_ad <=  cmd_root_ad;
        cmd_compressor_stb <= cmd_root_stb;
        
        cmd_sequencer_ad <=   cmd_root_ad;
        cmd_sequencer_stb <=  cmd_root_stb;
        
        cmd_logger_ad <=      cmd_root_ad;
        cmd_logger_stb <=     cmd_root_stb;
        
        cmd_timing_ad <=      cmd_root_ad;
        cmd_timing_stb <=     cmd_root_stb;
715 716 717

        cmd_gpio_ad <=        cmd_root_ad;
        cmd_gpio_stb <=       cmd_root_stb;
718 719 720 721
        
        cmd_saxi1wr_ad <=     cmd_root_ad;
        cmd_saxi1wr_stb <=    cmd_root_stb;
        
722 723
        cmd_clocks_ad <=      cmd_root_ad;
        cmd_clocks_stb <=     cmd_root_stb;
724 725 726 727 728

`ifdef DEBUG_RING
        cmd_debug_ad <=      cmd_root_ad;
        cmd_debug_stb <=     cmd_root_stb;
`endif        
729
    end
730 731

// For now - connect status_test01 to status_other, if needed - increase number of multiplexer inputs)
732 733 734
//   assign status_other_ad = status_test01_ad;
//   assign status_other_rq = status_test01_rq;
//   assign status_test01_start = status_other_start;
735

736 737 738 739


// delay status_selected and mcntrl_axird_selected to match data for multiplexing

Andrey Filippov's avatar
Andrey Filippov committed
740 741 742 743
//    always @(posedge axi_grst or posedge axird_bram_rclk) begin // axird_bram_rclk==axi_aclk
    always @(posedge axird_bram_rclk) begin // axird_bram_rclk==axi_aclk

        if      (arst)        status_selected_ren <= 1'b0;
744 745
        else if (axird_ren)   status_selected_ren <= status_selected;
        
Andrey Filippov's avatar
Andrey Filippov committed
746
        if      (arst)        status_selected_regen <= 1'b0;
747 748
        else if (axird_regen) status_selected_regen <= status_selected_ren;

Andrey Filippov's avatar
Andrey Filippov committed
749
        if      (arst)        readback_selected_ren <= 1'b0;
750 751
        else if (axird_ren)   readback_selected_ren <= readback_selected;
        
Andrey Filippov's avatar
Andrey Filippov committed
752
        if      (arst)        readback_selected_regen <= 1'b0;
753 754
        else if (axird_regen) readback_selected_regen <= readback_selected_ren;

Andrey Filippov's avatar
Andrey Filippov committed
755
        if      (arst)        mcntrl_axird_selected_ren <= 1'b0;
756 757
        else if (axird_ren)   mcntrl_axird_selected_ren <=  mcntrl_axird_selected;
        
Andrey Filippov's avatar
Andrey Filippov committed
758
        if      (arst)        mcntrl_axird_selected_regen <= 1'b0;
759 760
        else if (axird_regen) mcntrl_axird_selected_regen <= mcntrl_axird_selected_ren;
    end
Andrey Filippov's avatar
Andrey Filippov committed
761

762

763

Andrey Filippov's avatar
Andrey Filippov committed
764
    always @(posedge comb_rst or posedge axi_aclk) begin 
765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799
        if (comb_rst) axi_rst_pre <= 1'b1;
        else          axi_rst_pre <= 1'b0;
    end
     

`ifdef DEBUG_FIFO
        wire    waddr_under, wdata_under, wresp_under; 
        wire    waddr_over, wdata_over, wresp_over;
        reg     waddr_under_r, wdata_under_r, wresp_under_r;
        reg     waddr_over_r, wdata_over_r, wresp_over_r;
        wire    fifo_rst= frst[2];
        wire [3:0]   waddr_wcount; 
        wire [3:0]   waddr_rcount; 
        wire [3:0]   waddr_num_in_fifo; 
        
        wire [3:0]   wdata_wcount; 
        wire [3:0]   wdata_rcount; 
        wire [3:0]   wdata_num_in_fifo; 
        
        wire [3:0]   wresp_wcount; 
        wire [3:0]   wresp_rcount; 
        wire [3:0]   wresp_num_in_fifo; 
        wire [3:0]   wleft;
        wire [3:0]   wlength; // output[3:0] 
        wire [3:0]   wlen_in_dbg; // output[3:0] reg 
        
           
    always @(posedge fifo_rst or posedge axi_aclk) begin
     if (fifo_rst) {waddr_under_r, wdata_under_r, wresp_under_r,waddr_over_r, wdata_over_r, wresp_over_r} <= 0;
     else {waddr_under_r, wdata_under_r, wresp_under_r, waddr_over_r, wdata_over_r, wresp_over_r} <=
          {waddr_under_r, wdata_under_r, wresp_under_r, waddr_over_r, wdata_over_r, wresp_over_r} | 
          {waddr_under,   wdata_under,   wresp_under,   waddr_over,   wdata_over,   wresp_over};
    end         
`endif

800 801 802 803
// Checking if global axi_grst is not needed anymore:
//BUFG bufg_axi_rst_i   (.O(axi_grst),.I(axi_rst_pre)); // will go only to memory controller (to minimize changes), later - remove from there too
assign axi_grst = axi_rst_pre;

804

805 806 807 808 809
// channel test module
    mcntrl393_test01 #(
        .MCNTRL_TEST01_ADDR                 (MCNTRL_TEST01_ADDR),
        .MCNTRL_TEST01_MASK                 (MCNTRL_TEST01_MASK),
        .FRAME_HEIGHT_BITS                  (FRAME_HEIGHT_BITS),
810 811
        .MCNTRL_TEST01_CHN1_MODE            (MCNTRL_TEST01_CHN1_MODE),
        .MCNTRL_TEST01_CHN1_STATUS_CNTRL    (MCNTRL_TEST01_CHN1_STATUS_CNTRL),
812 813 814 815 816 817
        .MCNTRL_TEST01_CHN2_MODE            (MCNTRL_TEST01_CHN2_MODE),
        .MCNTRL_TEST01_CHN2_STATUS_CNTRL    (MCNTRL_TEST01_CHN2_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN3_MODE            (MCNTRL_TEST01_CHN3_MODE),
        .MCNTRL_TEST01_CHN3_STATUS_CNTRL    (MCNTRL_TEST01_CHN3_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN4_MODE            (MCNTRL_TEST01_CHN4_MODE),
        .MCNTRL_TEST01_CHN4_STATUS_CNTRL    (MCNTRL_TEST01_CHN4_STATUS_CNTRL),
818
        .MCNTRL_TEST01_STATUS_REG_CHN1_ADDR (MCNTRL_TEST01_STATUS_REG_CHN1_ADDR),
819 820
        .MCNTRL_TEST01_STATUS_REG_CHN2_ADDR (MCNTRL_TEST01_STATUS_REG_CHN2_ADDR),
        .MCNTRL_TEST01_STATUS_REG_CHN3_ADDR (MCNTRL_TEST01_STATUS_REG_CHN3_ADDR),
821
        .MCNTRL_TEST01_STATUS_REG_CHN4_ADDR (MCNTRL_TEST01_STATUS_REG_CHN4_ADDR)
822
    ) mcntrl393_test01_i (
Andrey Filippov's avatar
Andrey Filippov committed
823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839
        .mrst                 (mrst),                 // input
        .mclk                 (mclk),                 // input
        .cmd_ad               (cmd_test01_ad),        // input[7:0] 
        .cmd_stb              (cmd_test01_stb),       // input
        .status_ad            (status_test01_ad),     // output[7:0] 
        .status_rq            (status_test01_rq),     // output
        .status_start         (status_test01_start),  // input
        .frame_start_chn1     (),                     //frame_start_chn1), // output
        .next_page_chn1       (),                     //next_page_chn1), // output
        .page_ready_chn1      (1'b0),                 // page_ready_chn1), // input
        .frame_done_chn1      (1'b0),                 //frame_done_chn1), // input
        .line_unfinished_chn1 (16'b0),                //line_unfinished_chn1), // input[15:0] 
        .suspend_chn1         (),                     //suspend_chn1), // output
        .frame_start_chn2     (frame_start_chn2),     // output
        .next_page_chn2       (next_page_chn2),       // output
        .page_ready_chn2      (page_ready_chn2),      // input
        .frame_done_chn2      (frame_done_chn2),      // input
840
        .line_unfinished_chn2 (line_unfinished_chn2), // input[15:0] 
Andrey Filippov's avatar
Andrey Filippov committed
841 842 843 844 845
        .suspend_chn2         (suspend_chn2),         // output
        .frame_start_chn3     (frame_start_chn3),     // output
        .next_page_chn3       (next_page_chn3),       // output
        .page_ready_chn3      (page_ready_chn3),      // input
        .frame_done_chn3      (frame_done_chn3),      // input
846
        .line_unfinished_chn3 (line_unfinished_chn3), // input[15:0] 
Andrey Filippov's avatar
Andrey Filippov committed
847 848 849 850 851
        .suspend_chn3         (suspend_chn3),         // output
        .frame_start_chn4     (frame_start_chn4),     // output
        .next_page_chn4       (next_page_chn4),       // output
        .page_ready_chn4      (page_ready_chn4),      // input
        .frame_done_chn4      (frame_done_chn4),      // input
852
        .line_unfinished_chn4 (line_unfinished_chn4), // input[15:0] 
Andrey Filippov's avatar
Andrey Filippov committed
853
        .suspend_chn4         (suspend_chn4)          // output
854 855 856
    );

// Interface to channels to read/write memory (including 4 page BRAM buffers)
857
// TODO:increase depth, number of NUM_CYCLES - twice?
858 859 860 861
    cmd_mux #(
        .AXI_WR_ADDR_BITS  (AXI_WR_ADDR_BITS),
        .CONTROL_ADDR      (CONTROL_ADDR),
        .CONTROL_ADDR_MASK (CONTROL_ADDR_MASK),
862
// TODO: Put correct numcycles!        
863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878
        .NUM_CYCLES_LOW_BIT(NUM_CYCLES_LOW_BIT),
        .NUM_CYCLES_00     (NUM_CYCLES_00),
        .NUM_CYCLES_01     (NUM_CYCLES_01),
        .NUM_CYCLES_02     (NUM_CYCLES_02),
        .NUM_CYCLES_03     (NUM_CYCLES_03),
        .NUM_CYCLES_04     (NUM_CYCLES_04),
        .NUM_CYCLES_05     (NUM_CYCLES_05),
        .NUM_CYCLES_06     (NUM_CYCLES_06),
        .NUM_CYCLES_07     (NUM_CYCLES_07),
        .NUM_CYCLES_08     (NUM_CYCLES_08),
        .NUM_CYCLES_09     (NUM_CYCLES_09),
        .NUM_CYCLES_10     (NUM_CYCLES_10),
        .NUM_CYCLES_11     (NUM_CYCLES_11),
        .NUM_CYCLES_12     (NUM_CYCLES_12),
        .NUM_CYCLES_13     (NUM_CYCLES_13),
        .NUM_CYCLES_14     (NUM_CYCLES_14),
879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895
        .NUM_CYCLES_15     (NUM_CYCLES_15),
        .NUM_CYCLES_16     (NUM_CYCLES_16),
        .NUM_CYCLES_17     (NUM_CYCLES_17),
        .NUM_CYCLES_18     (NUM_CYCLES_18),
        .NUM_CYCLES_19     (NUM_CYCLES_19),
        .NUM_CYCLES_20     (NUM_CYCLES_20),
        .NUM_CYCLES_21     (NUM_CYCLES_21),
        .NUM_CYCLES_22     (NUM_CYCLES_22),
        .NUM_CYCLES_23     (NUM_CYCLES_23),
        .NUM_CYCLES_24     (NUM_CYCLES_24),
        .NUM_CYCLES_25     (NUM_CYCLES_25),
        .NUM_CYCLES_26     (NUM_CYCLES_26),
        .NUM_CYCLES_27     (NUM_CYCLES_27),
        .NUM_CYCLES_28     (NUM_CYCLES_28),
        .NUM_CYCLES_29     (NUM_CYCLES_29),
        .NUM_CYCLES_30     (NUM_CYCLES_30),
        .NUM_CYCLES_31     (NUM_CYCLES_31)
896
    ) cmd_mux_i ( // SuppressThisWarning ISExst: Output port <par_data>,<par_waddr>, <cseq_ackn> of the instance <cmd_mux_i> is unconnected or connected to loadless signal.
Andrey Filippov's avatar
Andrey Filippov committed
897
        .axi_clk      (axiwr_wclk), // input
898
        .mclk         (mclk), // input
Andrey Filippov's avatar
Andrey Filippov committed
899 900
        .mrst         (mrst), // input
        .arst         (arst), // input
901
        .pre_waddr    (axiwr_pre_awaddr[AXI_WR_ADDR_BITS-1:0]), // input[12:0] // SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #cmd_mux_i:pre_waddr[9:0] to constant 0
902
        .start_wburst (axiwr_start_burst), // input
Andrey Filippov's avatar
Andrey Filippov committed
903 904 905
        .waddr        (axiwr_waddr[AXI_WR_ADDR_BITS-1:0]), // input[12:0] 
        .wr_en        (axiwr_wen), // input
        .wdata        (axiwr_wdata[31:0]), // input[31:0] 
906
        .busy         (axiwr_dev_busy), // output // assign axiwr_dev_ready = ~axiwr_dev_busy; //may combine (AND) multiple sources if needed
Andrey Filippov's avatar
Andrey Filippov committed
907
//TODO: The following is the interface to the command sequencer       
908 909 910 911
        .cseq_waddr   (cseq_waddr), // input[12:0] // SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #cmd_mux_i:cseq_waddr[13:0] to constant 0 (command sequencer not yet implemented)
        .cseq_wr_en   (cseq_wr_en), // input // SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #cmd_mux_i:cseq_wr_en to constant 0 (command sequencer not yet implemented)
        .cseq_wdata   (cseq_wdata), // input[31:0] // SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #cmd_mux_i:cseq_wdata[31:0] to constant 0 (command sequencer not yet implemented)
        .cseq_ackn    (cseq_ackn), // output // SuppressThisWarning ISExst: Assignment to cseq_ackn ignored, since the identifier is never used (command sequencer not yet implemented)
912
// parallel address/data - where higher bandwidth (single-cycle) is needed        
913 914
        .par_waddr    (par_waddr), // output[12:0] // SuppressThisWarning ISExst: Assignment to par_waddr ignored, since the identifier is never used (not yet used)
        .par_data     (par_data), // output[31:0] // SuppressThisWarning ISExst: Assignment to par_data ignored, since the identifier is never used (not yet used)
915
        // registers may be inserted before byte_ad and ad_stb  
916 917
        .byte_ad      (cmd_root_ad), // output[7:0] 
        .ad_stb       (cmd_root_stb) // output
918
    );
919 920 921 922 923 924 925 926 927 928 929 930 931

    generate
        genvar i;
            for (i = 0; i < 4; i = i+1) begin: frame_sequencer_block
            cmd_frame_sequencer #(
                .CMDFRAMESEQ_ADDR     (CMDFRAMESEQ_ADDR_BASE + i * CMDFRAMESEQ_ADDR_INC),
                .CMDFRAMESEQ_MASK     (CMDFRAMESEQ_MASK),
                .AXI_WR_ADDR_BITS     (AXI_WR_ADDR_BITS),
                .CMDFRAMESEQ_DEPTH    (CMDFRAMESEQ_DEPTH),
                .CMDFRAMESEQ_ABS      (CMDFRAMESEQ_ABS),
                .CMDFRAMESEQ_REL      (CMDFRAMESEQ_REL),
                .CMDFRAMESEQ_CTRL     (CMDFRAMESEQ_CTRL),
                .CMDFRAMESEQ_RST_BIT  (CMDFRAMESEQ_RST_BIT),
932 933
                .CMDFRAMESEQ_RUN_BIT  (CMDFRAMESEQ_RUN_BIT),
                .CMDFRAMESEQ_IRQ_BIT  (CMDFRAMESEQ_IRQ_BIT)
934
            ) cmd_frame_sequencer_i (
Andrey Filippov's avatar
Andrey Filippov committed
935
                .mrst        (mrst),                       // input
936 937 938 939 940 941 942 943
                .mclk        (mclk),                       // input
                .cmd_ad      (cmd_sequencer_ad),           // input[7:0] 
                .cmd_stb     (cmd_sequencer_stb),          // input
                .frame_sync  (sof_out_mclk[i]),            // input
                .frame_no    (frame_num[i * NUM_FRAME_BITS +: NUM_FRAME_BITS]), // output[3:0] 
                .waddr       (frseq_waddr[i * AXI_WR_ADDR_BITS +: AXI_WR_ADDR_BITS]), // output[13:0] 
                .valid       (frseq_valid[i]),             // output
                .wdata       (frseq_wdata[i * 32 +: 32]),  // output[31:0] 
944 945 946 947
                .ackn        (frseq_ackn[i]),              // input
                .is          (frseq_is[i]),                // output
                .im          (frseq_im[i])                 // output
                
948 949 950 951
            );
        end
    endgenerate

952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967
    frame_num_sync #(
        .NUM_FRAME_BITS(NUM_FRAME_BITS),
        .LAST_FRAME_BITS(LAST_FRAME_BITS),
        .FRAME_BITS_KEEP(NUM_FRAME_BITS)
    ) frame_num_sync_i (
        .mrst                     (mrst),                        // input
        .mclk                     (mclk),                        // input
        .absolute_frames          (frame_num),                   // input[15:0] 
        .first_wr_in_frame        (sens_first_wr_in_frame),      // input[3:0] 
//        .first_rd_in_frame        (), // input[3:0] 
        .memory_frames_sensor     (cmprs_frame_number_src),      // input[63:0] 
        .memory_frames_compressor (cmprs_frame_number_finished), // input[63:0] 
        .compressed_frames        (frame_num_compressed)         // output[15:0] 
    );


968
    cmd_seq_mux #(
969 970 971 972
        .CMDSEQMUX_ADDR      (CMDSEQMUX_ADDR),
        .CMDSEQMUX_MASK      (CMDSEQMUX_MASK),
        .CMDSEQMUX_STATUS    (CMDSEQMUX_STATUS),
        .AXI_WR_ADDR_BITS    (AXI_WR_ADDR_BITS)
973
    ) cmd_seq_mux_i (
Andrey Filippov's avatar
Andrey Filippov committed
974
        .mrst         (mrst),                               // input
975 976 977 978 979 980 981 982 983 984 985 986
        .mclk         (mclk),                               // input
        .cmd_ad       (cmd_sequencer_ad),                   // input[7:0] 
        .cmd_stb      (cmd_sequencer_stb),                  // input
        .status_ad    (status_sequencer_ad),                // output[7:0] 
        .status_rq    (status_sequencer_rq),                // output
        .status_start (status_sequencer_start),             // input
        
        .frame_num0   (frame_num[0 * NUM_FRAME_BITS +: 4]), // input[3:0] Use 4 bits even if NUM_FRAME_BITS > 4
        .waddr0       (frseq_waddr[0 * AXI_WR_ADDR_BITS +: AXI_WR_ADDR_BITS]), // input[13:0] 
        .wr_en0       (frseq_valid[0]),                     // input
        .wdata0       (frseq_wdata[0 * 32 +: 32]),          // input[31:0] 
        .ackn0        (frseq_ackn[0]),                      // output
987 988
        .is0          (frseq_is[0]),                        // input
        .im0          (frseq_im[0]),                        // input
989 990 991 992 993 994
        
        .frame_num1   (frame_num[1 * NUM_FRAME_BITS +: 4]), // input[3:0] Use 4 bits even if NUM_FRAME_BITS > 4
        .waddr1       (frseq_waddr[1 * AXI_WR_ADDR_BITS +: AXI_WR_ADDR_BITS]), // input[13:0] 
        .wr_en1       (frseq_valid[1]),                     // input
        .wdata1       (frseq_wdata[1 * 32 +: 32]),          // input[31:0] 
        .ackn1        (frseq_ackn[1]),                      // output
995 996
        .is1          (frseq_is[1]),                        // input
        .im1          (frseq_im[1]),                        // input
997 998 999 1000 1001 1002
        
        .frame_num2   (frame_num[2 * NUM_FRAME_BITS +: 4]), // input[3:0] Use 4 bits even if NUM_FRAME_BITS > 4
        .waddr2       (frseq_waddr[2 * AXI_WR_ADDR_BITS +: AXI_WR_ADDR_BITS]), // input[13:0] 
        .wr_en2       (frseq_valid[2]),                     // input
        .wdata2       (frseq_wdata[2 * 32 +: 32]),          // input[31:0] 
        .ackn2        (frseq_ackn[2]),                      // output
1003 1004
        .is2          (frseq_is[2]),                        // input
        .im2          (frseq_im[2]),                        // input
1005 1006 1007 1008 1009 1010
        
        .frame_num3   (frame_num[3 * NUM_FRAME_BITS +: 4]), // input[3:0] Use 4 bits even if NUM_FRAME_BITS > 4
        .waddr3       (frseq_waddr[3 * AXI_WR_ADDR_BITS +: AXI_WR_ADDR_BITS]), // input[13:0] 
        .wr_en3       (frseq_valid[3]),                     // input
        .wdata3       (frseq_wdata[3 * 32 +: 32]),          // input[31:0] 
        .ackn3        (frseq_ackn[3]),                      // output
1011 1012 1013
        .is3          (frseq_is[3]),                        // input
        .im3          (frseq_im[3]),                        // input

1014 1015 1016 1017
        .waddr_out    (cseq_waddr),                         // output[13:0] reg 
        .wr_en_out    (cseq_wr_en),                         // output
        .wdata_out    (cseq_wdata),                         // output[31:0] reg 
        .ackn_out     (cseq_ackn)                           // input
1018
    );
1019

1020 1021 1022 1023 1024 1025 1026 1027 1028 1029
    // Mirror control register data for readback (registers can be written both from the PS and from the command sequencer)
    cmd_readback #(
        .AXI_WR_ADDR_BITS        (AXI_WR_ADDR_BITS),
        .AXI_RD_ADDR_BITS        (AXI_RD_ADDR_BITS),
        .CONTROL_RBACK_DEPTH     (CONTROL_RBACK_DEPTH),
        .CONTROL_ADDR            (CONTROL_ADDR),
        .CONTROL_ADDR_MASK       (CONTROL_ADDR_MASK),
        .CONTROL_RBACK_ADDR      (CONTROL_RBACK_ADDR),
        .CONTROL_RBACK_ADDR_MASK (CONTROL_RBACK_ADDR_MASK)
    ) cmd_readback_i (
Andrey Filippov's avatar
Andrey Filippov committed
1030 1031 1032 1033 1034 1035 1036 1037 1038
        .mrst                    (mrst),                                 // input
        .arst                    (arst),                                 // input
        .mclk                    (mclk),                                 // input
        .axi_clk                 (axird_bram_rclk),                      // input
        .par_waddr               (par_waddr),                            // input[13:0] 
        .par_data                (par_data),                             // input[31:0] 
        .ad_stb                  (cmd_root_stb),                         // input
        .axird_pre_araddr        (axird_pre_araddr),                     // input[13:0] 
        .axird_start_burst       (axird_start_burst),                    // input
1039
        .axird_raddr             (axird_raddr[CONTROL_RBACK_DEPTH-1:0]), // input[9:0] 
Andrey Filippov's avatar
Andrey Filippov committed
1040 1041 1042
        .axird_ren               (axird_ren),                            // input
        .axird_rdata             (readback_rdata),                       // output[31:0] 
        .axird_selected          (readback_selected)                     // output
1043
    );
1044

1045
    status_read #(
1046 1047 1048
        .STATUS_ADDR      (STATUS_ADDR),
        .STATUS_ADDR_MASK (STATUS_ADDR_MASK),
        .AXI_RD_ADDR_BITS (AXI_RD_ADDR_BITS),
1049 1050
        .STATUS_DEPTH     (STATUS_DEPTH),
        .FPGA_VERSION     (FPGA_VERSION)
1051
    ) status_read_i (
Andrey Filippov's avatar
Andrey Filippov committed
1052 1053 1054 1055 1056 1057
        .mrst             (mrst),                          // input
        .arst             (arst),                          // input
        .clk              (mclk),                          // input
        .axi_clk          (axird_bram_rclk),               // input == axi_aclk
        .axird_pre_araddr (axird_pre_araddr),              // input[7:0] // SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #status_read_i:axird_pre_araddr[9:0] to constant 0
        .axird_start_burst(axird_start_burst),             // input
1058
        .axird_raddr      (axird_raddr[STATUS_DEPTH-1:0]), // input[7:0] 
Andrey Filippov's avatar
Andrey Filippov committed
1059 1060 1061 1062 1063 1064 1065
        .axird_ren        (axird_ren),                     // input
        .axird_regen      (axird_regen),                   // input
        .axird_rdata      (status_rdata),                  // output[31:0] 
        .axird_selected   (status_selected),               // output
        .ad               (status_root_ad),                // input[7:0] 
        .rq               (status_root_rq),                // input
        .start            (status_root_start)              // output
1066 1067 1068
    );

// mux status info from the memory controller and other modules    
1069
    status_router16 status_router16_top_i (
Andrey Filippov's avatar
Andrey Filippov committed
1070 1071 1072 1073 1074 1075
        .rst       (1'b0),                    //axi_rst), // input
        .clk       (mclk),                    // input
        .srst      (mrst),                    // input
        .db_in0    (status_mcontr_ad),        // input[7:0] 
        .rq_in0    (status_mcontr_rq),        // input
        .start_in0 (status_mcontr_start),     // output
1076
        
Andrey Filippov's avatar
Andrey Filippov committed
1077 1078 1079
        .db_in1    (status_test01_ad),        // input[7:0] 
        .rq_in1    (status_test01_rq),        // input
        .start_in1 (status_test01_start),     // output
1080
        
Andrey Filippov's avatar
Andrey Filippov committed
1081 1082 1083
        .db_in2    (status_membridge_ad),     // input[7:0] 
        .rq_in2    (status_membridge_rq),     // input
        .start_in2 (status_membridge_start),  // output
1084

Andrey Filippov's avatar
Andrey Filippov committed
1085 1086 1087
        .db_in3    (status_sensor_ad),        // input[7:0] 
        .rq_in3    (status_sensor_rq),        // input
        .start_in3 (status_sensor_start),     // output
1088
        
Andrey Filippov's avatar
Andrey Filippov committed
1089 1090
        .db_in4    (status_compressor_ad),    // input[7:0] 
        .rq_in4    (status_compressor_rq),    // input
1091 1092
        .start_in4 (status_compressor_start), // output
        
Andrey Filippov's avatar
Andrey Filippov committed
1093 1094 1095
        .db_in5    (status_sequencer_ad),     // input[7:0] 
        .rq_in5    (status_sequencer_rq),     // input
        .start_in5 (status_sequencer_start),  // output
1096
        
Andrey Filippov's avatar
Andrey Filippov committed
1097 1098 1099
        .db_in6    (status_logger_ad),        // input[7:0] 
        .rq_in6    (status_logger_rq),        // input
        .start_in6 (status_logger_start),     // output
1100
        
1101
        .db_in7    (status_timing_ad),        // input[7:0] 
Andrey Filippov's avatar
Andrey Filippov committed
1102 1103
        .rq_in7    (status_timing_rq),        // input
        .start_in7 (status_timing_start),     // output
1104
        
Andrey Filippov's avatar
Andrey Filippov committed
1105 1106 1107
        .db_in8    (status_gpio_ad),          // input[7:0] 
        .rq_in8    (status_gpio_rq),          // input
        .start_in8 (status_gpio_start),       // output
1108
        
Andrey Filippov's avatar
Andrey Filippov committed
1109 1110 1111
        .db_in9    (status_saxi1wr_ad),       // input[7:0] 
        .rq_in9    (status_saxi1wr_rq),       // input
        .start_in9 (status_saxi1wr_start),    // output
1112
        
Andrey Filippov's avatar
Andrey Filippov committed
1113 1114 1115
        .db_in10   (status_clocks_ad),        // input[7:0] 
        .rq_in10   (status_clocks_rq),        // input
        .start_in10(status_clocks_start),     // output
1116
`ifdef DEBUG_RING
1117 1118 1119
        .db_in11   (status_debug_ad),         // input[7:0] 
        .rq_in11   (status_debug_rq),         // input
        .start_in11(status_debug_start),      // output
1120 1121 1122 1123 1124
`else
        .db_in11   (8'b0),                    // input[7:0] 
        .rq_in11   (1'b0),                    // input
        .start_in11(),                        // output
`endif        
Andrey Filippov's avatar
Andrey Filippov committed
1125 1126 1127
        .db_in12   (8'b0),                    // input[7:0] 
        .rq_in12   (1'b0),                    // input
        .start_in12(),                        // output
1128
        
Andrey Filippov's avatar
Andrey Filippov committed
1129 1130 1131
        .db_in13   (8'b0),                    // input[7:0] 
        .rq_in13   (1'b0),                    // input
        .start_in13(),                        // output
1132
        
Andrey Filippov's avatar
Andrey Filippov committed
1133 1134 1135
        .db_in14   (8'b0),                    // input[7:0] 
        .rq_in14   (1'b0),                    // input
        .start_in14(),                        // output
1136
        
Andrey Filippov's avatar
Andrey Filippov committed
1137 1138 1139
        .db_in15   (8'b0),                    // input[7:0] 
        .rq_in15   (1'b0),                    // input
        .start_in15(),                        // output
1140

Andrey Filippov's avatar
Andrey Filippov committed
1141 1142 1143
        .db_out    (status_root_ad),          // output[7:0] 
        .rq_out    (status_root_rq),          // output
        .start_out (status_root_start)        // input
1144
    );
1145

Andrey Filippov's avatar
Andrey Filippov committed
1146
    mcntrl393 #(
Andrey Filippov's avatar
Andrey Filippov committed
1147
        .CMPRS_CHN_MASK                    (CMPRS_CHN_MASK),
1148 1149 1150 1151 1152 1153 1154 1155
        .MCONTR_SENS_BASE                  (MCONTR_SENS_BASE),
        .MCONTR_SENS_INC                   (MCONTR_SENS_INC),
        .MCONTR_CMPRS_BASE                 (MCONTR_CMPRS_BASE),
        .MCONTR_CMPRS_INC                  (MCONTR_CMPRS_INC),
        .MCONTR_SENS_STATUS_BASE           (MCONTR_SENS_STATUS_BASE),
        .MCONTR_SENS_STATUS_INC            (MCONTR_SENS_STATUS_INC),
        .MCONTR_CMPRS_STATUS_BASE          (MCONTR_CMPRS_STATUS_BASE),
        .MCONTR_CMPRS_STATUS_INC           (MCONTR_CMPRS_STATUS_INC),
1156
    
Andrey Filippov's avatar
Andrey Filippov committed
1157 1158 1159 1160
        .MCONTR_WR_MASK                    (MCONTR_WR_MASK),
        .MCONTR_RD_MASK                    (MCONTR_RD_MASK),
        .MCONTR_CMD_WR_ADDR                (MCONTR_CMD_WR_ADDR),
        .MCONTR_BUF0_RD_ADDR               (MCONTR_BUF0_RD_ADDR),
1161
        .MCONTR_BUF0_WR_ADDR               (MCONTR_BUF0_WR_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
1162
        .MCONTR_BUF2_RD_ADDR               (MCONTR_BUF2_RD_ADDR),
1163 1164
        .MCONTR_BUF2_WR_ADDR               (MCONTR_BUF2_WR_ADDR),
        .MCONTR_BUF3_RD_ADDR               (MCONTR_BUF3_RD_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
1165 1166
        .MCONTR_BUF3_WR_ADDR               (MCONTR_BUF3_WR_ADDR),
        .MCONTR_BUF4_RD_ADDR               (MCONTR_BUF4_RD_ADDR),
1167
        .MCONTR_BUF4_WR_ADDR               (MCONTR_BUF4_WR_ADDR),
1168 1169
        .AXI_WR_ADDR_BITS                  (AXI_WR_ADDR_BITS),
        .AXI_RD_ADDR_BITS                  (AXI_RD_ADDR_BITS),
1170
       
Andrey Filippov's avatar
Andrey Filippov committed
1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226
        .DLY_LD                            (DLY_LD),
        .DLY_LD_MASK                       (DLY_LD_MASK),
        .MCONTR_PHY_0BIT_ADDR              (MCONTR_PHY_0BIT_ADDR),
        .MCONTR_PHY_0BIT_ADDR_MASK         (MCONTR_PHY_0BIT_ADDR_MASK),
        .MCONTR_PHY_0BIT_DLY_SET           (MCONTR_PHY_0BIT_DLY_SET),
        .MCONTR_PHY_0BIT_CMDA_EN           (MCONTR_PHY_0BIT_CMDA_EN),
        .MCONTR_PHY_0BIT_SDRST_ACT         (MCONTR_PHY_0BIT_SDRST_ACT),
        .MCONTR_PHY_0BIT_CKE_EN            (MCONTR_PHY_0BIT_CKE_EN),
        .MCONTR_PHY_0BIT_DCI_RST           (MCONTR_PHY_0BIT_DCI_RST),
        .MCONTR_PHY_0BIT_DLY_RST           (MCONTR_PHY_0BIT_DLY_RST),
        .MCONTR_TOP_0BIT_ADDR              (MCONTR_TOP_0BIT_ADDR),
        .MCONTR_TOP_0BIT_ADDR_MASK         (MCONTR_TOP_0BIT_ADDR_MASK),
        .MCONTR_TOP_0BIT_MCONTR_EN         (MCONTR_TOP_0BIT_MCONTR_EN),
        .MCONTR_TOP_0BIT_REFRESH_EN        (MCONTR_TOP_0BIT_REFRESH_EN),
        .MCONTR_PHY_16BIT_ADDR             (MCONTR_PHY_16BIT_ADDR),
        .MCONTR_PHY_16BIT_ADDR_MASK        (MCONTR_PHY_16BIT_ADDR_MASK),
        .MCONTR_PHY_16BIT_PATTERNS         (MCONTR_PHY_16BIT_PATTERNS),
        .MCONTR_PHY_16BIT_PATTERNS_TRI     (MCONTR_PHY_16BIT_PATTERNS_TRI),
        .MCONTR_PHY_16BIT_WBUF_DELAY       (MCONTR_PHY_16BIT_WBUF_DELAY),
        .MCONTR_PHY_16BIT_EXTRA            (MCONTR_PHY_16BIT_EXTRA),
        .MCONTR_PHY_STATUS_CNTRL           (MCONTR_PHY_STATUS_CNTRL),
        .MCONTR_ARBIT_ADDR                 (MCONTR_ARBIT_ADDR),
        .MCONTR_ARBIT_ADDR_MASK            (MCONTR_ARBIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_ADDR             (MCONTR_TOP_16BIT_ADDR),
        .MCONTR_TOP_16BIT_ADDR_MASK        (MCONTR_TOP_16BIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_CHN_EN           (MCONTR_TOP_16BIT_CHN_EN),
        .MCONTR_TOP_16BIT_REFRESH_PERIOD   (MCONTR_TOP_16BIT_REFRESH_PERIOD),
        .MCONTR_TOP_16BIT_REFRESH_ADDRESS  (MCONTR_TOP_16BIT_REFRESH_ADDRESS),
        .MCONTR_TOP_16BIT_STATUS_CNTRL     (MCONTR_TOP_16BIT_STATUS_CNTRL),
        .MCONTR_PHY_STATUS_REG_ADDR        (MCONTR_PHY_STATUS_REG_ADDR),
        .MCONTR_TOP_STATUS_REG_ADDR        (MCONTR_TOP_STATUS_REG_ADDR),
        .CHNBUF_READ_LATENCY               (CHNBUF_READ_LATENCY),
        .DFLT_DQS_PATTERN                  (DFLT_DQS_PATTERN),
        .DFLT_DQM_PATTERN                  (DFLT_DQM_PATTERN),
        .DFLT_DQ_TRI_ON_PATTERN            (DFLT_DQ_TRI_ON_PATTERN),
        .DFLT_DQ_TRI_OFF_PATTERN           (DFLT_DQ_TRI_OFF_PATTERN),
        .DFLT_DQS_TRI_ON_PATTERN           (DFLT_DQS_TRI_ON_PATTERN),
        .DFLT_DQS_TRI_OFF_PATTERN          (DFLT_DQS_TRI_OFF_PATTERN),
        .DFLT_WBUF_DELAY                   (DFLT_WBUF_DELAY),
        .DFLT_INV_CLK_DIV                  (DFLT_INV_CLK_DIV),
        .DFLT_CHN_EN                       (DFLT_CHN_EN),
        .DFLT_REFRESH_ADDR                 (DFLT_REFRESH_ADDR),
        .DFLT_REFRESH_PERIOD               (DFLT_REFRESH_PERIOD),
        .ADDRESS_NUMBER                    (ADDRESS_NUMBER),
        .COLADDR_NUMBER                    (COLADDR_NUMBER),
        .PHASE_WIDTH                       (PHASE_WIDTH),
        .SLEW_DQ                           (SLEW_DQ),
        .SLEW_DQS                          (SLEW_DQS),
        .SLEW_CMDA                         (SLEW_CMDA),
        .SLEW_CLK                          (SLEW_CLK),
        .IBUF_LOW_PWR                      (IBUF_LOW_PWR),
        .REFCLK_FREQUENCY                  (REFCLK_FREQUENCY),
        .HIGH_PERFORMANCE_MODE             (HIGH_PERFORMANCE_MODE),
        .CLKIN_PERIOD                      (CLKIN_PERIOD),
        .CLKFBOUT_MULT                     (CLKFBOUT_MULT),
        .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
1227
        .CLKFBOUT_USE_FINE_PS              (CLKFBOUT_USE_FINE_PS),
Andrey Filippov's avatar
Andrey Filippov committed
1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247
        .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
        .SDCLK_PHASE                       (SDCLK_PHASE),
        .CLK_PHASE                         (CLK_PHASE),
        .CLK_DIV_PHASE                     (CLK_DIV_PHASE),
        .MCLK_PHASE                        (MCLK_PHASE),
        .REF_JITTER1                       (REF_JITTER1),
        .SS_EN                             (SS_EN),
        .SS_MODE                           (SS_MODE),
        .SS_MOD_PERIOD                     (SS_MOD_PERIOD),
        .CMD_PAUSE_BITS                    (CMD_PAUSE_BITS),
        .CMD_DONE_BIT                      (CMD_DONE_BIT),
        .MCNTRL_PS_ADDR                    (MCNTRL_PS_ADDR),
        .MCNTRL_PS_MASK                    (MCNTRL_PS_MASK),
        .MCNTRL_PS_STATUS_REG_ADDR         (MCNTRL_PS_STATUS_REG_ADDR),
        .MCNTRL_PS_EN_RST                  (MCNTRL_PS_EN_RST),
        .MCNTRL_PS_CMD                     (MCNTRL_PS_CMD),
        .MCNTRL_PS_STATUS_CNTRL            (MCNTRL_PS_STATUS_CNTRL),
        .NUM_XFER_BITS                     (NUM_XFER_BITS),
        .FRAME_WIDTH_BITS                  (FRAME_WIDTH_BITS),
        .FRAME_HEIGHT_BITS                 (FRAME_HEIGHT_BITS),
1248
        .LAST_FRAME_BITS                   (LAST_FRAME_BITS),
1249
        .MCNTRL_SCANLINE_CHN1_ADDR         (MCNTRL_SCANLINE_CHN1_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
1250 1251 1252 1253 1254
        .MCNTRL_SCANLINE_CHN3_ADDR         (MCNTRL_SCANLINE_CHN3_ADDR),
        .MCNTRL_SCANLINE_MASK              (MCNTRL_SCANLINE_MASK),
        .MCNTRL_SCANLINE_MODE              (MCNTRL_SCANLINE_MODE),
        .MCNTRL_SCANLINE_STATUS_CNTRL      (MCNTRL_SCANLINE_STATUS_CNTRL),
        .MCNTRL_SCANLINE_STARTADDR         (MCNTRL_SCANLINE_STARTADDR),
1255 1256
        .MCNTRL_SCANLINE_FRAME_SIZE        (MCNTRL_SCANLINE_FRAME_SIZE),
        .MCNTRL_SCANLINE_FRAME_LAST        (MCNTRL_SCANLINE_FRAME_LAST),
Andrey Filippov's avatar
Andrey Filippov committed
1257 1258 1259 1260
        .MCNTRL_SCANLINE_FRAME_FULL_WIDTH  (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
        .MCNTRL_SCANLINE_WINDOW_WH         (MCNTRL_SCANLINE_WINDOW_WH),
        .MCNTRL_SCANLINE_WINDOW_X0Y0       (MCNTRL_SCANLINE_WINDOW_X0Y0),
        .MCNTRL_SCANLINE_WINDOW_STARTXY    (MCNTRL_SCANLINE_WINDOW_STARTXY),
1261
        .MCNTRL_SCANLINE_START_DELAY       (MCNTRL_SCANLINE_START_DELAY),
1262
        .MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR),
1263
        .MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
1264
        .MCNTRL_SCANLINE_PENDING_CNTR_BITS (MCNTRL_SCANLINE_PENDING_CNTR_BITS),
1265
        .MCNTRL_SCANLINE_FRAME_PAGE_RESET  (MCNTRL_SCANLINE_FRAME_PAGE_RESET),
Andrey Filippov's avatar
Andrey Filippov committed
1266 1267
        .MAX_TILE_WIDTH                    (MAX_TILE_WIDTH),
        .MAX_TILE_HEIGHT                   (MAX_TILE_HEIGHT),
1268
        .MCNTRL_TILED_CHN2_ADDR            (MCNTRL_TILED_CHN2_ADDR),
1269
        .MCNTRL_TILED_CHN4_ADDR            (MCNTRL_TILED_CHN4_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
1270
        
Andrey Filippov's avatar
Andrey Filippov committed
1271 1272 1273 1274
        .MCNTRL_TILED_MASK                 (MCNTRL_TILED_MASK),
        .MCNTRL_TILED_MODE                 (MCNTRL_TILED_MODE),
        .MCNTRL_TILED_STATUS_CNTRL         (MCNTRL_TILED_STATUS_CNTRL),
        .MCNTRL_TILED_STARTADDR            (MCNTRL_TILED_STARTADDR),
1275 1276
        .MCNTRL_TILED_FRAME_SIZE           (MCNTRL_TILED_FRAME_SIZE),
        .MCNTRL_TILED_FRAME_LAST           (MCNTRL_TILED_FRAME_LAST),
Andrey Filippov's avatar
Andrey Filippov committed
1277 1278 1279 1280
        .MCNTRL_TILED_FRAME_FULL_WIDTH     (MCNTRL_TILED_FRAME_FULL_WIDTH),
        .MCNTRL_TILED_WINDOW_WH            (MCNTRL_TILED_WINDOW_WH),
        .MCNTRL_TILED_WINDOW_X0Y0          (MCNTRL_TILED_WINDOW_X0Y0),
        .MCNTRL_TILED_WINDOW_STARTXY       (MCNTRL_TILED_WINDOW_STARTXY),
1281
        .MCNTRL_TILED_TILE_WHS             (MCNTRL_TILED_TILE_WHS),
1282
        .MCNTRL_TILED_STATUS_REG_CHN2_ADDR (MCNTRL_TILED_STATUS_REG_CHN2_ADDR),
1283
        .MCNTRL_TILED_STATUS_REG_CHN4_ADDR (MCNTRL_TILED_STATUS_REG_CHN4_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
1284
        .MCNTRL_TILED_PENDING_CNTR_BITS    (MCNTRL_TILED_PENDING_CNTR_BITS),
1285
        .MCNTRL_TILED_FRAME_PAGE_RESET     (MCNTRL_TILED_FRAME_PAGE_RESET),
1286 1287 1288 1289 1290 1291 1292 1293 1294 1295
        .MCONTR_LINTILE_NRESET             (MCONTR_LINTILE_NRESET),
        .MCONTR_LINTILE_EN                 (MCONTR_LINTILE_EN),
        .MCONTR_LINTILE_WRITE              (MCONTR_LINTILE_WRITE),
        .MCONTR_LINTILE_EXTRAPG            (MCONTR_LINTILE_EXTRAPG),
        .MCONTR_LINTILE_EXTRAPG_BITS       (MCONTR_LINTILE_EXTRAPG_BITS),
        .MCONTR_LINTILE_KEEP_OPEN          (MCONTR_LINTILE_KEEP_OPEN),
        .MCONTR_LINTILE_BYTE32             (MCONTR_LINTILE_BYTE32),
        .MCONTR_LINTILE_RST_FRAME          (MCONTR_LINTILE_RST_FRAME),
        .MCONTR_LINTILE_SINGLE             (MCONTR_LINTILE_SINGLE),
        .MCONTR_LINTILE_REPEAT             (MCONTR_LINTILE_REPEAT),
1296
        .MCONTR_LINTILE_DIS_NEED           (MCONTR_LINTILE_DIS_NEED),
1297
        .MCONTR_LINTILE_SKIP_LATE          (MCONTR_LINTILE_SKIP_LATE),
1298 1299
        .MCNTRL_SCANLINE_DLY_WIDTH         (MCNTRL_SCANLINE_DLY_WIDTH),
        .MCNTRL_SCANLINE_DLY_DEFAULT       (MCNTRL_SCANLINE_DLY_DEFAULT),
1300 1301 1302
        .BUFFER_DEPTH32                    (BUFFER_DEPTH32),
        .RSEL                              (RSEL),
        .WSEL                              (WSEL)
Andrey Filippov's avatar
Andrey Filippov committed
1303
    ) mcntrl393_i (
Andrey Filippov's avatar
Andrey Filippov committed
1304
        .rst_in                    (axi_grst), // input global reset, but does not need to be global
1305 1306
        .clk_in                    (axi_aclk), // == axird_bram_rclk SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #mcntrl393_i:clk_in to constant 0
        .mclk                      (mclk), // output
Andrey Filippov's avatar
Andrey Filippov committed
1307 1308
        .mrst                      (mrst),
        .locked                    (mcntrl_locked), // to generate sync reset
1309
        .ref_clk                   (ref_clk), // input
Andrey Filippov's avatar
Andrey Filippov committed
1310 1311
        .idelay_ctrl_reset         (idelay_ctrl_reset), // output
        
1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323
        .cmd_ad                    (cmd_mcontr_ad), // input[7:0] 
        .cmd_stb                   (cmd_mcontr_stb), // input
        .status_ad                 (status_mcontr_ad[7:0]), // output[7:0]
        .status_rq                 (status_mcontr_rq),   // input request to send status downstream
        .status_start              (status_mcontr_start), // Acknowledge of the first status packet byte (address)
        
        .axi_clk                   (axird_bram_rclk), // ==axi_aclk, // input - same?
        .axiwr_pre_awaddr          (axiwr_pre_awaddr), // input[12:0] // SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #mcntrl393_i:axiwr_pre_awaddr[9:0] to constant 0
        .axiwr_start_burst         (axiwr_start_burst), // input
        .axiwr_waddr               (axiwr_waddr[BUFFER_DEPTH32-1:0]), // input[9:0] 
        .axiwr_wen                 (axiwr_wen), // input
        .axiwr_data                (axiwr_wdata), // input[31:0] 
1324
        
1325 1326 1327 1328 1329 1330 1331 1332 1333
        .axird_pre_araddr          (axird_pre_araddr), // input[12:0] // SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #mcntrl393_i:axird_pre_araddr[9:0] to constant 0 (seems to be unused, not undriven) 
        .axird_start_burst         (axird_start_burst), // input
        .axird_raddr               (axird_raddr[BUFFER_DEPTH32-1:0]), // input[9:0] 
        .axird_ren                 (axird_ren), // input
        .axird_regen               (axird_regen), // input
        .axird_rdata               (mcntrl_axird_rdata), // output[31:0]
        .axird_selected            (mcntrl_axird_selected), // output 

// sensors interface
1334
        .sens_sof                  (sof_out_mclk),               // input[3:0]  // Early start of frame pulses (@mclk)
1335
        .sens_frame_run            (sens_frame_run),             // output[3:0] @mclk - enable data to memory buffer
1336 1337 1338 1339
        .sens_rpage_set            (sens_rpage_set),             // output[3:0] 
        .sens_rpage_next           (sens_rpage_next),            // output[3:0] 
        .sens_buf_rd               (sens_buf_rd),                // output[3:0] 
        .sens_buf_dout             (sens_buf_dout),              // input[255:0] 
1340
        .sens_page_written         (sens_page_written),          // input [3:0] single mclk pulse: buffer page (full or partial) is written to the memory buffer 
1341
        .sens_xfer_skipped         (sens_xfer_skipped),          // output reg
1342
        .sens_first_wr_in_frame    (sens_first_wr_in_frame),     // single mclk pulse on first write block in each frame
1343 1344 1345 1346
`ifdef DEBUG_SENS_MEM_PAGES
        .dbg_rpage                 (dbg_rpage[7:0]),             // input[7:0]   
        .dbg_wpage                 (dbg_wpage[7:0]),             // input[7:0]   
`endif              
1347
        
1348 1349 1350 1351 1352 1353 1354
// compressor interface
        .cmprs_xfer_reset_page_rd  (cmprs_xfer_reset_page_rd),   // output[3:0] 
        .cmprs_buf_wpage_nxt       (cmprs_buf_wpage_nxt),        // output[3:0] 
        .cmprs_buf_we              (cmprs_buf_we),               // output[3:0] 
        .cmprs_buf_din             (cmprs_buf_din),              // output[255:0] 
        .cmprs_page_ready          (cmprs_page_ready),           // output[3:0] 
        .cmprs_next_page           (cmprs_next_page),            // input[3:0] 
Andrey Filippov's avatar
Andrey Filippov committed
1355
        .cmprs_first_rd_in_frame   (),                           // output[3:0] reg 
1356 1357
        .cmprs_frame_start_dst     (cmprs_frame_start_dst),      // input[3:0]
        .cmprs_frame_start_conf    (cmprs_frame_start_conf),     // output[3:0] 
1358 1359 1360 1361
        .cmprs_line_unfinished_src (cmprs_line_unfinished_src),  // output[63:0] 
        .cmprs_frame_number_src    (cmprs_frame_number_src),     // output[63:0] 
        .cmprs_frame_done_src      (cmprs_frame_done_src),       // output[3:0] 
        .cmprs_line_unfinished_dst (cmprs_line_unfinished_dst),  // output[63:0] 
1362 1363 1364
        .cmprs_frame_number_dst    (cmprs_frame_number_dst),     // output[63:0]
        .cmprs_frames_in_sync      (cmprs_frames_in_sync),       // output[3:0] 
      
1365 1366
        .cmprs_frame_done_dst      (cmprs_frame_done_dst),       // output[3:0] 
        .cmprs_suspend             (cmprs_suspend),              // input[3:0] 
1367
//        .master_follow             (cmprs_master_follow),        // input[3:0] 
1368
        
1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383
 // Originally implemented channels, some are just for testing and may be replaced        
        .frame_start_chn1          (frame_start_chn1),           // input
        .next_page_chn1            (next_page_chn1),             // input
        .cmd_wrmem_chn1            (cmd_wrmem_chn1),             // output
        .page_ready_chn1           (page_ready_chn1),            // output
        .frame_done_chn1           (frame_done_chn1),            // output
        .line_unfinished_chn1      (line_unfinished_chn1),       // output[15:0]
        .suspend_chn1              (suspend_chn1),               // input
        .xfer_reset_page1_rd       (xfer_reset_page1_rd),        // output
        .buf_wpage_nxt_chn1        (buf_wpage_nxt_chn1),         // output
        .buf_wr_chn1               (buf_wr_chn1),                // output
        .buf_wdata_chn1            (buf_wdata_chn1[63:0]),       // output[63:0] 
        .xfer_reset_page1_wr       (xfer_reset_page1_wr),        // output
        .rpage_nxt_chn1            (rpage_nxt_chn1),             // output
        .buf_rd_chn1               (buf_rd_chn1),                // output
1384
        .buf_rdata_chn1            (buf_rdata_chn1[63:0]),       // input[63:0]
1385 1386 1387 1388 1389
        .frame_start_chn2          (frame_start_chn2),           // input
        .next_page_chn2            (next_page_chn2),             // input
        .page_ready_chn2           (page_ready_chn2),            // output
        .frame_done_chn2           (frame_done_chn2),            // output
        .line_unfinished_chn2      (line_unfinished_chn2),       // output[15:0]
1390
        .frame_number_chn2         (), //frame_number_chn2),     // output[15:0]  
1391
        .suspend_chn2              (suspend_chn2),               // input
1392
        
1393 1394 1395 1396 1397
        .frame_start_chn3          (frame_start_chn3),           // input
        .next_page_chn3            (next_page_chn3),             // input
        .page_ready_chn3           (page_ready_chn3),            // output
        .frame_done_chn3           (frame_done_chn3),            // output
        .line_unfinished_chn3      (line_unfinished_chn3),       // output[15:0] 
1398
        .frame_number_chn3         (), //frame_number_chn3),     // output[15:0]  
1399
        .suspend_chn3              (suspend_chn3),               // input
1400
        
1401 1402 1403 1404 1405
        .frame_start_chn4          (frame_start_chn4),           // input
        .next_page_chn4            (next_page_chn4),             // input
        .page_ready_chn4           (page_ready_chn4),            // output
        .frame_done_chn4           (frame_done_chn4),            // output
        .line_unfinished_chn4      (line_unfinished_chn4),       // output[15:0]
1406
        .frame_number_chn4         (), //frame_number_chn4),     // output[15:0]  
1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426
        .suspend_chn4              (suspend_chn4),               // input

        .SDRST                     (SDRST),                      // output
        .SDCLK                     (SDCLK),                      // output
        .SDNCLK                    (SDNCLK),                     // output
        .SDA                       (SDA),                        // output[14:0] 
        .SDBA                      (SDBA),                       // output[2:0] 
        .SDWE                      (SDWE),                       // output
        .SDRAS                     (SDRAS),                      // output
        .SDCAS                     (SDCAS),                      // output
        .SDCKE                     (SDCKE),                      // output
        .SDODT                     (SDODT),                      // output
        .SDD                       (SDD),                        // inout[15:0] 
        .SDDML                     (SDDML),                      // output
        .DQSL                      (DQSL),                       // inout
        .NDQSL                     (NDQSL),                      // inout
        .SDDMU                     (SDDMU),                      // output
        .DQSU                      (DQSU),                       // inout
        .NDQSU                     (NDQSU),                      // inout
        .tmp_debug                 (tmp_debug)                   // output[11:0] 
1427
    );
1428
    // AFI0 (AXI_HP0) signals
1429 1430 1431 1432 1433 1434 1435 1436
    wire [31:0] afi0_awaddr;   // output[31:0]
    wire        afi0_awvalid;  // output
    wire        afi0_awready;     // input
    wire [ 5:0] afi0_awid;     // output[5:0] 
    wire [ 1:0] afi0_awlock;     // output[1:0] 
    wire [ 3:0] afi0_awcache;     // output[3:0] 
    wire [ 2:0] afi0_awprot;     // output[2:0] 
    wire [ 3:0] afi0_awlen;     // output[3:0] 
1437
    wire [ 1:0] afi0_awsize;     // output[2:0] 
1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460
    wire [ 1:0] afi0_awburst;     // output[1:0] 
    wire [ 3:0] afi0_awqos;     // output[3:0] 
    wire [63:0] afi0_wdata;     // output[63:0] 
    wire        afi0_wvalid;     // output
    wire        afi0_wready;     // input
    wire [ 5:0] afi0_wid;     // output[5:0] 
    wire        afi0_wlast;     // output
    wire [ 7:0] afi0_wstrb;     // output[7:0] 
    wire        afi0_bvalid;     // input
    wire        afi0_bready;     // output
    wire [ 5:0] afi0_bid;     // input[5:0] 
    wire [ 1:0] afi0_bresp;     // input[1:0] 
    wire [ 7:0] afi0_wcount;     // input[7:0] 
    wire [ 5:0] afi0_wacount;     // input[5:0] 
    wire        afi0_wrissuecap1en;     // output
    wire [31:0] afi0_araddr;     // output[31:0] 
    wire        afi0_arvalid;     // output
    wire        afi0_arready