cmd_encod_tiled_32_rd.v 19.4 KB
Newer Older
1 2 3
/*******************************************************************************
 * Module: cmd_encod_tiled_32_rd
 * Date:2015-02-218  
4
 * Author: Andrey Filippov     
5
 * Description: Command sequencer generator for reading a tiled area
6 7 8
 * up to 1 kB. Memory is mapped so 8 consecuitive rows have same RA, CA
 * and alternating BA (0 to 7). Data will be read in columns 32 bytes wide,
 * then proceding to the next column (if >1).
9
 * This is a modification of module: cmd_encod_tiled_32_rd,
10 11 12
 * just reading 32 bytes per row instead of the 16 - that eases timing
 * Start burst should be even (LSB is ignored)
 *
13
 * Copyright (c) 2015 Elphel, Inc.
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
 * cmd_encod_tiled_32_rd.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 *  cmd_encod_tiled_32_rd.v is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *******************************************************************************/
`timescale 1ns/1ps
/*
TODO  Comments from cmd_encod_tiled_rd, update
Minimal ACTIVATE period =4 Tcm or 10ns, so maximal no-miss rate is Tck=1.25 ns (800 MHz)
Minimal window of 4 ACTIVATE pulses - 16 Tck or 40 (40 ns), so one ACTIVATE per 8 Tck is still OK down to 1.25 ns
Reads are in 16-byte colums: 1 8-burst (16 bytes) in a row, then next row, bank inc first. Then (if needed) - next column
Number of rows should be >=5 (4 now for tCK=2.5ns to meet tRP (precharge to activate) of the same bank (tRP=13ns)
Can read less if just one column
TODO: Maybe allow less rows with different sequence (no autoprecharge/no activate?) Will not work if row crosses page boundary
number fo rows>1!

Known issues:
39
1: Most tile heights cause timing violation. Valid height mod 8 can be 0,6,7 (1,2,3,4,5 - invalid - wrong - that was for tile16 mode)
40 41 42 43 44 45 46 47 48 49
2: With option "keep_open" there should be no page boundary crossings, caller only checks the first line, and if window full width
 is not multiple of CAS page, page crossings can appear on other than first line (fix caller to use largest common divider of page and
 frame full width? Seems easy to fix
*/

module  cmd_encod_tiled_32_rd #(
    parameter ADDRESS_NUMBER=       15,
    parameter COLADDR_NUMBER=       10,
    parameter CMD_PAUSE_BITS=       10,
    parameter CMD_DONE_BIT=         10,  // VDT BUG: CMD_DONE_BIT is used in a function call parameter!
50 51
    parameter FRAME_WIDTH_BITS=     13,  // Maximal frame width - 8-word (16 bytes) bursts 
    parameter RSEL=                 1'b1 // Late/early READ commands
52
) (
53
    input                        mrst,
54 55 56 57 58 59 60 61 62 63 64 65
    input                        clk,
// programming interface
    input                  [2:0] start_bank,    // bank address
    input   [ADDRESS_NUMBER-1:0] start_row,     // memory row
    input   [COLADDR_NUMBER-4:0] start_col,     // start memory column in 8-bit bursts 
    input [FRAME_WIDTH_BITS:0] rowcol_inc_in, // increment {row.col} when bank rolls over, removed 3 LSBs (in 8-bursts)
    input                  [5:0] num_rows_in_m1,   // number of rows to read minus 1 
    input                  [5:0] num_cols_in_m1,   // number of 32-pixel columns to read (rows first, then columns) - 1
                                                   //(for compatibility with cmd_encod_tiled, LSB will be ignored)
    input                        keep_open_in,  // keep banks open (for <=8 banks only
    input                        skip_next_page_in, // do not reset external buffer (continue)    
    input                        start,       // start generating commands
66
    output reg            [31:0] enc_cmd,     // encoded command SuppressThisWarning VivadoSynthesis: [Synth 8-3332] Sequential element cmd_encod_tiled_32_rd.enc_cmd_reg[11:9,7:5,2] is unused and will be removed from module cmd_encod_tiled_32_rd.
67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
    output reg                   enc_wr,      // write encoded command
    output reg                   enc_done     // encoding finished
);
    localparam FULL_ADDR_NUMBER=ADDRESS_NUMBER+COLADDR_NUMBER; // excluding 3 CA lsb, but adding 3 bank
    localparam ROM_WIDTH=10;
    localparam ROM_DEPTH=4;
    
    localparam ENC_NOP=        0;
    localparam ENC_BUF_WR=     1;
    localparam ENC_DCI=        2;
    localparam ENC_SEL=        3;
    localparam ENC_CMD_SHIFT=  4; // [5:4] - command: 0 -= NOP, 1 - READ, 2 - PRECHARGE, 3 - ACTIVATE
    localparam ENC_PAUSE_SHIFT=6; // [7:6] - 2- bit pause (for NOP commandes)
    localparam ENC_PRE_DONE=   8;
    localparam ENC_BUF_PGNEXT= 9;
    
    localparam ENC_CMD_NOP=      0; // 2-bit locally encoded commands
    localparam ENC_CMD_READ=     1;
//    localparam ENC_CMD_PRECHARGE=2;
    localparam ENC_CMD_ACTIVATE= 2; // using autoprecharge, so no PRECHARGE is needed. When en_act==0, ENC_CMD_ACTIVATE-> ENC_CMD_NOP (delay should be 0)
//    localparam REPEAT_ADDR=3;
    localparam LOOP_FIRST=   4; // address of the first word in a loop
    localparam LOOP_LAST=    6; // address of the last word in a loop
    localparam CMD_NOP=      0; // 3-bit normal memory RCW commands (positive logic)
    localparam CMD_READ=     2;
//    localparam CMD_PRECHARGE=5;
    localparam CMD_ACTIVATE= 4;
//    localparam AUTOPRECHARGE_BIT=COLADDR_NUMBER;
    
    reg   [ADDRESS_NUMBER-1:0] row;     // memory row
97
    reg   [COLADDR_NUMBER-4:0] col;     // start memory column in 8-bursts SuppressThisWarning VivadoSynthesis: [Synth 8-3332] Sequential element cmd_encod_tiled_32_rd.col_reg[0] is unused and will be removed from module cmd_encod_tiled_32_rd.
98 99
    reg                  [2:0] bank;    // memory bank;
    reg                  [5:0] num_rows_m1;  // number of rows in a tile minus 1
100
    reg                  [5:0] num_cols128_m2;  // number of r16-byte columns in a tile  -2 (even columns) SuppressThisWarning VivadoSynthesis: [Synth 8-3332] Sequential element cmd_encod_tiled_32_rd.num_cols128_m2_reg[0] is unused and will be removed from module cmd_encod_tiled_32_rd.
101 102 103 104 105 106
//    reg  [FULL_ADDR_NUMBER-4:0] rowcol_inc; // increment {row.col} when bank rolls over, remove 3 LSBs (in 8-bursts)
    reg   [FRAME_WIDTH_BITS:0] rowcol_inc; // increment {row.col} when bank rolls over, remove 3 LSBs (in 8-bursts)
    
    reg                        keep_open;                        
    reg                        skip_next_page;
    reg                        gen_run;
107
//    reg                        gen_run_d; // to output "done"?
108 109 110 111 112 113 114
    reg        [ROM_DEPTH-1:0] gen_addr; // will overrun as stop comes from ROM
    
    reg        [ROM_WIDTH-1:0] rom_r; 
    wire                       pre_done;
    wire                 [1:0] rom_cmd;
    wire                 [1:0] rom_skip;
    wire                 [2:0] full_cmd;
115
//    reg                        done;
116 117 118 119 120 121 122
    
    reg [FULL_ADDR_NUMBER-4:0] top_rc; // top combined row,column,bank burst address (excludes 3 CA LSBs), valid/modified @pre_act
    reg                        first_col;
    reg                        last_col;
    wire                       pre_act; //1 cycle before optional ACTIVATE
    wire                       pre_read; //1 cycle before READ command
    reg                  [5:0] scan_row; // current row in a tile (valid @pre_act)
123
    reg                  [5:0] scan_col; // current 16-byte column in a tile (valid @pre_act) SuppressThisWarning VivadoSynthesis: [Synth 8-3332] Sequential element cmd_encod_tiled_32_rd.scan_col_reg[0] is unused and will be removed from module cmd_encod_tiled_32_rd.
124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
    reg                        start_d; // start, delayed by 1 clocks
    wire                       last_row;
    reg [FULL_ADDR_NUMBER-1:0] row_col_bank;     // RA,CA, BA - valid @pre_act;
    wire   [COLADDR_NUMBER-1:0] col_bank;// CA, BA - valid @ pre_read; 
    
    wire                       enable_act;
    reg                       enable_autopre;
    
    wire                 [2:0] next_bank_w;
    wire [ADDRESS_NUMBER+COLADDR_NUMBER-4:0] next_rowcol_w; // next row/col when bank rolls over (in 8-bursts)
    
    reg                        loop_continue;

    wire [FULL_ADDR_NUMBER-1:0] row_col_bank_next_w;     // RA,CA, BA - valid @pre_act;
    assign row_col_bank_next_w= last_row?
                                {top_rc,bank}: // can not work if ACTIVATE is next after ACTIVATE in the last row (single-row tile)
                                (&row_col_bank[2:0]? // bank==7
                                      {next_rowcol_w,3'b0}:  
                                      {row_col_bank[FULL_ADDR_NUMBER-1:3],next_bank_w});
                                

    assign     pre_done=rom_r[ENC_PRE_DONE] && gen_run;
//    assign     rom_cmd=  rom_r[ENC_CMD_SHIFT+:2] & {enable_act,1'b1}; // disable bit 1 if activate is disabled (not the first column)
    assign     rom_cmd=  rom_r[ENC_CMD_SHIFT+:2]; //  & {enable_act,1'b1}; // disable bit 1 if activate is disabled (not the first column)
    assign     rom_skip= rom_r[ENC_PAUSE_SHIFT+:2];
    assign     full_cmd= (enable_act && rom_cmd[1])?CMD_ACTIVATE:(rom_cmd[0]?CMD_READ:CMD_NOP);
    
    assign last_row=       (scan_row==num_rows_m1);
    assign enable_act=     first_col || !keep_open; // TODO: do not forget to zero addresses too (or they will become pause/done)
    assign next_bank_w=    row_col_bank[2:0]+1; //bank+1;
    assign next_rowcol_w=row_col_bank[FULL_ADDR_NUMBER-1:3]+rowcol_inc;
    
    assign pre_act=        gen_run && rom_cmd[1]; //1 cycle before optional ACTIVATE
    assign pre_read=       rom_r[ENC_CMD_SHIFT]; //1 cycle before READ command
    
    
160 161
    always @ (posedge clk) begin
        if (mrst)          gen_run <= 0;
162 163 164
        else if (start_d)  gen_run<= 1; // delaying
        else if (pre_done) gen_run<= 0;
        
165 166
//        if (rst)           gen_run_d <= 0;
//        else               gen_run_d <= gen_run;
167

168
        if (mrst)       num_rows_m1 <= 0;                    
169
        else if (start) num_rows_m1 <= num_rows_in_m1;  // number of rows
170 171
        
        if (mrst)       num_cols128_m2 <= 0;
172 173
        else if (start)         num_cols128_m2 <= num_cols_in_m1 & ~1;  // number of r32-byte columns
        
174
        if (mrst)         start_d <=0;
175 176
        else             start_d <=  start;
        
177
        if (mrst)                     top_rc <= 0;
178 179 180
        else if (start_d)             top_rc <= {row,col}+2;
        else if (pre_act && last_row) top_rc <= top_rc+2; // may increment RA  

181
        if (mrst)                          row_col_bank <= 0;
182 183 184 185 186
        else if (start_d)                 row_col_bank <= {row,col,bank}; // TODO: Use start_col,... and start, not start_d?
        
        else if (pre_act)               row_col_bank <= row_col_bank_next_w; 
        

187
        if (mrst)                     scan_row <= 0;
188 189 190
        else if (start_d)             scan_row <= 0;
        else if (pre_act)             scan_row <= last_row?0:scan_row+1;
        
191
        if (mrst)                      scan_col <= 0;
192 193 194
        else if (start_d)             scan_col <= 0;
        else if (pre_act && last_row) scan_col <= scan_col+2; // for ACTIVATE, not for READ

195
        if (mrst)                     first_col <= 0;
196 197 198
        else if (start_d)             first_col <= 1;
        else if (pre_act && last_row) first_col  <= 0;

199
        if (mrst)                     last_col <= 0;
200 201 202
        else if (start_d)             last_col <= num_cols128_m2==0; // if single column - will start with 1'b1;
        else if (pre_act)             last_col <= (scan_col==num_cols128_m2); // too early for READ ?

203
        if (mrst)                     enable_autopre <= 0;
204 205 206
        else if (start_d)             enable_autopre <= 0;
        else if (pre_act)             enable_autopre <=  last_col || !keep_open; // delayed by 2 pre_act tacts form last_col, OK with a single column
        
207
        if (mrst)     loop_continue<=0;
208 209
        else loop_continue <=  (scan_col==num_cols128_m2) && last_row;                 
        
210
        if (mrst)                    gen_addr <= 0;
211 212 213 214 215 216 217 218 219 220 221 222 223 224 225
        else if (!start_d && !gen_run) gen_addr <= 0;
        else if ((gen_addr==LOOP_LAST) && !loop_continue) gen_addr <= LOOP_FIRST; // skip loop alltogeter
        else                         gen_addr <= gen_addr+1; // not in a loop
    end
    
    always @ (posedge clk) if (start) begin
        row<=start_row;
        col <= start_col & ~1;
        bank <= start_bank;
        rowcol_inc <= rowcol_inc_in;
        keep_open <= keep_open_in && (|num_cols_in_m1[5:3] == 0);
        skip_next_page <= skip_next_page_in;
    end
    
    // ROM-based (registered output) encoded sequence
226 227
    always @ (posedge clk) begin
        if (mrst)           rom_r <= 0;
228 229 230
        else case (gen_addr)
            4'h0: rom_r <= (ENC_CMD_ACTIVATE <<  ENC_CMD_SHIFT)  | (1 << ENC_NOP) | (1 << ENC_PAUSE_SHIFT); // here does not matter, just to work with masked ACTIVATE
            4'h1: rom_r <= (ENC_CMD_ACTIVATE <<  ENC_CMD_SHIFT);
231 232
            4'h2: rom_r <= (ENC_CMD_READ <<      ENC_CMD_SHIFT) | (1 << ENC_NOP)         | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
            4'h3: rom_r <= (ENC_CMD_READ <<      ENC_CMD_SHIFT)                          | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
233
// loop:            
234 235 236
            4'h4: rom_r <= (ENC_CMD_ACTIVATE <<  ENC_CMD_SHIFT)                          | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
            4'h5: rom_r <= (ENC_CMD_READ <<      ENC_CMD_SHIFT) | (1 << ENC_NOP)         | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
            4'h6: rom_r <= (ENC_CMD_READ <<      ENC_CMD_SHIFT)                          | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
237
// end loop            
238 239 240
            4'h7: rom_r <= (ENC_CMD_NOP <<       ENC_CMD_SHIFT)                          | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
            4'h8: rom_r <= (ENC_CMD_READ <<      ENC_CMD_SHIFT) | (1 << ENC_NOP)         | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL);
            4'h9: rom_r <= (ENC_CMD_READ <<      ENC_CMD_SHIFT)                          | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
241
// do not combine this NOP -  ENC_CMD_READ + ENC_NOP enables autoprecharge
242 243 244
            4'ha: rom_r <= (ENC_CMD_NOP <<       ENC_CMD_SHIFT)                          | (1 << ENC_BUF_WR) | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
            4'hb: rom_r <= (ENC_CMD_NOP <<       ENC_CMD_SHIFT) | (1 << ENC_PAUSE_SHIFT)                     | (1 << ENC_DCI) | (RSEL << ENC_SEL); 
            4'hc: rom_r <= (ENC_CMD_NOP <<       ENC_CMD_SHIFT) | (1 << ENC_DCI) | (RSEL << ENC_SEL) | (1 << ENC_BUF_PGNEXT); 
245 246 247 248 249
            4'hd: rom_r <= (ENC_CMD_NOP <<       ENC_CMD_SHIFT) | (3 << ENC_PAUSE_SHIFT)                     | (1 << ENC_DCI);
            4'he: rom_r <= (ENC_CMD_NOP <<       ENC_CMD_SHIFT) | (1 << ENC_PRE_DONE);
            default:rom_r <= 0;
       endcase
    end
250
    always @ (posedge clk) begin
251
        
252
        if (mrst)           enc_wr <= 0;
253
        else               enc_wr <= gen_run; //  || gen_run_d;
254
        
255
        if (mrst)           enc_done <= 0;
256
        else               enc_done <= enc_wr && !gen_run; // !gen_run_d;
257
        
258
        if (mrst)             enc_cmd <= 0;
259
//        else if ((rom_cmd==0) || (rom_cmd[1] && !enable_act)) enc_cmd <= func_encode_skip ( // encode pause
260 261
        else if (gen_run) begin
          if (rom_cmd[0] || (rom_cmd[1] && enable_act)) enc_cmd <= func_encode_cmd ( // encode non-NOP command
262 263 264 265 266
            rom_cmd[1]? // activate
            row_col_bank[FULL_ADDR_NUMBER-1:COLADDR_NUMBER]: // top combined row,column,bank burst address (excludes 3 CA LSBs), valid/modified @pre_act
                    {{ADDRESS_NUMBER-COLADDR_NUMBER-1{1'b0}},
                        enable_autopre & ~rom_r[ENC_NOP],
                        {col_bank[COLADDR_NUMBER-1:4],~rom_r[ENC_NOP]},
267
                        3'b0}, //  [14:0] addr;       // 15-bit row/column address
268 269
            rom_cmd[1]?
                row_col_bank[2:0]:
270
                col_bank[2:0],       //
271
            full_cmd[2:0],           //   rcw;        // RAS/CAS/WE, positive logic. full_cmd[0]==0 (never write/precharge) => enc_cmd_reg[11]==0
272 273 274 275 276 277 278 279 280 281 282
            1'b0,                    //   odt_en;     // enable ODT
            1'b0,                    //   cke;        // disable CKE
            rom_r[ENC_SEL],          //   sel;        // first/second half-cycle, other will be nop (cke+odt applicable to both)
            1'b0,                    //   dq_en;      // enable (not tristate) DQ  lines (internal timing sequencer for 0->1 and 1->0)
            1'b0,                    //   dqs_en;     // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
            1'b0,                    //   dqs_toggle; // enable toggle DQS according to the pattern
            rom_r[ENC_DCI],          //   dci;        // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
            rom_r[ENC_BUF_WR],       //   buf_wr;     // connect to external buffer (but only if not paused)
            1'b0,                    //   buf_rd;     // connect to external buffer (but only if not paused)     
            rom_r[ENC_NOP],          //   nop;        // add NOP after the current command, keep other data
            rom_r[ENC_BUF_PGNEXT] && !skip_next_page);     //   buf_rst;    // connect to external buffer (but only if not paused)
283
          else enc_cmd <= func_encode_skip ( // encode pause
284
            {{CMD_PAUSE_BITS-2{1'b0}},rom_skip[1:0]}, // skip;   // number of extra cycles to skip (and keep all the other outputs)
285
            pre_done, // done,                                     // end of sequence 
286 287 288 289 290 291 292 293 294 295 296
            3'b0,                    // bank (here OK to be any)
            1'b0,                    //   odt_en;     // enable ODT
            1'b0,                    //   cke;        // disable CKE
            rom_r[ENC_SEL],          //   sel;        // first/second half-cycle, other will be nop (cke+odt applicable to both)
            1'b0,                    //   dq_en;      // enable (not tristate) DQ  lines (internal timing sequencer for 0->1 and 1->0)
            1'b0,                    //   dqs_en;     // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
            1'b0,                    //   dqs_toggle; // enable toggle DQS according to the pattern
            rom_r[ENC_DCI],          //   dci;        // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
            rom_r[ENC_BUF_WR],       //   buf_wr;     // connect to external buffer (but only if not paused)
            1'b0,                    //   buf_rd;     // connect to external buffer (but only if not paused)
            rom_r[ENC_BUF_PGNEXT] && !skip_next_page);     //   buf_rst;    // connect to external buffer (but only if not paused)
297 298
        end
    end    
299 300 301
    fifo_2regs #(
        .WIDTH(COLADDR_NUMBER)
    ) fifo_2regs_i (
302 303 304 305 306 307 308
        .mrst  (mrst),                             // input
        .clk   (clk),                              // input
        .din   (row_col_bank[COLADDR_NUMBER-1:0]), // input[15:0] 
        .wr    (pre_act),                          // input
        .rd    (pre_read && !rom_r[ENC_NOP]),      // input - update only after the second READ
        .srst  (start_d),                          // input
        .dout  (col_bank)                          // output[15:0] 
309 310 311 312 313
    );

`include "includes/x393_mcontr_encode_cmd.vh" 
endmodule