x393_testbench01.tf 79.6 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
/*******************************************************************************
 * Module: x393_testbench01
 * Date:2015-02-06  
 * Author: andrey     
 * Description: testbench for the initial x393.v simulation
 *
 * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
 * x393_testbench01.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 *  x393_testbench01.tf is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *******************************************************************************/
`timescale 1ns/1ps
22 23
`include "system_defines.vh"

24
//`define use200Mhz 1
25
//`define DEBUG_FIFO 1
26
`undef WAIT_MRS
27
`define SET_PER_PIN_DELAYS 1 // set individual (including per-DQ pin delays)
28 29
`define PS_PIO_WAIT_COMPLETE 0 // wait until PS PIO module finished transaction before starting a new one
// Disabled already passed test to speedup simulation
30 31
//`define TEST_WRITE_LEVELLING 1
//`define TEST_READ_PATTERN 1
32 33
`define TEST_WRITE_BLOCK 1
`define TEST_READ_BLOCK 1
34
//`define TEST_SCANLINE_WRITE
35 36
    `define TEST_SCANLINE_WRITE_WAIT 1 // wait TEST_SCANLINE_WRITE finished (frame_done)
    `define TEST_READ_SHOW  1
37
//`define TEST_TILED_WRITE  0
38
    `define TEST_TILED_WRITE_WAIT 1 // wait TEST_SCANLINE_WRITE finished (frame_done)
39

40
//`define TEST_TILED_READ  0
41

42 43
//`define TEST_TILED_WRITE32  0
//`define TEST_TILED_READ32  0
44

45
module  x393_testbench01 #(
46
`include "includes/x393_parameters.vh" // SuppressThisWarning VEditor - not used
47 48 49 50 51 52 53 54 55 56 57 58
`include "includes/x393_simulation_parameters.vh"
)(
);
`ifdef IVERILOG              
//    $display("IVERILOG is defined");
    `include "IVERILOG_INCLUDE.v"
`else
//    $display("IVERILOG is not defined");
    parameter lxtname = "x393.lxt";
`endif
`define DEBUG_WR_SINGLE 1  
`define DEBUG_RD_DATA 1  
59 60
//`include "includes/x393_cur_params_sim.vh" // parameters that may need adjustment, should be before x393_localparams.vh
`include "includes/x393_cur_params_target.vh" // SuppressThisWarning VEditor - not used parameters that may need adjustment, should be before x393_localparams.vh
61
`include "includes/x393_localparams.vh" // SuppressThisWarning VEditor - not used
62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
  // DDR3 signals
  wire        SDRST;
  wire        SDCLK;  // output
  wire        SDNCLK; // output
  wire [ADDRESS_NUMBER-1:0] SDA;    // output[14:0] 
  wire [ 2:0] SDBA;   // output[2:0] 
  wire        SDWE;   // output
  wire        SDRAS;  // output
  wire        SDCAS;  // output
  wire        SDCKE;  // output
  wire        SDODT;  // output
  wire [15:0] SDD;    // inout[15:0] 
  wire        SDDML;  // inout
  wire        DQSL;   // inout
  wire        NDQSL;  // inout
  wire        SDDMU;  // inout
  wire        DQSU;   // inout
  wire        NDQSU;  // inout
80
  wire        DUMMY_TO_KEEP;  // output to keep PS7 signals from "optimization" // SuppressThisWarning all - not used
Andrey Filippov's avatar
Andrey Filippov committed
81
//  wire        MEMCLK;
82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
  
  // Simulation signals
  reg [11:0] ARID_IN_r;
  reg [31:0] ARADDR_IN_r;
  reg  [3:0] ARLEN_IN_r;
  reg  [2:0] ARSIZE_IN_r;
  reg  [1:0] ARBURST_IN_r;
  reg [11:0] AWID_IN_r;
  reg [31:0] AWADDR_IN_r;
  reg  [3:0] AWLEN_IN_r;
  reg  [2:0] AWSIZE_IN_r;
  reg  [1:0] AWBURST_IN_r;

  reg [11:0] WID_IN_r;
  reg [31:0] WDATA_IN_r;
  reg [ 3:0] WSTRB_IN_r;
  reg        WLAST_IN_r;
  
  reg [11:0] LAST_ARID; // last issued ARID

  // SuppressWarnings VEditor : assigned in $readmem() system task
103
  wire [SIMUL_AXI_READ_WIDTH-1:0] SIMUL_AXI_ADDR_W;
104 105 106 107 108
  // SuppressWarnings VEditor
  wire        SIMUL_AXI_MISMATCH;
  // SuppressWarnings VEditor
  reg  [31:0] SIMUL_AXI_READ;
  // SuppressWarnings VEditor
109
  reg  [SIMUL_AXI_READ_WIDTH-1:0] SIMUL_AXI_ADDR;
110 111
  // SuppressWarnings VEditor
  reg         SIMUL_AXI_FULL; // some data available
112
  wire        SIMUL_AXI_EMPTY= ~rvalid && rready && (rid==LAST_ARID); //SuppressThisWarning VEditor : may be unused, just for simulation // use it to wait for?
113
  reg  [31:0] registered_rdata; // here read data from tasks goes
114 115
  // SuppressWarnings VEditor
  reg         WAITING_STATUS;   // tasks are waiting for status
116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196

  reg        CLK;
  reg        RST;
  reg        AR_SET_CMD_r;
  wire       AR_READY;

  reg        AW_SET_CMD_r;
  wire       AW_READY;

  reg        W_SET_CMD_r;
  wire       W_READY;

  wire [11:0]  #(AXI_TASK_HOLD) ARID_IN = ARID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) ARADDR_IN = ARADDR_IN_r;
  wire  [3:0]  #(AXI_TASK_HOLD) ARLEN_IN = ARLEN_IN_r;
  wire  [2:0]  #(AXI_TASK_HOLD) ARSIZE_IN = ARSIZE_IN_r;
  wire  [1:0]  #(AXI_TASK_HOLD) ARBURST_IN = ARBURST_IN_r;
  wire [11:0]  #(AXI_TASK_HOLD) AWID_IN = AWID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) AWADDR_IN = AWADDR_IN_r;
  wire  [3:0]  #(AXI_TASK_HOLD) AWLEN_IN = AWLEN_IN_r;
  wire  [2:0]  #(AXI_TASK_HOLD) AWSIZE_IN = AWSIZE_IN_r;
  wire  [1:0]  #(AXI_TASK_HOLD) AWBURST_IN = AWBURST_IN_r;
  wire [11:0]  #(AXI_TASK_HOLD) WID_IN = WID_IN_r;
  wire [31:0]  #(AXI_TASK_HOLD) WDATA_IN = WDATA_IN_r;
  wire [ 3:0]  #(AXI_TASK_HOLD) WSTRB_IN = WSTRB_IN_r;
  wire         #(AXI_TASK_HOLD) WLAST_IN = WLAST_IN_r;
  wire         #(AXI_TASK_HOLD) AR_SET_CMD = AR_SET_CMD_r;
  wire         #(AXI_TASK_HOLD) AW_SET_CMD = AW_SET_CMD_r;
  wire         #(AXI_TASK_HOLD) W_SET_CMD =  W_SET_CMD_r;

  reg  [3:0] RD_LAG;  // ready signal lag in axi read channel (0 - RDY=1, 1..15 - RDY is asserted N cycles after valid)   
  reg  [3:0] B_LAG;   // ready signal lag in axi arete response channel (0 - RDY=1, 1..15 - RDY is asserted N cycles after valid)   

// Simulation modules interconnection
  wire [11:0] arid;
  wire [31:0] araddr;
  wire [3:0]  arlen;
  wire [2:0]  arsize;
  wire [1:0]  arburst;
  // SuppressWarnings VEditor : assigned in $readmem(14) system task
  wire [3:0]  arcache;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [2:0]  arprot;
  wire        arvalid;
  wire        arready;

  wire [11:0] awid;
  wire [31:0] awaddr;
  wire [3:0]  awlen;
  wire [2:0]  awsize;
  wire [1:0]  awburst;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [3:0]  awcache;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [2:0]  awprot;
  wire        awvalid;
  wire        awready;

  wire [11:0] wid;
  wire [31:0] wdata;
  wire [3:0]  wstrb;
  wire        wlast;
  wire        wvalid;
  wire        wready;
  
  wire [31:0] rdata;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [11:0] rid;
  wire        rlast;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire  [1:0] rresp;
  wire        rvalid;
  wire        rready;
  wire        rstb=rvalid && rready;

  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire  [1:0] bresp;
  // SuppressWarnings VEditor : assigned in $readmem() system task
  wire [11:0] bid;
  wire        bvalid;
  wire        bready;
197 198
  integer     NUM_WORDS_READ;
  integer     NUM_WORDS_EXPECTED;
199
  reg  [15:0] ENABLED_CHANNELS = 0; // currently enabled memory channels
200 201
//  integer     SCANLINE_CUR_X;
//  integer     SCANLINE_CUR_Y;
202
  wire AXI_RD_EMPTY=NUM_WORDS_READ==NUM_WORDS_EXPECTED; //SuppressThisWarning VEditor : may be unused, just for simulation
203
  
204 205
  
  
206
  //NUM_XFER_BITS=6
207 208 209
//  localparam       SCANLINE_PAGES_PER_ROW= (WINDOW_WIDTH>>NUM_XFER_BITS)+((WINDOW_WIDTH[NUM_XFER_BITS-1:0]==0)?0:1);
//  localparam       TILES_PER_ROW= (WINDOW_WIDTH/TILE_WIDTH)+  ((WINDOW_WIDTH % TILE_WIDTH==0)?0:1);
//  localparam       TILE_ROWS_PER_WINDOW= ((WINDOW_HEIGHT-1)/TILE_VSTEP) + 1;
210
  
211
//  localparam       TILE_SIZE= TILE_WIDTH*TILE_HEIGHT;
212 213
  
  
214
//  localparam  integer     SCANLINE_FULL_XFER= 1<<NUM_XFER_BITS; // 64 - full page transfer in 8-bursts
215
//  localparam  integer     SCANLINE_LAST_XFER= WINDOW_WIDTH % (1<<NUM_XFER_BITS); // last page transfer size in a row
216
  
217
//  integer ii;
218
//  integer  SCANLINE_XFER_SIZE;
219
always #(CLKIN_PERIOD/2) CLK = ~CLK;
220 221 222 223 224 225 226 227 228 229 230 231 232 233
  initial begin
`ifdef IVERILOG              
    $display("IVERILOG is defined");
`else
    $display("IVERILOG is not defined");
`endif

`ifdef ICARUS              
    $display("ICARUS is defined");
`else
    $display("ICARUS is not defined");
`endif
    $dumpfile(lxtname);
  // SuppressWarnings VEditor : assigned in $readmem() system task
Andrey Filippov's avatar
Andrey Filippov committed
234
    $dumpvars(0,x393_testbench01);
235 236 237 238 239
    CLK =1'b0;
    RST = 1'bx;
    AR_SET_CMD_r = 1'b0;
    AW_SET_CMD_r = 1'b0;
    W_SET_CMD_r = 1'b0;
240 241 242
    #500;
//    $display ("x393_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.rst=%d",x393_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.rst);
    #500;
243 244 245 246
    RST = 1'b1;
    NUM_WORDS_EXPECTED =0;
//    #99000; // same as glbl
    #9000; // same as glbl
247
    repeat (20) @(posedge CLK) ;
248
    RST =1'b0;
249 250 251
//set simulation-only parameters   
    axi_set_b_lag(0); //(1);
    axi_set_rd_lag(0);
252
    program_status_all(DEFAULT_STATUS_MODE,'h2a); // mode auto with sequence number increment 
Andrey Filippov's avatar
Andrey Filippov committed
253 254

    enable_memcntrl(1);                 // enable memory controller
Andrey Filippov's avatar
Andrey Filippov committed
255

256
    set_up;
257 258
    axi_set_wbuf_delay(WBUF_DLY_DFLT); //DFLT_WBUF_DELAY - used in synth. code
    
Andrey Filippov's avatar
Andrey Filippov committed
259 260 261 262 263 264 265 266 267 268 269 270
    wait_phase_shifter_ready;
    read_all_status;
// enable output for address/commands to DDR chip    
    enable_cmda(1);
    repeat (16) @(posedge CLK) ;
// remove reset from DDR chip    
    activate_sdrst(0); // was enabled at system reset

    #5000; // actually 500 usec required
    repeat (16) @(posedge CLK) ;
    enable_cke(1);
    repeat (16) @(posedge CLK) ;
Andrey Filippov's avatar
Andrey Filippov committed
271 272 273 274 275 276 277
    
//    enable_memcntrl(1);                 // enable memory controller
    enable_memcntrl_channels(16'h0003); // only channel 0 and 1 are enabled
    configure_channel_priority(0,0);    // lowest priority channel 0
    configure_channel_priority(1,0);    // lowest priority channel 1
    enable_reset_ps_pio(1,0);           // enable, no reset

278
// set MR registers in DDR3 memory, run DCI calibration (long)
279
    wait_ps_pio_ready(DEFAULT_STATUS_MODE, 1); // wait FIFO not half full 
280
    schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
Andrey Filippov's avatar
Andrey Filippov committed
281 282
                        INITIALIZE_OFFSET, // input [9:0] seq_addr; // sequence start address
                        0,                 // input [1:0] page;     // buffer page number
283
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
284 285 286
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
                        
287 288
   
`ifdef WAIT_MRS 
289
    wait_ps_pio_done(DEFAULT_STATUS_MODE, 1);
290
`else    
Andrey Filippov's avatar
Andrey Filippov committed
291
    repeat (32) @(posedge CLK) ;  // what delay is needed to be sure? Add to PS_PIO?
292 293
//    first refreshes will be fast (accummulated while waiting)
`endif    
Andrey Filippov's avatar
Andrey Filippov committed
294
    enable_refresh(1);
295
    axi_set_dqs_odelay('h78); //??? dafaults - wrong?
296
    axi_set_dqs_odelay_nominal;
297
    
298
`ifdef TEST_WRITE_LEVELLING 
299
    $display("===================== TEST_WRITE_LEVELLING =========================");
300
    test_write_levelling;
301
`endif
302
`ifdef TEST_READ_PATTERN
303
    $display("===================== TEST_READ_PATTERN =========================");
304
    test_read_pattern;
305 306
`endif
`ifdef TEST_WRITE_BLOCK
307
    $display("===================== TEST_WRITE_BLOCK =========================");
308
    test_write_block;
309 310
`endif
`ifdef TEST_READ_BLOCK
311
    $display("===================== TEST_READ_BLOCK =========================");
312
    test_read_block;
313
`endif
314
`ifdef TESTL_SHORT_SCANLINE
315
    $display("===================== TESTL_SHORT_SCANLINE =========================");
316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370
    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  wait_done;
        1, //WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  show_data;
        1, // WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);

    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  wait_done;
        2, //WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  show_data;
        2, // WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);

    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  wait_done;
        3, //WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
        1, // input                  show_data;
        3, // WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);



`endif

371
`ifdef TEST_SCANLINE_WRITE
372
    $display("===================== TEST_SCANLINE_WRITE =========================");
373 374 375
    test_scanline_write(
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
376 377 378 379 380 381
        1, // input                  wait_done;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
        
382
`endif
383
`ifdef TEST_SCANLINE_READ
384
    $display("===================== TEST_SCANLINE_READ =========================");
385 386 387
    test_scanline_read (
        1, // valid: 1 or 3 input            [3:0] channel;
        SCANLINE_EXTRA_PAGES, // input            [1:0] extra_pages;
388 389 390 391 392 393
        1, // input                  show_data;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0);
        
394 395
`endif

396
`ifdef TEST_TILED_WRITE
397
    $display("===================== TEST_TILED_WRITE =========================");
398 399 400 401 402
    test_tiled_write (
         2,                 // [3:0] channel;
         0,                 //       byte32;
         TILED_KEEP_OPEN,   //       keep_open;
         TILED_EXTRA_PAGES, //       extra_pages;
403 404 405 406 407 408 409 410
         1,                //       wait_done;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
411 412
`endif

413
`ifdef TEST_TILED_READ
414
    $display("===================== TEST_TILED_READ =========================");
415
    test_tiled_read (
416 417 418 419 420 421 422 423 424 425 426 427 428
        2,                 // [3:0] channel;
        0,                 //       byte32;
        TILED_KEEP_OPEN,   //       keep_open;
        TILED_EXTRA_PAGES, //       extra_pages;
        1,                 //       show_data;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
         
429 430
`endif

431
`ifdef TEST_TILED_WRITE32
432
    $display("===================== TEST_TILED_WRITE32 =========================");
433
    test_tiled_write (
434 435 436 437 438 439 440 441 442 443 444 445
        4, // 2,                 // [3:0] channel;
        1,                 //       byte32;
        TILED_KEEP_OPEN,   //       keep_open;
        TILED_EXTRA_PAGES, //       extra_pages;
        1,                 //       wait_done;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
446 447 448
`endif

`ifdef TEST_TILED_READ32
449
    $display("===================== TEST_TILED_READ32 =========================");
450
    test_tiled_read (
451 452 453 454 455 456 457 458 459 460 461 462
        4, //2,                 // [3:0] channel;
        1,                 //       byte32;
        TILED_KEEP_OPEN,   //       keep_open;
        TILED_EXTRA_PAGES, //       extra_pages;
        1,                 //       show_data;
        WINDOW_WIDTH,
        WINDOW_HEIGHT,
        WINDOW_X0,
        WINDOW_Y0,
        TILE_WIDTH,
        TILE_HEIGHT,
        TILE_VSTEP);
463
`endif
464
  #20000;
465
  $finish;
466 467 468 469
end
// protect from never end
  initial begin
//  #10000000;
470
     #200000;
471
//     #42000;
472
//   #100000;
473
//  #60000;
474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528
    $display("finish testbench 2");
  $finish;
  end



assign x393_i.ps7_i.FCLKCLK=        {4{CLK}};
assign x393_i.ps7_i.FCLKRESETN=     {RST,~RST,RST,~RST};
// Read address
assign x393_i.ps7_i.MAXIGP0ARADDR=  araddr;
assign x393_i.ps7_i.MAXIGP0ARVALID= arvalid;
assign arready=                            x393_i.ps7_i.MAXIGP0ARREADY;
assign x393_i.ps7_i.MAXIGP0ARID=    arid; 
assign x393_i.ps7_i.MAXIGP0ARLEN=   arlen;
assign x393_i.ps7_i.MAXIGP0ARSIZE=  arsize[1:0]; // arsize[2] is not used
assign x393_i.ps7_i.MAXIGP0ARBURST= arburst;
// Read data
assign rdata=                              x393_i.ps7_i.MAXIGP0RDATA; 
assign rvalid=                             x393_i.ps7_i.MAXIGP0RVALID;
assign x393_i.ps7_i.MAXIGP0RREADY=  rready;
assign rid=                                x393_i.ps7_i.MAXIGP0RID;
assign rlast=                              x393_i.ps7_i.MAXIGP0RLAST;
assign rresp=                              x393_i.ps7_i.MAXIGP0RRESP;
// Write address
assign x393_i.ps7_i.MAXIGP0AWADDR=  awaddr;
assign x393_i.ps7_i.MAXIGP0AWVALID= awvalid;

assign awready=                            x393_i.ps7_i.MAXIGP0AWREADY;

//assign awready= AWREADY_AAAA;
assign x393_i.ps7_i.MAXIGP0AWID=awid;

      // SuppressWarnings VEditor all
//  wire [ 1:0] AWLOCK;
      // SuppressWarnings VEditor all
//  wire [ 3:0] AWCACHE;
      // SuppressWarnings VEditor all
//  wire [ 2:0] AWPROT;
assign x393_i.ps7_i.MAXIGP0AWLEN=   awlen;
assign x393_i.ps7_i.MAXIGP0AWSIZE=  awsize[1:0]; // awsize[2] is not used
assign x393_i.ps7_i.MAXIGP0AWBURST= awburst;
      // SuppressWarnings VEditor all
//  wire [ 3:0] AWQOS;
// Write data
assign x393_i.ps7_i.MAXIGP0WDATA=   wdata;
assign x393_i.ps7_i.MAXIGP0WVALID=  wvalid;
assign wready=                             x393_i.ps7_i.MAXIGP0WREADY;
assign x393_i.ps7_i.MAXIGP0WID=     wid;
assign x393_i.ps7_i.MAXIGP0WLAST=   wlast;
assign x393_i.ps7_i.MAXIGP0WSTRB=   wstrb;
// Write responce
assign bvalid=                             x393_i.ps7_i.MAXIGP0BVALID;
assign x393_i.ps7_i.MAXIGP0BREADY=  bready;
assign bid=                                x393_i.ps7_i.MAXIGP0BID;
assign bresp=                              x393_i.ps7_i.MAXIGP0BRESP;
529
//TODO: See how to show problems in include files opened in the editor (test all top *.v files that have it)
530 531 532 533 534 535
// Top module under test
    x393 #(
        .MCONTR_WR_MASK                    (MCONTR_WR_MASK),
        .MCONTR_RD_MASK                    (MCONTR_RD_MASK),
        .MCONTR_CMD_WR_ADDR                (MCONTR_CMD_WR_ADDR),
        .MCONTR_BUF0_RD_ADDR               (MCONTR_BUF0_RD_ADDR),
536 537
        .MCONTR_BUF0_WR_ADDR               (MCONTR_BUF0_WR_ADDR),
        .MCONTR_BUF1_RD_ADDR               (MCONTR_BUF1_RD_ADDR),
538 539
        .MCONTR_BUF1_WR_ADDR               (MCONTR_BUF1_WR_ADDR),
        .MCONTR_BUF2_RD_ADDR               (MCONTR_BUF2_RD_ADDR),
540 541
        .MCONTR_BUF2_WR_ADDR               (MCONTR_BUF2_WR_ADDR),
        .MCONTR_BUF3_RD_ADDR               (MCONTR_BUF3_RD_ADDR),
542 543
        .MCONTR_BUF3_WR_ADDR               (MCONTR_BUF3_WR_ADDR),
        .MCONTR_BUF4_RD_ADDR               (MCONTR_BUF4_RD_ADDR),
544
        .MCONTR_BUF4_WR_ADDR               (MCONTR_BUF4_WR_ADDR),
545 546 547 548 549 550 551
        .CONTROL_ADDR                      (CONTROL_ADDR),
        .CONTROL_ADDR_MASK                 (CONTROL_ADDR_MASK),
        .STATUS_ADDR                       (STATUS_ADDR),
        .STATUS_ADDR_MASK                  (STATUS_ADDR_MASK),
        .AXI_WR_ADDR_BITS                  (AXI_WR_ADDR_BITS),
        .AXI_RD_ADDR_BITS                  (AXI_RD_ADDR_BITS),
        .STATUS_DEPTH                      (STATUS_DEPTH),
552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646
        .DLY_LD                            (DLY_LD),
        .DLY_LD_MASK                       (DLY_LD_MASK),
        .MCONTR_PHY_0BIT_ADDR              (MCONTR_PHY_0BIT_ADDR),
        .MCONTR_PHY_0BIT_ADDR_MASK         (MCONTR_PHY_0BIT_ADDR_MASK),
        .MCONTR_PHY_0BIT_DLY_SET           (MCONTR_PHY_0BIT_DLY_SET),
        .MCONTR_PHY_0BIT_CMDA_EN           (MCONTR_PHY_0BIT_CMDA_EN),
        .MCONTR_PHY_0BIT_SDRST_ACT         (MCONTR_PHY_0BIT_SDRST_ACT),
        .MCONTR_PHY_0BIT_CKE_EN            (MCONTR_PHY_0BIT_CKE_EN),
        .MCONTR_PHY_0BIT_DCI_RST           (MCONTR_PHY_0BIT_DCI_RST),
        .MCONTR_PHY_0BIT_DLY_RST           (MCONTR_PHY_0BIT_DLY_RST),
        .MCONTR_TOP_0BIT_ADDR              (MCONTR_TOP_0BIT_ADDR),
        .MCONTR_TOP_0BIT_ADDR_MASK         (MCONTR_TOP_0BIT_ADDR_MASK),
        .MCONTR_TOP_0BIT_MCONTR_EN         (MCONTR_TOP_0BIT_MCONTR_EN),
        .MCONTR_TOP_0BIT_REFRESH_EN        (MCONTR_TOP_0BIT_REFRESH_EN),
        .MCONTR_PHY_16BIT_ADDR             (MCONTR_PHY_16BIT_ADDR),
        .MCONTR_PHY_16BIT_ADDR_MASK        (MCONTR_PHY_16BIT_ADDR_MASK),
        .MCONTR_PHY_16BIT_PATTERNS         (MCONTR_PHY_16BIT_PATTERNS),
        .MCONTR_PHY_16BIT_PATTERNS_TRI     (MCONTR_PHY_16BIT_PATTERNS_TRI),
        .MCONTR_PHY_16BIT_WBUF_DELAY       (MCONTR_PHY_16BIT_WBUF_DELAY),
        .MCONTR_PHY_16BIT_EXTRA            (MCONTR_PHY_16BIT_EXTRA),
        .MCONTR_PHY_STATUS_CNTRL           (MCONTR_PHY_STATUS_CNTRL),
        .MCONTR_ARBIT_ADDR                 (MCONTR_ARBIT_ADDR),
        .MCONTR_ARBIT_ADDR_MASK            (MCONTR_ARBIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_ADDR             (MCONTR_TOP_16BIT_ADDR),
        .MCONTR_TOP_16BIT_ADDR_MASK        (MCONTR_TOP_16BIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_CHN_EN           (MCONTR_TOP_16BIT_CHN_EN),
        .MCONTR_TOP_16BIT_REFRESH_PERIOD   (MCONTR_TOP_16BIT_REFRESH_PERIOD),
        .MCONTR_TOP_16BIT_REFRESH_ADDRESS  (MCONTR_TOP_16BIT_REFRESH_ADDRESS),
        .MCONTR_TOP_16BIT_STATUS_CNTRL     (MCONTR_TOP_16BIT_STATUS_CNTRL),
        .MCONTR_PHY_STATUS_REG_ADDR        (MCONTR_PHY_STATUS_REG_ADDR),
        .MCONTR_TOP_STATUS_REG_ADDR        (MCONTR_TOP_STATUS_REG_ADDR),
        .CHNBUF_READ_LATENCY               (CHNBUF_READ_LATENCY),
        .DFLT_DQS_PATTERN                  (DFLT_DQS_PATTERN),
        .DFLT_DQM_PATTERN                  (DFLT_DQM_PATTERN),
        .DFLT_DQ_TRI_ON_PATTERN            (DFLT_DQ_TRI_ON_PATTERN),
        .DFLT_DQ_TRI_OFF_PATTERN           (DFLT_DQ_TRI_OFF_PATTERN),
        .DFLT_DQS_TRI_ON_PATTERN           (DFLT_DQS_TRI_ON_PATTERN),
        .DFLT_DQS_TRI_OFF_PATTERN          (DFLT_DQS_TRI_OFF_PATTERN),
        .DFLT_WBUF_DELAY                   (DFLT_WBUF_DELAY),
        .DFLT_INV_CLK_DIV                  (DFLT_INV_CLK_DIV),
        .DFLT_CHN_EN                       (DFLT_CHN_EN),
        .DFLT_REFRESH_ADDR                 (DFLT_REFRESH_ADDR),
        .DFLT_REFRESH_PERIOD               (DFLT_REFRESH_PERIOD),
        .ADDRESS_NUMBER                    (ADDRESS_NUMBER),
        .COLADDR_NUMBER                    (COLADDR_NUMBER),
        .PHASE_WIDTH                       (PHASE_WIDTH),
        .SLEW_DQ                           (SLEW_DQ),
        .SLEW_DQS                          (SLEW_DQS),
        .SLEW_CMDA                         (SLEW_CMDA),
        .SLEW_CLK                          (SLEW_CLK),
        .IBUF_LOW_PWR                      (IBUF_LOW_PWR),
        .REFCLK_FREQUENCY                  (REFCLK_FREQUENCY),
        .HIGH_PERFORMANCE_MODE             (HIGH_PERFORMANCE_MODE),
        .CLKIN_PERIOD                      (CLKIN_PERIOD),
        .CLKFBOUT_MULT                     (CLKFBOUT_MULT),
        .CLKFBOUT_MULT_REF                 (CLKFBOUT_MULT_REF),
        .CLKFBOUT_DIV_REF                  (CLKFBOUT_DIV_REF),
        .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
        .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
        .SDCLK_PHASE                       (SDCLK_PHASE),
        .CLK_PHASE                         (CLK_PHASE),
        .CLK_DIV_PHASE                     (CLK_DIV_PHASE),
        .MCLK_PHASE                        (MCLK_PHASE),
        .REF_JITTER1                       (REF_JITTER1),
        .SS_EN                             (SS_EN),
        .SS_MODE                           (SS_MODE),
        .SS_MOD_PERIOD                     (SS_MOD_PERIOD),
        .CMD_PAUSE_BITS                    (CMD_PAUSE_BITS),
        .CMD_DONE_BIT                      (CMD_DONE_BIT),
        .NUM_CYCLES_LOW_BIT                (NUM_CYCLES_LOW_BIT),
        .NUM_CYCLES_00                     (NUM_CYCLES_00),
        .NUM_CYCLES_01                     (NUM_CYCLES_01),
        .NUM_CYCLES_02                     (NUM_CYCLES_02),
        .NUM_CYCLES_03                     (NUM_CYCLES_03),
        .NUM_CYCLES_04                     (NUM_CYCLES_04),
        .NUM_CYCLES_05                     (NUM_CYCLES_05),
        .NUM_CYCLES_06                     (NUM_CYCLES_06),
        .NUM_CYCLES_07                     (NUM_CYCLES_07),
        .NUM_CYCLES_08                     (NUM_CYCLES_08),
        .NUM_CYCLES_09                     (NUM_CYCLES_09),
        .NUM_CYCLES_10                     (NUM_CYCLES_10),
        .NUM_CYCLES_11                     (NUM_CYCLES_11),
        .NUM_CYCLES_12                     (NUM_CYCLES_12),
        .NUM_CYCLES_13                     (NUM_CYCLES_13),
        .NUM_CYCLES_14                     (NUM_CYCLES_14),
        .NUM_CYCLES_15                     (NUM_CYCLES_15),
        .MCNTRL_PS_ADDR                    (MCNTRL_PS_ADDR),
        .MCNTRL_PS_MASK                    (MCNTRL_PS_MASK),
        .MCNTRL_PS_STATUS_REG_ADDR         (MCNTRL_PS_STATUS_REG_ADDR),
        .MCNTRL_PS_EN_RST                  (MCNTRL_PS_EN_RST),
        .MCNTRL_PS_CMD                     (MCNTRL_PS_CMD),
        .MCNTRL_PS_STATUS_CNTRL            (MCNTRL_PS_STATUS_CNTRL),
        .NUM_XFER_BITS                     (NUM_XFER_BITS),
        .FRAME_WIDTH_BITS                  (FRAME_WIDTH_BITS),
        .FRAME_HEIGHT_BITS                 (FRAME_HEIGHT_BITS),
647
        .MCNTRL_SCANLINE_CHN1_ADDR         (MCNTRL_SCANLINE_CHN1_ADDR),
648 649 650 651 652 653 654 655 656
        .MCNTRL_SCANLINE_CHN3_ADDR         (MCNTRL_SCANLINE_CHN3_ADDR),
        .MCNTRL_SCANLINE_MASK              (MCNTRL_SCANLINE_MASK),
        .MCNTRL_SCANLINE_MODE              (MCNTRL_SCANLINE_MODE),
        .MCNTRL_SCANLINE_STATUS_CNTRL      (MCNTRL_SCANLINE_STATUS_CNTRL),
        .MCNTRL_SCANLINE_STARTADDR         (MCNTRL_SCANLINE_STARTADDR),
        .MCNTRL_SCANLINE_FRAME_FULL_WIDTH  (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
        .MCNTRL_SCANLINE_WINDOW_WH         (MCNTRL_SCANLINE_WINDOW_WH),
        .MCNTRL_SCANLINE_WINDOW_X0Y0       (MCNTRL_SCANLINE_WINDOW_X0Y0),
        .MCNTRL_SCANLINE_WINDOW_STARTXY    (MCNTRL_SCANLINE_WINDOW_STARTXY),
657
        .MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR),
658 659
        .MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR),
        .MCNTRL_SCANLINE_PENDING_CNTR_BITS (MCNTRL_SCANLINE_PENDING_CNTR_BITS),
660
        .MCNTRL_SCANLINE_FRAME_PAGE_RESET  (MCNTRL_SCANLINE_FRAME_PAGE_RESET),
661 662
        .MAX_TILE_WIDTH                    (MAX_TILE_WIDTH),
        .MAX_TILE_HEIGHT                   (MAX_TILE_HEIGHT),
663
        .MCNTRL_TILED_CHN2_ADDR            (MCNTRL_TILED_CHN2_ADDR),
664 665 666 667 668 669 670 671 672
        .MCNTRL_TILED_CHN4_ADDR            (MCNTRL_TILED_CHN4_ADDR),
        .MCNTRL_TILED_MASK                 (MCNTRL_TILED_MASK),
        .MCNTRL_TILED_MODE                 (MCNTRL_TILED_MODE),
        .MCNTRL_TILED_STATUS_CNTRL         (MCNTRL_TILED_STATUS_CNTRL),
        .MCNTRL_TILED_STARTADDR            (MCNTRL_TILED_STARTADDR),
        .MCNTRL_TILED_FRAME_FULL_WIDTH     (MCNTRL_TILED_FRAME_FULL_WIDTH),
        .MCNTRL_TILED_WINDOW_WH            (MCNTRL_TILED_WINDOW_WH),
        .MCNTRL_TILED_WINDOW_X0Y0          (MCNTRL_TILED_WINDOW_X0Y0),
        .MCNTRL_TILED_WINDOW_STARTXY       (MCNTRL_TILED_WINDOW_STARTXY),
673 674
        .MCNTRL_TILED_TILE_WHS             (MCNTRL_TILED_TILE_WHS),
        .MCNTRL_TILED_STATUS_REG_CHN2_ADDR (MCNTRL_TILED_STATUS_REG_CHN2_ADDR),
675 676 677 678 679 680
        .MCNTRL_TILED_STATUS_REG_CHN4_ADDR (MCNTRL_TILED_STATUS_REG_CHN4_ADDR),
        .MCNTRL_TILED_PENDING_CNTR_BITS    (MCNTRL_TILED_PENDING_CNTR_BITS),
        .MCNTRL_TILED_FRAME_PAGE_RESET     (MCNTRL_TILED_FRAME_PAGE_RESET),
        .BUFFER_DEPTH32                    (BUFFER_DEPTH32),
        .MCNTRL_TEST01_ADDR                 (MCNTRL_TEST01_ADDR),
        .MCNTRL_TEST01_MASK                 (MCNTRL_TEST01_MASK),
681 682
        .MCNTRL_TEST01_CHN1_MODE            (MCNTRL_TEST01_CHN1_MODE),
        .MCNTRL_TEST01_CHN1_STATUS_CNTRL    (MCNTRL_TEST01_CHN1_STATUS_CNTRL),
683 684 685 686 687 688
        .MCNTRL_TEST01_CHN2_MODE            (MCNTRL_TEST01_CHN2_MODE),
        .MCNTRL_TEST01_CHN2_STATUS_CNTRL    (MCNTRL_TEST01_CHN2_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN3_MODE            (MCNTRL_TEST01_CHN3_MODE),
        .MCNTRL_TEST01_CHN3_STATUS_CNTRL    (MCNTRL_TEST01_CHN3_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN4_MODE            (MCNTRL_TEST01_CHN4_MODE),
        .MCNTRL_TEST01_CHN4_STATUS_CNTRL    (MCNTRL_TEST01_CHN4_STATUS_CNTRL),
689
        .MCNTRL_TEST01_STATUS_REG_CHN1_ADDR (MCNTRL_TEST01_STATUS_REG_CHN1_ADDR),
690 691
        .MCNTRL_TEST01_STATUS_REG_CHN2_ADDR (MCNTRL_TEST01_STATUS_REG_CHN2_ADDR),
        .MCNTRL_TEST01_STATUS_REG_CHN3_ADDR (MCNTRL_TEST01_STATUS_REG_CHN3_ADDR),
692
        .MCNTRL_TEST01_STATUS_REG_CHN4_ADDR (MCNTRL_TEST01_STATUS_REG_CHN4_ADDR)
693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710
    ) x393_i (
        .SDRST   (SDRST), // DDR3 reset (active low)
        .SDCLK   (SDCLK), // output 
        .SDNCLK  (SDNCLK), // outputread_and_wait(BASEADDR_STATUS)
        .SDA     (SDA[14:0]), // output[14:0] 
        .SDBA    (SDBA[2:0]), // output[2:0] 
        .SDWE    (SDWE), // output
        .SDRAS   (SDRAS), // output
        .SDCAS   (SDCAS), // output
        .SDCKE   (SDCKE), // output
        .SDODT   (SDODT), // output
        .SDD     (SDD[15:0]), // inout[15:0] 
        .SDDML   (SDDML), // inout
        .DQSL    (DQSL), // inout
        .NDQSL   (NDQSL), // inout
        .SDDMU   (SDDMU), // inout
        .DQSU    (DQSU), // inout
        .NDQSU   (NDQSU), // inout
Andrey Filippov's avatar
Andrey Filippov committed
711 712
        .DUMMY_TO_KEEP(DUMMY_TO_KEEP)  // to keep PS7 signals from "optimization"
//      ,.MEMCLK  (MEMCLK)
713
    );
714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754
    // just to simplify extra delays in tri-state memory bus - provide output enable
    wire WRAP_MCLK=x393_i.mclk;
    wire [7:0] WRAP_PHY_DQ_TRI=x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dq_tri[7:0] ;
    wire [7:0] WRAP_PHY_DQS_TRI=x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dqs_tri[7:0] ;    
    //x393_i.mcntrl393_i.mcntrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dq_tri
    //x393_i.mcntrl393_i.mcntrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_dqs_tri
`define USE_DDR3_WRAP 1    
`ifdef USE_DDR3_WRAP
    ddr3_wrap #(
        .ADDRESS_NUMBER     (ADDRESS_NUMBER),
        .TRISTATE_DELAY_CLK (1), // total 2
        .TRISTATE_DELAY     (0),
        .CLK_DELAY          (0),
        .CMDA_DELAY         (0),
        .DQS_IN_DELAY       (0),
        .DQ_IN_DELAY        (0),
        .DQS_OUT_DELAY      (0),
        .DQ_OUT_DELAY       (0)
    ) ddr3_i (
        .mclk    (WRAP_MCLK), // input
        .dq_tri  ({WRAP_PHY_DQ_TRI[4],WRAP_PHY_DQ_TRI[0]}), // input[1:0] 
        .dqs_tri ({WRAP_PHY_DQS_TRI[4],WRAP_PHY_DQS_TRI[0]}), // input[1:0] 
        .SDRST   (SDRST), 
        .SDCLK   (SDCLK), 
        .SDNCLK  (SDNCLK), 
        .SDCKE   (SDCKE), 
        .SDRAS   (SDRAS), 
        .SDCAS   (SDCAS), 
        .SDWE    (SDWE), 
        .SDDMU   (SDDMU),
        .SDDML   (SDDML),
        .SDBA    (SDBA[2:0]),  
        .SDA     (SDA[ADDRESS_NUMBER-1:0]), 
        .SDD     (SDD[15:0]),  
        .DQSU    (DQSU),
        .NDQSU   (NDQSU),
        .DQSL    (DQSL),
        .NDQSL   (NDQSL),
        .SDODT     (SDODT)          // input 
    );
`else
755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940
    ddr3 #(
        .TCK_MIN             (2500), 
        .TJIT_PER            (100),
        .TJIT_CC             (200),
        .TERR_2PER           (147),
        .TERR_3PER           (175),
        .TERR_4PER           (194),
        .TERR_5PER           (209),
        .TERR_6PER           (222),
        .TERR_7PER           (232),
        .TERR_8PER           (241),
        .TERR_9PER           (249),
        .TERR_10PER          (257),
        .TERR_11PER          (263),
        .TERR_12PER          (269),
        .TDS                 (125),
        .TDH                 (150),
        .TDQSQ               (200),
        .TDQSS               (0.25),
        .TDSS                (0.20),
        .TDSH                (0.20),
        .TDQSCK              (400),
        .TQSH                (0.38),
        .TQSL                (0.38),
        .TDIPW               (600),
        .TIPW                (900),
        .TIS                 (350),
        .TIH                 (275),
        .TRAS_MIN            (37500),
        .TRC                 (52500),
        .TRCD                (15000),
        .TRP                 (15000),
        .TXP                 (7500),
        .TCKE                (7500),
        .TAON                (400),
        .TWLS                (325),
        .TWLH                (325),
        .TWLO                (9000),
        .TAA_MIN             (15000),
        .CL_TIME             (15000),
        .TDQSCK_DLLDIS       (400),
        .TRRD                (10000),
        .TFAW                (40000),
        .CL_MIN              (5),
        .CL_MAX              (14),
        .AL_MIN              (0),
        .AL_MAX              (2),
        .WR_MIN              (5),
        .WR_MAX              (16),
        .BL_MIN              (4),
        .BL_MAX              (8),
        .CWL_MIN             (5),
        .CWL_MAX             (10),
        .TCK_MAX             (3300),
        .TCH_AVG_MIN         (0.47),
        .TCL_AVG_MIN         (0.47),
        .TCH_AVG_MAX         (0.53),
        .TCL_AVG_MAX         (0.53),
        .TCH_ABS_MIN         (0.43),
        .TCL_ABS_MIN         (0.43),
        .TCKE_TCK            (3),
        .TAA_MAX             (20000),
        .TQH                 (0.38),
        .TRPRE               (0.90),
        .TRPST               (0.30),
        .TDQSH               (0.45),
        .TDQSL               (0.45),
        .TWPRE               (0.90),
        .TWPST               (0.30),
        .TCCD                (4),
        .TCCD_DG             (2),
        .TRAS_MAX            (60e9),
        .TWR                 (15000),
        .TMRD                (4),
        .TMOD                (15000),
        .TMOD_TCK            (12),
        .TRRD_TCK            (4),
        .TRRD_DG             (3000),
        .TRRD_DG_TCK         (2),
        .TRTP                (7500),
        .TRTP_TCK            (4),
        .TWTR                (7500),
        .TWTR_DG             (3750),
        .TWTR_TCK            (4),
        .TWTR_DG_TCK         (2),
        .TDLLK               (512),
        .TRFC_MIN            (260000),
        .TRFC_MAX            (70200000),
        .TXP_TCK             (3),
        .TXPDLL              (24000),
        .TXPDLL_TCK          (10),
        .TACTPDEN            (1),
        .TPRPDEN             (1),
        .TREFPDEN            (1),
        .TCPDED              (1),
        .TPD_MAX             (70200000),
        .TXPR                (270000),
        .TXPR_TCK            (5),
        .TXS                 (270000),
        .TXS_TCK             (5),
        .TXSDLL              (512),
        .TISXR               (350),
        .TCKSRE              (10000),
        .TCKSRE_TCK          (5),
        .TCKSRX              (10000),
        .TCKSRX_TCK          (5),
        .TCKESR_TCK          (4),
        .TAOF                (0.7),
        .TAONPD              (8500),
        .TAOFPD              (8500),
        .ODTH4               (4),
        .ODTH8               (6),
        .TADC                (0.7),
        .TWLMRD              (40),
        .TWLDQSEN            (25),
        .TWLOE               (2000),
        .DM_BITS             (2),
        .ADDR_BITS           (15),
        .ROW_BITS            (15),
        .COL_BITS            (10),
        .DQ_BITS             (16),
        .DQS_BITS            (2),
        .BA_BITS             (3),
        .MEM_BITS            (10),
        .AP                  (10),
        .BC                  (12),
        .BL_BITS             (3),
        .BO_BITS             (2),
        .CS_BITS             (1),
        .RANKS               (1),
        .RZQ                 (240),
        .PRE_DEF_PAT         (8'hAA),
        .STOP_ON_ERROR       (1),
        .DEBUG               (1),
        .BUS_DELAY           (0),
        .RANDOM_OUT_DELAY    (0),
        .RANDOM_SEED         (31913),
        .RDQSEN_PRE          (2),
        .RDQSEN_PST          (1),
        .RDQS_PRE            (2),
        .RDQS_PST            (1),
        .RDQEN_PRE           (0),
        .RDQEN_PST           (0),
        .WDQS_PRE            (2),
        .WDQS_PST            (1),
        .check_strict_mrbits (1),
        .check_strict_timing (1),
        .feature_pasr        (1),
        .feature_truebl4     (0),
        .feature_odt_hi      (0),
        .PERTCKAVG           (512),
        .LOAD_MODE           (4'b0000),
        .REFRESH             (4'b0001),
        .PRECHARGE           (4'b0010),
        .ACTIVATE            (4'b0011),
        .WRITE               (4'b0100),
        .READ                (4'b0101),
        .ZQ                  (4'b0110),
        .NOP                 (4'b0111),
        .PWR_DOWN            (4'b1000),
        .SELF_REF            (4'b1001),
        .RFF_BITS            (128),
        .RFF_CHUNK           (32),
        .SAME_BANK           (2'd0),
        .DIFF_BANK           (2'd1),
        .DIFF_GROUP          (2'd2),
        .SIMUL_500US         (5),
        .SIMUL_200US         (2)
    ) ddr3_i (
        .rst_n   (SDRST),         // input 
        .ck      (SDCLK),         // input 
        .ck_n    (SDNCLK),        // input 
        .cke     (SDCKE),         // input 
        .cs_n    (1'b0),          // input 
        .ras_n   (SDRAS),         // input 
        .cas_n   (SDCAS),         // input 
        .we_n    (SDWE),          // input 
        .dm_tdqs ({SDDMU,SDDML}), // inout[1:0] 
        .ba      (SDBA[2:0]),     // input[2:0] 
        .addr    (SDA[14:0]),     // input[14:0] 
        .dq      (SDD[15:0]),     // inout[15:0] 
        .dqs     ({DQSU,DQSL}),   // inout[1:0] 
        .dqs_n   ({NDQSU,NDQSL}), // inout[1:0] 
        .tdqs_n  (),              // output[1:0] 
        .odt     (SDODT)          // input 
    );
941
`endif    
942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047
    
// Simulation modules    
simul_axi_master_rdaddr
#(
  .ID_WIDTH(12),
  .ADDRESS_WIDTH(32),
  .LATENCY(AXI_RDADDR_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.5),
  .VALID_DELAY(4.0)
) simul_axi_master_rdaddr_i (
    .clk(CLK),
    .reset(RST),
    .arid_in(ARID_IN[11:0]),
    .araddr_in(ARADDR_IN[31:0]),
    .arlen_in(ARLEN_IN[3:0]),
    .arsize_in(ARSIZE_IN[2:0]),
    .arburst_in(ARBURST_IN[1:0]),
    .arcache_in(4'b0),
    .arprot_in(3'b0), //     .arprot_in(2'b0),
    .arid(arid[11:0]),
    .araddr(araddr[31:0]),
    .arlen(arlen[3:0]),
    .arsize(arsize[2:0]),
    .arburst(arburst[1:0]),
    .arcache(arcache[3:0]),
    .arprot(arprot[2:0]),
    .arvalid(arvalid),
    .arready(arready),
    .set_cmd(AR_SET_CMD),  // latch all other input data at posedge of clock
    .ready(AR_READY)     // command/data FIFO can accept command
);

simul_axi_master_wraddr
#(
  .ID_WIDTH(12),
  .ADDRESS_WIDTH(32),
  .LATENCY(AXI_WRADDR_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.5),
  .VALID_DELAY(4.0)
) simul_axi_master_wraddr_i (
    .clk(CLK),
    .reset(RST),
    .awid_in(AWID_IN[11:0]),
    .awaddr_in(AWADDR_IN[31:0]),
    .awlen_in(AWLEN_IN[3:0]),
    .awsize_in(AWSIZE_IN[2:0]),
    .awburst_in(AWBURST_IN[1:0]),
    .awcache_in(4'b0),
    .awprot_in(3'b0), //.awprot_in(2'b0),
    .awid(awid[11:0]),
    .awaddr(awaddr[31:0]),
    .awlen(awlen[3:0]),
    .awsize(awsize[2:0]),
    .awburst(awburst[1:0]),
    .awcache(awcache[3:0]),
    .awprot(awprot[2:0]),
    .awvalid(awvalid),
    .awready(awready),
    .set_cmd(AW_SET_CMD),  // latch all other input data at posedge of clock
    .ready(AW_READY)     // command/data FIFO can accept command
);

simul_axi_master_wdata
#(
  .ID_WIDTH(12),
  .DATA_WIDTH(32),
  .WSTB_WIDTH(4),
  .LATENCY(AXI_WRDATA_LATENCY),          // minimal delay between inout and output ( 0 - next cycle)
  .DEPTH(8),            // maximal number of commands in FIFO
  .DATA_DELAY(3.2),
  .VALID_DELAY(3.6)
) simul_axi_master_wdata_i (
    .clk(CLK),
    .reset(RST),
    .wid_in(WID_IN[11:0]),
    .wdata_in(WDATA_IN[31:0]),
    .wstrb_in(WSTRB_IN[3:0]),
    .wlast_in(WLAST_IN),
    .wid(wid[11:0]),
    .wdata(wdata[31:0]),
    .wstrb(wstrb[3:0]),
    .wlast(wlast),
    .wvalid(wvalid),
    .wready(wready),
    .set_cmd(W_SET_CMD),  // latch all other input data at posedge of clock
    .ready(W_READY)        // command/data FIFO can accept command
);

simul_axi_slow_ready simul_axi_slow_ready_read_i(
    .clk(CLK),
    .reset(RST), //input         reset,
    .delay(RD_LAG), //input  [3:0]  delay,
    .valid(rvalid), // input         valid,
    .ready(rready)  //output        ready
    );

simul_axi_slow_ready simul_axi_slow_ready_write_resp_i(
    .clk(CLK),
    .reset(RST), //input         reset,
    .delay(B_LAG), //input  [3:0]  delay,
    .valid(bvalid), // input       ADDRESS_NUMBER+2:0  valid,
    .ready(bready)  //output        ready
    );

1048 1049 1050
simul_axi_read #(
    .ADDRESS_WIDTH(SIMUL_AXI_READ_WIDTH)
  ) simul_axi_read_i(
1051 1052 1053 1054
  .clk(CLK),
  .reset(RST),
  .last(rlast),
  .data_stb(rstb),
1055
  .raddr(ARADDR_IN[SIMUL_AXI_READ_WIDTH+1:2]), 
1056 1057
  .rlen(ARLEN_IN),
  .rcmd(AR_SET_CMD),
1058
  .addr_out(SIMUL_AXI_ADDR_W[SIMUL_AXI_READ_WIDTH-1:0]),
1059 1060 1061 1062 1063 1064 1065
  .burst(),     // burst in progress - just debug
  .err_out());  // data last does not match predicted or FIFO over/under run - just debug
    
    //  wire [ 3:0] SIMUL_ADD_ADDR; 
    always @ (posedge CLK) begin
        if      (RST) SIMUL_AXI_FULL <=0;
        else if (rstb) SIMUL_AXI_FULL <=1;
1066 1067 1068 1069 1070 1071
        
        if (RST) begin
              NUM_WORDS_READ <= 0;
        end else if (rstb) begin
            NUM_WORDS_READ <= NUM_WORDS_READ + 1; 
        end    
1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085
        if (rstb) begin
            SIMUL_AXI_ADDR <= SIMUL_AXI_ADDR_W;
            SIMUL_AXI_READ <= rdata;
`ifdef DEBUG_RD_DATA
        $display (" Read data (addr:data): 0x%x:0x%x @%t",SIMUL_AXI_ADDR_W,rdata,$time);
`endif  
            
        end 
        
    end
    
    
// SuppressWarnings VEditor all - these variables are just for viewing, not used anywhere else
  reg DEBUG1, DEBUG2, DEBUG3;
Andrey Filippov's avatar
Andrey Filippov committed
1086 1087
  reg [11:0] GLOBAL_WRITE_ID=0;
  reg [11:0] GLOBAL_READ_ID=0;
1088 1089 1090 1091 1092 1093 1094 1095 1096
  reg [7:0] target_phase=0; // to compare/wait for phase shifter ready
  
   task set_up;
        begin
// set dq /dqs tristate on/off patterns
            axi_set_tristate_patterns;
// set patterns for DM (always 0) and DQS - always the same (may try different for write lev.)
            axi_set_dqs_dqm_patterns;
// prepare all sequences
1097
            set_all_sequences (1,0); // rsel = 1, wsel=0
1098
// prepare write buffer    
1099
            write_block_buf_chn(0,0,256); // fill block memory (channel, page, number)
1100 1101
// set all delays
//#axi_set_delays - from tables, per-pin
1102 1103
`ifdef SET_PER_PIN_DELAYS
            $display("SET_PER_PIN_DELAYS @ %t",$time);
1104 1105
            axi_set_delays; // set all individual delays, aslo runs axi_set_phase()
`else
1106
            $display("SET COMMON DELAYS @ %t",$time);
1107
            axi_set_same_delays(DLY_DQ_IDELAY,DLY_DQ_ODELAY,DLY_DQS_IDELAY,DLY_DQS_ODELAY,DLY_DM_ODELAY,DLY_CMDA_ODELAY);
1108 1109
// set clock phase relative to DDR clk
            axi_set_phase(DLY_PHASE);
1110 1111
`endif            
            
1112 1113 1114
        end
    endtask

1115 1116 1117 1118 1119
// tasks - when tested - move to includes

task test_write_levelling; // SuppressThisWarning VEditor - may be unused
  begin
// Set special values for DQS idelay for write leveling
1120
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // not no interrupt running cycle - delays are changed immediately
1121 1122 1123 1124
        axi_set_dqs_idelay_wlv;
// Set write buffer (from DDR3) WE signal delay for write leveling mode
        axi_set_wbuf_delay(WBUF_DLY_WLV);
        axi_set_dqs_odelay('h80); // 'h80 - inverted, 'h60 - not - 'h80 will cause warnings during simulation
1125
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1126 1127 1128 1129 1130 1131
                        WRITELEV_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        0,                 // input [1:0] page;     // buffer page number
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
                        
1132
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1133 1134 1135
        read_block_buf_chn (0, 0, 32, 1 ); // chn=0, page=0, number of 32-bit words=32, wait_done
//        @ (negedge rstb);
        axi_set_dqs_odelay(DLY_DQS_ODELAY);
1136
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1137 1138 1139 1140 1141
                        WRITELEV_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        1,                 // input [1:0] page;     // buffer page number
                        0,                 // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1142
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1143 1144 1145 1146 1147
        read_block_buf_chn (0, 1, 32, 1 ); // chn=0, page=1, number of 32-bit words=32, wait_done
//    task wait_read_queue_empty; - alternative way to check fo empty read queue
        
//        @ (negedge rstb);
        axi_set_dqs_idelay_nominal;
1148 1149
        axi_set_dqs_odelay_nominal;
//        axi_set_dqs_odelay('h78);
1150 1151 1152 1153 1154 1155
        axi_set_wbuf_delay(WBUF_DLY_DFLT); //DFLT_WBUF_DELAY
   end
endtask

task test_read_pattern; // SuppressThisWarning VEditor - may be unused
    begin  
1156
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1157 1158 1159 1160 1161
                        READ_PATTERN_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        2,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1162
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1163 1164 1165 1166 1167 1168 1169
        read_block_buf_chn (0, 2, 32, 1 ); // chn=0, page=2, number of 32-bit words=32, wait_done
    end
endtask

task test_write_block; // SuppressThisWarning VEditor - may be unused
    begin
//    write_block_buf_chn; // fill block memory - already set in set_up task
1170
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1171 1172 1173 1174 1175 1176
                        WRITE_BLOCK_OFFSET,    // input [9:0] seq_addr; // sequence start address
                        0,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        1,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
// tempoary - for debugging:
1177
//        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1178 1179 1180 1181 1182
    end
endtask

task test_read_block; // SuppressThisWarning VEditor - may be unused
    begin
1183
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1184 1185 1186 1187 1188
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        3,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1189
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1190 1191 1192 1193 1194
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        2,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1195
        schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
1196 1197 1198 1199 1200
                        READ_BLOCK_OFFSET,   // input [9:0] seq_addr; // sequence start address
                        1,                     // input [1:0] page;     // buffer page number
                        0,                     // input       urgent;   // high priority request (only for competion with other channels, wiil not pass in this FIFO)
                        0,                    // input       chn;      // channel buffer to use: 0 - memory read, 1 - memory write
                        `PS_PIO_WAIT_COMPLETE );//  wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
1201
        wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
1202 1203 1204 1205 1206 1207 1208 1209
        read_block_buf_chn (0, 3, 256, 1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
    end
endtask

task test_scanline_write; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input            [1:0] extra_pages;
    input                  wait_done;
1210 1211 1212 1213 1214
    input [15:0]           window_width;
    input [15:0]           window_height;
    input [15:0]           window_left;
    input [15:0]           window_top;
    
1215 1216 1217 1218 1219 1220 1221 1222
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    
    integer       ii;
1223 1224 1225
    integer xfer_size;
    integer pages_per_row;
    integer startx,starty; // temporary - because of the vdt bug with integer ports
1226
    begin
1227
        pages_per_row= (window_width>>NUM_XFER_BITS)+((window_width[NUM_XFER_BITS-1:0]==0)?0:1);
1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258
        $display("====== test_scanline_write: channel=%d, extra_pages=%d,  wait_done=%d @%t",
                                              channel,    extra_pages,     wait_done,   $time);
        case (channel)
            1:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
                end
            3:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 1 and 3 are valid");
                start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
            end
        endcase
        mode=   func_encode_mode_scanline(
                    extra_pages,
                    1, // write_mem,
                    1, // enable
                    0);  // chn_reset
                
        write_contol_register(start_addr+ MCNTRL_SCANLINE_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1259 1260
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
1261 1262 1263 1264 1265 1266 1267 1268
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY,   SCANLINE_STARTX+(SCANLINE_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_MODE,             mode); 
        configure_channel_priority(channel,0);    // lowest priority channel 3
//        enable_memcntrl_channels(16'h000b); // channels 0,1,3 are enabled
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
        for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
// VDT bugs: 1:does not propagate undefined width through ?:, 2: - does not allow to connect it to task integer input, 3: shows integer input width as 1  
1269
            xfer_size= ((pages_per_row>1)?
1270 1271
                (
                    (
1272
                        ((ii % pages_per_row) < (pages_per_row-1))?
1273
                        (1<<NUM_XFER_BITS):
1274
                        (window_width % (1<<NUM_XFER_BITS))
1275 1276
                    )
                ):
1277
                ({16'b0,window_width}));
1278
           $display("########### test_scanline_write block %d: channel=%d, @%t", ii, channel, $time);
1279 1280
           startx=window_left + ((ii % pages_per_row)<<NUM_XFER_BITS);
           starty=window_top + (ii / pages_per_row);
1281 1282 1283
           write_block_scanline_chn(
            channel,
            (ii & 3),
1284 1285 1286
            xfer_size,
            startx, //window_left + ((ii % pages_per_row)<<NUM_XFER_BITS),  // SCANLINE_CUR_X,
            starty); // window_top + (ii / pages_per_row)); // SCANLINE_CUR_Y);\
1287 1288
            
        end
1289
        for (ii=0;ii< (window_height * pages_per_row) ;ii = ii+1) begin // here assuming 1 page per line
1290 1291 1292 1293 1294 1295 1296
            if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
                wait_status_condition (
                    status_address, //MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                    status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                    DEFAULT_STATUS_MODE,
                    (ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
                    'hf << 16,  // mask for the 4-bit page number
1297 1298
                    1, // not equal to
                    (ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
1299
                xfer_size= ((pages_per_row>1)?
1300 1301
                    (
                        (
1302
                            ((ii % pages_per_row) < (pages_per_row-1))?
1303 1304
                        
                         (1<<NUM_XFER_BITS):
1305
                            (window_width % (1<<NUM_XFER_BITS))
1306 1307
                        )
                    ):
1308
                    ({16'b0,window_width}));
1309
                $display("########### test_scanline_write block %d: channel=%d, @%t", ii, channel, $time);
1310 1311 1312
                startx=window_left + ((ii % pages_per_row)<<NUM_XFER_BITS);
                starty=window_top + (ii / pages_per_row);
                
1313 1314 1315
                write_block_scanline_chn(
                    channel,
                    (ii & 3),
1316 1317 1318
                xfer_size,
                startx,  // window_left + ((ii % pages_per_row)<<NUM_XFER_BITS),  // SCANLINE_CUR_X,
                starty); // window_top + (ii / pages_per_row)); // SCANLINE_CUR_Y);
1319 1320 1321 1322 1323 1324 1325 1326 1327 1328
            end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
        if (wait_done) begin
            wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
                2 << STATUS_2LSB_SHFT,  // mask for the 4-bit page number
1329 1330
                0, // equal to
                0); // no need to synchronize sequence number
1331 1332 1333 1334 1335 1336 1337 1338 1339
//     enable_memcntrl_en_dis(channel,0); // disable channel
        end
    end
endtask

task test_scanline_read; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input            [1:0] extra_pages;
    input                  show_data;
1340 1341 1342 1343
    input [15:0]           window_width;
    input [15:0]           window_height;
    input [15:0]           window_left;
    input [15:0]           window_top;
1344 1345 1346 1347 1348 1349 1350
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    integer       ii;
1351 1352 1353
    integer xfer_size;
    integer pages_per_row;
    
1354
    begin
1355
        pages_per_row= (window_width>>NUM_XFER_BITS)+((window_width[NUM_XFER_BITS-1:0]==0)?0:1);
1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387
        $display("====== test_scanline_read: channel=%d, extra_pages=%d,  show_data=%d @%t",
                                             channel,    extra_pages,     show_data,    $time);
        case (channel)
            1:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
                end
            3:  begin
                    start_addr=             MCNTRL_SCANLINE_CHN3_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 1 and 3 are valid");
                start_addr=             MCNTRL_SCANLINE_CHN1_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
            end
        endcase
        mode=   func_encode_mode_scanline(
                    extra_pages,
                    0, // write_mem,
                    1, // enable
                    0);  // chn_reset

   // program to the
        write_contol_register(start_addr + MCNTRL_SCANLINE_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1388 1389
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
1390 1391 1392 1393 1394
        write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY,   SCANLINE_STARTX+(SCANLINE_STARTY<<16));
        write_contol_register(start_addr + MCNTRL_SCANLINE_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
1395 1396
        for (ii=0;ii<(window_height * pages_per_row);ii = ii+1) begin
            xfer_size= ((pages_per_row>1)?
1397 1398
                (
                    (
1399
                        ((ii % pages_per_row) < (pages_per_row-1))?
1400
                        (1<<NUM_XFER_BITS):
1401
                        (window_width % (1<<NUM_XFER_BITS))
1402 1403
                    )
                ):
1404
                ({16'b0,window_width}));
1405 1406 1407 1408 1409 1410
            wait_status_condition (
                status_address, //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                (ii) << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
                'hf << 16,  // mask for the 4-bit page number
1411 1412
                 1, // not equal to
                 (ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
1413
// read block (if needed), for now just sikip  
1414 1415 1416 1417 1418
                if (show_data) begin
                    $display("########### test_scanline_read block %d: channel=%d, @%t", ii, channel, $time);
                    read_block_buf_chn (
                        channel,
                        (ii & 3),
1419
                        xfer_size <<2,
1420
                        1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432
                end
        write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
    end
  end  
endtask

task test_tiled_write; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input                  byte32;
    input                  keep_open;
    input            [1:0] extra_pages;
    input                  wait_done;
1433 1434 1435 1436 1437 1438 1439 1440 1441
    input [15:0]           window_width;
    input [15:0]           window_height;
    input [15:0]           window_left;
    input [15:0]           window_top;
    input [ 7:0]           tile_width;
    input [ 7:0]           tile_height;
    input [ 7:0]           tile_vstep;
    
    
1442 1443 1444 1445 1446 1447 1448
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    integer       ii;
1449 1450 1451 1452
    integer       tiles_per_row;
    integer       tile_rows_per_window;
    integer       tile_size;
    integer startx,starty; // temporary - because of the vdt bug with integer ports
1453
    begin
1454 1455 1456
        tiles_per_row= (window_width/tile_width)+  ((window_width % tile_width==0)?0:1);
        tile_rows_per_window= ((window_height-1)/tile_vstep) + 1;
        tile_size= tile_width*tile_height;
1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488
        $display("====== test_tiled_write: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d,  wait_done=%d @%t",
                                           channel,    byte32,    keep_open,    extra_pages,     wait_done,   $time);
        case (channel)
            2:  begin
                    start_addr=             MCNTRL_TILED_CHN2_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
                end
            4:  begin
                    start_addr=             MCNTRL_TILED_CHN4_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 2 and 4 are valid");
                start_addr=             MCNTRL_TILED_CHN2_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
            end
        endcase
        mode=   func_encode_mode_tiled(
                    byte32,
                    keep_open,
                    extra_pages,
                    1, // write_mem,
                    1, // enable
                    0);  // chn_reset
        write_contol_register(start_addr + MCNTRL_TILED_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1489 1490 1491
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
        
1492
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY,   TILED_STARTX+(TILED_STARTY<<16));
1493
        write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS,         {8'b0,tile_vstep,tile_height,tile_width});//tile_width+(tile_height<<8)+(tile_vstep<<16));
1494 1495 1496 1497 1498 1499
        write_contol_register(start_addr + MCNTRL_TILED_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
    
        for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
1500
            $display("########### test_tiled_write block %d: channel=%d, @%t", ii, channel, $time);
1501 1502
            startx = window_left + ((ii % tiles_per_row) * tile_width);
            starty = window_top + (ii / tile_rows_per_window); // SCANLINE_CUR_Y);\
1503 1504 1505
            write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
                channel, // channel
                (ii & 3),
1506 1507 1508
                tile_size,
                startx, //window_left + ((ii % tiles_per_row) * tile_width),
                starty); //window_top + (ii / tile_rows_per_window)); // SCANLINE_CUR_Y);\
1509 1510
        end
    
1511
        for (ii=0;ii<(tiles_per_row * tile_rows_per_window);ii = ii+1) begin
1512 1513 1514 1515 1516 1517 1518
            if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
                wait_status_condition (
                    status_address, // MCNTRL_TEST01_STATUS_REG_CHN5_ADDR,
                    status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN5_STATUS_CNTRL,
                    DEFAULT_STATUS_MODE,
                    (ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
                    'hf << 16,  // mask for the 4-bit page number
1519 1520
                    1, // not equal to
                    (ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
1521
                $display("########### test_tiled_write block %d: channel=%d, @%t", ii, channel, $time);
1522 1523
                startx = window_left + ((ii % tiles_per_row) * tile_width);
                starty = window_top + (ii / tile_rows_per_window);
1524 1525 1526
                write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
                    channel, // channel
                    (ii & 3),
1527 1528 1529
                    tile_size,
                    startx, // window_left + ((ii % tiles_per_row) * tile_width),
                    starty); // window_top + (ii / tile_rows_per_window)); // SCANLINE_CUR_Y);\
1530 1531 1532 1533 1534 1535 1536 1537 1538 1539
            end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
        if (wait_done) begin
            wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
                2 << STATUS_2LSB_SHFT,  // mask for the 4-bit page number
1540 1541
                0, // equal to
                0); // no need to synchronize sequence number
1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554
//     enable_memcntrl_en_dis(channel,0); // disable channel
        end
    end  
endtask



task test_tiled_read; // SuppressThisWarning VEditor - may be unused
    input            [3:0] channel;
    input                  byte32;
    input                  keep_open;
    input            [1:0] extra_pages;
    input                  show_data;
1555 1556 1557 1558 1559 1560 1561
    input [15:0]           window_width;
    input [15:0]           window_height;
    input [15:0]           window_left;
    input [15:0]           window_top;
    input [ 7:0]           tile_width;
    input [ 7:0]           tile_height;
    input [ 7:0]           tile_vstep;
1562 1563 1564 1565 1566 1567 1568 1569
    
    reg             [29:0] start_addr;
    integer                mode;
    reg [STATUS_DEPTH-1:0] status_address;
    reg             [29:0] status_control_address;
    reg             [29:0] test_mode_address;
    
    integer       ii;
1570 1571 1572 1573
    integer       tiles_per_row;
    integer       tile_rows_per_window;
    integer       tile_size;
    
1574
    begin
1575 1576 1577
        tiles_per_row= (window_width/tile_width)+  ((window_width % tile_width==0)?0:1);
        tile_rows_per_window= ((window_height-1)/tile_vstep) + 1;
        tile_size= tile_width*tile_height;
1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609
        $display("====== test_tiled_read: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d,  show_data=%d @%t",
                                          channel,      byte32,  keep_open,    extra_pages,     show_data,   $time);
        case (channel)
            2:  begin
                    start_addr=             MCNTRL_TILED_CHN2_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
                end
            4:  begin
                    start_addr=             MCNTRL_TILED_CHN4_ADDR;
                    status_address=         MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
                    status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
                    test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
                end
            default: begin
                $display("**** ERROR: Invalid channel, only 2 and 4 are valid");
                start_addr=             MCNTRL_TILED_CHN2_ADDR;
                status_address=         MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
                status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
                test_mode_address=      MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
            end
        endcase
        mode=   func_encode_mode_tiled(
                    byte32,
                    keep_open,
                    extra_pages,
                    0, // write_mem,
                    1, // enable
                    0);  // chn_reset
        write_contol_register(start_addr + MCNTRL_TILED_STARTADDR,        FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) 
        write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
1610 1611 1612
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH,        {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0,      {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
        
1613
        write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY,   TILED_STARTX+(TILED_STARTY<<16));
1614
        write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS,         {8'b0,tile_vstep,tile_height,tile_width});//(tile_height<<8)+(tile_vstep<<16));
1615 1616 1617 1618
        write_contol_register(start_addr + MCNTRL_TILED_MODE,             mode);// set mode register: {extra_pages[1:0],enable,!reset}
        configure_channel_priority(channel,0);    // lowest priority channel 3
        enable_memcntrl_en_dis(channel,1);
        write_contol_register(test_mode_address,            TEST01_START_FRAME);
1619
        for (ii=0;ii<(tiles_per_row * tile_rows_per_window);ii = ii+1) begin
1620 1621 1622 1623 1624 1625
            wait_status_condition (
                status_address, // MCNTRL_TEST01_STATUS_REG_CHN4_ADDR,
                status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL,
                DEFAULT_STATUS_MODE,
                ii << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
                'hf << 16,  // mask for the 4-bit page number
1626 1627
                1, // not equal to
                (ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
1628
                if (show_data) begin 
1629 1630 1631 1632
                    $display("########### test_tiled_read block %d: channel=%d, @%t", ii, channel, $time);
                    read_block_buf_chn (
                        channel,
                        (ii & 3),
1633
                        tile_size <<2,
1634
                        1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647
                end
            write_contol_register(test_mode_address,            TEST01_NEXT_PAGE);
        end
//     enable_memcntrl_en_dis(channel,0); // disable channel
    end  
endtask







1648
task set_all_sequences;
1649 1650
    input rsel;
    input wsel;
1651 1652 1653 1654 1655
        begin
            $display("SET MRS @ %t",$time);    
            set_mrs(1);
            $display("SET REFRESH @ %t",$time);    
            set_refresh(
1656 1657
                T_RFC, // input [ 9:0] t_rfc; // =50 for tCK=2.5ns
                T_REFI); //input [ 7:0] t_refi; // 48/97 for normal, 8 - for simulation
1658 1659 1660 1661 1662 1663 1664 1665
            $display("SET WRITE LEVELING @ %t",$time);    
            set_write_lev(16); // write leveling, 16 times   (full buffer - 128) 
            $display("SET READ PATTERN @ %t",$time);    
            set_read_pattern(8); // 8x2*64 bits, 32x32 bits to read
            $display("SET WRITE BLOCK @ %t",$time);    
            set_write_block(
                3'h5,     // bank
                15'h1234, // row address
1666 1667
                10'h100,   // column address
                wsel
1668 1669 1670 1671 1672 1673
            );
           
            $display("SET READ BLOCK @ %t",$time);    
            set_read_block(
                3'h5,     // bank
                15'h1234, // row address
1674 1675
                10'h100,   // column address
                rsel      // sel
1676 1677 1678
            );
        end
endtask
Andrey Filippov's avatar
Andrey Filippov committed
1679

1680
task write_block_scanline_chn;  // S uppressThisWarning VEditor : may be unused
1681 1682
//    input integer chn; // buffer channel
    input   [3:0] chn; // buffer channel
1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693
    input   [1:0] page;
//    input integer num_words; // number of words to write (will be rounded up to multiple of 16)
    input [NUM_XFER_BITS:0] num_bursts; // number of 8-bursts to write (will be rounded up to multiple of 16)
    input integer startX;
    input integer startY;
    reg    [29:0] start_addr;
    integer num_words;
    begin
//        $display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_words, $time);
        $display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_bursts, $time);
        case (chn)
1694
            0:  start_addr=MCONTR_BUF0_WR_ADDR + (page << 8);
1695
            1:  start_addr=MCONTR_BUF1_WR_ADDR + (page << 8);
1696
            2:  start_addr=MCONTR_BUF2_WR_ADDR + (page << 8);
1697
            3:  start_addr=MCONTR_BUF3_WR_ADDR + (page << 8);
1698
            4:  start_addr=MCONTR_BUF4_WR_ADDR + (page << 8);
1699 1700
            default: begin
                $display("**** ERROR: Invalid channel for write_block_scanline_chn = %d @%t", chn, $time);
1701
                start_addr = MCONTR_BUF0_WR_ADDR+ (page << 8);
1702 1703 1704 1705 1706 1707 1708 1709
            end
        endcase
        num_words=num_bursts << 2;
        write_block_incremtal (start_addr, num_words, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
//        write_block_incremtal (start_addr, num_bursts << 2, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
    end
endtask

1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745
function [6:0] func_encode_mode_tiled;
    input       byte32; // 32-byte columns (0 - 16-byte columns)
    input       keep_open; // for 8 or less rows - do not close page between accesses
    input [1:0] extra_pages; // number of extra pages that need to stay (not to be overwritten) in the buffer
                             // can be used for overlapping tile read access
    input       write_mem;   // write to memory mode (0 - read from memory)
    input       enable;      // enable requests from this channel ( 0 will let current to finish, but not raise want/need)
    input       chn_reset;       // immediately reset al;l the internal circuitry
    begin
        func_encode_mode_tiled={byte32,keep_open,extra_pages,write_mem,enable,~chn_reset};
    end           
endfunction
function [4:0] func_encode_mode_scanline;
    input [1:0] extra_pages; // number of extra pages that need to stay (not to be overwritten) in the buffer
                             // can be used for overlapping tile read access
    input       write_mem;   // write to memory mode (0 - read from memory)
    input       enable;      // enable requests from this channel ( 0 will let current to finish, but not raise want/need)
    input       chn_reset;       // immediately reset al;l the internal circuitry
    begin
        func_encode_mode_scanline={extra_pages,write_mem,enable,~chn_reset};
    end           
endfunction
/*
task enable_memcntrl_en_dis;
    input [3:0] chn;
    input       en;
    begin
        if (en) begin
            ENABLED_CHANNELS = ENABLED_CHANNELS | (1<<chn);
        end else begin
            ENABLED_CHANNELS = ENABLED_CHANNELS & ~(1<<chn);
        end
        write_contol_register(MCONTR_TOP_16BIT_ADDR +  MCONTR_TOP_16BIT_CHN_EN, {16'b0,ENABLED_CHANNELS});
    end
endtask
*/
Andrey Filippov's avatar
Andrey Filippov committed
1746

1747 1748 1749
`include "includes/x393_tasks_mcntrl_en_dis_priority.vh"
`include "includes/x393_tasks_mcntrl_buffers.vh"
`include "includes/x393_tasks_pio_sequences.vh"
1750
`include "includes/x393_tasks_mcntrl_timing.vh" // SuppressThisWarning VEditor - not used
1751 1752
`include "includes/x393_tasks_ps_pio.vh"
`include "includes/x393_tasks_status.vh"
1753
`include "includes/x393_tasks01.vh"
1754
`include "includes/x393_mcontr_encode_cmd.vh"
1755 1756
endmodule