x393.v 87.1 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
/*******************************************************************************
 * Module: x393
 * Date:2015-01-13  
 * Author: andrey     
 * Description: Elphel NC393 camera FPGA top module
 *
 * Copyright (c) 2015 <set up in Preferences-Verilog/VHDL Editor-Templates> .
 * x393.v is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 *  x393.v is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *******************************************************************************/
`timescale 1ns/1ps
`define use200Mhz 1
23
//`define DEBUG_FIFO 1
24
`include "system_defines.vh" 
25
module  x393 #(
26
`include "includes/x393_parameters.vh"
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
)(
    // DDR3 interface
    output                       SDRST, // DDR3 reset (active low)
    output                       SDCLK, // DDR3 clock differential output, positive
    output                       SDNCLK,// DDR3 clock differential output, negative
    output  [ADDRESS_NUMBER-1:0] SDA,   // output address ports (14:0) for 4Gb device
    output                 [2:0] SDBA,  // output bank address ports
    output                       SDWE,  // output WE port
    output                       SDRAS, // output RAS port
    output                       SDCAS, // output CAS port
    output                       SDCKE, // output Clock Enable port
    output                       SDODT, // output ODT port

    inout                 [15:0] SDD,   // DQ  I/O pads
    output                       SDDML, // LDM  I/O pad (actually only output)
    inout                        DQSL,  // LDQS I/O pad
    inout                        NDQSL, // ~LDQS I/O pad
    output                       SDDMU, // UDM  I/O pad (actually only output)
    inout                        DQSU,  // UDQS I/O pad
    inout                        NDQSU,
    output                       DUMMY_TO_KEEP  // to keep PS7 signals from "optimization"
//    ,input                        MEMCLK
);

51 52
//    localparam ADDRESS_NUMBER=15;
//    localparam COLADDR_NUMBER=10;
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94
// Source for reset and clock
   wire    [3:0]     fclk;      // PL Clocks [3:0], output
   wire    [3:0]     frst;      // PL Clocks [3:0], output
   
   
    
// AXI write interface signals
//(* keep = "true" *)
   wire           axi_aclk;    // clock - should be buffered
//   wire           axi_naclk;   // debugging
//   wire           axi_aresetn; // reset, active low
//(* dont_touch = "true" *)
   wire           axi_rst;     // reset, active high
// AXI Write Address
   wire   [31:0]  axi_awaddr;  // AWADDR[31:0], input
   wire           axi_awvalid; // AWVALID, input
   wire           axi_awready; // AWREADY, output
   wire   [11:0]  axi_awid;    // AWID[11:0], input
//   input  [ 1:0] awlock,     // AWLOCK[1:0], input
//   input  [ 3:0] awcache,    // AWCACHE[3:0], input
//   input  [ 2:0] awprot,     // AWPROT[2:0], input
   wire   [ 3:0]  axi_awlen;       // AWLEN[3:0], input
   wire   [ 1:0]  axi_awsize;      // AWSIZE[1:0], input
   wire   [ 1:0]  axi_awburst;     // AWBURST[1:0], input
//   input  [ 3:0] awqos,      // AWQOS[3:0], input
// AXI PS Master GP0: Write Data
   wire   [31:0]  axi_wdata;       // WDATA[31:0], input
   wire           axi_wvalid;      // WVALID, input
   wire           axi_wready;      // WREADY, output
   wire   [11:0]  axi_wid;         // WID[11:0], input
   wire           axi_wlast;       // WLAST, input
   wire   [ 3:0]  axi_wstb;        // WSTRB[3:0], input
// AXI PS Master GP0: Write Responce
   wire           axi_bvalid;      // BVALID, output
   wire           axi_bready;      // BREADY, input
   wire   [11:0]  axi_bid;         // BID[11:0], output
   wire   [ 1:0]  axi_bresp;       // BRESP[1:0], output
   
// BRAM (and other write modules) interface from AXI write
   wire [AXI_WR_ADDR_BITS-1:0] axiwr_pre_awaddr; // same as awaddr_out, early address to decode and return dev_ready
   wire           axiwr_start_burst; // start of write burst, valid pre_awaddr, save externally to control ext. dev_ready multiplexer
   wire           axiwr_dev_ready;   // extrernal combinatorial ready signal, multiplexed from different sources according to pre_awaddr@start_burst
Andrey Filippov's avatar
Andrey Filippov committed
95 96 97
   wire           axiwr_wclk;
   wire  [AXI_WR_ADDR_BITS-1:0] axiwr_waddr;
   wire           axiwr_wen;    // external memory write enable, (internally combined with registered dev_ready
98 99
// SuppressWarnings VEditor unused (yet?) 
   wire    [3:0]  axiwr_bram_wstb; 
Andrey Filippov's avatar
Andrey Filippov committed
100
   wire   [31:0]  axiwr_wdata;
101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128

 // AXI Read Address   
   wire   [31:0]  axi_araddr;  // ARADDR[31:0], input 
   wire           axi_arvalid; // ARVALID, input
   wire           axi_arready; // ARREADY, output
   wire   [11:0]  axi_arid;    // ARID[11:0], input
//   input  [ 1:0] arlock,  // ARLOCK[1:0], input
//   input  [ 3:0] archache,// ARCACHE[3:0], input
//   input  [ 2:0] arprot,  // ARPROT[2:0], input
   wire   [ 3:0]  axi_arlen;   // ARLEN[3:0], input
   wire   [ 1:0]  axi_arsize;  // ARSIZE[1:0], input
   wire   [ 1:0]  axi_arburst; // ARBURST[1:0], input
//   input  [ 3:0] adqos,   // ARQOS[3:0], input
// AXI Read Data
   wire   [31:0]  axi_rdata;   // RDATA[31:0], output
   wire           axi_rvalid;  // RVALID, output
   wire           axi_rready;  // RREADY, input
   wire   [11:0]  axi_rid;     // RID[11:0], output
   wire           axi_rlast;   // RLAST, output
   wire   [ 1:0]  axi_rresp;

// External memory synchronization
   wire [AXI_RD_ADDR_BITS-1:0] axird_pre_araddr; // same as awaddr_out, early address to decode and return dev_ready
   wire           axird_start_burst; // start of read burst, valid pre_araddr, save externally to control ext. dev_ready multiplexer
   wire           axird_dev_ready;   // extrernal combinatorial ready signal, multiplexed from different sources according to pre_araddr@start_burst
// External memory interface   
// SuppressWarnings VEditor unused (yet?) - use mclk 
   wire           axird_bram_rclk;  //      .rclk(aclk),                  // clock for read port
129
   // while only status provides read data, the next signals are not used (relies on axird_pre_araddr, axird_start_burst)
Andrey Filippov's avatar
Andrey Filippov committed
130 131 132 133
   wire  [AXI_RD_ADDR_BITS-1:0] axird_raddr; //   .raddr(read_in_progress?read_address[9:0]:10'h3ff),    // read address
   wire           axird_ren;   //      .ren(bram_reg_re_w) ,      // read port enable
   wire           axird_regen; //   .regen(bram_reg_re_w),        // output register enable
   wire  [31:0]   axird_rdata;  //      .data_out(rdata[31:0]),       // data out
134
//   wire  [31:0]   port0_rdata;  //
135
   wire  [31:0]   status_rdata;  //
136 137
   wire           status_selected;
   wire  [31:0]   mcntrl_axird_rdata; // read data from the memory controller 
138
   
139
   wire           mcntrl_axird_selected; // memory controoler has valid data output on mcntrl_axird_rdata 
140 141 142 143
   reg            status_selected_ren;         // status_selected (set at axird_start_burst) delayed when ren is active
   reg            mcntrl_axird_selected_ren;   // mcntrl_axird_selected (set at axird_start_burst) delayed when ren is active
   reg            status_selected_regen;       // status_selected (set at axird_start_burst) delayed when ren is active, then when regen (normally 2 cycles)
   reg            mcntrl_axird_selected_regen; // mcntrl_axird_selected (set at axird_start_burst) delayed when ren is active, then when regen (normally 2 cycles)
144 145

   wire        mclk;
146 147

   wire [11:0] tmp_debug; 
148
   
149
//   reg    select_port0; // May be used later!
150
   wire axiwr_dev_busy;
151
   wire axird_dev_busy;
152
   
153 154
   assign axird_dev_ready = ~axird_dev_busy; //may combine (AND) multiple sources if needed
   assign axird_dev_busy = 1'b0; // always for now
155 156 157
// Use this later    
//   assign axird_rdata= ({32{status_selected}} & status_rdata[31:0]) | ({32{mcntrl_axird_selected}} & mcntrl_axird_rdata[31:0]);
//Debug with this (to show 'x)   
158 159
//   assign axird_rdata= status_selected?status_rdata[31:0] : (mcntrl_axird_selected? mcntrl_axird_rdata[31:0]:'bx);
   assign axird_rdata= status_selected_regen?status_rdata[31:0] : (mcntrl_axird_selected_regen? mcntrl_axird_rdata[31:0]:'bx);
160
   
161
   assign axiwr_dev_ready = ~axiwr_dev_busy; //may combine (AND) multiple sources if needed
162 163 164 165 166

// Clock and reset from PS
    wire comb_rst=~frst[0] | frst[1];
    reg axi_rst_pre=1'b1;

167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184
// delay status_selected and mcntrl_axird_selected to match data for multiplexing

    always @(posedge axi_rst or posedge axird_bram_rclk) begin
        if      (axi_rst)     status_selected_ren <= 1'b0;
        else if (axird_ren)   status_selected_ren <= status_selected;
        
        if      (axi_rst)     status_selected_regen <= 1'b0;
        else if (axird_regen) status_selected_regen <= status_selected_ren;

        if      (axi_rst)     mcntrl_axird_selected_ren <= 1'b0;
        else if (axird_ren)   mcntrl_axird_selected_ren <=  mcntrl_axird_selected;
        
        if      (axi_rst)     mcntrl_axird_selected_regen <= 1'b0;
        else if (axird_regen) mcntrl_axird_selected_regen <= mcntrl_axird_selected_ren;
    end



185 186 187 188 189
    always @(posedge comb_rst or posedge axi_aclk) begin
        if (comb_rst) axi_rst_pre <= 1'b1;
        else          axi_rst_pre <= 1'b0;
    end
     
190 191
//BUFG bufg_axi_rst_i   (.O(axi_rst),.I(axi_rst_pre));
//BUFG bufg_axi_aclk_i  (.O(axi_aclk),.I(fclk[0]));
192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
   

`ifdef DEBUG_FIFO
        wire    waddr_under, wdata_under, wresp_under; 
        wire    waddr_over, wdata_over, wresp_over;
        reg     waddr_under_r, wdata_under_r, wresp_under_r;
        reg     waddr_over_r, wdata_over_r, wresp_over_r;
        wire    fifo_rst= frst[2];
        wire [3:0]   waddr_wcount; 
        wire [3:0]   waddr_rcount; 
        wire [3:0]   waddr_num_in_fifo; 
        
        wire [3:0]   wdata_wcount; 
        wire [3:0]   wdata_rcount; 
        wire [3:0]   wdata_num_in_fifo; 
        
        wire [3:0]   wresp_wcount; 
        wire [3:0]   wresp_rcount; 
        wire [3:0]   wresp_num_in_fifo; 
        wire [3:0]   wleft;
        wire [3:0]   wlength; // output[3:0] 
        wire [3:0]   wlen_in_dbg; // output[3:0] reg 
        
           
    always @(posedge fifo_rst or posedge axi_aclk) begin
     if (fifo_rst) {waddr_under_r, wdata_under_r, wresp_under_r,waddr_over_r, wdata_over_r, wresp_over_r} <= 0;
     else {waddr_under_r, wdata_under_r, wresp_under_r, waddr_over_r, wdata_over_r, wresp_over_r} <=
          {waddr_under_r, wdata_under_r, wresp_under_r, waddr_over_r, wdata_over_r, wresp_over_r} | 
          {waddr_under,   wdata_under,   wresp_under,   waddr_over,   wdata_over,   wresp_over};
    end         
`endif

Andrey Filippov's avatar
Andrey Filippov committed
224
//TODO: The following is the interface to the frame-based command sequencer (not yet implemnted)        
Andrey Filippov's avatar
Andrey Filippov committed
225 226 227
    wire [AXI_WR_ADDR_BITS-1:0] cseq_waddr;   /// S uppressThisWarning VEditor ******  command sequencer write address (output to command multiplexer)
    wire                        cseq_wr_en;   /// S uppressThisWarning VEditor ****** command sequencer write enable (output to command multiplexer) - keep until cseq_ackn received
    wire                 [31:0] cseq_wdata;   /// S uppressThisWarning VEditor ****** command sequencer write data (output to command multiplexer) 
228
    wire                        cseq_ackn;    /// SuppressThisWarning VEditor ****** ackn to command sequencer, command sequencer should de-assert cseq_wr_en
229
// parallel address/data - where higher bandwidth (single-cycle) is needed        
230 231
    wire [AXI_WR_ADDR_BITS-1:0] par_waddr;    /// SuppressThisWarning VEditor ****** multiplexed address (full, parallel) to slave devices 
    wire                 [31:0] par_data;     /// SuppressThisWarning VEditor ****** multiplexed data (full, parallel) to slave devices 
232

Andrey Filippov's avatar
Andrey Filippov committed
233 234


235 236 237 238 239 240 241
    wire                  [7:0] cmd_root_ad;       // multiplexed byte-wide serialized address/data to salve devices (AL-AH-D0-D1-D2-D3), may contain less cycles 
    wire                        cmd_root_stb;      // strobe marking the first of 1-6 a/d bytes and also data valid for par_waddr and par_data

    wire                  [7:0] status_root_ad;    // Root status byte-wide address/data 
    wire                        status_root_rq;    // Root status request  
    wire                        status_root_start; // Root status packet transfer start (currently with 0 latency from status_root_rq)

242 243 244
    wire                  [7:0] status_mcontr_ad;    // Memory controller status byte-wide address/data 
    wire                        status_mcontr_rq;    // Memory controller status request  
    wire                        status_mcontr_start; // Memory controller status packet transfer start (currently with 0 latency from status_root_rq)
245
// Not yet connected
246 247 248
    wire                  [7:0] status_other_ad;    /// S uppressThisWarning VEditor ****** Other status byte-wide address/data 
    wire                        status_other_rq;    /// S uppressThisWarning VEditor ****** Other status request  
    wire                        status_other_start; /// S =uppressThisWarning VEditor ****** Other status packet transfer start (currently with 0 latency from status_root_rq)
249

250

251 252 253
    wire                  [7:0] status_test01_ad;    // Test module status byte-wide address/data 
    wire                        status_test01_rq;    // Test module status request  
    wire                        status_test01_start; // Test module status packet transfer start (currently with 0 latency from status_root_rq)
254 255


256 257 258 259 260 261 262 263 264
    // Insert register layer if needed
    wire [7:0] cmd_mcontr_ad;
    wire       cmd_mcontr_stb;
    wire [7:0] cmd_test01_ad;
    wire       cmd_test01_stb;


//mcntrl393_test01

265 266 267 268 269 270
    wire                        frame_start_chn1; // input
    wire                        next_page_chn1; // input
    wire                        page_ready_chn1; // output
    wire                        frame_done_chn1; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn1; // output[15:0] 
    wire                        suspend_chn1; // input
271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299
    wire                        frame_start_chn2;  // input
    wire                        next_page_chn2;    // input
    wire                        page_ready_chn2; // output
    wire                        frame_done_chn2; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn2; // output[15:0] 
    wire                        suspend_chn2; // input
    wire                        frame_start_chn3; // input
    wire                        next_page_chn3; // input
    wire                        page_ready_chn3; // output
    wire                        frame_done_chn3; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn3; // output[15:0] 
    wire                        suspend_chn3; // input
    wire                        frame_start_chn4; // input
    wire                        next_page_chn4; // input
    wire                        page_ready_chn4; // output
    wire                        frame_done_chn4; // output
    wire[FRAME_HEIGHT_BITS-1:0] line_unfinished_chn4; // output[15:0]
    wire                        suspend_chn4; // input

    assign cmd_mcontr_ad= cmd_root_ad;
    assign cmd_mcontr_stb=cmd_root_stb;
    assign cmd_test01_ad= cmd_root_ad;
    assign cmd_test01_stb=cmd_root_stb;

// For now - connect status_test01 to status_other, if needed - increase number of multiplexer inputs)
    assign status_other_ad = status_test01_ad;
    assign status_other_rq = status_test01_rq;
    assign status_test01_start = status_other_start;

Andrey Filippov's avatar
Andrey Filippov committed
300 301 302 303 304
// missing command sequencer:
        assign cseq_waddr='bx;  // command sequencer write address (output to command multiplexer)
        assign cseq_wr_en= 0;   // command sequencer write enable (output to command multiplexer) - keep until cseq_ackn received
        assign cseq_wdata='bx;  // command sequencer write data (output to command multiplexer) 

305 306 307 308 309 310

// channel test module
    mcntrl393_test01 #(
        .MCNTRL_TEST01_ADDR                 (MCNTRL_TEST01_ADDR),
        .MCNTRL_TEST01_MASK                 (MCNTRL_TEST01_MASK),
        .FRAME_HEIGHT_BITS                  (FRAME_HEIGHT_BITS),
311 312
        .MCNTRL_TEST01_CHN1_MODE            (MCNTRL_TEST01_CHN1_MODE),
        .MCNTRL_TEST01_CHN1_STATUS_CNTRL    (MCNTRL_TEST01_CHN1_STATUS_CNTRL),
313 314 315 316 317 318
        .MCNTRL_TEST01_CHN2_MODE            (MCNTRL_TEST01_CHN2_MODE),
        .MCNTRL_TEST01_CHN2_STATUS_CNTRL    (MCNTRL_TEST01_CHN2_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN3_MODE            (MCNTRL_TEST01_CHN3_MODE),
        .MCNTRL_TEST01_CHN3_STATUS_CNTRL    (MCNTRL_TEST01_CHN3_STATUS_CNTRL),
        .MCNTRL_TEST01_CHN4_MODE            (MCNTRL_TEST01_CHN4_MODE),
        .MCNTRL_TEST01_CHN4_STATUS_CNTRL    (MCNTRL_TEST01_CHN4_STATUS_CNTRL),
319
        .MCNTRL_TEST01_STATUS_REG_CHN1_ADDR (MCNTRL_TEST01_STATUS_REG_CHN1_ADDR),
320 321
        .MCNTRL_TEST01_STATUS_REG_CHN2_ADDR (MCNTRL_TEST01_STATUS_REG_CHN2_ADDR),
        .MCNTRL_TEST01_STATUS_REG_CHN3_ADDR (MCNTRL_TEST01_STATUS_REG_CHN3_ADDR),
322
        .MCNTRL_TEST01_STATUS_REG_CHN4_ADDR (MCNTRL_TEST01_STATUS_REG_CHN4_ADDR)
323 324 325 326 327 328 329 330
    ) mcntrl393_test01_i (
        .rst(axi_rst), // input
        .mclk                 (mclk), // input
        .cmd_ad               (cmd_test01_ad), // input[7:0] 
        .cmd_stb              (cmd_test01_stb), // input
        .status_ad            (status_test01_ad), // output[7:0] 
        .status_rq            (status_test01_rq), // output
        .status_start         (status_test01_start), // input
331 332 333 334 335 336
        .frame_start_chn1     (frame_start_chn1), // output
        .next_page_chn1       (next_page_chn1), // output
        .page_ready_chn1      (page_ready_chn1), // input
        .frame_done_chn1      (frame_done_chn1), // input
        .line_unfinished_chn1 (line_unfinished_chn1), // input[15:0] 
        .suspend_chn1         (suspend_chn1), // output
337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353
        .frame_start_chn2     (frame_start_chn2), // output
        .next_page_chn2       (next_page_chn2), // output
        .page_ready_chn2      (page_ready_chn2), // input
        .frame_done_chn2      (frame_done_chn2), // input
        .line_unfinished_chn2 (line_unfinished_chn2), // input[15:0] 
        .suspend_chn2         (suspend_chn2), // output
        .frame_start_chn3     (frame_start_chn3), // output
        .next_page_chn3       (next_page_chn3), // output
        .page_ready_chn3      (page_ready_chn3), // input
        .frame_done_chn3      (frame_done_chn3), // input
        .line_unfinished_chn3 (line_unfinished_chn3), // input[15:0] 
        .suspend_chn3         (suspend_chn3), // output
        .frame_start_chn4     (frame_start_chn4), // output
        .next_page_chn4       (next_page_chn4), // output
        .page_ready_chn4      (page_ready_chn4), // input
        .frame_done_chn4      (frame_done_chn4), // input
        .line_unfinished_chn4 (line_unfinished_chn4), // input[15:0] 
354
        .suspend_chn4         (suspend_chn4) // output
355 356 357
    );

// Interface to channels to read/write memory (including 4 page BRAM buffers)
358

359 360 361 362
    cmd_mux #(
        .AXI_WR_ADDR_BITS  (AXI_WR_ADDR_BITS),
        .CONTROL_ADDR      (CONTROL_ADDR),
        .CONTROL_ADDR_MASK (CONTROL_ADDR_MASK),
363
// TODO: Put correct numcycles!        
364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381
        .NUM_CYCLES_LOW_BIT(NUM_CYCLES_LOW_BIT),
        .NUM_CYCLES_00     (NUM_CYCLES_00),
        .NUM_CYCLES_01     (NUM_CYCLES_01),
        .NUM_CYCLES_02     (NUM_CYCLES_02),
        .NUM_CYCLES_03     (NUM_CYCLES_03),
        .NUM_CYCLES_04     (NUM_CYCLES_04),
        .NUM_CYCLES_05     (NUM_CYCLES_05),
        .NUM_CYCLES_06     (NUM_CYCLES_06),
        .NUM_CYCLES_07     (NUM_CYCLES_07),
        .NUM_CYCLES_08     (NUM_CYCLES_08),
        .NUM_CYCLES_09     (NUM_CYCLES_09),
        .NUM_CYCLES_10     (NUM_CYCLES_10),
        .NUM_CYCLES_11     (NUM_CYCLES_11),
        .NUM_CYCLES_12     (NUM_CYCLES_12),
        .NUM_CYCLES_13     (NUM_CYCLES_13),
        .NUM_CYCLES_14     (NUM_CYCLES_14),
        .NUM_CYCLES_15     (NUM_CYCLES_15)
    ) cmd_mux_i (
Andrey Filippov's avatar
Andrey Filippov committed
382
        .axi_clk      (axiwr_wclk), // input
383 384 385 386
        .mclk         (mclk), // input
        .rst          (axi_rst), // input
        .pre_waddr    (axiwr_pre_awaddr[AXI_WR_ADDR_BITS-1:0]), // input[12:0] 
        .start_wburst (axiwr_start_burst), // input
Andrey Filippov's avatar
Andrey Filippov committed
387 388 389
        .waddr        (axiwr_waddr[AXI_WR_ADDR_BITS-1:0]), // input[12:0] 
        .wr_en        (axiwr_wen), // input
        .wdata        (axiwr_wdata[31:0]), // input[31:0] 
390
        .busy         (axiwr_dev_busy), // output // assign axiwr_dev_ready = ~axiwr_dev_busy; //may combine (AND) multiple sources if needed
391
//TODO: The following is the interface to the command sequencer (not yet implemnted)        
392 393 394 395
        .cseq_waddr   (cseq_waddr), // input[12:0] 
        .cseq_wr_en   (cseq_wr_en), // input
        .cseq_wdata   (cseq_wdata), // input[31:0] 
        .cseq_ackn    (cseq_ackn), // output
396
// parallel address/data - where higher bandwidth (single-cycle) is needed        
397 398 399
        .par_waddr    (par_waddr), // output[12:0] 
        .par_data     (par_data), // output[31:0]
        // registers may be inserted before byte_ad and ad_stb  
400 401
        .byte_ad      (cmd_root_ad), // output[7:0] 
        .ad_stb       (cmd_root_stb) // output
402 403
    );

404
    status_read #(
405 406 407 408
        .STATUS_ADDR      (STATUS_ADDR),
        .STATUS_ADDR_MASK (STATUS_ADDR_MASK),
        .AXI_RD_ADDR_BITS (AXI_RD_ADDR_BITS),
        .STATUS_DEPTH     (STATUS_DEPTH)
409 410 411
    ) status_read_i (
        .rst              (axi_rst), // input
        .clk              (mclk), // input
412 413 414 415 416 417 418 419
        .axi_clk          (axird_bram_rclk), // input == axi_aclk
        .axird_pre_araddr (axird_pre_araddr), // input[7:0] 
        .axird_start_burst(axird_start_burst), // input
        .axird_raddr      (axird_raddr[STATUS_DEPTH-1:0]), // input[7:0] 
        .axird_ren        (axird_ren), // input
        .axird_regen      (axird_regen), // input
        .axird_rdata      (status_rdata), // output[31:0] 
        .axird_selected   (status_selected), // output
420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438
        .ad               (status_root_ad), // input[7:0] 
        .rq               (status_root_rq), // input
        .start            (status_root_start) // output
    );

// mux status info from the memory controller and other modules    
    status_router2 status_router2_top_i (
        .rst       (axi_rst), // input
        .clk       (mclk), // input
        .db_in0    (status_mcontr_ad), // input[7:0] 
        .rq_in0    (status_mcontr_rq), // input
        .start_in0 (status_mcontr_start), // output
        .db_in1    (status_other_ad), // input[7:0] 
        .rq_in1    (status_other_rq), // input
        .start_in1 (status_other_start), // output
        .db_out    (status_root_ad), // output[7:0] 
        .rq_out    (status_root_rq), // output
        .start_out (status_root_start) // input
    );
439

Andrey Filippov's avatar
Andrey Filippov committed
440 441 442 443 444 445
    /* Instance template for module mcntrl393 */
    mcntrl393 #(
        .MCONTR_WR_MASK                    (MCONTR_WR_MASK),
        .MCONTR_RD_MASK                    (MCONTR_RD_MASK),
        .MCONTR_CMD_WR_ADDR                (MCONTR_CMD_WR_ADDR),
        .MCONTR_BUF0_RD_ADDR               (MCONTR_BUF0_RD_ADDR),
446 447
        .MCONTR_BUF0_WR_ADDR               (MCONTR_BUF0_WR_ADDR),
        .MCONTR_BUF1_RD_ADDR               (MCONTR_BUF1_RD_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
448 449
        .MCONTR_BUF1_WR_ADDR               (MCONTR_BUF1_WR_ADDR),
        .MCONTR_BUF2_RD_ADDR               (MCONTR_BUF2_RD_ADDR),
450 451
        .MCONTR_BUF2_WR_ADDR               (MCONTR_BUF2_WR_ADDR),
        .MCONTR_BUF3_RD_ADDR               (MCONTR_BUF3_RD_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
452 453
        .MCONTR_BUF3_WR_ADDR               (MCONTR_BUF3_WR_ADDR),
        .MCONTR_BUF4_RD_ADDR               (MCONTR_BUF4_RD_ADDR),
454
        .MCONTR_BUF4_WR_ADDR               (MCONTR_BUF4_WR_ADDR),
455 456
        .AXI_WR_ADDR_BITS                  (AXI_WR_ADDR_BITS),
        .AXI_RD_ADDR_BITS                  (AXI_RD_ADDR_BITS),
457
       
Andrey Filippov's avatar
Andrey Filippov committed
458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536
        .DLY_LD                            (DLY_LD),
        .DLY_LD_MASK                       (DLY_LD_MASK),
        .MCONTR_PHY_0BIT_ADDR              (MCONTR_PHY_0BIT_ADDR),
        .MCONTR_PHY_0BIT_ADDR_MASK         (MCONTR_PHY_0BIT_ADDR_MASK),
        .MCONTR_PHY_0BIT_DLY_SET           (MCONTR_PHY_0BIT_DLY_SET),
        .MCONTR_PHY_0BIT_CMDA_EN           (MCONTR_PHY_0BIT_CMDA_EN),
        .MCONTR_PHY_0BIT_SDRST_ACT         (MCONTR_PHY_0BIT_SDRST_ACT),
        .MCONTR_PHY_0BIT_CKE_EN            (MCONTR_PHY_0BIT_CKE_EN),
        .MCONTR_PHY_0BIT_DCI_RST           (MCONTR_PHY_0BIT_DCI_RST),
        .MCONTR_PHY_0BIT_DLY_RST           (MCONTR_PHY_0BIT_DLY_RST),
        .MCONTR_TOP_0BIT_ADDR              (MCONTR_TOP_0BIT_ADDR),
        .MCONTR_TOP_0BIT_ADDR_MASK         (MCONTR_TOP_0BIT_ADDR_MASK),
        .MCONTR_TOP_0BIT_MCONTR_EN         (MCONTR_TOP_0BIT_MCONTR_EN),
        .MCONTR_TOP_0BIT_REFRESH_EN        (MCONTR_TOP_0BIT_REFRESH_EN),
        .MCONTR_PHY_16BIT_ADDR             (MCONTR_PHY_16BIT_ADDR),
        .MCONTR_PHY_16BIT_ADDR_MASK        (MCONTR_PHY_16BIT_ADDR_MASK),
        .MCONTR_PHY_16BIT_PATTERNS         (MCONTR_PHY_16BIT_PATTERNS),
        .MCONTR_PHY_16BIT_PATTERNS_TRI     (MCONTR_PHY_16BIT_PATTERNS_TRI),
        .MCONTR_PHY_16BIT_WBUF_DELAY       (MCONTR_PHY_16BIT_WBUF_DELAY),
        .MCONTR_PHY_16BIT_EXTRA            (MCONTR_PHY_16BIT_EXTRA),
        .MCONTR_PHY_STATUS_CNTRL           (MCONTR_PHY_STATUS_CNTRL),
        .MCONTR_ARBIT_ADDR                 (MCONTR_ARBIT_ADDR),
        .MCONTR_ARBIT_ADDR_MASK            (MCONTR_ARBIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_ADDR             (MCONTR_TOP_16BIT_ADDR),
        .MCONTR_TOP_16BIT_ADDR_MASK        (MCONTR_TOP_16BIT_ADDR_MASK),
        .MCONTR_TOP_16BIT_CHN_EN           (MCONTR_TOP_16BIT_CHN_EN),
        .MCONTR_TOP_16BIT_REFRESH_PERIOD   (MCONTR_TOP_16BIT_REFRESH_PERIOD),
        .MCONTR_TOP_16BIT_REFRESH_ADDRESS  (MCONTR_TOP_16BIT_REFRESH_ADDRESS),
        .MCONTR_TOP_16BIT_STATUS_CNTRL     (MCONTR_TOP_16BIT_STATUS_CNTRL),
        .MCONTR_PHY_STATUS_REG_ADDR        (MCONTR_PHY_STATUS_REG_ADDR),
        .MCONTR_TOP_STATUS_REG_ADDR        (MCONTR_TOP_STATUS_REG_ADDR),
        .CHNBUF_READ_LATENCY               (CHNBUF_READ_LATENCY),
        .DFLT_DQS_PATTERN                  (DFLT_DQS_PATTERN),
        .DFLT_DQM_PATTERN                  (DFLT_DQM_PATTERN),
        .DFLT_DQ_TRI_ON_PATTERN            (DFLT_DQ_TRI_ON_PATTERN),
        .DFLT_DQ_TRI_OFF_PATTERN           (DFLT_DQ_TRI_OFF_PATTERN),
        .DFLT_DQS_TRI_ON_PATTERN           (DFLT_DQS_TRI_ON_PATTERN),
        .DFLT_DQS_TRI_OFF_PATTERN          (DFLT_DQS_TRI_OFF_PATTERN),
        .DFLT_WBUF_DELAY                   (DFLT_WBUF_DELAY),
        .DFLT_INV_CLK_DIV                  (DFLT_INV_CLK_DIV),
        .DFLT_CHN_EN                       (DFLT_CHN_EN),
        .DFLT_REFRESH_ADDR                 (DFLT_REFRESH_ADDR),
        .DFLT_REFRESH_PERIOD               (DFLT_REFRESH_PERIOD),
        .ADDRESS_NUMBER                    (ADDRESS_NUMBER),
        .COLADDR_NUMBER                    (COLADDR_NUMBER),
        .PHASE_WIDTH                       (PHASE_WIDTH),
        .SLEW_DQ                           (SLEW_DQ),
        .SLEW_DQS                          (SLEW_DQS),
        .SLEW_CMDA                         (SLEW_CMDA),
        .SLEW_CLK                          (SLEW_CLK),
        .IBUF_LOW_PWR                      (IBUF_LOW_PWR),
        .REFCLK_FREQUENCY                  (REFCLK_FREQUENCY),
        .HIGH_PERFORMANCE_MODE             (HIGH_PERFORMANCE_MODE),
        .CLKIN_PERIOD                      (CLKIN_PERIOD),
        .CLKFBOUT_MULT                     (CLKFBOUT_MULT),
        .CLKFBOUT_MULT_REF                 (CLKFBOUT_MULT_REF),
        .CLKFBOUT_DIV_REF                  (CLKFBOUT_DIV_REF),
        .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
        .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
        .SDCLK_PHASE                       (SDCLK_PHASE),
        .CLK_PHASE                         (CLK_PHASE),
        .CLK_DIV_PHASE                     (CLK_DIV_PHASE),
        .MCLK_PHASE                        (MCLK_PHASE),
        .REF_JITTER1                       (REF_JITTER1),
        .SS_EN                             (SS_EN),
        .SS_MODE                           (SS_MODE),
        .SS_MOD_PERIOD                     (SS_MOD_PERIOD),
        .CMD_PAUSE_BITS                    (CMD_PAUSE_BITS),
        .CMD_DONE_BIT                      (CMD_DONE_BIT),
        
        .MCNTRL_PS_ADDR                    (MCNTRL_PS_ADDR),
        .MCNTRL_PS_MASK                    (MCNTRL_PS_MASK),
        .MCNTRL_PS_STATUS_REG_ADDR         (MCNTRL_PS_STATUS_REG_ADDR),
        .MCNTRL_PS_EN_RST                  (MCNTRL_PS_EN_RST),
        .MCNTRL_PS_CMD                     (MCNTRL_PS_CMD),
        .MCNTRL_PS_STATUS_CNTRL            (MCNTRL_PS_STATUS_CNTRL),
        .NUM_XFER_BITS                     (NUM_XFER_BITS),
        .FRAME_WIDTH_BITS                  (FRAME_WIDTH_BITS),
        .FRAME_HEIGHT_BITS                 (FRAME_HEIGHT_BITS),
537
        .MCNTRL_SCANLINE_CHN1_ADDR         (MCNTRL_SCANLINE_CHN1_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
538 539 540 541 542 543 544 545 546
        .MCNTRL_SCANLINE_CHN3_ADDR         (MCNTRL_SCANLINE_CHN3_ADDR),
        .MCNTRL_SCANLINE_MASK              (MCNTRL_SCANLINE_MASK),
        .MCNTRL_SCANLINE_MODE              (MCNTRL_SCANLINE_MODE),
        .MCNTRL_SCANLINE_STATUS_CNTRL      (MCNTRL_SCANLINE_STATUS_CNTRL),
        .MCNTRL_SCANLINE_STARTADDR         (MCNTRL_SCANLINE_STARTADDR),
        .MCNTRL_SCANLINE_FRAME_FULL_WIDTH  (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
        .MCNTRL_SCANLINE_WINDOW_WH         (MCNTRL_SCANLINE_WINDOW_WH),
        .MCNTRL_SCANLINE_WINDOW_X0Y0       (MCNTRL_SCANLINE_WINDOW_X0Y0),
        .MCNTRL_SCANLINE_WINDOW_STARTXY    (MCNTRL_SCANLINE_WINDOW_STARTXY),
547
        .MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR),
548
        .MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR   (MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
549
        .MCNTRL_SCANLINE_PENDING_CNTR_BITS (MCNTRL_SCANLINE_PENDING_CNTR_BITS),
550
        .MCNTRL_SCANLINE_FRAME_PAGE_RESET  (MCNTRL_SCANLINE_FRAME_PAGE_RESET),
Andrey Filippov's avatar
Andrey Filippov committed
551 552
        .MAX_TILE_WIDTH                    (MAX_TILE_WIDTH),
        .MAX_TILE_HEIGHT                   (MAX_TILE_HEIGHT),
553
        .MCNTRL_TILED_CHN2_ADDR            (MCNTRL_TILED_CHN2_ADDR),
554
        .MCNTRL_TILED_CHN4_ADDR            (MCNTRL_TILED_CHN4_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
555 556 557 558 559 560 561 562
        .MCNTRL_TILED_MASK                 (MCNTRL_TILED_MASK),
        .MCNTRL_TILED_MODE                 (MCNTRL_TILED_MODE),
        .MCNTRL_TILED_STATUS_CNTRL         (MCNTRL_TILED_STATUS_CNTRL),
        .MCNTRL_TILED_STARTADDR            (MCNTRL_TILED_STARTADDR),
        .MCNTRL_TILED_FRAME_FULL_WIDTH     (MCNTRL_TILED_FRAME_FULL_WIDTH),
        .MCNTRL_TILED_WINDOW_WH            (MCNTRL_TILED_WINDOW_WH),
        .MCNTRL_TILED_WINDOW_X0Y0          (MCNTRL_TILED_WINDOW_X0Y0),
        .MCNTRL_TILED_WINDOW_STARTXY       (MCNTRL_TILED_WINDOW_STARTXY),
563
        .MCNTRL_TILED_TILE_WHS             (MCNTRL_TILED_TILE_WHS),
564
        .MCNTRL_TILED_STATUS_REG_CHN2_ADDR (MCNTRL_TILED_STATUS_REG_CHN2_ADDR),
565
        .MCNTRL_TILED_STATUS_REG_CHN4_ADDR (MCNTRL_TILED_STATUS_REG_CHN4_ADDR),
Andrey Filippov's avatar
Andrey Filippov committed
566
        .MCNTRL_TILED_PENDING_CNTR_BITS    (MCNTRL_TILED_PENDING_CNTR_BITS),
567 568
        .MCNTRL_TILED_FRAME_PAGE_RESET     (MCNTRL_TILED_FRAME_PAGE_RESET),
        .BUFFER_DEPTH32                    (BUFFER_DEPTH32)
Andrey Filippov's avatar
Andrey Filippov committed
569 570 571 572 573 574 575 576 577
    ) mcntrl393_i (
        .rst_in               (axi_rst), // input
        .clk_in               (axi_aclk), // input
        .mclk                 (mclk), // output
        .cmd_ad               (cmd_mcontr_ad), // input[7:0] 
        .cmd_stb              (cmd_mcontr_stb), // input
        .status_ad            (status_mcontr_ad[7:0]), // output[7:0]
        .status_rq            (status_mcontr_rq),   // input request to send status downstream
        .status_start         (status_mcontr_start), // Acknowledge of the first status packet byte (address)
578
        
579
        .axi_clk              (axird_bram_rclk), // axi_aclk), // input - same?
Andrey Filippov's avatar
Andrey Filippov committed
580 581 582 583 584
        .axiwr_pre_awaddr     (axiwr_pre_awaddr), // input[12:0] 
        .axiwr_start_burst    (axiwr_start_burst), // input
        .axiwr_waddr          (axiwr_waddr[BUFFER_DEPTH32-1:0]), // input[9:0] 
        .axiwr_wen            (axiwr_wen), // input
        .axiwr_data           (axiwr_wdata), // input[31:0] 
585
        
Andrey Filippov's avatar
Andrey Filippov committed
586 587 588 589 590
        .axird_pre_araddr     (axird_pre_araddr), // input[12:0] 
        .axird_start_burst    (axird_start_burst), // input
        .axird_raddr          (axird_raddr[BUFFER_DEPTH32-1:0]), // input[9:0] 
        .axird_ren            (axird_ren), // input
        .axird_regen          (axird_regen), // input
591 592
        .axird_rdata          (mcntrl_axird_rdata), // output[31:0]
        .axird_selected       (mcntrl_axird_selected), // output 
Andrey Filippov's avatar
Andrey Filippov committed
593
 //TODO:        
594 595 596 597 598 599
        .frame_start_chn1     (frame_start_chn1), // input
        .next_page_chn1       (next_page_chn1), // input
        .page_ready_chn1      (page_ready_chn1), // output
        .frame_done_chn1      (frame_done_chn1), // output
        .line_unfinished_chn1 (line_unfinished_chn1), // output[15:0] 
        .suspend_chn1         (suspend_chn1), // input
Andrey Filippov's avatar
Andrey Filippov committed
600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617
        .frame_start_chn2     (frame_start_chn2), // input
        .next_page_chn2       (next_page_chn2), // input
        .page_ready_chn2      (page_ready_chn2), // output
        .frame_done_chn2      (frame_done_chn2), // output
        .line_unfinished_chn2 (line_unfinished_chn2), // output[15:0] 
        .suspend_chn2         (suspend_chn2), // input
        .frame_start_chn3     (frame_start_chn3), // input
        .next_page_chn3       (next_page_chn3), // input
        .page_ready_chn3      (page_ready_chn3), // output
        .frame_done_chn3      (frame_done_chn3), // output
        .line_unfinished_chn3 (line_unfinished_chn3), // output[15:0] 
        .suspend_chn3         (suspend_chn3), // input
        .frame_start_chn4     (frame_start_chn4), // input
        .next_page_chn4       (next_page_chn4), // input
        .page_ready_chn4      (page_ready_chn4), // output
        .frame_done_chn4      (frame_done_chn4), // output
        .line_unfinished_chn4 (line_unfinished_chn4), // output[15:0]
        .suspend_chn4         (suspend_chn4), // input
618

Andrey Filippov's avatar
Andrey Filippov committed
619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636
        .SDRST                (SDRST), // output
        .SDCLK                (SDCLK), // output
        .SDNCLK               (SDNCLK), // output
        .SDA                  (SDA), // output[14:0] 
        .SDBA                 (SDBA), // output[2:0] 
        .SDWE                 (SDWE), // output
        .SDRAS                (SDRAS), // output
        .SDCAS                (SDCAS), // output
        .SDCKE                (SDCKE), // output
        .SDODT                (SDODT), // output
        .SDD                  (SDD), // inout[15:0] 
        .SDDML                (SDDML), // output
        .DQSL                 (DQSL), // inout
        .NDQSL                (NDQSL), // inout
        .SDDMU                (SDDMU), // output
        .DQSU                 (DQSU), // inout
        .NDQSU                (NDQSU), // inout
        .tmp_debug            (tmp_debug) // output[11:0] 
637
    );
638 639 640

//MEMCLK
wire [63:0] gpio_in;
641 642 643
assign gpio_in= {52'h0,tmp_debug};
/*
{
644 645 646 647 648 649 650 651 652 653 654 655 656
frst[3]?{
16'b0,
    1'b1,              // 1
    1'b0, //MEMCLK,            // 1/0? - external clock
    1'b0,              //
    1'b0,              // 
    
    frst[1],           // 0 (follows)
    fclk[1:0],         // 2'bXX (toggle)
    axird_dev_busy,    // 0

    4'b0,              // 4'b0
    
657
    tmp_debug[11:8],   // 4'b0
658 659 660 661 662 663 664 665 666 667 668
    
    tmp_debug[7:4],    // 4'b0111 -> 4'bx00x
                       //    dly_addr[1],        0
                       //    dly_addr[0],        0
                       //    clkin_stopped_mmcm, 0 
                       //    clkfb_stopped_mmcm, 0
    tmp_debug[3:0],     // 4'b1100 -> 4'bxx00
                       //    ddr_rst, 1 1 4000609c -> 0 , 40006098 -> 1
                       //    rst_in,  0 0
                       //    dci_rst, 0 1
                       //    dly_rst  0 1
669 670 671 672 673
    4'h0,                   
//    phy_locked_mmcm,   //  1 1
//    phy_locked_pll,    //  1 1
//    phy_dci_ready,     //  1 0
//    phy_dly_ready,     //  1 0
674
    
675 676 677 678 679
    4'h0                   
//    locked_mmcm,       //  1 1
//    locked_pll,        //  1 1
//    dci_ready,         //  1 0
//    dly_ready         //  1 0
680 681
                       
    }:{
682
    
683 684 685 686 687 688 689 690 691 692 693 694 695 696
        waddr_wcount[3:0], 
        waddr_rcount[3:0], 
        waddr_num_in_fifo[3:0], 
        
        wdata_wcount[3:0], 
        wdata_rcount[3:0], 
        wdata_num_in_fifo[3:0], 
        
        wresp_wcount[3:0], 
        wresp_rcount[3:0], 
        wresp_num_in_fifo[3:0],
        wleft[3:0],
        wlength[3:0], 
        wlen_in_dbg[3:0] 
697
       
698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713
    },
    
    
    //ps_out[7:4],       // 4'b0 input[7:0] 4'b0
    
    //ps_out[3:0],       // 4'b0 input[7:0] 4'b0
    1'b0,
    waddr_under_r,
    wdata_under_r,
    wresp_under_r,
    
    1'b0, 
    waddr_over_r,
    wdata_over_r,
    wresp_over_r, // ???
     
714 715 716
    1'b0, // run_busy, // input // 0 
    1'b0, //locked, // input   // 1
    1'b0, // ps_rdy, // input   // 1
717 718 719 720 721 722 723
    axi_arready,       // 1
    
    axi_awready,       // 1
    axi_wready,        // 1  - sometimes gets stuck with 0 (axi_awready==1) ? TODO: Add timeout 
    fifo_rst,   // fclk[0],          // 0/1 
    axi_rst_pre //axi_rst            // 0
};
724
*/
725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749
    axibram_write #(
        .ADDRESS_BITS(AXI_WR_ADDR_BITS)
    ) axibram_write_i (  //SuppressThisWarning ISExst Output port <bram_wstb> of the instance <axibram_write_i> is unconnected or connected to loadless signal.
        .aclk        (axi_aclk), // input
        .rst         (axi_rst), // input
        .awaddr      (axi_awaddr[31:0]), // input[31:0] 
        .awvalid     (axi_awvalid), // input
        .awready     (axi_awready), // output
        .awid        (axi_awid[11:0]), // input[11:0] 
        .awlen       (axi_awlen[3:0]), // input[3:0] 
        .awsize      (axi_awsize[1:0]), // input[1:0] 
        .awburst     (axi_awburst[1:0]), // input[1:0] 
        .wdata       (axi_wdata[31:0]), // input[31:0] 
        .wvalid      (axi_wvalid), // input
        .wready      (axi_wready), // output
        .wid         (axi_wid[11:0]), // input[11:0] 
        .wlast       (axi_wlast), // input
        .wstb        (axi_wstb[3:0]), // input[3:0] 
        .bvalid      (axi_bvalid), // output
        .bready      (axi_bready), // input
        .bid         (axi_bid[11:0]), // output[11:0] 
        .bresp       (axi_bresp[1:0]), // output[1:0] 
        .pre_awaddr  (axiwr_pre_awaddr[AXI_WR_ADDR_BITS-1:0]), // output[9:0] 
        .start_burst (axiwr_start_burst), // output
        .dev_ready   (axiwr_dev_ready), // input
Andrey Filippov's avatar
Andrey Filippov committed
750 751 752
        .bram_wclk   (axiwr_wclk), // output
        .bram_waddr  (axiwr_waddr[AXI_WR_ADDR_BITS-1:0]), // output[9:0] 
        .bram_wen    (axiwr_wen), // output
753
        .bram_wstb   (axiwr_bram_wstb[3:0]), // output[3:0] //SuppressThisWarning ISExst Assignment to axiwr_bram_wstb ignored, since the identifier is never used
Andrey Filippov's avatar
Andrey Filippov committed
754
        .bram_wdata  (axiwr_wdata[31:0]) // output[31:0]
755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800
`ifdef DEBUG_FIFO
        ,
        .waddr_under (waddr_under), // output
        .wdata_under (wdata_under), // output
        .wresp_under (wresp_under), // output
        .waddr_over  (waddr_over),  // output
        .wdata_over  (wdata_over),  // output
        .wresp_over  (wresp_over),   // output
        .waddr_wcount(waddr_wcount), // output[3:0] 
        .waddr_rcount(waddr_rcount), // output[3:0] 
        .waddr_num_in_fifo(waddr_num_in_fifo), // output[3:0] 
        .wdata_wcount(wdata_wcount), // output[3:0] 
        .wdata_rcount(wdata_rcount), // output[3:0] 
        .wdata_num_in_fifo(wdata_num_in_fifo), // output[3:0] 
        .wresp_wcount(wresp_wcount), // output[3:0] 
        .wresp_rcount(wresp_rcount), // output[3:0] 
        .wresp_num_in_fifo(wresp_num_in_fifo), // output[3:0]
        .wleft       (wleft[3:0]),
        .wlength     (wlength[3:0]), // output[3:0] 
        .wlen_in_dbg (wlen_in_dbg[3:0]) // output[3:0] reg 
                 
`endif         
    );

    /* Instance template for module axibram_read */
    axibram_read #(
        .ADDRESS_BITS(AXI_RD_ADDR_BITS)
    ) axibram_read_i ( //SuppressThisWarning ISExst Output port <bram_rclk> of the instance <axibram_read_i> is unconnected or connected to loadless signal.
        .aclk        (axi_aclk), // input
        .rst         (axi_rst), // input
        .araddr      (axi_araddr[31:0]), // input[31:0] 
        .arvalid     (axi_arvalid), // input
        .arready     (axi_arready), // output
        .arid        (axi_arid[11:0]), // input[11:0] 
        .arlen       (axi_arlen[3:0]), // input[3:0] 
        .arsize      (axi_arsize[1:0]), // input[1:0] 
        .arburst     (axi_arburst[1:0]), // input[1:0] 
        .rdata       (axi_rdata[31:0]), // output[31:0] 
        .rvalid      (axi_rvalid), // output reg 
        .rready      (axi_rready), // input
        .rid         (axi_rid), // output[11:0] reg 
        .rlast       (axi_rlast), // output reg 
        .rresp       (axi_rresp[1:0]), // output[1:0] 
        .pre_araddr  (axird_pre_araddr[AXI_RD_ADDR_BITS-1:0]), // output[9:0] 
        .start_burst (axird_start_burst), // output
        .dev_ready   (axird_dev_ready), // input
801
        .bram_rclk   (axird_bram_rclk), // output //S uppressThisWarning ISExst Assignment to axird_bram_rclk ignored, since the identifier is never used
Andrey Filippov's avatar
Andrey Filippov committed
802 803 804 805
        .bram_raddr  (axird_raddr[AXI_RD_ADDR_BITS-1:0]), // output[9:0] 
        .bram_ren    (axird_ren), // output
        .bram_regen  (axird_regen), // output
        .bram_rdata  (axird_rdata) // input[31:0] 
806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551
    );

assign DUMMY_TO_KEEP = 1'b0; // dbg_toggle[0];

  PS7 ps7_i (
 // EMIO interface
 // CAN interface
    .EMIOCAN0PHYTX(),            // CAN 0 TX, output
    .EMIOCAN0PHYRX(),            // CAN 0 RX, input
    .EMIOCAN1PHYTX(),            // Can 1 TX, output
    .EMIOCAN1PHYRX(),            // CAN 1 RX, input
 // GMII 0
    .EMIOENET0GMIICRS(),         // GMII 0 Carrier sense, input
    .EMIOENET0GMIICOL(),         // GMII 0 Collision detect, input
    .EMIOENET0EXTINTIN(),        // GMII 0 Controller Interrupt input, input
    // GMII 0 TX signals
    .EMIOENET0GMIITXCLK(),       // GMII 0 TX clock, input
    .EMIOENET0GMIITXD(),         // GMII 0 Tx Data[7:0], output
    .EMIOENET0GMIITXEN(),        // GMII 0 Tx En, output
    .EMIOENET0GMIITXER(),        // GMII 0 Tx Err, output
    // GMII 0 TX timestamp signals
    .EMIOENET0SOFTX(),           // GMII 0 Tx Tx Start-of-Frame, output
    .EMIOENET0PTPDELAYREQTX(),   // GMII 0 Tx PTP delay req frame detected, output
    .EMIOENET0PTPPDELAYREQTX(),  // GMII 0 Tx PTP peer delay frame detect, output
    .EMIOENET0PTPPDELAYRESPTX(), // GMII 0 Tx PTP pear delay response frame detected, output
    .EMIOENET0PTPSYNCFRAMETX(),  // GMII 0 Tx PTP sync frame detected, output
    // GMII 0 RX signals
    .EMIOENET0GMIIRXCLK(),       // GMII 0 Rx Clock, input
    .EMIOENET0GMIIRXD(),         // GMII 0 Rx Data (7:0), input
    .EMIOENET0GMIIRXDV(),        // GMII 0 Rx Data valid, input
    .EMIOENET0GMIIRXER(),        // GMII 0 Rx Error, input
    // GMII 0 RX timestamp signals
    .EMIOENET0SOFRX(),           // GMII 0 Rx Start of Frame, output
    .EMIOENET0PTPDELAYREQRX(),   // GMII 0 Rx PTP delay req frame detected
    .EMIOENET0PTPPDELAYREQRX(),  // GMII 0 Rx PTP peer delay frame detected, output
    .EMIOENET0PTPPDELAYRESPRX(), // GMII 0 Rx PTP peer delay responce frame detected, output
    .EMIOENET0PTPSYNCFRAMERX(),  // GMII 0 Rx PTP sync frame detected, output
    // MDIO 0
    .EMIOENET0MDIOMDC(),         // MDIO 0 MD clock output, output
    .EMIOENET0MDIOO(),           // MDIO 0 MD data output, output
    .EMIOENET0MDIOTN(),          // MDIO 0 MD data 3-state, output
    .EMIOENET0MDIOI(),           // MDIO 0 MD data input, input

 // GMII 1
    .EMIOENET1GMIICRS(),         // GMII 1 Carrier sense, input
    .EMIOENET1GMIICOL(),         // GMII 1 Collision detect, input
    .EMIOENET1EXTINTIN(),        // GMII 1 Controller Interrupt input, input
    // GMII 1 TX signals
    .EMIOENET1GMIITXCLK(),       // GMII 1 TX clock, input
    .EMIOENET1GMIITXD(),         // GMII 1 Tx Data[7:0], output
    .EMIOENET1GMIITXEN(),        // GMII 1 Tx En, output
    .EMIOENET1GMIITXER(),        // GMII 1 Tx Err, output
    // GMII 1 TX timestamp signals
    .EMIOENET1SOFTX(),           // GMII 1 Tx Tx Start-of-Frame, output
    .EMIOENET1PTPDELAYREQTX(),   // GMII 1 Tx PTP delay req frame detected, output
    .EMIOENET1PTPPDELAYREQTX(),  // GMII 1 Tx PTP peer delay frame detect, output
    .EMIOENET1PTPPDELAYRESPTX(), // GMII 1 Tx PTP pear delay response frame detected, output
    .EMIOENET1PTPSYNCFRAMETX(),  // GMII 1 Tx PTP sync frame detected, output
    // GMII 1 RX signals
    .EMIOENET1GMIIRXCLK(),       // GMII 1 Rx Clock, input
    .EMIOENET1GMIIRXD(),         // GMII 1 Rx Data (7:0), input
    .EMIOENET1GMIIRXDV(),        // GMII 1 Rx Data valid, input
    .EMIOENET1GMIIRXER(),        // GMII 1 Rx Error, input
    // GMII 1 RX timestamp signals
    .EMIOENET1SOFRX(),           // GMII 1 Rx Start of Frame, output
    .EMIOENET1PTPDELAYREQRX(),   // GMII 1 Rx PTP delay req frame detected
    .EMIOENET1PTPPDELAYREQRX(),  // GMII 1 Rx PTP peer delay frame detected, output
    .EMIOENET1PTPPDELAYRESPRX(), // GMII 1 Rx PTP peer delay responce frame detected, output
    .EMIOENET1PTPSYNCFRAMERX(),  // GMII 1 Rx PTP sync frame detected, output
    // MDIO 1
    .EMIOENET1MDIOMDC(),         // MDIO 1 MD clock output, output
    .EMIOENET1MDIOO(),           // MDIO 1 MD data output, output
    .EMIOENET1MDIOTN(),          // MDIO 1 MD data 3-state, output
    .EMIOENET1MDIOI(),           // MDIO 1 MD data input, input
  // EMIO GPIO
    .EMIOGPIOO(),                // EMIO GPIO Data out[63:0], output
    .EMIOGPIOI(gpio_in[63:0]),   // EMIO GPIO Data in[63:0], input
    .EMIOGPIOTN(),               // EMIO GPIO OutputEnable[63:0], output
  // EMIO I2C 0  
    .EMIOI2C0SCLO(),             // I2C 0 SCL OUT, output // manual says input
    .EMIOI2C0SCLI(),             // I2C 0 SCL IN,  input  // manual says output
    .EMIOI2C0SCLTN(),            // I2C 0 SCL EN,  output // manual says input 
    .EMIOI2C0SDAO(),             // I2C 0 SDA OUT, output // manual says input
    .EMIOI2C0SDAI(),             // I2C 0 SDA IN,  input  // manual says output
    .EMIOI2C0SDATN(),            // I2C 0 SDA EN,  output // manual says input
  // EMIO I2C 1  
    .EMIOI2C1SCLO(),             // I2C 1 SCL OUT, output // manual says input
    .EMIOI2C1SCLI(),             // I2C 1 SCL IN,  input  // manual says output
    .EMIOI2C1SCLTN(),            // I2C 1 SCL EN,  output // manual says input 
    .EMIOI2C1SDAO(),             // I2C 1 SDA OUT, output // manual says input
    .EMIOI2C1SDAI(),             // I2C 1 SDA IN,  input  // manual says output
    .EMIOI2C1SDATN(),            // I2C 1 SDA EN,  output // manual says input
// JTAG
    .EMIOPJTAGTCK(),             // JTAG TCK, input
    .EMIOPJTAGTMS(),             // JTAG TMS, input
    .EMIOPJTAGTDI(),             // JTAG TDI, input
    .EMIOPJTAGTDO(),             // JTAG TDO, output
    .EMIOPJTAGTDTN(),            // JTAG TDO OE, output
 // SDIO 0  
    .EMIOSDIO0CLKFB(),           // SDIO 0 Clock feedback, input
    .EMIOSDIO0CLK(),             // SDIO 0 Clock, output
    .EMIOSDIO0CMDI(),            // SDIO 0 Command in, input
    .EMIOSDIO0CMDO(),            // SDIO 0 Command out, output
    .EMIOSDIO0CMDTN(),           // SDIO 0 command OE, output
    .EMIOSDIO0DATAI(),           // SDIO 0 Data in [3:0], input
    .EMIOSDIO0DATAO(),           // SDIO 0 Data out [3:0], output
    .EMIOSDIO0DATATN(),          // SDIO 0 Data OE [3:0], output
    .EMIOSDIO0CDN(),             // SDIO 0 Card detect, input
    .EMIOSDIO0WP(),              // SDIO 0 Write protect, input
    .EMIOSDIO0BUSPOW(),          // SDIO 0 Power control, output
    .EMIOSDIO0LED(),             // SDIO 0 LED control, output
    .EMIOSDIO0BUSVOLT(),         // SDIO 0 Bus voltage [2:0], output
 // SDIO 1  
    .EMIOSDIO1CLKFB(),           // SDIO 1 Clock feedback, input
    .EMIOSDIO1CLK(),             // SDIO 1 Clock, output
    .EMIOSDIO1CMDI(),            // SDIO 1 Command in, input
    .EMIOSDIO1CMDO(),            // SDIO 1 Command out, output
    .EMIOSDIO1CMDTN(),           // SDIO 1 command OE, output
    .EMIOSDIO1DATAI(),           // SDIO 1 Data in [3:0], input
    .EMIOSDIO1DATAO(),           // SDIO 1 Data out [3:0], output
    .EMIOSDIO1DATATN(),          // SDIO 1 Data OE [3:0], output
    .EMIOSDIO1CDN(),             // SDIO 1 Card detect, input
    .EMIOSDIO1WP(),              // SDIO 1 Write protect, input
    .EMIOSDIO1BUSPOW(),          // SDIO 1 Power control, output
    .EMIOSDIO1LED(),             // SDIO 1 LED control, output
    .EMIOSDIO1BUSVOLT(),         // SDIO 1 Bus voltage [2:0], output
  // SPI 0    
    .EMIOSPI0SCLKI(),            // SPI 0 CLK in , input
    .EMIOSPI0SCLKO(),            // SPI 0 CLK out, output
    .EMIOSPI0SCLKTN(),           // SPI 0 CLK OE, output
    .EMIOSPI0SI(),               // SPI 0 MOSI in , input
    .EMIOSPI0MO(),               // SPI 0 MOSI out , output
    .EMIOSPI0MOTN(),             // SPI 0 MOSI OE, output
    .EMIOSPI0MI(),               // SPI 0 MISO in, input
    .EMIOSPI0SO(),               // SPI 0 MISO out, output
    .EMIOSPI0STN(),              // SPI 0 MISO OE, output
    .EMIOSPI0SSIN(),             // SPI 0 Slave select 0 in, input
    .EMIOSPI0SSON(),             // SPI 0 Slave select [2:0] out, output
    .EMIOSPI0SSNTN(),            // SPI 0 Slave select OE, output
  // SPI 1    
    .EMIOSPI1SCLKI(),            // SPI 1 CLK in , input
    .EMIOSPI1SCLKO(),            // SPI 1 CLK out, output
    .EMIOSPI1SCLKTN(),           // SPI 1 CLK OE, output
    .EMIOSPI1SI(),               // SPI 1 MOSI in , input
    .EMIOSPI1MO(),               // SPI 1 MOSI out , output
    .EMIOSPI1MOTN(),             // SPI 1 MOSI OE, output
    .EMIOSPI1MI(),               // SPI 1 MISO in, input
    .EMIOSPI1SO(),               // SPI 1 MISO out, output
    .EMIOSPI1STN(),              // SPI 1 MISO OE, output
    .EMIOSPI1SSIN(),             // SPI 1 Slave select 0 in, input
    .EMIOSPI1SSON(),             // SPI 1 Slave select [2:0] out, output
    .EMIOSPI1SSNTN(),            // SPI 1 Slave select OE, output
// TPIU signals (Trace)    
    .EMIOTRACECTL(),             // Trace CTL, output
    .EMIOTRACEDATA(),            // Trace Data[31:0], output
    .EMIOTRACECLK(),             // Trace CLK, input
// Timers/counters    
    .EMIOTTC0CLKI(),             // Counter/Timer 0 clock in [2:0], input
    .EMIOTTC0WAVEO(),            // Counter/Timer 0 wave out[2:0], output
    .EMIOTTC1CLKI(),             // Counter/Timer 1 clock in [2:0], input
    .EMIOTTC1WAVEO(),            // Counter/Timer 1 wave out[2:0], output
 //UART 0
    .EMIOUART0TX(),              // UART 0 Transmit, output
    .EMIOUART0RX(),              // UART 0 Receive, input
    .EMIOUART0CTSN(),            // UART 0 Clear To Send, input
    .EMIOUART0RTSN(),            // UART 0 Ready to Send, output
    .EMIOUART0DSRN(),            // UART 0 Data Set Ready , input
    .EMIOUART0DCDN(),            // UART 0 Data Carrier Detect, input
    .EMIOUART0RIN(),             // UART 0 Ring Indicator, input
    .EMIOUART0DTRN(),            // UART 0 Data Terminal Ready, output
 //UART 1
    .EMIOUART1TX(),              // UART 1 Transmit, output
    .EMIOUART1RX(),              // UART 1 Receive, input
    .EMIOUART1CTSN(),            // UART 1 Clear To Send, input
    .EMIOUART1RTSN(),            // UART 1 Ready to Send, output
    .EMIOUART1DSRN(),            // UART 1 Data Set Ready , input
    .EMIOUART1DCDN(),            // UART 1 Data Carrier Detect, input
    .EMIOUART1RIN(),             // UART 1 Ring Indicator, input
    .EMIOUART1DTRN(),            // UART 1 Data Terminal Ready, output
 // USB 0    
    .EMIOUSB0PORTINDCTL(),       // USB 0 Port Indicator [1:0], output 
    .EMIOUSB0VBUSPWRFAULT(),     // USB 0 Power Fault, input
    .EMIOUSB0VBUSPWRSELECT(),    // USB 0 Power Select, output
 // USB 1    
    .EMIOUSB1PORTINDCTL(),       // USB 1 Port Indicator [1:0], output 
    .EMIOUSB1VBUSPWRFAULT(),     // USB 1 Power Fault, input
    .EMIOUSB1VBUSPWRSELECT(),    // USB 1 Power Select, output
 // Watchdog Timer    
    .EMIOWDTCLKI(),              // Watchdog Timer Clock in, input
    .EMIOWDTRSTO(),              // Watchdog Timer Reset out, output
 // DMAC 0  
    .DMA0ACLK(),                 // DMAC 0 Clock, input
    .DMA0DRVALID(),              // DMAC 0 DMA Request Valid, input
    .DMA0DRLAST(),               // DMAC 0 DMA Request Last, input
    .DMA0DRTYPE(),               // DMAC 0 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
    .DMA0DRREADY(),              // DMAC 0 DMA Request Ready, output
    .DMA0DAVALID(),              // DMAC 0 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
    .DMA0DAREADY(),              // DMAC 0 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
    .DMA0DATYPE(),               // DMAC 0 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
    .DMA0RSTN(),                 // DMAC 0 RESET output (reserved, do not use), output
 // DMAC 1 
    .DMA1ACLK(),                 // DMAC 1 Clock, input
    .DMA1DRVALID(),              // DMAC 1 DMA Request Valid, input
    .DMA1DRLAST(),               // DMAC 1 DMA Request Last, input
    .DMA1DRTYPE(),               // DMAC 1 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
    .DMA1DRREADY(),              // DMAC 1 DMA Request Ready, output
    .DMA1DAVALID(),              // DMAC 1 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
    .DMA1DAREADY(),              // DMAC 1 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
    .DMA1DATYPE(),               // DMAC 1 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
    .DMA1RSTN(),                 // DMAC 1 RESET output (reserved, do not use), output
 // DMAC 2  
    .DMA2ACLK(),                 // DMAC 2 Clock, input
    .DMA2DRVALID(),              // DMAC 2 DMA Request Valid, input
    .DMA2DRLAST(),               // DMAC 2 DMA Request Last, input
    .DMA2DRTYPE(),               // DMAC 2 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
    .DMA2DRREADY(),              // DMAC 2 DMA Request Ready, output
    .DMA2DAVALID(),              // DMAC 2 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
    .DMA2DAREADY(),              // DMAC 2 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
    .DMA2DATYPE(),               // DMAC 2 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
    .DMA2RSTN(),                 // DMAC 2 RESET output (reserved, do not use), output
 // DMAC 3  
    .DMA3ACLK(),                 // DMAC 3 Clock, input
    .DMA3DRVALID(),              // DMAC 3 DMA Request Valid, input
    .DMA3DRLAST(),               // DMAC 3 DMA Request Last, input
    .DMA3DRTYPE(),               // DMAC 3 DMA Request Type [1:0] ()single/burst/ackn flush/reserved), input
    .DMA3DRREADY(),              // DMAC 3 DMA Request Ready, output
    .DMA3DAVALID(),              // DMAC 3 DMA Acknowledge Valid (DA_TYPE[1:0] valid), output
    .DMA3DAREADY(),              // DMAC 3 DMA Acknowledge (peripheral can accept DA_TYPE[1:0]), input
    .DMA3DATYPE(),               // DMAC 3 DMA Ackbowledge TYpe (completed single AXI, completed burst AXI, flush request), output
    .DMA3RSTN(),                 // DMAC 3 RESET output (reserved, do not use), output
 // Interrupt signals
    .IRQF2P(),                   // Interrupts, OL to PS [19:0], input
    .IRQP2F(),                   // Interrupts, OL to PS [28:0], output
 // Event Signals
    .EVENTEVENTI(),              // EVENT Wake up one or both CPU from WFE state, input
    .EVENTEVENTO(),              // EVENT Asserted when one of the COUs executed SEV instruction, output
    .EVENTSTANDBYWFE(),          // EVENT CPU standby mode [1:0], asserted when CPU is waiting for an event, output
    .EVENTSTANDBYWFI(),          // EVENT CPU standby mode [1:0], asserted when CPU is waiting for an interrupt, output
 // PL Resets and clocks
    .FCLKCLK(fclk[3:0]),         // PL Clocks [3:0], output
    .FCLKCLKTRIGN(),             // PL Clock Throttle Control [3:0], input
    .FCLKRESETN(frst[3:0]),      // PL General purpose user reset [3:0], output (active low)
// Debug signals
    .FTMTP2FDEBUG(),             // Debug General purpose debug output [31:0], output
    .FTMTF2PDEBUG(),             // Debug General purpose debug input [31:0], input
    .FTMTP2FTRIG(),              // Debug Trigger PS to PL [3:0], output
    .FTMTP2FTRIGACK(),           // Debug Trigger PS to PL acknowledge[3:0], input
    .FTMTF2PTRIG(),              // Debug Trigger PL to PS [3:0], input
    .FTMTF2PTRIGACK(),           // Debug Trigger PL to PS acknowledge[3:0], output
    .FTMDTRACEINCLOCK(),         // Debug Trace PL to PS Clock, input
    .FTMDTRACEINVALID(),         // Debug Trace PL to PS Clock, data&id valid, input
    .FTMDTRACEINDATA(),          // Debug Trace PL to PS data [31:0], input
    .FTMDTRACEINATID(),          // Debug Trace PL to PS ID [3:0], input
// DDR Urgent
    .DDRARB(),                   // DDR Urgent[3:0], input
    
// SRAM interrupt (on rising edge)
    .EMIOSRAMINTIN(),             // SRAM interrupt #50 shared with NAND busy, input
// AXI interfaces
    .FPGAIDLEN(1'b1),             //Idle PL AXI interfaces (active low), input
// AXI PS Master GP0    
// AXI PS Master GP0: Clock, Reset
    .MAXIGP0ACLK(axi_aclk),       // AXI PS Master GP0 Clock , input
//    .MAXIGP0ACLK(fclk[0]),       // AXI PS Master GP0 Clock , input
//      .MAXIGP0ACLK(~fclk[0]),       // AXI PS Master GP0 Clock , input
//      .MAXIGP0ACLK(axi_naclk),       // AXI PS Master GP0 Clock , input
    //
    .MAXIGP0ARESETN(),            // AXI PS Master GP0 Reset, output
// AXI PS Master GP0: Read Address    
    .MAXIGP0ARADDR  (axi_araddr[31:0]), // AXI PS Master GP0 ARADDR[31:0], output  
    .MAXIGP0ARVALID (axi_arvalid),     // AXI PS Master GP0 ARVALID, output
    .MAXIGP0ARREADY (axi_arready),     // AXI PS Master GP0 ARREADY, input
    .MAXIGP0ARID    (axi_arid[11:0]),     // AXI PS Master GP0 ARID[11:0], output
    .MAXIGP0ARLOCK   (),  // AXI PS Master GP0 ARLOCK[1:0], output
    .MAXIGP0ARCACHE  (),// AXI PS Master GP0 ARCACHE[3:0], output
    .MAXIGP0ARPROT(),  // AXI PS Master GP0 ARPROT[2:0], output
    .MAXIGP0ARLEN   (axi_arlen[3:0]),    // AXI PS Master GP0 ARLEN[3:0], output
    .MAXIGP0ARSIZE  (axi_arsize[1:0]),  // AXI PS Master GP0 ARSIZE[1:0], output
    .MAXIGP0ARBURST (axi_arburst[1:0]),// AXI PS Master GP0 ARBURST[1:0], output
    .MAXIGP0ARQOS    (),    // AXI PS Master GP0 ARQOS[3:0], output
// AXI PS Master GP0: Read Data
    .MAXIGP0RDATA   (axi_rdata[31:0]),   // AXI PS Master GP0 RDATA[31:0], input
    .MAXIGP0RVALID  (axi_rvalid),       // AXI PS Master GP0 RVALID, input
    .MAXIGP0RREADY  (axi_rready),       // AXI PS Master GP0 RREADY, output
    .MAXIGP0RID     (axi_rid[11:0]),       // AXI PS Master GP0 RID[11:0], input
    .MAXIGP0RLAST   (axi_rlast),         // AXI PS Master GP0 RLAST, input
    .MAXIGP0RRESP   (axi_rresp[1:0]),    // AXI PS Master GP0 RRESP[1:0], input
    
// AXI PS Master GP0: Write Address    
    .MAXIGP0AWADDR  (axi_awaddr[31:0]), // AXI PS Master GP0 AWADDR[31:0], output
    .MAXIGP0AWVALID (axi_awvalid),     // AXI PS Master GP0 AWVALID, output
    .MAXIGP0AWREADY (axi_awready),     // AXI PS Master GP0 AWREADY, input
    .MAXIGP0AWID    (axi_awid[11:0]),     // AXI PS Master GP0 AWID[11:0], output
    .MAXIGP0AWLOCK   (),  // AXI PS Master GP0 AWLOCK[1:0], output
    .MAXIGP0AWCACHE  (),// AXI PS Master GP0 AWCACHE[3:0], output
    .MAXIGP0AWPROT   (),  // AXI PS Master GP0 AWPROT[2:0], output
    .MAXIGP0AWLEN   (axi_awlen[3:0]),    // AXI PS Master GP0 AWLEN[3:0], output
    .MAXIGP0AWSIZE  (axi_awsize[1:0]),  // AXI PS Master GP0 AWSIZE[1:0], output
    .MAXIGP0AWBURST (axi_awburst[1:0]),// AXI PS Master GP0 AWBURST[1:0], output
    .MAXIGP0AWQOS    (),          // AXI PS Master GP0 AWQOS[3:0], output
// AXI PS Master GP0: Write Data
    .MAXIGP0WDATA   (axi_wdata[31:0]),   // AXI PS Master GP0 WDATA[31:0], output
    .MAXIGP0WVALID  (axi_wvalid),       // AXI PS Master GP0 WVALID, output
    .MAXIGP0WREADY  (axi_wready),       // AXI PS Master GP0 WREADY, input
    .MAXIGP0WID     (axi_wid[11:0]),       // AXI PS Master GP0 WID[11:0], output
    .MAXIGP0WLAST   (axi_wlast),         // AXI PS Master GP0 WLAST, output
    .MAXIGP0WSTRB   (axi_wstb[3:0]),    // AXI PS Master GP0 WSTRB[3:0], output
// AXI PS Master GP0: Write Responce
    .MAXIGP0BVALID  (axi_bvalid),       // AXI PS Master GP0 BVALID, input
    .MAXIGP0BREADY  (axi_bready),       // AXI PS Master GP0 BREADY, output
    .MAXIGP0BID     (axi_bid[11:0]),       // AXI PS Master GP0 BID[11:0], input
    .MAXIGP0BRESP   (axi_bresp[1:0]),    // AXI PS Master GP0 BRESP[1:0], input

// AXI PS Master GP1    
// AXI PS Master GP1: Clock, Reset
    .MAXIGP1ACLK(),              // AXI PS Master GP1 Clock , input
    .MAXIGP1ARESETN(),           // AXI PS Master GP1 Reset, output
// AXI PS Master GP1: Read Address    
    .MAXIGP1ARADDR(),            // AXI PS Master GP1 ARADDR[31:0], output  
    .MAXIGP1ARVALID(),           // AXI PS Master GP1 ARVALID, output
    .MAXIGP1ARREADY(),           // AXI PS Master GP1 ARREADY, input
    .MAXIGP1ARID(),              // AXI PS Master GP1 ARID[11:0], output
    .MAXIGP1ARLOCK(),            // AXI PS Master GP1 ARLOCK[1:0], output
    .MAXIGP1ARCACHE(),           // AXI PS Master GP1 ARCACHE[3:0], output
    .MAXIGP1ARPROT(),            // AXI PS Master GP1 ARPROT[2:0], output
    .MAXIGP1ARLEN(),             // AXI PS Master GP1 ARLEN[3:0], output
    .MAXIGP1ARSIZE(),            // AXI PS Master GP1 ARSIZE[1:0], output
    .MAXIGP1ARBURST(),           // AXI PS Master GP1 ARBURST[1:0], output
    .MAXIGP1ARQOS(),             // AXI PS Master GP1 ARQOS[3:0], output
// AXI PS Master GP1: Read Data
    .MAXIGP1RDATA(),             // AXI PS Master GP1 RDATA[31:0], input
    .MAXIGP1RVALID(),            // AXI PS Master GP1 RVALID, input
    .MAXIGP1RREADY(),            // AXI PS Master GP1 RREADY, output
    .MAXIGP1RID(),               // AXI PS Master GP1 RID[11:0], input
    .MAXIGP1RLAST(),             // AXI PS Master GP1 RLAST, input
    .MAXIGP1RRESP(),             // AXI PS Master GP1 RRESP[1:0], input
// AXI PS Master GP1: Write Address    
    .MAXIGP1AWADDR(),            // AXI PS Master GP1 AWADDR[31:0], output
    .MAXIGP1AWVALID(),           // AXI PS Master GP1 AWVALID, output
    .MAXIGP1AWREADY(),           // AXI PS Master GP1 AWREADY, input
    .MAXIGP1AWID(),              // AXI PS Master GP1 AWID[11:0], output
    .MAXIGP1AWLOCK(),            // AXI PS Master GP1 AWLOCK[1:0], output
    .MAXIGP1AWCACHE(),           // AXI PS Master GP1 AWCACHE[3:0], output
    .MAXIGP1AWPROT(),            // AXI PS Master GP1 AWPROT[2:0], output
    .MAXIGP1AWLEN(),             // AXI PS Master GP1 AWLEN[3:0], output
    .MAXIGP1AWSIZE(),            // AXI PS Master GP1 AWSIZE[1:0], output
    .MAXIGP1AWBURST(),           // AXI PS Master GP1 AWBURST[1:0], output
    .MAXIGP1AWQOS(),             // AXI PS Master GP1 AWQOS[3:0], output
// AXI PS Master GP1: Write Data
    .MAXIGP1WDATA(),             // AXI PS Master GP1 WDATA[31:0], output
    .MAXIGP1WVALID(),            // AXI PS Master GP1 WVALID, output
    .MAXIGP1WREADY(),            // AXI PS Master GP1 WREADY, input
    .MAXIGP1WID(),               // AXI PS Master GP1 WID[11:0], output
    .MAXIGP1WLAST(),             // AXI PS Master GP1 WLAST, output
    .MAXIGP1WSTRB(),             // AXI PS Master GP1 WSTRB[3:0], output
// AXI PS Master GP1: Write Responce
    .MAXIGP1BVALID(),            // AXI PS Master GP1 BVALID, input
    .MAXIGP1BREADY(),            // AXI PS Master GP1 BREADY, output
    .MAXIGP1BID(),               // AXI PS Master GP1 BID[11:0], input
    .MAXIGP1BRESP(),             // AXI PS Master GP1 BRESP[1:0], input

// AXI PS Slave GP0    
// AXI PS Slave GP0: Clock, Reset
    .SAXIGP0ACLK(),              // AXI PS Slave GP0 Clock , input
    .SAXIGP0ARESETN(),           // AXI PS Slave GP0 Reset, output
// AXI PS Slave GP0: Read Address    
    .SAXIGP0ARADDR(),            // AXI PS Slave GP0 ARADDR[31:0], input  
    .SAXIGP0ARVALID(),           // AXI PS Slave GP0 ARVALID, input
    .SAXIGP0ARREADY(),           // AXI PS Slave GP0 ARREADY, output
    .SAXIGP0ARID(),              // AXI PS Slave GP0 ARID[5:0], input
    .SAXIGP0ARLOCK(),            // AXI PS Slave GP0 ARLOCK[1:0], input
    .SAXIGP0ARCACHE(),           // AXI PS Slave GP0 ARCACHE[3:0], input
    .SAXIGP0ARPROT(),            // AXI PS Slave GP0 ARPROT[2:0], input
    .SAXIGP0ARLEN(),             // AXI PS Slave GP0 ARLEN[3:0], input
    .SAXIGP0ARSIZE(),            // AXI PS Slave GP0 ARSIZE[1:0], input
    .SAXIGP0ARBURST(),           // AXI PS Slave GP0 ARBURST[1:0], input
    .SAXIGP0ARQOS(),             // AXI PS Slave GP0 ARQOS[3:0], input
// AXI PS Slave GP0: Read Data
    .SAXIGP0RDATA(),             // AXI PS Slave GP0 RDATA[31:0], output
    .SAXIGP0RVALID(),            // AXI PS Slave GP0 RVALID, output
    .SAXIGP0RREADY(),            // AXI PS Slave GP0 RREADY, input
    .SAXIGP0RID(),               // AXI PS Slave GP0 RID[5:0], output
    .SAXIGP0RLAST(),             // AXI PS Slave GP0 RLAST, output
    .SAXIGP0RRESP(),             // AXI PS Slave GP0 RRESP[1:0], output
// AXI PS Slave GP0: Write Address    
    .SAXIGP0AWADDR(),            // AXI PS Slave GP0 AWADDR[31:0], input
    .SAXIGP0AWVALID(),           // AXI PS Slave GP0 AWVALID, input
    .SAXIGP0AWREADY(),           // AXI PS Slave GP0 AWREADY, output
    .SAXIGP0AWID(),              // AXI PS Slave GP0 AWID[5:0], input
    .SAXIGP0AWLOCK(),            // AXI PS Slave GP0 AWLOCK[1:0], input
    .SAXIGP0AWCACHE(),           // AXI PS Slave GP0 AWCACHE[3:0], input
    .SAXIGP0AWPROT(),            // AXI PS Slave GP0 AWPROT[2:0], input
    .SAXIGP0AWLEN(),             // AXI PS Slave GP0 AWLEN[3:0], input
    .SAXIGP0AWSIZE(),            // AXI PS Slave GP0 AWSIZE[1:0], input
    .SAXIGP0AWBURST(),           // AXI PS Slave GP0 AWBURST[1:0], input
    .SAXIGP0AWQOS(),             // AXI PS Slave GP0 AWQOS[3:0], input
// AXI PS Slave GP0: Write Data
    .SAXIGP0WDATA(),             // AXI PS Slave GP0 WDATA[31:0], input
    .SAXIGP0WVALID(),            // AXI PS Slave GP0 WVALID, input
    .SAXIGP0WREADY(),            // AXI PS Slave GP0 WREADY, output
    .SAXIGP0WID(),               // AXI PS Slave GP0 WID[5:0], input
    .SAXIGP0WLAST(),             // AXI PS Slave GP0 WLAST, input
    .SAXIGP0WSTRB(),             // AXI PS Slave GP0 WSTRB[3:0], input
// AXI PS Slave GP0: Write Responce
    .SAXIGP0BVALID(),            // AXI PS Slave GP0 BVALID, output
    .SAXIGP0BREADY(),            // AXI PS Slave GP0 BREADY, input
    .SAXIGP0BID(),               // AXI PS Slave GP0 BID[5:0], output //TODO:  Update range !!!
    .SAXIGP0BRESP(),             // AXI PS Slave GP0 BRESP[1:0], output

// AXI PS Slave GP1    
// AXI PS Slave GP1: Clock, Reset
    .SAXIGP1ACLK(),              // AXI PS Slave GP1 Clock , input
    .SAXIGP1ARESETN(),           // AXI PS Slave GP1 Reset, output
// AXI PS Slave GP1: Read Address    
    .SAXIGP1ARADDR(),            // AXI PS Slave GP1 ARADDR[31:0], input  
    .SAXIGP1ARVALID(),           // AXI PS Slave GP1 ARVALID, input
    .SAXIGP1ARREADY(),           // AXI PS Slave GP1 ARREADY, output
    .SAXIGP1ARID(),              // AXI PS Slave GP1 ARID[5:0], input
    .SAXIGP1ARLOCK(),            // AXI PS Slave GP1 ARLOCK[1:0], input
    .SAXIGP1ARCACHE(),           // AXI PS Slave GP1 ARCACHE[3:0], input
    .SAXIGP1ARPROT(),            // AXI PS Slave GP1 ARPROT[2:0], input
    .SAXIGP1ARLEN(),             // AXI PS Slave GP1 ARLEN[3:0], input
    .SAXIGP1ARSIZE(),            // AXI PS Slave GP1 ARSIZE[1:0], input
    .SAXIGP1ARBURST(),           // AXI PS Slave GP1 ARBURST[1:0], input
    .SAXIGP1ARQOS(),             // AXI PS Slave GP1 ARQOS[3:0], input
// AXI PS Slave GP1: Read Data
    .SAXIGP1RDATA(),             // AXI PS Slave GP1 RDATA[31:0], output
    .SAXIGP1RVALID(),            // AXI PS Slave GP1 RVALID, output
    .SAXIGP1RREADY(),            // AXI PS Slave GP1 RREADY, input
    .SAXIGP1RID(),               // AXI PS Slave GP1 RID[5:0], output
    .SAXIGP1RLAST(),             // AXI PS Slave GP1 RLAST, output
    .SAXIGP1RRESP(),             // AXI PS Slave GP1 RRESP[1:0], output
// AXI PS Slave GP1: Write Address    
    .SAXIGP1AWADDR(),            // AXI PS Slave GP1 AWADDR[31:0], input
    .SAXIGP1AWVALID(),           // AXI PS Slave GP1 AWVALID, input
    .SAXIGP1AWREADY(),           // AXI PS Slave GP1 AWREADY, output
    .SAXIGP1AWID(),              // AXI PS Slave GP1 AWID[5:0], input
    .SAXIGP1AWLOCK(),            // AXI PS Slave GP1 AWLOCK[1:0], input
    .SAXIGP1AWCACHE(),           // AXI PS Slave GP1 AWCACHE[3:0], input
    .SAXIGP1AWPROT(),            // AXI PS Slave GP1 AWPROT[2:0], input
    .SAXIGP1AWLEN(),             // AXI PS Slave GP1 AWLEN[3:0], input
    .SAXIGP1AWSIZE(),            // AXI PS Slave GP1 AWSIZE[1:0], input
    .SAXIGP1AWBURST(),           // AXI PS Slave GP1 AWBURST[1:0], input
    .SAXIGP1AWQOS(),             // AXI PS Slave GP1 AWQOS[3:0], input
// AXI PS Slave GP1: Write Data
    .SAXIGP1WDATA(),             // AXI PS Slave GP1 WDATA[31:0], input
    .SAXIGP1WVALID(),            // AXI PS Slave GP1 WVALID, input
    .SAXIGP1WREADY(),            // AXI PS Slave GP1 WREADY, output
    .SAXIGP1WID(),               // AXI PS Slave GP1 WID[5:0], input
    .SAXIGP1WLAST(),             // AXI PS Slave GP1 WLAST, input
    .SAXIGP1WSTRB(),             // AXI PS Slave GP1 WSTRB[3:0], input
// AXI PS Slave GP1: Write Responce
    .SAXIGP1BVALID(),            // AXI PS Slave GP1 BVALID, output
    .SAXIGP1BREADY(),            // AXI PS Slave GP1 BREADY, input
    .SAXIGP1BID(),               // AXI PS Slave GP1 BID[5:0], output
    .SAXIGP1BRESP(),             // AXI PS Slave GP1 BRESP[1:0], output

// AXI PS Slave HP0    
// AXI PS Slave HP0: Clock, Reset
    .SAXIHP0ACLK(),              // AXI PS Slave HP0 Clock , input
    .SAXIHP0ARESETN(),           // AXI PS Slave HP0 Reset, output
// AXI PS Slave HP0: Read Address    
    .SAXIHP0ARADDR(),            // AXI PS Slave HP0 ARADDR[31:0], input  
    .SAXIHP0ARVALID(),           // AXI PS Slave HP0 ARVALID, input
    .SAXIHP0ARREADY(),           // AXI PS Slave HP0 ARREADY, output
    .SAXIHP0ARID(),              // AXI PS Slave HP0 ARID[5:0], input
    .SAXIHP0ARLOCK(),            // AXI PS Slave HP0 ARLOCK[1:0], input
    .SAXIHP0ARCACHE(),           // AXI PS Slave HP0 ARCACHE[3:0], input
    .SAXIHP0ARPROT(),            // AXI PS Slave HP0 ARPROT[2:0], input
    .SAXIHP0ARLEN(),             // AXI PS Slave HP0 ARLEN[3:0], input
    .SAXIHP0ARSIZE(),            // AXI PS Slave HP0 ARSIZE[2:0], input
    .SAXIHP0ARBURST(),           // AXI PS Slave HP0 ARBURST[1:0], input
    .SAXIHP0ARQOS(),             // AXI PS Slave HP0 ARQOS[3:0], input
// AXI PS Slave HP0: Read Data
    .SAXIHP0RDATA(),             // AXI PS Slave HP0 RDATA[63:0], output
    .SAXIHP0RVALID(),            // AXI PS Slave HP0 RVALID, output
    .SAXIHP0RREADY(),            // AXI PS Slave HP0 RREADY, input
    .SAXIHP0RID(),               // AXI PS Slave HP0 RID[5:0], output
    .SAXIHP0RLAST(),             // AXI PS Slave HP0 RLAST, output
    .SAXIHP0RRESP(),             // AXI PS Slave HP0 RRESP[1:0], output
    .SAXIHP0RCOUNT(),            // AXI PS Slave HP0 RCOUNT[7:0], output
    .SAXIHP0RACOUNT(),           // AXI PS Slave HP0 RACOUNT[2:0], output
    .SAXIHP0RDISSUECAP1EN(),     // AXI PS Slave HP0 RDISSUECAP1EN, input
// AXI PS Slave HP0: Write Address    
    .SAXIHP0AWADDR(),            // AXI PS Slave HP0 AWADDR[31:0], input
    .SAXIHP0AWVALID(),           // AXI PS Slave HP0 AWVALID, input
    .SAXIHP0AWREADY(),           // AXI PS Slave HP0 AWREADY, output
    .SAXIHP0AWID(),              // AXI PS Slave HP0 AWID[5:0], input
    .SAXIHP0AWLOCK(),            // AXI PS Slave HP0 AWLOCK[1:0], input
    .SAXIHP0AWCACHE(),           // AXI PS Slave HP0 AWCACHE[3:0], input
    .SAXIHP0AWPROT(),            // AXI PS Slave HP0 AWPROT[2:0], input
    .SAXIHP0AWLEN(),             // AXI PS Slave HP0 AWLEN[3:0], input
    .SAXIHP0AWSIZE(),            // AXI PS Slave HP0 AWSIZE[1:0], input
    .SAXIHP0AWBURST(),           // AXI PS Slave HP0 AWBURST[1:0], input
    .SAXIHP0AWQOS(),             // AXI PS Slave HP0 AWQOS[3:0], input
// AXI PS Slave HP0: Write Data
    .SAXIHP0WDATA(),             // AXI PS Slave HP0 WDATA[63:0], input
    .SAXIHP0WVALID(),            // AXI PS Slave HP0 WVALID, input
    .SAXIHP0WREADY(),            // AXI PS Slave HP0 WREADY, output
    .SAXIHP0WID(),               // AXI PS Slave HP0 WID[5:0], input
    .SAXIHP0WLAST(),             // AXI PS Slave HP0 WLAST, input
    .SAXIHP0WSTRB(),             // AXI PS Slave HP0 WSTRB[7:0], input
    .SAXIHP0WCOUNT(),            // AXI PS Slave HP0 WCOUNT[7:0], output
    .SAXIHP0WACOUNT(),           // AXI PS Slave HP0 WACOUNT[5:0], output
    .SAXIHP0WRISSUECAP1EN(),     // AXI PS Slave HP0 WRISSUECAP1EN, input
// AXI PS Slave HP0: Write Responce
    .SAXIHP0BVALID(),            // AXI PS Slave HP0 BVALID, output
    .SAXIHP0BREADY(),            // AXI PS Slave HP0 BREADY, input
    .SAXIHP0BID(),               // AXI PS Slave HP0 BID[5:0], output
    .SAXIHP0BRESP(),             // AXI PS Slave HP0 BRESP[1:0], output

// AXI PS Slave HP1    
// AXI PS Slave 1: Clock, Reset
    .SAXIHP1ACLK(),              // AXI PS Slave HP1 Clock , input
    .SAXIHP1ARESETN(),           // AXI PS Slave HP1 Reset, output
// AXI PS Slave HP1: Read Address    
    .SAXIHP1ARADDR(),            // AXI PS Slave HP1 ARADDR[31:0], input  
    .SAXIHP1ARVALID(),           // AXI PS Slave HP1 ARVALID, input
    .SAXIHP1ARREADY(),           // AXI PS Slave HP1 ARREADY, output
    .SAXIHP1ARID(),              // AXI PS Slave HP1 ARID[5:0], input
    .SAXIHP1ARLOCK(),            // AXI PS Slave HP1 ARLOCK[1:0], input
    .SAXIHP1ARCACHE(),           // AXI PS Slave HP1 ARCACHE[3:0], input
    .SAXIHP1ARPROT(),            // AXI PS Slave HP1 ARPROT[2:0], input
    .SAXIHP1ARLEN(),             // AXI PS Slave HP1 ARLEN[3:0], input
    .SAXIHP1ARSIZE(),            // AXI PS Slave HP1 ARSIZE[2:0], input
    .SAXIHP1ARBURST(),           // AXI PS Slave HP1 ARBURST[1:0], input
    .SAXIHP1ARQOS(),             // AXI PS Slave HP1 ARQOS[3:0], input
// AXI PS Slave HP1: Read Data
    .SAXIHP1RDATA(),             // AXI PS Slave HP1 RDATA[63:0], output
    .SAXIHP1RVALID(),            // AXI PS Slave HP1 RVALID, output
    .SAXIHP1RREADY(),            // AXI PS Slave HP1 RREADY, input
    .SAXIHP1RID(),               // AXI PS Slave HP1 RID[5:0], output
    .SAXIHP1RLAST(),             // AXI PS Slave HP1 RLAST, output
    .SAXIHP1RRESP(),             // AXI PS Slave HP1 RRESP[1:0], output
    .SAXIHP1RCOUNT(),            // AXI PS Slave HP1 RCOUNT[7:0], output
    .SAXIHP1RACOUNT(),           // AXI PS Slave HP1 RACOUNT[2:0], output
    .SAXIHP1RDISSUECAP1EN(),     // AXI PS Slave HP1 RDISSUECAP1EN, input
// AXI PS Slave HP1: Write Address    
    .SAXIHP1AWADDR(),            // AXI PS Slave HP1 AWADDR[31:0], input
    .SAXIHP1AWVALID(),           // AXI PS Slave HP1 AWVALID, input
    .SAXIHP1AWREADY(),           // AXI PS Slave HP1 AWREADY, output
    .SAXIHP1AWID(),              // AXI PS Slave HP1 AWID[5:0], input
    .SAXIHP1AWLOCK(),            // AXI PS Slave HP1 AWLOCK[1:0], input
    .SAXIHP1AWCACHE(),           // AXI PS Slave HP1 AWCACHE[3:0], input
    .SAXIHP1AWPROT(),            // AXI PS Slave HP1 AWPROT[2:0], input
    .SAXIHP1AWLEN(),             // AXI PS Slave HP1 AWLEN[3:0], input
    .SAXIHP1AWSIZE(),            // AXI PS Slave HP1 AWSIZE[1:0], input
    .SAXIHP1AWBURST(),           // AXI PS Slave HP1 AWBURST[1:0], input
    .SAXIHP1AWQOS(),             // AXI PS Slave HP1 AWQOS[3:0], input
// AXI PS Slave HP1: Write Data
    .SAXIHP1WDATA(),             // AXI PS Slave HP1 WDATA[63:0], input
    .SAXIHP1WVALID(),            // AXI PS Slave HP1 WVALID, input
    .SAXIHP1WREADY(),            // AXI PS Slave HP1 WREADY, output
    .SAXIHP1WID(),               // AXI PS Slave HP1 WID[5:0], input
    .SAXIHP1WLAST(),             // AXI PS Slave HP1 WLAST, input
    .SAXIHP1WSTRB(),             // AXI PS Slave HP1 WSTRB[7:0], input
    .SAXIHP1WCOUNT(),            // AXI PS Slave HP1 WCOUNT[7:0], output
    .SAXIHP1WACOUNT(),           // AXI PS Slave HP1 WACOUNT[5:0], output
    .SAXIHP1WRISSUECAP1EN(),     // AXI PS Slave HP1 WRISSUECAP1EN, input
// AXI PS Slave HP1: Write Responce
    .SAXIHP1BVALID(),            // AXI PS Slave HP1 BVALID, output
    .SAXIHP1BREADY(),            // AXI PS Slave HP1 BREADY, input
    .SAXIHP1BID(),               // AXI PS Slave HP1 BID[5:0], output
    .SAXIHP1BRESP(),             // AXI PS Slave HP1 BRESP[1:0], output

// AXI PS Slave HP2    
// AXI PS Slave HP2: Clock, Reset
    .SAXIHP2ACLK(),              // AXI PS Slave HP2 Clock , input
    .SAXIHP2ARESETN(),           // AXI PS Slave HP2 Reset, output
// AXI PS Slave HP2: Read Address    
    .SAXIHP2ARADDR(),            // AXI PS Slave HP2 ARADDR[31:0], input  
    .SAXIHP2ARVALID(),           // AXI PS Slave HP2 ARVALID, input
    .SAXIHP2ARREADY(),           // AXI PS Slave HP2 ARREADY, output
    .SAXIHP2ARID(),              // AXI PS Slave HP2 ARID[5:0], input
    .SAXIHP2ARLOCK(),            // AXI PS Slave HP2 ARLOCK[1:0], input
    .SAXIHP2ARCACHE(),           // AXI PS Slave HP2 ARCACHE[3:0], input
    .SAXIHP2ARPROT(),            // AXI PS Slave HP2 ARPROT[2:0], input
    .SAXIHP2ARLEN(),             // AXI PS Slave HP2 ARLEN[3:0], input
    .SAXIHP2ARSIZE(),            // AXI PS Slave HP2 ARSIZE[2:0], input
    .SAXIHP2ARBURST(),           // AXI PS Slave HP2 ARBURST[1:0], input
    .SAXIHP2ARQOS(),             // AXI PS Slave HP2 ARQOS[3:0], input
// AXI PS Slave HP2: Read Data
    .SAXIHP2RDATA(),             // AXI PS Slave HP2 RDATA[63:0], output
    .SAXIHP2RVALID(),            // AXI PS Slave HP2 RVALID, output
    .SAXIHP2RREADY(),            // AXI PS Slave HP2 RREADY, input
    .SAXIHP2RID(),               // AXI PS Slave HP2 RID[5:0], output
    .SAXIHP2RLAST(),             // AXI PS Slave HP2 RLAST, output
    .SAXIHP2RRESP(),             // AXI PS Slave HP2 RRESP[1:0], output
    .SAXIHP2RCOUNT(),            // AXI PS Slave HP2 RCOUNT[7:0], output
    .SAXIHP2RACOUNT(),           // AXI PS Slave HP2 RACOUNT[2:0], output
    .SAXIHP2RDISSUECAP1EN(),     // AXI PS Slave HP2 RDISSUECAP1EN, input
// AXI PS Slave HP2: Write Address    
    .SAXIHP2AWADDR(),            // AXI PS Slave HP2 AWADDR[31:0], input
    .SAXIHP2AWVALID(),           // AXI PS Slave HP2 AWVALID, input
    .SAXIHP2AWREADY(),           // AXI PS Slave HP2 AWREADY, output
    .SAXIHP2AWID(),              // AXI PS Slave HP2 AWID[5:0], input
    .SAXIHP2AWLOCK(),            // AXI PS Slave HP2 AWLOCK[1:0], input
    .SAXIHP2AWCACHE(),           // AXI PS Slave HP2 AWCACHE[3:0], input
    .SAXIHP2AWPROT(),            // AXI PS Slave HP2 AWPROT[2:0], input
    .SAXIHP2AWLEN(),             // AXI PS Slave HP2 AWLEN[3:0], input
    .SAXIHP2AWSIZE(),            // AXI PS Slave HP2 AWSIZE[1:0], input
    .SAXIHP2AWBURST(),           // AXI PS Slave HP2 AWBURST[1:0], input
    .SAXIHP2AWQOS(),             // AXI PS Slave HP2 AWQOS[3:0], input
// AXI PS Slave HP2: Write Data
    .SAXIHP2WDATA(),             // AXI PS Slave HP2 WDATA[63:0], input
    .SAXIHP2WVALID(),            // AXI PS Slave HP2 WVALID, input
    .SAXIHP2WREADY(),            // AXI PS Slave HP2 WREADY, output
    .SAXIHP2WID(),               // AXI PS Slave HP2 WID[5:0], input
    .SAXIHP2WLAST(),             // AXI PS Slave HP2 WLAST, input
    .SAXIHP2WSTRB(),             // AXI PS Slave HP2 WSTRB[7:0], input
    .SAXIHP2WCOUNT(),            // AXI PS Slave HP2 WCOUNT[7:0], output
    .SAXIHP2WACOUNT(),           // AXI PS Slave HP2 WACOUNT[5:0], output
    .SAXIHP2WRISSUECAP1EN(),     // AXI PS Slave HP2 WRISSUECAP1EN, input
// AXI PS Slave HP2: Write Responce
    .SAXIHP2BVALID(),            // AXI PS Slave HP2 BVALID, output
    .SAXIHP2BREADY(),            // AXI PS Slave HP2 BREADY, input
    .SAXIHP2BID(),               // AXI PS Slave HP2 BID[5:0], output
    .SAXIHP2BRESP(),             // AXI PS Slave HP2 BRESP[1:0], output

// AXI PS Slave HP3    
// AXI PS Slave HP3: Clock, Reset
    .SAXIHP3ACLK(),              // AXI PS Slave HP3 Clock , input
    .SAXIHP3ARESETN(),           // AXI PS Slave HP3 Reset, output
// AXI PS Slave HP3: Read Address    
    .SAXIHP3ARADDR(),            // AXI PS Slave HP3 ARADDR[31:0], input  
    .SAXIHP3ARVALID(),           // AXI PS Slave HP3 ARVALID, input
    .SAXIHP3ARREADY(),           // AXI PS Slave HP3 ARREADY, output
    .SAXIHP3ARID(),              // AXI PS Slave HP3 ARID[5:0], input
    .SAXIHP3ARLOCK(),            // AXI PS Slave HP3 ARLOCK[1:0], input
    .SAXIHP3ARCACHE(),           // AXI PS Slave HP3 ARCACHE[3:0], input
    .SAXIHP3ARPROT(),            // AXI PS Slave HP3 ARPROT[2:0], input
    .SAXIHP3ARLEN(),             // AXI PS Slave HP3 ARLEN[3:0], input
    .SAXIHP3ARSIZE(),            // AXI PS Slave HP3 ARSIZE[2:0], input
    .SAXIHP3ARBURST(),           // AXI PS Slave HP3 ARBURST[1:0], input
    .SAXIHP3ARQOS(),             // AXI PS Slave HP3 ARQOS[3:0], input
// AXI PS Slave HP3: Read Data
    .SAXIHP3RDATA(),             // AXI PS Slave HP3 RDATA[63:0], output
    .SAXIHP3RVALID(),            // AXI PS Slave HP3 RVALID, output
    .SAXIHP3RREADY(),            // AXI PS Slave HP3 RREADY, input
    .SAXIHP3RID(),               // AXI PS Slave HP3 RID[5:0], output
    .SAXIHP3RLAST(),             // AXI PS Slave HP3 RLAST, output
    .SAXIHP3RRESP(),             // AXI PS Slave HP3 RRESP[1:0], output
    .SAXIHP3RCOUNT(),            // AXI PS Slave HP3 RCOUNT[7:0], output
    .SAXIHP3RACOUNT(),           // AXI PS Slave HP3 RACOUNT[2:0], output
    .SAXIHP3RDISSUECAP1EN(),     // AXI PS Slave HP3 RDISSUECAP1EN, input
// AXI PS Slave HP3: Write Address    
    .SAXIHP3AWADDR(),            // AXI PS Slave HP3 AWADDR[31:0], input
    .SAXIHP3AWVALID(),           // AXI PS Slave HP3 AWVALID, input
    .SAXIHP3AWREADY(),           // AXI PS Slave HP3 AWREADY, output
    .SAXIHP3AWID(),              // AXI PS Slave HP3 AWID[5:0], input
    .SAXIHP3AWLOCK(),            // AXI PS Slave HP3 AWLOCK[1:0], input
    .SAXIHP3AWCACHE(),           // AXI PS Slave HP3 AWCACHE[3:0], input
    .SAXIHP3AWPROT(),            // AXI PS Slave HP3 AWPROT[2:0], input
    .SAXIHP3AWLEN(),             // AXI PS Slave HP3 AWLEN[3:0], input
    .SAXIHP3AWSIZE(),            // AXI PS Slave HP3 AWSIZE[1:0], input
    .SAXIHP3AWBURST(),           // AXI PS Slave HP3 AWBURST[1:0], input
    .SAXIHP3AWQOS(),             // AXI PS Slave HP3 AWQOS[3:0], input
// AXI PS Slave HP3: Write Data
    .SAXIHP3WDATA(),             // AXI PS Slave HP3 WDATA[63:0], input
    .SAXIHP3WVALID(),            // AXI PS Slave HP3 WVALID, input
    .SAXIHP3WREADY(),            // AXI PS Slave HP3 WREADY, output
    .SAXIHP3WID(),               // AXI PS Slave HP3 WID[5:0], input
    .SAXIHP3WLAST(),             // AXI PS Slave HP3 WLAST, input
    .SAXIHP3WSTRB(),             // AXI PS Slave HP3 WSTRB[7:0], input
    .SAXIHP3WCOUNT(),            // AXI PS Slave HP3 WCOUNT[7:0], output
    .SAXIHP3WACOUNT(),           // AXI PS Slave HP3 WACOUNT[5:0], output
    .SAXIHP3WRISSUECAP1EN(),     // AXI PS Slave HP3 WRISSUECAP1EN, input
// AXI PS Slave HP3: Write Responce
    .SAXIHP3BVALID(),            // AXI PS Slave HP3 BVALID, output
    .SAXIHP3BREADY(),            // AXI PS Slave HP3 BREADY, input
    .SAXIHP3BID(),               // AXI PS Slave HP3 BID[5:0], output
    .SAXIHP3BRESP(),             // AXI PS Slave HP3 BRESP[1:0], output

// AXI PS Slave ACP    
// AXI PS Slave ACP: Clock, Reset
    .SAXIACPACLK(),              // AXI PS Slave ACP Clock, input
    .SAXIACPARESETN(),           // AXI PS Slave ACP Reset, output
// AXI PS Slave ACP: Read Address    
    .SAXIACPARADDR(),            // AXI PS Slave ACP ARADDR[31:0], input  
    .SAXIACPARVALID(),           // AXI PS Slave ACP ARVALID, input
    .SAXIACPARREADY(),           // AXI PS Slave ACP ARREADY, output
    .SAXIACPARID(),              // AXI PS Slave ACP ARID[2:0], input
    .SAXIACPARLOCK(),            // AXI PS Slave ACP ARLOCK[1:0], input
    .SAXIACPARCACHE(),           // AXI PS Slave ACP ARCACHE[3:0], input
    .SAXIACPARPROT(),            // AXI PS Slave ACP ARPROT[2:0], input
    .SAXIACPARLEN(),             // AXI PS Slave ACP ARLEN[3:0], input
    .SAXIACPARSIZE(),            // AXI PS Slave ACP ARSIZE[2:0], input
    .SAXIACPARBURST(),           // AXI PS Slave ACP ARBURST[1:0], input
    .SAXIACPARQOS(),             // AXI PS Slave ACP ARQOS[3:0], input
    .SAXIACPARUSER(),            // AXI PS Slave ACP ARUSER[4:0], input
// AXI PS Slave ACP: Read Data
    .SAXIACPRDATA(),             // AXI PS Slave ACP RDATA[63:0], output
    .SAXIACPRVALID(),            // AXI PS Slave ACP RVALID, output
    .SAXIACPRREADY(),            // AXI PS Slave ACP RREADY, input
    .SAXIACPRID(),               // AXI PS Slave ACP RID[2:0], output
    .SAXIACPRLAST(),             // AXI PS Slave ACP RLAST, output
    .SAXIACPRRESP(),             // AXI PS Slave ACP RRESP[1:0], output
// AXI PS Slave ACP: Write Address    
    .SAXIACPAWADDR(),            // AXI PS Slave ACP AWADDR[31:0], input
    .SAXIACPAWVALID(),           // AXI PS Slave ACP AWVALID, input
    .SAXIACPAWREADY(),           // AXI PS Slave ACP AWREADY, output
    .SAXIACPAWID(),              // AXI PS Slave ACP AWID[2:0], input
    .SAXIACPAWLOCK(),            // AXI PS Slave ACP AWLOCK[1:0], input
    .SAXIACPAWCACHE(),           // AXI PS Slave ACP AWCACHE[3:0], input
    .SAXIACPAWPROT(),            // AXI PS Slave ACP AWPROT[2:0], input
    .SAXIACPAWLEN(),             // AXI PS Slave ACP AWLEN[3:0], input
    .SAXIACPAWSIZE(),            // AXI PS Slave ACP AWSIZE[1:0], input
    .SAXIACPAWBURST(),           // AXI PS Slave ACP AWBURST[1:0], input
    .SAXIACPAWQOS(),             // AXI PS Slave ACP AWQOS[3:0], input
    .SAXIACPAWUSER(),            // AXI PS Slave ACP AWUSER[4:0], input
    
// AXI PS Slave ACP: Write Data
    .SAXIACPWDATA(),             // AXI PS Slave ACP WDATA[63:0], input
    .SAXIACPWVALID(),            // AXI PS Slave ACP WVALID, input
    .SAXIACPWREADY(),            // AXI PS Slave ACP WREADY, output
    .SAXIACPWID(),               // AXI PS Slave ACP WID[2:0], input
    .SAXIACPWLAST(),             // AXI PS Slave ACP WLAST, input
    .SAXIACPWSTRB(),             // AXI PS Slave ACP WSTRB[7:0], input
// AXI PS Slave ACP: Write Responce
    .SAXIACPBVALID(),            // AXI PS Slave ACP BVALID, output
    .SAXIACPBREADY(),            // AXI PS Slave ACP BREADY, input
    .SAXIACPBID(),               // AXI PS Slave ACP BID[2:0], output
    .SAXIACPBRESP(),             // AXI PS Slave ACP BRESP[1:0], output
// Direct connection to PS package pads
    .DDRA(),                     // PS DDRA[14:0], inout
    .DDRBA(),                    // PS DDRBA[2:0], inout
    .DDRCASB(),                  // PS DDRCASB, inout
    .DDRCKE(),                   // PS DDRCKE, inout
    .DDRCKP(),                   // PS DDRCKP, inout
    .DDRCKN(),                   // PS DDRCKN, inout
    .DDRCSB(),                   // PS DDRCSB, inout
    .DDRDM(),                    // PS DDRDM[3:0], inout
    .DDRDQ(),                    // PS DDRDQ[31:0], inout
    .DDRDQSP(),                  // PS DDRDQSP[3:0], inout
    .DDRDQSN(),                  // PS DDRDQSN[3:0], inout
    .DDRDRSTB(),                 // PS DDRDRSTB, inout
    .DDRODT(),                   // PS DDRODT, inout
    .DDRRASB(),                  // PS DDRRASB, inout
    .DDRVRN(),                   // PS DDRVRN, inout
    .DDRVRP(),                   // PS DDRVRP, inout
    .DDRWEB(),                   // PS DDRWEB, inout
    .MIO(),                      // PS MIO[53:0], inout // clg225 has less
    .PSCLK(),                    // PS PSCLK, inout
    .PSPORB(),                   // PS PSPORB, inout
    .PSSRSTB()                  // PS PSSRSTB, inout
  );
1552 1553
BUFG bufg_axi_rst_i   (.O(axi_rst),.I(axi_rst_pre));
BUFG bufg_axi_aclk_i  (.O(axi_aclk),.I(fclk[0]));
1554
endmodule