Skip to content

V
vdt-plugin
Commit 7b4dd3e9 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

Added ISE PAR tool specificaions

parent 14b819a5
Show whitespace changes
Inline Side-by-side
Showing with 247 additions and 5 deletions
src/com/elphel/vdt/ui/views/DesignFlowView.java
View file @ 7b4dd3e9
......@@ -355,8 +355,8 @@ public class DesignFlowView extends ViewPart implements ISelectionListener {
manager.add(new Separator());
manager.add(clearStateFilesAction);
manager.add(clearLogFilesAction);
manager.add(new Separator());
manager.add(clearToolStatesAction);
manager.add(new Separator());
manager.add(clearProjectStatesAction);
}
......@@ -573,7 +573,7 @@ public class DesignFlowView extends ViewPart implements ISelectionListener {
selectDesignMenuAction.setImageDescriptor(VDTPluginImages.DESC_DESIGN_MENU);
clearToolStatesAction = new ClearToolStates("Do you wish to reset all tool states (as if they never ran)?",toolSequence);
clearToolStatesAction.setText("Clear tool states (debug feature)");
clearToolStatesAction.setText("Clear tool states");
clearToolStatesAction.setImageDescriptor(VDTPluginImages.DESC_ERASE);
clearProjectStatesAction = new ClearProjectStates("Do you wish to reset the project state (persistent storage) as if no tools ran?",
......
tools/DesignMenu.xml
View file @ 7b4dd3e9
......@@ -60,6 +60,10 @@
label="Map design"
icon="map_icon.png"
call="ISEMap"/>
<menuitem name="ISEPAR"
label="Place &amp; route design"
icon="route66.png"
call="ISEPAR"/>
</menu>
<menu name="Vivado"
......
tools/FPGA_project.xml
View file @ 7b4dd3e9
......@@ -327,6 +327,12 @@
default="%%ProjectName-map.tgz"
type="String" format="CopyValue" />
<parameter id="ISESnapshotPAR"
label="NGDBuild snapshot" tooltip="Name of ISE snapshot archive after PAR"
default="%%ProjectName-par.tgz"
type="String" format="CopyValue" />
<parameter id="ISESnapshotOptPlace"
label="Placement snapshot" tooltip="Name of ISE snapshot archive after optimization/placement"
default="%%ProjectName-opt-place.tgz"
......@@ -418,6 +424,7 @@
"ISESnapshotSynth"
"ISESnapshotNGDBuild"
"ISESnapshotMap"
"ISESnapshotPAR"
<!-- "ISESnapshotOptPlace" -->
"ISESnapshotOpt"
"ISESnapshotOptPower"
......
tools/Xilinx_ISE/ise_map.xml
View file @ 7b4dd3e9
......@@ -220,6 +220,8 @@
"physical_constraints_file"
"extra_input_files"
"output_file"
</group>
<group name ="Map Options">
"activityfile"
"map_slice_logic"
"pack_slices"
......@@ -251,9 +253,6 @@
"ISEProjectRoot"
"ISERemoteDir"
</group>
<group name ="NGCBuild Options">
</group>
</input>
<output>
<if-not extra_input_files="">
......
tools/Xilinx_ISE/ise_par.xml 0 → 100644
View file @ 7b4dd3e9
<?xml version="1.0" encoding="UTF-8"?>
<vdt-project>
<interface name="ISEPARInterface" extends="ISEInterface">
<typedef name="MTType4">
<paramtype kind= "enum" base="String">
<item value= "off" label="multi-threading off"/>
<item value= "2" label="use 2 CPU cores if available"/>
<item value= "3" label="use 3 CPU cores if available"/>
<item value= "4" label="use 4 CPU cores if available"/>
</paramtype>
</typedef>
<typedef name="OLType">
<paramtype kind= "enum" base="String">
<item value= "" label="default effort level (varies for architectures)"/>
<item value= "std" label="standard effort level"/>
<item value= "high" label="high effort level"/>
</paramtype>
</typedef>
<typedef name="NormalContinueType">
<paramtype kind= "enum" base="String">
<item value= "n" label="normal"/>
<item value= "c" label="continue"/>
</paramtype>
</typedef>
</interface>
<tool name="ISEPAR" label="run PAR"
project="FPGA_project"
interface="ISEPARInterface"
package="FPGA_package"
shell="/bin/bash"
ignore="%ISEIgnoreSource"
description="Run PAR"
result="ISESnapshotPAR"
log-dir="ISELogDir"
state-dir="ISELocalDir"
restore="RestoreISEPAR"
autosave="AutosaveISEPAR"
save="SaveISEPAR"
inherits="ISEToolPrototype"
>
<action-menu>
<action label="Run PAR" resource="" icon="route66.png" />
</action-menu>
<depends-list>
<depends state="ISESnapshotMap"/>
<!-- <depends files="constraints"/>-->
</depends-list>
<parameter id="SkipSnapshotPAR" label="Skip snapshot" tooltip="Do not create snapshot after PAR"
default="false" type= "Boolean" format="None"/>
<parameter id="input_file" label="Design file name" tooltip= "Input design file name (*.ncd)"
default="%%ProjectName.ncd" visible="true" type="String" format="CopyValue"/>
<parameter id="physical_constraints_file" label="Physical constraints file" tooltip= "Physical constraints file (*.pcf)"
default="%%ProjectName.pcf" visible="true" omit="" type="String" format="CopyValue"/>
<parameter id="extra_input_files" label="extra files"
tooltip= "Extra input files to copy to the top directory before running PAR"
default="" omit="" visible="true" type="Filelist" format="ParamListSyntax"/>
<!-- Can output_file be the same as input_file? -->
<parameter id="output_file" label="Output file name" tooltip= "Output file name (*ncd) - may be the same as input"
default="%%ProjectName.ncd" visible="true" omit="" type="String" format="CopyValue"/>
<!-- PAR options -->
<parameter id="activityfile" label="Activity file" tooltip= "*.vcd or *.saif file for power optimization (only valid with -power on)"
default="" visible="true" omit="" type="String" format="Dash"/>
<parameter id="clock_regions" label="Clock regions" tooltip= "Generate clock regions report file"
default="" visible="true" omit="" type="String" format="Dash"/>
<parameter id="re_untrant_routing" outid="k" label="Re-entrant routing" tooltip= "List of two (*.ncd) files: previous.ncd reemtrant.ncd (one per line)"
default="" visible="true" omit="" type="Stringlist" format="DashListCommon"/>
<parameter id="multi_threading" outid="mt" label="Multi-threading"
tooltip= "Enable multithreading during routing"
default="off" visible="true" omit="off" type="MTType4" format="Dash"/>
<parameter id="nopad" label="Skip pad reports" tooltip="Skip pad reports (by default 3 pad reports are created)"
default="false" omit="false" type= "Boolean" format="DashName"/>
<parameter id="non_timing_driven" outid="ntd" label="Non timing-driven"
tooltip="Run in non timing-driven mode for PAR. (separate switch for MAP)"
default="false" omit="false" type= "Boolean" format="DashName"/>
<parameter id="overall_effor_level" outid="ol" label="Overall effort level"
tooltip= "Overall PAR effort level, default varies for architectures"
default="" visible="true" omit="" type="OLType" format="Dash"/>
<parameter id="no_placement" outid="p" label="Skip placement" tooltip="Skip placement, route only"
default="false" omit="false" type= "Boolean" format="DashName"/>
<parameter id="placer_effor_level" outid="pl" label="Placer effort level"
tooltip= "Placer effort level, only fopr S-3,S-3A, S-3E and V-4. For other use 'ol' - overall effort level"
default="" visible="true" omit="" type="OLType" format="Dash"/>
<parameter id="power" label="Power-aware PAR"
tooltip="For devices other than S-6,V-6,V-7 and Zynq may use 'activityfile' when this option is on"
default="false" omit="false" type= "Bool_on_off" format="Dash"/>
<parameter id="no_routing" outid="r" label="Skip placement" tooltip="Skip placement, route only"
default="false" omit="false" type= "Boolean" format="DashName"/>
<parameter id="router_effor_level" outid="rl" label="Router effort level"
tooltip= "Router effort level, only fopr S-3,S-3A, S-3E and V-4. For other use 'ol' - overall effort level"
default="" visible="true" omit="" type="OLType" format="Dash"/>
<parameter id="smartguide" label="Guide file name" tooltip= "Guide file name (*.ncd)"
default="" omit="" visible="true" type="String" format="Dash"/>
<parameter id="placer_cost_table" outid="t" label="Placer cost table"
tooltip= "Placer cost table with values in 1-100 range. Valid for S3,S3A,S3E,V4 - for others use Map '-t' option"
default="" visible="true" omit="" type="String" format="Dash"/>
<parameter id="overwrite" outid="w" label="Overwrite existent files"
tooltip="Overwrite existent files including design (*.ncd) files."
default="true" omit="false" type= "Boolean" format="DashName"/>
<parameter id="performance_evaluation" outid="x" label="Performance evaluation mode"
tooltip="Use tool-generated timing constraints instead of the specified to evaluate each clock in the design."
default="false" omit="false" type= "Boolean" format="DashName"/>
<parameter id="extra_effort" outid="xe" label="Extra effort"
tooltip= "Extra effort for timing-driven packing and placement"
default="n" visible="true" omit="n" type="NormalContinueType" format="Dash"/>
<!-- common parameters from the base tool -->
<parameter id="intstyle"/> <!-- USED PAR -->
<parameter id="command_files"/> <!-- USED PAR-->
<parameter id="speed_grade"/>
<!-- calculated parameters -->
<parameter id="ISEPARActionIndex" default="%%ChosenActionIndex"
type="String" format="CopyValue" visible="false" />
<parameter id="AutosaveISEPAR" default="?%%ChosenActionIndex=0 ^ %SkipSnapshotPAR=false : true, false"
visible="false" type="Boolean" format="None"/>
<parameter id="rawSmartguide" default="%smartguide" visible="false" type="String" format="CopyValue"/>
<input>
<group name="General options">
"SkipSnapshotPAR"
"input_file"
"physical_constraints_file"
"extra_input_files"
"output_file"
</group>
<group name ="PAR Options">
<!-- PAR options -->
"activityfile"
"clock_regions"
"re_untrant_routing"
"multi_threading"
"nopad"
"non_timing_driven"
"overall_effor_level"
"no_placement"
"placer_effor_level"
"power"
"no_routing"
"router_effor_level"
"smartguide"
"placer_cost_table"
"overwrite"
"performance_evaluation"
"extra_effort"
"---"
"ISEProjectRoot"
"ISERemoteDir"
</group>
</input>
<output>
<if-not extra_input_files="">
<line name="ise_copy_pre_par">
"-c"
"rsync -avrR -e ssh"
"%extra_input_files"
"%RemoteUser@%RemoteHost:%ISEProjectRoot"
</line>
</if-not>
<line name="ise_run_par"
dest="ISEConsole"
mark="``"
sep=" "
prompt="@@FINISH@@"
success="@@FINISH@@"
failure="ERROR"
log=""
stdout="parser_ISE">
"mkdir -p"
"~/%ISEProjectRoot/%ISERemoteDir"
"\n"
"cd ~/%ISEProjectRoot\n"
"%ISEBinAbsolutePath/par"
<!-- par command options -->
"%activityfile"
"%clock_regions"
"%re_untrant_routing"
"%multi_threading"
"%nopad"
"%non_timing_driven"
"%overall_effor_level"
"%no_placement"
"%placer_effor_level"
"%power"
"%no_routing"
"%router_effor_level"
"%smartguide"
"%placer_cost_table"
"%overwrite"
"%performance_evaluation"
"%extra_effort"
<!-- input (*.ngd) file -->
"%input_file"
<!-- output (*.ngd) file -->
"%output_file"
<!-- physical constraints (*.pcf) output file -->
"%physical_constraints_file"
"\n"
"echo \"@@FINISH@@\"\n"
</line>
<!-- TODO: copy results -->
<line name="ise_copy_after_par">
"-c"
"mkdir -p %ISELocalResultDir ;"
"rsync -avr -e ssh"
<!-- "%RemoteUser@%RemoteHost:%ISEProjectRoot/%ISERemoteDir/*.mrp" -->
"%RemoteUser@%RemoteHost:%ISEProjectRoot/*.par"
"%ISELocalResultDir/"
</line>
</output>
</tool>
<!-- Restore tool for ISESynthesis -->
<tool name="RestoreISEPAR"
project="FPGA_project"
interface="ISEInterface"
package="FPGA_package"
inherits="RestoreISE"/>
<!-- Save tool for ISESynthesis -->
<tool name="SaveISEPAR"
project="FPGA_project"
interface="ISEInterface"
package="FPGA_package"
inherits="SaveISE"/>
</vdt-project>
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment