removed meta-microzed sub-layer

README.md

@@ -9,7 +9,7 @@ with a bitstream - it is planned to do under the control of the operating system
 if needed this feature can be implemented using u-boot...
 ***
 ## Supported boards/machines
-Boards supported by this layer and sub-layers:
+Boards supported by this layer:
 
 * **Avnet MicroZed (Zynq)**
 
@@ -22,25 +22,13 @@ This layer depends on:
 * URI: *git://github.com/Xilinx/u-boot-xlnx.git*, branch=master-next
 * URI: *git://git.code.sf.net/p/elphel/ezynq*
 
-## Sub-layers
-
-This repository contains the meta-ezynq layer as well as additional board
-specific layers. Each of these board specific layers provide additional
-configuration for the associated board. Please refer to the associated README
-in each sub-layer for more details.
-
-Note: sub-layers have no dependency between each other, all sub-layers can be
-used at the same time without conflicts.
-***
 ## Build instructions
 The following instructions require a Poky installation (or equivalent).
 
 Initialize a build using the *oe-init-build-env* script in Poky. Once
-initialized configure *bblayers.conf* by adding the *meta-ezynq* layer as
-well as any or all of the sub-layers of this repository, e.g.:
+initialized configure *bblayers.conf* by adding the *meta-ezynq* layer:
 
 	meta-ezynq \
-	meta-ezynq/meta-microzed \
 
 To build a specific target BSP configure the associated machine in *local.conf*:
 (See associated sub-layers for available machines and additional details)

meta-microzed/README.md

-# meta-microzed
-***
-This *README* file contains information on using the *meta-microzed* BSP layer.
-
-The [MicroZed board](http://www.microzed.org/) is an evaluation board by Avnet for the Zynq architecture.
-	
-Please refer to the *meta-ezynq/README* for details regarding patch submission,
-layer dependencies, build process, etc.
-
-***
-## Supported Boards/Machines
-* **Avnet MicroZed (Zynq) - "microzed"**
-
-## Reference files and documents
-[http://www.microzed.org](http://www.microzed.org)
-
-## SD Card Boot
-**Note:** This boot flow generates a bootable **boot.bin**.
-
-1. Copy **boot.bin** onto the SD Card.
-* (might not work) Copy the following to the SD card (ensure to rename the files where appropriate):
-    *  **uImage** - kernel
-    *  **uramdisk.image.gz** (core-image-minimal-<machine name>.ext2.gz.u-boot) - RootFS
-    *  **devicetree.dtb** (uImage-<machine name>.dtb) - Device Tree Blob
-* Insert SD Card, connect UART to Terminal program and boot board (Ensure the
-board is configured for SD Boot).
-* Once in u-boot command line - to boot *uImage* type:
-
-        ezynq> boot
-

meta-microzed/conf/layer.conf

-# We have a conf and classes directory, add to BBPATH
-BBPATH := "${BBPATH}:${LAYERDIR}"
-
-# We have a packages directory, add to BBFILES
-BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \
-	    ${LAYERDIR}/recipes-*/*/*.bbappend"
-
-#leaving as is until better understanding
-BBFILE_COLLECTIONS += "microzed"
-BBFILE_PATTERN_microzed := "^${LAYERDIR}/"
-BBFILE_PRIORITY_microzed = "8"
-