Commit e4ad4ba9 authored by Mikhail Karpenko's avatar Mikhail Karpenko

Merge branch 'master' of https://github.com/Elphel/meta-elphel393

parents 7bda0baf 817feac3
......@@ -33,6 +33,7 @@ EXTRA_OEMAKE = " \
USERADD='${ELPHEL393_USERADD}' \
REMOTE_USER=${REMOTE_USER} \
REMOTE_IP=${REMOTE_IP} \
INITSTRING=${INITSTRING} \
"
do_compile_prepend() {
......
# Adding support for scp files to the target (similar to install) ---
IDENTITY_FILE ?= "-i ~/.ssh/id_rsa"
IDENTITY_FILE ??= "~/.ssh/id_rsa"
do_target_scp () {
#Without next echo - no trace of the scp in the log!
SSH_COMMAND='tar -C / -xzpf /image.tar.gz; rm -f /image.tar.gz; sync'
tar -czvf ${WORKDIR}/image.tar.gz -C ${WORKDIR}/image .
echo scp ${IDENTITY_FILE} -p ${WORKDIR}/image.tar.gz ${REMOTE_USER}@${REMOTE_IP}:/
scp ${IDENTITY_FILE} -p ${WORKDIR}/image.tar.gz ${REMOTE_USER}@${REMOTE_IP}:/
echo ssh ${IDENTITY_FILE} ${REMOTE_USER}@${REMOTE_IP} ${SSH_COMMAND}
ssh ${IDENTITY_FILE} ${REMOTE_USER}@${REMOTE_IP} ${SSH_COMMAND}
echo scp -i ${IDENTITY_FILE} -p ${WORKDIR}/image.tar.gz ${REMOTE_USER}@${REMOTE_IP}:/
scp -i ${IDENTITY_FILE} -p ${WORKDIR}/image.tar.gz ${REMOTE_USER}@${REMOTE_IP}:/
echo ssh -i ${IDENTITY_FILE} ${REMOTE_USER}@${REMOTE_IP} ${SSH_COMMAND}
ssh -i ${IDENTITY_FILE} ${REMOTE_USER}@${REMOTE_IP} ${SSH_COMMAND}
}
addtask do_target_scp after do_install
......
......@@ -53,7 +53,7 @@ IMAGE_INSTALL_append += " \
dhcp-client \
dhcpcd \
linux-firmware-rtl8192cu \
init-elphel393 \
init \
overlay-sync \
init-tempmon \
ahci-blacklist \
......
......@@ -3,7 +3,8 @@
#ifconfig eth0 hw ether 00:0e:64:10:00:02 192.168.0.7
# select sensor type: 5 Mpx (set 5) or 14 Mpx (set 14)
SENSOR_TYPE=14
# 14MPix does not work with framepars & parsedit!!!
SENSOR_TYPE=5
# imgsrv port number
IMGSRV_PORT=2323
# camogm port number
......@@ -14,7 +15,7 @@ CAMOGM_PIPE=/var/volatile/camogm_cmd
SATA_EN=1
#for andrey:
ifconfig eth0 192.168.0.7
ifconfig eth0 192.168.0.9
PYDIR=/usr/local/bin
VERILOG_DIR=/usr/local/verilog
......@@ -24,6 +25,21 @@ imgsrv -p 2323
#restart PHP - it can get errors while opening/mmaping at startup, then some functions fail
killall lighttpd; /usr/sbin/lighttpd -f /etc/lighttpd.conf
/www/pages/exif.php init=/etc/Exif_template.xml
echo "init sensor port"
wget -qO- "localhost/framepars.php?sensor_port=0&cmd=init" > /dev/null 2>&1
autoexposure -p 0 -c 0 -b 0 -d 1 >> /dev/null 2>&1 &
echo "start autoexposure daemon"
wget -qO- "localhost/parsedit.php?immediate&COMPRESSOR_RUN=2&DAEMON_EN=1&AUTOEXP_ON=1&AEXP_FRACPIX=0xff80&AEXP_LEVEL=0xf800&AE_PERIOD=4&AE_THRESH=500&HIST_DIM_01=0x0a000a00&HIST_DIM_23=0x0a000a00&EXP_AHEAD=3" > /dev/null 2>&1
echo "start white balance daemon"
wget -qO- "localhost/parsedit.php?immediate&COMPRESSOR_RUN=2&DAEMON_EN=1&WB_EN=0x1&WB_MASK=0xd&WB_PERIOD=16&WB_WHITELEV=0xfae1&WB_WHITEFRAC=0x028f&WB_SCALE_R=0x10000&WB_SCALE_GB=0x10000&WB_SCALE_B=0x10000&WB_THRESH=500&GAIN_MIN=0x18000&GAIN_MAX=0xfc000&ANA_GAIN_ENABLE=1&GAINR=0x10000&GAING=0x10000&GAINGB=0x10000&GAINB=0x10000" > /dev/null 2>&1
echo "/etc/init_elphel393.sh done"
exit 0
......
SUMMARY = "init scripts"
AUTHOR = "Elphel Inc."
HOMEPAGE = "http://www3.elphel.com/"
LICENSE = "GPLv3"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-3.0;md5=c79ff39f19dfec6d293b95dea7b07891"
VPATH = "${TOPDIR}/../../rootfs-elphel/elphel-init"
inherit elphel-dev
do_configure[noexec] = "1"
#do_compile[noexec] = "1"
FILES_${PN} += " ${base_prefix}/etc/* ${base_prefix}/etc/init.d/*"
INITSCRIPT_NAME = "init_elphel393"
INITSCRIPT_PARAMS = "defaults 95"
inherit update-rc.d
INITSTRING ??= "init_elphel393.sh"
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment