Move kernel patches to src

recipes-kernel/linux/linux-xlnx/ahci.patch

---- a/drivers/ata/ahci.h	2016-09-13 17:18:35.579259846 -0600
-+++ b/drivers/ata/ahci.h	2016-08-01 11:57:06.306630339 -0600
-@@ -396,6 +396,7 @@ void ahci_print_info(struct ata_host *ho
- int ahci_host_activate(struct ata_host *host, int irq,
- 		       struct scsi_host_template *sht);
- void ahci_error_handler(struct ata_port *ap);
-+irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance);
- 
- static inline void __iomem *__ahci_port_base(struct ata_host *host,
- 					     unsigned int port_no)

recipes-kernel/linux/linux-xlnx/drivers-elphel.patch

-diff -Naur a/drivers/Kconfig b/drivers/Kconfig
---- a/drivers/Kconfig	2016-01-25 18:31:43.309779723 -0700
-+++ b/drivers/Kconfig	2016-01-25 18:48:17.521798388 -0700
-@@ -182,4 +182,6 @@
- 
- source "drivers/android/Kconfig"
- 
-+source "drivers/elphel/Kconfig"
-+
- endmenu
-diff -Naur a/drivers/Makefile b/drivers/Makefile
---- a/drivers/Makefile	2016-01-25 18:31:43.309779723 -0700
-+++ b/drivers/Makefile	2016-01-25 18:50:39.545801055 -0700
-@@ -165,3 +165,6 @@
- obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt/
- obj-$(CONFIG_CORESIGHT)		+= coresight/
- obj-$(CONFIG_ANDROID)		+= android/
-+
-+obj-$(CONFIG_ELPHEL393)		+= elphel/
-+obj-$(CONFIG_ELPHELDRVONMICROZED)	+= elphel/

recipes-kernel/linux/linux-xlnx/libahci.patch

---- a/drivers/ata/libahci.c	2016-09-13 17:18:35.579259846 -0600
-+++ b/drivers/ata/libahci.c	2016-07-27 20:25:34.217095567 -0600
-@@ -1826,7 +1826,7 @@ static irqreturn_t ahci_multi_irqs_intr(
- 	return IRQ_WAKE_THREAD;
- }
- 
--static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
-+irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
- {
- 	struct ata_host *host = dev_instance;
- 	struct ahci_host_priv *hpriv;
-@@ -1885,6 +1885,7 @@ static irqreturn_t ahci_single_irq_intr(
- 
- 	return IRQ_RETVAL(handled);
- }
-+EXPORT_SYMBOL_GPL(ahci_single_irq_intr);
- 
- unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
- {

recipes-kernel/linux/linux-xlnx/si5338_vsc330x.patch

-diff -Naur a/drivers/clk/Kconfig b/drivers/clk/Kconfig
---- a/drivers/clk/Kconfig	2016-01-25 18:31:43.413779725 -0700
-+++ b/drivers/clk/Kconfig	2016-01-25 19:09:12.833821955 -0700
-@@ -59,6 +59,16 @@
- 	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
- 	  by control register.
- 
-+config COMMON_CLK_SI5338
-+	tristate "Support Silicon Laboratories SI5338 Quad Clock Generator"
-+	depends on I2C
-+	select REGMAP_I2C
-+	select RATIONAL
-+	help
-+	 Say Y here if you have a SI5338 Quad Clock Generator IC on the I2C bus.
-+	 To compile this driver as a module, choose M here: the
-+	 module will be called si5338.
-+
- config COMMON_CLK_SI5351
- 	tristate "Clock driver for SiLabs 5351A/B/C"
- 	depends on I2C
-diff -Naur a/drivers/clk/Makefile b/drivers/clk/Makefile
---- a/drivers/clk/Makefile	2016-01-25 18:31:43.413779725 -0700
-+++ b/drivers/clk/Makefile	2016-01-25 19:09:46.217822582 -0700
-@@ -35,6 +35,7 @@
- obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
- obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
- obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
-+obj-$(CONFIG_COMMON_CLK_SI5338)		+= clk-si5338.o
- obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
- obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
- obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
-diff -Naur a/drivers/misc/Kconfig b/drivers/misc/Kconfig
---- a/drivers/misc/Kconfig	2016-01-28 19:14:34.610694113 -0700
-+++ b/drivers/misc/Kconfig	2016-01-28 19:42:44.730725843 -0700
-@@ -515,6 +515,23 @@
- 	  bus. System Configuration interface is one of the possible means
- 	  of generating transactions on this bus.
- 
-+config VSC330X
-+	tristate "Support VSC330X crosspoint switch"
-+	help
-+	  Say Y here if you have a VSC30X crosspoint switch IC on the I2C bus.
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called vsc330x.
-+
-+config LTC3589
-+	tristate "Support LTC3589 voltage regulator"
-+	help
-+	  Say Y here if you have a LTC3589 voltage regulator IC on the I2C bus.
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called ltc3589. 
-+	  Developed by Elphel, Inc.. 
-+	  The default driver is found at drivers/regulator/ltc3589.c and 
-+	  enabled with CONFIG_REGULATOR_LTC3589=y
-+	  
- config XILINX_TRAFGEN
- 	tristate "Xilinx Traffic Generator"
- 	depends on MICROBLAZE || ARCH_ZYNQ
-diff -Naur a/drivers/misc/Makefile b/drivers/misc/Makefile
---- a/drivers/misc/Makefile	2016-01-28 19:14:34.610694113 -0700
-+++ b/drivers/misc/Makefile	2016-01-28 19:19:56.638700159 -0700
-@@ -58,3 +58,5 @@
- obj-$(CONFIG_ECHO)		+= echo/
- obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
- obj-$(CONFIG_CXL_BASE)		+= cxl/
-+obj-$(CONFIG_VSC330X)	        += vsc330x.o
-+obj-$(CONFIG_LTC3589)	        += ltc3589.o

recipes-kernel/linux/linux-xlnx/xilinx_emacps.c.patch

-diff -Naur a/drivers/net/ethernet/xilinx/xilinx_emacps.c b/drivers/net/ethernet/xilinx/xilinx_emacps.c
---- a/drivers/net/ethernet/xilinx/xilinx_emacps.c	2016-01-25 18:34:24.065782741 -0700
-+++ b/drivers/net/ethernet/xilinx/xilinx_emacps.c	2016-01-25 19:03:50.781815909 -0700
-@@ -479,6 +479,10 @@
- #define XEMACPS_PTP_CC_MULT		(1 << 31)
- #endif
- 
-+/* Elphel */
-+#define AT803X_PHY_ID          0x004dd072 /*Particular one, AR8035 but we'll use a broad mask */
-+#define AT803X_PHY_ID_MASK     0xffffffe0
-+
- #define xemacps_read(base, reg)						\
- 	readl_relaxed(((void __iomem *)(base)) + (reg))
- #define xemacps_write(base, reg, val)					\
-@@ -871,6 +875,49 @@
- 	return 0;
- }
- 
-+/* http://www.spinics.net/lists/devicetree/msg06322.html */
-+static int ar8035_phy_fixup(struct phy_device *dev)
-+{
-+	u16 val;
-+	struct net_local *lp = dev->bus->priv;
-+	dev_dbg(&lp->pdev->dev,"fixup start");
-+
-+	/* Ar803x phy SmartEEE feature cause link status generates glitch,
-+	* which cause ethernet link down/up issue, so disable SmartEEE
-+	*/
-+	phy_write(dev, 0xd, 0x3);
-+	phy_write(dev, 0xe, 0x805d);
-+	phy_write(dev, 0xd, 0x4003);
-+
-+	val = phy_read(dev, 0xe);
-+	phy_write(dev, 0xe, val & ~(1 << 8));
-+	/*Enable if needed */
-+#if 0
-+	/* To enable AR8031 output a 125MHz clk from CLK_25M */
-+	phy_write(dev, 0xd, 0x7);
-+	phy_write(dev, 0xe, 0x8016);
-+	phy_write(dev, 0xd, 0x4007);
-+
-+	val = phy_read(dev, 0xe);
-+	val &= 0xffe3;
-+	val |= 0x18;
-+	phy_write(dev, 0xe, val);
-+#endif
-+/* Next one what is really needed for Elphel 393 */
-+	/* introduce tx clock delay */
-+	phy_write(dev, 0x1d, 0x5);
-+	val = phy_read(dev, 0x1e);
-+	val |= 0x0100;
-+	phy_write(dev, 0x1e, val);
-+
-+	/*check phy power*/
-+	val = phy_read(dev, 0x0);
-+	if (val & BMCR_PDOWN)
-+		phy_write(dev, 0x0, val & ~BMCR_PDOWN);
-+	dev_dbg(&lp->pdev->dev,"fixup end");
-+	return 0;
-+}
-+
- /**
-  * xemacps_mii_init - Initialize and register mii bus to network device
-  * @lp: local device instance pointer
-@@ -883,6 +930,8 @@
- 	struct device_node *np = of_get_parent(lp->phy_node);
- 	struct device_node *npp;
- 
-+	phy_register_fixup_for_uid(AT803X_PHY_ID,  AT803X_PHY_ID_MASK,  ar8035_phy_fixup);
-+	
- 	lp->mii_bus = of_mdio_find_bus(np);
- 	if (!lp->has_mdio && lp->mii_bus)
- 		return 0;

recipes-kernel/linux/linux-xlnx/xilinx_uartps.c.patch

-diff -Naur a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
---- a/drivers/tty/serial/xilinx_uartps.c	2016-02-19 13:41:58.380680377 -0700
-+++ b/drivers/tty/serial/xilinx_uartps.c	2016-02-19 13:47:50.776674338 -0700
-@@ -704,6 +704,9 @@
- 	ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
- 	cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
- 
-+	while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
-+			(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
-+		cpu_relax();
- 	/*
- 	 * Clear the RX disable and TX disable bits and then set the TX enable
- 	 * bit and RX enable bit to enable the transmitter and receiver.

recipes-kernel/linux/linux-xlnx_4.0.bbappend

-FILESEXTRAPATHS_append := "${THISDIR}/linux-xlnx:"
+FILESEXTRAPATHS_append := "${TOPDIR}/../../linux-elphel/src/patches:"
 FILESEXTRAPATHS_prepend := "${THISDIR}/config:"
 
 SRC_URI_append += " file://xilinx_emacps.c.patch"
@@ -168,4 +168,3 @@ sysroot_stage_all_append() {
 
 ## And you'd then use -I=/usr/myheaders/include to reference the sysroot
 ## copy of those headers.
-