Skip to content

M
meta-elphel393
Commit 20c5cbad authored by Oleg Dzhimiev's avatar Oleg Dzhimiev
Browse files
Options

rootfs on mmc

parent 57d3f4d3
Show whitespace changes
Inline Side-by-side
Showing with 512 additions and 3 deletions
conf/machine/boards/elphel393/elphel393.dts
View file @ 20c5cbad
......@@ -10,8 +10,8 @@
serial0 = &ps7_uart_0;
} ;
chosen {
/* bootargs = "console=ttyPS0,115200 debug root=/dev/ram rw ip=192.168.0.9 earlyprintk ramdisk_size=131072";*/
bootargs = "cma=128M console=ttyPS0,115200 root=/dev/ram rw ip=192.168.0.8 earlyprintk ramdisk_size=262144";
/* bootargs = "console=ttyPS0,115200 debug root=/dev/ram rw ip=192.168.0.9 earlyprintk ramdisk_size=262144";*/
bootargs = "cma=128M console=ttyPS0,115200 root=/dev/mmcblk0p2 rw ip=192.168.0.8 earlyprintk rootwait rootfstype=ext4";
linux,stdout-path = "/amba@0/serial@e0000000";
} ;
cpus {
......
conf/machine/boards/elphel393/elphel393_ramdisk.dts 0 → 100644
View file @ 20c5cbad
/* */
/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynq-7000";
model = "Elphel 10393";
aliases {
ethernet0 = &ps7_ethernet_0;
serial0 = &ps7_uart_0;
} ;
chosen {
/* bootargs = "console=ttyPS0,115200 debug root=/dev/ram rw ip=192.168.0.9 earlyprintk ramdisk_size=131072";*/
bootargs = "cma=128M console=ttyPS0,115200 root=/dev/ram rw ip=192.168.0.8 earlyprintk ramdisk_size=262144";
linux,stdout-path = "/amba@0/serial@e0000000";
} ;
cpus {
#address-cells = <1>;
#size-cells = <0>;
ps7_cortexa9_0: cpu@0 {
bus-handle = <&ps7_axi_interconnect_0>;
clock-latency = <1000>;
clocks = <&clkc 3>;
compatible = "arm,cortex-a9";
d-cache-line-size = <0x20>;
d-cache-size = <0x8000>;
device_type = "cpu";
i-cache-line-size = <0x20>;
i-cache-size = <0x8000>;
interrupt-handle = <&ps7_scugic_0>;
cpu0-supply = <&regulator_vccpint>;
reg = <0x0>;
operating-points = <
666667 1000000
333334 1000000
>;
} ;
ps7_cortexa9_1: cpu@1 {
bus-handle = <&ps7_axi_interconnect_0>;
clocks = <&clkc 3>;
compatible = "arm,cortex-a9";
d-cache-line-size = <0x20>;
d-cache-size = <0x8000>;
device_type = "cpu";
i-cache-line-size = <0x20>;
i-cache-size = <0x8000>;
interrupt-handle = <&ps7_scugic_0>;
reg = <0x1>;
} ;
} ;
pmu {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 5 4>, <0 6 4>;
reg = <0xf8891000 0x1000>, <0xf8893000 0x1000>;
reg-names = "cpu0", "cpu1";
} ;
regulator_vccpint: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "VCCPINT";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
} ;
ps7_ddr_0: memory@0 {
device_type = "memory";
reg = <0x0 0x40000000>;
} ;
ps7_axi_interconnect_0: amba@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,ps7-axi-interconnect-1.00.a", "simple-bus";
ranges ;
ps7_afi_0: ps7-afi@f8008000 {
compatible = "xlnx,ps7-afi-1.00.a";
reg = <0xf8008000 0x1000>;
} ;
ps7_afi_1: ps7-afi@f8009000 {
compatible = "xlnx,ps7-afi-1.00.a";
reg = <0xf8009000 0x1000>;
} ;
ps7_afi_2: ps7-afi@f800a000 {
compatible = "xlnx,ps7-afi-1.00.a";
reg = <0xf800a000 0x1000>;
} ;
ps7_afi_3: ps7-afi@f800b000 {
compatible = "xlnx,ps7-afi-1.00.a";
reg = <0xf800b000 0x1000>;
} ;
ps7_ddrc_0: ps7-ddrc@f8006000 {
compatible = "xlnx,zynq-ddrc-a05";
reg = <0xf8006000 0x1000>;
xlnx,has-ecc = <0x0>;
} ;
ps7_dev_cfg_0: ps7-dev-cfg@f8007000 {
clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
compatible = "xlnx,zynq-devcfg-1.0", "xlnx,ps7-dev-cfg-1.00.a";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 8 4>;
reg = <0xf8007000 0x100>;
syscon = <&ps7_slcr_0>;
} ;
ps7_dma_s: ps7-dma@f8003000 {
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <4>;
arm,primecell-periphid = <0x41330>;
clock-names = "apb_pclk";
clocks = <&clkc 27>;
compatible = "arm,pl330", "arm,primecell", "xlnx,ps7-dma-1.00.a";
interrupt-parent = <&ps7_scugic_0>;
interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7";
interrupts = <0 13 4>, <0 14 4>, <0 15 4>, <0 16 4>, <0 17 4>, <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>;
reg = <0xf8003000 0x1000>;
} ;
ps7_ethernet_0: ps7-ethernet@e000b000 {
#address-cells = <1>;
#size-cells = <0>;
clock-names = "ref_clk", "aper_clk";
clocks = <&clkc 13>, <&clkc 30>;
compatible = "xlnx,ps7-ethernet-1.00.a";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 22 4>;
local-mac-address = [00 0a 35 00 00 00];
phy-handle = <&phy3>;
phy-mode = "rgmii-id";
reg = <0xe000b000 0x1000>;
xlnx,enet-reset = <0xffffffff>;
xlnx,eth-mode = <0x1>;
xlnx,has-mdio = <0x1>;
xlnx,ptp-enet-clock = <111111115>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy3: phy@3 {
compatible = "atheros,8035";
device_type = "ethernet-phy";
reg = <0x3>;
} ;
} ;
} ;
ps7_i2c_0: ps7-i2c@e0004000 {
bus-id = <0>;
clocks = <&clkc 38>;
compatible = "cdns,i2c-r1p10", "xlnx,ps7-i2c-1.00.a";
i2c-clk = <400000>;
input-clk = <111111114>;
interrupt-parent = <&ps7_scugic_0>;
interrupts = < 0 25 4 >;
reg = < 0xe0004000 0x1000 >;
xlnx,has-interrupt = <0x0>;
xlnx,i2c-clk-freq-hz = <0x69f6bcb>;
xlnx,i2c-reset = "";
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "stm,m41t62";
reg = <0x68>;
};
vsc330x@1 {
compatible = "vsc,vsc3304";
reg = <0x01>;
vsc330x,configuration_name = "elphel393: from external";
/* configuration below is for external eSATA host accessing SSD. Will chnage
* when the SATA controller code will be operational
* TODO: specify optimal drive strength, pre-emphasis, etc.
* All parameters are exported to sysfs for run-time modification
*/
vsc330x,configuration_data=<
0x11080101 /*page 0x11, register 0x08, data=0x1 (inverted input), write enabled mask=0x1 */
0x11090001
0x110a0101
0x110b0101
0x110e0001
0x110f0101
0x230a0b1f /* set output mode for port 10 as non-inverted, forwarding OOB enabled */
0x230b151f /* set output mode for port 11 as inverted, forwarding OOB enabled */
0x230c151f
0x230d0b1f
0x230e151f
0x230f151f
0xff750101 /* freeze configuration to enable simultaneous modification */
0x110e0002 /* enable channel 14 input */
0x11090002 /* enable channel 9 input */
0x000b091f /* connect port 11 output to input 9 */
0x000c0e1f /* connect port 12 output to input 14 */
0xff750001 /* un-freeze configuration to apply connection modifications */
>;
};
si5338@70 {
compatible = "sil,si5338";
reg = <0x70>;
si5338,init="always"; /* initialize PLL if chip was not programmed, wait for lock. Other option is 'if off' */
/* low-level masked register writes, may be used to load frequency plan */
/*si5338,configuration_data=< 0x1ffcf0 >;*/ /* just for testing: write data 0xfc with write enable mask 0xf0 to register 0x01f */
si5338,in_frequency3= < 25000000>; /* 25MHz on input 3 (other inputs are '12",'4','56' and '12xo' */
/* PLL may be set either directly (pll_freq_fract,pll_freq_int) or to match some output (pll_by_out_fract, pll_by_out_int)
* _int suffix forces to find integer divisors, _fract - allows fractional ones */
si5338,pll_by_out_int=<150000000>; /* 150Mhz May have 3 values: integer, nominator and denominator */
si5338,out3_freq_int= <150000000>; /* 150Mhz. May have 3 values: integer, nominator and denominator */
si5338,out2_select= "in3/2/32"; /* connect out2 to IN3, divided by 2 (input stage) and then by 32 (output stage)*/
si5338,2V5_LVPECL= <1 2>; /* set output standard for channels 1 and 2 */
si5338,1V5_HSTL_A+= <0>; /* set output standard for channel 0, only A output is used (noninverted) */
si5338,1V8_LVDS= <3>;
/* Disabled state for outputs: */
si5338,dis_hi-z= <0 1 2 3>; /* Disabled state for listed outputs, also possible: "dis_hi-z","dis_low","dis_high","dis_always_on" */
si5338,output_en= < 3>; /* Which outputs should be initially enabled */
si5338,spread_spectrum_3= <1 50 31500>; /* Set spread spectrum for channel3 : enabled, 0.5%, 31.5KHz */
si5338,out0_freq_int= <15000000>; /* 15Mhz to output 0 */
si5338,spread_spectrum_0= <1 500 31500>; /* Set spread spectrum for channel0 : enabled, 5%, 31.5KHz - high value, for testing */
};
ltc3589@34 {
compatible = "ltc,ltc3589";
reg = <0x34>;
};
gpio@20{
compatible = "ti,tca6408";
reg = <0x20>;
};
gpio@21{
compatible = "ti,tca6408";
reg = <0x21>;
};
/* Use 'spd' instead of '24c02' for read only access*/
stts2002@31 {
compatible = "at,24c02";
reg = <0x31>;
};
hwmon@19 { /*hwmon@19*/
compatible = "stm,jc42";
reg = <0x19>;
};
} ;
ps7_gpio_0: ps7-gpio@e000a000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
clocks = <&clkc 42>;
compatible = "xlnx,zynq-gpio-1.0", "xlnx,ps7-gpio-1.00.a";
emio-gpio-width = <64>;
gpio-controller ;
gpio-mask-high = <0x0>;
gpio-mask-low = <0x0>;
interrupt-controller;
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 20 4>;
reg = <0xe000a000 0x1000>;
} ;
ps7_iop_bus_config_0: ps7-iop-bus-config@e0200000 {
compatible = "xlnx,ps7-iop-bus-config-1.00.a";
reg = <0xe0200000 0x1000>;
} ;
ps7_pl310_0: ps7-pl310@f8f02000 {
arm,data-latency = <3 2 2>;
arm,tag-latency = <2 2 2>;
cache-level = <2>;
cache-unified ;
compatible = "xlnx,ps7-pl310-1.00.a", "arm,pl310-cache";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 2 4>;
reg = <0xf8f02000 0x1000>;
} ;
ps7_ram_0: ps7-ram@0 {
compatible = "xlnx,ps7-ram-1.00.a", "xlnx,ps7-ocm";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 3 4>;
reg = <0xfffc0000 0x40000>;
} ;
ps7_scugic_0: ps7-scugic@f8f01000 {
#address-cells = <2>;
#interrupt-cells = <3>;
#size-cells = <1>;
compatible = "xlnx,ps7-scugic-1.00.a", "arm,cortex-a9-gic", "arm,gic";
interrupt-controller ;
num_cpus = <2>;
num_interrupts = <96>;
reg = <0xf8f01000 0x1000>, <0xf8f00100 0x100>;
} ;
ps7_globaltimer_0: ps7-globaltimer@f8f00200 {
clocks = <&clkc 4>;
compatible = "arm,cortex-a9-global-timer", "xlnx,ps7-globaltimer-1.00.a";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <1 11 0x301>;
reg = <0xf8f00200 0x100>;
} ;
ps7_scutimer_0: ps7-scutimer@f8f00600 {
clocks = <&clkc 4>;
compatible = "arm,cortex-a9-twd-timer", "xlnx,ps7-scutimer-1.00.a";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <1 13 0x301>;
reg = <0xf8f00600 0x20>;
} ;
ps7_scuwdt_0: ps7-scuwdt@f8f00620 {
clocks = <&clkc 4>;
compatible = "xlnx,ps7-scuwdt-1.00.a";
device_type = "watchdog";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <1 14 0x301>;
reg = <0xf8f00620 0xe0>;
} ;
ps7_wdt_0: ps7-wdt@f8005000 {
clocks = <&clkc 45>;
compatible = "cdns,wdt-r1p2", "xlnx,zynq-wdt-r1p2";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 9 4>;
reg = <0xf8005000 0x1000>;
reset = <0>;
timeout-sec = <10>;
} ;
ps7_sd_0: ps7-sdio@e0100000 {
clock-frequency = <0x7735940>;
clock-names = "clk_xin", "clk_ahb", "ref_clk", "aper_clk";
clocks = <&clkc 21>, <&clkc 32>, <&clkc 21>, <&clkc 32>;
compatible = "arasan,sdhci-8.9a", "arasan,sdhci", "generic-sdhci", "xlnx,ps7-sdio-1.00.a";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 24 4>;
reg = <0xe0100000 0x1000>;
xlnx,has-cd = <0x1>;
xlnx,has-power = <0x0>;
xlnx,has-wp = <0x1>;
xlnx,sdio-clk-freq-hz = <0x3f93e10>;
/*wp-inverted;*/
} ;
ps7_slcr_0: ps7-slcr@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynq-slcr", "syscon", "simple-bus", "xlnx,ps7-slcr-1.00.a";
ranges ;
reg = <0xf8000000 0x1000>;
clkc: clkc@100 {
#clock-cells = <1>;
clock-output-names = "armpll", "ddrpll", "iopll",
"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
"ddr2x", "ddr3x", "dci",
"lqspi", "smc", "pcap",
"gem0", "gem1",
"fclk0", "fclk1", "fclk2", "fclk3",
"can0", "can1",
"sdio0", "sdio1",
"uart0", "uart1",
"spi0", "spi1",
"dma",
"usb0_aper", "usb1_aper",
"gem0_aper", "gem1_aper",
"sdio0_aper", "sdio1_aper",
"spi0_aper", "spi1_aper",
"can0_aper", "can1_aper",
"i2c0_aper", "i2c1_aper",
"uart0_aper", "uart1_aper",
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
"dbg_trc", "dbg_apb";
compatible = "xlnx,ps7-clkc";
fclk-enable = <0xf>;
ps-clk-frequency = <33333333>;
reg = <0x100 0x100>;
} ;
rstc: rstc@200 {
compatible = "xlnx,zynq-reset";
reg = <0x200 0x48>;
#reset-cells = <1>;
syscon = <&ps7_slcr_0>;
} ;
pinctl0: pinctrl@700 {
compatible = "xlnx,pinctrl-zynq";
reg = <0x700 0x200>;
syscon = <&ps7_slcr_0>;
} ;
} ;
ps7_ttc_0: ps7-ttc@f8001000 {
clocks = <&clkc 6>;
compatible = "cdns,ttc", "xlnx,ps7-ttc-1.00.a";
interrupt-names = "ttc0", "ttc1", "ttc2";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
reg = <0xf8001000 0x1000>;
} ;
ps7_smcc_0: ps7-smcc@e000e000 {
#address-cells = <1>;
#size-cells = <1>;
clock-names = "memclk", "aclk";
clocks = <&clkc 11>, <&clkc 44>;
compatible = "arm,pl353-smc-r2p1";
interrupt-parent = <&ps7_scugic_0>;
interrupts = < 0 18 4 >;
ranges ;
reg = < 0xe000e000 0x1000 >;
arm,addr25 = <0x0>;
arm,nor-chip-sel0 = <0x0>;
arm,nor-chip-sel1 = <0x0>;
arm,sram-chip-sel0 = <0x0>;
arm,sram-chip-sel1 = <0x0>;
ps7_nand_0: ps7-nand@e1000000 {
compatible = "arm,pl353-nand-r2p1";
reg = < 0xe1000000 0x1000000 >;
/*arm,nand-clk-freq-hz = <0x5f5e100>;*/
arm,nand-width = <0x8>;
arm,nand-cycle-t0 = <0x4>;
arm,nand-cycle-t1 = <0x4>;
arm,nand-cycle-t2 = <0x1>;
arm,nand-cycle-t3 = <0x2>;
arm,nand-cycle-t4 = <0x2>;
arm,nand-cycle-t5 = <0x2>;
arm,nand-cycle-t6 = <0x4>;
#address-cells = <0x1>;
#size-cells = <0x1>;
partition@0 {
label = "u-boot-spl";
reg = <0x0 0x100000>;/*1MB for backup spl image(s)*/
};
partition@1 {
label = "u-boot";
reg = <0x100000 0x400000>;/*4MB*/
};
partition@2 {
label = "device-tree";
reg = <0x500000 0x100000>;/*1MB*/
};
partition@3 {
label = "kernel";
reg = <0x600000 0x1000000>;/*16MB*/
};
partition@4 {
label = "rootfs";
reg = <0x1600000 0x4000000>;/*64MB*/
};
} ;
} ;
ps7_uart_0: serial@e0000000 {
clock-names = "uart_clk", "pclk", "ref_clk", "aper_clk";
clocks = <&clkc 23>, <&clkc 40>, <&clkc 23>, <&clkc 40>;
compatible = "xlnx,xuartps", "cdns,uart-r1p8", "xlnx,ps7-uart-1.00.a";
device_type = "serial";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 27 4>;
reg = <0xe0000000 0x1000>;
port-number = <1>;
current-speed = <115200>;
xlnx,has-modem = <0x0>;
} ;
ps7_usb_0: ps7-usb@e0002000 {
clocks = <&clkc 28>;
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2", "xlnx,ps7-usb-1.00.a", "xlnx,zynq-usb-1.00.a";
reg = <0xe0002000 0x1000>;
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 21 4>;
dr_mode = "host";
phy_type = "ulpi";
} ;
ps7_xadc: ps7-xadc@f8007100 {
clocks = <&clkc 12>;
compatible = "xlnx,zynq-xadc-1.00.a", "xlnx,ps7-xadc-1.00.a";
reg = <0xf8007100 0x20>;
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0 7 4>;
} ;
elphel_ahci: elphel-ahci@80000000 {
compatible = "elphel,elphel-ahci";
interrupt-parent = <&ps7_scugic_0>;
interrupts = <0x0 0x1d 0x4>;
reg = <0x80000000 0x1000>;
clb_offs = <0x800>;
fb_offs = <0xc00>;
};
} ;
elphel393_pwr: elphel393-pwr@0 {
compatible = "elphel,elphel393-pwr-1.00";
elphel393_pwr,simulate= <0>;
elphel393_pwr,i2c_chips= <0x20 0x21 0x34>;
elphel393_pwr,vp15.r1= <357000>;
elphel393_pwr,vp15.r2= <287000>;
elphel393_pwr,vcc_sens01.r1= <787000>;
elphel393_pwr,vcc_sens01.r2= <287000>;
elphel393_pwr,vcc_sens23.r1= <787000>;
elphel393_pwr,vcc_sens23.r2= <287000>;
elphel393_pwr,vp5.r1= <523000>;
elphel393_pwr,vp5.r2= <100000>;
elphel393_pwr,vldo18.r1= <357000>;
elphel393_pwr,vldo18.r2= <287000>;
elphel393_pwr,channels_disable= "vcc_sens23 vp33sens23";
elphel393_pwr,pinstrapped_oven= <1>;
elphel393_pwr,vcc_sens01_mv= <2800>; /* set sensor intreface voltage to 2.8V */
elphel393_pwr,channels_enable= "vcc_sens01 vp33sens01";
} ;
elphel393_mem: elphel393-mem@0 {
compatible = "elphel,elphel393-mem-1.00";
memsize = <25600>;
} ;
} ;
recipes-core/images/core-image-elphel393.bb
View file @ 20c5cbad
......@@ -11,6 +11,7 @@ IMAGE_INSTALL_append += " python-core \
i2c-tools \
mtd-utils \
mtd-utils-misc \
mtd-utils-ubifs \
hdparm \
ethtool \
net-tools \
......@@ -39,7 +40,12 @@ inherit core-image
IMAGE_ROOTFS_SIZE = "262144"
#IMAGE_FSTYPES = "jffs2 ext2.gz"
#IMAGE_FSTYPES = "ext2.gz.u-boot tar.gz"
IMAGE_FSTYPES = "tar.gz"
#MKUBIFS_ARGS = " -m 2048 -e 129024 -c 1996"
#UBINIZE_ARGS = " -m 2048 -p 128KiB -s 512"
#IMAGE_FSTYPES = "ext2.gz ext2.gz.u-boot tar.gz"
create_symlinks_append(){
if not os.path.isdir("${DEPLOY_DIR_IMAGE}/${PRODUCTION_DIR}"):
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment